MAPP gas, natural gas, propane, and acetylene can be used with oxygen to cut metal.
True
False

Failure modes and effects analysis tabulates risk priority codes based on:

severity, occurrence, and detection

The 3 factors for Risk Priority Code in FMEA are Severity (S): measuring impact on tech, business, and customers. Severity is measured via qualitative or numerical scales.

The Likelihood or frequency of failure. Occurrence is evaluated using historical data, expert judgment or statistical analysis and can be rated on a scale from 1-10, with higher numbers indicating more frequent occurrences.

Learn more about Failure modes  from

https://brainly.com/question/16201340

#SPJ4

Answer:

1791 secs  ≈ 29.85 minutes

Explanation:

( Initial temperature of slab )  T1 = 300° C

temperature of water ( Ts ) = 25°C

T2 ( final temp of slab ) = 50°C

distance between slab and water jet = 25 mm

Determine how long it will take to reach T2

First calculate the thermal diffusivity

∝  = 50 / ( 7800 * 480 ) = 1.34 * 10^-5 m^2/s

next express Temp as a function of time

T( 25 mm , t ) = 50°C

next calculate the time required for the slab to reach 50°C at a distance of 25mm

attached below is the remaining part of the detailed solution

The most important reason to use 2 compressors in a cascade system is to: Divide the cooling load between 2 compressors. (Option D)

In a cascade system, two compressors are used to distribute and share the cooling load.

By dividing the workload between the compressors, each compressor operates at a more manageable capacity, enhancing overall system efficiency and performance.

This approach allows for better control, reliability, and optimized cooling capacity distribution in the cascade refrigeration system.

Learn more about compressors  at:

https://brainly.com/question/30404542

#SPJ1

Answer:

industrial engineering

Explanation:

In the light of today's world of global development teams, the factor that affects team structure and has the greatest impact is the degree to which the problem can be modularized. This statement is in option c.

Modularization refers to the process of decomposing a system into several smaller modules or subsystems, each with its own interface, that can be developed and maintained independently of one another. This modularization aids in the management of complexity, reduces risk, improves productivity, and speeds up development. It also allows the allocation of development to various teams based on module division.

Importance of Modularization:

Improved efficiency: Modularization can help with the division of tasks, which can improve efficiency and speed up the development process.

Risk Reduction: Modularization minimizes the likelihood of a single failure bringing down the entire system. If a module fails, it will only affect that module, not the entire system.

Improved scalability: Modularization can aid in the creation of large, complex systems that can be easily scaled up or down.In conclusion, The degree to which the problem can be modularized is the factor that affects team structure and has the greatest impact in the light of today's world of global development teams.

Learn more about modularized here:-

https://brainly.com/question/13948481
#SPJ11

The given plan shows the layout of shear walls labeled as A, B, C, D, and E, along with a rigid diaphragm.

It is mentioned that a lateral load with a magnitude of P = 360,000 pounds (lb) is applied along the edge of Wall C.

To determine the lateral force resisted by Wall C, we need additional information such as the distribution of the lateral load among the walls or any other relevant factors. Without this information, we cannot accurately calculate the specific force resisted by Wall C.

However, it's important to note that in a building structure, the distribution of lateral forces among shear walls is typically based on factors like their relative stiffness, location, and overall structural design. The force distribution may not solely depend on the location of the applied load.

To accurately determine the lateral force resisted by Wall C or any other wall, it is necessary to consider the specific design and engineering calculations based on the structural analysis and load distribution criteria for the given building or project.

Learn more about diaphragm here

https://brainly.com/question/31185329

#SPJ11

To create a navigation menu with links to each page, you can use HTML <a> tags within an unordered list <ul>.

Here's an example of how you can create the navigation menu:

<ul>

 <li><a href="start.html">Home</a></li>

 <li><a href="products.html">Products</a></li>

 <li><a href="blog.html">Contact us</a></li>

</ul>

Each <li> element represents a list item, and within it, the <a> tag is used to create a hyperlink. The href attribute specifies the URL of the corresponding page.

Please note that the provided code snippet is a sample implementation. Make sure to replace "start.html", "products.html", and "blog.html" with the actual file names or URLs of your webpages.

Once you add this code to your webpage, you should see a navigation menu with the links to the specified pages: "Home", "Products", and "Contact us".

Learn more about navigation here

https://brainly.com/question/30633995

#SPJ11

The correct option is a. The Kingsbury Agreement.

The Kingsbury Agreement allowed third party mechanical devices to be attached directly on AT&T telephone sets. The Kingsbury Agreement is an agreement between the Bell System and the United States Department of Justice, under which the Bell System agreed to divest itself of its local exchange service operating companies. It was signed in 1982. AT&T had agreed to divest itself of its local exchange service operating companies as part of the settlement of an antitrust lawsuit against the company.The agreement also allowed for the manufacture of third-party devices that could be attached to AT&T telephone sets, providing a new market for companies that had previously been shut out of the telecommunications industry. This was a significant change, as AT&T had previously required customers to lease telephones from the company rather than purchase them outright. The Kingsbury Agreement opened up the market for telephone equipment and allowed for increased competition in the industry. In conclusion, the correct option is a. The Kingsbury Agreement.

Learn more about mechanical devices here,  

https://brainly.com/question/32328139

#SPJ11

Water at = 0.02 kg/s and T-20°C enters an annular region formed by an inner tube of diameter D,- 25 mm and an outer tube of diameter D-100 mm, then the heat flux from the inner tube at the outlet is approximately 156452.6 W/m².

We know that, the heat transfer rate is:

Q = [tex]m_{dot} * Cp * (T_{out} - T_{in})[/tex]

Given that:

[tex]m_{dot[/tex] = 0.02 kg/s

Cp = 4186 J/kg°C

Q = 0.02 * 4186 * (75 - 20)

   = 0.02 * 4186 * 55

   = 4594.4 W

The heat flux can be calculated using the equation:

q = Q / A

L = Q / q

A = π * [tex](D_o^2 - D_i^2)[/tex]

[tex]D_o[/tex] = 100 mm = 0.1 m

[tex]D_i[/tex] = 25 mm = 0.025 m

A = π * ([tex]0.1^2 - 0.025^2[/tex]) = π * (0.01 - 0.000625) = π * 0.009375 ≈ 0.0294 m²

L = Q / q = 4594.4 / (4594.4 / 0.0294) ≈ 0.0294 m

So,

q = Q / A = 4594.4 / 0.0294

  =156452.6 W/m²

Thus, the heat flux from the inner tube at the outlet is approximately 156452.6 W/m².

For more details regarding heat flux, visit:

https://brainly.com/question/30763068

#SPJ4

The reaction of machine operators to the 'future state' value stream can vary depending on several factors, including their level of involvement in the improvement process, their understanding of the changes, and their perception of the impact on their work.

A Machine Operator is a professional who is responsible for operating their assigned machinery. They ensure their machine runs smoothly, works at capacity without issue and is appropriately maintained.

Some machine operators may embrace the 'future state' value stream and be enthusiastic about the proposed improvements. They may appreciate the potential benefits, such as increased efficiency, reduced waste, and improved working conditions. These operators may actively engage in the implementation of the changes, collaborate with others, and provide valuable input based on their expertise.

Know more about machine operators here:

https://brainly.com/question/32451011

#SPJ11

The mass of air in the tank is 0.05597 kg.

Given data:

Volume of air (V) = 2 m³

Temperature (T) = -93°C = -93 + 273.15 = 180.15 K

Gage pressure (P) = 1.4 MPa = 1.4 * 10⁶ Pa

To determine the mass of air, we can use the ideal gas law equation [tex]PV = nRT[/tex]

We will calculate the number of moles of air using the ideal gas law: n = PV / RT

Substituting values:

n = (1.4 * 10⁶ Pa * 2 m³) / (8.314 J/(mol·K) * 180.15 K)

n ≈ 1.933 mol

Given: The molar mass of air can be approximated as 28.97 g/mol.

Mass of air = n * Molar mass

Mass of air = 1.933 mol * 28.97 g/mol

Mass of air ≈ 55.97 g

Converting grams to kilograms:

Mass of air = 0.05597 kg.

Read more about mass

brainly.com/question/19626802

#SPJ4

(a) The difference equation for the FIR filter can be written as: y[n] = x[n] * h[0] + x[n-1] * h[1] + x[n-2] * h[2] (b) you will obtain a plot of the impulse response of the FIR filter. Compare this plot with the original impulse response h[] = [-1, -2, -4] to verify their similarity. The plot should show the same values as the original impulse response at the corresponding time indices.

a) To write the difference equation for the FIR filter, we need to express the output of the filter as a function of its input and the filter coefficients.

Given the impulse response h[n] = [-1, -2, -4], the difference equation for the FIR filter can be written as:

y[n] = x[n] * h[0] + x[n-1] * h[1] + x[n-2] * h[2]

where:

y[n] is the output of the filter at time index n,

x[n] is the input to the filter at time index n, and

h[i] represents the filter coefficients at index i.

In this case, the difference equation becomes:

y[n] = x[n] * (-1) + x[n-1] * (-2) + x[n-2] * (-4)

b) To obtain the impulse response of the system using the difference equation in MATLAB, we can simulate the response of the filter to an impulse input. We will use the impz function in MATLAB to generate the impulse response.% FIR filter coefficients

h = [-1, -2, -4];

% Generate impulse response using difference equation

impulse_response = impz(h);

% Plot impulse response

stem(impulse_response);

title('Impulse Response of the FIR Filter');

xlabel('Time Index');

ylabel('Amplitude');

By running this code, you will obtain a plot of the impulse response of the FIR filter. Compare this plot with the original impulse response h[] = [-1, -2, -4] to verify their similarity. The plot should show the same values as the original impulse response at the corresponding time indices.

To learn more about FIR filter visit: https://brainly.com/question/31390819

#SPJ11

The average power of the circuit is option A) 91 W.

To calculate the average power of the LRC AC circuit, we can use the formula:

Average Power = RMS Voltage × RMS Current × Power Factor

First, let's find the RMS (Root Mean Square) values of the voltage and current. The RMS value is equal to the peak value divided by the square root of 2:

RMS Voltage = Peak Voltage / √2

RMS Current = Peak Current / √2

Given:

Peak Voltage = 110 V

Peak Current = 2.00 A

RMS Voltage = 110 V / √2 ≈ 77.78 V

RMS Current = 2.00 A / √2 ≈ 1.41 A

Next, let's calculate the power factor. The power factor is the cosine of the phase angle between the voltage and current:

Power Factor = cos(θ)

Given:

Phase angle (θ) = 35 degrees

Power Factor = cos(35°) ≈ 0.819

Now, we can calculate the average power using the formula:

Average Power = RMS Voltage × RMS Current × Power Factor

Average Power = 77.78 V × 1.41 A × 0.819 ≈ 91 W

Therefore, the average power of the circuit is approximately 91 W.

Learn more about average power here:-

https://brainly.com/question/31040796
#SPJ11

Required net cost will be $1,546.07 and SECOND DISCOUNT PRICE - (0.03 x (SECOND DISCOUNT PRICE)= NET COST.

To solve the problem at hand using the given chart, we will use the following formulae:LIST PRICE - (0.15 x LIST PRICE) = FIRST DISCOUNT PRICEFIRST DISCOUNT PRICE - (0.10 x FIRST DISCOUNT PRICE) = SECOND DISCOUNT PRICESECOND DISCOUNT PRICE - (0.03 x SECOND DISCOUNT PRICE) = NET COST

First, let's calculate the first discount:15% of $2,150 = 0.15 x $2,150 = $322.5Therefore, the list price minus the first discount price will be:LIST PRICE - FIRST DISCOUNT PRICE = $2,150 - $322.5 = $1827.5Now we will calculate the second discount:10% of $1,827.5 = 0.10 x $1,827.5 = $182.75

Therefore, the first discount price minus the second discount price will be:FIRST DISCOUNT PRICE - SECOND DISCOUNT PRICE = $1,827.5 - $182.75 = $1,644.75Finally, we will calculate the net cost:3% of $1,644.75 = 0.03 x $1,644.75 = $49.34

Therefore, the second discount price minus the net cost will be:SECOND DISCOUNT PRICE - NET COST = $1,595.41 - $49.34 = $1,546.07Therefore, the net cost is $1,546.07. This is the final answer.In 150 words:A contractor purchased wire, fittings, and switches worth $2,150 at successive trade discounts of 15%, 10%, and 3%.

The problem requires finding out the net cost of the purchase. The chart provided can be used to solve this problem. The first step involves finding out the first discount, which is 15% of the list price. Using the formula LIST PRICE - (0.15 x LIST PRICE), the first discount can be calculated. The next step involves finding the second discount, which is 10% of the price after the first discount. Using the formula FIRST DISCOUNT PRICE - (0.10 x FIRST DISCOUNT PRICE), the second discount can be calculated.

Finally, the net cost can be calculated by finding the 3% of the price after the second discount and then subtracting it from the second discount price. Using the formula SECOND DISCOUNT PRICE - (0.03 x SECOND DISCOUNT PRICE), the net cost can be calculated. The final answer for this problem is $1,546.07.

Learn more about discount price here,

https://brainly.com/question/31338918

#SPJ11

Answer: System B is more scalable than System A, and Tn(B)/Tn(A) > 1 System B cannot be slower than System A because W(B) < W(A), i.e., B requires less work than A.

Explanation : The isoefficiency metric is used to determine the scalability of a computer system. For all values of b and c > 0, the isoefficiency metric demonstrates that system B is more scalable than system A, assuming a fixed efficiency of E = 0.25 and using the two matrix multiplication schemes in Example 3.23 of the book.

When b = 4c, W(A) = 1.33^3n^1.5 and W(B) = n^1.5.W(A) = 1.33^3n^1.5, and W(B) = n^1.5, given that b = 4c.

The isoefficiency metric determines the ratio of work to communication as the system size grows, with the aim of maintaining the same efficiency throughout the scaling process.

Therefore, system B is more scalable than system A, regardless of the values of b and c, according to the isoefficiency metric.

Using Table 3.25, we obtain parallel execution times for system A and system B. The computation times for both systems may be calculated using these data. When n = 4096, the computation time for system A is Tn(A) = 5.00, while the computation time for system B is Tn(B) = 4.50.

We can estimate the scalability of both systems by calculating the ratio Tn(B)/Tn(A), which gives us an idea of how much more scalable system B is than system A.

Tn(B)/Tn(A) = (W(A)/W(B))/E.=(1.33^3*n^1.5/n^1.5)/(0.25) = 15.98.

Therefore, when n = 4096, system B is 15.98 times more scalable than system A.

Yes, System B can be slower than system A. If the matrix is small, the system may have an additional cost because of the overhead associated with coordinating the parallel processes and sending messages among the processors.

When the number of processors is limited, the communication overhead may become excessive, resulting in slower operation. Therefore, the cost of interprocessor communication in parallel systems might outweigh the benefits of parallelism, resulting in slower operation.

Learn more about isoefficiency metric here https://brainly.com/question/29215877

#SPJ11

The sum of the two binary numbers is not zero, which is why the sign-magnitude method for representing signed numbers is not used in most computers.

The sign-magnitude method for representing signed numbers is not used in most computers because of its limitation. The sign-magnitude representation for numbers has a few limitations, which is why it is not used in most computers. One of the biggest drawbacks is that it requires two representations for zero, which makes arithmetic operations difficult. When performing arithmetic operations on numbers represented using the sign-magnitude method, we must first examine the signs of the operands to determine the operation to perform. We'll look at the steps to represent +12 in eight bits using the sign-magnitude form and represent -12 in eight bits using the sign-magnitude form. Finally, we'll add the two binary numbers and note that the sum does not look like zero.To represent +12 in eight bits using the sign-magnitude form, follow the below steps:Step 1: Convert the absolute value of 12 into binary form.1100 is the binary representation of 12.Step 2: Since the number is positive, the leftmost bit must be 0. As a result, the final binary representation is 01100.01100 is the sign-magnitude representation of +12.To represent -12 in eight bits using the sign-magnitude form, follow the below steps:Step 1: Convert the absolute value of 12 into binary form.1100 is the binary representation of 12.Step 2: Since the number is negative, the leftmost bit must be 1. As a result, the final binary representation is 11100.11100 is the sign-magnitude representation of -12.Adding the two binary numbers gives:01100+11100=101000As we can see, the sum of the two binary numbers is not zero, which is why the sign-magnitude method for representing signed numbers is not used in most computers.

Learn more about binary numbers here:

https://brainly.com/question/28222245

#SPJ11

9514 1404 393

Answer:

  1

Explanation:

Only one such circle can be drawn. The diameter of the 10" circle will be a radius of the semicircle. In order for the 10" circle to be wholly contained, the flat side of the semicircle must be tangent to the 10" circle. There is only one position in the figure where that can happen. (see attached).

Answer:

T (True). Evidence suggests that discovery learning is not effective in improving observer's performance.

Evidence from research studies indicates that discovery learning, where learners explore and discover concepts or solutions on their own, may not be as effective in improving observer's performance compared to other instructional methods. Some studies have found that guided instruction, which provides explicit guidance and support, leads to better learning outcomes and performance than discovery learning alone. Guided instruction helps learners acquire foundational knowledge and skills before engaging in more independent exploration. While discovery learning can have benefits in certain contexts and for specific learning objectives, research suggests that a balanced approach combining both guided instruction and opportunities for independent exploration may be more effective in promoting learning and improving performance.

Know more about research studies here:

https://brainly.com/question/28487173

#SPJ11

The given information outlines the objective of optimizing the performance of con-rods for high-performance engines and the constraints related to high-cycle fatigue and elastic buckling. However, the precise formulations of the objective function, performance equations, and material indices are not provided, making it difficult to provide further details or calculations.

Objective Function:

The objective function for designing con-rods for high-performance engines is to optimize their performance. However, the specific details of the objective function are not provided in the given text.

Constraint Function 1 - "Must not fail by high-cycle fatigue":

This constraint ensures that the con-rods should be able to withstand high-cycle fatigue without failure. High-cycle fatigue refers to the repeated stress cycles experienced by the con-rods during engine operation. The constraint function sets a limit on the maximum stress that the con-rods can endure without failure.

Performance Equation 1 (m1):

The performance equation 1, denoted as m1, combines the objective function (not explicitly mentioned) and constraint function 1 for high-cycle fatigue. The exact formulation of this equation is not provided in the given text.

Material Index 1 (MI):

Material Index 1 (MI) is defined to minimize the performance equation 1 (m1). It is a design parameter used to optimize the material selection for the con-rods, considering the objective function and the constraint related to high-cycle fatigue. The specific calculation or formula for Material Index 1 is not given.

Constraint Function 2 - "Must not fail by elastic buckling":

This constraint ensures that the con-rods should not fail due to elastic buckling, which is the instability caused by compressive loads. It sets a limit on the critical buckling load or the maximum compressive load that the con-rods can withstand without buckling.

Performance Equation 2 (m2):

The performance equation 2, denoted as m2, combines the objective function (not explicitly mentioned) and constraint function 2 for elastic buckling. The exact formulation of this equation is not provided in the given text.

Material Index 2 (M2):

Material Index 2 (M2) is defined to minimize the performance equation 2 (m2). It is a design parameter used to optimize the material selection for the con-rods, considering the objective function and the constraint related to elastic buckling. The specific calculation or formula for Material Index 2 is not given.

Learn more about elastic buckling here:-

https://brainly.com/question/31655524
#SPJ11

Here's the Python program that meets the requirements mentioned above:```# Preloaded datacurrencies = ["USD", "EUR", "GBP", "AUD", "CAD", "JPY", "INR", "RUB", "CHF"]# Main menudisplay_menu = '''\nWelcome to Currency Menu!\n\n1. Display the list of currency types.\n2. Display the number of currency types.\n3. Check if a currency type exists in the list.\n4. Return the index of a currency type.\n5. Add a currency type.\n6. Exit the program.\n\nPlease enter your choice: '''# Display the bannerprint("***********************")print("* CURRENCY INFORMATION *")print("***********************")# Display the menu and get user inputchoice = int(input(display_menu))# Loop to display the menu and handle user inputwhile choice != 6: if choice == 1: # Display the list of currency types print("List of currency types:\n") for currency in currencies: print(currency) elif choice == 2: # Display the number of currency types print(f"\nThere are {len(currencies)} currency types in the list.") elif choice == 3: # Check if a currency type exists in the list query = input("\nEnter a currency type to check if it exists: ") if query in currencies: print(f"\n{query} exists in the list of currency types.") else: print(f"\n{query} does not exist in the list of currency types.") elif choice == 4: # Return the index of a currency type query = input("\nEnter a currency type to get its index number: ") if query in currencies: print(f"\nThe index number of {query} is {currencies.index(query)}.") else: print(f"\n{query} does not exist in the list of currency types.") elif choice == 5: # Add a currency type query = input("\nEnter a currency type to add to the list: ") currencies.append(query) print(f"\n{query} has been added to the list of currency types.") print("\nUpdated list of currency types:\n") for currency in currencies: print(currency) else: # Invalid choice print("\nInvalid choice. Please try again.") # Display the menu again and get user input choice = int(input(display_menu))# Exit the programprint("\nThank you for using Currency Menu! Goodbye.")```The program works as follows:1. The list of currency types is preloaded in the program.2. The program displays a banner and a menu with 6 options.3. The user enters their choice, and the program uses a loop to handle their input and perform the selected function.4. The program only exits the loop when the user selects option 6 to exit.5. If the user selects option 1, the program displays the list of currency types using a for loop.6. If the user selects option 2, the program uses the len() function to get the number of currency types and displays it in a sentence format.7. If the user selects option 3, the program prompts the user to enter a currency type and checks if it exists in the list using the in operator. The program then displays the result in a sentence format.8. If the user selects option 4, the program prompts the user to enter a currency type and uses the index() method to get its index number in the list. The program then displays the result in a sentence format.9. If the user selects option 5, the program prompts the user to enter a currency type and uses the append() method to add it to the list. The program then displays a confirmation message and the updated list of currency types using a for loop.10. If the user enters an invalid choice, the program displays an error message and the menu again.11. When the user selects option 6, the program displays a goodbye message and exits.

To know more about index number,

https://brainly.com/question/24275900

#SPJ11

The value of the linear resistance R is 229.7 Ω (ohms).

Given the following data,

The initial level of liquid in the tank = 5 m

Time taken to empty the tank = 200 s

Let's assume the linear resistance R

The formula for the volume flow rate of liquid through the outlet is given by,

Q = (P-Po)/R ...............(i)

where P is the pressure of the liquid in the tank, Po is the pressure of the atmosphere, and Q is the volume flow rate.

Since the liquid level in the tank is initially 5 m, the pressure of the liquid in the tank is given by,

P = ρgh + Po

where ρ = 1,000 kg/m³, g = 9.8 m/s², h = 5 m and Po = 1.01 × 10⁵ N/m²

Pressure P = (1,000 × 9.8 × 5) + (1.01 × 10⁵) = 1,049,010 N/m²

Let V be the volume of the liquid in the tank.

Let dV/dt be the rate of change of volume of the liquid in the tank.

From the information given in the problem, we can write,

dV/dt = Q ...........(ii)

Where Q is the volume flow rate of liquid through the outlet. When the outlet is opened, the volume of liquid decreases at a constant rate. Hence,

dV/dt = -k

where k is a positive constant. Thus,

dV/dt = -k = Q

Combining equations (i) and (ii), we get,

(P-Po)/R = -k

where k is a positive constant.

Substituting the values of P, Po, and R, we get,(1,049,010-1.01 × 10⁵)/R = -k

So, k = (1,049,010-1.01 × 10⁵)/R = 1008905/R

The percentage of liquid remaining after time t is given by, (V(t)/V) × 100%

Since the tank empties by 98% in 200 seconds, we can write,

V(200)/V × 100% = 2%0.02V = V(0) - Q(0) × 200

where V(0) = 5πr² and Q(0) is the initial volume flow rate.

Substituting the values of V(0) and Q(0), we get,

0.02(5πr²) = (1,049,010-1.01 × 10⁵) × πr²/R × 200Thus, R = (πr² × 200 × 0.02 × 1008905)/(1,049,010-1.01 × 10⁵)R = 229.7 Ω

Therefore, the value of the linear resistance R is 229.7 Ω (ohms).

learn more about linear resistance here:

https://brainly.com/question/31824202

3SPJ11

Here's a function called Close Enough which takes a const reference to a vector of strings and an int. This function is used to check if there are two adjacent strings in a list that are very similar to each other by determining the number of characters that can be different between any two strings next to each other.

The function starts by iterating through the vector of strings from the first to the second to last string. For each string, it then counts the number of differences between it and the next string by comparing the characters at each position.

If the number of differences is less than or equal to the given integer n, the function returns the index of the current string. If there is no such index, the function returns -1.

To know more about vector visit:

https://brainly.com/question/24256726

#SPJ11

Answer:

Answer is A

Explanation:

Doesn't break 360 degrees of bend.

The bend that can be used in conduit run is one 90-degree, three 45-degree, and four 30-degree.

Bend that can be used in conduit run is equal or less than 360 degree.

So, One 90-degree, three 45-degree, and four 30-degree is the bend that can be used in conduit run.

Learn more: brainly.com/question/21199524

The solution to the given recurrence relation subject to the basis step is B(n) = 5 x 3^(n-1) is the answer.

Solving the given recurrence relation B(1) = 5 B(n) = 3B(n - 1) for n greater than or equal to 2, subject to the basic step.

For the basis step, we are given B(1) = 5.

So, the first element of the sequence is 5.

Now, let's find the second element of the sequence B(2) using the given recurrence relation.

B(2) = 3B(1) = 3 x 5 = 15.

We know that B(1) = 5 and B(2) = 15.

Using the recurrence relation, we can find the next terms of the sequence as follows: B(3) = 3B(2) = 3 x 15 = 45B(4) = 3B(3) = 3 x 45 = 135B(5) = 3B(4) = 3 x 135 = 405 And so on.

We can see that each term of the sequence is three times the previous term.

So, the sequence is an exponential sequence of the form B(n) = a x 3^(n-1), where a is the first term of the sequence.

Based on the values of the first two terms, we have B(1) = 5 and B(2) = 15.

Using these values, we can find the value of 'a' as follows: 5 = a x 3^(1-1) => a = 5.

So, the sequence is given by the formula B(n) = 5 x 3^(n-1).

Therefore, the solution to the given recurrence relation subject to the basis step is B(n) = 5 x 3^(n-1).

know more about recurrence relation

https://brainly.com/question/30895268

#SPJ11

Some questions on heat transfer with answers:

1. What is heat transfer and what are the three modes of heat transfer?

Heat transfer is the process of energy transfer between objects or regions due to temperature differences. The three modes of heat transfer are conduction, convection, and radiation.

Conduction refers to the transfer of heat through direct contact between objects or particles. Convection involves the transfer of heat through the movement of fluids (liquids or gases).

Radiation is the transfer of heat through electromagnetic waves, such as infrared radiation.

2. How does conduction occur and what factors affect the rate of conduction?

Conduction occurs when heat is transferred from a region of higher temperature to a region of lower temperature within a solid or between solids in contact. The rate of conduction is influenced by factors such as the thermal conductivity of the material, the temperature difference across the material, the cross-sectional area of the material, and the distance over which heat is transferred.

3. What is the difference between natural convection and forced convection?

Natural convection is the mode of heat transfer that occurs due to density differences caused by temperature variations. It involves the transfer of heat through the movement of fluids caused by buoyancy effects, such as hot air rising and cold air sinking.

Forced convection, on the other hand, is the mode of heat transfer that occurs when an external force, such as a fan or pump, is used to actively circulate the fluid and enhance the heat transfer rate.

4. How does radiation heat transfer work and what factors affect the rate of radiation?

Radiation heat transfer occurs through electromagnetic waves without the need for a medium. It can occur between objects at different temperatures, even in a vacuum.

The rate of radiation heat transfer is influenced by factors such as the emissivity of the objects (a measure of their ability to emit radiation), their temperature, the surface area and geometry of the objects, and the presence of intervening materials that may absorb or reflect the radiation.

5. How is heat transfer important in everyday life and engineering applications?

Heat transfer plays a crucial role in various aspects of everyday life and engineering applications. It is involved in processes like cooking, heating and cooling systems, power generation, refrigeration, and many industrial processes.

Understanding heat transfer allows engineers to design efficient heat exchangers, thermal insulation systems, and cooling mechanisms. It is also essential in fields such as material science, aerospace engineering, electronics cooling, and environmental studies, enabling the efficient transfer and control of thermal energy for practical applications.

For more questions on electromagnetic waves, click on:

https://brainly.com/question/31492825

#SPJ8

The Fibonacci series is a sequence of numbers that starts with 0 and 1, and each subsequent number is the sum of the previous two numbers. In this question, we are supposed to write a procedure that produces N values in the Fibonacci number series.

Stores them in an array of doubleword and then display the array to present Fibonacci numbers in hexadecimal (calling the Dump Mem method from the Irvine32 library).The above code declares an array named arr of 30 doublewords.

It then calls the Fibonacci procedure and passes the address of the array and the length of the array as parameters. Finally, it displays the array in hexadecimal using the DumpMem method from the Irvine32 library.

To know more about Fibonacci visit:

https://brainly.com/question/29764204

#SPJ11

Answer:

6.27 × 10⁻⁴

Explanation:

Relative roughness, k = ε/D where ε = absolute roughness = 0.0025 mm and D = internal pipe diameter = 0.157 in = 0.157 × 25.4 mm = 3.9878 mm

So, k = ε/D

= 0.0025 mm/3.9878 mm

= 6.27 × 10⁻⁴

The relative pipe roughness for a plastic pipe will be:

"6.27 × 10⁻⁴".

According to the question,

Absolute roughness, ε = 0.0025 mm

Internal pipe diameter, D = 0.157 in or,

                                          = 0.157 × 25.4 mm

                                          = 3.9878 mm

We know that,

The relative roughness be:

→ k = [tex]\frac{Absolute \ roughness}{Diameter}[/tex]

or,

   k = [tex]\frac{\varepsilon }{D}[/tex]

By substituting the above values,

      = [tex]\frac{0.0025}{3.9878}[/tex]

      = 6.27 × 10⁻⁴

Thus the above approach is correct.

Find out more information about diameter will be:

https://brainly.com/question/13100709

a. To prove that  is irrational, suppose that it is not. Then it can be expressed as the ratio of two integers, m and n, with no common factors. This means that  can be written as , where p and q have no common factors. Squaring both sides, we obtain  = 2q2p2. Since  is even, it follows that q2p2 is even, and hence that both q2 and p2 must be even. But if p2 is even, then p must also be even (since an odd number squared is odd and an even number squared is even), and hence both p and q are even. But this contradicts our assumption that m and n have no common factors. Hence  is irrational.

c. The sum of two irrational numbers need not be irrational. For example, consider √2 and −√2. Both are irrational, since their square is 2, which is not a perfect square. But their sum is 0, which is rational. However, the sum of a rational number and an irrational number is always irrational. To see why, suppose that  is rational and  is irrational. Then their sum  can be expressed as the ratio of two integers, say  and , with no common factors. Suppose that  is also rational. Then it can be expressed as the ratio of two integers, say  and , with no common factors. It follows that  =  +  is also rational, which contradicts our assumption that  is irrational. Hence must be irrational.

To know more about irrational,

https://brainly.com/question/20400557

#SPJ11

Thus, the allowable load on the strut is 9.84 lbf.

Given Data:Length of the strut = L = 60 in = 5 ftBreadth of the strut = b = 2 inThickness of the strut = t = 0.125 inElastic Modulus of Aluminum = E = 10000 ksiLoad on the strut = PRequired:Allowable load on the strut = P (with Factor of Safety of 3.0)We know that the area of cross-section of the strut = A = b × t = 2 × 0.125 = 0.25 sq.in.And, Moment of Inertia of cross-sectional area of the strut, I = (1/12) × b × t³ = (1/12) × 2 × 0.125³ = 0.00052 in⁴Also, the slenderness ratio, L/r = L/√(I/A) = L/(I/A)^(1/2)As the strut is fixed at A and only supported by rollers at B and C, it can buckle in the plane of the figure and hence Euler's Buckling Load formula for this case is:PE = π² × E × I / L²For the given strut,PE = π² × 10000 × 0.00052 / (60×12)²= 29.52 lbfNow, the allowable load, P = PE / FoS= 29.52 / 3= 9.84 lbfThus, the allowable load on the strut is 9.84 lbf.

To know more about allowable load,

https://brainly.com/question/30464657

#SPJ11

For the heat engines operating on a Carnot cycle and a thermal efficiency of 55%:

(a) The power output of the engine is 440 kJ/min

(b) The temperature of the source is 367.18°C.

We are given that:

A heat engine is operating on a Carnot cycle and has a thermal efficiency of 55%.The waste heat from this engine is rejected to a nearby lake at 15°C at a rate of 800 kJ/min.

(a) The power output of the engine:

The power output of the engine is given by the formula:

Power output = Efficiency × Heat supplied

= (55/100) × Heat supplied

Since the engine works on Carnot cycle, the efficiency of the Carnot engine can be given by the formula:

Efficiency of Carnot engine = 1 – T2 / T1, where T1 is the temperature of the source and T2 is the temperature of the sink.

Rearranging the formula, we get:

T1 = T2 / (1 – Efficiency of Carnot engine)

T1 = 288.15 / (1 – 0.55) = 640.33 K

Power output = (55/100) × Heat supplied

= (55/100) × 800 kJ/min

= 440 kJ/min

(b) The temperature of the source:

T1 = 640.33 K = 367.18°C

Therefore, the power output of the engine is 440 kJ/min and the temperature of the source is 367.18°C.

To know more about heat engines, visit the link : https://brainly.com/question/28562659

#SPJ11