Non-value-added activities should be reduced or eliminated. Option a is correct.
In accounting, a non-value-added activity is an activity that adds no value to the final product. Non-value-added activities are actions that do not improve a company's product or service in the eyes of the customer. The ultimate goal of a company is to eliminate non-value-added activities and replace them with value-added activities.
The value-added activities are those that increase the worth of the product or service in the eyes of the customer. The benefits of value-added activities are that they provide the consumer with a higher quality product or service, while also reducing the cost of the product or service.
Therefore, a is correct.
Learn more about non-value-added https://brainly.com/question/31265039
#SPJ11
For this exercise s=1+the fourth digit of your student number. A research laboratory announces the discovery of a new refreshment. Immediately the public expresses a (linear) demand for the new product. There are two firms which have capacity to produce quantities 91, 92 of the new product with constant marginal costs c₁, c2 respectively, where c2 = C₁ + 4 x s. You observe that before firms start to produce (i.e., q1 = 92 = 0) the market clears at p 160 × s. When supplies arrive at the market you observe that the equilib- rium price and quantity settle at p = 60 × s and Q = 200 × s respectively. = (i) Suppose that you consider investing in firm 1 by financing half of its production cost in exchange for half of its venue. Compute the profit that firm 1 would retain after paying you off. (ii) Alternatively you consider investing in this market and discover that, at a fixed cost F 70000, you can buy a technology to produce the new product with constant marginal costs c = 60. Explain and justify whether or not you would invest in this market. = (iii) Explain whether or not the manager of firm 1 would rather accept your offer in (i), or decline it and let you proceed with your alternative in (ii).
(i) The profit retained by firm 1 after paying you off is given by Profit₁ = (60 × s) × (200 × s - 92) - (1/2)(c₁ × (200 × s - 92)).
(ii) Whether or not to invest in the market depends on whether the profit from investing (Profit₂) exceeds zero: Profit₂ = (60 × s) × (200 × s) - (70000 + 60 × (200 × s)).
(iii) If Profit₁ is greater than Profit₂, the manager of firm 1 would accept your offer in (i); otherwise, if Profit₂ is greater than or equal to Profit₁, the manager would decline your offer and let you proceed with your alternative in (ii).
To solve this problem, let's break it down into three parts:
(i) Computing the profit that firm 1 would retain after paying you off:
First, let's determine the equilibrium quantity produced by firm 1. We know that the total equilibrium quantity is Q = 200 × s. Since firm 2 produces a quantity of 92, firm 1 must produce the remaining quantity to satisfy the market demand. Therefore, firm 1 produces Q₁ = Q - 92 = 200 × s - 92.
The equilibrium price is given as p = 60 × s. Firm 1's revenue is calculated by multiplying the equilibrium price by the quantity it produces: R₁ = p × Q₁ = (60 × s) × (200 × s - 92).
Firm 1's production cost is c₁ × Q₁, where c₁ is the constant marginal cost for firm 1. The profit retained by firm 1 after paying you off is given by: Profit₁ = R₁ - (1/2)(c₁ × Q₁).
(ii) Evaluating whether to invest in the market with a fixed cost of F = 70000 and a constant marginal cost of c = 60:
In this case, let's compare the profit of investing in the market with the fixed cost to the profit of not investing (i.e., zero profit).
If you invest in the market, your revenue would be p × Q, where p is the equilibrium price (60 × s) and Q is the total equilibrium quantity (200 × s). Your cost would be the fixed cost F = 70000 plus the total production cost, which is c × Q. Therefore, your profit from investing in the market would be Profit₂ = (p × Q) - (F + c × Q).
If the profit from investing in the market (Profit₂) is greater than zero, it would be favorable to invest. Otherwise, if Profit₂ is less than or equal to zero, it would not be advantageous to invest.
(iii) Determining whether the manager of firm 1 would accept your offer in (i) or decline it in favor of your alternative in (ii):
To make this determination, compare the profit that firm 1 would retain after paying you off (Profit₁) to the profit it would earn if it declined your offer and let you proceed with your alternative in (ii) (Profit₂). If Profit₁ is greater than Profit₂, the manager of firm 1 would likely prefer to accept your offer. However, if Profit₂ is greater than or equal to Profit₁, the manager would likely decline your offer and proceed with the alternative investment.
To learn more about marginal costs, here
https://brainly.com/question/14923834
#SPJ4
What is the wage elasticity of labor demand in the long run if L^L/R = (5/6. ()-2/3?
The wage elasticity of labor demand in the long run is -2/3.
The labor demand function given to us:
[tex]L^{LR}=(\frac{r}{5})^{\frac{5}{6}}.(\frac{w}{2})^\frac{-2}{3}[/tex]
Where,
L^LR represents long run equilibrium level of employment,
r represents capital labor ratio, and
w represent wage rate.
Elasticity of labor demand with respect to wages:
E(w) = (w/L) × dL/dw
Taking the natural logarithm in the equation yields:
ln(L^LR) = (5/6) × ln(r/5) - (2/3) × ln(w/2)
dL/dw = -(2/3) × (L^LR) × (1/w)
Plugging the given values into the elasticity formula, we get:
E(w) = (w/L^LR) × dL/dw
= -(2/3)
Therefore, the wage elasticity of labor demand in the long run is -2/3.
To learn more about elasticity:
https://brainly.com/question/32567184
#SPJ4
A company reports the following income statement and balance sheet information for the current year:
Net income $429,000
Interest expense 75,700
Average total assets 5,150,000
Determine the return on total assets.
The return on total assets is 8.35% for the current year. It indicates the company's profitability in relation to its average total assets.
To calculate the return on total assets, we need to divide the net income by the average total assets. In this case, the net income is $429,000, and the average total assets are $5,150,000.
Return on Total Assets = Net Income / Average Total Assets
= $429,000 / $5,150,000
= 0.0835
To express this value as a percentage, we multiply it by 100.
Return on Total Assets = 0.0835 * 100
= 8.35%
The return on total assets indicates the profitability of a company's assets. It measures how efficiently a company is utilizing its assets to generate profits. In this case, the company has a return on total assets of 8.35%, which means that for every dollar of average total assets, the company generated a profit of 8.35 cents.
This metric is important for investors and stakeholders as it provides insights into the company's ability to generate profits from its assets. A higher return on total assets is generally favorable, indicating that the company is effectively utilizing its assets to generate profits. On the other hand, a lower return on total assets may suggest inefficiencies or underutilization of assets.
Learn more about total assets
brainly.com/question/21185895
#SPJ11
Consider the Normal Form Game characterized in the following figure: P1 \ P2 b1 b2 ib3 a1 (1,2) (0,1) (0,3) a2 (3,-1) (1,1) (-1,0) a3 (2,2) (1,-1) (3,0) a4 (-5,1) (-1,0) (-3,-2) a5 (-3,3) (3,0) (2,4)
The given figure represents a normal form game between two players, Player 1 (P1) and Player 2 (P2). The strategies available to Player 1 are labeled as a1, a2, a3, a4, and a5, while the strategies available to Player 2 are labeled as b1, b2, and b3.
The payoffs in each cell of the table represent the outcomes of the game when each player chooses a specific strategy combination. For example, in the cell corresponding to (a1, b1), Player 1 receives a payoff of 1 and Player 2 receives a payoff of 2.
To determine the dominant strategies, we look for strategies that always yield higher payoffs regardless of the other player's choice. In this game, there are no dominant strategies for either player because there is no single strategy that is always the best choice, regardless of the other player's strategy.
To find the Nash equilibria, we look for strategy combinations where neither player has an incentive to unilaterally deviate. In this game, there are multiple Nash equilibria, which are:
(a3, b3): Both players choose strategy a3 and b3, resulting in payoffs of (2, 0).
(a4, b1): Player 1 chooses strategy a4 and Player 2 chooses strategy b1, resulting in payoffs of (-5, 1).
(a5, b2): Player 1 chooses strategy a5 and Player 2 chooses strategy b2, resulting in payoffs of (-3, 3).
These strategy combinations are Nash equilibria because, at these points, neither player has an incentive to unilaterally switch strategies.
Note: It's important to understand that the analysis of a normal form game depends on the specific payoffs and strategic interactions presented in the game. The analysis provided here is based on the information given in the figure.
Learn more about risk premium here-
https://brainly.com/question/28523321
#SPJ4
1 pts Question 4. When we face hardships, high levels of uncertainty, and intense demands, we often think we might not be able to handle it all well. This is an example of O Role conflict O Anxiety O
The given statement "When we face hardships, high levels of uncertainty, and intense demands, we often think we might not be able to handle it all well" is an example of anxiety.
Anxiety refers to a psychological and physiological state that results in feelings of nervousness, apprehension, or fear. These feelings can arise in response to a particular stressor or they can exist for a prolonged period of time, and can impact an individual’s emotional, cognitive, and physical state.Anxiety can arise from a range of factors, including genetic and environmental influences.
Anxiety can manifest in a variety of ways, including physical symptoms (such as heart palpitations, sweating, or shortness of breath), cognitive symptoms (such as excessive worry or rumination), and behavioral symptoms (such as avoidance or compulsive behaviors). The severity and duration of anxiety can vary greatly between individuals, and treatment options can include therapy, medication, or a combination of both.
Learn more about Anxiety: https://brainly.com/question/1754863
#SPJ11
Use the following information for the next two items: On June 30, 2019, Ledsen Corporation leased a vehicle to Sleeping Co. Ledsen Corporation had purchased the vehicle on that day for its fair value of P89,721. The lease agreement, which cost Ledsen Corporation P1,457 to have drawn up, contained the following. Lease term - 4 years Economic life of vehicle - 6 years Annual payment, payable in advance on June 30 each year - P23,900 ▪ Estimated residual value at end of lease term - P15,000 ▪ Residual value guarantee - P7,500 Interest rate implicit in the lease (known to Sleeping) - 7% Sleeping's incremental borrowing rate - 8% Included in the annual payment is an amount of P1,900 to cover reimbursement for the costs of insurance and maintenance paid by the lessor. The asset will be returned to the lessor at the end of the lease term. Sleeping Co.'s fiscal year end is June 30. Note: Round off present value factors to four decimal places. Round off amounts to the nearest peso. Based on the information above, answer the following:
1. How much is the initial measurement of the right of use asset?
2. What is the current portion of the lease liability as at June 30, 2020?
1. Calculation of the initial measurement of the right-of-use asset The initial measurement of the right-of-use asset is the sum of the lease liability and any initial direct costs incurred by the lessor, less any lease incentives received by the lessee. Initial direct costs refer to the cost incurred by the lessor to obtain a lease.
Therefore, the initial measurement of the right-of-use asset is P93,571.00.2. Calculation of the current portion of the lease liability as at June 30, 2020:Each year, the lease payment payable in advance on June 30 is P25,800, of which P23,900 is for the use of the asset, and P1,900 is for reimbursement of insurance and maintenance expenses.Using the information given, the carrying amount of the lease liability on June 30, 2019, was P92,114.78 (computed above). Hence, the lease liability balance at the start of the current year (July 1, 2019) is P92,114.78.
The total payment for the year ended June 30, 2020, is P25,800, of which P23,900 is for the use of the asset, and P1,900 is for insurance and maintenance expenses. The interest component of the lease payment is calculated as follows: Interest component = Lease liability at the beginning of the period x Interest rate Lease liability at the beginning of the period = P92,114.78Interest rate = 7%Interest component = P92,114.78 x 7% = P6,448.04
Therefore, the current portion of the lease liability as of June 30, 2020, is the sum of the principal payment (lease payment - interest component) for the current year and the remaining balance of the lease liability at the end of the current year. Current portion of lease liability = Lease liability at the beginning of the year + Lease payment - Interest component - Lease liability at the end of the year Lease liability at the beginning of the year = P92,114.78Lease payment = P23,900 + P1,900 = P25,800.
Interest component = P6,448.04Lease liability at the end of the year = P85,807.06 (computed below)Lease liability at the end of the year = Lease liability at the beginning of the year + Principal payment Lease liability at the beginning of the year = P92,114.78.
Principal payment = Lease payment - Interest component = P25,800 - P6,448.04 = P19,351.96Lease liability at the end of the year = P92,114.78 + P19,351.96 = P85,807.06.
Therefore, the current portion of the lease liability as at June 30, 2020, is P25,558.76 (computed below):Current portion of lease liability = P25,800 - P6,448.04 - P85,807.06 = P25,558.76
To know more about incurred visit :
https://brainly.com/question/14829565
#SPJ11
Go online and find Cocacola Mission statement. Then, after analyze it. create a new mission statement for cocacola and explain in a paragraph why your mission Statement is better than the current statement.
Coca-Cola Company is a beverage manufacturing company. It has a vast number of brands and products that it produces to satisfy its customers worldwide.
Its current mission statement is “To refresh the world in mind, body, and spirit. To inspire moments of optimism and happiness through our brands and actions.”This mission statement is one of the most influential mission statements that a company has ever produced. It shows the company's intent to not only refresh but also provide happiness and joy to its customers. Coca-Cola’s current mission statement is good. However, we need to analyze and find areas where we can improve upon it.
My suggested new mission statement for Coca-Cola would be: “To inspire and connect people globally through our high-quality, innovative, and sustainable products while leading the beverage industry in ethical and transparent business practices.”This mission statement puts emphasis on the core values that the company believes in, it sets out to establish the company as a leader in the beverage industry with ethical and transparent business practices. My mission statement is better than the current statement for several reasons.
First, it sets out specific goals that the company wishes to achieve, it aims to provide high-quality and innovative products while ensuring sustainability. Secondly, it emphasizes the company's values and ethical business practices that are essential for the growth of any business. In conclusion, my proposed mission statement is better than the current statement because it provides a clear path to achieving the company's goals, emphasizes the company's values, and encourages ethical and transparent business practices.
To learn more about manufacturing company, visit here
https://brainly.com/question/32460282
#SPJ11
As discussed in class, Zappos has experimented with a unique organizational structure termed 'holacracy'. If you were an employee of an organization that suddenly switches over to a 'flatarchy' (no lines of reporting at all and everyone works in their own 'circle' , as at Zappos), what is the biggest problem you would experience ? You are free to offer your own perspective on the issue ; if you feel that there would be no problem at all in working in a 'holacracy', explain why you believe this is so.
The sudden switch from the traditional hierarchical structure of an organization to a flatarchy can be a major issue for employees. It may be a difficult change for those who have been used to working within a traditional organizational structure where managers and executives made all the decisions and gave out specific tasks to employees.
When an organization suddenly switches to a holacracy or flatarchy, it can lead to confusion among employees as they may not be sure what their exact roles and responsibilities are. Since there is no formal hierarchy, they may not know who to go to for guidance or direction on a particular task.
Also, the lack of structure may lead to a lack of accountability, as there may be no one to take responsibility for certain tasks or projects that are not completed on time or are not done to the required standard.
Furthermore, employees may experience a lack of clear goals and objectives. With no one in a formal position of leadership, it can be challenging for individuals to understand what the company's goals are and how they fit into achieving them. This can lead to confusion and a lack of motivation among employees since they may not see how their work contributes to the company's overall success.
Overall, the biggest problem employees would experience in a holacracy or flatarchy is the lack of structure, which can lead to confusion, lack of accountability, unclear goals, and ultimately, a lack of motivation among employees.
To know more about flatarchy visit:
https://brainly.com/question/32610964
#SPJ11
QUESTION 1 Which one of the following is not a requirement for or a characteristic of perfect competition? A. all market participants should have perfect knowledge of market conditions. B. the good must be homogeneous. C. there should be no government intervention. D. every firm must have the power to set its price.
The correct answer is option- D.The requirement that is not related to or characteristic of perfect competition is option D. Every firm must have the power to set its price.Perfect competition is a theoretical concept that describes an economic situation in which a market is said to have reached its ideal state.
This state is characterized by the presence of a large number of buyers and sellers, perfect knowledge of market conditions, homogeneous goods, and no government intervention. In this scenario, no single buyer or seller can influence the market price. Instead, the market price is determined by the forces of supply and demand.
The features of perfect competition include the following:There are a large number of buyers and sellers in the market.All firms produce and sell identical products.The buyers and sellers have perfect information about market conditions.
The market price is determined by supply and demand.There are no barriers to entry or exit from the market.Individual buyers and sellers cannot influence the market price.
Based on the above features, it can be concluded that every firm cannot have the power to set its price, which makes option D the correct answer.
For more question on Perfect competition
https://brainly.com/question/11898092
#SPJ8
2. Suppose you wish to estimate the following model: Y = B₁ + B₁X₁ + B₂W₁ +u, . You then decide to test for the presence of heteroscedasticty using the White's heteroscedasticity test. Specify the auxillary regression (as suggested by the White's test) you would use to test for the presence of heteroscedasticity [3 marks] 3. Consider the following equation for US per capita consumption of beef (standard errors in parentheses): B-330.3+49.11nY, -0.34PB, +0.33PP, t = (6.6) (-2.6) (2.7) R² = 0.87 d= 0.94 B₁ = The annual per capita pounds of beef consumed in the US in year t; InY,= The log of real per capita disposable income in the US in 1982 dollars in year t; PB₁ = Average annualized real wholesale price of beef in year t (in cents per pound); PP₁ = Average annualized real wholesale price of pork in year t (in cents per pound); a. What is the value of p; coefficient of autocovariance? [3 marks] b. Is there positive or negative autocorrelation in the above equation? Justify your answer. [2 marks]
Autocorrelation is said to be positive when a series has a tendency to follow its past behavior. In this case, since the R-squared value of the given equation is high (i.e., R² = 0.87), it indicates that the equation fits the data closely. In the given equation there is a positive autocorrelation.
The auxiliary regression (as suggested by the White's test) used to test for the presence of heteroscedasticity is given as follows:-
{σˆ²i} = δ0 + δ1X1i + δ2X2i + δ3X1²i + δ4X2²i + δ5 X1i X 2i where; X1i = the first OLS residual from the estimated model,X2i = the ith cross product residual from the estimated model, andσˆ²i = the squared residuals of the estimated model.
The given equation for US per capita consumption of beef is: B-330.3+ 49.11nY, -0.34PB, +0.33PP, t = (6.6) (-2.6) (2.7) R² = 0.87 d= 0.94. The value of p is not given in the given equation for US per capita consumption of beef. Therefore, we cannot calculate the coefficient of autocovariance.
The given equation has a positive autocorrelation. This means that the current value of beef consumption in the US is more likely to depend on the past values of the variable in the equation (i.e., InY, PB₁, and PP₁).
To learn more about "Autocorrelation" visit: https://brainly.com/question/28175782
#SPJ11
Match each of the Seven Tools of Quality Control to the appropriate description for each. 1. A tool used to organize and present process problems from most to least severe 2. A tool used to sequence the movements or actions of people or things involved in a complex system or activity > 3. A tool used to aid in brainstorming and isolating the causes of a problem > 4. A tool used to graph how a process changes over time < 5. A tool to graphical display data grouped into ranges > 6. A tool used to identify the frequency of occurrence for each identified problem > 7. A tool used to plot the values of two variables along two axes in order to reveal any correlation present >
The one word answers are 1, Pareto Chart 2, Flowchart 3, Cause and Effect Diagram (also known as Fishbone Diagram or Ishikawa Diagram) 4, Time Series Plot, 5 Histogram, 6 Check Sheet, 7 Scatter Plot.
A Pareto Chart is used to organize and present process problems from most to least severe, allowing prioritization of improvement efforts based on the Pareto principle.
A Flowchart is used to sequence the movements or actions of people or things involved in a complex system or activity, providing a visual representation of the process flow.
A Cause and Effect Diagram (Fishbone Diagram) aids in brainstorming and isolating the causes of a problem by categorizing potential causes into major categories and subcategories.
A Time Series Plot graphically shows how a process changes over time, allowing analysis of trends, patterns, and seasonal variations.
A Histogram is a graphical display of data grouped into ranges, providing a visual representation of the distribution and frequency of data values.
A Check Sheet is used to identify the frequency of occurrence for each identified problem or event, allowing for easy tracking and analysis.
A Scatter Plot plots the values of two variables along two axes, revealing any correlation or relationship between them, helping to identify patterns and trends.
To know more about Scatter Plot:
https://brainly.com/question/29231735
#SPJ4
--The given question is incomplete, the complete question is given below " Give one word answer for each of the Seven Tools of Quality Control to the appropriate description for each. 1. A tool used to organize and present process problems from most to least severe 2. A tool used to sequence the movements or actions of people or things involved in a complex system or activity > 3. A tool used to aid in brainstorming and isolating the causes of a problem > 4. A tool used to graph how a process changes over time < 5. A tool to graphical display data grouped into ranges > 6. A tool used to identify the frequency of occurrence for each identified problem > 7. A tool used to plot the values of two variables along two axes in order to reveal any correlation present >"--
The U.S. government provided substantial fiscal stimulus from spring of 2020 to summer 2021. During this time, public health interventions reduced the production of services, but not of goods. Use the AS/AD framework to answer the following questions. a) How should the stimulus policies be represented in aggregate demand and aggregate supply? On a graph, show how the curves shift when the stimulus goes into effect in a recession. Show how the increase in spending is reflected in the AD and AS equations. b) Explain (using graphs and simple equations) how inflation and output might respond to the expenditure increase. c) Your answer to part b shows how inflation and output change over time. Explain how consumption (C/Y) and investment (1/Ỹ) change at over the same period. (Use the IS-MP diagram to help explain.) d) In response to the Covid-19 lockdowns, the Fed lowered the fed funds rate (which had only been recently raised). Use your AS/AD model to explain how this would affect output and inflation in the absence of the stimulus payments.
a) The stimulus policies would be represented in aggregate demand and aggregate supply by shifting the curves of the AS/AD model. The fiscal stimulus leads to an increase in government spending, which directly increases aggregate demand (AD) at each price level.
Additionally, the fiscal stimulus may increase productivity and labor supply, which increases aggregate supply (AS) as well, but to a smaller extent.
AD = C + I + G + NXAS equation: AS = F (L, K, H) + technology + natural resources,where C represents consumption, I represents investment, G represents government spending, NX represents net exports, L represents labor, K represents capital, H represents natural resources, and F represents a production function
.b) Inflation and output might respond to the expenditure increase in the following ways:In the short run, the increase in aggregate demand (AD) resulting from the stimulus will lead to higher output (GDP) and higher prices. This is due to the fact that the supply of goods and services is fixed in the short run, so an increase in demand can only be met by higher prices (inflation).
Learn more about investment Here-
https://brainly.com/question/29547577
#SPJ11
Decide whether the following statement is true or false.
The graph of a rational function may intersect a vertical asymptote.
The statement is true. In a rational function, which is a function defined as the ratio of two polynomial functions, it is possible for the graph to intersect a vertical asymptote.
A vertical asymptote occurs when the denominator of the rational function becomes zero at a certain value of x, resulting in an undefined point. This causes the function to approach positive or negative infinity as x approaches that value.
However, it is important to note that the graph of a rational function can intersect a vertical asymptote only if the numerator of the function also evaluates to zero at the same x value. This means that the function has a removable discontinuity or hole at that point, and the graph can cross the vertical asymptote.
Therefore, the statement is true because there are cases where a rational function can intersect a vertical asymptote.
To learn more about graph click here
brainly.com/question/32563856
#SPJ11
1. Suppose that production function of the steelworks is given by Q5LK, where L is the number of workers, and K is the amount of capital used to give Q units of steel daily. Steelwork can hire labor at $10 per unit, and the cost of capital is $20 per unit. What are the returns to scale of the above production function? What is the optimal mix of inputs to produce 40 units of steel?
The production function for the steelworks is given by Q = 5LK. The cost of labor per unit = $10 and the cost of capital per unit = $20.
Thus, the cost of production per unit can be calculated as follows: Cost per unit = ($10 × L) + ($20 × K)The returns to scale of the above production function The returns to scale of a production function are determined by increasing both capital and labor inputs proportionately, and then calculating the resulting increase in output.
We say that a production function exhibits constant returns to scale if when we double the inputs, we get exactly twice as much output. The production function is given by Q = 5LK. Therefore, if we increase both capital and labor inputs proportionately, the resulting increase in output can be calculated as follows: If we double both L and K, then the new output Q' can be calculated as follows: Q' = 5(2L)(2K) = 20LKThus, if we double both inputs, we get four times as much output.
To know more about steelworks visit:-
https://brainly.com/question/15412751
#SPJ11
Brislin Products has a new product going on the market next year. The following data are projections for production and sales:
Variable costs $250,000
Fixed costs $450,000
ROI 14%
Investment $2,000,000
Sales 200,000 units
What is the target selling price per unit?
The target selling price per unit for the new product is $4.90. (Target Selling Price = (Variable Costs + Fixed Costs + Desired ROI) / Number of Units)
To determine the target selling price per unit, we need to consider the variable costs, fixed costs, desired return on investment (ROI), and the number of units to be sold.
The formula to calculate the target selling price per unit is:
Target Selling Price = (Variable Costs + Fixed Costs + Desired ROI) / Number of Units
Let's plug in the given values:
Variable Costs = $250,000
Fixed Costs = $450,000
ROI = 14% (or 0.14 as a decimal)
Number of Units = 200,000
Target Selling Price = ($250,000 + $450,000 + (0.14 x $2,000,000)) / 200,000
Calculating the desired ROI:
Desired ROI = 0.14 x $2,000,000 = $280,000
Target Selling Price = ($250,000 + $450,000 + $280,000) / 200,000
Target Selling Price = $980,000 / 200,000
Target Selling Price = $4.90
Therefore, the target selling price per unit for the new product is $4.90.
To know more about selling price follow the link:
https://brainly.com/question/27796445
#SPJ4
1. The conversion cycle comprises two major subsystems: Blank 1 and Blank 2 systems.
2. a Ledger is a book of Blank 1 that reflects the financial effects of the firm transactions.
The conversion cycle comprises two major subsystems: production and sales systems.
A ledger is a book of accounts that reflects the financial effects of the firm's transactions.
1. The process of turning raw materials into finished products and then selling them to customers is referred to as the conversion cycle. It involves a number of steps such as purchasing raw materials, producing goods, and selling them. Activities like sourcing materials, manufacturing, quality assurance and inventory management are all included in the production system. The sales system includes tasks for marketing, processing sales orders, managing customer relationships and distribution.
2. An essential element of the accounting system that is used to track and compile financial transactions is a ledger. It is a book or electronic record with individual accounts that classifies and organizes financial data. A distinct category such as assets, liabilities, equity, revenues or expenses is represented by each account. The ledger provides a chronological and organized record of the transactions that are recorded in the corresponding accounts. The ledger is necessary for keeping precise financial records, monitoring the company's financial position and creating financial statements.
Learn more about conversion cycle at:
brainly.com/question/30475057
#SPJ4
name three companies who claim they support doing business in an ethical and moral way - not using sweat shops or damaging the environment
The three companies who claim they support doing business in an ethical and moral way - not using sweat shops or damaging the environment are Patagonia, The Body Shop, Toms Shoes.
There are many companies that claim they support doing business in an ethical and moral way - not using sweatshops or damaging the environment. Three such companies are:
1. Patagonia: Patagonia is a popular brand that focuses on making sustainable, eco-friendly clothing and gear. Patagonia is known for using recycled materials, organic cotton, and responsible sourcing to create high-quality products. They are committed to reducing their environmental footprint and promoting fair labor practices.
2. The Body Shop: The Body Shop is a cosmetics and skincare company that is committed to ethical and sustainable practices. They are known for their cruelty-free products and their commitment to fair trade and sustainable sourcing. The Body Shop also supports a number of social and environmental causes.
3. Toms Shoes: Toms Shoes is a shoe company that is committed to social responsibility. For every pair of shoes purchased, Toms donates a pair to a child in need. They also support a number of other social causes, including clean water and disaster relief efforts. Toms uses sustainable materials and is committed to reducing waste and carbon emissions.
To know more about fair labor practices, refer to the link below:
https://brainly.com/question/28197913#
#SPJ11
(A) A garment store sells 500 shirts each month. Each shirt costs Rs 1,000 and the store has an annual holding cost of 25 percent. The fixed cost of a replenishment order is Rs 1,200. The store currently places a replenishment order every month for 500 shirts. a) What is the annual holding and ordering cost? (b) On average, how long does a jacket spend in inventory? (c) If the store wants to minimize ordering and holding cost, what should be order size? Show all calculations. (B) Identify the major factors that affect cycle inventory and that affect Safety inventory.
(a) The annual holding cost = 25% of (cost per shirt * average inventory) where average inventory = order quantity / 2. So, the annual holding cost = 0.25 * 1000 * (500/2) = Rs. 62,500. The annual ordering cost = (demand in units per year / order quantity) * cost per order, which gives (12*500/500)*1200= Rs. 14,400.
Thus, the annual holding and ordering cost is Rs. 62,500 + Rs. 14,400 = Rs. 76,900.(b) On average, a shirt spends half of the order interval in inventory. Since the order interval is one month and the store orders 500 shirts every month, the average inventory will be 500/2 = 250 shirts.
The time a shirt spends in inventory is, therefore, (250 / 500) * 30 = 15 days.(c) Order size can be calculated using the economic order quantity (EOQ) formula as follows:EOQ = √(2DS/H), where D = annual demand, S = fixed cost per order, and H = holding cost per unit per year.
So, EOQ = √(2 * 500 * 1200 / 0.25 * 1000) = √(240000 / 250) = 196 shirts.
Therefore, the store should order 196 shirts to minimize ordering and holding costs.The optimal order size to minimize the holding and ordering costs is 196 shirts.
The annual holding cost is 25% of the cost per shirt multiplied by the average inventory, where the average inventory is equal to the order quantity divided by two. The annual ordering cost is (demand in units per year divided by order quantity) multiplied by the cost per order.
The average inventory of a shirt can be calculated by dividing the order quantity by two since the store places an order for 500 shirts each month. The time a shirt spends in inventory is half of the order interval, which is one month. Therefore, a shirt will spend 15 days in inventory on average. Safety inventory and cycle inventory are the two types of inventory.
The former safeguards against stockouts caused by unpredictable fluctuations in demand, while the latter occurs when companies purchase goods in bulk to take advantage of economies of scale. The factors that influence cycle inventory are the order quantity, production lot size, and the ordering process's frequency. In contrast, the factors that affect safety inventory are demand variability, lead time variability, and service level.
In conclusion, businesses must find the right balance between the two inventory types to ensure that they have sufficient inventory to meet customer demand while avoiding excess inventory.
Learn more about annual holding cost visit:
brainly.com/question/28290608
#SPJ11
On February 1, 2021, Arrow Construction Company entered into a three-year construction contract to build a bridge for a price of $8,240,000. During 2021, costs of $2,080,000 were incurred with estimat
The percentage of completion for the construction contract is 33.33%. The revenue recognized for 2021 is $2,746,320, and the expenses recognized are $2,079,840
The percentage of completion and recognize revenue and expenses for the construction contract using the percentage-of-completion method, we need to determine the progress towards completion based on costs incurred.
Contract Price: $8,240,000
Costs incurred in 2021: $2,080,000
Estimated total costs: $6,240,000
The percentage of completion:
Percentage of Completion = (Costs incurred / Estimated total costs) × 100
Percentage of Completion = (2,080,000 / 6,240,000) × 100
Percentage of Completion = 33.33%
The revenue recognized:
Revenue Recognized = Contract Price × Percentage of Completion
Revenue Recognized = 8,240,000 × 0.3333
Revenue Recognized = $2,746,320
The expenses recognized:
Expenses Recognized = Total estimated costs × Percentage of Completion
Expenses Recognized = 6,240,000 × 0.3333
Expenses Recognized = $2,079,840
Based on the information provided, the percentage of completion for the construction contract is 33.33%. The revenue recognized for 2021 is $2,746,320, and the expenses recognized are $2,079,840.
To know more about percentage click here :
https://brainly.com/question/29006807
#SPJ4
Which of the following represents a form of communication through financial reporting but not through financial statements? OA. Statement of Cash Flows. OB. Statement of financial position. O C. Management Forecasts. O D. Notes to financial statements.
The financial statements are the primary means of communicating financial information to external parties. However, the notes to financial statements are a form of communication through financial reporting, not through financial statements. Correct option is D) Notes to financial statements.
What are the notes to the financial statements? The notes to the financial statements are written disclosures that contain additional information about a company's financial condition. These disclosures are included in a company's financial statement footnotes and are required by generally accepted accounting principles (GAAP). What are the purposes of notes to the financial statements? The following are the purposes of notes to the financial statements: Provide explanatory information that is not presented elsewhere in the financial statements. Disclose important accounting policies and practices that the company has adopted, as well as other significant information that was not disclosed in the financial statements.
Provide information about the company's business operations, accounting policies, and other financial information to help users of financial statements better understand the company's financial condition. Disclose financial statement items that are not recognized in the financial statements and that require disclosure for the financial statements to be fairly presented. The answer, therefore, is option D) Notes to financial statements.
To know more about accounting policies refer to:
https://brainly.com/question/32571795
#SPJ11
P/E, PEG, Dividend rates Calculate the price earnings ratio, PEG ratio, dividend rate, and dividend payout ratio for each of the following companies. Will each ratio consistently rank the companies fr
Price Earnings Ratio (P/E)The price earnings ratio (P/E) is an important ratio to analyze stocks and it compares the current stock price to earnings per share (EPS).
P/E is used to evaluate the stocks of companies based on their earnings. It is calculated by dividing the market value per share by the earnings per share. The formula for calculating P/E ratio is:P/E ratio = Market value per share / Earnings per share (EPS)PEG RatioPEG ratio is a metric to estimate a company's value while taking into account the company's earnings growth.
It is a ratio that compares the P/E ratio to the growth rate of earnings per share (EPS). The formula for calculating the PEG ratio is:PEG Ratio = P/E ratio / Annual EPS Growth RateDividend RatesDividend rates are the percentage of dividend paid out by a company per share of stock. This can be expressed as an annual percentage of the stock price. Dividend rates are paid out by companies to shareholders as a way of returning profits to them.
To know more about stocks visit:-
https://brainly.com/question/31940696
#SPJ11
which of the following statements about span of control is true? a very wide span of control typically equates to low performance. the optimum span of control is 6-10 direct reports, regardless of the situation. a very narrow span of control typically equates to high performance. span of control reflecs where decisions are formally made in organizations.
"span of control reflects where decisions are formally made in organizations" is true about span of control.
The term "span of control" describes how many employees a manager or supervisor can effectively manage. It establishes the hierarchy and authority structure within an organization. The levels of management and decision making in an organization are reflected in the span of control.
A manager has more direct reports when their span of control is broad, and fewer direct reports when their span of control is narrow. Depending on the circumstance, the difficulty of the tasks, and the skills of the manager and the subordinates, the ideal span of control can change. The ideal span of control cannot be standardized and can vary between organizations and industries.
Learn more about span of control at:
brainly.com/question/31967091
#SPJ4
The question is not correctly, paraphrased "which of the following statements about span of control is true?
a very wide span of control typically equates to low performance.
the optimum span of control is 6-10 direct reports, regardless of the situation.
a very narrow span of control typically equates to high performance.
span of control reflecs where decisions are formally made in organizations."
Consider the following information regarding the company's history: • Accounts Receivables total $950,000 • Estimates show that 4% of its receivables will be uncollectible • No balance in the Allowance account Using the allowance method, what is the correct amount of a company's bad debt expense for the year, given the above information? $38,000 $36,480 $42,750 $39,520
The correct amount of the company's bad debt expense for the year, based using the allowance method, is $38,000.
To calculate the correct amount of bad debt expense for the year using the allowance method, we need to determine the estimated uncollectible amount based on the accounts receivable balance and the provided percentage.
Given that the accounts receivable total is $950,000 and it is estimated that 4% of the receivables will be uncollectible, we can calculate the estimated uncollectible amount as follows:
Estimated Uncollectible Amount = Accounts Receivable Total * Estimated Uncollectible Percentage
= $950,000 * 4%
= $38,000
Therefore, the correct amount of the company's bad debt expense for the year, based on the above information and using the allowance method, is $38,000.
It is important to note that the bad debt expense represents the estimated amount of accounts receivable that the company does not expect to collect. This expense is recorded to reflect the potential loss from uncollectible receivables and to properly match revenues with expenses in the accounting period.
To know more about bad debt expense click here
brainly.com/question/30899643
#SPJ11
Smithson, Inc. manufactures lead crystal glasses. The standard direct labor time is 0.4 hour per glass, at a cost of $18 per hour. The actual results for one month's production of 6,900 glasses were 0
The direct labor efficiency variance for the month is -$21,817.60, indicating an unfavorable variance.
To calculate the direct labor efficiency variance, we need to compare the standard hours allowed for the actual output with the actual hours worked and then multiply the difference by the standard labor rate.
Standard labor hours allowed = Standard direct labor time per glass × Actual output
Standard labor hours allowed = 0.6 hours/glass × 6,818 glasses = 4,090.8 hours
Actual labor hours worked = Actual labor time per glass × Actual output
Actual labor hours worked = 0.8 hours/glass × 6,818 glasses = 5,454.4 hours
Direct labor efficiency variance = (Standard labor hours allowed - Actual labor hours worked) × Standard labor rate
Direct labor efficiency variance = (4,090.8 hours - 5,454.4 hours) × $16/hour
Direct labor efficiency variance = -1,363.6 hours × $16/hour
Direct labor efficiency variance = -$21,817.60
Learn more about the efficiency variance at
https://brainly.com/question/28240324
#SPJ4
The question is -
Goldman, Inc. manufactures lead crystal glasses. The standard direct labor time is 0.6 hours per glass, at a cost of $16 per hour. The actual results for one month's production of 6,818 glasses were 0.8 hours per glass, at a cost of $13 per hour.
Calculate the direct labor efficiency variance for the month.
Q1. What do you mean by Ethics? Being the citizen of Oman, identify the unethical practices followed by Omani and on-Oman residents [such as theft ,cheating in the balance and other actions that expartriates do]? Explain how to vanish these unethical practices for the welfare of Omani society? (7 marks)
Ethics is defined as a moral code of conduct that prescribes what is good and what is bad, what is right and what is wrong, what is permissible and what is not.
It is an unwritten rule of the society that everyone must follow. Being the citizen of Oman, some of the unethical practices followed by Omanis and non-Oman residents are as follows: Theft Cheating in the balance Overpricing Low-quality products Lack of professionalism and punctuality Misuse of power in public offices Corruption Manipulation of religious sentiments
Discrimination against expats Exploitation of workers The above-mentioned practices are a threat to the welfare of Omani society and need to be vanished as soon as possible. There are several ways through which we can vanish these unethical practices. Some of them are as follows: First and foremost, we must educate people about ethics and their importance. We should also promote ethical values and principles in our homes, schools, workplaces, and public offices.
This can be achieved through various campaigns, workshops, and seminars. Secondly, we must strictly enforce the law. We should have a strong judicial system that ensures that those who engage in unethical practices are punished accordingly. The punishment should be severe enough to deter others from engaging in such practices. Thirdly, we must cultivate a culture of transparency and accountability.
This means that public officials should be held accountable for their actions, and there should be a system in place that allows people to report corruption without fear of retribution. In conclusion, if we are to achieve the welfare of Omani society, we must work together to eliminate unethical practices. This can only be achieved if we are committed to promoting ethics and enforcing the law.
Learn more about Ethics here.
https://brainly.com/question/26273329
#SPJ11
French and
Raven (1959) developed a taxonomy to classify different types of
power according to their source. This taxonomy includes five
different types of power (List
and
explain those five
types).
French and Raven (1959) developed a taxonomy to classify different types of power according to their source. This taxonomy includes five different types of power. They are as follows:
coercive power
Referent power
Reward power
Expert power
Legitimate power
coercive power- Coercive power is power that comes from the belief that an individual can harm others and control their outcomes. The coercive power is, thus, directed to get individuals to avoid the undesirable outcomes.
Referent power- Referent power is the power that comes from identification with an individual who has attractive resources or personal traits. These traits may include charisma, personality, and other characteristics.
Reward power- Reward power is the power that comes from the ability to provide rewards to others. It is based on the belief that people will respond well when they receive rewards.
Expert power- Expert power is power that comes from an individual’s specialized knowledge or skills. Expert power is a power that is derived from the belief that others depend on the expertise or information of an individual.
Legitimate power- Legitimate power is power that comes from a formal position in an organization or social structure. It is power that is based on the perception that an individual has the right to prescribe the behaviors of others based on the position that the individual holds.
for such more questions on taxonomy
https://brainly.com/question/30431746
#SPJ8
Janet has $4,000 in undergraduate education expenses. Which of the following is her best choice for a tax credit based on this, if her adjusted gross income is $50,000? a. Student interest deduction b. American Opportunity Credit c. Student tuition deduction d. Lifetime Learning Credit
American Opportunity Credit. This credit provides a higher potential credit amount, is specifically designed for undergraduate education expenses, and offers the possibility of a partial refund if the credit exceeds the tax liability.
Which of the following is Janet's best choice for a tax credit based on her $4,000 undergraduate education expenses and adjusted gross income of $50,000: Student interest deduction, American Opportunity Credit, Student tuition deduction, Lifetime Learning Credit?To determine the best choice for a tax credit based on Janet's $4,000 undergraduate education expenses and her adjusted gross income of $50,000, let's consider the available options:
Student interest deduction:
The student interest deduction allows individuals to deduct up to $2,500 of interest paid on qualified student loans. It does not directly apply to undergraduate education expenses. Therefore, this option is not applicable in Janet's case.
American Opportunity Credit:
The American Opportunity Credit is a tax credit available to eligible students for qualified education expenses, including undergraduate education expenses. It provides a credit of up to $2,500 per year for the first four years of post-secondary education.
This credit is partially refundable, meaning it can reduce tax liability and result in a refund if the credit exceeds the tax owed. Given that Janet has undergraduate education expenses, the American Opportunity Credit seems to be a suitable choice.
Student tuition deduction:
The student tuition deduction allows individuals to deduct qualified tuition and related expenses, but it is not as beneficial as the American Opportunity Credit. This deduction is generally not as advantageous as a tax credit since it reduces taxable income rather than directly reducing the tax liability. Therefore, this option is not as favorable as the American Opportunity Credit.
Lifetime Learning Credit:
The Lifetime Learning Credit is another tax credit for eligible students and lifelong learners. It provides a credit of up to $2,000 per year for qualified education expenses, including undergraduate and graduate education expenses.
However, it is non-refundable, meaning it can only reduce tax liability and cannot result in a refund. Compared to the American Opportunity Credit, the Lifetime Learning Credit offers a lower maximum credit amount and is not as advantageous in Janet's case.
Based on the available options and Janet's situation, the best choice for a tax credit would be:
Learn more about American Opportunity Credit
brainly.com/question/30392255
#SPJ11
36.ROA (return on assets) is measured by Earnings before
interest & tax / Average total assets
Assume ROA is less than 100% and that the cash balance remains
positive.
State the effect the followi
ROA (return on assets) is measured by Earnings before interest & tax / Average total assets. If the ROA is less than 100% and the cash balance remains positive, then the following will occur:
1. There will be a lower net income because the Earnings before interest and tax would be less than the Average total assets.
2. There will be a reduction in shareholder returns because they would receive less dividend on their investment.
3. There will be a decrease in assets because there would be a decrease in the cash balance if the company doesn't reinvest its earnings.
4. The company may face difficulties in repaying its debts since its earnings are insufficient.
5. The company will have a hard time attracting new investors because its returns are low compared to competitors.
6. The management may need to find ways to cut expenses and improve the company's profitability.
7. The company's growth potential is limited because the returns are lower than expected.
8. The company's liquidity position is still good because its cash balance is positive, but the management needs to manage it wisely to ensure the company's long-term survival.
To know more about ROA visit:
https://brainly.com/question/17029474
#SPJ11
Liabilities Assets Cash $55,000 Current Liabilities $60,000 Accounts Receivable $30,000 Common Stock $200,000 Inventory $70,000 Retained Earnings $125,000 Land $30,000 Building $200,000 Total Assets $
The calculation of total liabilities is done by adding up all the liabilities of a company. Liabilities are the amounts owed to creditors by the company. These can be short-term (due within one year) or long-term (due after one year).
calculate the total liabilities from the given information. Total liabilities = current liabilities Current liabilities are the liabilities that are expected to be paid within one year. The given current liabilities are $60,000.Therefore,Total liabilities = $60,000.The calculation of total assets is done by adding up all the assets of a company. Assets are the resources owned by the company that are expected to provide a future economic benefit.
These can be current (expected to be sold or used within one year) or long-term (expected to provide a benefit for more than one year).Total assets = cash + accounts receivable + inventory + land + building Total assets = $55,000 + $30,000 + $70,000 + $30,000 + $200,000Total assets = $385,000Therefore,Total liabilities = $60,000Total assets = $385,000.
To know more about liabilities refer here : brainly.com/question/14287268
#SPJ11
You have been late in repaying a prior credit purchase with one of your suppliers and asked them to accept your promissory note for 54,000. That supplier agreed to an interest rate of 6.5% and a repayment period of 6 months. How much will you owe this supplier at the end of that period?
The amount that the supplier will owe at the end of the period is $55,755
The value of the promissory note is $54,000, the interest rate is 6.5%, and the repayment period is 6 months.
To find:
Interest on the promissory note = Principal x Rate x Time
First, we need to calculate the interest payable for 6 months
.Using the above formula,
Interest = 54,000 x 6.5% x 6/12= $1,755
Total amount payable = Principal + Interest= $54,000 + $1,755= $55,755
Therefore, the amount that the supplier will owe at the end of the period is $55,755.
Learn more about interest visit:
brainly.com/question/30393144
#SPJ11