How would you prepare a 35 ml solution of 95% (volume/volume solution of ethanol?

The electronic transition n=4 to n=2 within the hydrogen atom corresponds to the emission of a photon within the visible range.

The electronic transitions in hydrogen atoms involve the movement of an electron from one energy level (n) to another. The energy of the emitted photon is given by the difference in energy between the initial and final energy levels.

In this case, the transition n=4 to n=2 corresponds to an electron moving from the fourth energy level to the second energy level. This transition results in the emission of a photon. The energy of the emitted photon is equal to the energy difference between these two levels.

The energy of a photon is directly related to its wavelength. Photons with higher energy have shorter wavelengths, and photons with lower energy have longer wavelengths. The visible range of light is characterized by photons with wavelengths between approximately 400 to 700 nanometers.

Since the n=4 to n=2 transition corresponds to the emission of a photon, and the visible range falls within this energy range, the correct statement is that a photon within the visible range will be emitted during this electronic transition.

Learn more about electronic transition here:

https://brainly.com/question/12950701

#SPJ11

Answer:

H2+CO2=H2O+CO

Kp=(pCO)(pH2O)/(pH2)(pCO2)

= 11×11/8.70×8.70

=1.60

The chemical equation for the reaction of the monohydrogen phosphate ion (HPO₄²⁻) with water (H₂O) is: HPO₄²⁻ + H₂O → H₂PO₄⁻ + OH⁻

In this reaction, the monohydrogen phosphate ion reacts with water to form dihydrogen phosphate (H₂PO₄⁻) and hydroxide ion (OH⁻). The monohydrogen phosphate ion donates a proton (H⁺) to a water molecule, resulting in the formation of the dihydrogen phosphate ion.

Simultaneously, the water molecule accepts the proton, leading to the production of the hydroxide ion. This reaction can occur because the monohydrogen phosphate ion is amphoteric, meaning it can act as both an acid and a base.

The resulting products, dihydrogen phosphate and hydroxide ions, contribute to the pH and ionic balance in aqueous solutions.

To learn more about balanced chemical equations visit:

brainly.com/question/28294176

#SPJ4

When going down stairs, choosing to go two steps at a time will result in changes to both potential and kinetic energy. Option B is the correct statement as going down two steps at a time increases the distance traveled, leading to a decrease in potential energy, while the landing impact reduces the kinetic energy.

Option B accurately describes the changes in potential and kinetic energy when going down stairs two steps at a time. As you descend two steps at a time, you cover a greater vertical distance compared to going one step at a time. This increase in distance decreases your potential energy since potential energy is directly related to height. With each step, you experience a decrease in potential energy as you get closer to the ground.

However, when you land on the stair after going down two steps, your kinetic energy is reduced. This is because landing involves a sudden stop and impact, which leads to a dissipation of energy. The energy that was initially in the form of kinetic energy gets transferred to other forms, such as sound or heat. As a result, your overall kinetic energy is reduced compared to going down one step at a time, where each landing impact is less forceful.

Therefore, while the potential energy decreases due to the increased distance traveled, the kinetic energy decreases due to the landing impact when going down stairs two steps at a time.

Learn more about energy here: https://brainly.com/question/29763772

#SPJ11

Speed

Explanation:

The distance travelled by a body per unit time

Answer:

The volume of 5.0 g CO2 is 2.6 L CO2 at STP.

Explanation:

hope this helps :)

The molar solubility of aluminum hydroxide, Al(OH)₃, in a 0.015 M solution of aluminum nitrate, Al(NO₃)₃, is approximately 3.67x10⁻¹¹ M. Option A is correct.

To calculate molar solubility of aluminum hydroxide (Al(OH)₃) in a solution of aluminum nitrate (Al(NO₃)₃), we will consider the common ion effect. Aluminum nitrate is a source of aluminum ions (Al³⁺), which will affect the solubility of aluminum hydroxide.

Balanced equation for the dissociation of aluminum hydroxide will be;

Al(OH)³(s) ⇌ Al³⁺(aq) + 3OH⁻(aq)

In the presence of aluminum nitrate, the aluminum ions from Al(NO₃)₃ will react with the hydroxide ions, reducing the amount of hydroxide ions available for the dissociation of aluminum hydroxide.

Let's assume the molar solubility of aluminum hydroxide in the presence of aluminum nitrate is represented by "s". The concentration of aluminum ions (Al³⁺) from aluminum nitrate is 0.015 M.

The equilibrium expression for the dissociation of aluminum hydroxide is:

Ksp = [Al³⁺][OH⁻]³

Considering the common ion effect, the concentration of hydroxide ions can be expressed as (s - 3x), where "x" represents the decrease in hydroxide ion concentration due to the reaction with aluminum ions.

Substituting the concentrations into the equilibrium expression, we have:

2x10⁻³² = (0.015)(s - 3x)³

Simplifying and neglecting the small contribution of 3x compared to s, the equation becomes;

2x10⁻³² ≈ 0.015s³

To solve for "s," we can rearrange the equation and solve for the cube root:

s ≈ (2x10⁻³² / 0.015[tex])^{(1/3)}[/tex]

Calculating this expression gives us the molar solubility of aluminum hydroxide in the presence of aluminum nitrate;

s ≈ 3.67x10⁻¹¹ M

Hence, A. is the correct option.

To know more about molar solubility here

https://brainly.com/question/31488311

#SPJ4

--The given question is incomplete, the complete question is

"Calculate the molar solubility of aluminum hydroxide, Al(OH)₃, in a 0.015M solution of aluminum nitrate, Al(NO₃)₃. The Ksp of Al(OH)₃ is 2x10⁻³² A) 3.67x10⁻¹¹ M B) 5x10⁻⁸ M C) 3x10⁻¹⁵ M D) 7x10⁻¹² M."--

Answer:

[tex]Q=20.6\frac{J}{g}[/tex]

Explanation:

Hello there!

In this case, according to the equation for the calculation of the heat during a heating process:

[tex]Q=mC(T_f-T_i)[/tex]

It is possible to compute it per gram of ice by just removing m from the equation by dividing at both sides. Next we plug in the given specific heat and the final and initial temperatures to obtain:

[tex]Q=2.06\frac{J}{g\°C}[-15\°C-(-25\°C)] \\\\Q=20.6\frac{J}{g}[/tex]

Best regards!

Answer:

I think its boiling point conductivity

Answer: boiling point

Explanation:

Got it right

Answer:

Adapun frasa INTEGRASI BANGSA atau INTEGRASI NASIONAL sendiri dimaknai dalam dua konteks yakni POLITIS dan ANTROPOLOGIS. Dalam konteks politis, Integrasi Nasional bermakna sebagai penyatuan berbagai macam kelompok sosial juga budaya ke dalam suatu kesatuan wilayah yang membentuk suatu identitas nasional.

Explanation:

Dissolved Oxygen (option D) does not cause water pollution. It is an essential component of water quality and supports aquatic life.

Water pollution refers to the contamination of water bodies, such as rivers, lakes, and oceans, by harmful substances. While all the options listed are associated with water quality, the one that does not cause water pollution is Dissolved Oxygen (option D).

Dissolved Oxygen refers to the presence of oxygen molecules dissolved in water. It is crucial for the survival of aquatic organisms, as they rely on it for respiration. Adequate levels of dissolved oxygen support healthy ecosystems and biodiversity in aquatic environments.

On the other hand, the remaining options, namely Domestic Waste (option A), Insecticides and Herbicides (option B), and Heavy Metals (option C), can contribute to water pollution. Domestic waste may contain organic matter, pathogens, and chemicals that can contaminate water sources. Insecticides and herbicides are chemical substances used to control pests and weeds, and their runoff into water bodies can harm aquatic organisms. Heavy metals, such as mercury, lead, and cadmium, can accumulate in water and have toxic effects on aquatic life.

learn more about water pollution here; brainly.com/question/27177717

#SPJ11

The enthalpy change for the sublimation of iodine I₂(s) → I₂(g) is 62 kJ/mol.

The correct answer is E: 62 kJ/mol

The enthalpy change for the sublimation of iodine (I₂) is determined using Hess's Law which states that the total enthalpy change of a reaction is independent of the pathway taken.

Given the two equations:

½ H₂(g) + ½ I₂(s) → HI(g) ΔH = 26 kJ/mol  ---- (1)

½ H₂(g) + ½ I₂(g) → HI(g) ΔH = -5.0 kJ/mol ---- (2)

The equation of the sublimation of iodine is given below as follows:

I₂(s) → I₂(g)

Subtracting equation 2 from equation 1 to eliminate HI (g) gives the equation of the sublimation of iodine:

[½ H₂(g) + ½ I₂(s) → HI(g)] - [½ H₂(g) + ½ I₂(g) → HI(g)] = 26 kJ/mol - (-5.0 kJ/mol)

Simplifying:

½ I₂(s) → ½ I₂(g) ΔH = 31 kJ/mol

Multiplying the equation above by 2 gives the equation of the sublimation of iodine

I₂(s) → I₂(g) = 62 kJ/mol

Learn more about enthalpy change at: https://brainly.com/question/15174388

#SPJ4

Answer:

CuCl2 + 2NaNO3 -------> Cu(NO3)2 + 2NaCl

hope this helps

good day mate

Explanation:

fgIf the piston moves so as to increase the pressure of the gas to 2.94 atm, ... new volume of the cylinder? ... A gas has a pressure of 699.0 mm Hg at 40.0°C. What is the temperature (in C) ...

Answer: a

Explanation:

The highest entropy will be 0 mL of water at 100°C.

Entropy is just a measured physical quality that will be most usually linked with disorder, unpredictability, or uncertainty.

The quantity of random movement in a system increases as more energy is put into it. Entropy rises like a volume increases in a system.

Therefore, the correct answer will be option 1.

To know more about entropy.

https://brainly.com/question/13146879

#SPJ2

The required actual work output of the turbine is 1.2 Mj/kg.

If the isentropic efficiency of the turbine is 80%, calculate the actual work output of the turbine, in kj/kg.A steam turbine receives steam at a particular pressure and temperature and discharges it at a lower pressure and temperature. In general, the steam turbine's work output is less than the maximum possible work output, which is known as the isentropic turbine work output. The ratio of the actual turbine work output to the isentropic turbine work output is known as the isentropic turbine efficiency.ηt = Wtisentropic/WtactualWhere,ηt = isentropic turbine efficiencyWtisentropic = isentropic turbine work outputWtactual = actual turbine work outputGiven, isentropic efficiency of the turbine is 80%.ηt = 80% or ηt = 0.8We know thatWtactual = ηt x Wtisentropicor Wtisentropic = Wtactual/ ηtWe also know thath1 = 3.6 Mj/kgh2 = 2.1 Mj/kghence,Δh = h1 - h2 = 3.6 - 2.1 = 1.5 Mj/kgNow we have, Wtisentropic = Δh = 1.5 Mj/kgWtactual = ηt x Wtisentropic = 0.8 x 1.5= 1.2 Mj/kgTherefore, the actual work output of the turbine is 1.2 Mj/kg.

Learn more about the isentropic here,

https://brainly.com/question/15241334

#SPJ11

The mole information of a substance is directly related to its chemical formula. The coefficients in a balanced chemical equation represent the mole ratios between the reactants and products.

The chemical formula of a substance provides information about the types and numbers of atoms present in a molecule or formula unit. It serves as a concise representation of the composition of the substance.

For example, consider the balanced equation for the combustion of methane with oxygen:

[tex]CH_4 + 2O_2[/tex] →[tex]CO_2 + 2H_2O[/tex]

From this equation, we can determine that one mole of methane reacts with two moles of oxygen to produce one mole of carbon dioxide and two moles of water. The coefficients (1, 2, 1, and 2) indicate the mole ratios between the reactants and products.

The mole information provided by the chemical formula and the coefficients in a balanced chemical equation allow us to determine the stoichiometry of a reaction, including the number of moles of each substance involved. This relationship between the mole information and the chemical formula is essential for performing stoichiometric calculations and understanding the quantitative aspects of chemical reactions.

Learn more about stoichiometry here:

https://brainly.com/question/28780091

#SPJ11

Answer: This is because of the different chemical composition of the types of detergents affects their cleansing actions.

Explanation:

Detergent means any substance which has the ability to clean an object. This includes soaps, soap powers and dish washing liquids as well as water. Detergents fall into two main types

--> Soapy detergents and

--> Soapless detergents

Soapy detergents are sodium salts of fatty acids. They are saponification products of fats and oils. In the chemical composition, each molecule of soap possesses a long hydrocarbon chain attached to an ionic head. The hydrocarbon tail is hydrophobic, so it is insoluble in water but soluble in oil and organic solvents. The ionic head is hydrophilic, so it is soluble in water. Due to this dual nature, when is dissolved in water, the soap molecule forms spherical clusters called MICELLES( hydrocarbon tails points inward and ionic heads point outward). Repulsion between the similarly charged ionic heads keeps the micelles apart. This property helps the soapy detergent to lift grease from grease coated fabrics when applied to it.

While the chemical properties of the Soapless detergents has a hydrophobic tail and a hydrophilic head. The hydrophobic tail is either a long chain hydrocarbon or a benzene ring with a long alkyl group attached. The hydrophilic head, unlike the Soapy detergents, can be positively or negatively charged or even neutral. These chemical properties makes it to have a more favourable and wider application than soapy detergent.it is suitable for washing acid - sensitive fabrics and for breaking up oil slicks.

Answer:

true

Explanation:

Answer:

true

Explanation:

when the temperature of the gas is decreased or pressure on the gas is increased, the gas becomes liquid at a certain temperature or pressure.

The estimate is still useful because it provides insight into the behavior of water molecules at the surface of the liquid.

Molar mass of water, M = 18g/molDensity of water, ρ = 1g/cm³ = 1000kg/m³The number of molecules per unit surface area of water can be estimated as follows:Number of water molecules per unit volume of water = Avogadro's number, NA / MNumber of water molecules per unit volume of water = 6.022 × 10²³ / 18 = 3.345 × 10²² / molThe number of molecules per unit surface area of water = the number of molecules per unit volume of water × the thickness of the water layer on the surface= 3.345 × 10²² / m³ × 1 × 10⁻⁸ m= 3.345 × 10¹⁴ / m²b)Given:Coordination number of water, CN = 4Binding energy of hydrogen bond, E = 10⁻²⁰ JThe surface tension of water, γ water = 0.072 N/mEnergy required to bring one molecule from the bulk of the liquid to the surface of the liquid, ΔE= γ water × AThe total binding energy of a water molecule in the liquid state = the binding energy of one hydrogen bond × the coordination number= 10⁻²⁰ J/bond × 4 bonds = 4 × 10⁻²⁰ JThe number of molecules per unit surface area of water = the energy required to bring one molecule from the bulk of the liquid to the surface of the liquid / the total binding energy of a water molecule in the liquid state= ΔE / 4 × 10⁻²⁰= 0.072 / (4 × 10⁻²⁰)= 1.8 × 10²⁰The surface tension of water can also be expressed as follows:γ water = (N / A) × EThe number of hydrogen bonds per unit area, N / A = γ water / E= 0.072 / 10⁻²⁰ = 7.2 × 10¹⁸ / m²The difference between the estimated value and the observed value is relatively large (about a factor of 25). It is because this is just an estimate, and it does not consider all the factors affecting the surface tension of water. However, the estimate is still useful because it provides insight into the behavior of water molecules at the surface of the liquid.

Learn more about liquid here:

https://brainly.com/question/20922015

#SPJ11

Answer:

1.3244 x 10⁴⁹ atoms of zinc

Explanation:

2.20 x 10²⁵ moles

To convert from moles to atoms, we multiply by Avogadro's Number, 6.02 x 10²³

2.20 x 10²⁵ • 6.02 x 10²³

= 1.3244 x 10⁴⁹ atoms of zinc

Hope this helps!

In a collection of marbles, 25% of the marbles have a mass of 5.00 g and 75% of the marbles have a mass of 7.00 g. The average mass of a marble is 6.50 g.

Answer:

To calculate the amount of heat released we have equation, use the equation Q = mc ΔT,

where

m= 35g

c= 2.46 J/g°C

ΔT=T2-T1 = 78-25= 53°C

now Q = mcΔT

Q = 35×2.46×53

Q = 4563.3 joule

Conclusion 4563.3 Joules of energy are transferred from the stove burner to the ethanol to create this temperature change!

Answer:

false

Explanation:

energy can't be destroyed

Answer:

A - meiosis results in two genetically identical offspring cell

Explanation:

Mitosis produces two diploid (2n) somatic cells that are genetically identical to each other and the original parent cell, whereas meiosis produces four haploid (n) gametes that are genetically unique from each other and the original parent (germ) cell.

Answer:

The answer is C

Explanation:

I took the test on AP3X

At pH 5.0, the predominant species of the peptide E-D-K-R-A-S-T has a net positive charge of +2.

To predict the charge on the predominant species of the peptide E-D-K-R-A-S-T at pH 5.0, we need to consider the pKa values of the amino acids involved and the pH of the solution. The pKa values represent the acidity or basicity of the functional groups present in the amino acids.

1. At pH 5.0, the carboxyl group of glutamic acid (E) and aspartic acid (D) will be protonated, resulting in a positive charge on these amino acids. So, E and D will have a positive charge.

2. Lysine (K), arginine (R), histidine (H), and the N-terminus of the peptide have amino groups that can act as bases. At pH 5.0, these amino groups will be protonated, resulting in a positive charge on K, R, H, and the N-terminus.

3. Threonine (T), serine (S), and the C-terminus of the peptide do not have ionizable groups at pH 5.0 and will remain uncharged.

Therefore, at pH 5.0, the predominant species of the peptide E-D-K-R-A-S-T will have a net positive charge due to the protonation of E, D, K, R, H, and the N-terminus. The charge can be represented as follows:

E-D-K-R-A-S-T (at pH 5.0): 2+

Learn more about amino acids here:

https://brainly.com/question/30587649

#SPJ4

Answer:

im not 2100][dskcmaln,NMCS KHJBXsjk[pl,;maxkcjxnxxxxxxxxxxxxxas'j

Explanation:

mnkc