If a nuclear reactor were to have a meltdown, radioactive materials could escape in the form of gases from the reactor into the atmosphere and harm humans and the environment. One safety system that might be able to prevent such an escape is a:

Answer:

H2

Explanation:

I would say H2 cause CH4 have less hydrogen gas .

At standard temperature and pressure conditions, both the balloons have equal grams of gas.

Standard temperature and pressure are defined as a standard set of conditions required for experimental measurements which are established to allow comparison between different sets of data.

Standards which are commonly used are those International Union of pure and applied chemistry and national institute of standards and technology.These are not universally accepted standards but are the ones which are commonly used.

Standard conditions of pressure and temperature are necessary to define standard reference conditions used to express volumes of liquids and gases.

These values are important to physicists, chemists ,engineers ,pilots and navigators.

Learn more about standard temperature and pressure,here:

https://brainly.com/question/29129606

#SPJ2

Answer:

C. throat

Explanation:

Answer:  0.548 mol

Explanation:

The carbonyl compound with the lowest Keq for the reaction with HCN to produce a cyanohydrin is H₂CO (formaldehyde)

The equilibrium constant (Keq) for the reaction of a carbonyl compound with HCN to produce a cyanohydrin depends on the stability of the resulting cyanohydrin. Generally, more stable cyanohydrins will have higher Keq values.

In this case, we can compare the stability of the cyanohydrins formed from each of the given carbonyl compounds to determine which one has the lowest Keq.

Among the given options:

Cyclohexanone forms a stable cyanohydrin.

2-Methylcyclohexanone forms a cyanohydrin with an additional methyl group, which provides some steric hindrance but still relatively stable.

CH₃CHO (acetaldehyde) forms a cyanohydrin with a smaller alkyl group, making it more reactive but still reasonably stable.

H₂CO (formaldehyde) forms a cyanohydrin with the smallest alkyl group, making it the least stable among the options.

Therefore, the carbonyl compound with the lowest Keq for the reaction with HCN to produce a cyanohydrin is H₂CO (formaldehyde).

To know more about carbonyl compound

https://brainly.com/question/13564853

#SPJ11

The decomposition reaction is 2[tex]H_{2}O_{2}[/tex] → 2[tex]H_{2}[/tex]O + [tex]O_{2}[/tex]

Hence, the correct option is B.

In this reaction, hydrogen peroxide ([tex]H_{2}O_{2}[/tex] ) decomposes into water ([tex]H_{2}[/tex]O

) and oxygen gas ( [tex]O_{2}[/tex]). Hydrogen peroxide is a compound composed of hydrogen and oxygen. Through a decomposition reaction, the hydrogen peroxide molecules split apart, resulting in the formation of water and oxygen.

The balanced equation indicates that for every two molecules of hydrogen peroxide, two molecules of water and one molecule of oxygen gas are produced. This reaction is an example of a decomposition reaction because a single compound (hydrogen peroxide) breaks down into multiple simpler substances (water and oxygen gas).

The decomposition reaction is 2[tex]H_{2}O_{2}[/tex]  → 2[tex]H_{2}[/tex]O + [tex]O_{2}[/tex]

Hence, the correct option is B.

To know more about decomposition reaction here

https://brainly.com/question/14024847

#SPJ4

Answer: 15 grams of salt are there in 5 L of solution.

Explanation:

Concentration of a solution is defined as the number of grams of solute dissolved per liter of the solution.

Given : Concentration of solution : 3 g/L

1 Liter of solution contains = 3 gram of salt

Thus 5 L of solution contains = [tex]\frac{3g}{1L}\times 5L=15g[/tex]

Thus 15 grams of salt are there in 5 L of solution.

The nucleus of an atom is small compared to the size of the atom because of Rutherford's nuclear theory. Rutherford's nuclear theory states that most of the mass of an atom and all of its positive charge are contained in a small core called the nucleus.

This statement is consistent with the fact that the nucleus of an atom is small compared to the size of the atom. Rutherford's nuclear theory states that the nucleus of an atom is small compared to the size of the atom, and, therefore, the nucleus has a relatively low mass compared to the mass of an atom.

Rutherford's nuclear theory states that the nucleus is small but contains about half of the mass of an atom. The nuclear theory was discovered by Ernest Rutherford in 1911.

You can learn more about the nucleus at: brainly.com/question/23366064

#SPJ11

Answer:

11.3m/s

Explanation:

Answer: 120 g

Explanation:

Answer:

50?

I think but not 100% sure if not lmk

when 5.20 × 10⁻³ moles of N₂O₅ gas completely reacts, 2.60 × 10⁻³ mol of NO₂ gas is formed.

What is Moles?

A mole is a unit of measurement of the quantity of a substance in the International System of Units. It is defined as exactly 6.02214076×10²³ particles, which can be atoms, molecules, ions or electrons.

To calculate the quantity of moles of NO₂ gas formed, we need to use the stoichiometric coefficients from the balanced reaction.

The balanced equation is:

2 N₂O₅(g) → 4 NO₂(g) + O₂(g)

According to the balanced equation, for every 2 moles of N₂O₅ that react, 4 moles of NO₂ are produced.

So, we can set up a ratio:

2 moles of N₂O₅ : 4 moles of NO₂

Now, we can use this ratio to calculate the moles of NO₂ gas formed when 5.20 × 10⁻³ mol of N₂O₅ gas reacts.

Given: Moles of N₂O₅ = 5.20 × 10⁻³ mol

Using the ratio:

4 moles of NO₂

------------------- = x moles of NO₂

2 moles of N₂O₅

x = (4/2) × (5.20 × 10⁻³) = 2.60 × 10⁻³ mol

Therefore, when 5.20 × 10⁻³ mol of N₂O₅ gas completely reacts, 2.60 × 10⁻³ mol of NO₂ gas is formed.

To learn more about Moles from the given link

https://brainly.com/question/30214618

#SPJ4

The aluminum chloride solution will be yellow in the presence of the indicator chlorophenol red due to acidic salt. Thus, option B is correct.

To determine the solutions, which will turn yellow color mainly in the presence of indicator chlorophenol red. So we need to consider the chemical properties of that compound and their effects on the indicator.

Aluminum chloride consists of acidic salt which hydrolyzes the presence of water to produce acidic conditions which further turns the indicator turns yellow. This color change of the indicator is due to the pH value of the solution. The acidic conditions will turn this indicator to yellow color.

To learn more about Aluminum chloride

https://brainly.com/question/21135358

#SPJ4

Answer:

0.013MB

Explanation:

Answer: The red on is attracted to The north pole

Explanation:

Answer:

Explanation:

Remember, matter can neither be created nor destroyed, so every atom of reactant the leftt side of the equation must be accounted for in the products on the right side of the equation. With  magnesium and hydrochloric acid we have:  Mg  +  2HCl   →  MgCl2  +  H2(g).  Magnesium is divalent, and so requires two chloride ions to form magnesium chloride.  Hydrogen gas is a diatomic molecule, so the reaction requires the product to be H2.  Going across the equation from left to right we have 1 atom of magnesium (accounted for on the right side of the equation), and on the left, 2 moles of hydrochloric acid; the two hydrogens represented on the left of the equation are accounted for on the right of the equation.  Likewise, the two chloride anions on the left of the equation are accounted for in the formation of MgCl2 on the right. When all the atoms are accounted for on both sides of the equation, we say the equation is "balanced".

The diameter of the capillary tube is approximately 8.12 micrometers.

To find the diameter of the capillary tube, we can use the relationship between the height of the liquid column in a capillary tube and the surface tension.

The formula for the height of the liquid column in a capillary tube is given by:

h = (2 × T) / (ρ × g × r)

where:

h is the height of the liquid column,

T is the surface tension of the liquid,

ρ is the density of the liquid,

g is the acceleration due to gravity, and

r is the radius of the capillary tube.

In this case, we are given:

h = 8.4 cm = 0.084 m (converted to meters),

T = 0.07199 kg/s²,

ρ = 1.0 g/cm³ = 1000 kg/m³ (converted to kg/m³), and

g = 9.8 m/s².

We can rearrange the formula to solve for the radius of the capillary tube:

r = (2 × T) / (ρ × g × h)

Substituting the given values:

r = (2 × 0.07199 kg/s²) / (1000 kg/m³ × 9.8 m/s² × 0.084 m)

Calculating this expression gives us:

r ≈ 4.06 x 10⁻⁶ m

Finally, we can find the diameter of the capillary tube by doubling the radius:

diameter = 2 × r = 2 × 4.06 x 10⁻⁶ m = 8.12 x 10⁻⁶ m

Therefore, the diameter of the capillary tube is approximately 8.12 micrometers.

Learn more about capillary tube from the link given below.

https://brainly.com/question/30097496

#SPJ4

Answer: When an inert gas is added to the system in equilibrium at constant pressure, then the total volume will increase.

Explanation:

Answer:

B

Explanation:

It is important to stretch your muslces as a warm up prior to any exercise.

Answer:

B

Explanation:

Hypoxic areas, such as those found in the Gulf of Mexico, develop primarily due to option C: die-off from a large phytoplankton bloom uses up the oxygen in water. The correct option is C.

Phytoplankton blooms occur when there is an excessive growth of microscopic algae in the water, often caused by high nutrient levels, such as nitrogen and phosphorus.

These blooms can create dense layers of algae on the water surface. As the algae die and decompose, bacteria consume the organic matter and consume oxygen in the process, leading to a decrease in oxygen levels in the water.

This process is known as eutrophication, and it can deplete oxygen concentrations to a critical level, resulting in hypoxic conditions.

Oxygen levels below 5ppm (option A) can contribute to hypoxia, but the primary cause is the consumption of oxygen by the decomposition of organic matter from the phytoplankton bloom (option C).

Nitrate additions (option B) and the presence of methyl-mercury (option D) can have additional negative impacts on aquatic ecosystems, but they are not the main drivers of hypoxia in this context. The correct option is C.

To know more about Hypoxia, refer here:

https://brainly.com/question/14570337#

#SPJ11

The sample that has the largest number of atoms is 1g of Chlorine(Cl). That is option C.

To calculate the sample with the largest number of atoms, the various number of atoms of each sample should be determined.

That is;

For sample A;

Na = 23 g

But 1g of Na= 6.022×10²³

23g of Na= 6.022×23 = 1.39×10²¹

For sample B;

Li = 7g

But 1 g of Na = 6.022×10²³

7 g of Na = 7× 6.022×10²³

= 4.22×10²⁴

For sample C;

Cl2= 71

But 1 g of Cl = 6.022×10²³

71g of Cl = 71×6.022×10²³

= 4.28 × 10²⁵

For sample D;

Au = 197

But 1g of Au = 6.022×10²³

197g = 197×6.022 × 10²³

= 1.186 × 10²⁶

Learn more about atoms here:

https://brainly.com/question/30401485

#SPJ4

Complete question:

Which one of the following will have greatest number of atoms?

A.) 1g Na

B.) 1g Li

C.) 1g Cl2

D.) 1g Au

Mendeleev arranged the elements in the periodic table on the basis of atomic masses and stated the behavior of the elements in a periodic law. The periodic law is when elements arranged by the atomic masses they exhibit the presence of similar properties. Mendeleev focused on the chemical properties of the elements and Meyer focused on the physical properties of the elements. The change in the periodic table is that the elements are now arranged in the order of their atomic numbers instead of their atomic masses.

Answer:

1.67 × 10^9

Explanation:

To determine the number of moles of beryllium (Be) in a thin-foil window weighing 3.24 g, we can use the molar mass of beryllium to convert grams to moles. The correct answer is option O) 0.360 mol.

The molar mass of beryllium (Be) is approximately 9.01 g/mol. To calculate the number of moles, we divide the given mass (3.24 g) by the molar mass of beryllium:

Number of moles = Mass of substance / Molar mass

Number of moles = 3.24 g / 9.01 g/mol ≈ 0.3596 mol

Rounding to the appropriate number of significant figures, the number of moles of beryllium in the thin-foil window is approximately 0.360 mol, which corresponds to option O) 0.360 mol.

Note: It's important to pay attention to the significant figures in the given mass (3.24 g) and round the answer accordingly. In this case, the answer is rounded to three significant figures since the given mass has three significant figures.

Learn more about moles here: https://brainly.com/question/29367909

#SPJ11

Answer:

heat flows from the object that has more thermal more energy to the object with less thermal energy