l am so confused is it right?

​

We have that for the Question "A 2kg book is held against a vertical wall. The coefficient of friction is 0.45. What is the minimum force that must be applied on the book, perpendicular to the wall, to prevent the book from slipping down the wal" it can be said that  the minimum force that must be applied on the book is

From the question we are told

A 2kg book is held against a vertical wall. The coefficient of friction is 0.45. What is the minimum force that must be applied on the book, perpendicular to the wall, to prevent the book from slipping down the wal

Generally the equation for the  Force  is mathematically given as

[tex]F=\frac{mg}{\mu}\\\\F=\frac{2*9.8}{0.45}\\\\[/tex]

F=44N

Therefore

the minimum force that must be applied on the book is

F=44N

For more information on this visit

https://brainly.com/question/23379286

The magnitude of the adhesive force allows the top block to remain

attached to the bottom when the blocks and the wire are balanced.

The option that must be true is; [tex]\mathbf{W_{bottom} = F_{adhesion}}[/tex]

Reason:

The tension exerted by the wire attached to the top block = T

Magnitude of the adhesive = [tex]F_{adhesion}[/tex]

Weight of the top block = [tex]W_{top}[/tex]

Weight of the bottom block = [tex]W_{bottom}[/tex]

Given that with the exertion of the tension, the two blocks remain at rest, we have;

The adhesive causes the bottom block to remain attached to the top block, we have;

Therefore, the magnitude of the adhesive force adds the bottom weight, to the top, weight, which gives;

The magnitude of the adhesive force = The weight of the bottom block

Therefore;

Learn more here:

https://brainly.com/question/18907970

Answer:

Wbottom=Fadhersion it was right on y test

Explanation:

Answer: (Sorry, but I don't know how to calculate mass)

1. 15 N

2. 0.4921 [tex]\frac{ft}{s^2}[/tex] (feet per second squared)

4. 150 N

5. 8.202 feet per second squared

Answer:

i dont understand sorry

Explanation:

I don't understand this question

could you please explain

Explanation:

Well ball on ramp .Which factors are affected?

So if we put the ball right above the centre of mass it can be best stabled

Answer:

Solubility in gasses and liquids increase as pressure increases. This is due to colligative properties. The nitrogen gas levels would increase the farther the diver dives due to the increase of pressure causing the solubility of the nitrogen to increase, thus increasing the amount of it as you go deeper in the ocean.

Explanation:

As they plummet down, the driver would be in more risk. The solubility of gases and liquids increases as pressure increases. This is due to the existence of colligative properties. The nitrogen gas levels grow when the diver descends further into the water due to increased pressure, which causes the nitrogen's solubility to rise, increasing the amount of nitrogen present.

Answer:

A siphon is a tube that allows liquid to travel upward, above the surface of the origin reservoir, then downwards to a lower level without using a pump. When a certain amount of water moves over the bend in the siphon, gravity pulls it down on the longer leg lowers the atmospheric pressure in the bend of the siphon.

Mark me as brainlest, please?

Explanation:

Answer:

140m 13 degree

Explanation:

yan po thank nalang po sa point

Answer:

mjm

Explanation:

What happens to most bones when we break theAlways include the steps and/or background required to get to the final answer. Let’s help other people understand and solve future problems on their own.

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\[/tex]

From the question

mass = 8 g

volume = 10 cm³

We have

[tex]density = \frac{8}{10} = \frac{4}{5} = 0.8 \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

v2^2 - v1^2 = 2 g s        fundamental formula

v2 = v1 + 2 g    = v1 + 19.8         increase in velocity in 2 sec

v1^2 + 39.6 v1 + 392 - v1^2 = 2 * 9.8 * 123.1 = 2412.76

v1 = (2412.76 - 392) / 39.6 = 51.03

v2 = 51.03 + 19.6 = 70.63

T = 70.63 / .8 = 7.207 sec     time to fall height of tower

S = 1/2 g T^2 = 4.9 * 7.207^2 = 254.5 m

(Note  v2^2 - v1^2 = 70.63^2 - 51.03^2 = 2385 m

2385 / (2 * 9.8) = 122 m (close to 123.1    as was given

The force is different because of the amount of weight applied so the answer is A

The force that makes a difference in the weight of each person is Gravitational. Correct option is B.

Gravitational force is a fundamental force of nature that exists between any two objects with mass. It's the force that keeps us and everything else on Earth anchored to its surface. This force is proportional to the mass of the objects involved and inversely proportional to the square of the distance between them.

For example, if you were standing on a bathroom scale, the reading on the scale represents the force of the Earth's gravity acting on your body, which is why it's often referred to as your "weight." The actual mass of an object remains constant regardless of its location, but its weight can vary depending on the strength of the gravitational field at different locations (e.g., the weight on the Moon would be less than on Earth due to the Moon's weaker gravitational pull).

To know more about Gravitational:
https://brainly.com/question/3009841

#SPJ3

Answer:

The use of a telescope is to see distant objects

Explanation:

For example: you can look through a telescope to see constellations and stars. Hope this helps <3

According to who.int,

"The UV region covers the wavelength range 100-400 nm and is divided into three bands: UVA (315-400 nm) UVB (280-315 nm) UVC (100-280 nm).Mar 9, 2016"

in short 100-400nm

Answer:

F

Explanation:

F is not a molecule, a molecule contains two or more cells. But F stands for fluorine, which I think is a singular cell.

Answer:

Explanation:

An analog signal has some feature that is a continuous function of the program material being transmitted. It may take on any of a range of values.

In radio, amplitude, frequency, or phase are features of the radio signal commonly modulated when transmitting an analog signal.

__

A digital signal has some feature that is a discrete function of the program material being transmitted. It may take on any of a specific set of values.

A digital radio signal typically uses some combination of amplitude, frequency, and phase to represent a discrete state being transmitted. Only specific values of these are used by the transmitter.

(The receiver generally has to deal with corruption of the signal by the transmission channel, so the received set of values may not correlate well with those intended at the transmitter. This is why error-correcting codes are often used with digital signal transmission.)

_____

Additional comment

Analog radio signals are generally transmitted using a carrier wave at a specific frequency (or in some specific frequency range, in the case of frequency modulation). Processing techniques may be used at the transmitter to limit the bandwidth used in the transmission. One commonly-used technique is to limit the transmitted spectrum to one side of the carrier wave frequency. (This is called "single side-band" radio.)

Digital signals offer the opportunity to transmit different bits of the information at different frequencies. Sometimes, "frequency hopping" is used, so that the transmitted carrier wave jumps around from one frequency to another in a predetermined pattern. The effect of this is to spread out the spectrum of the transmitted signal so that average power in any frequency band is significantly reduced. In fact, it may be indistinguishable from background noise, except by a receiver that tunes to the carrier wave in the predetermined frequency pattern.

Answer:

-2.68m/s²

Explanation:

To find acceleration use the formula:

acceleration = change in velocity ÷ time

Substitute in the values:

acceleration = -8.3 ÷ 3.1

acceleration = -2.67741.. ≈ -2.68m/s²

Hope this helps!

Answer:

The concentration of a chemical substance expresses the amount of a substance present in a mixture.

Another definition is that concentration is the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume.

Answer:

In chemistry, concentration is the abundance of a constituent divided by the total volume of a mixture. Several types of mathematical description can be distinguished: mass concentration, molar concentration, number concentration, and volume concentration.

Answer:

To show that magnets repel, you must place the strong and weak magnets to another magnet with their poles being both south or both north facing eachother.

To show they attract, place opposite poles near eachother.

Answer:C

Explanation:

For parallel connection

For series connection

Net resistance

Answer:

For example, one method for estimating the length of time it takes something to occur is to time it once using a stopwatch. You can reduce the uncertainty in this estimate by repeating the measurement and taking the average.

There are a lot of way to reduce the uncertainty however with real life sciences like quantum mechanics it will reveal more about the world and life if we have better measuring tools. Being precise is essential to understanding many parts of life.

Hope this helped! Have a great day!!!

Answer:

question 1 is centripetal acceleration question 2 is 4

Explanation:

centripetal acceleration basically is acceleration that only changes velocity but not speed, while for question 2, you divide 10 by 2.5

Answer:

Much magma is generated at a converging plate boundary where subduction is occurring.

Answer:

Is zero.

Explanation:

I legit just had this question on my homework.