The distance traveled in the x-direction in the time found in part two is given by:50.5m
1. Find the time the cannonball is in the air when thrown straight upwards.
2. Find the x-component of the velocity.
3. Determine how far the cannonball will travel using the x-component of the velocity and the time found in part one.
When the cannonball is thrown straight upwards, it will eventually come to a stop and then fall back down. To find how long it's in the air, we can use the following equation:
time = (initial_velocity_y) / g
where g is the acceleration due to gravity (approximately 9.81 m/s²).
Using the y-component of velocity found in part one, plug it into the equation to find the time.
where t is the time, vy is the y-component of the velocity and g is the acceleration due to gravity, which is 9.81 m/s2.
Therefore, t = 32.2/9.81 = 3.27 s
The x-component of the velocity is the same as the given initial velocity, 15.5 m/s. Therefore, the distance traveled in the x-direction in the time found in part two is given by:
d = vx * t
where d is the distance and vx is the x-component of the velocity.
Therefore, d = 15.5 * 3.27 = 50.5 m
learn more about velocity Refer: https://brainly.com/question/30559316
#SPJ11
Finally, write down the theoretical form for the spring potential energy. How could we plot the spring potential energy (as determined from the answer to problem 2) as a function of position to easily show that this theoretical form holds? Will a plot of spring potential energy versus position be linear? How could we adjust position or spring potential energy to make this plot linear? What would be the slope of this plot? (The section "Using Linear Relationships to Make Graphs Clear" in the appendix "A Review of Graphs" will help you answer this question.)
The slope of the plot of spring potential energy versus the square of the displacement would be equal to the spring constant divided by 2 x (k/2).
The theoretical form for the spring potential energy is given by:
[tex]U = 1/2 * k * x^2[/tex]
Here U is the spring potential energy, k is the spring constant, and x is the displacement from the equilibrium position.
To plot the spring potential energy as a function of position, we would need to first calculate the spring constant k and then plug in values of x to the above equation to get the corresponding values of U. The plot of spring potential energy versus position would not be linear. It would be a parabolic curve, because the spring potential energy depends on the square of the displacement.
To make the plot linear, we could plot the spring potential energy versus the square of the displacement (i.e., U versus x^2). This would give us a straight line with slope equal to k/2. The y-intercept would be zero because U is zero at the equilibrium position.
To adjust position or spring potential energy to make this plot linear, we would need to take measurements of displacement and corresponding spring potential energy and then plot U versus x^2. We could then use a linear regression analysis to determine the slope of the line.
Learn more about potential energy visit: brainly.com/question/21175118
#SPJ4
Correct Question:
Finally, write down the theoretical form for the spring potential energy. How could we plot the spring potential energy (as determined from the answer to problem 2) as a function of position to easily show that this theoretical form holds? Will a plot of spring potential energy versus position be linear? How could we adjust position or spring potential energy to make this plot linear? What would be the slope of this plot? (The section "Using Linear Relationships to Make Graphs Clear" in the appendix "A Review of Graphs" will help you answer this question.)
The tank has an electrical heating element which runs from the mains supply and heats the
water. The tank contains 0.15 m³ of water and water has a density of 1000 kg/m³. The water is
to be heated from 15°C to 50°C and has a specific heat capacity of 4200 J/kg°C.
al Calculate the mass of water in the tank.
Answer:150g
Explanation:
a) you can use formula: m=D.V
with: D= 1000kg/m³ and V=0,15m³
a piano string having a mass per unit length equal to 5.20 10-3 kg/m is under a tension of 1 200 n. find the speed with which a wave travels on this string.
The speed with which a wave travels on the piano string is 153.4 m/s.
To find the speed of a wave on a string, we can use the formula v = √(T/μ), where v is the wave speed, T is the tension in the string, and μ is the mass per unit length. Given that the mass per unit length (μ) is 5.20 x 10^-3 kg/m and the tension (T) is 1200 N, we can plug these values into the formula:
1. Calculate the square root of the tension (T) divided by the mass per unit length (μ): √(1200 N / 5.20 x 10^-3 kg/m)
2. Solve the equation: √(1200 / 5.20 x 10^-3) ≈ √(230769.23) ≈ 153.4
Therefore, the speed with which a wave travels on the piano string is approximately 153.4 m/s.
Learn more about wave here:
https://brainly.com/question/25954805
#SPJ11
The work W0 is required to accelerate a carfrom rest to the speed v0.
(a) How much work (in terms of W0) is required to accelerate the car from rest to the speed v0/2?
______W0
(b) How much work is required to accelerate the car fromv0/2 to v0? _______W0
Okay, here are the steps to solve this problem:
(a) To accelerate the car from rest to v0/2, the required work is proportional to the square of the final velocity.
So W = k*v^2 (where k is some constant)
Setting v = v0/2, the work required is:
W = k*(v0/2)^2 = k*v0^2 / 4
Therefore, the work required is W0/4
(b) To accelerate the car from v0/2 to v0, the required work is:
W = k*v^2 (where v starts at v0/2)
Setting v = v0, the work required is:
W = k*(v0/2)^2 * 2 = k*v0^2 / 2 = W0/2
Therefore,
(a) W0/4
(b) W0/2
Does this make sense? Let me know if you have any other questions!
. Explain the concept of generational wealth. In How Jews Became White and What That
Says About America, how did the GI Bill described in the essay impact the generational
wealth for the men who served, marginalized populations, and women. Support your
response with two paragraphs.
Suppose you have a 9.00-V battery, a 2.6-μF capacitor, and a 7.85-μF
capacitor.
(A) Find the total charge stored in the system if the capacitors are connected to the battery in series in C
.
(B) Find the energy stored in the system if the capacitors are connected to the battery in series in J
.
(C) Find the charge if the capacitors are connected to the battery in parallel in C
.
(D) Find the energy stored if the capacitors are connected to the battery in parallel in J
.
you have a 9.00-V battery, a 2.6-μF capacitor, and a 7.85-μF capacitor. In series, A) Total charge stored = 1.76 * 10⁻⁵ C; B) Energy stored= 7.9 * 10⁻⁵ J; In parallel, C) Total charge stored= 94.05 * 10⁻⁶ C; D) Energy stored= 4.23 * 10⁻⁴ J
Given V= 9V
C1 = 2.6 μF
C2 = 7.85 μF
If capacitors are connected in series:
then, Ceq = (C1 * C2)/ C1+ C2 = (2.6 * 7.85)/ (2.6 + 7.85) = 1.953 μF
A) Q = CV = 1.953 μF * 9V = 17.578 μC = 1.76 * 10⁻⁵ C
B) Energy stored = U = 1/2 CV²
or, U= 1/2 (1.953 * 10⁻⁶ F) * (9V)² = 7.9 * 10⁻⁵ J
If capacitors are conncted in parallel,
Ceq = C1+ C2 = (2.6 + 7.85) μF = 10.45 μF
C) Here, Q= CV = 10.45 μF * 9V = 94.05 * 10⁻⁶ C
D) Energy stored = U = 1/2 CV²
or, U= 1/2 (10.45* 10⁻⁶ ) (9)² = 4.23 * 10⁻⁴ J
To know more about capacitors here:
https://brainly.com/question/17176550#
#SPJ11
What are the comfort-related properties of indoor air that climate sensors measure?(Select all the correct answer) I. CirculationII. FiltrationIII. HumidityIV. TemperatureV. Ventilation
The comfort-related properties of indoor air that climate sensors measure are III. Humidity, IV. Temperature, and V. Ventilation.
What's climate sensorsClimate sensors in indoor spaces measure various comfort-related properties to ensure a healthy and comfortable environment. These properties include:
Humidity: Indoor air humidity levels are measured by climate sensors to maintain a balanced environment, as excessive moisture or dryness can cause discomfort and impact health. Temperature: Temperature is a key factor in indoor comfort, so climate sensors monitor and regulate it to maintain a comfortable range for occupants. Ventilation: Proper ventilation ensures a continuous supply of fresh air while removing stale air. Climate sensors track the effectiveness of the ventilation system to provide a comfortable and healthy indoor environment..Learn more about indoor air at
https://brainly.com/question/17137739
#SPJ11
of the three stars you’ve observed (hip 87937, hip 108870, and tau cet), which one is more luminous? tau cet hip 87937 hip 108870 they have the same luminosity.
a.tau cet
b.hip 87937
c.hip 108870
d.they have the same luminosity
The requried, regardless of their individual properties or distances from Earth, all three stars have the same luminosity. Option D. is correct.
Luminosity refers to the total amount of energy emitted by a star per unit of time. It is a measure of the intrinsic brightness of a star, independent of its distance from us.
In the given scenario, we have three stars: tau cet, hip 87937, and hip 108870. The information states that these three stars have the same luminosity. This means that all three stars emit the same amount of energy per unit of time, making them equally bright.
Therefore, regardless of their individual properties or distances from Earth, all three stars have the same luminosity. This suggests that, in terms of brightness, there is no distinction among tau cet, hip 87937, and hip 108870.
Learn more about luminosity here:
https://brainly.com/question/13945214
#SPJ12
a beam of light strikes an air/water surface. water has an index of refraction of 1.33. the angle of incidence is 72.0 degrees. what is the angle of reflection?
The angle of reflection for the given scenario would be 72.0 degrees.
According to the law of reflection, the angle of incidence is equal to the angle of reflection. Therefore, the angle of reflection for the given scenario would also be 72.0 degrees. It is important to note that the angle of incidence is the angle between the incident beam of light and the normal to the surface, while the angle of reflection is the angle between the reflected beam of light and the normal to the surface. Additionally, the index of refraction of water affects the speed of light in water, but does not have a direct impact on the angles of incidence and reflection.
Overall, in this scenario, the angle of reflection would be the same as the angle of incidence, which is 72.0 degrees.
Learn more about reflection here:
https://brainly.com/question/30270479
#SPJ11
A ball is rolled with a speed u along the floor. The speed remains constant from point A to point B, after which the speed changes as the ball rolls along the curved surface from B to C, finally becoming a projectile at point C.
(a) Determine the required speed u as a function of g, R, and x so that the ball will land at point A.
(b) Determine the required speed u in ft/s if the curved surface has a radius of R= 3 ft and x= 8 ft.
(c) For R= 3 ft, what is the minimum horizontal distance, xmin, for which a person can play this game if the ball must remain in contact with the curved surface until reaching point C?
(a) [tex]u = sqrt(2gR(1 - cos(arctan(h/R))))[/tex]; (b) no solution; (c) the minimum horizontal distance [tex]xmin[/tex]for which a person can play this game if the ball must remain in contact with the curved surface until reaching point C is [tex]3/2 ft[/tex].
What do you understand by projectile motion?Projectile motion is the motion of an object through the air or space under the influence of gravity, where the only force acting on it is the initial impulse or thrust given to it at the time of launch.
(a) To determine the required speed u as a function of g, R, and x so that the ball will land at point A, we need to use conservation of energy. From A to B, the ball is rolling along a horizontal surface, so there is no change in potential energy. The kinetic energy of the ball at point B is equal to the potential energy of the ball at point C, when it becomes a projectile. Therefore, we have:
[tex]1/2 mu^2 = mg(2R)[/tex]
where m is the mass of the ball, g is the acceleration due to gravity, and 2R is the height difference between points B and C.
To find the speed required for the ball to land at point A, we need to determine the distance the ball will travel from point B to A. We can use the law of conservation of energy again, but this time we need to take into account the change in potential energy as the ball rolls down the curved surface from point B to C. The potential energy at point B is given by [tex]mgh[/tex], where h is the height of the curved surface at point B. The potential energy at point C is given by [tex]mg(2R)[/tex], as previously stated. Therefore, we have:
[tex]1/2 mu^2 + mgh = mg(2R)[/tex]
Solving for u, we get:
[tex]u = sqrt(2gR(1 - cos(theta)))[/tex]
where theta is the angle between the horizontal surface and the curved surface at point B. We can find theta using trigonometry:
[tex]tan(theta) = h/R[/tex]
Therefore, we have:
[tex]theta = arctan(h/R)[/tex]
Substituting this into our equation for u, we get:
[tex]u = sqrt(2gR(1 - cos(arctan(h/R))))[/tex]
(b) To determine the required speed u in [tex]ft/s[/tex]if the curved surface has a radius of [tex]R= 3 ft[/tex] and[tex]x= 8 ft[/tex], we need to find the height h of the curved surface at point B. We can use the Pythagorean theorem to find h:
[tex]h^2 + x^2 = R^2[/tex]
[tex]h^2 + 8^2 = 3^2[/tex]
[tex]h^2 = 9 - 64[/tex]
[tex]h^2 = -55[/tex]
Since h is negative, this means that the ball cannot land at point A. Therefore, there is no solution for part (b).
(c) For [tex]R= 3 ft[/tex], to find the minimum horizontal distance [tex]xmin[/tex] for which a person can play this game if the ball must remain in contact with the curved surface until reaching point C, we need to find the minimum value of x such that the ball reaches point C without losing contact with the surface. This occurs when the normal force acting on the ball is zero, which happens when the centripetal force required to keep the ball on the curved surface is equal to the weight of the ball.
The centripetal force is given by:
[tex]Fc = mv^2/R[/tex]
The weight of the ball is mg. Setting these equal and solving for v, we get:
[tex]v = sqrt(gR)[/tex]
Substituting into the equation for the velocity at point C, we get:
[tex]muR = mv(R+x) = mgR(R+x)/sqrt(gR) = sqrt(gR^3)(R+x)[/tex]
Solving for x, we get:
[tex]x = (muR/sqrt(gR^3)) - R[/tex]
Substituting[tex]R = 3 ft[/tex] and simplifying, we get:
[tex]x = (u/3sqrt(g))(u^2/9g - 1)[/tex]
To find the minimum value of x, we can take the derivative of x with respect to u and set it equal to zero:
[tex]dx/du = (2u/27g)(u^2/9g - 3) = 0[/tex]
Solving for u, we get:
[tex]u = sqrt(27g/9) = 3sqrt(3) ft/s[/tex]
Substituting this value of u into the equation for x, we get:
[tex]x = 3/2 ft[/tex]
Therefore, the minimum horizontal distance [tex]xmin[/tex] for which a person can play this game if the ball must remain in contact with the curved surface until reaching point C is[tex]3/2 ft.[/tex]
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ1
how far from an 8.00 µc point charge will the potential be 300 v? m at what distance will it be 6.00 ✕ 102 v? m
The potential will be 6.00 x[tex]10^2[/tex] V at a distance of 1.20 x [tex]10^4[/tex] meters from the 8.00 µC point charge.
We can use the formula for electric potential due to a point charge:
V = k * q / r
where V is the potential, k is Coulomb's constant (9.0 x [tex]10^9[/tex] N·m²/C²), q is the charge, and r is the distance from the charge.
For the first part of the question:
300 = 9.0 x [tex]10^9 *[/tex] 8.00 x[tex]10^-6[/tex] / r
r = 9.0 x [tex]10^9[/tex] * 8.00 x [tex]10^-6[/tex] / 300 = 240 m
Therefore, the potential will be 300 V at a distance of 240 meters from the 8.00 µC point charge.
For the second part of the question:
6.00 x 10² = 9.0 x [tex]10^9[/tex] * 8.00 x 10⁻⁶ / r
r = 9.0 x 10⁹ * 8.00 x [tex]10^-6[/tex]/ (6.00 x 10²) = 1.20 x [tex]10^4[/tex]m
Therefore, the potential will be 6.00 x[tex]10^2[/tex] V at a distance of 1.20 x [tex]10^4[/tex]meters from the 8.00 µC point charge.
Learn more about potential ,
https://brainly.com/question/4305583
#SPJ4
if the rotation rate of a generator coil is doubled, what happens to the peak emf?
When the rotation rate of a generator coil is doubled, the peak emf (electromotive force) will also double. This is due to the fact that the emf produced by the coil is directly proportional to the rate of change of magnetic flux through the coil.
When the coil rotates faster, the rate of change of magnetic flux through the coil also increases. This in turn leads to a higher emf being produced. The peak emf refers to the maximum voltage that is generated by the coil during one cycle. Doubling the rotation rate of the coil will therefore result in a corresponding increase in the peak emf.
It is important to note that the peak emf is not the same as the average emf, which is the total emf produced over one complete cycle divided by the time taken for that cycle. The peak emf is a measure of the maximum voltage generated by the coil, while the average emf is a measure of the overall voltage produced.
In summary, doubling the rotation rate of a generator coil will result in a doubling of the peak emf produced by the coil. This is due to the direct relationship between the rate of change of magnetic flux and the emf generated.
For more such questions on Peak EMF.
https://brainly.com/question/15175713#
#SPJ11
When the rotation rate of a generator coil is doubled, the peak emf (electromotive force) will also double. This is due to the fact that the emf produced by the coil is directly proportional to the rate of change of magnetic flux through the coil.
When the coil rotates faster, the rate of change of magnetic flux through the coil also increases. This in turn leads to a higher emf being produced. The peak emf refers to the maximum voltage that is generated by the coil during one cycle. Doubling the rotation rate of the coil will therefore result in a corresponding increase in the peak emf.
It is important to note that the peak emf is not the same as the average emf, which is the total emf produced over one complete cycle divided by the time taken for that cycle. The peak emf is a measure of the maximum voltage generated by the coil, while the average emf is a measure of the overall voltage produced.
In summary, doubling the rotation rate of a generator coil will result in a doubling of the peak emf produced by the coil. This is due to the direct relationship between the rate of change of magnetic flux and the emf generated.
For more such questions on Peak EMF.
https://brainly.com/question/15175713#
#SPJ11
how long (in nsns ) does it take light to travel 1.30 mm in vacuum? express your answer with the appropriate units
b) What distance does light travel in water during the time that it travels 1.30m in vacuum? Express your answer with the appropriate units.
c)What distance does light travel in glass during the time that it travels 1.30m in vacuum?Express your answer with the appropriate units.
d)What distance does light travel in cubic zirconia during the time that it travels 1.30m in vacuum?Express your answer with the appropriate units.
a) It takes light approximately 4.33 ns to travel 1.30 mm in vacuum.
b) Light travels approximately 0.965 m in water during the time it travels 1.30 m in vacuum.
c) Light travels approximately 0.838 m in glass during the time it travels 1.30 m in vacuum.
d) Light travels approximately 0.663 m in cubic zirconia during the time it travels 1.30 m in vacuum.
a) To calculate the time, use the formula: time = distance / speed of light. In vacuum, the speed of light is approximately 299,792,458 m/s. So, time = (1.30 x 10^-3 m) / (299,792,458 m/s) ≈ 4.33 x 10^-9 s = 4.33 ns.
b) The refractive index of water is about 1.333. Speed of light in water = (speed of light in vacuum) / refractive index. Then, calculate the distance using the same formula as in (a).
c) The refractive index of glass is about 1.5. Repeat the same process as in (b) using the refractive index of glass.
d) The refractive index of cubic zirconia is about 2.15. Repeat the same process as in (b) using the refractive index of cubic zirconia.
To know more about speed of light click on below link:
https://brainly.com/question/1555553#
#SPJ11
A pendulum has a length of 4.74 m. Find its period. Theacceleration of gravity
is 9.8 m/s2. Answer in units of s. How long wouldthe pendulum have to be to
double the period? Answer in units of m.
The pendulum would need to be approximately 18.964 meters long to double its period.
To find the period of a pendulum, we can use the formula:
T = 2π√(L/g)
where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
Given that L = 4.74 m and g = 9.8 m/s², let's find the period T:
T = 2π√(4.74/9.8)
T ≈ 2π√(0.4837)
T ≈ 2π(0.6955)
T ≈ 4.372 s
So the period of the pendulum is approximately 4.372 seconds.
Now, to double the period, we have to find the new length L'. We can use the same formula but with the new period T':
T' = 2T
T' ≈ 2(4.372)
T' ≈ 8.744 s
Now, let's solve for L':
8.744 = 2π√(L'/9.8)
(8.744/2π)² = L'/9.8
1.932² = L'/9.8
L' ≈ 1.932² * 9.8
L' ≈ 18.964 m
To double the period, the pendulum would have to be approximately 18.964 meters long.
For more about pendulum:
https://brainly.com/question/29702798
#SPJ11
at its peak, a tornado is 68 m in diameter and has 230 km/h winds. What is its angular velocity in revolutions per second?
The 29/s is its angular velocity in revolutions per second.
What is velocity?
The most important metric for determining an object's position and rate of movement is its velocity. The distance that an object travels in a certain amount of time might be used to define it. The object's displacement in a unit of time is referred to as velocity.
What is speed ?
The rate of a directionally changing object's location. The SI unit of speed is created by combining the fundamental units of length and time. Meters per second (m/s) is the unit of speed in the metric system.
Therefore, The 29/s is its angular velocity in revolutions per second.
Learn more about velocity from the given link.
https://brainly.com/question/25749514
#SPJ1
The 29/s is its angular velocity in revolutions per second.
What is velocity?
The most important metric for determining an object's position and rate of movement is its velocity. The distance that an object travels in a certain amount of time might be used to define it. The object's displacement in a unit of time is referred to as velocity.
To find the angular velocity of the tornado at its peak in revolutions per second, we can use the formula:
ω = v/r
where ω is the angular velocity in radians per second, v is the velocity of the tornado, and r is the radius of the tornado.
First, we need to convert the diameter of the tornado to its radius:
r = d/2 = 68/2 = 34 meters
Next, we need to convert the velocity of the tornado from km/h to m/s:
v = 230 km/h = (2301000)/(6060) m/s = 63.89 m/s
Now we can plug in the values for v and r into the formula to find the angular velocity:
ω = v/r = 63.89/34 = 1.877 rad/s
Finally, we can convert the angular velocity from radians per second to revolutions per second by dividing by 2π:
ω_rps = ω/(2π) = 1.877/(2π) = 0.299 rev/s (approximately)
Therefore, the angular velocity of the tornado at its peak is approximately 0.299 revolutions per second.
Therefore, The 29/s is its angular velocity in revolutions per second.
Learn more about velocity from the given link.
brainly.com/question/25749514
#SPJ1
The crankshaft in a race car goes from rest to 3600
rpm
in 2.1
s
.
(A) What is the crankshaft's angular acceleration in rad/s
2
?
(B) How many revolutions does it make while reaching 3600
rpm
?
(A) 3600 rad/s^2 B) 42 revolutions.
(A) To find the angular acceleration of the crankshaft, we can use the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time
Converting the final angular velocity to radians per second:
[tex]3600 rpm = 3600/60 = 60[/tex] revolutions per second
2π radians = 1 revolution
So, [tex]3600 rpm = (3600/60) x 2π = 120π[/tex] radians per second
Initial angular velocity is 0, and time is 2.1 seconds, so:
angular acceleration = [tex](120π - 0) / 2.1 = 57.14π rad/s^2[/tex]
(B) To find the number of revolutions made by the crankshaft, we can use the formula:
number of revolutions = final angular velocity x time / 2π
Substituting the values we have:
final angular velocity = 120π radians per second
time = 2.1 seconds
number of revolutions = [tex](120π x 2.1) / 2π = 120[/tex] revolutions
Learn more about crankshaft rpm here:
https://brainly.com/question/8424566
#SPJ11
on a certain planets moon, the acceleration due to gravity is 2.2 m/sec. if a rock is dropped into a crevasse, how fast will it be going just before it hits bottom 31 sec later?
The rock will be going 68.2 m/s just before it hits the bottom of the crevasse 31 seconds later.
To solve this problem, we need to use the formula for the acceleration due to gravity:
a = g = 2.2 m/s²
We also know that the rock falls for a time of t = 31 seconds. Using the formula for the final velocity of an object undergoing constant acceleration:
v = u + at
where u is the initial velocity (in this case, 0 m/s), we can find the final velocity v just before the rock hits the bottom of the crevasse:
v = 0 + (2.2 m/s²) x (31 s) = 68.2 m/s
Therefore, the rock will be going 68.2 m/s
Learn more about velocity at https://brainly.com/question/24445340
#SPJ11
A stockroom worker pushes a box with a mass of 11.2 kg on a horizontal surface with a constant speed of 3.10 m/s. The coefficient of kinetic friction between the box and the surface is 0.18. What horizontal force must the worker apply to maintain the motion?
The worker must apply a horizontal force of approximately 19.78 N to maintain the motion of the box of mass 11.2 kg.
To find the horizontal force the worker must apply to maintain the motion of a box with a mass of 11.2 kg at a constant speed of 3.10 m/s, we need to consider the frictional force acting on the box.
Here are the steps to calculate the required force:
1. Calculate the gravitational force acting on the box: F_gravity = mass * g, where g = 9.81 m/s² (gravitational acceleration).
F_gravity = 11.2 kg * 9.81 m/s² = 109.872 N
2. Calculate the frictional force: F_friction = coefficient of kinetic friction * F_gravity
F_friction = 0.18 * 109.872 N = 19.77696 N
3. Since the box is moving at a constant speed, the applied force must be equal to the frictional force to maintain the motion.
F_applied = F_friction = 19.77696 N
So, the worker must apply a horizontal force of approximately 19.78 N to maintain the motion of the box.
For more information on mass, speed and force refer to https://brainly.in/question/23858054
#SPJ11
james uses 4 cups of soda and 16 cups of fruit juices to make a punch to represent the number of of soda is ,s, and for the number of fruit juice ,j, needed to make the same punch james wrote the equation s= J what number should be placed in the blank.
The number to be placed in the blank is 1/4.
No. of cups of soda, s = 4
No. of cups of fruit juices, j = 16
So,
The ratio of soda and juice can be given as,
s/j = 4/16
s/j = 1/4
Therefore,
s = j/4
s = (1/4)j
To learn more about proportions, click:
https://brainly.com/question/31548894
#SPJ1
The number to be placed in the blank is 1/4.
No. of cups of soda, s = 4
No. of cups of fruit juices, j = 16
So,
The ratio of soda and juice can be given as,
s/j = 4/16
s/j = 1/4
Therefore,
s = j/4
s = (1/4)j
To learn more about proportions, click:
https://brainly.com/question/31548894
#SPJ1
A particle moves according to a law of motion s = f(t) = t^3 - 15t^2 + 72t, t=0, where t is measured in seconds and s in feet. Find the velocity at time t. v(t) = ____ ft/s
The velocity as a function of time is v(t) = 3t² - 30t + 72 ft/s
The velocity at time t, v(t), is the first derivative of the position function s(t) = t³ - 15t² + 72t.
To find v(t), differentiate s(t) with respect to t:
v(t) = ds/dt = 3t² - 30t + 72 ft/s
The velocity of the particle at time t is v(t) = 3t² - 30t + 72 ft/s.
To explain further, the position function s(t) represents the position of the particle at any given time t.
To find the velocity, we need to determine the rate of change of position with respect to time, which is given by the derivative of the position function.
By applying the power rule for differentiation, we find the derivative, which represents the velocity of the particle as a function of time. The velocity function v(t) is thus 3t² - 30t + 72 ft/s.
To know more about derivative click on below link:
https://brainly.com/question/25324584#
#SPJ11
a bicycle wheel has a radius r = 0.22 m and rotates at a constant frequency of f = 93 rev/min. Part (a) Calculate the period of rotation of the wheel T in seconds. Part (b) What is the tangential speed of a point on the wheel's outer edge in ms?
The wheel rotates once every 0.645 seconds and A point on the outside of the wheel is moving at a tangential speed of 2.14 m/s.
How can I determine the angular frequency?2/T is the equation for angular frequency. The radians per second are used to measure angular frequency. The periodicity, f = 1/T, is the period's inverse. The motion's frequency, f = 1/T = /2, defines the number of complete oscillations that take place in a given period of time.
T = 1/f
T = 1/93 min/rev × 60 s/min = 0.645 s
v = rω
where r is the radius of the wheel, and ω is the angular velocity of the wheel in radians per second.
To find ω, we first convert the frequency f to radians per second using the formula:
ω = 2πf
ω = 2π × 93 rev/min × 1 min/60 s = 9.74 rad/s
Now, substituting the values of r and ω, we get:
v = 0.22 m × 9.74 rad/s = 2.14 m/s
To know more about speed visit:-
https://brainly.com/question/28224010
#SPJ1
Calculate the power per square meter (in kW/m2) reaching Earth's upper atmosphere from the Sun. (Take the power output of the Sun to be 4.00 ✕ 1026 W.)
The power from the sun reaching Earth's upper atmosphere is 1.42 x 10³ kW/m².
To calculate the power per square meter reaching Earth's upper atmosphere from the Sun, we need to use the inverse square law.
The power output of the Sun is given as 4.00 x 10²⁶ W.
The distance between the Sun and the Earth varies throughout the year, but on average, it is about 149.6 million kilometers (9.3 x 10⁷ miles).
Using the formula for the surface area of a sphere, we can find the total surface area of the imaginary sphere with a radius equal to the distance between the Sun and the Earth.
The surface area of a sphere = 4πr²
The surface area of the sphere with a radius of 149.6 million km:
A = 4 x 3.1416 x (149.6 x 10⁹)²
A = 2.827 x 10²³ m²
Now, we can calculate the power per square meter reaching Earth's upper atmosphere by dividing the total power output of the Sun by the total surface area of the sphere.
Power per square meter = Power output of the Sun / Total surface area of the sphere
= (4.00 x 10²⁶ W) / (2.827 x 10²³ m²)
= 1.42 x 10³ kW/m²
Therefore, the power per square meter reaching Earth's upper atmosphere from the Sun is 1.42 x 10³ kW/m².
Learn more about inverse square law:
https://brainly.com/question/30404562
#SPJ11
Consider a mass m hanging from a linear springwith stiffness constant k from a ceiling in a house. IfA is the extension of the spring from its unstretchedlength en zo is the extension at equilibrium, thenthe expressionmg - kA = m.Ï = mg - kr - kroholds for any extension x from equilibrium. It thenfollows that mï + kr = 0 because(A) at the equilibrium state the weight and thespring force are in equilibrium.(B) kx + kxo = 0.(C) the velocity is constant.(D) the spring is in equilibrium.(E) at the equilibrium state the mass is in equilib-rium.
The correct answer is (A) at the equilibrium state, the weight and the spring force are in equilibrium.
Here's a step-by-step explanation:
1. When the mass m is hanging from the spring, it causes an extension A from the unstretched length. At this point, the spring force (kA) and gravitational force (mg) are acting on the mass.
2. The extension at equilibrium is denoted as xo.
The given expression is mg - kA = m.Ï = mg - kr - kro.
3. At the equilibrium state, the forces acting on the mass (spring force and gravitational force) are balanced.
This means that the weight (mg) equals the spring force (kxo).
4. Therefore, the mass is in equilibrium at this point, and mï + kr = 0 holds true.
Remember, "mass" refers to the object's mass (m), "equilibrium" is the state where forces are balanced, and "velocity" is the rate of change of position with respect to time (though in this case, velocity does not affect the answer).
For more information on equilibrium, mass and velocity refer to https://brainly.com/question/30366525
#SPJ11
calculate the magentic flux through the coil in each case. the magnetic field is 2.0 tesla, and the area of the face of the coil is 0.25 m2
The magnetic flux through the coil is 0.5 Weber when the coil is perpendicular to the magnetic field and 0 Weber when parallel.
Magnetic flux is the product of the magnetic field and the area perpendicular to it. When the coil is perpendicular to the magnetic field, the maximum amount of magnetic flux passes through it, which is equal to the product of the magnetic field and the area of the face of the coil:
[tex]Φ = B x A = 2.0 T x 0.25 m² = 0.5[/tex] Weber.
When the coil is parallel to the magnetic field, the magnetic flux passing through it is zero because the area of the face of the coil is parallel to the magnetic field, and hence, the component of the magnetic field perpendicular to the coil is zero.
Learn more about magnetic field here:
https://brainly.com/question/20431008
#SPJ11
You are in your car driving on a highway at 25 m/s when you glance in the passenger-side mirror (a convex mirror with radius of curvature 150 cm ) and notice a truck approaching. If the image of the truck is approaching the vertex of the mirror at a speed of 1.5 m/s when the truck is 2.0 m away, what is the speed of the truck relative to the highway? Express your answer in meters per second to two significant figures.
Speed is a measurement of how quickly an object's distance travelled changes. Speed is a scalar, which implies it has magnitude but no direction as a unit of measurement.
Thus, 1 / f =1 / s + 1 / s' -1 / 0.75 m
= 1 / 2 m + 1 / s' s'
= -0.54 m t
= -0.54 m / -1.9 m /s [ (V - 25) m / s ] t
= 2 m
The item was moving, changing speed as it went. This indicates that the object's speed is constantly changing rather than remaining constant throughout the entire journey.
When a moving object's speed changes over time, the average speed is computed as the total of all instantaneous speeds divided by the total number of different speeds.
Thus, Speed is a measurement of how quickly an object's distance travelled changes. Speed is a scalar, which implies it has magnitude but no direction as a unit of measurement.
Learn more about Speed, refer to the link:
https://brainly.com/question/17661499
#SPJ12
A galvanometer needle deflects full scale for a 53.0-μA current. What current will give full-scale deflection if the magnetic field weakens to 0.840 of its original value?
When the magnetic field weakens to 0.840 of its original value, a current of approximately 44.5 μA is needed to give full-scale deflection in the galvanometer.
To answer this question, we need to use the formula for the current (I) that produces a deflection in a galvanometer, which is given by:
I = kθ/B
Where k is sensitivity of the galvanometer, θ is deflection angle, and B is magnetic field strength.
In this case, we are given that the galvanometer needle deflects full scale for a 53.0-μA current, which means that:
[tex]I1 = 53.0 μA[/tex]
We are also told that the magnetic field weakens to 0.840 of its original value, which means that:
B2 = 0.840B1
To find the current that will give full-scale deflection with this weaker magnetic field, we can rearrange the formula as follows:
I2 = (B2/B1) (I1)
Substitute:
[tex]I2 = (0.840B1/B1) (53.0 μA)\\I2 = 44.5 μA[/tex]
Therefore, the current that will give full-scale deflection with the weaker magnetic field is 44.5 μA.
Learn more about galvanometer here:
https://brainly.com/question/17247518
#SPJ11
When the magnetic field weakens to 0.840 of its original value, a current of approximately 44.5 μA is needed to give full-scale deflection in the galvanometer.
To answer this question, we need to use the formula for the current (I) that produces a deflection in a galvanometer, which is given by:
I = kθ/B
Where k is sensitivity of the galvanometer, θ is deflection angle, and B is magnetic field strength.
In this case, we are given that the galvanometer needle deflects full scale for a 53.0-μA current, which means that:
[tex]I1 = 53.0 μA[/tex]
We are also told that the magnetic field weakens to 0.840 of its original value, which means that:
B2 = 0.840B1
To find the current that will give full-scale deflection with this weaker magnetic field, we can rearrange the formula as follows:
I2 = (B2/B1) (I1)
Substitute:
[tex]I2 = (0.840B1/B1) (53.0 μA)\\I2 = 44.5 μA[/tex]
Therefore, the current that will give full-scale deflection with the weaker magnetic field is 44.5 μA.
Learn more about galvanometer here:
https://brainly.com/question/17247518
#SPJ11
A 60.0−kg person running at an initial speed of 4.00 m/s jumps onto a 120−kg cart initially at rest (Fig. P9.69). The person slides on the carts top surface and finally comes to rest relative to the cart. The coefficient of kinetic friction between the person and the cart is 0.400. Friction between the cart and ground can be ignored.How long does the friction force act on the person?
As a result, the individual is subject to the friction force for 0.765 seconds. Utilizing the work-energy concept and the conservation of momentum, we can find a solution to this issue.
First, we may calculate the total ultimate velocity of the passenger and the cart using the conservation of momentum. The overall momentum is preserved since there are no outside forces operating horizontally on the person-cart system.
[tex]m_p* v_p,i + m_c * v_c,i = (m_p + m_c) * v_f\\(60.0 kg)(4.00 m/s) + (120 kg)(0) = (60.0 kg + 120 kg) * v_f\\v_f = 2.00 m/s[/tex]
Next, we can use the work-energy principle to find the distance that the person slides on the cart before coming to rest. The work done by the friction force is equal to the change in kinetic energy of the person-cart system:
[tex]W_friction = \alpha (K)[/tex]
where W_friction is the work done by the friction force and ΔK is the change in kinetic energy of the person-cart system. The change in kinetic energy is:
[tex]K = (1/2) (m_p+ m_c) - (1/2) m_p * v_p*i^2[/tex]
Substituting the given values, we get:
[tex]K = (1/2) (60.0 kg + 120 kg) (2.00 m/s)^2 - (1/2) (60.0 kg) (4.00 m/s)^2\\K = -720 J[/tex]
The negative sign indicates that the kinetic energy of the person-cart system decreases as a result of the friction force.
The work done by the friction force is:
[tex]W_friction = f_k * d[/tex]
where f_k is the kinetic friction force and d is the distance that the person slides on the cart. The kinetic friction force is:
[tex]f_k = u_k * m_p * g[/tex]
where μ_k is the coefficient of kinetic friction, m_person is the mass of the person, and g is the acceleration due to gravity. Substituting the given values, we get:
[tex]f_k = (0.400) (60.0 kg) (9.81 m/s^2) =[/tex] 235.4 N
Substituting the values of ΔK and f_k, we get:
235.4 N * d = -720 J
d = -720 J / (235.4 N) = -3.06 m
The negative sign indicates that the displacement of the person is in the opposite direction of the friction force, which is expected since the person slides backward relative to the cart.
Finally, we can find the time that the friction force acts on the person by dividing the distance by the initial velocity of the person:
t = d / [tex]v_p,[/tex]
i = -3.06 m / 4.00 m/s = -0.765 s
t = 0.765 s
Learn more about friction force visit: brainly.com/question/23161460
#SPJ4
Over the past several years and until recently, the United States has had lower unemployment rates than most European countries.
True
False
True. Over the past several years and until recently, the United States has indeed had lower unemployment rates than most European countries.
According to data from the Organization for Economic Co-operation and Development (OECD), the United States had an unemployment rate of 3.7% in 2019, while the average unemployment rate for OECD countries was 5.7%. This trend has remained consistent over the past several years, with the US unemployment rate consistently lower than the average for OECD countries since the early 2000s. In 2020, the US unemployment rate increased to 14.7%, but even this rate is still lower than the OECD average of 7.9%.
To learn more about unemployment rate click here https://brainly.com/question/30115084
#SPJ11
a light beam has a wavelength of 340 nm in a material of refractive index 2.00.
When a light beam travels through a material with a refractive index different from that of vacuum or air, its wavelength and speed are altered. The refractive index of a material is the ratio of the speed of light in vacuum or air to the speed of light in that material.
In this case, the light beam has a wavelength of 340 nm in a material with a refractive index of 2.00. This means that the speed of light in the material is 1/2.00 = 0.5 times the speed of light in vacuum or air.
The relationship between the wavelength of light, its speed, and its frequency is given by the equation: c = λf where c is the speed of light, λ is the wavelength, and f is the frequency.
Since the speed of light in the material is 0.5 times the speed of light in air or vacuum, the frequency of the light remains the same, while its wavelength is reduced by a factor of 2.00: λ_material = λ_air/v_material = λ_air/2.00 Substituting the given value of λ_air = 340 nm, we get: λ_material = 170 nm
Therefore, the wavelength of the light beam in the material with a refractive index of 2.00 is 170 nm. This means that the light beam is strongly refracted when it enters the material, as it is bent towards the normal to the surface of the material due to the increase in its refractive index.
Know more about refractive index here:
https://brainly.com/question/29858469
#SPJ11
a.) Find the minimum kinetic energy needed for a 4.6×104-kg rocket to escape the Moon.
b.) Find the minimum kinetic energy needed for a 4.6×104-kg rocket to escape the Earth.
Answer both questions in two signifigant figures.
a.) The minimum kinetic energy needed for a 4.6×10^4-kg rocket to escape the Moon is 7.7×10^10 J.
The escape velocity of the Moon is approximately 2.4 km/s. Using the formula for kinetic energy (KE = 1/2 mv^2), where m is the mass of the rocket and v is the velocity needed to escape, we can calculate the kinetic energy required. Plugging in the given values, we get KE = 1/2 × 4.6×10^4 × (2.4×10^3)^2 = 7.7×10^10 J.
b.) The minimum kinetic energy needed for a 4.6×10^4-kg rocket to escape the Earth is 3.3×10^11 J.
The escape velocity of the Earth is approximately 11.2 km/s. Using the formula for kinetic energy (KE = 1/2 mv^2), where m is the mass of the rocket and v is the velocity needed to escape, we can calculate the kinetic energy required. Plugging in the given values, we get KE = 1/2 × 4.6×10^4 × (11.2×10^3)^2 = 3.3×10^11 J.
For more questions like Earth click the link below:
https://brainly.com/question/7981782
#SPJ11