how to determine tensile stress in two square bars wlded together

The first partial derivatives of the function W = sin(alpha)cos(beta) are:
∂W/∂α = cos(alpha)cos(beta)
∂W/∂β = -sin(alpha)sin(beta)

To find the first partial derivatives of the function W = sin(alpha)cos(beta), we'll calculate the partial derivative with respect to alpha and the partial derivative with respect to beta.

1. Partial derivative with respect to alpha:
∂W/∂α = ∂(sin(alpha)cos(beta))/∂α
To find this partial derivative, we treat beta as a constant and differentiate the function with respect to alpha. Using the chain rule, we have:
∂W/∂α = cos(alpha)cos(beta)

2. Partial derivative with respect to beta:
∂W/∂β = ∂(sin(alpha)cos(beta))/∂β
To find this partial derivative, we treat alpha as a constant and differentiate the function with respect to beta. Using the chain rule, we have:
∂W/∂β = -sin(alpha)sin(beta)

To learn more about Partial Derivative : https://brainly.com/question/2293382

#SPJ11

the de Broglie wavelength of the baseball is approximately 1.05 x 10^-34 meters.

The de Broglie wavelength of an object is given by the equation λ = h/mv, where h is Planck's constant (6.626 x 10^-34 J s), m is the mass of the object, and v is its velocity. Plugging in the given values for the baseball, we get:
λ = (6.626 x 10^-34 J s)/(211 g x 0.0310 m/s)
λ = 9.74 x 10^-35 m
Therefore, the de Broglie wavelength of the baseball is approximately 9.74 x 10^-35 meters.
Hi! To calculate the de Broglie wavelength of a 211 g baseball moving at 31.0 m/s, you'll need to use the de Broglie wavelength formula:
λ = h / (mv)
where λ represents the de Broglie wavelength, h is the Planck's constant (6.626 x 10^-34 Js), m is the mass of the object (211 g converted to kg), and v is its velocity (31.0 m/s).
First, convert the mass to kg: 211 g * (1 kg / 1000 g) = 0.211 kg
Now, plug the values into the formula:
λ = (6.626 x 10^-34 Js) / (0.211 kg * 31.0 m/s)
λ ≈ 1.05 x 10^-34 m

Learn more about wavelength  here:

https://brainly.com/question/31143857

#SPJ11

In activity 1-1, the direction of the incident ray will be determined by the position of the laser and the glass rod. The laser will emit a beam of light that will be spread out vertically by the glass rod.

This beam will then enter the chamber at a certain angle, which will determine the direction of the incident ray. The incident ray is the path taken by the beam of light as it enters the chamber and interacts with the surfaces inside. The angle at which the beam enters the chamber will determine how it interacts with the surfaces and how it is reflected or refracted. Therefore, the position of the laser and the glass rod will determine the direction of the incident ray in activity 1-1.

Learn more about glass rod here:

https://brainly.com/question/1833730

#SPJ11

The dose in a thin LiF dosimeter struck by a fluence of 3*10^11 e/cm^2 with t0=20 MeV is 0.00796 Gy.
To determine the dose (Gy) in a thin LiF dosimeter struck by a fluence of 3*10^11 e/cm² with an initial energy (T0) of 20 MeV, you would need to know the energy deposition per unit mass (in J/kg or Gray) and the mass of the dosimeter.

Here's a brief explanation of the terms:

- Dose: It is the energy absorbed per unit mass, measured in Gray (Gy). In this context, it refers to the energy absorbed by the dosimeter from the fluence of particles.

- Dosimeter: A device that measures the absorbed dose of ionizing radiation. In your case, it's a thin LiF dosimeter.

- Fluence: The number of particles (such as electrons) incident on a specific area per unit area, measured in particles/cm². In your example, it is 3*10^11 e/cm².

To find the dose (Gy), you would need more information about the energy deposition per unit mass and the mass of the dosimeter.

To calculate the dose in a thin lif dosimeter struck by a fluence of 3*10^11 e/cm^2 with t0=20 mev, we need to use the following formula:

Dose (Gy) = Fluence (electrons/cm^2) * Conversion Factor * Energy Deposition Coefficient

The conversion factor for electrons in the air is 0.876 Gy/electron/cm^2, and the energy deposition coefficient for lithium fluoride (LiF) is 1.21 eV/electron. Therefore:

Dose (Gy) = 3*10^11 e/cm^2 * 0.876 Gy/electron/cm^2 * (20 MeV * 1.6*10^-19 J/electron) / (1.21 eV/electron * 1000 J/Gy)

Simplifying the units, we get:

Dose (Gy) = 3*10^11 * 0.876 * 20 * 1.6*10^-19 / 1.21 / 1000
Dose (Gy) = 0.00796 Gy

learn more about energy deposition here: brainly.com/question/2003548

#SPJ11

The response D is correct as hot water has more energy than cold water, causing the molecules to move faster, leading to faster dissolution.

Hot water dissolves substances faster than cold water due to its higher energy level. The heat energy causes the water molecules to move faster, which increases the kinetic energy of the particles in the substance being dissolved. This therefore raises the probability of particle collisions, which accelerates the rate of disintegration.

Additionally, the stronger intermolecular forces between the water molecules make it easier for the solute particles to dissolve due to their increased energy level. This is why substances dissolution occurs faster in hot water than cold water.

To know more about solubility, visit,

https://brainly.com/question/23946616

#SPJ1

Complete question - Zeplin is investigating how long different substances take to dissolve in water. He timed how long each tested substance took to dissolve twice: once in cold water, and once in hot water. He noticed they dissolved faster in the hot water for every test. Which statement explains why this happened?

Responses:

A Hot water has more volume than cold water, so substances spread to fill space.

B Hot water has more gravity than cold water, so particles break up more quickly.

C Hot water has more oxygen than cold water, and oxygen absorbs substances.

D Hot water has more energy than cold water, causing the molecules to move faster.

The resulting graph should show a downward slope from the peak to the energy level of the products, indicating the release of energy during the exothermic reaction.

To draw the reaction profile of an exothermic reaction, follow these steps:

Draw a horizontal line to represent the energy of the reactants.

Draw a peak at the transition state to show the energy required to reach the activated complex.

Draw a downward slope to represent the release of energy during the reaction.

Draw a horizontal line at the energy level of the products.

Label the axes of the graph with energy on the y-axis and the reaction coordinate (or progress of the reaction) on the x-axis.

Learn more about exothermic reaction:https://brainly.com/question/10373907

#SPJ1

Refer to the attached image.

For the Moon to maintain its elliptical orbit around the Earth, a centripetal acceleration of around  [tex]0.027 m/s^2[/tex].

The Moon's orbital radius around the Earth is approximately 384,400 km, or or [tex]3.844 \times 10^8[/tex] meters.

The following equation may be used to determine the Moon's orbital velocity:

V = 2πR / T

where T denotes the Moon's orbital period around the Earth.

The Moon orbits the Earth at a period of around 27.3 days, or [tex]2.36 \times 10^6[/tex] seconds.

When we solve for V by substituting the values of R and T into the equation, we obtain:

[tex]V = 2\pi (3.844 \times 10^8 m) / (2.36 \times 10^6 s) = 1022.7 m/s[/tex]

When we solve for V by substituting the values of R and T into the equation, we obtain:

[tex]ac = (1022.7 m/s)^2 / (3.844 \times 10^8 m) = 0.027 m/s^2[/tex]

Centripetal acceleration is always perpendicular to the object's motion and is aimed at the circle's centre. This indicates that it modifies the object's direction rather than its speed. The formula provides the magnitude of the centripetal acceleration  [tex]a = v^2 / r[/tex], where r is the circumference of the circular route and v is the object's speed.

Since it governs the motion of many items in our daily lives, centripetal acceleration is a crucial idea in physics. Centripetal acceleration, for instance, is responsible for the rotation of a car's tyres while cornering as well as the motion of planets in their orbits around the sun. Centripetal acceleration is not present, instead of moving in a curved route, these things would move in a straight line.

To learn more about Centripetal acceleration visit here:

brainly.com/question/14465119

#SPJ4

The mass moment of inertia of the racket about the y-axis through O is approximately 0.000473 kg m

To calculate the mass moment of inertia of the racket about the y-axis through O, we can divide the racket into several small elements and use the parallel axis theorem to add up their individual moments of inertia.

Let's consider a small element of length ΔL at a distance y from the y-axis. The mass of this element is:

Δm = r ΔL

The moment of inertia of this element about the y-axis through its center of mass is:

ΔI = [tex](Δm y^2)/3[/tex]

Using the parallel axis theorem, the moment of inertia of this element about the y-axis through O is:

ΔI' = ΔI + Δm ([tex]d-y)^2[/tex]

where d is the distance from the center of mass of the element to point O.

Substituting the expressions for ΔI and Δm, we get:

ΔI' = (r ΔL[tex]y^2)/3 + r ΔL (d-y)^2[/tex]

The total mass moment of inertia of the racket about the y-axis through O is the sum of the moments of inertia of all the small elements:

I = ∑ ΔI' = ∑ [(r ΔL y[tex]^2)/3 + r ΔL (d-y)^2][/tex]

We can approximate the shape of the racket by dividing it into small rectangles of width Δx and length L. The height of each rectangle can be calculated using the given dimensions of the racket. Let's call the height of a rectangle at a distance y from the y-axis h(y).

We can express h(y) as a function of y using the equation of the curve that defines the shape of the racket. The curve can be approximated by a parabola:

h(y) = [tex]ay^2 + by[/tex]

where a and b are constants that can be determined from the given dimensions of the racket. At y = 0, h(y) = 0. Therefore, b = 0. At y = 0.15 m, h(y) = 0.025 m. Substituting these values, we get:

0.025 = [tex]a (0.15)^2[/tex]

Solving for a, we get:

a = 0.037

Therefore, the height of a rectangle at a distance y from the y-axis is:

h(y) = 0.037 [tex]y^2[/tex]

The distance d can be approximated as the distance from the center of a rectangle to point O. Since the rectangles are uniform, the center of mass of each rectangle is at its midpoint. Therefore, d is half the length of the rectangle:

d = L/2

Substituting the expressions for h(y), d, and ΔL, we can express the total mass moment of inertia of the racket as an integral:

I = [tex]∫ [(r h(y) Δx y^2)/3 + r h(y) Δx (L/2-y)^2] dy[/tex]

The limits of integration are from -0.075 m to 0.075 m, since the width of the racket is 0.15 m.

Substituting the expressions for h(y) and d, and simplifying the integrand, we get:

[tex]I = (r Δx L^3)/36 ∫ y^2 + (L/2-y)^2 dy\\I = (r Δx L^3)/18 ∫ (y-L/4)^2 dy\\I = (r Δx L^5)/480[/tex]

Substituting the given values of r and L, we get:

I = 0.000473 kg m[tex]^2[/tex]

Therefore, the mass moment of inertia of the racket about the y-axis through O is approximately 0.000473 kg m

To know more about accelerating here

https://brainly.com/question/460763

#SPJ4

The probability that z is less than -1.54 or greater than 1.89 is 0.1824, or approximately 18.24%.

Using a standard normal distribution table, we can find the probabilities as follows:

P(z < -1.54) = 0.0618

P(z > 1.89) = 0.0294

To find the probability that z is less than -1.54 or greater than 1.89, we add the two probabilities and subtract the overlap:

P(z < -1.54 or z > 1.89) = P(z < -1.54) + P(z > 1.89) - P(-1.54 < z < 1.89)

P(z < -1.54 or z > 1.89) = 0.0618 + 0.0294 - P(-1.54 < z < 1.89)

To find the overlap probability, we can use the complement rule and subtract the probability of z being outside the range from 1:

P(-1.54 < z < 1.89) = 1 - P(z < -1.54 or z > 1.89)

P(-1.54 < z < 1.89) = 1 - (0.0618 + 0.0294)

P(-1.54 < z < 1.89) = 0.9088

Substituting this into the previous equation, we get:

P(z < -1.54 or z > 1.89) = 0.0618 + 0.0294 - 0.9088

P(z < -1.54 or z > 1.89) = 0.1824

The standard normal distribution, also known as the Gaussian distribution, is a probability distribution that is commonly used in physics to describe the behavior of random variables. It is a continuous probability distribution with a bell-shaped curve that is symmetric around the mean. The mean of the distribution is zero, and the standard deviation is one.

The standard normal distribution is particularly useful in physics because it is mathematically tractable and can be used to model a wide variety of physical phenomena. For example, it can be used to describe the distribution of velocities of gas molecules in a gas or the distribution of errors in a measurement experiment. In addition, many physical processes follow the normal distribution or can be approximated by it using the central limit theorem.

To learn more about Standard normal distribution visit here:

brainly.com/question/29509087

#SPJ4

Race as a socio-historical construct, highlights the importance of understanding the social, political, and economic contexts in which race is created and maintained.

According to Michael Omi and Howard Winant, in "Racial Formations," race is a socio-historical concept that is constructed through the intersection of cultural, political, and economic forces.

In this book, they argue that race is not an immutable, biologically determined characteristic of individuals or groups but rather a social construct that is created and maintained through systems of power and inequality. The authors illustrate how race is constructed through examples from different historical periods and social contexts.

Learn more about race here: https://brainly.com/question/28138343

#SPJ1

a. The magnitude of the impulse acting on the golf ball can be found using the formula I = FΔt, where I is the impulse, F is the force, and Δt is the time interval. Plugging in the values given, we get I = (4800 N)(0.003 s) = 14.4 N·s.

b. The change in the golf ball's momentum can be found using the formula Δp = mvf - mvi, where Δp is the change in momentum, m is the mass of the golf ball, vf is the final velocity, and vi is the initial velocity. Since the problem doesn't give any information about the velocities, we can assume that the golf ball is initially at rest (vi = 0).

Therefore, Δp = mvf.

We can find vf using the formula vf = at, where a is the acceleration and t is the time interval.

The acceleration can be found using the formula a = F/m, where F is the force and m is the mass of the golf ball. Plugging in the values given, we get a = (4800 N)/(0.045 kg) = 106667 m/s^2. Plugging this into the formula for vf, we get vf = (106667 m/s^2)(0.003 s) = 320 m/s. Finally, plugging this into the formula for Δp, we get Δp = (0.045 kg)(320 m/s) = 14.4 kg·m/s.

Therefore, the change in the golf ball's momentum is 14.4 kg·m/s.

a. To find the magnitude of the impulse acting on the golf ball, we can use the formula:

Impulse = Average force × Time interval

Impulse = 4800 N × 0.003 s = 14.4 Ns

So, the magnitude of the impulse acting on the golf ball is 14.4 Ns.

b. The change in the golf ball's momentum is equal to the impulse applied.

Therefore, the change in the golf ball's momentum is also 14.4 Ns.

learn more about momentum here: brainly.com/question/22257327

#SPJ11

This is the differential equation describing the center of mass position of the spring x(t) for an aging undamped spring with a varying spring constant m([tex]\frac{d^{2}x }{dt^{2} }[/tex]  ) = -k0e(-αt)x(t) + mg .

To find the differential equation describing the center of mass position of the spring x(t), we need to use Newton's second law, which states that the net force acting on an object is equal to its mass times its acceleration. In this case, the object is the spring, and its mass is given by m.
The force acting on the spring is the sum of the forces due to the spring's deformation and its gravitational force. The force due to the spring's deformation is proportional to the displacement of the spring from its equilibrium position, and is given by F = -kx(t), where k is the spring constant at time t. The gravitational force is given by Fg = mg, where g is the acceleration due to gravity.
Therefore, the net force acting on the spring is given by:
Fnet = -kx(t) + mg
Using Newton's second law, we can write:
m([tex]\frac{d^{2}x }{dt^{2} }[/tex]) = -kx(t) + mg
Substituting the expression for k(t) given in the question, we get:
m([tex]\frac{d^{2}x }{dt^{2} }[/tex]²) = -k0e(-αt)x(t) + mg.

Learn more about Newton's second law here

https://brainly.com/question/13447525

#SPJ11

The ratio of the energies stored in the combination, before and after the introduction of the dielectric slab is (5/3) times the dielectric constant 'K'.

Before the introduction of the dielectric slab, the energy stored in the combination of capacitors can be calculated using the formula:

E = (1/2) * C1 * V^2 + (1/2) * C2 * V^2

Substituting C1 = 2C2, we get:

E = (1/2) * 2C2 * V^2 + (1/2) * C2 * V^2

E = (3/2) * C2 * V^2

After the introduction of the dielectric slab, the capacitance of each capacitor increases by a factor of K. Therefore, the new capacitances are C1' = 2KC2 and C2' = KC2.

The energy stored in the combination of capacitors with the dielectric slab can be calculated using the same formula:

E' = (1/2) * C1' * V^2 + (1/2) * C2' * V^2

Substituting the new capacitance values, we get:

E' = (1/2) * 2KC2 * V^2 + (1/2) * KC2 * V^2

E' = (5/2) * KC2 * V^2

Taking the ratio of the energies, we get:

E'/E = [(5/2) * KC2 * V^2]/[(3/2) * C2 * V^2]

E'/E = (5/3) * K

Also, to find the ratio of the energies stored in the combination of capacitors before and after the introduction of the dielectric slab, follow these steps:

1. Find the initial total capacitance (C_total_initial) when the capacitors are connected in parallel:
C_total_initial = C1 + C2

2. Calculate the initial energy stored (U_initial) in the combination of capacitors:
U_initial = (1/2) * C_total_initial * V^2

3. When the dielectric slab is inserted, the capacitance of each capacitor increases by a factor of 'K'. So, the new capacitances are:
C1_new = K * C1
C2_new = K * C2

4. Calculate the new total capacitance (C_total_new) when the dielectric slab is inserted:
C_total_new = C1_new + C2_new

5. Calculate the new energy stored (U_new) in the combination of capacitors after inserting the dielectric slab:
U_new = (1/2) * C_total_new * V^2

6. Finally, find the ratio of the energies stored before and after the introduction of the dielectric slab:
Energy_ratio = U_new / U_initial

By following these steps, you can find the ratio of the energies stored in the combination of capacitors before and after the introduction of the dielectric slab.

Learn more about dielectric slab here: brainly.com/question/12915112

#SPJ11

The magnetic field inside a solenoid is a magnetic field that is generated by a coil of wire with multiple closely spaced loops, through which an electric current flows. The magnetic field inside a solenoid is typically strong and uniform along the axis of the solenoid, and it is directed along the same axis in the form of concentric circles around the inside of the coil. The strength of the magnetic field inside a solenoid depends on various factors such as the number of turns in the coil, the current flowing through the coil, and the dimensions of the solenoid. Solenoids are commonly used in electromagnets, motors, and other devices that require a controlled magnetic field for their operation.

The formula to calculate the magnetic field inside a solenoid is:
B = (μ₀ * n * I) / L
Here, B is the magnetic field, μ₀ is the permeability of free space (constant value), n is the number of turns per unit length (turns/cm), I is current, and L is the length of the solenoid.

We can rearrange this formula to solve for n:
n = (B * L) / (μ₀ * I)

Putting in the values given in the question, we get:
n = (0.25 T * 50 cm) / (4π * 10^-7 T m/A * 20 A)
n = 5,000 turns/cm

Since we want the total number of turns, we need to multiply by the length of the solenoid in cm:
n_total = 5,000 turns/cm * 50 cm
n_total = 250,000 turns

Therefore, the answer is b. 5,000 turns.

Know more about the magnetic field:

https://brainly.com/question/14411049

#SPJ11

According to the given question, a force of 8 N is applied at an angle of 150 degrees with respect to the displacement of a 12 kg box. This means that the force is not being applied in the same direction as the displacement of the box.

In order to calculate the work done, we need to first determine the component of the force in the direction of the displacement. To do this, we can use trigonometry to find the cosine of the angle between the force vector and the displacement vector.

Once we have this value, we can multiply it by the magnitude of the force and the distance traveled to get the work done. It is important to note that work is a scalar quantity and is measured in joules.

Therefore, the final answer will be in joules. In this case, the work done will be less than if the force was applied in the same direction as the displacement.

To know more about displacement refer here:

https://brainly.com/question/11934397#

#SPJ11

The inside of the sun is hotter than the surface of the sun.

The sun's core, where nuclear fusion occurs, has a temperature of approximately 15 million degrees Celsius, while the surface, known as the photosphere, is around 5,500 degrees Celsius. The significant difference in temperature is due to the energy generation process at the core, which involves the fusion of hydrogen atoms to form helium. This process releases a tremendous amount of heat and light, causing the core to be significantly hotter than the surface.

As we move outwards from the core, the temperature decreases gradually through the radiative and convective zones. The radiative zone is where energy moves through radiation, while the convective zone involves the movement of heat through convection currents. The cooler, less dense plasma rises to the photosphere and then sinks back down as it cools, creating a continuous cycle.

In summary, the inside of the sun is hotter than its surface due to the nuclear fusion process occurring at the core. The temperature decreases as we move outward from the core through the radiative and convective zones, eventually reaching the surface, which is cooler and denser in comparison.

know more about nuclear fusion here:

https://brainly.com/question/982293

#SPJ11

The passband gain for the given first-order circuit is 5, and the cutoff frequency is 15,000 rad/s.

To find the passband gain and cutoff frequency of the voltage transfer function T(s) = 5s/(s + 15,000), follow these steps:

1. Passband gain: In a first-order circuit, the passband gain is simply the coefficient of 's' in the numerator, which is 5 in this case.
2. Cutoff frequency: The cutoff frequency is the value of 's' when the denominator is equal to the numerator. In this case, set 5s = s + 15,000, which gives s = 15,000 rad/s as the cutoff frequency.

To plot the Bode gain response using MATLAB, use the following code:

```MATLAB
numerator = [5 0];
denominator = [1 15000];
sys = tff(numerator, denominator);
bode(sys);
```


This code creates a transfer function object 'sys' with the given numerator and denominator coefficients, then uses the 'bode()' function to plot the Bode gain response.

To know more about passband gain click on below link:

https://brainly.com/question/31424377#

#SPJ11

The turbine from rest to 180 rad/s in 27 s

The inlet, gas turbine engine, which consists of a compressor, combustion chamber, and turbine, and exhaust nozzle are the individual parts of a turbojet engine. Through the inlet, air is taken into the engine, where it is heated and compressed by the compressor.

τ_avg = ΔL / Δt

where ΔL is the change in angular momentum, which can be calculated using:

ΔL = Iω - I(0)

where I(0) is the initial moment of inertia, which we can assume to be zero.

Substituting the given values, we get:

ΔL = Iω = (1/2)Iω² = (1/2) * (180 rad/s)² * I

τ_avg = ΔL / Δt = (1/2) * (180 rad/s)² * I / 27 s

To know more about turbine visit:-

https://brainly.com/question/14582343

#SPJ1

The smallest value of T for loose rocks on the asteroid's equator to fly off is about 2.2 hours.

To find the smallest value of T for loose rocks on the asteroid's equator to fly off, we need to consider the centrifugal force acting on the rocks due to the rotation of the asteroid. The centrifugal force is given by:

F = m * ω^2 * r

where m is the mass of the rock, ω is the angular velocity of the asteroid, and r is the distance from the center of the asteroid to the rock (which is equal to the radius of the asteroid, r = 18 km).

At the equator of the asteroid, the centrifugal force is balanced by the gravitational force, so we have:

F = m * ω^2 * r = m * g

where g is the acceleration due to gravity on the surface of the asteroid, which we found in part (a): g = 1.66 x 10^-3 m/s^2.

Solving for ω, we get:

ω = sqrt(g/r)

The rotational period T is related to the angular velocity by:

ω = 2π/T

So we can write:

T = 2π/ω = 2π/sqrt(g/r)

Substituting the values, we get:

T = 2π/sqrt(1.66 x 10^-3 m/s^2 * 18,000 m) ≈ 2.2 hours

Therefore, the smallest value of T for loose rocks on the asteroid's equator to fly off is about 2.2 hours.

Learn more about asteroid's equator

brainly.com/question/19161842

#SPJ11

The permeability of free space (4pi10^-7 N/A^2) and the limits of integration are from x = -0.009 m to x = 0.009 m, since the midpoint of the unshielded section is at x = 0.

It has magnitude at a point P that is radially separated from the wire by r. B = μ0I/(2πr). This equation is derived from Ampere's law, one of Maxwell's equations. The permeability of open space is defined as the ratio 0 = 4*10-7 N/A2. Ns/(Cm) = Tesla is the magnetic field's SI unit (T).

To find the expression for the magnitude of the differential magnetic field, dB, at point 4 due to the current in the wire segment dl, we can use the Biot-Savart law.

Let r be the distance from the wire segment dl to point 4

dB = (mu_0/4*pi) * (I * dl * sin(theta)) / r²

where mu_0 is the permeability of free space (4pi10⁻⁷ N/A²).

(b): To perform the indefinite integral of the expression we found in part (a), we need to integrate over the entire unshielded length of the wire, which is x = 0.018 meters long. We have:

B = ∫dB = ∫(mu_0/4*pi) * (I * dl * sin(theta)) / r²

To know more about permeability visit:-

https://brainly.com/question/29857641

#SPJ1

Question:

Arabbit has eaten the foil shielding off of a power cable that carries a DC current of I= 0.41At0 the amplifier for your outdoor speaker system The shielded parts of the wire do not contribute to the magnetic field outside the wire. The unshielded part of the wire is x = 0.018 meters long; Point 4 is exactly above the midpoint of the unshielded section; distance x/2 above the wire The current flows to the right as shown; which should be taken a5 the positive direction: The small length of wire, dl, a distance from the midpoint of the unshielded section of the wire, contributes a differential magnetic field dB, at point 4

The mass of the box is 11.8 kg.

We can use Newton's second law, which states that the net force on an object is equal to its mass times its acceleration:

F_net = ma

In this case, the fisherman applies a horizontal force to the box, and the box accelerates in the same direction. Since there is no friction, the net force on the box is equal to the force applied by the fisherman:

F_net = 42.5 N

The acceleration of the box is given as 3.60 [tex]m/s^2[/tex]. We can now solve for the mass of the box by rearranging the formula:

m = F_net / a

Substituting the given values, we get:

m = 42.5 N / 3.60[tex]m/s^2[/tex]

m = 11.8 kg

Therefore, the mass of the box is 11.8 kg.

Learn more about mass

brainly.com/question/19694949

#SPJ11

To determine the net force acting on the system of particles at t = 2.0 s, we need to differentiate the momentum function with respect to time:

d p/dt = m(dv/dt)

where p is momentum, m is the total mass of the system, and v is velocity.

Differentiating the given momentum function, we get:

d p/dt = 0.71 + 2.4t

At t = 2.0 s, we can substitute t into the above equation to find the rate of change of momentum at that instant:

d p/dt = 0.71 + 2.4(2.0) = 4.31 kg ·m/s

Since force is defined as the rate of change of momentum, we can calculate the net force acting on the system at t = 2.0 s as:

F = d p/dt = 4.31 kg ·m/s

Therefore, the net force acting on the system of particles at t = 2.0 s is 4.31 kg ·m/s.

To know more about net force :

https://brainly.com/question/29261584

#SPJ11

the value of the inductance L is 1.8 * 10^-4 H (henries).

To find the value of the inductance L, we can use the formula:

Vrms = Ipk * sqrt(2) * w * L

Where Vrms is the rms voltage (9.0 V), Ipk is the peak current (60 mA), sqrt(2) is a constant factor, w is the angular frequency (2 * pi * f), and f is the frequency (20 kHz).

Plugging in the values, we get:

9.0 = 60 * 10^-3 * sqrt(2) * 2 * pi * 20 * 10^3 * L

Simplifying, we get:

L = 9.0 / (60 * 10^-3 * sqrt(2) * 2 * pi * 20 * 10^3) = 1.8 * 10^-4 H
Here you can learn more about inductance

https://brainly.com/question/18575018#

#SPJ11  

The x-component of the electric field at (x=0,y=0,z=0) at t=0 cannot be determined without additional information.

In order to determine the x-component of the electric field at (x=0,y=0,z=0) at t=0, we would need more information about the electromagnetic wave.

The electric and magnetic fields are perpendicular to each other and both are perpendicular to the direction of wave propagation.

Therefore, we would need to know the direction of propagation in order to determine the orientation of the electric and magnetic fields.

Without this information, it is impossible to determine the x-component of the electric field at a specific point in space and time.

For more such questions on electric field, click on:

https://brainly.com/question/14372859

#SPJ11

The linear speed of a point on the tip of the rotor can be calculated by the product of distance and angular speed. Therefore, the linear speed of a point on the tip of the rotor is 37.5 m/s.

Angular momentum is a physical quantity that describes an object's amount of rotational motion. It is a vector quantity that is determined by the object's moment of inertia (a measure of its resistance to rotational motion) and angular velocity (the rate at which the object rotates around an axis). Angular momentum is defined mathematically as the cross-product of an object's moment of inertia and angular velocity. When no external torque applies on a closed system, angular momentum is conserved, which is known as the law of conservation of angular momentum. Angular momentum is crucial in many branches of physics, including mechanics, quantum mechanics, and astronomy.

To learn more about angular momentum

https://brainly.com/question/15460796

The linear speed of a point on the tip of the rotor can be calculated by the product of distance and angular speed. Therefore, the linear speed of a point on the tip of the rotor is 37.5 m/s.

Angular momentum is a physical quantity that describes an object's amount of rotational motion. It is a vector quantity that is determined by the object's moment of inertia (a measure of its resistance to rotational motion) and angular velocity (the rate at which the object rotates around an axis). Angular momentum is defined mathematically as the cross-product of an object's moment of inertia and angular velocity. When no external torque applies on a closed system, angular momentum is conserved, which is known as the law of conservation of angular momentum. Angular momentum is crucial in many branches of physics, including mechanics, quantum mechanics, and astronomy.

To learn more about angular momentum

https://brainly.com/question/15460796

a) To solve the problem for n = 5, we can start by turning off light 5. Then, we turn off light 4 by turning on light 5 (since it was the only light on) and then turning off light 4. We repeat this process for lights 3 and 2, until all the lights are off. Therefore, it takes 4 moves to turn all the lights off for n = 5.

b) To find the number of moves required to turn all n lights off for any n, we can use a recurrence relation. Let M(n) be the number of moves required to turn off n lights.

If we consider the last light, light n, it can only be turned off if all the preceding lights (1 through n-1) are off. This means that we need to turn off all n-1 lights before we can turn off light n.

Once we turn off all n-1 lights, we can turn off light n with one move. Therefore, the total number of moves required to turn off all n lights is M(n-1) + 1.

Using this recurrence relation, we can find the number of moves required for any value of n. For example, for n = 5, we can calculate:

M(5) = M(4) + 1
M(4) = M(3) + 1
M(3) = M(2) + 1
M(2) = M(1) + 1
M(1) = 1

Substituting these values, we get:

M(2) = 2
M(3) = 3
M(4) = 4
M(5) = 5

Therefore, the number of moves required to turn off all 5 lights is 5, which matches the answer we found earlier.

In general, the recurrence relation for the number of moves required to turn off n lights is:

M(n) = M(n-1) + 1, with initial condition M(1) = 1.

Visit https://brainly.com/question/31478312 to know more about recurrence

#SPJ11

The acceleration due to gravity on the planet Htrae is twice the acceleration due to gravity on Earth. Since g(Earth) is approximately 9.8 m/s^2, we have:
g(Htrae) = 2 * 9.8 m/s^2 = 19.6 m/s^2

So the answer is D. 20 m/s^2 (rounded to one significant figure).

The weight of an object is given by the formula:

W = m * g,

where W is weight, m is mass, and g is acceleration due to gravity.

Let's use the given information to solve for the acceleration due to gravity on Htrae. We know that:

Weight on Earth = 450 N
Weight on Htrae = 900 N

We also know that the mass of the object is the same on both planets. Therefore, we can set up the following equation:

m * g(Htrae) = 900 N

Solving for g(Htrae), we get:

g(Htrae) = 900 N / m

To find the value of m, we need to use the weight on Earth. We know that:

W(Earth) = m * g(Earth) = 450 N

Solving for m, we get:

m = 450 N / g(Earth)

Substituting this value of m into the equation for g(Htrae), we get:

g(Htrae) = 900 N / (450 N / g(Earth)) = 2 * g(Earth)

Therefore, the acceleration due to gravity on the planet Htrae is twice the acceleration due to gravity on Earth. Since g(Earth) is approximately 9.8 m/s^2, we have:

g(Htrae) = 2 * 9.8 m/s^2 = 19.6 m/s^2

So the answer is D. 20 m/s^2 (rounded to one significant figure).

Visit to know more about Acceleration:-

brainly.com/question/25876659

#SPJ11

If a 38.0-turn, 5.70-cm-long solenoid generates a magnetic field with a magnitude of 2.20 mt at its center, the current in the solenoid is 0.726 A.

The magnetic field of a solenoid is calculated as follows:

B = μ₀ * n * I,

The answer to the question is that L = 5.70 cm, B = 2.20 m, and T = 2.20 T, N, and turns equal 38.0. As a result, after plugging these values into the formula above, we get:

4.20 x T*m/A * (38.0 / 0.0570 m) * 2.20 x T

With the data above, we can now determine the current as follows:

I = (2.20 x T) / [(4 x T*m/A) * (38.0 / 0.0570 m)] = 0.726 A

As a result, 0.726 A of current is flowing through the solenoid.

A solenoid is made out of a large coil of wire with several turns. When a current passes through it, it creates an almost homogeneous internal magnetic field. Because they can convert electrical current into mechanical action, solenoids are widely used as switches.

To learn more about solenoid visit:

brainly.com/question/3821492

#SPJ1