Let w = { 9:,ber) with the standard operations in M22. Which of the following statements is true? W is not a subspace of Mzxz because it does not contain the zero matrix the above is true The 2x2 identity matrix is in W W is a subspace of M2x2. the above is true None of the mentioned

Answers

Answer 1

The correct statement is : W is a subspace of M2x2.

TO show that W is a subspace of M2x2, we need to verify that it satisfies the three properties of a subspace:

1. W contains the zero matrix:

The zero matrix in M2x2 is the 2x2 matrix with all entries equal  to zero, which is not in W . However , we can see that the matrix {0,0;0,0} can be obtained as the difference between two matrices in W: {9,0;0,0} -{0,ber;0,0} = {0,0;0,0}. So , W does contain the zero matrix.

2. W is closed under addition:

Let A and B be two matrices in W. Then, A ={9,0;0,0} + {0,ber;0,0} and B = {9,0;0,0} + {0,ber;0,0}, which is also in W. Therefore, W is closed under addition.

3. W is closed under scalar multiplication:

Let A be a matrix in W and c be a scalar. Then ,A = {9,0;0,0} + {0,ber;0,0}, and c A = c {9,0;0,0} + c{0,ber;0,0}.

Since {9,0;0,0} and {0,ber;0,0} are both scalar multiples of A, c {9,0;0,0} and c{0,ber;0,0} are also in W . Therefore , W is closed under scalar multiplication.

Since W satisfies all three properties of a subspace, we can conclude that W is a subspace of M2x2.

Learn more about Subspace : https://brainly.com/question/31140613

#SPJ11


Related Questions

What function is shown in the graph?
A)
y=-3X
B)
B
y = 3-X
0
y = 3x + 2
D)
y = 3* + 2

Answers

Answer:

5x

Step-by-step explanation:

got it right on edg

Han and Andre were comparing the miles they ran during one week of cross country practice Hantan 12 which was three times as much as Andre
How many they run together during the one week

Answers

Answer:

I don't know.

Step-by-step explanation:

An analyst Is forecasting net Income for Excellence Corporation for the next fiscal year. Her low-end estimate of net Income is $261,000, and her high-end estimate is $312,000. Prior research allows her to assume that net income follows a continuous uniform distribution. The probability that net income will be greater than or equal to $299,500 Is Multiple Choice 75.5% O o 24.5% 84.4% O O 41.6%

Answers

A net income forecast for Excellence Corporation is made by an analyst for the next fiscal year. Low-end estimate of net income is $261,000High-end estimate is $312,000. Net income follows a continuous uniform distribution. To find: The probability that net income will be greater than or equal to $299,500. In order to solve the problem, we need to calculate the probability that net income will be between $299,500 and $312,000.

Then, we will subtract it from the probability that net income will be between $261,000 and $312,000. This difference will give us the required probability. P(261000 <= X <= 312000) = (312000-261000) / (312000-261000) = 0.2P(299500 <= X <= 312000) = (312000-299500) / (312000-261000) = 0.55P(X >= 299500) = P(299500 <= X <= 312000) - P(261000 <= X <= 312000) = 0.55 - 0.2= 0.35 or 35%.

Thus, the probability that net income will be greater than or equal to $299,500 is 35%. Therefore, the answer is: 24.5%.

Know more about probability:

https://brainly.com/question/31828911

#SPJ11

9.20. set s = 2z = {2x : x ∈ z}, the set of even integers. prove that s is equicardinal with z.

Answers

To prove that the set S = 2Z = {2x : x ∈ Z}, the set of even integers, is equicardinal with Z, the set of all integers, we need to show that there exists a one-to-one correspondence (bijection) between the two sets.

A one-to-one correspondence between two sets exists if every element of one set is paired with a unique element from the other set, and vice versa.

Let's define a function f: Z -> S such that f(x) = 2x for every x ∈ Z.

This function assigns each integer x from Z to its corresponding even integer 2x in S.

To prove that f is a bijection, we need to show that it is both injective (one-to-one) and surjective (onto).

Injectivity: Suppose f(a) = f(b) for some a, b ∈ Z. Then, 2a = 2b. Dividing both sides by 2, we get a = b. Hence, f is injective.

Surjectivity: For every y ∈ S, y = 2x for some x ∈ Z. Choosing x = y/2, we have f(x) = 2x = y. Therefore, f is surjective.

Since f is both injective and surjective, it is a bijection. Thus, S and Z are equicardinal sets.

To learn more about equicardinal click on,

https://brainly.com/question/31423223

#SPJ4

6th grade math help me pleaseeee

Answers

Answer:

Meryann brought 6 friends to the party

Step-by-step explanation:

y=9x+24

24 is your constant because the cost for all the pizza won't change

9x will change, so x represents the number of friends she brought

and y will be 78 because it's the total amount of money

78=9x+24

all you have to do is solve this equation

54=9x

x=6

Answer:

Meryann had 6 friends at the party.

Step-by-step explanation:

Total cost = $78

Pizza cost = $24

1 Movie Ticket = $9

Movie Tickets = Total Cost - Pizza Cost

Movie Tickets = $78 - $24 = $54

No. of Friends = Movie Tickets ÷ Movie Ticket

No. of Friends = $54 ÷ $9 = 6

No. of Friends = 6

M is the midpoint of PQ. PM = 7x + 8 and MQ = 5x+ 20. Find the value of x.​

Answers

M is the midpoint, so PM and MQ are equal,
So you would do 7x+8=5x+20
Then it would be 2x = 12
So 12 / 2, which is 6
X = 6

3. Which property justifies rewriting
2r-7x
*(2-7) ?
OA. Associative property of multiplication
OB. Distributive property
OC. Commutative property of multiplication
O D. Associative property of addition

Answers

B distributive property

Mhanifa please help im almost done :)

Answers

Answer:

19)

9/4 = (r - 10)/r9r = 4(r - 10)9r = 4r - 405r = -40r = -8

20)

(x + 6)/x = 10/710x = 7(x + 6)10x = 7x + 423x = 42x = 14

21)

(n - 9)/(n + 5) = 7/47(n + 5) = 4(n - 9)7n + 35 = 4n - 363n = -71n = -71/3

22)

6/(b + 9) = 4/(b + 5)6(b + 5) = 4(b + 9)6b + 30 = 4b + 362b = 6b = 3

23)

8/3 = (v - 9)/(7v + 4)8(7v + 4) = 3(v - 9)56v + 32 = 3v - 2753v = - 59v = -59/53

24)

8/(5x - 4) = 6/(x + 5)8(x + 5) = 6(5x - 4)8x + 40 = 30x - 2422x = 64x = 64/22x = 32/11

A snow removal service in Minnesota is deciding to purchase a new snow removal machine. If they dont purchase the machine, they will make $20,000 if the winter is mild, 530,000 il it is typical, and $50,000 the winter is severe. If they purchase the machine, their profits for these conditions will be $30,000, 535,000 and $40,000, respectively. The probability of a mild winter is 0.3. a typical winter is 0.5 and a severe winter is 0.2. What is the EMV for no machine? 32000 34500 35000 31000

Answers

The Europay, Mastercard and Visa (EMV) for not purchase the snow removal machine is $31,000.

The expected monetary value (EMV) for not purchasing the snow removal machine is $31,000. This value is calculated by multiplying the probabilities of each winter condition by the corresponding profits and summing them up. The probabilities for a mild winter, typical winter, and severe winter are 0.3, 0.5, and 0.2, respectively.

The profits for each condition without the machine are $20,000, $530,000, and $50,000. By multiplying each profit by its probability and adding them together, we get the EMV of $31,000 for not purchase the machine.

In detail, the EMV is calculated as follows:

EMV = (Probability of Mild Winter * Profit for Mild Winter) + (Probability of Typical Winter * Profit for Typical Winter) + (Probability of Severe Winter * Profit for Severe Winter)

EMV = (0.3 * $20,000) + (0.5 * $530,000) + (0.2 * $50,000)

EMV = $6,000 + $265,000 + $10,000

EMV = $31,000

Therefore, the EMV for not purchasing the snow removal machine is $31,000.

Learn more about Probability: https://brainly.com/question/25839839

#SPJ11

The perimeter of a rectangular field is 298 yards. If the width of the field is 63 yards, what is its length?

Answers

Answer:

The length is 86 yards.

Step-by-step explanation:

63 is the width so,

63 + 63 = 126

Now subtract this from the total perimeter,

298 - 126 = 172

and divide by 2 because there are sides with the same length

172/2 = 86

The length is 86.

The points (x, 3) and (-1, -4) lie on the same line. If the slope of the line is 1, what is
the value of x?
A-3
B 1
C 6
D-6

Answers

Answer:

C)  6

Step-by-step explanation:

use slope formula:

(-4 - 3) / (-1 - x) = 1

cross-multiply:

-7 = -1 - x

-6 = -x

6 = x

A rectangle has a length of 2x + 1 and a width
of 5x - 4. Which expression best describes the
area of the rectangle?
F 7x - 3
H 10x2 – 3x - 4
J 10x2 + 13x - 4
G 14x - 6

Answers

Answer:

H

Step-by-step explanation:

The rectangle has a length of (2x + 1) and a width of (5x - 4).

And we want to select the expression that represents the rectangle's area.

Recall that a rectangle's area is simply its length multiplied by its width. Thus:

[tex]A=(2x+1)(5x-4)[/tex]

Expand by distributing:

[tex]A=(2x+1)(5x)+(2x+1)(-4)[/tex]

Distribute:

[tex]A=(10x^2+5x)+(-8x-4)[/tex]

Simplify:

[tex]A=10x^2-3x-4[/tex]

Hence, our answer is H.

A trapezoid has bases of lengths 38 and 52. Find the trapezoids area if it’s height is 8.

Answers

Answer:

360

Step-by-step explanation:


Using Matlab, include the code, a brief discussion of the
code/logic, graphs and screenshots with results, and a brief
analysis/discussion of the results.
4. Repeat exercise 3 using the Secant method. Repeat iterations until the approximate error becomes less than 0.1%. (20%] a. Which method is better? Secant or False-position?

Answers

The correct answer is The logic behind the Secant method is to iteratively update two initial guesses, x0 and x1, based on the function evaluations at those points. The formula x2 = x1 - (f(x1) * (x1 - x0)) / (f(x1) - f(x0)) is used to update the guesses and obtain a new approximation, x2

Here's an example MATLAB code that implements the Secant method to find the root of a function:

% Function to find the root of

function y = myFunction(x)

[tex]y = x^3 - 5*x^2 + 6*x - 2;[/tex]

end

% Secant method

x0 = 0; % Initial guess x0

x1 = 1; % Initial guess x1

approx_error = 1; % Initial approximation error

while approx_error > 0.001 % Set the desired approximation error threshold

[tex]x2 = x1 - (myFunction(x1) * (x1 - x0)) / (myFunction(x1) - myFunction(x0));[/tex]

[tex]approx_error = abs((x2 - x1) / x2) * 100; % Calculate the approximation[/tex]error

   x0 = x1;

   x1 = x2;

The logic behind the Secant method is to iteratively update two initial guesses, x0 and x1, based on the function evaluations at those points. The formula x2 = x1 - (f(x1) * (x1 - x0)) / (f(x1) - f(x0)) is used to update the guesses and obtain a new approximation, x2. The iteration continues until the approximation error, calculated as the absolute difference between x2 and x1 divided by x2, falls below the desired threshold (in this case, 0.001).

To compare the Secant method with the False-position method, you can apply both methods to the same function and compare their convergence and accuracy. You can also analyze the number of iterations required for each method to achieve a certain level of approximation error.

Please note that in order to generate graphs and screenshots with results, it would be best to run the code in a MATLAB environment and visualize the results directly.

Learn more about statistics here:

https://brainly.com/question/29765147

#SPJ11

The person who answers has an explanation that doesn't have a link, and isn't incorrect gets brainiest. Ok here is the question "What are the first 30 characters in pi aka ~3.141592653589793238462643383 is all I remember."

Answers

Answer:

3.14152628283829299348473929

what equation represents this sentence?
0.7 increased by a number is 3.8.

a. 3.8 n = 0.7
b. 3.8 + n, = 0.7
c. 3.8n = 0.7
d. 0.7 + n = 3.8

Answers

The equation that represents the sentence "0.7 increased by a number is 3.8" is d) 0.7 + n = 3.8

To understand why this equation is the correct representation, let's break it down. The phrase "a number" can be represented by the variable n, which stands for an unknown value. The phrase "0.7 increased by" implies addition, and the number 0.7 is being added to the variable n. The result of this addition should be equal to 3.8, as stated in the sentence.

Therefore, we have the equation 0.7 + n = 3.8, which indicates that when we add 0.7 to the unknown number represented by n, we obtain a value of 3.8. This equation accurately captures the relationship described in the sentence, making option d, 0.7 + n = 3.8, the correct choice.

To know more about equation refer here:

https://brainly.com/question/29657992

#SPJ11

One of the legs of a right triangle measures 12 cm and the other leg measures 13 cm find the measure of the hypotenuse if necessary round the nearest 10th

Answers

Answer:

17.7 cm

Step-by-step explanation:

One of the legs of a right triangle measures 12 cm and the other leg measures 13 cm find the measure of the hypotenuse if necessary round the nearest 10th

To find the Hypotenuse of a right angle triangle, we solve using Pythagoras Theorem

Hypotenuse ² = Opposite ² + Adjacent ²

Hypotenuse = √Opposite ² + Adjacent ²

Opposite = 12 cm

Adjacent = 13 cm

Hence,

Hypotenuse = √12² + 13²

= √144 + 169

= 17.691806013 cm

Approximately = 17.7 cm

Therefore, the measure of the Hypotenuse is 17.7 cm

Evaluate 3f(2) what is it

Answers

Answer:

the eanswer should be 12

Step-by-step explanation:

i took the test

You measure a wound to be 2.5 inches long. How many millimetres long is the wound? Round to the nearest tenth.

You measure the depth of a wound to be 0.25 inches. How many millimetres is this? Round to the nearest whole number.

Answers

(a) If you measure a wound to be 2.5 inches long, the corresponding length in millimeters is 63.5 mm.

(b) If you measure the depth of a wound to be 0.25 inches, the corresponding length in millimeters is 6.35 mm.

What is the measure of the lengths?

If you measure a wound to be 2.5 inches long, the corresponding length in millimeters is calculated as follows;

1 in = 25.4 mm

2.5 in = ?

? = 2.5 x 25.4 mm

? = 63.5 mm

If you measure the depth of a wound to be 0.25 inches, the corresponding length in millimeters is calculated as follows;

1 in = 25.4 mm

0.25 in = ?

? = 0.25 x 25.4 mm

? = 6.35 mm

Learn more about length measurement here: https://brainly.com/question/30275824

#SPJ4

Two discrete random variables have a joint PMF as described in the following table. PM (m, n) m = 1 2 m = 3 n=1 1/5 7/45 1/9 n = 2 8/45 4/45 2/45 n = 3 2/15 1/15 1/45 (a) Find the marginal PDFs, P(m) and Py(n). Р (b) Find Pr(N=1|M= 2). (c) Find Pr(MEN). (d) Find Pr(M>N).

Answers

a. P(1) = 0.3556, P(2) = 0.3111, P(3) = 0.0444; Py(1) = 0.5333, Py(2) = 0.4444, Py(3) = 0.1222 b. P(N = 1 | M = 2) ≈ 0.2574 c.P(M = 2, N = 3) ≈ 0.038 d.  Pr(M>N) = 0.5333.

a. The marginal probability function of m is given by P(m) = Σn P(m, n) and that of n is given by P(n) = Σm P(m, n).

Thus, the marginal PDFs are: P(1) = 1/5 + 8/45 + 2/15 = 0.3556 P(2) = 7/45 + 4/45 + 1/15 = 0.3111

P(3) = 1/9 + 2/45 + 1/45 = 0.0444 P(1) + P(2) + P(3) = 1 Py(1) = 1/5 + 7/45 + 2/15 = 0.5333

Py(2) = 8/45 + 4/45 + 1/15 = 0.4444 Py(3) = 2/15 + 1/15 + 1/45 = 0.1222 Py(1) + Py(2) + Py(3) = 1.

b. We need to find P(N = 1 | M = 2).

From the joint probability distribution table, we can see that P(N = 1, M = 2) = 8/45. P(M = 2) = 0.3111.

Using the conditional probability formula, P(N = 1 | M = 2) = P(N = 1, M = 2)/P(M = 2) = 8/45 ÷ 0.3111 ≈ 0.2574

c. We need to find the probability that M = E and N = N.

Since the two random variables are independent, we can simply multiply their probabilities: P(M = E, N = N) = P(M = E) × P(N = N).

The probability distribution of M is given by: M=1 with probability 0.3556 M=2 with probability 0.3111 M=3 with probability 0.0444

The probability distribution of N is given by: N=1 with probability 0.5333 N=2 with probability 0.4444 N=3 with probability 0.1222

Therefore, P(M = 2, N = 3) = P(M = 2) × P(N = 3) = 0.3111 × 0.1222 ≈ 0.038

d. We need to find P(M > N).

There are three possible pairs of values for (M, N) such that M > N: (M = 2, N = 1), (M = 3, N = 1), and (M = 3, N = 2).

The probabilities of these pairs of values are: P(M = 2, N = 1) = 1/5 P(M = 3, N = 1) = 1/9 P(M = 3, N = 2) = 1/15

Therefore, P(M > N) = P(M = 2, N = 1) + P(M = 3, N = 1) + P(M = 3, N = 2) = 1/5 + 1/9 + 1/15 = 0.5333.

Answer: a. P(1) = 0.3556, P(2) = 0.3111, P(3) = 0.0444; Py(1) = 0.5333, Py(2) = 0.4444, Py(3) = 0.1222 b. 0.2574 c. 0.038 d. 0.5333

Know more about  marginal probability here,

https://brainly.com/question/30075742

#SPJ11

please help, tysm if you do

Answers

Answer: It’s 3

Step-by-step explanation:

Hoped I help :)

Today i will walk 3 miles per hour to school, which is 1.5 miles away how many hours would this trip take

Answers

Answer: 30 minutes so 1/2 hour

Step-by-step explanation:

Because 3 miles = 1 hour

1.5 times 2 = 3

divide 2 on both sides

Answer:

2 hours

Step-by-step explanation:

divide3 by 1.5 and that is how long it will take you

People were polled on how many books they read the previous year. Initial survey results indicate that s = 13.6 books Complete parts (a) through (d) below. Click the icon to view a partial table of critical values. (n) How many subjects are needed to estimate the mean number of books read the previous year within six books with 90% confidence? This 90% confidence level requires subjects. (Round up to the nearest subject.)

Answers

Approximately 48 subjects are needed to estimate the mean number of books read the previous year within six books with 90% confidence.

To estimate the mean number of books read the previous year within a certain margin of error, we need to determine the sample size required. In this case, we want to estimate the mean with a 90% confidence level and a margin of error of ±6 books.

The formula to calculate the required sample size is given by:

n = (Z * σ / E)²Where:n = sample sizeZ = z-value (corresponding to the desired confidence level)σ = standard deviation (unknown in this case)E = margin of error

Since the standard deviation is unknown, we can use the initial survey result, s = 13.6 books, as an estimate for σ. However, this may result in a larger sample size than necessary.

Referring to the critical values table, we find the z-value corresponding to a 90% confidence level is approximately 1.645. Plugging in the values into the formula:

n = (1.645 * 13.6 / 6)²n ≈ 47.57

Since the sample size must be a whole number, we round up to the nearest subject. Therefore, approximately 48 subjects are needed to estimate the mean number of books read the previous year within six books with 90% confidence.

Learn more about sample size

brainly.com/question/30174741

#SPJ11

Janna is buying a netbook with a flash drive. The total cost c will include the price p of the netbook plus $12.50 for the flashdrive. Which is the dependent variable?

Answers

The dependent variable would be c (for cost) because the total cost depends on the price of the notebook.

Complete the Square of the quadratic equation in standard form: ax2 + bx + c Treat this like a literal equation where you are solving for x by completing the square. To get started, write the equation in the form: x2 + bx = ?

Answers

Answer:

x = [-b ±√(b² - 4ac)]/2a

Step-by-step explanation:

ax² + bx + c = 0

dividing through by a, we have

ax²/a + bx/a + c/a = 0

x² + bx/a + c/a = 0

x² + bx/a = -c/a

we now add th square of half the coefficient of x to both sides, thus

x² + bx/a + (b/2a)² = -c/a +  (b/2a)²

simplifying the left hand side and right hand side, we have

(x + b/2a)² = -c/a + b²/4a²

re-arranging, we have

(x + b/2a)² = b²/4a² - c/a

taking L.C.M of the right hand side, we have

(x + b/2a)² = (b² - 4ac)/4a²

taking square-root of both sides, we have

√(x + b/2a)² = ±√[(b² - 4ac)/4a²]

x + b/2a = ±√(b² - 4ac)/2a

So, x = -b/2a ±√(b² - 4ac)/2a

taking the L.C.M of the right hand side, we have

x = [-b ±√(b² - 4ac)]/2a

Suppose Lucy want to make sure that when she reaches into her drawer, she is certain to take out enough gloves so that she will have one matching pair to wear. HOW MANY GLOVES MUST SHE TAKE?

Answers

Answer:

its 2

Step-by-step explanation:

I have consulted many nice people ( my idiot friends) they all say 2 good luck








Using the part-whole meaning of a fraction, find the larger of each. Write down your explanation. 12 10 d. and and f. and 101 19

Answers

we can conclude that 12/17 is the larger fraction between 12/17 and 12/19 using the part-whole meaning of a fraction.

To determine which fraction is larger between 12/17 and 12/19 using the part-whole meaning of a fraction, we need to compare the sizes of the parts (numerators) relative to the wholes (denominators) for both fractions.

Let's consider the fractions 12/17 and 12/19:

For 12/17:

- The numerator, 12, represents a part of the whole.

- The denominator, 17, represents the total number of equal parts into which the whole is divided.

For 12/19:

- The numerator, 12, also represents a part of the whole.

- The denominator, 19, represents the total number of equal parts into which the whole is divided.

Since the numerators are the same (both 12) and we are comparing the fractions with the same numerator, the fraction with the smaller denominator represents larger parts or more significant portions of the whole.

Comparing the denominators, we can see that 17 is smaller than 19. This means that the whole in 12/19 is divided into fewer parts compared to the whole in 12/17. Therefore, each part of the whole in 12/17 is larger than each part in 12/19.

As a result, we can conclude that 12/17 is the larger fraction between 12/17 and 12/19 using the part-whole meaning of a fraction.

Learn more about Fraction here

https://brainly.com/question/30335970

#SPJ4

Find the derivative of f(x) = 8x + 4 at x = 9. (6 points)

Answers

Answer:

f(x) = 76

Step-by-step explanation:

All you do is plug-in for x: (x = 9)

f(x) = 8x + 4

f(x) = 8(9) + 4

f(x) = 72 + 4

f(x) = 76


For the following regression model Y = α + βX + u
-Explain how we can test if we adopt the wrong functional forms
of independent variables?

Answers

In order to test if we have adopted the wrong functional forms of independent variables in a regression model Y = α + βX + u, we can use diagnostic plots of the residuals.

Residuals are the differences between the actual values of the dependent variable and the predicted values of the dependent variable. We can plot the residuals against the independent variables to check if there is any functional form that has not been captured by the model, which would indicate that the model has adopted the wrong functional form of independent variables.

If there is no pattern in the residuals when plotted against the independent variables, then it can be concluded that the model has captured the correct functional form of the independent variables. However, if there is a pattern in the residuals, it would indicate that there is some functional form that has not been captured by the model, and we would need to explore different functional forms of the independent variables to see which one fits the data better. This can be done by using different functional forms of the independent variables, such as polynomial, logarithmic, exponential, etc., and comparing the results using various statistical tests.

To know more about regression model, visit:

https://brainly.com/question/31969332

#SPJ11

If the residuals are normally distributed, then it suggests that the functional form of the independent variable is correct. If they are not, then it suggests that the functional form of the independent variable is incorrect.Overall, it is important to test for the functional forms of independent variables to ensure that the results of the regression model are unbiased and accurate.

In a regression model, it is important to make sure that the functional forms of the independent variables are correct. If they are not, the results of the model may be biased and incorrect. There are several ways to test if the functional forms are correct or not. Below are some of the methods:Plotting the residuals against the independent variable: If the functional form of the independent variable is correct, then the residuals should be randomly distributed around zero, without showing any patterns. If there are patterns in the residuals, then it suggests that the functional form is incorrect. Testing for linearity: One way to test for linearity is by including the square or cubic terms of the independent variable in the model and testing their significance. If the squared or cubic term is significant, then it suggests that the functional form of the independent variable is incorrect. Testing for additivity: One way to test for additivity is by including interaction terms between the independent variables and testing their significance. If the interaction term is significant, then it suggests that the functional form of the independent variable is incorrect. Testing for normality: One way to test for normality is by examining the normal probability plot of the residuals.

To know more about normally distributed, visit:

https://brainly.com/question/15103234

#SPJ11

A part manufactured at a factory is known to be 12.05 cm long on average, with a standard deviation of 0.119. One day you suspect that that the part is coming out a little longer than usual, but with the same deviation. You sample 19 at random and find an average length of 12.25. What is the z-score which would be used to test the hypothesis that the part is coming out longer than usual?

Answers

Z-score is used to test the hypothesis that the part is coming out longer than usual. Z-score is defined as the number of standard deviations away from the mean.

It is calculated using the formula z = (x - μ) / σ, where x is the sample mean, μ is the population mean, and σ is the population standard deviation. In the given problem, the population mean is μ = 12.05 cm and the population standard deviation is σ = 0.119 cm. The sample mean is x = 12.25 cm. The sample size is n = 19.

Therefore, the formula to calculate the z-score is Z = (x - μ) / (σ / √n) Substituting the values, we get z = (12.25 - 12.05) / (0.119 / √19) ≈ 6.586Therefore, the z-score which would be used to test the hypothesis that the part is coming out longer than usual is approximately 6.586.

To know more about standard deviation refer to:

https://brainly.com/question/475676

#SPJ11

Other Questions
A 70.0 cm long wire is vibrating in such a manner that it forms a standing wave with three antinodes. (The wire is fixed at both ends.) (a) Which harmonic does this wave represent? first harmonic second harmonic third harmonic fourth harmonic none of the above (b) Determine the wavelength (in cm) of this wave. cm (c) How many nodes are there in the wave pattern? 1 2 3 4 none of the above (d) What If? If the wire has a linear mass density of 0.00500 kg/m and is vibrating at a frequency of 261.6 Hz, determine the tension (in N) in the wire. N Lutia asks her client victoria to examine times in her past when her problem was not as severe or nonexistent. lutia is most likely using a __________ therapy approach an object 3.0cm high object is place 4.0cm in front of a converging lens with a focal length of 8.0cm. the object is located on the principal axis.part 1. the image that will be formed will be . real, virtual or neither?part 2. the image will be loacted on the same side of the lens at a distance of __ from the lens?part 3. the magnification of the image will be ?part 4. the size of the image (in cm) will be ? What are the futuristic planning and it's implementation of Apple Inc !? Label each of the following as independent samples or paired (dependent) samples. A study was conducted to investigate the effectiveness of hypnotism in reducing pain. Eight subjects are asked to rate their pain level before and after a hypnosis session. [ Select ] ["Paired", "Independent"] 1 Which company responded to customer complaints and fixed its products before a regulatory agency became involved?ChryslerFordGMProcter & Gamble A merry-go-round moves in a circle at a constant speed. Is the merry-go-round accelerating? Explain your answer.Uniform Circular Motion:Uniform Circular motion is the motion of a body that moves at constant angular velocity. Some examples of bodies that move at uniform circular motion are the blades of a fan set at a constant setting and the motion of a compact disc while the player is on. Daily demand at a store is normally distributed with a mean of 100 units and a standard deviation of 30 units. The store opens 7 days a week. What is the standard deviation of the weekly demand combined? a) 265 b) 210 Oc) 79 d) 30 e) Non of the above Xtinct Artifacts has not paid a dividend during the past 10 years. However, at the end of this year, the company plans to pay a $1.50 dividend and a $2 dividend the following year (Year 2). Starting in three years, the dividend will begin to grow by 5 percent each year for as long as the firm is in business. If investors require an 11 percent rate of return to purchase Xtinct's common stock, what should be the market value of its stock today? Activities within a company that involve dealing with the union and its members are called ________. Consider the economy of Hicksonia in the previous question. Assume that the economy is described by the sticky-price model and that a half of the countrys firms have flexible prices while the others have sticky prices. a. Derive the SRAS and LRAS curves when Pe and Y are 2 and 1,100, respectively. Combine them with the AD curve you derived in the previous question in the AD-AS diagram and locate the long-run equilibrium point. b. Explain the short- and long-run adjustment processes when government purchases increase, using Keynesian cross, money market, IS-LM, labor market, AD-AS models and Phillips curve. For this question, you dont need to provide specific numbers for each variable. Circularity is used to achieve what application in the real world? a. Assembly (i.e shaft and a hole) b. Sealing surface (i.e engines, pumps, valves) c. Rotating clearance (i.e. shaft and housing) d. Support (equal load along a line element) Which of the following statements is true about plant evolutionary trends: A. Over time, spores have become less important in the plant life cycle. B. Over time, the sporophyte has become larger. C. Over time, the gametophyte has become smaller.ABCA, B, and C B and C functions of its products. All air conditioners must pass all tests before they can be v 17. An air-conditioner manufacturer uses a comprehensive set of tests to access the 200 air conditioners were randomly sampled and 5 failed one or more tests. Find the 90% confidence interval for the proportion of air-conditioners from the population the pass all the tests. Draw two rectangles on the grid with area 30 square units whose perimeters are different. What are the perimeters of your rectangles? Denver is a wealthy entrepreneur that owns several companies specialising in consumer products. One of them called, Hooga Niaga Bhd.Denver ventured into an agreement with Monicas company called Walred Sdn Bhd. This contract involved Walred Sdn Bhd, duty to engage relevant suppliers of pharmaceutical products, for Hooga Niaga Bhd.The specific terms of the contract between Hooga Niaga Bhd and Walred Sdn Bhd are as follows: Using the identities for sin (A + B) and cos (A+B) express sin (2A) and cos (2A) in terms of sin A and cos A. Also show that cos 3A = 4 cosA - 3 cos A = Major Topic TRIGONOMETRY Blooms Designation AP Score 7 b) The sum to infinity of a GP is twice the sum of the first two terms. Find possible values of the common ratio Major Topic Blooms Score SERIES AND SEQUENCE Designation 7 AN c) Integrate the following i. (cos(3x + 7)dx III. [3x(4x + 3)dx Which of the following nutrients are transported to the liver via the hepatic portal vein? Select all that apply. a.Fatty acids b.Monoacylglycerols c.Glucose d.Amino acids The production function of john business is Q = L + 1.5K where Q is the variable capturing the quantity of output produced, L is the variable measuring the units of labour hired and K is the variable measuring units of capital hired. Suppose also that the wage rate per unit of labour is $20 and the rental rate per unit of capital is $24. Given this information, answer the following questions.(i) In the long run, what is the input bundle that john should choose to produce 200 units of output? Show your working and explain your answer. What will be the associated minimum total cost of production?(ii) Diagrammatically represent john's chosen input combination carefully using an isoquant and an isocost line while keeping labour (L) on the horizontal axis. One optimized or maximized a task until its marginal benefit was equal to its marginal cost.Explain the economic logic behind the above statement by assuming that you are a business person who wants to make a profit from your business.