Answer:
18000J or 18kJ
Explanation:
Use the formula:
work done or energy = power × time
power = 60Wtime = 5 mins = 300s (5 × 60)Sub in the values:
work done or energy = 60 × 300 = 18000Answer = 18000J or 18kJHope this helps!
If the wind is blowing from north to south, where are the areas of high and low pressure?
Answer:
Wind is caused by differences in the atmospheric pressure. When a difference in atmospheric pressure exists, air moves from the higher to the lower pressure area, resulting in winds of various speeds.
Our Earth is a rotating planet. Fast moving air is deflected by the Coriolis effect, except exactly on the equator. This defines the direction of cyclones, hurricanes, and typhoons rotation. The wind flow around a large cyclone is counterclockwise in the Northern Hemisphere and clockwise in the Southern Hemisphere.
Wind forms when the sun heats one part of the atmosphere differently than another part. This causes expansion of warmer air, making less pressure where it is warm than where it is cooler. Air always moves from high pressure to lower pressure, and this movement of air is wind.
The high is west of you, and the low is east of you. (If you're in the northern Hemisphere.)
Why should anybody care about sexual harassment?
Answer:
Explanation:
People should care about sexual harassment for many reasons. such as, sexual harassment is a very serious and touchy topic. Sexual harassment should not be tolerated and can ruin many peoples mental health.
Why do larger stars life a shortter life?
Answer:
A star's life expectancy depends on its mass. Generally, the more massive the star, the faster it burns up its fuel supply, and the shorter its life. ... A star with a mass like the Sun, on the other hand, can continue fusing hydrogen for about 10 billion years.
What do you think causes the rising and sinking of molten rock in the mantle?
Answer:
Heyyy hope this helps
Convection currents describe the rising, spread, and sinking of gas, liquid, or molten material caused by the application of heat.
A murder has been committed and you are a juror at the trial. The prosecuting attorney has presented evidence that the victim put up a struggle and injured her assailant, drawing blood, prior to her demise. Blood typing was completed and the blood type matches the defendant's blood type. The prosecuting attorney states that this evidence is proof that the defendant is guilty of murder. As a juror, do you think the defendant is guilty of murder based on this evidence? Why or why not? If not, what other evidence do you think is needed?
The fact that the blood type matches that of the defendant is no proof that the defendant is guilty as charged.
There are about four blood types that people can have, these blood types are; A, B, AB and O. Everybody must posses one of these blood types. A person's blood type is determined through laboratory tests.
The prosecuting attorney was wrong in concluding that the defendant is guilty as charged only based on the blood type evidence. different people could have the same blood type. Only DNA analysis can conclusively prove that the defendant is actually guilty as charged.
Learn more: https://brainly.com/question/1527403
Max ran 100 feet in 10 seconds.
Molly ran 60 feet in 5 seconds.
1. Who ran farther, Max or Molly?
2. Who ran faster? Explain.
Answer:
for max :
100 feet in 10 secs
for molly :
60 feet in 5 secs = 120 feet in 10 secs
so, molly ran farther in the same time interval i.e. covered 120 feet where as Max covered 100 feet
Explanation:
brainliest plz
Answer:
1 no Max
2 no Molly
Explanation:
because if molly can run 60 feet in 5 second he can run 120 feet in 10 second
Define periodic motion
Q 1.1 Verify full system functionality.
Q 1.2 Document findings, and actions.
Q 1.3 Test the theory to determine the cause of the problem.
Q 1.4 Identify the problem.
Q 1.5 Establish a theory of the cause.
Answer:
Q11. verifying full system functionality confirms that you have solved the original problem and ensures that you have not created another problem while repairing the computer.
A concave mirror of focal length 10cm forms an inverted image of 40cm from the mirror and 4cm high. Determine the position and size of the object by scale drawing and by calculation
The equation of the constructor of the geomeric optics allows to find the results for the distance and size of the objects are:
Distance from the mirror to the object is: p = 13.3 cm The height of the object is: h = 1.33 cm
The equation of the constructor of geometric optics describes the position of objects and their images for mirrors and lenses.
[tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]
Where f is the focal length, p and q are the distances to the object and the image, respectively.
They indicate the focal length f = 10 cm, the distance to the image q = 40 cm, that the height s h ’= 4 cm. In the attachment we see a scheme of the system.
Let's find the distance to the object.
[tex]\frac{1}{p\frac{x}{y} } = \frac{1}{f} - \frac{1}{q} \\\frac{1}{p} = \frac{1}{10} - \frac{1}{40}\\\frac{1}{p} = 0.075[/tex]
p = 13.3 cm
The magnification in the ratio of image size to object size. The image is inverted so its height is negative.
[tex]m = \frac{h'}{h} = - \frac{q}{p}\\h = - \frac{p}{q} \ h'\\h = - \frac{13.3}{40}\ (-4)[/tex]
h = 1.33 cm
In conclusion using the equation of the constructor we can find the results for the distance and size of the objects are:
Distance from the mirror to the object is 13.3 cm The height of the object is 1.33 cm
Learn more here: brainly.com/question/14314471
How can you return a negatively or positively charged object back to its neutral state?
[tex]\huge\fbox\orange{A} \huge\fbox\red{N}\huge\fbox\blue{S}\huge\fbox\green{W}\huge\fbox\gray{E}\huge\fbox\purple{R}[/tex]
[tex]\huge\underline\mathtt\colorbox{cyan}{For Positively Charged:}[/tex]
By gaining electrons from the ground, the object will have a balance of charge and therefore be neutral. Grounding is the grounding of a positively charged object and involves the transfer of electrons from the ground into the object.
[tex]\huge\underline\mathtt\colorbox{red}{For Negatively Charged:}[/tex]
If it is to have its charge removed, then it will have to lose its excess electrons. Once the excess electrons are removed from the object, there will be equal numbers of protons and electrons within the object and it will have a balance of charge.
if the electron affinity for an element is a negative number, does it mean that the anion of the element is more stable than the neutral atom?
No, the anion of the element is more stable than the neutral atom but an electron in an atom or ion is lower in energy than a free electron.
We know that,
Kinetic energy is defined as the energy of the object that occurs due to the motion of the object. The total work needed by the body to starts accelerating it by the help of given mass which is supplied from the rest position and its mentioned velocity.
The energy body gets due to the process of acceleration by this the body will able to main the kinetic energy of the body without changing the speed of the body.
The energy which has been stored in the body or any object by the help of the particular position or the proper arrangement of the parts is known as potential energy.
There will be no effect of the outside environment on the potential energy that present inside the body.
The kinetic energy decrease or increase with change into the velocity.
Therefore, No, the anion of the element is more stable than the neutral atom but an electron in an atom or ion is lower in energy than a free electron.
Learn more about kinetic energy here:
brainly.com/question/12669551
#SPJ12
write answers with significant figures:
a) 17.35 g +8.498 g
Answer:
25.9 g
Explanation:
= 17.35
8.498
________+
= 25.848 g = 25.85 g = 25.9 g
*so sorry if wrong
In your own words, explain why elements
such as gold and silver are so rare to be
found in our Universe or within the Earth?
NEED HELP!!! IF YOU ANSWER ALL QUESTIONS I WILL GIVE YOU BRAINEST!!!!! 15 POINTS!!!!
1. Alana wants to add some eccentric exercise to her routine. She has heard that pull ups are good, but she does not have a lot of upper body strength and thinks that is going to be too challenging. She wonders if she can start by just hanging on at the top with her chin above the bar and holding that pose to get the benefits. What is the BEST response to Alana?
A.
Any activity that works the arms is eccentric exercise.
B.
That might build strength, but it is not eccentric exercise.
C.
She will get all of the benefits because grasping the bar key.
D.
She needs to do something else as pull-ups are not eccentric exercise.
2. Trina has a family history of thyroid issues, and it has caused many of her family members to gain weight, which is a common side effect. She is worried that she may develop thyroid problems one day but does not think that exercise will help since it is a gland, not a muscle. She thinks that this means that it cannot be targeted and strengthened. What is the BEST response to Trina?
A.
Isometric exercises strengthen the thyroid gland.
B.
If a condition runs in her family, she will get it no matter what.
C.
There is very little that she can do to improve the health of her thyroid.
D.
It cannot be specifically targeted, but exercise will help it function better.
3. Amari has been exercising regularly and she is really starting to feel the benefits. Overall, she has more energy and just feels better about herself. She has started volunteering for things that she otherwise would have been too shy to do. Could this newfound confidence be a result of her good habits?
A.
Yes, she looks better, so she feels better.
B.
Yes, she is producing more testosterone.
C.
No, she has probably just matured a little.
D.
No, exercise does not have psychological effects.
PLEASE NO LINKS
Answer:
1.A
2 .B
3 A
Explanation:
1.A eccentric excercises works the arms
2.B- if a condition runs in her family there are possibilities that she'll get it because it runs in the genes of her family
write the importance of international Bureu of weights and Measures in the country.
Answer:
International Bureau of Weights and Measures (BIPM), French Bureau International des Poids et Mesures, international organization founded to bring about the unification of measurement systems, to establish and preserve fundamental international standards and prototypes, to verify national standards, and to determine fundamental physical constants. The bureau was established by a convention signed in Paris on May 20, 1875, effective January 1876. In 1921 a modified convention was signed.
A 89 kg object is suspended from 2 cables, with an angle of 120 degrees between them. What is the
tension on each cable? (Assume each cable is at an equal angle above the horizontal) Answer in
Newtons.
→ The tension on the cable is 890 N.
The free body diagram is drawed below. Applying the second law of newton:
(you have to transpose the T forces to the 'y' axis). After that:
[tex]\Large \text {$2Tcos(60) = 89 \times 10$}[/tex]
89 x 10 is the Weight Gravitational force (Mass times gravity). Therefore:
[tex]\Large \text {$T = 890$ N}[/tex]
→ See more on:
https://brainly.com/question/19534327
A truck of mass 10000kg moving through a sloppy road of length 20km with the help of 5000N force. If the truck climbs the vertical height of 200m and it's efficiency is 80% calculate the additional mass that can be carried by the truck ?
Answer:
30000
Explanation:
Statement of the given problem,
A truck of mass 10000 kg is moving through a sloppy road of length 20 km with the help of 5000 N force. If the truck climb the vertical height of 200 m and its efficiency is 80% calculate the additional mass that can be carried by the truck?
Let M denotes the additional mass (in kg) that can be carried by the truck.
From above data we determine that,
P.E. gained by total mass at the vertical height of 200 m = 80% of work done by the applied force [road elevation = tan^-1 (200/20000) = 0.57° (assumed negligible)]
Hence we get following relation,
(10000 + M)*g*200 = 5000*20*1000*80/100 [g = gravitational acceleration]
or 10000 + M = 50000*8/g = 50000*8/10 [g = 10 m/s^2 (assumed)]
or M = 40000 - 10000 = 30000 (kg) [Ans]
An unknown mass is on a flat frictionless surface and a 2 kg object is attached to it with a string going over pulleyt mounted to the end of the table. Acceleration of the 2 kg object is 1.8 m/s^2. What is the mass of the object?
Answer:
Explanation:
F=ma
F in this case is the gravity acting on the 2kg object. Acceleration of gravity is 9.8 m/s^2. SF=ma, so
F = 2kg*(9.8 m/s^2) = 19.6 N
Now use this force to determine the mass of the object on the table:
F=ma
19.6 N (1N=kg*m/s^2) = m*(1.8 m/s^2)
m = 10.89 kg
45 KG object has a momentum of 225 KG•m/s northward what is the objects velocity
Answer:
The answer is 5.0 m/s
Explanation:
(Hope this helps can I pls have brainlist (crown)☺️)
if you enter a room where there is a rotten egg how can you tell
Answer:
You would smell it.
If you increase the elasticity of a material, what happens to the speed of a mechanical wave going through it?
Answer:
At the molecular level, materials are held together by bonds, which act like springs for small displacements from the equilibrium spacing between neighboring atoms. Push the atoms close, the bond pushes back to keep them apart. Pull them apart, the bond pulls the atoms closer. For those small displacements, it acts like a spring
The speed of the wave will be related to the stiffness of of those springs - you compress the material - how quickly do all of those little springs rebound and push their neighboring atoms away, sending that wave of compression through the material.
Explanation:
What force does the gravitational attraction of earth exert on a 12.8kg object, such as a toolbox loaded with tools
Answer:
16
Explanation:
abebe wants to lift a 10N object from the ground. what is the minimum force he needs to exert
Explanation:
object has a mass, but force, newton is Unit of force.
If the value of g is taken as 10, the mass of the object here is only 1 kg. You will need a force of 10N to lift 1kg mass against the gravity ...
A 130 N horizontal force keeps a 30 kg chair moving at a constant velocity. Find the coefficient of kinetic friction between the chair and the floor.
The coefficient of kinetic friction between the chair and the floor is 0.44.
Given the following data:
Horizontal force = 130 NMass of chair = 30 kgWe know that the acceleration due to gravity (g) of an object on planet Earth is equal to 9.8 [tex]m/s^2[/tex]
To find coefficient of kinetic friction between the chair and the floor:
Mathematically, the coefficient of kinetic friction between two objects is given by the formula;
[tex]u = \frac{F_k}{mg}\\\\u = \frac{130}{30[9.8]}\\\\u = \frac{130}{294}[/tex]
Coefficient of kinetic friction, u = 0.44.
Read more: https://brainly.com/question/13754413
In order for work to be done, what three things are necessary?
Answer:
force, displacement & cause.
Explanation:
there must be a displacement and the force must cause the displacement.
i hope this helps you ahh
1. Two balloons are charged with an identical quantity and type of charge: -6.25C. They are held apart at a separation distance of 0.67m. Determine the magnitude of the electrical force of repulsion between them. I
Answer:
The electric force between them is 878.9 N
Given:
Identical charge C
Separation between two charges m
For finding the electrical force,
According to the coulomb's law
Here, force between two balloons are repulsive because both charges are same.
Where N Therefore, the electric force between them is 878.
Explanation:
Suppose you have a pendulum clock that keeps correct time on Earth (acceleration due to
gravity = 9.8 m/s
2
). Without changing the clock, you take it to the Moon (acceleration due to
gravity = 1.6 m/s
2
). For every hour interval (on Earth) the Moon clock will record
How long would it take for a person to sprint from the 0m line to the 100m line if they are traveling forward at 6m/s?
Answer:
This section assumes you have enough background in calculus to be familiar with integration. In Instantaneous Velocity and Speed and Average and Instantaneous Acceleration we introduced the kinematic functions of velocity and acceleration using the derivative. By taking the derivative of the position function we found the velocity function, and likewise by taking the derivative of the velocity function we found the acceleration function. Using integral calculus, we can work backward and calculate the velocity function from the acceleration function, and the position function from the velocity function.Explanation:
Derive the kinematic equations for constant acceleration using integral calculus.Use the integral formulation of the kinematic equations in analyzing motion.Find the functional form of velocity versus time given the acceleration function.Find the functional form of position versus time given the velocity function.If the activity of a source is 70 Bq after 2 years, and 35 Bq after 15 years. How long will be until the activity is 8.75 Bq?
Answer:
The SI unit for activity is one decay per second and is given the name becquerel (Bq) in honor of the discoverer of radioactivity. That is, 1 Bq = 1 decay/s. Activity R is often expressed in other units, such as decays per minute or decays per year.
Wirte Different Methods of Transmission of heat?
Answer:;
Explanation:
the energy released by a nuclear fusion reaction is produced when
Answer:
atoms combine
Explanation: