Answer:
Fast-moving lava can kill people and falling ash can make it hard for them to breathe. They can also die from famine, fires and earthquakes which can be related to volcanoes. People can lose their possessions as volcanoes can destroy houses, roads and fields
Explanation:
What is a “jet stream"? What type of air does this one separate
Answer:
A jet stream is a type of air current that forms high in the atmosphere. On average, jet streams move at about 110 miles per hour. But dramatic temperature differences between the warm and cool air masses can cause jet streams to move at much higher speeds — 250 miles per hour or faster.
Explanation:
Jets streams play a key role in determining the weather because they usually separate colder air and warmer air. Jet streams generally push air masses around, moving weather systems to new areas and even causing them to stall if they have moved too far away.
What are the 3 types of revolutions?
Answer:
What are 3 Effects of the Neolithic agricultural revolution? Neolithic populations generally had poorer nutrition, shorter life expectancies, and a more labor-intensive lifestyle than hunter-gatherers.
Explanation:
hope this helps
when a magma body intrudes into a rock body and pieces of the original rock body end up in the magma they don't fully melt and are incorporated as xenolith inclusions. are the xenoliths younger or older than the magma body
Is if xenoliths are found in a molten body, this indicates that they were present before the magma body formed. The xenoliths should therefore be older than magma body, according to the law of exclusions.
Describe xenoliths.A rock fragment encased in another kind of rock is known as a xenolith. A xenolith is typically a rock that became embedded in lava as it cooled. The molten rock that spews forth as lava during one volcano eruption is known as magma.
How can a xenolith be recognized?The addition must have a distinct composition from the surrounding rock in order to qualify as a xenolith. Autoliths or homologous inclusions are rocks that have comparable inclusions within them. Xenoliths are typically simple to identify.
To know more about xenoliths visit:
https://brainly.com/question/28908458
#SPJ4
While spending the day relaxing on the beach, Keisha notices that the Sun appears to move across the sky. What is the best explanation for why this is happening?
answer choices
Earth's revolution
the Sun's revolution
the Sun's tilt on its axis
Earth's rotation on its axis
The best explanation for why the Sun appears to move across the sky is the Earth’s rotation on its axis. The correct answer is the last option.
What is Earth’s rotation?Earth's rotation or Earth's spin is the rotation of planet Earth around its own axis, as well as changes in the orientation of the rotation axis in space. The Earth rotates around its axis at a rate of about 1,600 kilometers (1,000 miles) per hour. It revolves around the sun at a rate of 107,800 kilometers (67,000 miles) an hour. Planets are not the only round objects which rotate. Amusement Park rides, such as Ferris wheels or carousels, also rotate.
Learn more about Earth’s rotation at: https://brainly.com/question/16455426
#SPJ4
How does the position of Polaris appear to change as an
observer travels due north from the Equator
Identify major centers of domestication of plants and animals.
Explain how plants and animals diffused globally.
Answer:
Southwest Asia, Southeast Asia, and the Americas.
Explanation:
Major centers of domestication of plants and animals are Southwest Asia which also known as the Fertile Crescent, Southeast Asia, and the Americas. Plants and animals diffused globally because of the interaction of different cultures with each other. When the two different cultures interact with each other through migration from one region to the new one, both cultures exchanges some of the ways of living and methods. When the English people came to the New world, they introduced cultivation of corn crop which leads to diffusion of plants in the America.
What process uses G3P?
Only one of the six G3P molecules created by the Calvin Cycle, which occurs every three cycles, is utilized to make glucose. To restart the Calvin Cycle, the remaining five molecules of G3P are needed to regenerate RuBP.
The Calvin cycle produces glyceraldehyde 3-phosphate or G3P. It is a three-carbon sugar that serves as the precursor to the creation of other carbs. However, part of this G3P is accessible for molecular synthesis and is utilized to produce fructose diphosphate. Some of this G3P is used to renew the RuBP to continue the cycle.
The Calvin cycle produces glyceraldehyde 3-phosphate or G3P. It is a three-carbon sugar that serves as the precursor to the creation of other carbs.
However, part of this G3P is accessible for molecular synthesis and is utilized to produce fructose diphosphate. Some of this G3P is used to renew the RuBP to continue the cycle.
To learn more about G3P
https://brainly.com/question/14014545
#SPJ4
How does G3P become glucose?
Two G3Ps are needed to make a glucose molecule with six carbons since a G3P molecule has three fixed carbon atoms. One molecule of glucose would need six cycles, or 6 CO2 start text, C, O, start subscript, 2, end text, end subscript, 18 ATP, and 12 NADPH.
According to the typical gluconeogenesis process, trioses (3-carbon sugars) are converted into glucose in plants. That is triose phosphate isomerase and aldolase convert glyceraldehyde phosphate to fructose-1,6-diphosphate, which is subsequently dephosphorylated to produce hexose phosphates.
Six Calvin cycles take place because it takes six carbon dioxide molecules to make one molecule of glucose. So, for the purpose of synthesizing one molecule of glucose, 12 molecules of 3-PGA are created during the carboxylation stage.
To learn more about G3P
https://brainly.com/question/14014545
#SPJ4
A certain species of dinosaur laid large numbers of eggs, and the hatchlings had high mortality early in life. But if they survived, the young dinosaurs were able to grow at a rapid pace and disperse into the environment in order to thrive. Based on this information and the graph above, which of the following best characterizes this species of dinosaur?
The dinosaurs were r-strategists and exhibited a Type I survivorship curve.
The dinosaurs were r-strategists and exhibited a Type III survivorship curve
The dinosaurs were K-strategists and exhibited a Type II survivorship curve.
The dinosaurs were K-strategists and exhibited a Type I survivorship curve.
The best characterizes that species of dinosaur is the dinosaurs were r-strategists and exhibited type III survivorship curve.
What is r-strategist and type III survivorship curve?R-strategist it mean the dinosaur is living in unstable environments. Since they living in unstable environments, they will laid large numbers of eggs to stabilize their community because they also have high mortality in early stage of life because the unstable environments.
The high mortality in early stage of life also indicate the type III survivorship curve which have characteristics that only few living organism in their adult live and get older because the greatest mortality in early stage of life.
Thus, the species of dinosaur that have those characterizes is r-strategist and exhibited type III survivorship curve.
Learn more about survivorship curve here:
brainly.com/question/14819583
#SPJ4
the mineralized remains of organisms and the rock layers in which they are found____
Correct answer is :- fossils
The preserved remains, or traces of remains, of extinct animals are called fossils. The remains of the organism itself are not fossils! They're rocks. An full organism or only a portion of one can be preserved as a fossil. Leaves, feathers, shells, bones, and shells can all turn into fossils. Fossils come in a wide range of sizes. Only a microscope can see microfossils. Microfossils include pollen and bacteria. Macrofossils can weigh several tons and measure many meters in length. Petrified trees or dinosaur bones are examples of macrofossils.
know more about fossils here
https://brainly.com/question/19676397#
#SPJ4
Answer: The answer is Fossil Record
Explanation: The mineralized remains of organisms and the rock layers in which they are found, showing when and where long-dead organisms lived and how their bodies were structured is Fossil Record
Fossil Record is the record of the occurrence and evolution of living organisms through geological time as inferred from fossils.
Hope this was helpful
The excessive pumping of groundwater from wells can influence the water levels below ground. which of the following is more likely to occur in aquifers in coastal areas than in aquifers in other regions?
The excessive pumping of groundwater from wells can influence the water levels below ground. They are likely to occur in aquifers in coastal areas than in aquifers in other region of Saltwater intrusion into the aquifers. Thus the correct option is B.
What importance does the water level have?Systematic monitoring of water levels is required in order to study resource changes over time and to plan, implement, and evaluate the success of groundwater management and preservation initiatives.
The excessive pumping of groundwater from wells can have an impact on subsurface water levels. In order to draw water from the soil, a well that extends below the water table must be pumped.
As a result, choice B is appropriate.
Your question is incomplete but most probably your full question was
The excessive pumping of groundwater from wells can influence the water levels below ground. Which of the following is more likely to occur in aquifers in coastal areas than in aquifers in other regions?
A) Upward movement of the water table
B) Saltwater intrusion into the aquifers
C) The formation of a cone of depression
D) An increased rate of recharge from precipitation
Learn more about the water level, here:
brainly.com/question/13781023
#SPJ4
Which location has the greatest pressure and coldest temperatures?
The Ocean Floor
A. What different empires, states, and kingdoms held power in West Africa over the centuries?
Answer: The Ghana Empire, Mali Empire, Songhai Empire, the sundaic kingdoms and, the Hausa states.
Explanation: Hope this helps. :))
What is a point that is mapped to itself by the function?
Transformation is a point that is mapped to itself by the function.
Thus, to display the distribution of the variable, geographic space itself is twisted, sometimes greatly. In fact, some forms might be better referred to as diagrams because it is one of the most figurative types of maps. They are typically employed as nomographs for analysis and emphasis display. In general, a function is a rule that produces an output set from an input set. What it means to "map" is as follows. In essence, it means that a known set of inputs will be used to generate the set of outputs using the function.
To learn more about maps, click at:
https://brainly.com/question/19130581
#SPJ4
The type of map above is a thematic map showing a pattern that is happening across part of the Earth’s surface. Which kind of map is shown in the image above?
A.
a physical map
B.
a special purpose map
C.
a topographical map
D.
a political map
Answer:
B
a special purpose map
What is Agricultural Revolution example?
Answer:
What are 3 Effects of the Neolithic agricultural revolution? Neolithic populations generally had poorer nutrition, shorter life expectancies, and a more labor-intensive lifestyle than hunter-gatherers.
Explanation:
hope this helps
mark me brainliest
Choose the letter of the correct answer.
I. _______ is the changing of a liquid to a gas.
a. Evaporation
b. Precipitation
c. Saturation
d. Transpiration
II. _____ is the changing of a gas to a liquid.
a. Evaporation
b. Condensation
c. Saturation
d. Precipitation
III. Rain, snow, sleet, and hail are forms of _____.
a. groundwater
b. condensation
c. transpiration
d. precipitation
IV. A rock layer filled with water is a(n) _____.
a. aquifer
b. groundwater
c. water cycle
d. sinkhole
V. _____ are condensed water vapor.
a. Clouds
b. Pollutants
c. Springs
d. Phosphates
VI. _____ is underground water that supplies wells and springs.
a. Pollution
b. Condensation
c. Hydrologic cycle
d. Groundwater
VII. The contamination of the environment with waste is called _____.
a. pollution
b. runoff
c. transpiration
d. groundwater
VIII. The temperature at which water vapor condenses is the _____.
a. aquifer
b. dew point
c. runoff
d. water cycle
IX. Water in a gaseous state is _____.
a. groundwater
b. hard water
c. soft water
d. water vapor
X. All of Earth's water is called the _____.
a. water cycle
b. hydrologic cycle
c. dew point
d. hydrosphere
XI. A formation of hot water erupting periodically from the ground is _____.
a. water cycle
b. artesian well
c. aquifer
d. geyser
XII. The water entering a river or stream during and after rainfall is _____.
a. soft water
b. runoff
c. hard water
d. condensation
XIII. Rainwater that does not contain dissolved minerals is _____.
a. saltwater intrusion
b. transpiration
c. soft water
d. hard water
Answer:
I. Evaporation
II. Condensation
III. Precipitation
IV. Aquifer
V. Clouds
VI. Groundwater
VII. Pollution
VIII. Dew Point
IX. Water Vapor
X. Hydrosphere
XI. Geyser
XII. Runoff
XIII. Soft Water
I hope this helped, for me this was a quick review.
which of the following is not a piece of evidence scientists have found indicating that liquid water once existed on mars? select one: a. meandering run-off channels and canyons carved by flowing water b. martian rocks and minerals that form in the presence of water c. parallel grooves in channels that appear to have been carved by strong currents d. ice flows cascading down mars' active volcanic clopes
The slopes of active Martian volcanoes appear to have been covered with ice and debris flows, and the mineral jarosite, which is considered to have developed in the presence of water, is found in Martian rocks. This undiscovered evidence suggests that there was once liquid water on Mars. Here, choices B and D are the right ones.
On Mars, meanders do exist, but they are not the result of water. Lava-like volcanic flows were what gave rise to it. Researchers came to the conclusion that water was really a significant component in the development of this mineral from the minerals they had isolated from the salt deposits that were present. It's called jarosite.
Additionally, the radar picture demonstrates that ice and debris are in fact extant and were formerly a component of large glaciers. The most important example is this one since radars can readily pick it up. Therefore, the finest instances of this identification of water on Mars are the glaciers and the minerals.
To learn more about mars
https://brainly.com/question/29186894
#SPJ4
Explain whether this event contributed to more centripetal or centrifugal forces
What are ideology examples?
Ocean acidification is responsible for damaging worldwide. O Boats and ships O Fishing nets O Coral reefs O Sand dunes O Beachfronts
Coral reefs are being harmed all around the world by ocean acidification. A coral reef is an underwater ecosystem that is made up of corals that construct reefs.
A coral reef is an underwater ecosystem that is made up of corals that construct reefs. Coral polyp colonies are bound together on reefs by calcium carbonate. [1] The majority of coral reefs are composed of stony corals, whose polyps gather together.
In the animal phylum Cnidaria, which also contains sea anemones and jellyfish, coral is a member of the class Anthozoa. For support and protection, corals secrete hard carbonate exoskeletons, unlike sea anemones. In warm, shallow, clear, bright, and agitated water, most reefs thrive. At the beginning of the Early Ordovician, 485 million years ago, coral reefs made their first appearance, replacing the Cambrian's microbial and sponge reefs.
Learn more about coral reef here
https://brainly.com/question/15794949
#SPJ4
A necessary ingredient for acid rain to occur is __________.
a. air pollution
b. heat pollution
c. runoff pollution
d. water pollution
Correct answer is :- Air pollution
When sulfur dioxide (SO2) and nitrogen oxides (NO2) are released into the atmosphere, they are carried by wind and air currents and eventually form acid rain. Acids made of sulfuric and nitric compounds are produced when the SO2 and NOX react with oxygen, water, and other substances. Before dropping to the ground, they then combine with water and other substances.
While volcanic eruptions and other naturally occurring processes do provide a minor amount of the SO2 and NO2 that create acid rain, fossil fuel combustion accounts for the majority of it.
know more about air pollution here
https://brainly.com/question/22242558#
#SPJ4
Answer: The answer is A Air pollution
Explanation: Air pollution is a necessary ingredient for acid rain to occur.
Air pollution is contamination of the indoor or outdoor environment by any chemical, physical or biological agent that modifies the natural characteristics of the atmosphere. Household combustion devices, motor vehicles, industrial facilities and forest fires are common sources of air pollution.
Hope this was helpful
along the shore, sediment tends to be carried downcurrent in a zigzag pattern. why is this? selected answer will be automatically saved. for keyboard navigation, press up/down arrow keys to select an answer. a breakwaters cause sediment to move in a zigzag pattern b groins cause sediment to move in a zigzag pattern c beach drift carries sediment in a zigzag pattern d rip tides carry sediment in a zigzag pattern
Sediment is frequently transported in a zigzag pattern by beach drift, which is a downcurrent process.
Why is sediment essential and what is it?Particles (such as sand or other soils) that settle or are deposited mostly on sides & bottom of bodies of water are referred to as sediment. It contributes to the construction of sand bars, beaches, spits, and estuaries and serves as a substrate for aquatic life.
How are sediments created?Rocks and possibly even mountains deteriorate in sediments such as sand or mud as a result of erosion and weathering. Chemical weathering commonly called dissolution—is one type of weathering. By washing it in mildly acidic water, this method gradually eliminates stone. For relatively young sedimentary rocks, these three processes produce the necessary components.
To know more about sediment visit :
https://brainly.com/question/29240254
#SPJ4
What are the 3 main components of warming up?
Answer:
1.Whole body
2.Stretching & major muscle groups
3.Activity using equipment
Explanation:
These are 3 components of warming up
What is light characterized as?
The characteristics of light are as follows. Light is an electromagnetic wave that propagates in a straight line in a process known as rectilinear propagation of light. Light is also a transverse wave, meaning that its particles move in the opposite direction to the direction of the wave's propagation.
Actually, radiation, which is defined as energy that moves as electromagnetic waves, includes visible light. Another way to think of it is as a continuous flow of particle-like "wave-packets," or photons, that move at the speed of light (about 300 000 kilometers per second).
The energy that moves in waves is called light. Many of the characteristics of light are determined by its length or wavelength. For instance, the wavelength determines the color of light and its interaction with matter.
To learn more about light
https://brainly.com/question/13349357
#SPJ4
What percentage of Africans live in sub-Saharan Africa?
Answer:
its B
Explanation:
the correct answer is around 47% which is closest to 50%
What are 5 things to identify a burn?
Blisters, pain, swelling, white or burned (blackened) skin, and peeling skin are the five signs of a burn.
A bubble of clear fluid under the skin known as a burn blister grows when the body attempts to protect a damaged region. Blisters that form as a consequence of persistent friction, rashes, or squeezed skin are not the same as burn blisters.
Dry heat, such as that produced by an iron or fire, can result in a burn. Something moist, like steam or hot water, can scorch you. Burns may result in skin that is red or peeling and can be highly painful.
The fluid that leaks from blood arteries and accumulates around injured tissues is what causes the swelling. Within an injury, swelling often starts to subside after 48–72 hours.
To learn more about burn
https://brainly.com/question/29538270
#SPJ4
what type of airfoil would you use for the wing? why?
Identical to those seen on high-performance F3B versions.
Why utilize this particular airfoil type?In theory, any airfoil can be used with flying wings and tailless model aircraft. But the airfoil needs to be carefully chosen if performance is a concern, as it is while competing. If the torsion moment of the airlift is balanced by the right ratio of wing sweep and twist, it is conceivable to employ the same airfoils that are used on high-performance F3B aircraft. The performance loss caused by sweep and twist can be reduced by selecting airfoils with moment coefficients cm c/4 that are near to zero.
In designing the MH 40 series and MH 60 series airfoils, the primary objectives were to (a) achieve low drag values comparable to typical airfoils used on F3B models, (b) cause only small torsion coefficients cm c/4, and (c) improve the maximum lift coefficient compared to existing, low cm c/4 airfoils.
To know more about airlift, visit:
https://brainly.com/question/15059896
#SPJ1
What are the 5 golden rules of food safety?
The Five golden rules for Safer Food are: keep clean; separate raw and cooked; cook thoroughly; keep food at safe temperatures; and use safe water and raw materials.
1. Keep it Clean
WHO emphasizes that clean cooking practices must be followed in all circumstances. Unhygienic cooking practices can transfer dangerous microbes to your hands, cleaning cloths, kitchen utensils, and especially cutting boards. So have separate cutting boards for vegetarians and non-vegetarians. Also, be sure to wash and sanitize all surfaces and utensils before cooking.
2. Separate raw and cooked foods
Separating raw and cooked foods greatly reduces the risk of cross-contamination. Bacteria from raw foods can be transferred to hands and directly onto countertops, clothing and utensils before finally being transferred to heated foods.
3. Cook thoroughly
Proper cooking kills almost all microbes. Eating hot, glowing food is important because it has a low bacterial count. If the temperature drops below 70 degrees, the number of microorganisms increases significantly. Additionally, you should be careful not to cook food for too long. Otherwise, the nutritional value will be lost. The preferred cooking method to preserve nutritional value is steaming.
4. Keep food at safe temperatures
This means keeping the temperature at a level that minimizes or eliminates the number of bacteria. This temperature is about 60 degrees above and about 5 degrees below. It is important to keep food at safe temperatures and not store cooked food for long periods of time. Also, when consuming preserved food, heat it sufficiently (100°C) before consuming it. To prevent food poisoning, we recommend minimizing refrigeration of cooked foods and keeping cooked foods at room temperature for long periods of time.
5. Use safe water and raw materials
Always use clean water for cooking. Good safety practices include using clean water, choosing fresh and healthy foods, and choosing foods that have been processed for safety.
To learn more about food safety click here:
https://brainly.com/question/16360633#
#SPJ4
the floor of death valley is about two miles lower than the mountain peaks around it. how did this happen? group of answer choices the valley was carved two miles deep by a prehistoric river, much in the same way that the colorado river carved the grand canyon. the elevation difference between the peaks and valley was once much larger than two miles, but the valley floor has been rising as it is inflated by lava from below. the valley floor has
The valley floor has dropped by more than two miles relative to the mountains, but erosion has removed the tops and the sediment produced has partially filled the valley, leaving an elevation difference of two miles.
How are valleys produced by plate boundaries?When plates move apart, they create divergent plate borders, which are related to the rift valley development. Mountains are likely to be formed as a result of the movement of convergent plate boundaries toward one another and pressing against one another.
What is the difference in elevation?The difference in elevation, which is akin to what you have studied as the difference in height, is the vertical distance between two places (see Section 5.0). Leveling is a fundamental operation in topographical surveys that measures variations in height.
To know more about elevation difference, visit:
brainly.com/question/2521211
#SPJ4