To calculate the amount of [tex]KCIO_{3}[/tex] that must be reacted to transfer -34.2 kJ of heat, we can use the balanced chemical equation and the given ∆H value: 0.764 moles of [tex]KCIO_{3}[/tex] must be reacted to transfer -34.2 kJ of heat.
2 [tex]KCIO_{3}[/tex](s) → 2 KCl(s) + 3 O2(g) ∆H = -89.4 kJ
We can see from the balanced equation that for every 2 moles of [tex]KCIO_{3}[/tex] reacted, -89.4 kJ of heat is transferred. To determine the amount of [tex]KCIO_{3}[/tex] needed to transfer -34.2 kJ of heat, we can set up a proportion:
2 moles [tex]KCIO_{3}[/tex] / -89.4 kJ = x moles [tex]KCIO_{3}[/tex] / -34.2 kJ
Solving for x, we get:
x = (2 moles [tex]KCIO_{3}[/tex] / -89.4 kJ) x (-34.2 kJ) = 0.764 moles [tex]KCIO_{3}[/tex]
Therefore, 0.764 moles of [tex]KCIO_{3}[/tex] must be reacted to transfer -34.2 kJ of heat.
Learn more about chemical equation
https://brainly.com/question/19626681
#SPJ4
Which salt would form an acidic solution when dissolved in water? The Ka of NH: is 5.6 × 10-10 and the Kb of CN-is 1.6×10- Select the correct answer below ○ NH,CN O Naci O NH, Br O More than one solution will be acidic.
The salt that would form an acidic solution when dissolved in water is NH₄CN.
Why would NH₄CN form an acidic solution when dissolved in water?NH₄CN consists of the ammonium ion (NH⁴⁺) and the cyanide ion (CN⁻). NH⁴⁺ is the conjugate acid of NH₃ (ammonia. Ammonia is commonly recognised as a weak base. CN⁻ is the conjugate base of HCN (hydrogen cyanide), which is a weak acid.
The Ka of NH⁴⁺ is 5.6 × 10-10, which means that NH⁴⁺ is a weak acid. The Kb of CN⁻ is 1.6 × 10-5, which means that CN⁻ is a weak base.
When NH₄CN is dissolved in water, NH⁴⁺ can donate a proton to water to form H3O⁺ (hydronium ion) and NH₃, making the solution acidic.
Therefore, NH₄CN would form an acidic solution when dissolved in water.
Learn more about acidic solutions here:
https://brainly.com/question/13632841
#SPJ1
Rank the following compounds in order of increasing strength of intermolecular forces. HF
HCI
H2
F2 Select one:
(A) H2 < HCI < HF < F2
(B) HF < F2 < HCI < H2
(C) H2< F2 < HCI < HE
(D) HCI < HF < < F2 < H2
Compounds in order of increasing strength of intermolecular forces H2 < HCI < HF < F2
The strength of intermolecular forces depends on the type of forces present. Hydrogen bonds are the strongest, followed by dipole-dipole interactions, and then London dispersion forces. H2 and F2 have nonpolar covalent bonds, so they only exhibit London dispersion forces. Since H2 has a smaller molar mass than F2, it has weaker London dispersion forces.
HCl is a polar molecule, resulting in dipole-dipole interactions, which are stronger than London dispersion forces. HF forms hydrogen bonds, which are the strongest intermolecular forces among the given compounds. The presence of F, a highly electronegative element, enables HF to form strong hydrogen bonds, resulting in the highest intermolecular force strength.
To learn more about intermolecular forces click here
brainly.com/question/9007693
#SPJ11
Which one of the following species will have a negligible effect on the pH of an aqueous solution? A. Bro B. CI- C. NH" D. CO32- E. CH3C00
The species that will have a negligible effect on the pH of an aqueous solution is CI⁻ (chloride ion). The correct answer is option B.
Chloride ion (Cl⁻) is a conjugate base of a strong acid (HCl), and therefore it is a very weak base. In an aqueous solution, Cl⁻ ion does not readily accept protons (H⁺ ions) from water molecules, and it does not affect the pH of the solution to a significant extent.
On the other hand, the other species listed are either weak bases or weak acids that can affect the pH of the solution to varying degrees.
NH3 is a weak base that can react with water to form NH₄⁺ and OH⁻ ions, and thereby increase the pH of the solution. CO₃²⁻ is a strong base that can accept protons from water molecules to form HCO³⁻ and OH⁻ ions, and thereby increase the pH of the solution. CH₃COO⁻ is a weak acid that can donate protons to water molecules to form H₃O⁺ and acetate ions, and thereby decrease the pH of the solution. Br⁻ is a weaker base than NH³ but still more basic than Cl⁻. Therefore, it can also affect the pH of the solution to some extent, although to a lesser extent than NH₃ or CO₃²⁻.Therefore option B is correct.
Learn more about pH here:
https://brainly.com/question/14359560
#SPJ11
What makes up nearly all of the atom's mass?
OA. The sum of all neutrons and electrons
OB. The sum of all protons and electrons
OC. The sum of all isotopes
OD. The sum of all protons and neutrons
SUBMIT
The total of all protons and neutrons is Option D, which is the right response. Protons, neutrons, and electrons are the three fundamental particles that make up an atom.
The nucleus of an atom is made up of protons and neutrons, which are collectively referred to as nucleons and are primarily responsible for an atom's mass. Neutrons weigh 1.6749 x 10-27 kg, whereas protons weigh 1.6726 x 10-27 kg.
Protons and neutrons make up the majority of an atom's mass when added together. However, electrons contribute very little to the mass of the atom due to their much smaller mass of 9.11 x 10-31 kg. As a result, Option D is the right response.
Learn more about neutrons at:
https://brainly.com/question/28992636
#SPJ1
if 25.0 ml of 0.19 m nh3 (kb = 1.8 x 10-5) is used to titrate 0.048 l of 0.33 m hci, the ph is
The pH of the solution at the end of the titration is 9.32.
To solve this problem, we will use the balanced chemical equation for the reaction between NH3 and HCl:
NH3 (aq) + HCl (aq) → NH4Cl (aq)
From this equation, we can see that one mole of NH3 reacts with one mole of HCl to form one mole of NH4Cl. Therefore, we can use the following equation to determine the number of moles of HCl that react with the given amount of NH3:
moles of HCl = (volume of HCl) × (molarity of HCl)
moles of HCl = 0.048 L × 0.33 mol/L = 0.01584 mol
Since NH3 and HCl react in a 1:1 mole ratio, the number of moles of NH3 used in the titration is also 0.01584 mol.
Now we can use the equilibrium constant expression for the reaction between NH3 and water to determine the concentration of OH- ions produced by the reaction of NH3 with water:
Kb = [NH4+][OH-]/[NH3]
Since we are given the initial concentration of NH3, we can assume that the concentration of NH3 at equilibrium is approximately equal to the initial concentration. Therefore:
Kb = [NH4+][OH-]/(0.19 M)
The concentration of NH4+ can be assumed to be negligible compared to the concentration of NH3. Therefore, we can simplify the expression:
Kb = [OH-]^2/(0.19 M)
Solving for [OH-], we get:
[OH-] = sqrt(Kb × 0.19 M) = sqrt(1.8 × 10^-5 × 0.19) = 1.53 × 10^-3 M
Now we can use the fact that NH3 is a weak base and that the reaction between NH3 and HCl is an acid-base neutralization reaction to determine the pH of the solution at the end of the titration. At the equivalence point, all of the NH3 has reacted with the HCl to form NH4Cl. Therefore, the concentration of NH3 at the equivalence point is zero, and the concentration of NH4+ is equal to the number of moles of NH3 used in the titration divided by the total volume of the solution:
[NH4+] = (0.01584 mol)/(0.025 L + 0.048 L) = 0.161 M
Now we can use the fact that NH4+ is a weak acid and that the equilibrium constant expression for its reaction with water is:
Ka = [NH3][H+]/[NH4+]
Since we know the concentration of NH4+ and we can assume that the concentration of NH3 at equilibrium is approximately equal to its initial concentration, we can simplify the expression:
Ka = [NH3][H+]/(0.161 M)
Solving for [H+], we get:
[H+] = Ka × (0.161 M)/[NH3] = (5.7 × 10^-10) × (0.161 M)/(0.19 M) = 4.83 × 10^-10 M
Finally, we can calculate the pH of the solution using the pH formula:
pH = -log[H+] = -log(4.83 × 10^-10) = 9.32
Therefore, the pH of the solution at the end of the titration is 9.32.
Click the below link, to learn more about pH of solution:
https://brainly.com/question/30934747
#SPJ11
in a titration of 28.0 ml of a 0.425 m solution of a diprotic acid h₂c₄h₄o₆ (tartaric acid) with 0.155 m lioh, how many ml of base are required to reach the first equivalence point?
Titration is a laboratory technique used to determine the concentration of a substance in a solution. It involves the controlled addition of one solution (known as the titrant) to another solution (the analyte) until the reaction between the two is complete. 14.7 mL of LiOH solution is required to reach the first equivalence point in the titration.
To determine the volume of base (LiOH) required to reach the first equivalence point in the titration of a diprotic acid (tartaric acid), we need to consider the stoichiometry of the reaction and the concentration of the acid.
The balanced chemical equation for the reaction between tartaric acid (H₂C₄H₄O₆) and LiOH is as follows:
H₂C₄H₄O₆ + 2LiOH → Li₂C₄H₄O₆ + 2H₂O
From the balanced equation, we can see that 1 mole of tartaric acid reacts with 2 moles of LiOH.
Given:
Volume of tartaric acid solution (H₂C₄H₄O₆) = 28.0 mL = 0.0280 L
The concentration of a tartaric acid solution (H₂C₄H₄O₆) = 0.425 M
The concentration of LiOH solution = 0.155 M
To find the volume of LiOH solution required, we can use the following equation, which relates the moles and molarity of the substances involved:
Moles of tartaric acid = Moles of LiOH
Moles of tartaric acid = (Concentration of tartaric acid) × (Volume of tartaric acid)
Moles of LiOH = (Concentration of LiOH) × (Volume of LiOH)
Since the stoichiometric ratio between tartaric acid and LiOH is 1:2, we can set up the following equation:
(Concentration of tartaric acid) × (Volume of tartaric acid) = 2 × (Concentration of LiOH) × (Volume of LiOH)
Plugging in the given values, we have:
(0.425 M) × (0.0280 L) = 2 × (0.155 M) × (Volume of LiOH)
Solving for the volume of LiOH:
Volume of LiOH = [(0.425 M) × (0.0280 L)] / [(2) × (0.155 M)]
Volume of LiOH = 0.0147 L = 14.7 mL
Therefore, 14.7 mL of LiOH solution is required to reach the first equivalence point in the titration.
For more details regarding titration, visit:
https://brainly.com/question/31271061
#SPJ12
Equation for free energy change associated with transport across a concentration gradient when a species is charged
The equation ΔG = RTln(C2/C1) + zFΔψ is commonly known as the Nernst equation and is used to calculate the free energy change associated with transport of a charged species across a membrane.
The Nernst equation for free energy change associated with transport across a concentration gradient when a species is charged is given by ΔG = RTln(C2/C1) + zFΔψ, where ΔG is the change in free energy, R is the gas constant, T is the temperature, C1 and C2 are the concentrations of the species on either side of the membrane, z is the charge of the species, F is the Faraday constant, and Δψ is the membrane potential. This equation takes into account both the concentration gradient and the electrical potential across the membrane, and shows that transport of a charged species is dependent on both factors. The concentration gradient is the difference in the concentration of the species on either side of the membrane. If the concentration of the species is higher on one side of the membrane than the other, then the species will tend to move from the side of higher concentration to the side of lower concentration. This movement of the species is known as diffusion.
To know more about Nernst equation please refer: https://brainly.com/question/30891307
#SPJ11
(2S,5S)-2-bromo-5-chlorohexane
* Use only one equivalent of NaI
A) Draw the major SN2 product when the substrate above is treated with sodium iodie in acetone.
B) Name the product above.
A) The major SN2 product will be (2R,5S)-2-iodo-5-chlorohexane.
B) The name of the product is (2R,5S)-2-iodo-5-chlorohexane.
A) To draw the major SN2 product when (2S,5S)-2-bromo-5-chlorohexane is treated with one equivalent of sodium iodide (NaI) in acetone, follow these steps:
1. Identify the substrate: (2S,5S)-2-bromo-5-chlorohexane
2. Identify the nucleophile: Sodium iodide (NaI)
3. Choose the most reactive electrophilic site for the reaction: The bromine atom at the 2 position is more reactive than the chlorine atom at the 5 position because iodide is a better nucleophile than chloride.
4. Perform the SN2 reaction: The iodide ion (I-) will displace the bromine atom at the 2 position through an SN2 mechanism, inverting the stereochemistry at the carbon.
5. Draw the product: The major SN2 product will be (2R,5S)-2-iodo-5-chlorohexane.
B) The name of the product is (2R,5S)-2-iodo-5-chlorohexane.
learn more about acetone Refer: https://brainly.com/question/13334667
#SPJ11
what are the product(s) from the reaction of compound a with kmno4 in acid?Dicarboxylic AcidCarboxylic Acid and CO2Ketone and AldehydeKetone and CO2
The product from the reaction of compound A with KMnO₄ in acid would be dicarboxylic acid, carboxylic acid, and CO₂ (Option A).
KMnO₄ in acid is a strong oxidizing agent that would convert any aldehyde or ketone functional groups into carboxylic acid functional groups. In the case of compound A, which has two carbonyl functional groups, both of them would be converted into carboxylic acid functional groups, resulting in the formation of dicarboxylic acid. The reaction would also produce CO₂ as a byproduct. Therefore, the product(s) from the reaction of compound A with KMnO₄ in acid are dicarboxylic acid, carboxylic acid, and CO₂.
Learn more about dicarboxylic acid: https://brainly.com/question/28265580
#SPJ11
0.175 moles of calcium nitrate are dissolved in a total of 50.00 ml of solution. a) calculate the molarity of the solution. b) how many grams of calcium nitrate are dissolved in this solution?
a) To calculate the molarity of the solution, use the formula: Molarity = moles of solute / volume of solution in liters.
Given 0.175 moles of calcium nitrate and 50.00 mL of solution, first convert the volume to liters: 50.00 mL * (1 L / 1000 mL) = 0.050 L, Now, calculate the molarity: Molarity = 0.175 moles / 0.050 L = 3.50 M. So, the molarity of the solution is 3.50 M.
(b) To find the grams of calcium nitrate dissolved in the solution, first determine the molar mass of calcium nitrate (Ca(NO₃)₂):
Ca = 40.08 g/mol
N = 14.01 g/mol
O = 16.00 g/mol.
Molar mass of Ca(NO₃)₂ = 40.08 + 2(14.01 + 3(16.00)) = 164.10 g/mol
Now, multiply the moles of calcium nitrate by its molar mass: 0.175 moles * 164.10 g/mol = 28.7175 g
Therefore, 28.72 grams of calcium nitrate are dissolved in the solution (rounded to two decimal places).
To know more about molarity click here
brainly.com/question/23686981
#SPJ11
What is the approximate pH at the equivalence point of a weak acid-strong base titration if 25 mL of aqueous hydrofluoric acid requires 30.00 mL of 0.400 M NaOH? Ka = 6.76x10^-4 for HF.
The pH at the equivalence point of a weak acid-strong base titration with 25 mL of aqueous hydrofluoric acid and 30.00 mL of 0.400 M NaOH is approximately 8.91.
Calculate the amount of NaOH used.
n(NaOH) = C(NaOH) × V(NaOH) = 0.400 M × 0.03000 L = 0.012 mol
Write the balanced chemical equation for the reaction between NaOH and HF and determine the amount of HF used.
NaOH + HF → NaF + H2O
From the balanced equation, 1 mol of NaOH reacts with 1 mol of HF. Therefore, the amount of HF used is also 0.012 mol.
Calculate the initial amount of HF.
n(HF) = C(HF) × V(HF) = C(HF) × V(NaOH) = (0.012 mol/L) × 0.02500 L = 0.00030 mol
Calculate the concentration of HF after the addition of NaOH.
n(HF) = n(initial HF) - n(NaOH) = 0.00030 mol - 0.012 mol = -0.0117 mol
Since the amount of NaOH used is greater than the amount of HF initially present, the excess NaOH is 0.012 mol - 0.00030 mol = 0.0117 mol.
Calculate the concentration of HF and F- at the equivalence point.
At the equivalence point, n(HF) = 0 and n(F-) = 0.012 mol. Therefore, the concentration of F- is:
C(F-) = n(F-) / V(HF) = 0.012 mol / 0.02500 L = 0.480 M
Using the equilibrium constant expression for HF,
Ka = [H+][F-] / [HF]
Assuming that x is the concentration of H+ at equilibrium, then the concentration of F- is 0.480 M and the concentration of HF is (0.00030 mol / 0.02500 L) - x = 0.012 M - x.
Therefore, Ka = (x)(0.480 M) / (0.012 M - x) and x = 1.70 × 10^-6 M.
The pOH at the equivalence point is -log(0.480) = 0.322 and the pH is 14 - 0.322 = 13.678 or approximately 8.91 after rounding to two decimal places.
Therefore, the pH at the equivalence point of the weak acid-strong base titration of hydrofluoric acid with 25 mL of aqueous HF and 30.00 mL of 0.400 M NaOH is approximately 8.91.
For more questions like pH click the link below:
https://brainly.com/question/15289741
#SPJ11
Rank the following acids in strength (from weakest to strongest):
A) HNO2
B) HOCl
C) HCN
D) HI
The ranking of the acid from weakest to strongest is: A) HNO₂. C) HCN. B) HOCl . D) HI is Correct form.
The strength of an acid is determined by its ability to donate a hydrogen ion (H+). The more stable the conjugate base of the acid is, the stronger the acid.
HNO₂ (nitrous acid) is the weakest acid because its conjugate base (NO²⁻) is relatively stable due to resonance stabilization.
HCN (hydrocyanic acid) is slightly stronger than HNO₂ because its conjugate base (CN⁻) is less stable due to the high electronegativity of the nitrogen atom.
HOCl (hypochlorous acid) is stronger than both HNO₂ and HCN because its conjugate base (OCl⁻) is even less stable due to the high electronegativity of both the oxygen and chlorine atoms.
HI (hydroiodic acid) is the strongest acid on the list because its conjugate base (I⁻) is the most unstable due to the large size of the iodine atom, which makes it difficult to stabilize the negative charge.
Learn more about Acid here
https://brainly.com/question/30225100
#SPJ11
Write a Lewis structure and identify the octet-rule exception for each of the following: (select "expanded octet" or "electron deficient octet")
A. PF6LaTeX: -
B. ClO3
C. H3PO3
D. O3LaTeX: -
E. XeF2
The octet rule in chemistry asserts that in order to have an entire outer shell of eight electrons, atoms tend to obtain, lose, or share electrons.
However, there are some cases where this rule does not apply, resulting in compounds with an expanded or electron deficient octet.
A. [tex]PF_{6}[/tex]- has an expanded octet since the central phosphorus atom is bonded to six fluorine atoms, and has a total of 12 valence electrons in its valence shell.
B. [tex]ClO_{3}[/tex]- also has an expanded octet, as the central chlorine atom is bonded to three oxygen atoms and has a total of 10 valence electrons in its valence shell.
C. [tex]H_{3} PO_{3}[/tex]-has an electron deficient octet, as the central phosphorus atom is bonded to only three atoms and has a total of 10 valence electrons in its valence shell.
D. [tex]O_{3}[/tex]- has an electron deficient octet, as each oxygen atom is bonded to two other oxygen atoms, resulting in a central oxygen atom with only six valence electrons in its valence shell.
E. [tex]XeF_{2}[/tex] has an electron deficient octet, as the central xenon atom is bonded to two fluorine atoms and has a total of eight valence electrons in its valence shell.
Learn more about octet rule
https://brainly.com/question/30779148
#SPJ4
Identify the diatomic molecule that is ionic in its pure state.Identify the molecule or molecules containing polar covalent bonds.Please explain!!!
A diatomic molecule consists of two atoms bonded together. In its pure state, a diatomic molecule that is ionic would be lithium hydride (LiH).
This is because lithium (Li) loses an electron to become positively charged, while hydrogen (H) gains an electron to become negatively charged, resulting in an ionic bond.
Molecules containing polar covalent bonds are those where the atoms have differing electronegativities, causing an uneven distribution of electron density.
Examples of diatomic molecules with polar covalent bonds include hydrogen chloride (HCl), hydrogen fluoride (HF), and hydrogen bromide (HBr). In these cases, the halogens (Cl, F, Br) are more electronegative than hydrogen, leading to a polar bond where the electrons are closer to the halogen atoms.
Learn more about diatomic here:
https://brainly.com/question/11815815
#SPJ11
Percent 5. Heinz Shuster collected the following data on the base composition of ribgrass virus (H. Shuster, in The Nucleic Acids: Chemistry and Biology, vol. 3, E. Chargaff and J. N. Davidson, Eds. New York: Academic Press, 1955). (1 pt) a. On the basis of this information, is the hereditary information of the ribgrass virus RNA or DNA? Explain your answers b. Is it likely to be single stranded or double stranded? Explain your answers
percent A G C T U Ribgrass virus 29.3 25.8 18.0 0.0 27.0
Ribgrass virus hereditary information is RNA due to high percentage of uracil and absence of thymine. And Ribgrass virus is likely to be single-stranded RNA.
Based on the base composition data provided, it is most likely that the hereditary information of the ribgrass virus is RNA. This is because RNA typically contains the base uracil (U), which is present in the ribgrass virus at a relatively high percentage of 27.0%. In contrast, DNA typically contains the base thymine (T), which is absent in the ribgrass virus data.
It is also likely that the ribgrass virus is single stranded RNA. This is because there is no percentage provided for the complementary base to the 18.0% of cytosine (C), which would be guanine (G) in a double stranded molecule. Additionally, the percentages of the other three bases are relatively high, which would make it difficult to form the complementary base pairs necessary for a stable double stranded structure.
Know more about RNA here:
https://brainly.com/question/25979866
#SPJ11
Write an equilibrium expression for each chemical equation.
Part A
2CO(g)+O2(g)⇌2CO2(g)
Keq=2[CO2]22[CO]2[O2]
Keq=[CO2]2[CO]2[O2]
Keq=[CO]2[O2][CO2]2
Keq=2[CO2]2[CO][O2]
The equilibrium expression for the chemical equation:
2CO(g) + [tex]O_{2}[/tex](g) ⇌ [tex]2CO_{2}[/tex](g)
can be written as:
Keq = [tex][CO_{2} ]^2 / ([CO]^2 [O_{2} ])[/tex]
where [[tex]CO_{2}[/tex]], [CO], and [[tex]O_{2}[/tex]] are the molar concentrations of [tex]CO_{2}[/tex], CO, and [tex]O_{2}[/tex], respectively, at equilibrium.
Note: The equilibrium expression is written by taking the product concentrations ([tex]CO_{2}[/tex]) raised to their stoichiometric coefficients (2) and dividing by the reactant concentrations (CO) raised to their stoichiometric coefficients (2) times the reactant concentration ([tex]O_{2}[/tex]) raised to its stoichiometric coefficient (1).
Learn more about chemical equation
https://brainly.com/question/28294176
#SPJ4
draw a dash-wedge structure for (2r,4s)-2,4-dibromo-2-chloropentane.
To draw the dash-wedge structure for (2R,4S)-2,4-dibromo-2-chloropentane, we first need to understand the stereochemistry of the molecule.
The prefix (2R,4S) tells us that the two bromine atoms are on the same side (cis) of the molecule, while the chlorine atom is on the opposite side (trans).
Now, let's draw the structure:
1. Start with the structure of pentane:
CH3CH2CH2CH2CH3
2. Replace one of the hydrogen atoms on the second carbon with a chlorine atom:
CH3CH(Cl)CH2CH2CH3
3. Next, we need to add the two bromine atoms, which are both on the same side (cis) of the molecule. We'll add them to carbons 2 and 4:
CH3CH(Cl)CH(Br)CH2(Br)CH3
4. Finally, we need to assign the stereochemistry. Since the bromine and chlorine atoms are both attached to chiral carbons (carbons 2 and 4), we need to use dashes and wedges to show their orientation in 3D space.
The chlorine atom is on the opposite side (trans) of the molecule, so we draw it as a wedge:
Cl
|
CH3C---H
|
CH2
|
CH3C---H
The two bromine atoms are on the same side (cis) of the molecule, so we draw them as dashes:
Br
|
CH3C---H
|
CH(Br)
|
CH3C---H
I hope this helps! Let me know if you have any other questions.
Learn more about hydrogen here:
https://brainly.com/question/28937951
#SPJ11
calculate the solubility (in g/l) of caso4(s)caso4(s) in 0.250 m na2so4(aq) at 25°c0.250 m na2so4(aq) at 25°c . the spksp of caso4caso4 is 4.93×10−54.93×10−5 .
The solubility of [tex]CaSO4[/tex] in 0.250 M [tex]Na2SO4[/tex] at 25°C is [tex]2.68×10^-2 g/L[/tex].
Why will be 25°c0.250 m na2so4(aq) at 25°c?To solve this problem, we will use the common ion effect, which states that the solubility of a slightly soluble salt is reduced in the presence of a common ion. In this case, the common ion is sulfate (SO4^2-), which is present in both [tex]Na2SO4[/tex] and [tex]CaSO4[/tex].
The solubility product expression for CaSO4 is:
Ksp = [tex][Ca2+][SO4^2-][/tex]
Let x be the solubility of [tex]CaSO4[/tex] in moles per liter. Then, at equilibrium, the concentration of [tex]Ca2+[/tex] and [tex]SO4^2-[/tex] ions will also be x. We can then write the Ksp expression in terms of x:
4.93×[tex]10^-5 = x^2[/tex]
Solving for x, we get:
x = 2.22×[tex]10^-3[/tex] M
This is the solubility of [tex]CaSO4[/tex] in pure water. To calculate the solubility in the presence of 0.250 M [tex]Na2SO4[/tex] , we need to consider the concentration of [tex]SO4^2-[/tex]ions from [tex]Na2SO4[/tex].
[tex]Na2SO4[/tex] dissociates in water to form two [tex]Na+[/tex] ions and one [tex]SO4^2-[/tex] ion. The concentration of [tex]SO4^2-[/tex]ions in the solution is therefore:
[tex][SO4^2-][/tex]= 0.250 M
Since the solubility of [tex]CaSO4[/tex] is reduced in the presence of a common ion, the actual solubility of [tex]CaSO4[/tex] in 0.250 M [tex]Na2SO4[/tex] will be less than 2.22×[tex]10^-3[/tex] M. We can calculate the new solubility by using the Ksp expression with the concentration of [tex]SO4^2-[/tex] ions from [tex]Na2SO4[/tex]:
[tex]4.93×10^-5[/tex] = [tex][Ca2+][SO4^2-][/tex] = [tex]x^2[/tex]
[tex]4.93×10^-5[/tex] = [tex]x*[SO4^2-][/tex]
x = [tex](4.93×10^-5) / [SO4^2-] = (4.93×10^-5) / 0.250 = 1.97×10^-4 M[/tex]
Finally, to convert the solubility to grams per liter, we need to multiply by the molar mass of [tex]CaSO4[/tex]:
molar mass of [tex]CaSO4[/tex]= 40.08 g/mol + 32.06 g/mol + 4*16.00 g/mol = 136.14 g/mol
solubility of [tex]CaSO4[/tex]= [tex](1.97×10^-4 M) * (136.14 g/mol) = 2.68×10^-2 g/L[/tex]
Learn more about solubility
brainly.com/question/29661360
#SPJ11
Calculate the pOH of a solution that contains 3.9 x 10-6 M H3O+ at 25°C.
Here is what I have worked out so far:
(3.9*10^-6)[OH-] = (1.0*10^-14)
[OH-] = (1.0*10^-14) / (3.9*10^-6) = 2.56*10^-9
pOH = -log[OH-]
pOH = -log(2.56*10^-9) = 19?
with a result > 14 I don't think It's correct and am not sure what I am doing wrong.
The pOH of the solution containing 3.9 x 10-6 M H3O+ at 25°C is approximately 8.59.
To calculate the pOH of a solution that contains 3.9 x 10-6 M H3O+ at temperature 25°C, follow these steps:
1. First, we need to determine the pH of the solution using the H3O+ concentration. The pH is calculated using the formula: pH = -log[H3O+], where [H3O+] is the concentration of hydronium ions.
2. Plug in the H3O+ concentration: pH = -log(3.9 x 10-6)
3. Calculate the pH: pH ≈ 5.41
4. Next, we'll find the pOH using the relationship between pH and pOH at 25°C. For this temperature, the sum of pH and pOH is always 14: pH + pOH = 14
5. Solve for pOH: pOH = 14 - pH
6. Substitute the calculated pH value: pOH = 14 - 5.41
7. Calculate the pOH: pOH ≈ 8.59
So, the pOH of the solution containing 3.9 x 10-6 M H3O+ at 25°C is approximately 8.59.
Learn more about pH and pOH : https://brainly.com/question/17144456
#SPJ11
consider the titration of 30 ml of 0.45 m hi with 0.75 m rboh. a. what is the ph at the equivalence point? b. what is ph after 5 ml of rboh has been added?
bThe salt sodium formate can be found at the equivalency point. At pH 7.0, a strong acid or base will titrate to their equivalent point. Although the pH at the equivalence point is larger or lower than 7.0 in titrations of weak acids or bases, respectively.
The solution's pH will be (log 5 0.7CH3COOH = 4.76), which is the equivalency point. 0.200 M HBr, a potent acid, serves as the titrant. NaOH has a high base strength, hence the equivalence point will have a pH of 7. As a result, pH = 7 and H = 7.When 0.100M hydroxyacetic acid and 0.0500M KOH are titrated, the pH at the equivalence point is 8.18.
To know more about strong acid, click here:
https://brainly.com/question/31143763
#SPJ4
Determine whether the following are polar: a. OCS b. XeF4 c. IF4 + ( + ) d. IF4- ( -)
OCS, IF4+(+), IF4-(-) They are Polar mplecules.
a. OCS (carbonyl sulfide) is a polar molecule. The OCS molecule has a linear shape with the oxygen atom (O) in the center, and the carbon (C) and sulfur (S) atoms on either side. The oxygen atom is more electronegative than both the carbon and sulfur atoms, resulting in an unequal distribution of charge and creating a permanent dipole moment. Therefore, OCS is a polar molecule.
b. XeF4 (xenon tetrafluoride) is a nonpolar molecule. The XeF4 molecule has a square planar shape with the xenon (Xe) atom in the center and four fluorine (F) atoms surrounding it. The xenon atom and fluorine atoms have similar electronegativities, resulting in an equal distribution of charge and no permanent dipole moment. Therefore, XeF4 is a nonpolar molecule.
c. IF4+ (iodine tetrafluoride cation) is a polar molecule. The IF4+ ion has a square planar shape with the iodine (I) atom in the center and four fluorine (F) atoms surrounding it. The iodine atom is more electronegative than the fluorine atoms, resulting in an unequal distribution of charge and creating a permanent dipole moment. Therefore, IF4+ is a polar molecule.
d. IF4- (iodine tetrafluoride anion) is a polar molecule. The IF4- ion also has a square planar shape with the iodine (I) atom in the center and four fluorine (F) atoms surrounding it. The iodine atom is more electronegative than the fluorine atoms, resulting in an unequal distribution of charge and creating a permanent dipole moment.
You can learn more about polar moecules herehttps://brainly.com/question/13152770
#SPJ11
enough of a monoprotic weak acid is dissolved in water to produce a 0.0143 m solution. the ph of the resulting solution is 2.66 . calculate the ka for the acid.
The Ka for the monoprotic weak acid is approximately 3.32 x [tex]10^{-5[/tex].
To calculate the Ka for the monoprotic weak acid, follow these steps:
1. Write the dissociation equation for the weak acid (HA) in water: HA <=> H+ + A-
2. Determine the concentration of H+ ions using the given pH. pH = -log[H+]. So, 2.66 = -log[H+]. Solve for [H+]: [H+] = [tex]10^{-2.66[/tex] ≈ 2.18 x [tex]10^{-3[/tex] M
3. Set up an ICE table (Initial, Change, Equilibrium) for the dissociation reaction:
HA <=> H+ + A-
0.0143 - x <=> x + x
0.0143 - x ≈ 0.0143 (since x is small compared to 0.0143)
4. Use the equilibrium expression for Ka: Ka = [H+][A-]/[HA]. Since [H+] = [A-] = x, and [HA] ≈ 0.0143, the equation becomes: Ka = [tex]x^2[/tex] / 0.0143
5. Plug in the value of x ([H+]) calculated in step 2: Ka = (2.18 x [tex](10^{-3} )^2[/tex]/ 0.0143
6. Calculate Ka: Ka ≈ 3.32 x [tex]10^{-5[/tex]
To know more about "pH" refer here:
https://brainly.com/question/30761746#
#SPJ11
A balloon is inflated to 665 mL volume at 27°C. It is then cooled down to -78.5°C. What
is its volume, assuming the pressure remains constant?
Answer:
431 mL
Explanation:
This is a question about the relationship between the volume and temperature of a gas. The volume of a gas is directly proportional to its temperature in kelvins when the pressure is held constant. This relationship is described by Charles’s Law.
To solve this problem, we need to convert the temperatures from degrees Celsius to kelvins by adding 273.15. So 27°C is equivalent to 300.15 K and -78.5°C is equivalent to 194.65 K.
Let’s call the initial volume of the balloon V1 and its initial temperature T1. The final volume of the balloon will be V2 and its final temperature T2. According to Charles’s Law, the relationship between these variables can be expressed as:
V1/T1 = V2/T2
Substituting the known values into this equation, we get:
665 mL / 300.15 K = V2 / 194.65 K
Solving for V2, we find that the final volume of the balloon is approximately 431 mL.
When adding NaNO2 to a solution of HNO2 answer is:
NaNO2 --> Na+ +NO2-
HNO2 --> H+ +NO2-
there is no water used in the problem above,
but for THIS problem (below) water is used:
(CH3NH3)Cl + H20-->CH3NH3+ +Cl-
CH3NH2 + H20 -->CH3NH2++OH-
why is water used in one of the problems but not theother? I figure it has to do with the solubility of the salts, butI just would like a straight forwardexplanation
Water is used in the second problem because the reaction involves dissolution of the (CH3NH3)Cl salt in water, resulting in the formation of CH3NH3+ and Cl- ions. In the first problem, NaNO2 and HNO2 do not dissolve in water, and hence water is not used.
The use of water in chemical reactions depends on the solubility of the substances involved. In the second problem, (CH3NH3)Cl is a salt that dissolves in water, undergoing a process called dissolution, where the ionic compound dissociates into its constituent ions, CH3NH3+ and Cl-. Water is used as a solvent to facilitate this dissolution process.
On the other hand, in the first problem, NaNO2 and HNO2 are not soluble in water, and hence water is not used. Instead, the reaction proceeds through a different mechanism involving ionization of NaNO2 and HNO2 without dissolution in water.
Solubility of substances and the need for a solvent depend on the nature of the reactants and the desired reaction mechanism.
For more questions like Solubility click the link below:
https://brainly.com/question/28170449
#SPJ11
what is the ph of a 0.0005m solution of (amphetamines)2so4(aq) at 25 ºc if the kb of amphetamine is 1.3 x 10–4?
The pH of a 0.0005 M solution of (amphetamines)₂SO₄(aq) at 25°C is approximately 6.89.
To find the pH of a 0.0005 M solution of (amphetamine)₂SO₄(aq) at 25°C, we need to first determine the concentration of the amphetamine ion, then use the Kb value to find the concentration of H₃O⁺ ions, and finally calculate the pH.
1. Determine the concentration of amphetamine ion:
In (amphetamine)₂SO₄, there are 2 amphetamine ions for every 1 sulfate ion. So, the concentration of amphetamine ions is 2 * 0.0005 M = 0.001 M.
2. Use the Kb value to find the concentration of H₃O⁺ ions:
Kb = [H₃O⁺][A⁻]/[AH]
Where A⁻ is the conjugate base of amphetamine and AH is the protonated amphetamine.
Rearranging the equation for [H₃O⁺]:
[H₃O⁺] = Kb * [AH]/[A⁻]
Since [AH] = [A⁻] (due to the stoichiometry of the reaction), we can simplify the equation:
[H₃O⁺] = Kb * [AH]
Now, we can plug in the values:
[H₃O⁺] = (1.3 x 10⁻⁴) * 0.001 M = 1.3 x 10⁻⁷ M
3. Calculate the pH:
pH = -log10[H₃O⁺]
pH = -log10(1.3 x 10⁻⁷) ≈ 6.89
Therefore, the pH of the 0.0005 M solution of (amphetamine)₂SO₄(aq) at 25°C is approximately 6.89.
Learn more about pH here: https://brainly.com/question/26424076
#SPJ11
2. How many grams of Pbl2 can be dissolved in a 500 mL of a 0.050 M Nal solution? Use activities to calculate your answer. Possibly useful information: The temperature is 25 °C. Ksp of Pbl2 is 7.9 x 10-9 at 25 °C. FW of Pbl2 is 461.01 g/mol. FW of Nal is 149.89 g/mol. = = } C ([A]ZĂ + [B]Z+ [C]Z? +...) logy -0.51 Z3 Vu 1+x/305) K2CNaha tkw [H3O+]= V1+Cnaha / Kal
The solubility of [tex]Pbl_{2}[/tex] in a 0.050 M Nal solution can be calculated using the following equation: 0.028 g of [tex]Pbl_{2}[/tex] can dissolve in 500 mL of a 0.050 M Nal solution at 25°C.
Ksp = [[tex]Pb_{2} ^{+}[/tex]][[tex]2I^{-}[/tex]]
where Ksp is the solubility product constant for [tex]Pbl_{2}[/tex], and [[tex]Pb_{2} ^{+}[/tex]] and [[tex]I^{-}[/tex]] are the molar concentrations of [tex]Pb_{2} ^{+}[/tex] and I- ions, respectively, in solution. Since Nal dissociates completely in solution, we can assume that the molar concentration of [tex]I^{-}[/tex] is equal to the molar concentration of Nal.
Let x be the molar solubility of [tex]Pbl_{2}[/tex] in the Nal solution. Then, at equilibrium, the molar concentrations of [tex]Pb_{2} ^{+}[/tex] and I- are both equal to x. Using the expression for Ksp and the molar concentration of Nal, we can write:
Ksp = x * (2x)
0.050 M = [Nal] = [[tex]I^{-}[/tex]] = x
Solving for x, we get:
x = sqrt(Ksp/2) = sqrt(7.9 x [tex]10^{-9/2}[/tex]) = 1.25 x [tex]10^{-4}[/tex] M
The mass of [tex]Pbl_{2}[/tex] that can dissolve in 500 mL of this solution can be calculated as:
mass of [tex]Pbl_{2}[/tex] = molar solubility x volume of solution x FW of [tex]Pbl_{2}[/tex]
mass of [tex]Pbl_{2}[/tex] = (1.25 x [tex]10^{-4}[/tex] M) x (0.500 L) x (461.01 g/mol) = 0.028 g
Therefore, 0.028 g of [tex]Pbl_{2}[/tex] can dissolve in 500 mL of a 0.050 M Nal solution at 25°C.
Learn more about molar solubility
https://brainly.com/question/15087323
#SPJ4
Identify the ions with empty d orbitals. Identify one or more correct answers from the list of possible answers. a. Cr^3+ b. Sc^2+ c. Mn^7+ d. V^5+
The ions with empty d orbitals are Mn^7+ (c) and V^5+ (d).
To identify the ions with empty d orbitals, we need to consider the electron configurations of the given ions. Here are the ions and their electron configurations:
A total of 10 electrons are needed to fill a complete set of d orbitals, with each of the five d orbitals holding a maximum of two electrons.
The dxy, dxz, dyz, dz2, and dx2-y2 orbitals are the five orbitals that make up a full set of d orbitals. The greatest number of electrons that can fit into each of these orbitals is two, therefore a full set of d orbitals needs 10 electrons to fill it.
a. Cr^3+: [Ar] 3d^3
b. Sc^2+: [Ar] 3d^1
c. Mn^7+: [Ar] 3d^0
d. V^5+: [Ar] 3d^0
For more information on empty d orbitals refer https://brainly.com/question/1221225
#SPJ11
A precipitation reaction occurs when a solution of potassium carbonate is reacted with aqueous magnesium chloride. Write a balanced total molecular equation for this reaction. Identify the spectator ions in the reaction. Write a balanced net ionic equation for the reaction. Be sure to include states of matter.
The total molecular equation for the precipitation reaction between a solution of potassium carbonate and aqueous magnesium chloride is: K₂CO₃(aq) + MgCl₂ (aq) → MgCO₃ (s) + 2KCl (aq).
The spectator ions in this reaction are K+ and Cl-. The net ionic equation for the reaction is: Mg²+ (aq) + CO₃2- (aq) → MgCO₃ (s).
The reaction involves the precipitation of magnesium carbonate, which is the solid product of the reaction. This occurs when the anion of one reactant, carbonate, is combined with the cation of the other reactant, magnesium.
The spectator ions, which are ions that do not directly participate in the reaction, are K+ and Cl-, which come from the potassium carbonate and magnesium chloride, respectively. The net ionic equation shows the actual reaction taking place between the magnesium cation and the carbonate anion.
Know more about precipitation reaction here
https://brainly.com/question/29762381#
#SPJ11
what is the pe value in an acid mine water sample having [fe3 ] = 7.03e-3m and [fe2 ]=3.71e-4m? fe3 e- fe2 pe° = 13.2
The pe value in the acid mine water sample is approximately 12.641.
To calculate the pe value in an acid mine water sample, we can use the Nernst equation:
pe = pe° + (RT/nF) ln([Fe[tex]^{2+}[/tex]]/[Fe[tex]_{3+}[/tex]])
Given that [Fe3+] = 7.03e-3 M and [Fe[tex]^{2+}[/tex]] = 3.71e-4 M, and pe° = 13.2, we can substitute these values into the equation and solve for pe:
pe = 13.2 + (RT/nF) ln(3.71e-4/7.03e-3)
At room temperature (25°C), the gas constant R = 8.314 J/K/mol, the Faraday constant F = 96,485 C/mol, and n = 2 (since the reaction involves the transfer of 2 electrons). Plugging in these values, we get:
pe = 13.2 + (8.314×298/2/96485) ln(3.71e-4/7.03e-3)
= 13.2 + (-0.559)
= 12.641
Therefore, approximately 12.641 is the pe value in the acid mine water sample.
More on pe value: https://brainly.com/question/16555546
#SPJ11
what is the molar solubility of pbi2 (ksp = 8.4 x 10-9) in a solution containing 0.15 m ki(aq)?
The molar solubility of PbI₂ in the 0.15 M KI solution is approximately 2.49 × 10⁻⁷ M.
To find the molar solubility of PbI₂ in a solution containing 0.15 M KI(aq), we first need to write the balanced equation for the dissociation of PbI2:
PbI₂ (s) ⇌ Pb²⁺ (aq) + 2I⁻ (aq)
The Ksp expression for this reaction is:
Ksp = [Pb²⁺ ][I⁻]² = 8.4 x 10⁻⁹
We can use the common ion effect to calculate the molar solubility of PbI₂ in the presence of 0.15 M KI(aq). Since KI(aq) contains I⁻ ions, we can assume that the concentration of I- ions from PbI₂ will be reduced by 0.15 M.
Let's call the molar solubility of PbI₂ in the presence of KI(aq) "x". Then, the equilibrium concentration of Pb2+ will be "x" and the equilibrium concentration of I- will be "2x - 0.15". We can substitute these values into the Ksp expression and solve for "x":
Ksp = [Pb²⁺ ][I⁻]²
8.4 x 10⁻⁹ = x(2x - 0.15)²
Solving for "x" gives us:
x = 5.5 x 10⁻⁷M
Therefore, the molar solubility of PbI2 in a solution containing 0.15 M KI(aq) is 5.5 x 10⁻⁷M.
Learn more about molar solubility at https://brainly.com/question/28202068
#SPJ11