i suck at math and i’m tired of it, please help + 100 points

The solution is, Andy will need 102 ft of stones in total.

The trapezoid in question is an isosceles trapezoid with base lengths of 12 ft and 8 ft and both sides equal to 7 ft.

       ____8 ft___

      /                    \

7 ft /                      \ 7 ft

    /____________\

             12 ft

The perimeter of a single trapezoid is:

P = 8 ft + 7 ft + 7 ft + 12 ft = 34 ft

Andy will need 34 ft of stones per trapezoid.

So in total:

3 x 34 ft = 102 ft

Andy will need 102 ft of stones in total.

Learn more about perimeter here:

brainly.com/question/397857

#SPJ1

complete question:

andy is making 3 trapezoidal garden boxes for his backyard. Each trapezoid will be the size of the trapezoid below. He will place stone blocks around the borders of the boxes. How many feet of stones will andy need.

To answer your question, it is possible to make a process more capable by doing all of the following things EXCEPT:
B. Making the specification limits wider

While ensuring that the process is centered (A) and ensuring the process is in control (C) contribute to improved process capability, making the specification limits wider (B) does not inherently make the process more capable, as it might lead to reduced quality and increased variability.

Process capability is a measure of how well a process can consistently produce output that meets the specification limits. It is influenced by various factors, including the centering of the process (A), the stability and control of the process (C), and the variability of the process output.

Centering the process (A) involves aligning the process mean or target value with the midpoint of the specification limits. This helps to minimize the potential for producing output that falls outside the specification limits, thereby improving process capability.

Ensuring the process is in control (C) means that the process is stable and predictable, with common causes of variation being identified and addressed. This helps to reduce variability in the process output, which in turn improves process capability.

On the other hand, widening the specification limits (B) without addressing the underlying causes of process variability does not inherently make the process more capable. In fact, it can lead to reduced quality and increased variability, as it allows for a larger range of output to be considered acceptable, even if it falls further from the ideal target value. This can result in increased defects and non-conforming output, negatively impacting process capability.

To learn more about limits, refer below:

https://brainly.com/question/8533149

#SPJ11

To answer your question, it is possible to make a process more capable by doing all of the following things EXCEPT:
B. Making the specification limits wider

While ensuring that the process is centered (A) and ensuring the process is in control (C) contribute to improved process capability, making the specification limits wider (B) does not inherently make the process more capable, as it might lead to reduced quality and increased variability.

Process capability is a measure of how well a process can consistently produce output that meets the specification limits. It is influenced by various factors, including the centering of the process (A), the stability and control of the process (C), and the variability of the process output.

Centering the process (A) involves aligning the process mean or target value with the midpoint of the specification limits. This helps to minimize the potential for producing output that falls outside the specification limits, thereby improving process capability.

Ensuring the process is in control (C) means that the process is stable and predictable, with common causes of variation being identified and addressed. This helps to reduce variability in the process output, which in turn improves process capability.

On the other hand, widening the specification limits (B) without addressing the underlying causes of process variability does not inherently make the process more capable. In fact, it can lead to reduced quality and increased variability, as it allows for a larger range of output to be considered acceptable, even if it falls further from the ideal target value. This can result in increased defects and non-conforming output, negatively impacting process capability.

To learn more about limits, refer below:

https://brainly.com/question/8533149

#SPJ11

Answer :- The value of dzdt at (x, y) = (4, 0) is 0

To find dzdt at (x, y) = (4, 0) given z^3 = x^3 y^2, dxdt = 3, and dydt = 2, follow these steps:

1. Write down the given equation: z^3 = x^3 y^2
2. Differentiate both sides with respect to t (using the chain rule and product rule): 3z^2(dzdt) = 3x^2(dxdt) * y^2 + x^3 * 2y(dydt)
3. Plug in the given values dxdt = 3, dydt = 2, and (x, y) = (4, 0): 3z^2(dzdt) = 3(4^2)(3) * 0^2 + 4^3 * 2(0)(2)
4. Since y = 0, the right side of the equation becomes 0: 3z^2(dzdt) = 0
5. However, we are given z > 0, which means z is not equal to 0. Thus, we can divide both sides by 3z^2: dzdt = 0

So, the value of dzdt at (x, y) = (4, 0) is 0.

learn more about "dzdt":-https://brainly.com/question/954654

#SPJ11

The correct option is (b) a strict partial order.

In the context of a tree (T) with nodes and a descendant relation, the correct option is (b) a strict partial order.

Your answer: The descendant relation on the nodes of a fixed tree (T) is a strict partial order. This is because the relation satisfies the following properties:
1. Irreflexivity: A node cannot be a descendant of itself.
2. Transitivity: If node A is a descendant of node B, and node B is a descendant of node C, then node A is also a descendant of node C.
3. Asymmetry: If node A is a descendant of node B, then node B cannot be a descendant of node A.

These properties define a strict partial order.

Learn more about descendant relation

brainly.com/question/29728346

#SPJ11

-3 is the value of x in linear equation.

What is a linear equation in mathematics?

A linear equation in algebra is one that only contains a constant and a first-order (direct) element, such as y = mx b, where m is the pitch and b is the y-intercept.

                         Sometimes the following is referred to as a "direct equation of two variables," where y and x are the variables. Direct equations are those in which all of the variables are powers of one. In one example with just one variable, layoff b = 0, where a and b are real numbers and x is the variable, is used.

2(x−3) = 4x

  x - 3 = 2x

    2x - x = -3

        x = -3

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

Answer:

y = |x| -1

Step-by-step explanation:

one unit downward would change the overall Y value by -1 unit

The machine is not operating satisfactorily, and an adjustment is needed because the sample mean is outside the acceptable range.

Based on the given information, we need to determine if the soft-drink machine is operating satisfactorily and does not require any adjustment.

To do this, we will compare the sample mean (x) with the acceptable interval of the population mean (µ) as per the provided condition.

We are given that:
Population mean (µ) = 12 ounces
Standard deviation (σ) = 0.15 ounces
Sample size (n) = 81 drinks
Sample mean (x) = 11.8 ounces
z-score = ±1.960

Step 1: Calculate the standard error (SE) using the formula SE = σ/√n:
SE = 0.15/√81 = 0.15/9 = 0.0167

Step 2: Calculate the acceptable range using the provided z-score:
Lower limit = µ - z × SE

= 12 - 1.960 × 0.0167

≈ 11.967

Upper limit = µ + z × SE

= 12 + 1.960 × 0.0167

≈ 12.033

The acceptable range for the average content of the drinks is between 11.967 ounces and 12.033 ounces.

Since the sample mean (11.8 ounces) is outside this acceptable range, the machine is not operating satisfactorily, and an adjustment is needed.

Learn more about mean:

https://brainly.com/question/20118982

#SPJ11

Using the Central Limit Theorem, the standard deviation of the distribution of sample means for samples of size 65 from a population with mean 55.3 and standard deviation 9.2 is approximately 1.1.

According to the Central Limit Theorem, the distribution of sample means will have a mean equal to the population mean, which is 55.3, and a standard deviation equal to the population standard deviation divided by the square root of the sample size.

So the standard deviation of the distribution of sample means for samples of size 65 is

σ = σ_population / √(n) = 9.2 / √(65) = 1.14

Rounding to one decimal place, the standard deviation of the distribution of sample means for samples of size 65 is approximately 1.1.

To know more about standard deviation:

https://brainly.com/question/23907081

#SPJ4

The area enclosed by the curve r=2sin(θ) 3sin(9θ) over the interval [0,2π/9] is (243π/64) - (3√3/16).

To find the area enclosed by the curve r=2sin(θ) 3sin(9θ), we first need to determine the limits of integration for θ.

Since the curve is periodic with period 2π/9 (due to the 9 in the second term), we only need to consider the portion of the curve in the interval [0, 2π/9].

Next, we need to convert the polar equation to rectangular coordinates, which can be done using the formulas x = r cos(θ) and y = r sin(θ).

Plugging in the given equation, we get:

x = 2sin(θ) cos(θ) + 3sin(9θ) cos(θ)
y = 2sin(θ) sin(θ) + 3sin(9θ) sin(θ)

Now we can find the area enclosed by the curve by integrating over the given interval:

A = ∫[0,2π/9] (1/2) [x(θ) y'(θ) - y(θ) x'(θ)] dθ

Using the formulas for x and y, we can find the derivatives x'(θ) and y'(θ):

x'(θ) = 2cos(θ) cos(θ) - 2sin(θ) sin(θ) + 27cos(9θ) cos(θ) - 27sin(9θ) sin(θ)
y'(θ) = 2cos(θ) sin(θ) + 2sin(θ) cos(θ) + 27cos(9θ) sin(θ) + 27sin(9θ) cos(θ)

Substituting these expressions into the formula for A and evaluating the integral, we get:

A = (243π/64) - (3√3/16)

Therefore, the area enclosed by the curve r=2sin(θ) 3sin(9θ) over the interval [0,2π/9] is (243π/64) - (3√3/16).

Learn more about area enclosed by polar curves

brainly.com/question/15573662

#SPJ11

Answer:

[tex] \sqrt[8 \\ \\ ]{3} [/tex]

Check the picture below.

[tex](8+16)(8)=(12+x)(12)\implies 192=144+12x \\\\\\ 48=12x\implies \cfrac{48}{12}=x\implies 4=x[/tex]

Answer:

Step-by-step explanation:

In a direct variation, y and x are directly proportional to each other, so we can write:

y = kx

where k is a constant of variation.

To find k, we can use the given values of x and y:

y = kx

84.7 = k(77)

Solving for k:

k = 84.7/77

k = 1.0994

So the direct variation equation that shows the relationship between x and y is:

y = 1.0994x

The factored form of the trinomial is (x-3) and (x-6).

What is factorization?

A number or other mathematical object is factorized or factored when it is written as the product of numerous factors, typically smaller or simpler things of the same kind.

Here, we have

Given: Consider the trinomial x² – 9x + 18.

We have to find which pair of numbers have a product of ac and a sum of b and factored form of the trinomial.

x² – 9x + 18

a = 1

b = -9

c = 18

We are to get two values that we must add to get b, and that we will multiply which will give c.

The given values are -6 and -3

Check:

-6 + (-3) = - 6 - 3 = -9

-6(-3) = 18

Factorize the trinomial

= x² – 9x + 18

=  x² - 6x - 3x + 18

= x(x-6) - 3(x-6)

= (x-6)(x-3)

Hence, the factored form of the trinomial is (x-3) and (x-6).

To learn more about the factorization from the given link

https://brainly.com/question/10718512

#SPJ1

Answer:28

Step-by-step explanation: the whole angle has to sum to 90 ( 62 + x =90) so take away 90 from 62 to get x

Answer:

90

Step-by-step explanation:

just look at it with a ruler

Toshi is correct with the value of 1. 7 × 10^1 times

Owen made a mistake of multiplying the values instead of dividing.

Ratio can be described as the comparison of two or more numbers or elements indicating their their sizes in relation to each other.

It is used to shows how many times one number contains another.

From the information given, we have that;

Mass of Earth = 5.97 x 10^24 kg.

Mass of Neptune = 1.024 x 10^26 kg

To determine the number of times greater, we have;

Mass of Neptune/Mass of Earth

1.024 x 10^26/5.97 x 10^24

Divide the values

0. 17 × 10 ^2

1. 7 × 10^1 times

Toshi is correct with the value 1. 7 × 10^1 times

Learn about ratio at: https://brainly.com/question/2328454

#SPJ1

Dimensions of the corral with maximum area are;

x = 200 ft
y = 100 ft

We'll use the given terms and solve for x and y.

1. Write the equation for the perimeter of the corral.
The corral has three sides of the rectangle (2x + y) and half the circumference of the semicircle (0.5 × π ×  y). The total fencing is 600 ft.
Equation: 2x + y + 0.5 × π ×y = 600

2. Solve for y in terms of x.
y(1 + 0.5 × π) = 600 - 2x
y = (600 - 2x) / (1 + 0.5 × π)

3. Write the equation for the area of the corral.
The corral's area is the sum of the rectangle area (x × y) and the semicircle area (0.5 × π × (y/2)²).
Equation: A(x) = x × y + 0.5 × π × (y/2)²

4. Substitute y in the area equation.
A(x) = x × [(600 - 2x) / (1 + 0.5 × π)] + 0.5 × π × ([(600 - 2x) / (1 + 0.5 × π)]/2)²

5. Find the derivative of the area equation with respect to x.
A'(x) = dA/dx

6. Set the derivative equal to zero and solve for x.
A'(x) = 0

7. Calculate the corresponding y value using the equation in step 2.

After performing the above calculations, you'll find the dimensions of the corral with maximum area:

x = 200 ft
y = 100 ft

Learn more about maximum area.

brainly.com/question/11906003

#SPJ11

The rate of change, based on y is a function of the distance traveled, z, and what it means is B. The ride costs $3 per mile.

The rate of change is the unit rate or the slope.

The rate of change also refers to the variable cost per unit.

The variable cost can be differentiated from the fixed cost since it varies according to the quantity involved.

Distance (mi), z Total Cost ($) y  Rate of Change

       0                        2                        $0

       1                         5                        $3 ($5 - $2)

      2                         8                        $3 ($8 - $5)

      3                         11                       $3 ($11 - $8)

      4                         14                       $3 ($14 - $11)

The Rate of Change = The Slope = Rise/Run = ($5 - $2)/(1 - 0)

Thus, based on the total cost of a ride-sharing trip, the unit rate is $3 per mile.

Learn more about the unit rate or rate of change at https://brainly.com/question/4895463.

#SPJ1

No, you would be obtaining a convenience sample and not a random sample.(A)

By walking around your school campus and asking people you met how many keys they were carrying, you would be obtaining a convenience sample. A convenience sample is a type of non-random sampling method where the participants are chosen based on their availability and accessibility.

This method is not truly random, as it relies on your chance encounters with people and does not give every individual within the population an equal chance of being included in the sample.

A random sample, on the other hand, would involve selecting participants in a way that ensures each person has an equal opportunity to be chosen, which can reduce potential biases and increase the representativeness of the sample.(A)

To know more about convenience sample click on below link:

https://brainly.com/question/30313430#

#SPJ11

complete question:

If you walked around your school campus and asked people you met how many keys they were carrying, would you be obtaining a random sample? Chose the correct answer below.

A. No, you would be obtaining a convenience sample and a random sample.

B. Yes, you would be obtaining a random sample.

C. As long as you surveyed at least 100 people you would be obtaining a simple random sample.

D. No, you would be obtaining a biased sample.

In this multiple choice question, none of the given statements are true.

I will analyze each statement using the given terms:

1. 278 = 2 - 124 + 30
To check this, perform the calculation on the right-hand side: 2 - 124 + 30 = -122 + 30 = -92. This is not equal to 278, so this statement is false.

2. 124 = 4 - 30 + 4
Perform the calculation on the right-hand side: 4 - 30 + 4 = -26 + 4 = -22. This is not equal to 124, so this statement is false.

3. 4 = 2 - 2 + 0
Perform the calculation on the right-hand side: 2 - 2 + 0 = 0 + 0 = 0. This is not equal to 4, so this statement is false.

4. 30 = 30 - 1 + 0
Perform the calculation on the right-hand side: 30 - 1 + 0 = 29 + 0 = 29. This is not equal to 30, so this statement is false.

5. 4 = 4 + 0 + 4
Perform the calculation on the right-hand side: 4 + 0 + 4 = 4 + 4 = 8. This is not equal to 4, so this statement is false.

6. 30 = 7.4 + 2
Perform the calculation on the right-hand side: 7.4 + 2 = 9.4. This is not equal to 30, so this statement is false.

None of the given statements are true.

Learn more about multiple choice.

brainly.com/question/27934558

#SPJ11

The volume of the tetrahedron is 1/18 cubic units.

To find the volume of the given solid, we can use a triple integral over the region of the volume of the tetrahedron is 1/18 cubic units.that corresponds to the solid.

The tetrahedron is enclosed by the coordinate planes (x=0, y=0, z=0) and the plane 3x + y + z = 2.

To set up the triple integral, we need to find the bounds of integration for x, y, and z.

From the equation of the plane, we can solve for z in terms of x and y:

z = (2 - 3x - y)/3

Since z=0 is one of the coordinate planes bounding the tetrahedron, we can set (2 - 3x - y)/3 = 0 and solve for y in terms of x:

y = 2 - 3x

Similarly, since y=0 is another bounding plane, we can set (2 - 3x - y)/3 = 0 and solve for x in terms of y:

x = (2 - y)/3

Finally, since x=0 is the third bounding plane, we don't need to solve for anything.

Therefore, the bounds of integration are:

0 ≤ x ≤ 2/3

0 ≤ y ≤ 2 - 3x

0 ≤ z ≤ (2 - 3x - y)/3

The volume of the tetrahedron is then given by the triple integral:

V = ∭[tex]_ R dV = \int _0 ^{2/3} \int _ 0 ^ 2-3x \int _0 ^{(2-3x-y)/3} dz dy dx[/tex]

Evaluating this integral yields:

V = 1/18

Therefore, the volume of the tetrahedron is 1/18 cubic units.

Learn more about triple integral

brainly.com/question/2289273

#SPJ11

The word problem's solution states that 86 adult tickets were sold on that particular day.

A mathematical statement that demonstrates the equality of two expressions is called an equation. The two expressions are separated by the equal character "=". Variables, constants, and mathematical operations like multiplication, division, addition, subtraction, exponents, etc. may be used in the equations on either side of the equal sign.

Assume that "c" represents the number of child tickets sold and "a" represents the number of adult tickets sold.

From the information provided, we understand that:

A young person's ticket costs $6.10

A ticket for an adult costs $9.40.

There have been 136 tickets sold in total.

$1027.60 has been earned in total from the selling of tickets.

To express the provided information, we can put up two equations:

c + a = 136 (Equation 1: amount of tickets sold overall)

6.10c + 9.40a = 1027.60 (Equation 2: the total amount made from ticket sales)

Equation 1 can be used to express "c" in terms of "a" in order to solve for "a":

c = 136 - a

By entering this expression in place of "c" in Equation 2, we obtain:

6.10(136 - a) + 9.40a = 1027.60

By enlarging and streamlining this equation, we arrive at:

830.96 - 2.3a = 1027.60

830.96 from both sides is subtracted to arrive at:

-2.3a = 196.64

By multiplying both sides by -2.3, we obtain:

a ≈ 85.5

We can round this up to 86 as "a" denotes the quantity of adult tickets that were sold. As a result, 86 adult tickets were sold on that particular day.

To know more about Expression visit:

brainly.com/question/1859113

#SPJ1

We can use the tangent function to find the angle of elevation:

tan(theta) = opposite / adjacent

where opposite is the height of the kite and adjacent is the length of the string.

tan(theta) = 122 / 325

theta = arctan(122/325)

Using a calculator, we find that theta is approximately 20.2 degrees.

However, this angle is not the angle of elevation that we want. We want the angle between the string and the ground, which is the complement of theta:

90 - theta = 90 - 20.2 = 69.8

Rounding to the nearest degree, the angle of elevation is approximately 70 degrees.

[tex]\huge{\colorbox{black}{\textcolor{lime}{\textsf{\textbf{I\:hope\:this\:helps\:!}}}}}[/tex]

[tex]\begin{align}\colorbox{black}{\textcolor{white}{\underline{\underline{\sf{Please\: mark\: as\: brillinest !}}}}}\end{align}[/tex]

[tex]\textcolor{blue}{\small\texttt{If you have any further questions,}}[/tex] [tex]\textcolor{blue}{\small{\texttt{feel free to ask!}}}[/tex]

♥️ [tex]{\underline{\underline{\texttt{\large{\color{hotpink}{Sumit\:\:Roy\:\:(:\:\:}}}}}}\\[/tex]

The interest factor being referred to in the given table appears to be a compound interest factor.

The table contains a list of values corresponding to different time periods (end of year 6, 2, 3, 4, and 5) and their respective numerical values (1.06000, 1.12360, 1.19102, 1.26248, and 1.33823). These values represent the factor by which an initial amount would be multiplied in order to calculate the compound interest at the end of each time period. Compound interest refers to the interest that is calculated not only on the initial principal amount, but also on the accumulated interest from previous periods. Therefore, the table is showing the compound interest factor for different time periods.

The interest factors in the table are increasing, which means that the interest is compounding and accumulating over time. This suggests that the interest is being calculated based on a compound interest formula, such as the formula A = P(1 + r/n)^(nt), where A represents the final amount, P represents the principal amount, r represents the annual interest rate, n represents the number of times interest is compounded per year, and t represents the number of years. The values in the table are the result of applying this formula to different time periods with varying interest rates and compounding frequencies.

Therefore, based on the values and their increasing trend in the table, it can be concluded that the interest factor being referred to is a compound interest factor

Therefore, this table is related to compound interest.

To learn more about compound interest here:

brainly.com/question/29335425#

#SPJ11

We can use the z-score associated with the 80th percentile to calculate the upper bound of the interval using the formula: sample mean + 0.84*(σ/√n).

To round the answer to at least two decimal places, we need to know the values of n and σ. Without that information, we can't provide a specific numerical answer.

To find the 80th percentile of the sample mean, we first need to calculate the sample mean and standard deviation. Let's assume we have a sample of size n and we know the population standard deviation σ.

Using the central limit theorem, we know that the sample mean follows a normal distribution with mean μ and standard deviation σ/√n. Since we don't know the population mean μ, we can use the sample mean as an estimate.

Next, we need to find the z-score associated with the 80th percentile. We can use a z-table or a calculator to find that z = 0.84.

Finally, we can use the formula for the confidence interval of the sample mean:

sample mean ± z*(standard deviation/√n)

Plugging in the values, we get:

sample mean ± 0.84*(σ/√n)

Since we're looking for the upper bound of the 80th percentile, we only need to consider the positive value of the interval:

sample mean + 0.84*(σ/√n)

This represents the value that separates the top 20% of sample means from the bottom 80%.

Learn more about sample mean here: brainly.com/question/31101410

#SPJ11

The graph of g(x) is a horizontal line passing through (-1, 0) with a slope of -4.

To perform the transformations on the graph of f(x) = x, we need to follow the order of transformations:

Therefore, the function g(x) can be obtained by applying all these transformations to f(x) as follows:

g(x) = -2f(2x + 1) + 1

= -2(2x + 1) + 1 (applying f(x) = x)

= -4x - 1

So the graph of g(x) is a horizontal line passing through (-1, 0) with a slope of -4.

Read more about transformations at

https://brainly.com/question/4289712

#SPJ1

The calculated value of the area of the figure  is 157 sq ft

From the question, we have the following parameters that can be used in our computation:

Composite figure

The shapes in the composite figure are

This means that

Area = Parallelogram + trapezoid

Using the area formulsa on the dimensions of the individual figures, we have

Area = 8 * 6.5 + 1/2 * (15 + 20) * 6

Evaluate

Area = 157

Hence, the area of the figure below  is 157 sq ft

Read more about area

https://brainly.com/question/24487155

#SPJ1

The measure of the length of the arc of the circle is s = 7.74 inches

Given data ,

The formula for calculating the arc length of a circle is given by:

s = r * θ

where:

s = arc length

r = radius of the circle

θ = angle in radians

Given that the radius of the circle is 8.6 inches and the angle measure is 0.9 radians

s = 8.6 * 0.9

s ≈ 7.74

Hence , the arc length is s = 7.74 inches

To learn more about central angle click :

https://brainly.com/question/11877137

#SPJ1