Let X be the temperature, measured in Celsius grades - on an island at noon in the summertime, and let y be the temperature - 12 hours later - at midnight on the same day. We assume that (X,Y) follows a 2-dimensional normal distribution, and E(X)=17, SD(X)=3, E(Y)=12, SD(Y)=2, and the correlation coefficient is r=0.8. 1. How much is the conditional expected value of Y on condition that X=17?

This is an example of a reflection.

The appropriate test to determine the association between gender and stress level at work is the Chi-Square test for independence.

The Chi-Square test for independence is used when we have categorical variables and want to determine if there is an association or relationship between them. In this case, the variables are gender (male or female) and stress level at work (not at all, somewhat, very).

The test will help us determine if there is a significant association between gender and stress level at work, or if any observed differences are due to chance.

To perform the Chi-Square test, we first need to organize the data into a contingency table, which shows the frequencies or counts of each combination of gender and stress level. We then calculate the expected frequencies under the assumption of independence between the variables.

The Chi-Square test statistic is calculated by comparing the observed and expected frequencies. Finally, we compare the test statistic to the critical value from the Chi-Square distribution with the appropriate degrees of freedom to determine if the association is statistically significant.

In summary, to determine if there is an association between gender and stress level at work, the appropriate test is the Chi-Square test for independence. This test will help us understand if there is a significant relationship between these variables or if any observed differences are due to chance.

To know more about the Chi-Square test refer here:

https://brainly.com/question/28348441#

#SPJ11

Answer:

14,520

Step-by-step explanation:

The computation is shown below:

Given that

Wesley walked 11 miles in 4 hours

Now we can say that

1 miles = 5280

So, 11 miles would be

= 5280 × 11

= 58,080

And, the number of hours is 4

So, for one hour he would be far of

= 58,080 ÷ 4

= 14,520

Answer:

19/15

Step-by-step explanation: In order to solve for A add 2/3 to both sides of the equation to get A alone and 2/3 + 3/5 is equal to 10/15 + 9/15 which means the answer is 19/15.

Answer:

No, sometimes it can just produce a similar image .

Can I get brainliest?

Step-by-step explanation:

Answer:

B

Step-by-step explanation:

The graph does not form a obvious line and therefore is the answer.

Answer:

The answer is B i got it right.

Step-by-step explanation:

Answer:

500043004030405.3

Step-by-step explanation:

Answer:

x+90°+130°=360°

x+220°=360°

x=360°-220°

x=140°

The statement "There are 68% data values within μ and μ+σ" is true. (option b).

The empirical rule states that approximately 68% of data values in a normal distribution lie within one standard deviation (σ) of the mean (μ). This means that if we consider the interval from μ to μ+σ, it will contain roughly 68% of the data values.

In summary, among the given statements, only statement b) is true. The empirical rule helps us understand the distribution of data values based on their distance from the mean (μ) in a normal distribution. It is important to remember that the rule provides approximate percentages and does not provide precise values for specific intervals.

To know more about normal distribution here

https://brainly.com/question/31226766

#SPJ4

Complete Question:

Which of the following statement(s) is/are TRUE about the number of data values that lie over an interval for normal distribution by using the empirical rule?

a) There are 71.5% data values within μ-σ and μ+20.

b) There are 68% data values within μ and μ+σ.

c) There are 50% data values within μ and ∞.

d) There are 50% data values within µ - 30 and μ.

e) There are 100% data values within μ-30 and μ+30.

The solution of the double integral  ∫∫r(10x+10y+100)dA is found to be  5937.5.

To calculate the double integral ∫∫r(10x+10y+100)dA over the region r: 0 ≤ x ≤ 5, 0 ≤ y ≤ 5, we can integrate with respect to x first and then with respect to y. Let's start by integrating with respect to x,

∫∫r(10x+10y+100) dA = ∫[0,5] ∫[0,5] (10x+10y+100)dxdy

Integrating with respect to x, we treat y as a constant,

= ∫[0,5] [(10x²/2) + 10xy + 100x] dx dy

Next, we integrate the expression [(10x²/2) + 10xy + 100x] with respect to x over the range [0,5],

= ∫[0,5] [(10x²/2) + 10xy + 100x] dx dy

= [5x³/3 + 5xy²/2 + 50x²] evaluated from x=0 to x=5 dy

= [(5(5)³/3 + 5(5)y²/2 + 50(5)²) - (5(0)³/3 + 5(0)y²/2 + 50(0)²)] dy

= [(125/3 + 125y²/2 + 250) - 0] dy

= (125/3 + 125y²/2 + 250) dy

Now, we integrate the expression (125/3 + 125y/2 + 250) with respect to y over the range [0,5],

= ∫[0,5] (125/3 + 125y²/2 + 250) dy

= [(125/3)y + (125/6)y³ + 250y] evaluated from y=0 to y=5

= [(125/3)(5) + (125/6)(5³) + 250(5)] - [(125/3)(0) + (125/6)(0³) + 250(0)]

= [625/3 + (125/6)(125) + 1250] - [0 + 0 + 0]

= 625/3 + 125/6 * 125 + 1250

= 625/3 + 15625/6 + 1250

= 2083.33 + 2604.17 + 1250

= 5937.5

Therefore, the double integral ∫∫r(10x+10y+100)dA over the region r: 0 ≤ x ≤ 5, 0 ≤ y ≤ 5 is equal to 5937.5.

To know more about double integral, visit,

https://brainly.com/question/27360126

#SPJ4

Answer:120

Step-by-step explanation:

Answer:

120

Step-by-step explanation:

khan

Answer:

6.5

Step-by-step explanation:

you take the sides all added up (which was 13in) and divided it by two

Answer: the answer is 18. Trust me. I know what I’m doing lol

Step-by-step explanation:

The general solution to the given differential equation using variation of parameters is:

[tex]y(x) = (-1/6x - 1/36 + c_5 + c_6e^{-6x})e^{3x} + (1/6x - 1/36 + c_7 + c_8e^{6x})e^{-3x}[/tex]

Question 1:

A) To solve the associated homogeneous differential equation, we consider xy" - 9xy = 0.

Dividing through by x gives us y" - 9y = 0, which is a second-order linear homogeneous differential equation with constant coefficients.

The characteristic equation is [tex]r^2 - 9 = 0[/tex].

Solving this equation, we find two roots: r = 3 and r = -3.

Therefore, the general solution to the homogeneous differential equation is [tex]y(x) = c_1e^{3x} + c_2e^{-3x}[/tex], where [tex]c_1[/tex] and [tex]c_2[/tex] are arbitrary constants.

B) To solve the given differential equation using variation of parameters, we assume the particular solution has the form [tex]y_p(x) = u_1(x)e^{3x} + u_2(x)e^{-3x}[/tex], where [tex]u_1(x)[/tex] and [tex]u_2(x)[/tex] are functions to be determined.

We find the derivatives of [tex]y_p(x)[/tex]:

[tex]y_p'(x) = u_1'(x)e^{3x} + u_2'(x)e^{-3x} + 3u_1(x)e^{3x} - 3u_2(x)e^{-3x}\\y_p''(x) = u_1''(x)e^{3x} + u_2''(x)e^{-3x} + 6u_1'(x)e^{3x} - 6u_2'(x)e^{-3x} + 9u_1(x)e^{3x} + 9u_2(x)e^{-3x}[/tex]

Substituting these expressions into the given differential equation, we have:

[tex]x(u_1''(x)e^{3x} + u_2''(x)e^{-3x} + 6u_1'(x)e^{3x} - 6u_2'(x)e^{-3x} + 9u_1(x)e^(3x) + 9u_2(x)e^{-3x}) - 9x(u_1(x)e^{3x} + u_2(x)e^{-3x}) = xe^{3x}[/tex]

Simplifying and collecting terms, we get:

[tex]x(u_1''(x)e^{3x} + u2''(x)e^{-3x}) + 6x(u_1'{x}e^{3x} - u_2'(x)e^{-3x}) = xe^{3x}[/tex]

To solve for [tex]u_1'(x)[/tex] and [tex]u_2'(x)[/tex], we equate coefficients of [tex]e^{3x}[/tex] and [tex]e^{-3x}[/tex] separately.

For the coefficient of [tex]e^{3x}[/tex]:

[tex]u_1''(x) + 6u_1'(x) = 1[/tex]

The auxiliary equation is r^2 + 6r = 0, with roots r = 0 and r = -6.

The complementary solution is [tex]u_1_c(x) = c_3 + c_4e^{-6x}[/tex], where [tex]c_3[/tex] and [tex]c_4[/tex] are arbitrary constants.

Using the method of variation of parameters, we assume [tex]u_1{x} = v_1(x)e^{-6x}[/tex], where [tex]v_1(x)[/tex] is a new unknown function.

We find [tex]u_1'(x) = v_1'(x)e^{-6x} - 6v_1(x)e^{-6x}[/tex].

Substituting these expressions back into the differential equation, we have:

[tex]v_1''(x)e^{-6x} - 12v_1'(x)e^{-6x} + 6v_1'(x)e^{-6x} - 36v_1(x)e^{-6x} = 1[/tex]

Simplifying, we get:

[tex]v1''(x)e^{-6x} - 6v1(x)e^{-6x} = 1[/tex]

To solve for v1'(x), we integrate both sides with respect to x:

∫[tex](v_1''(x)e^{-6x} - 6v_1(x)e^{-6x})dx[/tex] = ∫(1)dx

This gives us:

[tex]v_1'(x)e^{-6x} + 6v_1(x)e^{-6x} = x + c_5[/tex], where [tex]c_5[/tex] is an arbitrary constant.

Using integration by parts on the left-hand side, we have:

[tex]v_1(x)e^{-6x} = -1/6xe^{6x} - (1/36)e^{6x} + c_5e^{6x} + c_6[/tex], where [tex]c_6[/tex] is another arbitrary constant.

Therefore, the solution for the coefficient of [tex]e^{3x}[/tex] is:

[tex]u_1(x) = (-1/6x - 1/36 + c_5)e^{3x} + c_6e^{-3x}[/tex]

Similarly, for the coefficient of e^(-3x), we have:

[tex]u_2(x) = (1/6x - 1/36 + c7)e^{-3x} + c8e^{3x}[/tex], where c7 and c8 are arbitrary constants.

Finally, the particular solution to the given differential equation is:

[tex]y_p(x) = u_1(x)e^{3x} + u_2(x)e^{-3x} \\= ((-1/6x - 1/36 + c_5)e^{3x} + c_6e^{-3x})e^{3x} + ((1/6x - 1/36 + c_7)e^{-3x} + c_8e^{3x})e^{-3x} \\= (-1/6x - 1/36 + c_5 + c_6e^{-6x})e^{3x} + (1/6x - 1/36 + c_7 + c_8e^{6x})e^{-3x}[/tex]

This is the general solution to the given differential equation using variation of parameters.

To know more about general solution, refer here:

https://brainly.com/question/32062078

#SPJ4

Task 1.1 To calculate the product moment correlation coefficient, first we need to find the means of both data sets. The mean of the time is:

$$\bar{t} = \frac {20+22+24+25+27+28+29+31}{8} = 25.25$$

The mean of the number is: $$\bar{n} = \frac {1+3+4+4+2+4+3+3}{8} = 3$$Next, we need to find the standard deviation of both data sets.

We will use the following formulas: $$s_t = \sqrt {\frac {\sum (t - \bar{t2} {n-1}} $$$$s_n = \sqrt{\frac {\sum (n - \bar{n2} {n-1}} $$

Using these formulas, we find that the standard deviation of the time is approximately 4.172 and the standard deviation of the number is approximately 1.247.

Using the following formula to calculate the product moment correlation coefficient:

$r = \frac{\sum (t - \bar{t})(n - \bar{n})}{(n - 1)s_t s_n}$$r = \frac{(20-25.25)(1-3)+(22-25.25)(3-3)+(24-25.25)(4-3)+(25-25.25)(4-3)+(27-25.25)(2-3)+(28-25.25)(4-3)+(29-25.25)(3-3)+(31-25.25)(3-3)}{7(4.172)(1.247)}$$r = \frac{-7.5+1.5-1.245-0.25+2.205+1.215+3.465+2.995}{35.531} \approx. 0.521$

Therefore, the product moment correlation coefficient is approximately 0.521.

Task 1.2 The equation of the least squares regression line of the number of components on time can be found using the following formulas: $$b = \frac {\sum (t - \bar{t}) (n - \bar{n})} {\sum (t - \bar{t}) ^2} $$$$a = \bar{n} - b \bar{t}$$

Using these formulas, we find that: $$b = \frac{(20-25.25)(1-3)+(22-25.25)(3-3)+(24-25.25)(4-3)+(25-25.25)(4-3)+(27-25.25)(2-3)+(28-25.25)(4-3)+(29-25.25)(3-3)+(31-25.25)(3-3)}{\sum (t - \bar{t})^2}$$$$b \approx. -0.235$$$$a = \bar{n} - b \bar{t}$$$$a \approx. 8.439$$

Therefore, the equation of the least squares regression line of the number of components on time is: $$n = 8.439 - 0.235t$$

Task 1.3Using the equation of the least squares regression line, we can predict the number of components for an inspection time of 26 seconds. $$n = 8.439 - 0.235t$$$$n = 8.439 - 0.235(26) $$$$n \approx. 2.974$$

Therefore, we predict that the number of components for an inspection time of 26 seconds is approximately 2.974.

Task 1.4 To test the hypothesis that the inspection time should be the same for all outsourced components, we can use a one-way ANOVA test. We can set up the null hypothesis as follows: H0: μ1 = μ2 = μ3 = μ4 = μ5 = μ6 = μ7 = μ8where μi is the mean inspection time for the ith group of components, and the alternative hypothesis as follows: Ha: At least one mean is different

Using an ANOVA calculator, we find that the F-statistic is approximately 12.04 and the p-value is approximately 0.00036. Since this p-value is less than the significance level of 0.05, we reject the null hypothesis and conclude that there is evidence to suggest that at least one mean is different. Therefore, we can say that there is a correlation between inspection time and the number of components.

Task 1.5 To summarize the statistical data for non-technical colleagues, we can create a table or graph that displays the distribution of inspection times and the corresponding number of components. We can also include the mean, standard deviation, and correlation coefficient to provide a summary of the relationship between the two variables. Additionally, we can use the equation of the least squares regression line to make predictions about the number of components for different inspection times, which can help inform decision-making.

To know more about standard deviation refer to:

https://brainly.com/question/475676

#SPJ11

1. Probability of exactly 7 students majoring in STEM: is 0.1312

2. Probability of exactly 2 students needing another math class: is 0.3186

3. Probability of at most 2 students needing another math class: 0.0997

4. Probability of at least 2 students needing another math class: 0.9537

5. Probability of between 2 and 3 students needing another math class: 0.9829

6. Mean for the number of people with the genetic mutation: 24

7. Standard deviation for the number of people with the genetic mutation: 4.49

1. Probability of exactly 7 students majoring in STEM:

The probability of exactly 7 students majoring in STEM can be calculated using the binomial probability formula:

P(X = k) = (nCk) × ([tex]p^k[/tex]) × ([tex](1-p)^{(n-k)[/tex])

Where:

n = Total number of trials (34)

k = Number of successful trials (7)

p = Probability of success (25% or 0.25)

Plugging in the values:

P(X = 7) = (34C7) × ([tex]0.25^7[/tex]) × ([tex](1-0.25)^{(34-7)[/tex])

Using a calculator or statistical software, calculate P(X = 7) = 0.1312 (rounded to 4 decimal places).

2. Probability of exactly 2 students needing another math class:

The probability of exactly 2 students needing another math class can be calculated using the binomial probability formula:

P(X = k) = (nCk) × ([tex]p^k[/tex]) × ([tex](1-p)^{(n-k)[/tex])

Where:

n = Total number of trials (4)

k = Number of successful trials (2)

p = Probability of success (64% or 0.64)

Plugging in the values:

P(X = 2) = (4C2) × (0.64²) × ([tex](1-0.64)^{(4-2)[/tex])

Using a calculator or statistical software, calculate P(X = 2) = 0.3186 (rounded to 4 decimal places).

3. Probability of at most 2 students needing another math class:

To calculate the probability of at most 2 students needing another math class, we sum up the probabilities of exactly 0, 1, and 2 students needing another math class:

P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2)

Using the binomial probability formula as in the previous steps, calculate P(X ≤ 2) = 0.0997 (rounded to 4 decimal places).

4. Probability of at least 2 students needing another math class:

To calculate the probability of at least 2 students needing another math class, we subtract the probability of 0 students needing another math class from 1:

P(X ≥ 2) = 1 - P(X = 0)

Using the binomial probability formula, calculate P(X ≥ 2) = 0.9537 (rounded to 4 decimal places).

5. Probability of between 2 and 3 students needing another math class:

To calculate the probability of between 2 and 3 students needing another math class (inclusive), we sum up the probabilities of exactly 2 and exactly 3 students needing another math class:

P(2 ≤ X ≤ 3) = P(X = 2) + P(X = 3)

Using the binomial probability formula, calculate P(2 ≤ X ≤ 3) = 0.9829 (rounded to 4 decimal places).

6. Mean for the number of people with the genetic mutation:

The mean for the number of people with the genetic mutation can be calculated using the formula:

Mean = n × p

Where:

n = Total number of trials (600)

p = Probability of success (4% or 0.04)

Plugging in the values, calculate the mean = 600 × 0.04 = 24 (rounded to 2 decimal places).

7. Standard deviation for the number of people with the genetic mutation:

The standard deviation for the number of people with the genetic mutation can be calculated using the formula:

Standard deviation = √(n × p × (1 - p))

Where:

n = Total number of trials (200)

p = Probability of success (8% or 0.08)

Plugging in the values, calculate the standard deviation = √(200 × 0.08 × (1 - 0.08)) = 4.49 (rounded to 1 decimal place).

So, the mean for the number of people with the genetic mutation in groups of 600 is 24, and the standard deviation for the number of people with the genetic mutation in groups of 200 is 4.49.

Learn more about probability at

https://brainly.com/question/31828911

#SPJ4

Step-by-step explanation:

I can't read any of the things they are all in code :( I can answer the question in the comments. Also what is ne. I am so sorry!

Answer:

3/2

I hope this is correct

Answer:

3/2 = 1.5

Step-by-step explanation:

Find two corresponding sides whose lengths are given.

AB and WX

The scale factor from quad ABCD to quad WXYZ is the ratio of a length in WXYZ to the corresponding length in ABCD.

scale factor = 12/8 = 3/2 = 1.5

Answer:

C

Step-by-step explanation:

14/25=0.56 0.56x300=168

Based on the survey,

168 students like hip-hop music.

The ratio is a numerical relationship between two values that demonstrates how frequently one value contains or is contained within another.

Given:

Marty conducted a survey in his first period class to determine student preferences for music.

Out of 25 students, 14 like hip-hop music best.

That means, the ratio is 14/25 = 0.56.

There are 300 students in Marty's school.

Based on the survey,

the number of students = 300 x 0.56 = 168 students like hip-hop music.

Therefore, 168 students like hip-hop music.

To learn more about the ratio;

https://brainly.com/question/13419413

#SPJ6

Answer:

53%

53/100

Step-by-step explanation:

The correct alternative hypothesis is:

Ha: The proportion of children from the low-income group that did well on the test is not equal to the proportion of the high-income group who did well on the test.

The alternative hypothesis is what the researcher wants to test.

It is the opposite of the null hypothesis.
In other words, if the null hypothesis is rejected, the alternative hypothesis is accepted.

The null hypothesis (H0) states that there is no significant difference between the proportions of children from the low income group and the high income group who did well on the test.

The alternative hypothesis (Ha) states that there is a significant difference between the proportions of children from the low income group and the high income group who did well on the test.

Therefore, the correct alternative hypothesis is:

Ha: The proportion of children from the low-income group that did well on the test is not equal to the proportion of the high-income group who did well on the test.

To know more about proportion, visit :

https://brainly.com/question/1496357
#SPJ11

The eigenvalue problem (4.75-4.77) has no negative eigenvalues.

In the eigenvalue problem (4.75-4.77), we aim to show that there are no negative eigenvalues. To do this, we employ an energy argument.

First, we multiply the ordinary differential equation (ODE) by the eigenfunction y and integrate from p=0 to r=R. By applying integration by parts, we manipulate the resulting equation to obtain a boundary term. Utilizing the boundedness at r=0, we can show that this boundary term vanishes.

Consequently, this implies that there are no negative eigenvalues in the given eigenvalue problem.

By employing this energy argument and carefully considering the properties of the ODE, we can confidently conclude the absence of negative eigenvalues.

Learn more about eigenvalue

brainly.com/question/14415841

#SPJ11

Answer:

The answer is 5/8

Step-by-step explanation:

Answer:

A=3^1/5

Step-by-step explanation:

3^x = 3 ^ 1/5*3^5x. Basically you need 3^x to equal A^x. A^x is equal to A^5x in this situration. So, multiply 5x to equal 1x. To make 1x you need to multiply the 5x by 1/5. So, the A value is 3, since the whole number in the 3^x has to be equal to the whole number in A^x. Knowing this, we can tell that A must be equal to 3^1/5.

Answer:

3^1/5

The logarithmic expression can be written in the form Alog(s) + Blog(y), where A and B are integers or reduced fractions.

To express a logarithmic expression in the form Alog(s) + Blog(y), we need to understand the properties of logarithms and simplify the given expression.

The generic logarithmic expression can be written as log(b)(x), where b is the base and x is the argument. To write it in the desired form, we aim to express it as a combination of logarithmic terms with the same base.

First, let's consider an example expression: log(a)(x). We can rewrite it as (1/log(x))(log(a)(x)). Here, A = 1/log(x) and B = log(a)(x). Notice that A is the reciprocal of the logarithm of the base.

Similarly, for the expression log(b)(y), we can rewrite it as (1/log(y))(log(b)(y)). In this case, A = 1/log(y) and B = log(b)(y).

So, in general, for a logarithmic expression log(b)(x), we can express it as Alog(s) + Blog(y), where A = 1/log(x) and B = log(b)(x). These coefficients A and B can be integers or reduced fractions, depending on the specific values of the logarithmic expression and the chosen base.

Learn more about logarithmic expression here:

https://brainly.com/question/29194783

#SPJ11

Answer:

9/20

Step-by-step explanation:

If you fail to reject the null hypothesis in your experiment, indicating that there is no significant difference between the groups, there are several potential next steps you can consider. The appropriate next step depends on the specific goals and context of your study. Here are a few options:

Refine your analysis and adjust the alpha level: You can re-evaluate your statistical analysis and check if there are any potential issues or mistakes that could have influenced the results. You can also consider adjusting the significance level (alpha) to increase the chance of detecting significant differences if you believe it is justified. However, be cautious with this approach as it may increase the risk of Type I errors (false positives).

Conduct post-hoc tests or further analyses: If the overall analysis did not yield significant results, you can explore further by conducting post-hoc tests or additional analyses. This could involve comparing specific pairs of groups to identify any potential significant differences or examining other variables or dependent measures that may have an impact on the outcome.

Modify or reframe your hypothesis: If the results do not support your initial hypothesis, you may need to reconsider your hypothesis or research question. Explore alternative explanations, variables, or factors that could be influencing the outcome. This could involve formulating new hypotheses or exploring different angles for your study.

Review and refine your study design: Take a closer look at your experimental design, sample size, data collection methods, or other aspects of your study. Identify potential limitations or areas for improvement, and consider making adjustments or modifications for future studies.

Seek expert guidance or consultation: If you are uncertain about the next steps or need further guidance, it can be helpful to consult with experts or colleagues in your field. They may provide valuable insights and suggestions based on their expertise and experience.

In any case, it's important to approach the results objectively and make informed decisions based on the specific context and goals of your study.

Learn more about  hypothesis  problem here:

https://brainly.com/question/15980493

#SPJ11