if the solubility of o2 at 0.140 atm and 25 °c is 5.82 g/100 g h2o, what is the solubility of o2 at a pressure of 2.24 atm and 25 °c?

The inability to metabolize alcohol could result from a deficit of the enzyme alcohol dehydrogenase. This enzyme belongs to the class of oxidoreductases, which catalyze the transfer of electrons from one molecule to another.

Alcohol dehydrogenase is an enzyme that is involved in the metabolism of alcohol. It belongs to the class of oxidoreductases, which are enzymes that catalyze the transfer of electrons from one molecule to another. Specifically, alcohol dehydrogenase catalyzes the conversion of alcohol (ethanol) to acetaldehyde by transferring two electrons from the alcohol to the coenzyme nicotinamide adenine dinucleotide (NAD+), which is reduced to NADH. This reaction is an example of oxidation-reduction, or redox, chemistry. The inability to metabolize alcohol due to a deficit of alcohol dehydrogenase can result in the accumulation of alcohol and its toxic byproducts in the body, leading to symptoms such as flushing, nausea, and rapid heartbeat.

learn more about metabolize alcohol here:

https://brainly.com/question/28945966

#SPJ11

The molecular formula of polyvinyl chloride is (C₂H₃Cl)ₙ, where n is the number of repeating units in the polymer chain.

The given composition of vinyl chloride can be used to determine the empirical formula of the compound. To do this, we assume that we have 100g of the compound, which means we have 38.43g of carbon, 4.838g of hydrogen, and 56.72g of chlorine.

We then convert these masses to moles using the molar masses of each element:

- Moles of carbon = 38.43 g / 12.01 g/mol = 3.201 mol

- Moles of hydrogen = 4.838 g / 1.008 g/mol = 4.802 mol

- Moles of chlorine = 56.72 g / 35.45 g/mol = 1.599 mol

Next, we divide each of these mole values by the smallest mole value to get the mole ratio of the elements in the compound:

- Carbon: 3.201 mol / 1.599 mol = 2

- Hydrogen: 4.802 mol / 1.599 mol = 3

- Chlorine: 1.599 mol / 1.599 mol = 1

This gives us the empirical formula of vinyl chloride, which is C₂H₃Cl.

Polyvinyl chloride is formed by polymerizing vinyl chloride molecules to form a long chain of repeating units. The molecular mass of polyvinyl chloride is given as 23875 g/mol. To find the number of repeating units in the polymer chain, we divide the molecular mass by the molar mass of the empirical formula:

- Molar mass of C₂H₃Cl = 2(12.01 g/mol) + 3(1.008 g/mol) + 35.45 g/mol = 62.5 g/mol

- Number of repeating units = 23875 g/mol / 62.5 g/mol ≈ 382

Therefore, the molecular formula of polyvinyl chloride is (C₂H₃Cl)₃₈₂, which represents a long chain of 382 repeating units of vinyl chloride.

learn more about molecular formula here:

https://brainly.com/question/15960587

#SPJ11

H2 (H--H) has a lesser bond strength than F2 (F--F) .O2 (O=O) has a longer bond length than F2 (F-F) .I2 (I--I) has a lesser bond energy than F2 (F-F).

H2 (H--H) has a lesser bond strength than F2 (F--F) because the bond between two hydrogen atoms is weaker than the bond between two fluorine atoms.O2 (O=O) has a longer bond length than F2 (F-F) because the bond between two oxygen atoms is longer due to their larger atomic size compared to fluorine atoms.I2 (I--I) has a lesser bond energy than F2 (F-F) because the bond between two iodine atoms is weaker, and it requires less energy to break it compared to the bond between two fluorine atoms.

Bond strength is the strength with which a chemical bond holds two atoms together. Bond length is defined as the equilibrium distance between the nuclei of two bonded atoms in a molecule. Bond energy is the energy required to separate an isolated molecule into two fragments (atoms or radicals).

Learn more about bond length : https://brainly.com/question/3405662

#SPJ11

a. rubbery material.

Atactic polystyrene when quenched from 120°C to room temperature it becomes rubbery material.

Atactic polystyrene has a glass transition temperature (Tg) of -100°C. When it is quenched (cooled very quickly) from 120°C to room temperature, it becomes a rubbery material. This is because the rapid cooling prevents the polymer chains from arranging themselves in an orderly manner, leading to an amorphous structure.

If atactic polystyrene were to crystallize, it would become a glassy material. Crystallization involves the formation of a highly ordered and structured arrangement of polymer chains, resulting in a more rigid and glassy state.

However, atactic polystyrene is generally an amorphous polymer and does not crystallize easily due to its irregular molecular structure.

In summary, when atactic polystyrene is quenched from 120°C to room temperature, it forms a rubbery material.

Learn more about polystyrene here: https://brainly.com/question/29855572

#SPJ11

a. rubbery material.

Atactic polystyrene when quenched from 120°C to room temperature it becomes rubbery material.

Atactic polystyrene has a glass transition temperature (Tg) of -100°C. When it is quenched (cooled very quickly) from 120°C to room temperature, it becomes a rubbery material. This is because the rapid cooling prevents the polymer chains from arranging themselves in an orderly manner, leading to an amorphous structure.

If atactic polystyrene were to crystallize, it would become a glassy material. Crystallization involves the formation of a highly ordered and structured arrangement of polymer chains, resulting in a more rigid and glassy state.

However, atactic polystyrene is generally an amorphous polymer and does not crystallize easily due to its irregular molecular structure.

In summary, when atactic polystyrene is quenched from 120°C to room temperature, it forms a rubbery material.

Learn more about polystyrene here: https://brainly.com/question/29855572

#SPJ11

Ideally, the difference in weight between a flask containing 1 mol of C and another flask containing 1 mol of Pb should be 195.19 g

we will first need to understand some key terms and concepts such as "weight," "another flask," and "molar mass."
Weight refers to the force exerted on an object due to gravity, and in this case, it means the mass of the contents inside the flasks. "Another flask" simply means a separate flask that we will compare to the first flask in terms of weight. Now, let's discuss the concept of molar mass.
Molar mass is the mass of one mole of a substance, usually expressed in grams per mole (g/mol). It is calculated by adding up the atomic masses of all the atoms in a molecule or compound.
To determine the difference in weight between a flask containing 1 mol of C (carbon) and another flask containing 1 mol of Pb (lead), we need to find the molar masses of these elements.
The molar mass of carbon (C) is 12.01 g/mol, while the molar mass of lead (Pb) is 207.2 g/mol.
Now, let's calculate the difference in weight between these two flasks:
Weight difference = Molar mass of Pb - Molar mass of C
Weight difference = 207.2 g/mol - 12.01 g/mol
Weight difference = 195.19 g/mol
Therefore, ideally, the difference in weight between a flask containing 1 mol of C and another flask containing 1 mol of Pb should be 195.19 g.

learn more about carbon Refer: https://brainly.com/question/4975434

#SPJ11

When the two solutions are mixed, silver ions (Ag⁺) from the silver nitrate solution react with chloride ions (Cl⁻) from the sodium chloride solution to form the precipitate of silver chloride (AgCl).

When a 1.0 M solution of silver nitrate is mixed with a 0.1 M solution of sodium chloride, a precipitate of silver chloride is formed. This is because silver nitrate and sodium chloride react to form insoluble silver chloride.

The silver chloride precipitates out of the solution as a solid, while the sodium nitrate remains in solution.
When a 1.0 M solution of silver nitrate (AgNO₃) is mixed with a 0.1 M solution of sodium chloride (NaCl), a precipitate of silver chloride (AgCl) forms. Here's a step-by-step explanation:
1. Write the balanced chemical equation:
AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)
2. Identify the precipitate:
Silver chloride (AgCl) is the precipitate formed as it is the solid product in the reaction.

To know more about sodium chloride please refer: https://brainly.com/question/9811771

#SPJ11

SnI2(aq) --> Sn(s) + 2e-

I2(g) + 2e- --> 2I-(aq)

The given redox reaction is:

SnI2(aq) → Sn(s) + I2(g).

The oxidation half-reaction is the process in which SnI2 loses electrons and forms Sn(s). The electrons are written on the product side to balance the charge. Thus, the half-reaction for the oxidation half is:

SnI2(aq) → Sn(s) + 2e-.

The reduction half-reaction is the process in which I2 gains electrons and forms I-.

The electrons are written on the reactant side to balance the charge. Hence, the half-reaction for the reduction half is:

I2(g) + 2e- → 2I-(aq).

When these two half-reactions are combined, they yield the overall redox reaction:

SnI2(aq) → Sn(s) + I2(g).

Know more about Oxidation here:

https://brainly.com/question/13182308

#SPJ11

HNO₂ (nitrous acid) is the Bronsted-Lowry acid which is not considered to be a strong acid in water.

Bronsted acid are those species that are capable of  donating a proton to other species.

HBr is as strong Bronsted-Lowry acid, that reacts completely according to the following reaction.

HBr + H₂O → Br⁻ + H₃O⁺

HNO₃ is as strong Bronsted-Lowry acid, that reacts completely according to the following reaction.

HNO₃ + H₂O → NO₃⁻ + H₃O⁺

But, HNO₂ cannot react completely. So, it is not a strong acid in water.

To know more about Bronsted-Lowry here

https://brainly.com/question/15173023

#SPJ4

In the major product of the bromination reaction with two flanking cyclopropyl groups, the cyclopropyl groups will be in the trans configuration.

Bromination is a reaction that involves the addition of a bromine atom to a compound. In this case, the compound has two cyclopropyl groups, and the reaction will favor the formation of a trans product due to the lower steric hindrance compared to the cis configuration.

To know more about trans configuration, visit:

https://brainly.com/question/14678883

#SPJ11

The total pressure of the gas mixture which were transferred to a tank of 6.25 L at 51 °C is 1291.7 KPa.

Thus, For N₂: Volume (V) = 15.1 L. Temperature (T) = 25 °C = 25 + 273 = 298 K. Pressure (P) = 125 KPa. Gas constant (R) = 8.314 L.KPa/Kmol

PV = nRT= 125 × 15.1 = n × 8.314 × 298

1887.5 = n × 2477.572

n = 1887.5 / 2477.572

n = 0.762 mole

For O₂:

Volume (V) = 44.3 L. Temperature (T) = 25 °C = 25 + 273 = 298 K Pressure (P) = 125 KPa.Gas constant (R) = 8.314 L.KPa/Kmol Number of mole (n) =? PV = nRT

125 × 44.3 = n × 8.314 × 298

5537.5 = n × 2477.572. Divide both side by 2477.572

n = 5537.5 / 2477.572

n = 2.235 moles

Next, we shall determine the total mole of the mixture.

Mole of N₂ = 0.762 mole Mole of O₂ = 2.235 moles. Total mole = 0.762 + 2.235. Total mole = 2.997 moles. Volume (V) = 6.25 L. Temperature (T) = 51 °C = 51 + 273 = 324 K Gas constant (R) = 8.314 L.KPa/Kmol. Total of mole (n) = 2.997 moles

Thus, the total pressure of the gas mixture at 51 °C is 1291.7 KPa

Learn more about Pressure, refer to the link:

https://brainly.com/question/12971272

#SPJ1

elements heavier than iron are known to be formed is option e. Heavy elements are primarily formed in supernovae.

Elements heavier than iron are primarily formed in supernovae. During a supernova, a massive star undergoes a catastrophic explosion, which generates extremely high temperatures and pressures. These conditions are required for the fusion of lighter elements to form heavier ones, including elements like gold, silver, and uranium.

While black holes and Cepheid variable stars do play a role in the formation of heavy elements, they are not the primary sources. Black holes are not directly involved in the formation of heavy elements, although they may be associated with supernova explosions that produce them. Cepheid variable stars are a type of pulsating star that can help us to measure distances in the universe but they are not known to be a significant source of heavy elements.

All main sequence stars fuse hydrogen into helium in their cores, but they do not produce heavier elements in significant quantities. The helium flash process is a brief period of helium fusion that occurs in low-mass stars, but it does not produce elements heavier than helium.

learn more about supernovae here:

https://brainly.com/question/28348110

#SPJ11

Based on your Lewis structure number of bonding electrons are 8 anf  non-bonding electrons are 20.

The Lewis structure for carbon tetrabromide (CBr₄) shows that carbon is the central atom and it is bonded to four bromine atoms. Each bromine atom has seven valence electrons and the carbon atom has four valence electrons.

To determine the number of bonding electrons, we count the number of lines between the atoms, which represent shared electrons in a covalent bond. Since each atom is bonded to the carbon atom by a single bond, there are eight bonding electrons.

To determine the number of non-bonding electrons, we subtract the number of bonding electrons from the total number of valence electrons. The total number of valence electrons for CBr₄ is 32, which is calculated by adding the number of valence electrons for each atom (4 for carbon and 7 for each of the 4 bromine atoms).

Therefore, the number of non-bonding electrons is 32 - 8 = 24, and since there are four bromine atoms, the number of non-bonding electrons per atom is 6.

For more questions like Electron click the link below:

https://brainly.com/question/1255220

#SPJ11

The concentration of sucrose at 39 minutes would be 0.2263 M

To answer your question, we need to use the rate constant that was found in part b.

Since the reaction is zero order in sucrose, the rate law would look like: rate = k [sucrose]^0 which simplifies to:

rate = k

We can use this rate law to calculate the concentration of sucrose at 39 minutes.

To do so, we first need to calculate the value of k.

From part b, we know that the rate constant is 0.0023 M/min.

Next, we can use the integrated rate law for zero-order reactions:

[sucrose] = [sucrose]0 - kt

where [sucrose]0 is the initial concentration of sucrose, k is the rate constant, and t is the time elapsed.

Plugging in the given values, we get:

[sucrose] = 0.316 M - (0.0023 M/min)(39 min)

[sucrose] = 0.316 M - 0.0897 M

[sucrose] = 0.2263 M

Learn more about sucrose at

https://brainly.com/question/28869238

#SPJ11

The equilibrium constant has a definite value for every reversible reaction at a particular temperature. However it varies with change in temperature and it is independent of the initial concentration of the reactants. Here the expression of K is [CO][Cl₂]/[CoCl₂]. The correct option is C.

The ratio of the product of the molar concentrations of the products to that of the reactants with each concentration term raised to a power equal to its coefficient in the balanced chemical equation is called the equilibrium constant.

Here the equilibrium constant for the reaction is:

K = [CO][Cl₂]/[CoCl₂]

Thus the correct option is C.

To know more about equilibrium constant, visit;

https://brainly.com/question/12504520

#SPJ1

The frequency of light with a wavelength of 3.12 x 10⁻³ cm is approximately 9.62 x 10¹² s⁻¹.

To calculate the frequency of light with a given wavelength, we can use the equation;

c = λν

where c will be the speed of light (approximately 3.00 x 10⁸ m/s), λ will be the wavelength of light, and ν will be the frequency of light.

First, we need to convert the given wavelength of 3.12 x 10⁻³ cm to meters;

λ = 3.12 x 10⁻³ cm = 3.12 x 10⁻⁵ m

Now we can substitute the values into the equation and solve for ν;

c = λν

ν = c/λ

ν = (3.00 x 10⁸ m/s) / (3.12 x 10⁻⁵ m)

ν ≈ 9.62 x 10¹² s⁻¹

To know more about frequency here

https://brainly.com/question/5102661

#SPJ4

The number of milliliters of a 6.00 m NaOH solution are needed to provide 0.370 mol of NaOH is approximately 61.7 mL.

To find the number of milliliters needed of a 6.00 M NaOH solution to provide 0.370 mol of NaOH, you can use the formula:

M = mol / L

Where M is the molarity of the solution (6.00 M), mol is the number of moles of solute (0.370 mol), and L is the volume of the solution in liters.

Rearrange the formula to solve for L:

L = mol / M

L = 0.370 mol / 6.00 M

L ≈ 0.0617 L

Now, convert L to mL:

1 L = 1000 mL

0.0617 L × 1000 mL/L ≈ 61.7 mL

So, approximately 61.7 mL of the 6.00 M NaOH solution are needed to provide 0.370 mol of NaOH.

Learn more about molarity here: https://brainly.com/question/30404105

#SPJ11

The equilibrium molar concentration of Cu²⁺(aq) is 7.59×10−4 M M. The assumption was made that the concentration of Cu²⁺(aq) is negligible compared to that of NH₃.

The simplifying assumption we make here is that the concentration of Cu²⁺(aq) coming from the Cu(NO₃)₂⋅6H₂O is negligible compared to that coming from the reaction with aqueous ammonia.

The balanced equation for the reaction of Cu²⁺ with aqueous ammonia is:

Cu²⁺(aq) + 4 NH₃(aq) ⇌ Cu(NH₃)₄²⁺(aq)

The overall formation constant, β4, is given by:

β4 = [Cu(NH₃)₄²⁺(aq)] / ([Cu²⁺(aq)] [NH₃(aq)]⁴)

At equilibrium, the concentrations of Cu(NH₃)₄²⁺(aq), Cu²⁺(aq), and NH₃(aq) are denoted by x, y, and z, respectively. Since one mole of Cu(NO₃)₂⋅6H₂O produces one mole of Cu²⁺(aq), the initial concentration of Cu2+(aq) is:

y0 = n / V = (12.5 g / 249.7 g/mol) / 0.500 L = 0.100 M

The equilibrium concentrations are related to the equilibrium constant by the mass balance equations:

x + y = y0

4x + z = 1.00 M

Substituting x = y0 - y into the second equation and solving for z gives:

z = 1.00 M - 4x = 1.00 M - 4(y0 - y) = 1.00 M - 4(0.100 M - y)

z = 1.00 M - 0.400 M + 4y = 0.600 M + 4y

Substituting the equilibrium concentrations into the expression for β4 gives:

2.1×10−13 = x / (y0 - y) z⁴

Simplifying and substituting in the expressions for x and z:

2.1×10−13 = (y0 - 2y) / (y0 - y) (0.600 M + 4y)⁴

Expanding the denominator and rearranging:

2.1×10−13 (y0 - y) = (y0 - 2y) (0.600 M + 4y)⁴

2.1×10−13 y0 - 2.1×10−13 y = (y0 - 2y) (0.600 M + 4y)⁴

Dividing by y0 - 2y and simplifying:

2.1×10−13 y0 / (y0 - 2y) - 2.1×10−13 = (0.600 M + 4y)⁴

At equilibrium, y is much smaller than y0, so we can neglect the term -2.1×10−13 and simplify further:

2.1×10−13 y0 / y0 = (0.600 M)⁴

Solving for y:

y = (2.1×10−13)^(1/4) (0.600 M) = 7.59×10−4 M

Therefore, the equilibrium molar concentration of Cu²⁺(aq) is approximately 7.59×10−4 M.

To know more about the equilibrium molar concentration refer here :

https://brainly.com/question/17137354#

#SPJ11

The dissociation of acetic acid is more ordered because it involves the transfer of a proton from the acid to water molecules.

This process is characterized by the formation of hydronium ions and acetate ions.

The dissociation of acetic acid is a reversible process that follows a specific chemical equilibrium.

In addition, the dissociation of acetic acid is also influenced by the pH of the solution and the concentration of the acid.

Overall, the dissociation of acetic acid is a complex process that involves multiple steps and is influenced by various factors.

To know more about acetic acid, refer here:

https://brainly.com/question/12924347#

#SPJ11

The pH of a 0.0025 M Ba(OH)2 solution is 11.70. The correct option is b.

The pH of a solution can be calculated using the equation pH = -log[H+], where [H+] represents the concentration of hydrogen ions in the solution. In this case, we need to find the pH of a 0.0025 M Ba(OH)2 solution.

Ba(OH)2 dissociates into Ba2+ and 2OH- ions in water. Therefore, the concentration of hydroxide ions can be calculated by multiplying the concentration of Ba(OH)2 by 2, which gives us 0.005 M.

Next, we can use the equation Kw = [H+][OH-] to calculate the concentration of hydrogen ions. At 25°C, the value of Kw is 1.0 x 10^-14. Substituting the values we have, we get:

1.0 x 10^-14 = [H+][0.005]
[H+] = 2.0 x 10^-12 M

Finally, we can calculate the pH using the pH equation:

pH = -log[H+]
pH = -log(2.0 x 10^-12)
pH = 11.70

Therefore, the pH of a 0.0025 M Ba(OH)2 solution is 11.70, which corresponds to answer option (b).

For more such questions on pH.

https://brainly.com/question/15679811#

#SPJ11

The volume of 15.0 M NH₃ that would be needed to make 0.630 moles of NH₃ is 42.0 mL or 0.042 L.

To solve this problem, we can use the equation:

moles = volume x concentration

We are given the number of moles we need (0.630) and the concentration of ammonia (15.0 M). Rearranging the equation to solve for volume, we get:

volume = moles / concentration

Plugging in the values we have, we get:

volume = 0.630 moles / 15.0 M

Simplifying this expression, we get:

volume = 0.042 L or 42.0 mL

Therefore, we would need a volume of 42.0 mL of 15.0 M NH3 to make 0.630 moles of NH₃.

Learn more about concentration here:https://brainly.com/question/26255204

#SPJ11

The alkalinity of the solution is 124.5 mg/L as CaCO3.

The alkalinity of a solution with a pH of 10.33 containing 50 mg/L of bicarbonate (HCO3-) and 50 mg/L of carbonate (CO3²-) can be calculated as follows:

1. Convert bicarbonate and carbonate concentrations to milliequivalents (meq/L) using their respective molecular weights (1 meq of HCO3- = 61 mg, 1 meq of CO3²- = 30 mg):
  - Bicarbonate: 50 mg/L ÷ 61 mg/meq = 0.82 meq/L
  - Carbonate: 50 mg/L ÷ 30 mg/meq = 1.67 meq/L

2. Add the milliequivalents together:
  - Total Alkalinity (meq/L) = 0.82 meq/L + 1.67 meq/L = 2.49 meq/L

3. Convert total alkalinity from meq/L to mg/L as CaCO3 by multiplying by the equivalent weight of CaCO3 (50 mg/meq):
  - Total Alkalinity (mg/L as CaCO3) = 2.49 meq/L × 50 mg/meq = 124.5 mg/L

Thus, the alkalinity of the solution is 124.5 mg/L as CaCO3.

Know more about alkalinity here:

https://brainly.com/question/11584594

#SPJ11

The Ksp for Ag2CrO4 is D. 5.8*10^-12.

We want to calculate the Ksp for Ag2CrO4 given its solubility in mol/L is 1.8*10^-4 M.
First, let's write the balanced dissolution equation for Ag2CrO4:
Ag2CrO4 (s) <=> 2Ag+ (aq) + CrO4²⁻ (aq)
Next, we'll express the solubility in terms of equilibrium concentrations:
[Ag+] = 2x and [CrO4²⁻] = x, where x = 1.8*10^-4 M (solubility of Ag2CrO4).

Now, substitute the equilibrium concentrations into the Ksp expression:
Ksp = [Ag+]²[CrO4²⁻] = (2x)²(x)= 4x^3

Plug in the value of x (1.8x10^-4 M) into the equation:
Ksp = 4(1.8*10^-4)^3

Calculate the Ksp:
Ksp =4(1.8*10^-4)^3 = 5.832 *10^-12= 5.8*10^-12
So, the Ksp for Ag2CrO4 is 5.8*10^-12 , which corresponds to option D.

Learn more about Solubility : https://brainly.com/question/23946616

#SPJ11

A) 2FeO(l) + 2Al(l) → Al2O3(l) + 2Fe(l) B) 3MnO2(l) + 4Al(l) → 2Al2O3(l) + 3Mn(l) In both chemical equations, the phases are indicated by (l) for liquid.

A) To balance the equation FeO(l) + Al(l) → Al2O3(l) + Fe(l), follow these steps:

1. Balance the Fe atoms:
FeO(l) + Al(l) → Al2O3(l) + Fe(l) is already balanced for Fe.

2. Balance the Al atoms:
2FeO(l) + 3Al(l) → Al2O3(l) + 2Fe(l)

3. Balance the O atoms:
The equation is already balanced for O.

So, the balanced chemical equation is:
2FeO(l) + 3Al(l) → Al2O3(l) + 2Fe(l)

B) To balance the equation MnO2(l) + Al(l) → Al2O3(l) + Mn(l), follow these steps:

1. Balance the Mn atoms:
MnO2(l) + Al(l) → Al2O3(l) + Mn(l) is already balanced for Mn.

2. Balance the Al atoms:
3MnO2(l) + 4Al(l) → 2Al2O3(l) + 3Mn(l)

3. Balance the O atoms:
The equation is already balanced for O.

So, the balanced equation is:
3MnO2(l) + 4Al(l) → 2Al2O3(l) + 3Mn(l)

To learn more about balanced chemical equation, visit: https://brainly.com/question/29423710

#SPJ11

The expected amount of Ni deposited on the zinc electrode is 0.0307 g. The amount of nickel (Ni) deposited on a zinc electrode can be calculated using Faraday's law of electrolysis:

mass of Ni = (I * t * M) / (n * F)

where I is the current, t is the time in seconds, M is the molar mass of Ni, n is the number of electrons transferred per Ni atom during reduction, and F is the Faraday constant.

First, we need to calculate the number of moles of electrons transferred per Ni atom. Since [tex]Ni_{2+}[/tex] is reduced to Ni by gaining two electrons, n = 2.

The molar mass of Ni is 58.69 g/mol. The Faraday constant is 96,485 C/mol.

Converting the given values, we have:

I = 5.00 A

t = 15.00 minutes = 900 s

E = 2.00 V

From the given potential difference and using the Nernst equation, we can calculate the standard potential for the [tex]Ni_{2+}[/tex] + 2e- → Ni redox reaction to be -0.25 V. Therefore, the cell potential is 2.00 V - (-0.25 V) = 2.25 V.

Using the equation above, we get:

mass of Ni = (5.00 A * 900 s * 0.05869 kg/mol) / (2 * 96485 C/mol)

mass of Ni = 0.0307 g

Therefore, the expected amount of Ni deposited on the zinc electrode is 0.0307 g.

To know more about Faraday's law, refer here:

https://brainly.com/question/13369951#

#SPJ11

The structure of the final product of the Stork reaction between cyclohexanone and propenal is a 1,5-dicarbonyl compound with a dimethylamine substituent on one of the carbonyl groups.

The Stork reaction involves the formation of an enamine intermediate between cyclohexanone and dimethylamine, followed by a Michael addition of the enamine to propenal. The resulting Michael adduct is a 1,5-dicarbonyl compound with an amine substituent.

The final product after hydrolysis of the enamine and elimination of dimethylamine is a 1,5-dicarbonyl compound with a dimethylamine substituent on one of the carbonyl groups. The amine group is not shown in the drawn structure of the final product, as per the instruction.

For more questions like Reaction click the link below:

https://brainly.com/question/28984750

#SPJ11

The heat used to heat the 21.97-gram sample of iron from 5.8 degrees Celsius to 100.00 degrees Celsius is 926.64 joules.

To calculate the heat (in joules) used to heat a 21.97-gram sample of iron from 5.8 degrees Celsius to 100.00 degrees Celsius with a specific heat of 0.450 J/g*C, you can use the following formula:

q = mcΔT

where q represents the heat, m is the mass of the sample, c is the specific heat, and ΔT is the change in temperature.

1. Identify the variables:
m = 21.97 g (mass of iron)
c = 0.450 J/g*C (specific heat of the iron)
ΔT = 100.00 - 5.8 = 94.2°C (change in temperature)

2. Plug the values into the formula:
q = (21.97 g) * (0.450 J/g*C) * (94.2°C)

3. Calculate the heat:
q = 926.641 J

4. Round the answer to 2 decimal spaces:
q ≈ 926.64 J

To know more about Heat:

https://brainly.com/question/31360204

#SPJ11

The reaction that illustrates ∆H°f for Mg(NO₃)₂ is Mg²⁺(aq) + 2 NO₃ -(aq) → Mg(NO₃)₂(aq). So, the correct answer is option B.

Option B represents the formation of magnesium nitrate (Mg(NO3)2) from its constituent ions in an aqueous solution. This is the formation reaction, and the enthalpy change associated with this reaction is the standard enthalpy of formation (∆H°f) for Mg(NO₃)₂.

Option A represents the combustion of magnesium in the presence of nitrogen and oxygen, which is not directly related to the formation of Mg(NO₃)₂.

Option C represents the formation of magnesium nitrate from magnesium and nitrogen in their elemental forms, which is not a likely reaction to form Mg(NO₃)₂.

Option D represents the dissociation of Mg(NO₃)₂ in an aqueous solution into its constituent ions, which is not a formation reaction.

Option E represents the decomposition of Mg(NO₃)₂ into its constituent elements, which is not a formation reaction either.

Therefore, option B is the correct answer as it represents the formation of Mg(NO₃)₂ from its constituent ions in an aqueous solution, which is the relevant reaction to determine the standard enthalpy of formation (∆H°f) for Mg(NO₃)₂.

You can learn more about the aqueous solutions at: brainly.com/question/26856926

#SPJ11

At 298 K, ethene gas has a standard enthalpy of formation of -780.1 kJ/mol.

As a result of subtracting the total of the standard enthalpies of formation of the reactants from the sum of the standard enthalpies of formation of the products, the standard enthalpy change of formation is determined.

The balanced equation for ethene gas combustion is:

ethene(g) + 3 Oxygen(g) → 2 Carbon dioxide(g) + 2 Water(l) ΔH° = -1411.1 kJ/mol

In terms of the enthalpies at which the products and reactants form, the enthalpy change of this reaction can also be stated as follows:

ΔH° = ΣΔHf°(products) - ΣΔHf°(reactants)

where Hf° is the compound's typical formation enthalpy.

To find the undetermined enthalpy of ethene gas production, we can rearrange this equation as follows:

ΔHf°(ethene(g)) = ΣΔHf°(products) - ΣΔHf°(reactants)

ΔHf°(ethene(g)) = [2ΔHf°(Carbon dioxide(g)) + 2ΔHf°(Water(l))] - [ΔHf°(ethene(g)) + 3ΔHf°(Oxygen(g))]

Using the provided data and substituting the known enthalpy values:

ΔHf°(ethene(g)) = [2(-393.5 kJ/mol) + 2(-285.8 kJ/mol)] - [ΔHf°(ethene(g)) + 3(0 kJ/mol)]

Simplifying the expression:

ΔHf°(ethene(g)) = -1560.2 kJ/mol + ΔHf°(ethene(g))

ΔHf°(ethene(g)) + ΔHf°(ethene(g)) = -1560.2 kJ/mol

2ΔHf°(ethene(g)) = -1560.2 kJ/mol

ΔHf°(ethene(g)) = -780.1 kJ/mol

To know more about enthalpy visit:-

https://brainly.com/question/13996238

#SPJ1

This means that log(n) is the slowest growing function, followed by n, then n*log(n), then [tex]n^2[/tex], and finally n!.

If we have an increasing big-O order of the functions, this means that each subsequent function grows faster than the one before it. So we have:
[tex]log(n) < n < n*log(n) < n^2 < n![/tex]
This means that log(n) is the slowest growing function, followed by n, then n*log(n), then [tex]n^2[/tex], and finally n!. Note that O(n!) is the largest function in this list, and it grows faster than any of the other functions listed. This is because the factorial function grows very quickly as n increases, even faster than exponential functions like [tex]2^n[/tex] or [tex]10^n[/tex]. Therefore, n! is considered to be a very "expensive" function in terms of time and space complexity.

Learn more about space :

https://brainly.com/question/21725400

#SPJ11

KHP + NaOH → NaKP + H2O

The balanced formula unit equation that describes the chemical reaction between KHP (potassium hydrogen phthalate) and NaOH (sodium hydroxide) is KHP + NaOH → NaKP + H2O.

KHP is an acid while NaOH is a base. When they are mixed together, a chemical reaction occurs and produces the salt NaKP (sodium potassium phthalate) and water, H2O. This is known as a neutralization reaction because the acid and base cancel each other out, resulting in a neutral solution.

The acid and base react to produce a salt and water, which is what occurs when an acid and base neutralize each other. The exchange of hydrogen atoms from the acid to the base is what makes the reaction happen, resulting in the formation of the salt and water.

This reaction is reversible and the products can be broken down back into the original substances, although this is usually not done. This reaction is important in many industries, such as food production, where it is used to preserve food and adjust its pH.

Know more about Chemical reaction here

https://brainly.com/question/28289709#

#SPJ11