If you took the nmr spectrum of octane, how many signals would you expect to see? Would the signal for the protons on carbon 3 be very different from the signal for the proton on c4? What if the chain were longer, maybe 25 carbons? One hundred carbons? What about 25,000 carbons, the typical number in a polyethylene chain that you’d find in a plastic grocery bag? Are the protons on c3 distinguishable from those on carbon 792 or carbon 8926?

In the recrystallization of acetanilide experiment, activated charcoal is added to the solution to remove impurities and improve product purity.

Activated charcoal is a highly porous material that can adsorb impurities, resulting in a cleaner and more pure acetanilide product after recrystallization.

During the experiment, the acetanilide is first dissolved in a hot solvent to form a saturated solution. Activated charcoal is then added to this hot solution, where it adsorbs any colored or unwanted impurities present in the mixture.

After adding the activated charcoal, the solution is usually filtered to remove both the charcoal and the impurities bound to it. This leaves behind a clearer solution containing dissolved acetanilide.

As the solution cools, the acetanilide recrystallizes, and the purified crystals can be collected by filtration. The use of activated charcoal in this step is crucial for obtaining a high-purity final product, as it effectively removes contaminants from the solution.

To know more about acetanilide experiment click on below link:

https://brainly.com/question/14562247#

#SPJ11

Yes, a reaction occurs when aqueous solutions of iron(III) nitrate and potassium hydroxide are combined and this reaction is a type of double displacement reaction.

A type of double displacement reaction, also known as a metathesis reaction is a process in which the ions in the reactants switch places to form new products.

The reactants are iron(III) nitrate (Fe(NO₃)₃) and potassium hydroxide (KOH). When these two solutions are combined, the iron(III) ions (Fe³⁺) react with the hydroxide ions (OH⁻) to form a precipitate of iron(III) hydroxide (Fe(OH)₃), which is an insoluble compound. At the same time, the potassium ions (K⁺) react with the nitrate ions (NO₃⁻) to form a soluble compound, potassium nitrate (KNO₃).

The balanced chemical equation for this reaction is:

Fe(NO₃)₃ (aq) + 3 KOH (aq) → Fe(OH)₃ (s) + 3 KNO₃ (aq)

The formation of the solid precipitate, iron(III) hydroxide, is evidence of the reaction taking place. This reaction can be categorized as a precipitation reaction, which is a subtype of double displacement reactions, where an insoluble product is formed.

In summary, when aqueous solutions of iron(III) nitrate and potassium hydroxide are combined, a double displacement reaction occurs, forming iron(III) hydroxide as an insoluble precipitate and potassium nitrate as a soluble product.

Learn more about double displacement reaction here: https://brainly.com/question/26413416

#SPJ11

The example of a pyramidal molecule is [tex]NF_{3}[/tex] , also known as nitrogen trifluoride. The Correct option is C

A pyramidal molecule is a type of molecular geometry where the central atom is surrounded by three or more atoms, resulting in a pyramid-like shape. This shape occurs when the central atom has one or more lone pairs of electrons, which affect the molecular geometry and cause a distortion from the idealized symmetry of a tetrahedral shape.

In the case of [tex]NF_{3}[/tex], the central nitrogen atom has three fluorine atoms bonded to it and one lone pair of electrons, resulting in a trigonal pyramidal molecular geometry. The other options listed, such as [tex]BF_{3}[/tex] and [tex]CO_{2}[/tex], have a different molecular geometry, with different numbers of atoms surrounding the central atom.

Learn more about pyramidal molecule

https://brainly.com/question/14060871

#SPJ4

Complete Question:

Which of the following molecules is an example of a pyramidal molecule?

a) SF2

b) BF3

c) NF3

d) CO2

e) CH2O

The anion in each of the following compounds CaO, Na₂SO₄, KClO₄, Fe(NO₃)₂, Cr(OH)₃ is oxide (O²⁻), sulfate (SO₄²⁻), perchlorate (ClO₄⁻), nitrate (NO₃⁻), and hydroxide (OH⁻), respectively.

An anion is a negatively charged ion that is formed when an atom gains one or more electrons. An atom typically gains electrons to achieve a more stable electron configuration, which is often accomplished by filling or partially filling its outermost electron shell. Anions are named based on the element they are derived from and end in the suffix "-ide."

Calcium oxide (CaO) has the anion oxide (O²⁻), sodium sulfate (Na₂SO₄) has the anion sulfate (SO₄²⁻), potassium perchlorate (KClO₄) has the anion perchlorate (ClO₄⁻), iron(II) nitrate (Fe(NO₃)₂) has the anion nitrate (NO₃⁻), and chromium(III) hydroxide (Cr(OH)₃) has the anion hydroxide (OH⁻).

Learn more about anion here: https://brainly.com/question/30386581

#SPJ11

Using the VSEPR model, the electron pair arrangement around the central atom in BrF4 is D. trigonal bipyramidal.

In the VSEPR model, the electron pair geometry is determined by the number of bonding pairs and lone pairs surrounding the central atom. In BrF4, the central atom is bromine (Br), which is bonded to four fluorine (F) atoms. Additionally, there is one lone pair of electrons on the bromine atom.

Considering that bromine has five electron pairs (four bonding pairs and one lone pair), this results in a trigonal bipyramidal geometry. In this arrangement, the lone pair occupies an equatorial position, while the four fluorine atoms form two axial and two equatorial positions, with the axial positions being 180° apart and the equatorial positions being 120° apart. This electron pair geometry minimizes electron repulsion and leads to a stable molecular structure.

Therefore, the correct answer is D. trigonal bipyramidal.

Learn more about VSEPR model here: https://brainly.com/question/20195039

#SPJ11

Learn more about central atom

brainly.com/question/29422259

#SPJ11

First we need to calculate the number of moles of K₂SO₄ (potassium sulfate) in 25.0 mL of 0.255 M solution.

a) 0.255 moles K₂SO₄ / 1 L solution * 0.0250 L solution = 0.006375 moles K₂SO₄

Therefore, there are 0.006375 moles of K₂SO₄ present in 25.0 mL of this solution.

b) To calculate the volume of 0.255 M K₂SO₄ required to supply 0.0600 mol of K₂SO₄:

0.0600 moles K₂SO₄ / 0.255 moles per L = 0.235 L

0.235 L * 1000 mL/L = 235 mL

Therefore, 235 mL of this solution are required to supply 0.0600 mol of K₂SO₄.

(c) To prepare a 0.800 M K₂SO₄ solution from 1.50 L of 0.255 M K₂SO₄ solution:

Let x be the mass of K₂SO₄ required in grams. We can use the formula:

M₁V₁ = M₂V₂

where M₁ will represent initial concentration, V₁ will represent  the initial volume, M₂ will represent  the final concentration, and V₂ will represent the final volume.

0.255 M * 1.50 L = 0.800 M * 1.50 L + x grams / (174.26 g/mol)

x = (0.255 M * 1.50 L - 0.800 M * 1.50 L) * 174.26 g/mol = 34.90 g

Therefore, 34.90 grams of K₂SO₄ are needed to prepare 1.50 L of a 0.800 M K₂SO₄ solution.

(d) To calculate the molarity of the diluted solution:

M₁V₁ = M₂V₂

The initial volume is 40.0 mL, and the final volume is 135 mL, which means that the dilution factor is:

V₂/V₁ = 135 mL / 40.0 mL = 3.375

The final concentration can be calculated as:

M₂ = M₁ / (V1/V2) = 0.255 M / 3.375 = 0.0754 M

Therefore, the molarity of the diluted solution is 0.0754 M.

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ1

In adipose tissue, fructose is primarily metabolized through the pathway of fructose-1-phosphate. This is because adipose tissue lacks the enzyme fructokinase, which is required for the conversion of fructose to fructose-6-phosphate.

In adipose tissue, fructose is primarily metabolized through the pathway of fructose-1-phosphate. This is because adipose tissue lacks the enzyme fructokinase, which is required for the conversion of fructose to fructose-6-phosphate. Therefore, the only route for fructose metabolism in adipose tissue is through the conversion of fructose to fructose-1-phosphate, which is then cleaved to dihydroxyacetone phosphate (DHAP) and glyceraldehyde-3-phosphate (GAP) by aldolase B. These two molecules can then enter glycolysis and be used for energy production or converted to fatty acids for storage in adipose tissue.
In adipose tissue, fructose is metabolized by first being converted to fructose-1-phosphate. Then, it is cleaved into two molecules: glyceraldehyde (GAP) and dihydroxyacetone phosphate (DHAP). These two molecules can then enter glycolysis, allowing the fructose to be further metabolized.

To learn more about conversion, click here:

brainly.com/question/3477680

#SPJ11

Answer:

No

Explanation:

The bonds are as follows, listed from highest to lowest polarity:

b. S-Br > c. C-P > a. O-Cl

The atoms forming the bonds have electronegativities that are

[tex]O = 3.44Cl = 3.16S = 2.58Br = 2.96C = 2.55P = 2.19a. O-Cl bond: \\\\344 - 3.16 = 0.28b. S-Br bond: 2.96 - 2.58 = 0.38c. C-P bond: 2.55 - 2.19 = 0.36[/tex]

Polarity in chemical bonding is the distribution of electrical charge among the atoms linked by the bond. For instance, the chlorine atom is slightly negatively charged while the hydrogen atom in hydrogen chloride is slightly positively charged.

to know more about polarity here;

brainly.com/question/30002497

#SPJ1

The expression for the equilibrium constant (Kc) of the chemical equation CH4(g) + 2H2S(g) ⇌ CS2(g) + 4H2(g) is given by:

Kc = [CS2][H2]^4 / [CH4][H2S]^2

Where [ ] represents the concentration of each species at equilibrium.

To identify an expression for the equilibrium constant (K) for the given chemical equation:

CH4(g) + 2H2S(g) ⇌ CS2(g) + 4H2(g)

The equilibrium constant expression, K, is determined by taking the product of the concentrations of the products raised to their stoichiometric coefficients, divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients. In this case:

K = ([CS2]^1 * [H2]^4) / ([CH4]^1 * [H2S]^2)

where [CS2], [H2], [CH4], and [H2S] represent the equilibrium concentrations of the respective compounds.

Learn more about chemical equation here: brainly.com/question/30087623

#SPJ11

The difference between the two half-reactions' standard reduction potentials is what determines the cell potential of an electrochemical cell. The first half-reaction's standard reduction potential is 0.799V, and the second half-reaction's standard reduction potential is -0.771V.

The electrochemical cell's cell potential is therefore equal to the difference between these two readings, which is equal to 0.799V + (-0.771V) = 0.028V. The cell potential, which indicates the greatest amount of energy the cell is capable of producing, is a crucial electrochemical metric.

It is a gauge of the cell's potential energy and is determined by the difference between the standard reduction potentials of the two half-reactions. The more energy that can be created by cells depends on their cell potential.

The capacity of the cell to create energy increases with its potential. The electrochemical cell in the example can only generate a negligibly small quantity of energy, as indicated by its cell potential of 0.028V.

Learn more about  cell potential at:

https://brainly.com/question/1313684

#SPJ1

The wavelength of visible light with a frequency of 4.37 x [tex]10^{14}[/tex] s^-1 is approximately 686 nm (Option C).

To calculate the wavelength of visible light with a frequency of 4.37 x [tex]10^{14}[/tex] s^-1, you can use the formula:
Wavelength (λ) = Speed of light (c) / Frequency (f)

The speed of light (c) is approximately 3.0 x [tex]10^{8}[/tex] m/s.

Plug in the given frequency (f) into the formula:

λ = (3.0 x [tex]10^{8}[/tex] m/s) / (4.37 x [tex]10^{14}[/tex] s^-1)
λ ≈ 6.86 x [tex]10^{-7}[/tex] m

To convert the wavelength to nanometers (nm), multiply by [tex]10^{9}[/tex]:
λ ≈ 6.86 x [tex]10^{-7}[/tex] m * [tex]10^{9}[/tex] nm/m = 686 nm

To know more about Wavelength:

https://brainly.com/question/868404

#SPJ11

Hi, I'd be happy to help with your question. In order to determine if δS (change in entropy) is positive for the given reaction, we need to consider the states of the reactants and products. A positive δS indicates an increase in randomness or disorder in the system.

The given reaction is:
2 KClO3 (s) → 2 KCl (s) + 3 O2 (g)

Here, two moles of solid potassium chlorate (KClO3) decompose to produce two moles of solid potassium chloride (KCl) and three moles of gaseous oxygen (O2).

To determine if δS is positive for this reaction, we compare the initial and final states:

Initial state: 2 moles of solid KClO3
Final state: 2 moles of solid KCl + 3 moles of gaseous O2

Since the reaction produces more gaseous molecules (3 moles of O2) than there were initially (0 moles of gas), there is an increase in randomness or disorder in the system. Therefore, δS is positive for the reaction.

https://brainly.com/question/31485614

#SPJ11

The missing particle for the nuclear decay reaction 60²⁷Co → 60²⁸Ni is beta particle (electron) or β⁻.

To find the missing particle for the nuclear decay reaction 60²⁷Co → 60²⁸Ni, you need to consider the conservation of nucleon numbers (protons and neutrons).

Step 1: Identify the initial and final nucleon numbers.

Initial: 60²⁷Co (27 protons and 33 neutrons)

Final: 60²⁸Ni (28 protons and 32 neutrons)

Step 2: Compare the initial and final numbers to find the missing particle.

Protons: 27 initial - 28 final = -1

Neutrons: 33 initial - 32 final = 1

Step 3: Determine the missing particle based on the changes in protons and neutrons.

The changes indicate that a neutron is converted into a proton, which means a beta particle (electron) is emitted.

So, the missing particle for the nuclear decay reaction 60²⁷Co → 60²⁸Ni is a beta particle (electron), represented by 0⁻1e or simply β⁻. The complete reaction would be:

60²⁷Co → 60²⁸Ni + β⁻

Learn more about nuclear decay: https://brainly.com/question/10757669

#SPJ11

The identity of nucleus X in the given nuclear transmutation 238 92 U(n, β−) X is neptunium-239, represented as 239 93 Np.

Considering the given nuclear transmutation: 238 92 U(n, β−) X, we will determine the identity of nucleus X by following these steps:
1. Determine the initial number of protons and neutrons in the uranium-238 nucleus.
2. Account for the addition of a neutron and the release of a beta particle (electron).
3. Identify the new nucleus based on the resulting number of protons and neutrons.

Step 1: The uranium-238 nucleus initially has 92 protons and 146 neutrons (238 - 92 = 146).

Step 2: When a neutron is added, the number of neutrons increases by 1, making it 147 neutrons. Since a beta particle (electron) is released, a neutron converts to a proton. Thus, the number of neutrons decreases by 1 (147 - 1 = 146), and the number of protons increases by 1 (92 + 1 = 93).

Step 3: The new nucleus has 93 protons and 146 neutrons, which corresponds to the element neptunium (Np). Therefore, nucleus X is neptunium-239 or 239 93 Np.

To know more about "Nuclear transmutation" refer here:

https://brainly.com/question/30544283#

#SPJ11

The identity of nucleus X in the given nuclear transmutation 238 92 U(n, β−) X is neptunium-239, represented as 239 93 Np.

Considering the given nuclear transmutation: 238 92 U(n, β−) X, we will determine the identity of nucleus X by following these steps:
1. Determine the initial number of protons and neutrons in the uranium-238 nucleus.
2. Account for the addition of a neutron and the release of a beta particle (electron).
3. Identify the new nucleus based on the resulting number of protons and neutrons.

Step 1: The uranium-238 nucleus initially has 92 protons and 146 neutrons (238 - 92 = 146).

Step 2: When a neutron is added, the number of neutrons increases by 1, making it 147 neutrons. Since a beta particle (electron) is released, a neutron converts to a proton. Thus, the number of neutrons decreases by 1 (147 - 1 = 146), and the number of protons increases by 1 (92 + 1 = 93).

Step 3: The new nucleus has 93 protons and 146 neutrons, which corresponds to the element neptunium (Np). Therefore, nucleus X is neptunium-239 or 239 93 Np.

To know more about "Nuclear transmutation" refer here:

https://brainly.com/question/30544283#

#SPJ11

Therefore, the order of increasing bond length is HF < HCl < HBr < HI.

To arrange the given compounds HCl, HI, HBr, and HF in order of their increasing bond length, consider the size of the halogen atoms involved. Bond length increases with the size of the atoms involved in the bond.

1. HF: Fluorine is the smallest halogen, resulting in the shortest bond length.
2. HCl: Chlorine is larger than fluorine, so the bond length in HCl is longer than HF.
3. HBr: Bromine is larger than chlorine, leading to a longer bond length in HBr compared to HCl.
4. HI: Iodine is the largest halogen in the list, so HI has the longest bond length.

To know more about Bond Length:

https://brainly.com/question/29632549

#SPJ11

To calculate the amount of heat required to warm the 19.6 g of brick from 20.4 °C to 47.3 °C, we need to use the formula:

q = mcΔT

where q is the heat in calories, m is the mass in grams, c is the specific heat capacity in cal/g°C, and ΔT is the change in temperature in °C.

First, we need to find the specific heat capacity of the brick. The specific heat capacity of a typical brick is approximately 0.2 cal/g°C.

Next, we need to find the change in temperature (ΔT):
ΔT = final temperature - initial temperature = 47.3 °C - 20.4 °C = 26.9 °C

Now, we can plug the values into the formula:
q = (19.6 g) x (0.2 cal/g°C) x (26.9 °C)

q = 105.248 cal

Therefore, 105.248 calories of heat must be added to warm the 19.6 g of brick from 20.4 °C to 47.3 °C, assuming no changes in state occur during the temperature change.

Learn more about specific heat capacity here:

https://brainly.com/question/29766819

#SPJ11

cis and trans isomerism refers to the orientation of substituents on a double bond or ring. Cis means they are on the same side, while trans means they are on opposite sides.

the structures of the molecules for the terms "cis" and "trans" isomers. Please let me know if this is what you were looking for.

Cis isomer:

    H

    |

H--C=C--H

    |

    H

Trans isomer:

    H

    |

H--C=C--H

    |

    H

In the cis isomer, the two substituents (in this case, the hydrogens) are on the same side of the double bond. In the trans isomer, the two substituents are on opposite sides of the double bond. The relative stereochemistry of the cis and trans isomers is different due to their different geometric arrangements.

learn more about trans isomerism here:

https://brainly.com/question/20488243

#SPJ11

The correct answer is d. Ru (Ruthenium). The electron configuration of Ru is [tex][Kr] 5s^2 4d^6[/tex], but when it is in its ground state, one of the 4d electrons is promoted to the 5s orbital.

Ruthenium is a rare transition metal element that has the atomic number 44 and the symbol Ru. It is part of the platinum group of metals, which also includes elements like platinum, palladium, and rhodium. It has a silvery-white metallic appearance and is one of the densest elements, with a density of 12.4 g/cm³. It has a high melting point of 2,334°C and a boiling point of 4,696°C. It is a hard, brittle metal that is resistant to corrosion and oxidation. It is used in various industrial and technological applications, such as in the production of hard disk drives, electrical contacts, and jewelry.

Learn more about transition metal :

https://brainly.com/question/29828769

#SPJ11

Answer:

0.0194 g or 19.4 mg

Explanation:

First convert the number of molecules into moles by a conversion factor 6.02 x 10^23 molecules = 1 mol

4.18x10^20 molecules x (1 mol / 6.02x10^23 molecules) = 6.94x10^-4 moles

Then the Molar Mass is 12.01 + 16.00 = 28.01 g / mol

6.94 x 10^-4 moles CO x (28.01 g /mol) = 0.0194 g = 19.4 mg

The reaction is going from a strong acid and weak base to a weak acid and weak base, the direction of equilibrium will lie to the right, favoring the formation of the products (NH4+ and Br-).

Step 1: In an acid-base reaction, a proton (H+) is transferred from an acid to a base. In this case, HBr is the Brønsted-Lowry acid and NH3 is the Brønsted-Lowry base.

Step 2: To draw the products of the acid-base reaction, identify the conjugate acid of NH3 (the base). NH3 will gain a proton (H+) to form its conjugate acid, NH4+. HBr will lose a proton to form its conjugate base, Br-.

Step 3: To draw the curved arrow mechanism of the acid-base reaction, start by drawing NH3 and HBr. Draw a curved arrow from the lone pair of electrons on the nitrogen atom in NH3 to the hydrogen atom in HBr. This represents the donation of the electron pair from NH3 to HBr. Then, draw another curved arrow from the bond between the hydrogen and bromine atoms in HBr to the bromine atom, showing the breaking of the bond and the formation of Br-.

Step 4: To determine the direction of equilibrium, compare the strengths of the acid and base on both sides of the reaction. HBr is a strong acid, and NH3 is a weak base. Their conjugates, NH4+ and Br-, are a weak acid and a weak base, respectively. Since the reaction is going from a strong acid and weak base to a weak acid and weak base, the direction of equilibrium will lie to the right, favoring the formation of the products (NH4+ and Br-).

to learn more about strong acid click here:

brainly.com/question/28858976

#SPJ11

The statement "the usable free energy (per mol) for transduction when NADH oxidizes and 1/2 O2 reduces is 220 kJ/mol" is very close to the actual value, but not entirely accurate. The correct value is -219.5 kJ/mol.

The reaction you are referring to is the oxidation of NADH and the reduction of oxygen to form water. The overall reaction is:

NADH + 1/2 O2 -> NAD+ + H2O

The standard free energy change (ΔG°') for this reaction is -219.5 kJ/mol of NADH. Therefore, the maximum amount of usable free energy that can be obtained from the oxidation of NADH and the reduction of oxygen is 219.5 kJ/mol.

So, the statement "the usable free energy (per mol) for transduction when NADH oxidizes and 1/2 O2 reduces is 220 kJ/mol" is very close to the actual value, but not entirely accurate. The correct value is -219.5 kJ/mol.

Visit to know more about Free energy:-

brainly.com/question/27686274

#SPJ11

SiF4 has a more polar bond than SiBr4 due to the higher electronegativity .

The polarity of a bond depends on the difference in electronegativity between the atoms involved. Silicon has an electronegativity of 1.9, while fluorine and bromine have electronegativities of 3.98 and 2.96, respectively.

The bond in SiF4 is more polar because the difference in electronegativity between silicon and fluorine (2.08) is greater than that between silicon and bromine (1.06). The polar nature of SiF4 makes it a good candidate for use in various chemical reactions and industrial processes.

Understanding the polarity of molecules is crucial in predicting their behavior in chemical reactions and in designing new materials with desired properties

Learn more about polarity

brainly.com/question/30002497

#SPJ11

The reaction's net ionic equation will only include the species that change chemically. The net ionic equation is:

[tex]CO_3^{2-} (aq) + 2H^{+} (aq) = > H_2O (l) + CO_2 (g)[/tex]

Ionic equations are chemical equations that express the formulas of dissolved aqueous solutions as individual ions.

A chemical equation is used to express what we believe is happening in a chemical reaction. Writing net ionic equations is one of the most useful applications of the concept of principal species.

For the reaction of sodium carbonate ([tex]Na_2CO_3[/tex]) and hydrochloric acid (HCl), the balanced chemical equation is:

[tex]Na_2CO_3 + 2HCl = > 2NaCl + H_2O + CO_2[/tex]

In an aqueous solution, however, both sodium carbonate and hydrochloric acid dissociate into ions.

As a result, the net ionic equation for the reaction will only include the species that change chemically. The net ionic equation is as follows:

[tex]CO_3^{2-} (aq) + 2H^{+} (aq) = > H_2O (l) + CO_2 (g)[/tex]

Carbonate ions from sodium carbonate react with hydrogen ions from hydrochloric acid to form water and carbon dioxide gas, as shown by this net ionic equation.

To know more about the ionic equation visit:

https://brainly.com/question/13879496

#SPJ1

The associated wavelength of the electron is approximately 1.826 x [tex]10^{-8[/tex] cm. The correct option is (b).

To calculate the associated wavelength of an electron traveling at 4.0 x [tex]10^{-9[/tex] cm/s, you can use the de Broglie wavelength formula:
wavelength (λ) = h / (m * v)
where:
- λ is the wavelength
- h is the Planck's constant (6.626 x [tex]10^{-34[/tex] Js or 6.626 x [tex]10^{-27[/tex] erg.s)
- m is the mass of the electron (9.109 x [tex]10^{-31[/tex] kg or 9.109 x [tex]10^{-28[/tex] g)
- v is the velocity of the electron (4.0 x [tex]10^{-9[/tex] cm/s)

First, let's convert the Planck's constant and mass of the electron to cgs units:
h = 6.626 x [tex]10^{-27[/tex] erg.s
m = 9.109 x [tex]10^{-28[/tex] g

Now, we can use the de Broglie wavelength formula:
λ = (6.626 x [tex]10^{-27[/tex] erg.s) / [(9.109 x [tex]10^{-28[/tex]g) * (4.0 x[tex]10^9[/tex] cm/s)]
λ = 1.826 x [tex]10^{-8[/tex] cm

To know more about "de Broglie wavelength" refer here:

https://brainly.com/question/30404168#

#SPJ11

Rounding off to two significant figures, the answer is 104 mL, which is approximately equal to 0.104 L..

We can use Boyle's Law to solve this problem:

P1V1 = P2V2

where P1 and V1 are the initial pressure and volume, respectively, and P2 and V2 are the final pressure and volume, respectively.

Converting the initial pressure of 2.50 atm to units of mmHg:

2.50 atm x 760 mmHg/atm = 1900 mmHg

Substituting the given values into the equation and solving for V2, we get:

V2 = (P1V1)/P2 = (1900 mmHg x 25.0 mL) / 457 mmHg

V2 = 103.95 mL

Therefore, the volume of the gas that exerts a pressure of 457 mmHg is 103.95 mL.

Rounding off to two significant figures, the answer is 104 mL, which is approximately equal to 0.104 L.

Hence, the correct option is (e) 0.104 L.

Learn more about Boyle's Law

https://brainly.com/question/30367133

#SPJ4

When the volume of a closed vessel containing water and its vapor at equilibrium ([tex]H_{2}O[/tex](l) + heat ↔ [tex]H_{2}O[/tex](g)) is decreased, the correct answer is:
B. In order to restore equilibrium, more liquid water evaporates.

When the volume of a closed vessel containing water and its vapor at equilibrium, the system will try to restore equilibrium. If the volume is decreased, the system will try to increase the concentration of water vapor to restore equilibrium. When the volume decreases, the pressure inside the closed vessel increases.

According to Le Chatelier's Principle, the system will respond by shifting the equilibrium to the side with fewer gas particles to reduce the pressure. In this case, the system will shift toward the liquid water side, causing more liquid water to evaporate and restore equilibrium.

To know more about Le Chatelier's Principle:

https://brainly.com/question/15580182

#SPJ11

This is an exercise in Charles's Law which states that, at constant pressure, the volume of a fixed amount of gas is directly proportional to its absolute temperature. This means that when the temperature of a gas increases, its volume also increases, and vice versa, as long as the pressure remains constant.

V₁/T₁ = V₂/T₂

Where V₁ is the initial volume of the gas, T₁ is the initial temperature, V₂ is the final volume of the gas, and T₂ is the final temperature.

This law is one of the fundamental laws of thermodynamics and applies to any ideal or real gas. It is important to note that Charles's law only applies to situations where the pressure is held constant. If the pressure changes, other laws, such as Boyle's law or Gay-Lussac's law, must be used.

Charles' law has many practical applications, including measuring temperature using gas thermometers, determining the thermal expansion of materials, and understanding the behavior of gases under different conditions of temperature and pressure.

V₁/T₁ = V₂/T₂

It tells us that it cooled hydrogen from T1 = 373 K to T2 = 283 K. Since its new volume is 750.0 mL.

But before calculating the initial volume, we solve the formula, then:

V₁ = (V₂T₁)/T₂

Now that we have our formula cleared, we plug in the data and solve:

V₁ = (V₂T₁)/T₂

V₁ = (750.0 mL × 373 K)/(283 K)

V₁ = 988.52 mL

The original volume was 988.52 mL.

ヘ( ^o^)ノ＼(^_^ )If you want to learn more about chemistry, I share this link to complement your learning:

https://brainly.com/question/10885284

Particulate matter is a complicated combination of solid particles and liquid droplets in the air.

Industrial activities, transportation, and fossil fuel burning produce it. Composition, size, and other variables affect particulate matter's chemical reactions.

Particulate particles may react chemically in the atmosphere, including:

Oxidation: Particulate matter reacts with ambient gases like O2 and NOx to generate oxidised particles. Sulphate particles may arise from power plant and other SO2 emissions.

Nucleation: Atmospheric gases generate new particles. H2SO4 and NH3 gases may generate new particles.

Coagulation: Small particles mix to generate bigger particles. When microscopic particles hit and cling together, they generate bigger particles that settle more readily.

Photochemical reactions: Particulate matter exposed to sunlight undergoes photochemical reactions, forming new particles and changing their chemical makeup.

Learn more about Particulate matter, here:

https://brainly.com/question/15230454

#SPJ1