Captain C-Bo takes his passengers on a deep-sea fishing trip where he expects them to catch red snappers at a rate of two fish per hour. Deep-sea fishing is done in areas of the ocean that are over 30 meters deep, where there are several types of fish, including red snapper.
The red snapper is a common catch in deep-sea fishing trips as it's a popular and delicious fish. It's found in deep waters from 30 feet to 200 feet in depth, typically near the bottom, and can weigh up to 40 pounds. Red snapper is a popular catch in deep-sea fishing, and because of its popularity, the fishing industry has developed specific rules and regulations to protect it and ensure it's sustainably fished.
In deep-sea fishing, the passengers use a fishing rod and bait to catch fish. The captain knows that each passenger will catch red snapper at a rate of two fish per hour. Thus, if there are 10 passengers on the boat, they would catch 20 fish per hour. If the trip lasts for four hours, each passenger will have caught eight fish. If the trip lasts for eight hours, each passenger will have caught 16 fish.
Thus, it's essential to understand the duration of the fishing trip to determine the catch. In conclusion, on a deep-sea fishing trip, passengers can expect to catch red snapper. If there are 10 passengers, they will catch 20 fish per hour, with each passenger catching two fish. The duration of the trip will determine the overall catch.
Learn more about fishing industry here ;
https://brainly.com/question/31561888
#SPJ11
Explain why locations near the North Pole experience weeks of sunlight in June with no sunsets.
Answer:
It happens because the Earth is tilted on its axis around 23 degrees therefore the sun normally never sets at north Pole in summers. The sun doesn't set at Arctic Circle on North pole from about April 19 to August 23 each year due to this phenomenon.
Table is in the picture. and will mark brainstest.
Here is the question
Based on the information in the table, which combination of materials would make the most conductive and best insulated wire?
A) A zinc wire with glass insulation
B) A copper wire with rubber insulation
C) A plastic wire with plastic insulation
D) An aluminum wire with plastic insulation
In a particular photoelectric effect experiment, photons with an energy of 4.00 eV are incident on a metal surface, producing photoelectrons with a maximum kinetic energy of 2.00 eV.
a) What is the work function of the metal? (in eV)
b) If the photon energy is adjusted to 6.10 eV, what will be the maximum kinetic energy of the photoelectrons? (answer in eV)
a) The work function of the metal is 2.00 eV.
b) When the photon energy is adjusted to 6.10 eV, the maximum kinetic energy of the photoelectrons will be 4.10 eV.
a) The work function (Φ) of the metal can be determined by subtracting the maximum kinetic energy (KEmax) of the photoelectrons from the energy of the incident photons (Ephoton).
Given:
The energy of incident photons (Ephoton) = 4.00 eV
The maximum kinetic energy of photoelectrons (KEmax) = 2.00 eV
To find the work function (Φ):
Φ = Ephoton - KEmax
Φ = 4.00 eV - 2.00 eV
Φ = 2.00 eV
Therefore, the work function of the metal is 2.00 eV.
b) To calculate the maximum kinetic energy of photoelectrons when the photon energy is adjusted to 6.10 eV, we use the same formula as in part (a).
Given:
The energy of incident photons (Ephoton) = 6.10 eV
To find the maximum kinetic energy of photoelectrons (KEmax):
KEmax = Ephoton - Φ
Using the previously determined work function (Φ) of 2.00 eV:
KEmax = 6.10 eV - 2.00 eV
KEmax = 4.10 eV
Therefore, when the photon energy is adjusted to 6.10 eV, the maximum kinetic energy of the photoelectrons will be 4.10 eV.
a) The work function of the metal is 2.00 eV.
b) When the photon energy is adjusted to 6.10 eV, the maximum kinetic energy of the photoelectrons will be 4.10 eV.
To learn more about kinetic, visit
https://brainly.com/question/1135367
#SPJ11
In your own words, tell me how an element, molecule, and compound are used to make different substances. All three must be mentioned in order to receive full credit.
Answer:
When atoms from different elements are joined together in groups, they form molecules. The atoms in molecules bind together chemically, which means that the atoms cannot be separated again by physical means, such as filtration. The molecule has different properties from the elements from which is was made.
Explanation:
How does burning wood compare to the chemical reactions in trees that make them grow?
Answer:
Log burning in a fire. Burning wood is an example of a chemical reaction in which wood in the presence of heat and oxygen is transformed into carbon dioxide, water vapor, and ash.
Explanation:
_______ are considered to be fluids.
Solids
Liquids only
Gases only
Liquids and gases
Answer:
liquids and gases
Explanation:
Liquids and gases are considered to be fluids because they yield to shearing forces, whereas solids resist them.
a car moving south speeds up from 10 m/s to 40 m/s in 15 seconds. what is the car’s acceleration?2 m/s215 m/s230 m/s250 m/s2
The acceleration of this car include the following: A. 2 m/s².
How to calculate the acceleration of this car?In Science, the acceleration of a car can be calculated by using this mathematical expression:
a = (V - U)/t
Where:
a represents the acceleration measured in meters per seconds square (m/s²).V represents the final velocity measured in meters per seconds (m/s).U represents the initial velocity measured in meters per seconds (m/s).t represents the time measured in seconds.By substituting the given parameters into the acceleration formula, we have;
Acceleration, a = (40 - 10)/15
Acceleration, a = 30/15
Acceleration, a = 2 m/s².
Read more on acceleration here: brainly.com/question/24728358
#SPJ4
what is the minimum possible coefficient of static friction between thebike tires and the ground?
The minimum possible coefficient of static friction between bike tires and the ground is zero. This means that there is no requirement for static friction to exist in order for the bike to remain stationary or in motion.
Static friction is the force that prevents two surfaces from sliding against each other when there is no relative motion between them. It depends on the nature of the surfaces in contact and the force pressing them together. In the case of bike tires and the ground, the coefficient of static friction measures the ratio of the maximum static frictional force to the normal force between the tire and the ground.
If the coefficient of static friction were zero, it would imply that there is no need for static friction to keep the bike tires from slipping. This situation can occur when the surfaces are extremely smooth or when other forces, such as rolling resistance or air resistance, provide enough stability to maintain traction.
However, it's important to note that a zero coefficient of static friction can also indicate a lack of friction altogether, which could make it impossible for the bike tires to maintain contact with the ground and result in sliding or loss of control.
Learn more about static friction here:
https://brainly.com/question/17140804
#SPJ11
a particular can of soda has an internal absolute pressure of 3.0 atm. 11. if the can were located at sea level, what is the gauge pressure, in atm, that someone would measure for the can?
The gauge pressure that someone would measure for the can of soda located at sea level is 2.0 atm.
Gauge pressure is the pressure measured relative to atmospheric pressure. At sea level, the atmospheric pressure is approximately 1.0 atm. To find the gauge pressure, we subtract the atmospheric pressure from the internal absolute pressure.
Gauge pressure = Internal absolute pressure - Atmospheric pressure
Given that the internal absolute pressure is 3.0 atm and the atmospheric pressure is 1.0 atm, we can substitute these values into the equation:
Gauge pressure = 3.0 atm - 1.0 atm = 2.0 atm
If the can of soda is located at sea level, someone would measure a gauge pressure of 2.0 atm. Gauge pressure represents the pressure above or below atmospheric pressure, and in this case, the can has an internal pressure that is 2.0 atm higher than the atmospheric pressure at sea level.
To know more about pressure visit :
https://brainly.com/question/28012687
#SPJ11
derive the error propagation equation for δk (the kinetic energy).
The error propagation equation for δk (the kinetic energy) is:
δk = √((1/4v^4) * δm² + m²v² * δv²).
To derive the error propagation equation for δk (the kinetic energy), we first need to understand what error propagation is.
Error propagation is a method used to estimate the uncertainty of a quantity that is derived from several other measured quantities that have uncertainties. In other words, it is a way to determine how the errors of the input quantities affect the error of the output quantity.
Now let's derive the error propagation equation for δk (the kinetic energy):
The kinetic energy (k) of an object can be calculated using the following equation:
k = 1/2mv^2
Where m is the mass of the object and v is its velocity.
We can use the standard error propagation formula to find the uncertainty in k.
This formula is given as:
δk = √((∂k/∂m)² * δm² + (∂k/∂v)² * δv²)
where δm and δv are the uncertainties in the measured values of m and v, respectively.
To find ∂k/∂m and ∂k/∂v, we need to take the partial derivatives of k with respect to m and v.
∂k/∂m = 1/2v²
∂k/∂v = mv
Now we can substitute these values in the error propagation equation:
δk = √((1/2v²)² * δm² + (mv)² * δv²)
Therefore, the error propagation equation for δk (the kinetic energy) is:
δk = √((1/4v^4) * δm² + m²v² * δv²)
To learn more about error propagation , visit:
https://brainly.com/question/30765830
#SPJ11
if a buffer solution is 0.210 m in a weak acid ( a=6.7×10−5) and 0.470 m in its conjugate base, what is the ph?
If a buffer solution is 0.210 m in a weak acid and 0.470 m in its conjugate base. The pH of the buffer solution is approximately 4.53.
To determine the pH of a buffer solution, we can use the Henderson-Hasselbalch equation, which is given by
pH = pKa + log ([A-] / [HA])
Where:
pH is the logarithmic measure of the hydrogen ion concentration in the solution.
pKa is the negative logarithm of the acid dissociation constant (Ka) of the weak acid.
[A-] is the concentration of the conjugate base.
[HA] is the concentration of the weak acid.
In this case, the concentration of the weak acid ([HA]) is 0.210 M, and the concentration of the conjugate base ([A-]) is 0.470 M. The acid dissociation constant (Ka) is given as 6.7 × [tex]10^{-5}[/tex].
First, let's calculate the pKa
pKa = -log(Ka) = -log(6.7 × [tex]10^{-5}[/tex]) = 4.18
Next, substitute the given values into the Henderson-Hasselbalch equation:
pH = 4.18 + log(0.470 / 0.210) = 4.18 + log(2.238) = 4.18 + 0.35
pH = 4.53
Therefore, the pH of the buffer solution is 4.53.
To know more about pH here
https://brainly.com/question/17742323
#SPJ4
A laptop battery has an emf of 11.4 V. The laptop uses 0.80 A while running. Part A How much charge moves through the battery each second? Express your answer with the appropriate units. By how much does the electric potential energy of this charge increase as it moves through the battery? Express your answer with the appropriate units.
(a) The charge moving through the battery each second is 0.80 Coulombs. (b) The electric potential energy of the charge increases by 9.12 Joules as it moves through the battery.
Part A:
The charge moving through the battery each second can be calculated using the formula:
Q = I * t
Where Q is the charge, I is the current, and t is the time.
Given that the laptop uses 0.80 A while running, the charge moving through the battery each second can be calculated as:
Q = (0.80 A) * (1 s)
Calculating this expression gives us:
Q = 0.80 C
Therefore, the charge moving through the battery each second is 0.80 Coulombs.
Part B:
The change in electric potential energy as the charge moves through the battery can be calculated using the formula:
ΔPE = Q * ΔV
Where ΔPE is the change in electric potential energy, Q is the charge, and ΔV is the change in voltage.
In this case, since the battery has an emf (electromotive force) of 11.4 V, the change in voltage is equal to the emf. Therefore, we have:
ΔPE = Q * emf
Substituting the known values, we have:
ΔPE = (0.80 C) * (11.4 V)
Calculating this expression gives us:
ΔPE = 9.12 J
Therefore, the electric potential energy of the charge increases by 9.12 Joules as it moves through the battery.
(a) The charge moving through the battery each second is 0.80 Coulombs.
(b) The electric potential energy of the charge increases by 9.12 Joules as it moves through the battery.
To know more about potential energy ,visit:
https://brainly.com/question/21175118
#SPJ11
Windows having double glass panes with some space between them is called double glazing. Why do windows in cold countries have double glazing?
options:
For the conduction of heat
For the convection of heat
For the radiation of heat
For the insulation of heat
Answer: for insulation of heat
Explanation:
Windows in cold countries have double glazing windows to provide a barrier against the outside temperature by creating a buffer zone between two glasses.
The air or any other gas-filled between the glasses act as an insulator and offer great resistance to outside temperature thereby maintaining the inside temperature intact.
Which graph BEST represents the relationship between the potential energy and kinetic energy of a cannon ball as it flies over the
bow of a ship and then falls onto the beach on the other side? Note that the dotted line represents potential energy while the solid
line represents kinetic energy
Answer:C
Explanation:I think sorry if it’s wrong
Explain why is the temperature of a hot tea higher than the temperature of iced tea?
Answer:
Because the hot tea is hot from a microwave or coffee machine when iced tea is cold from ice in the tea.
Explanation:
A point source emits electromagnetic radiation uniformly in all directions If the power output of the source is 960 W what are the amplitudes of the electric and magnetic fields in the wave at a distance of 15.0 m from the source? (The surface area of a sphere that has radius Ris 4nR? e0 = 8.854x10 C? /(N-m') . #to 4tx10 T-mA .) Ans. electric field amplitude_LbQNlc_ 2 magnetic field amplitude _5_3.3XLO
The electric and magnetic field amplitudes of an electromagnetic wave can be calculated using the power output of the source and the distance from the source. We can use the formula:
P = (1/2)ε₀cE₀²A,
where P is the power output, ε₀ is the permittivity of free space (8.854x10⁻¹² C²/(N·m²)), c is the speed of light (3x10⁸ m/s), E₀ is the electric field amplitude, and A is the surface area of a sphere with radius R.
First, let's calculate the surface area of the sphere at a distance of 15.0 m:
A = 4πR² = 4π(15.0 m)² ≈ 2827.43 m².
Now, rearranging the formula, we can solve for E₀:
E₀² = (2P) / (ε₀cA) = (2 * 960 W) / (8.854x10⁻¹² C²/(N·m²) * 3x10⁸ m/s * 2827.43 m²).
Calculating this expression gives us E₀² ≈ 8.76x10⁻⁶ N²/C².
Taking the square root, we find:
E₀ ≈ 9.36x10⁻⁴ N/C.
Finally, we can use the relationship between the electric and magnetic field amplitudes in an electromagnetic wave:
B₀ = E₀ / c,
where B₀ is the magnetic field amplitude.
Substituting the values, we get:
B₀ ≈ (9.36x10⁻⁴ N/C) / (3x10⁸ m/s) ≈ 3.12x10⁻¹² T.
Therefore, the electric field amplitude at a distance of 15.0 m from the source is approximately 9.36x10⁻⁴ N/C, and the magnetic field amplitude is approximately 3.12x10⁻¹² T.
To know more about electromagnetic visit :
https://brainly.com/question/1408043
#SPJ11
when heating a sample of liquid water, which of the following best describes the point at which boiling begins?when heating a sample of liquid water, which of the following best describes the point at which boiling begins?
When heating a sample of liquid water, the point at which boiling begins is best described as the temperature at which the vapor pressure of the liquid equals the atmospheric pressure.
The point at which boiling begins is when the vapor pressure of the liquid equals the atmospheric pressure. At this point, the liquid can no longer hold any more vapor and bubbles of vapor form and rise to the surface. The temperature at which this occurs is called the boiling point.
For water at sea level, the boiling point is 100°C (212°F). However, the boiling point of water can vary depending on the atmospheric pressure. At higher altitudes, the atmospheric pressure is lower, so the boiling point of water is lower. For example, at the top of Mount Everest, the boiling point of water is about 70°C (160°F).
The boiling point of a liquid can also be affected by the presence of impurities. For example, salt water has a higher boiling point than pure water. This is because the salt molecules interfere with the formation of water vapor.
To learn more about atmospheric pressure click here
https://brainly.com/question/1391071
#SPJ11
A video game regularly costs $29.95 is on sale for 15% off. About how much is the sale price of the game is you include 8% sales tax?
Answer:
Hereeeeeeeeeeeeeeeeeee
How far apart would two 100 kg persons need to be so that the force they exert on each other is equal to 1N? You can assume they are point masses, having mass but no size. Q1: A1m B6.672x10-7 m 8.17x10-4 m D100 nm
The distance between the two 100 kg persons needs to be approximately 8.17 x 10^-4 meters (or 0.817 mm) in order for the force they exert on each other to be equal to 1 N.
To calculate the distance between two 100 kg persons so that the force they exert on each other is equal to 1 N, we can use Newton's law of universal gravitation.
The formula for gravitational force (F) between two objects is:
F = (G * m1 * m2) / r^2
where G is the gravitational constant (approximately 6.672 x 10^-11 N·m^2/kg^2), m1 and m2 are the masses of the objects, and r is the distance between the centers of the objects.
In this case, we want the force to be 1 N, and both persons have a mass of 100 kg. Substituting these values into the formula, we get:
1 N = (6.672 x 10^-11 N·m^2/kg^2 * 100 kg * 100 kg) / r^2
Simplifying the equation:
1 N = (6.672 x 10^-7 N·m^2) / r^2
Rearranging the equation to solve for the distance (r):
r^2 = (6.672 x 10^-7 N·m^2) / 1 N
r^2 = 6.672 x 10^-7 m^2
Taking the square root of both sides:
r ≈ 8.17 x 10^-4 m
Therefore, the distance between the two 100 kg persons needs to be approximately 8.17 x 10^-4 meters (or 0.817 mm) in order for the force they exert on each other to be equal to 1 N. Option B, 6.672 x 10^-7 m, appears to be a typographical error as it corresponds to the value of the gravitational constant rather than the distance.
To learn more about Distance click here
https://brainly.com/question/13034462
#SPJ11
You throw a baseball with a mass of 0.5 kg. The ball leaves your hand with a speed of 35 m/s. Calculate the kinetic energy. (SHOW ALL WORK)
Answer:
The kinetic energy of the baseball is 306.25 joules.
Explanation:
SInce the baseball can be considered a particle, that is, that effects from geometry can be neglected, the kinetic energy ([tex]K[/tex]), in joules, is entirely translational, whose formula is:
[tex]K = \frac{1}{2}\cdot m\cdot v^{2}[/tex] (1)
Where:
[tex]m[/tex] - Mass, in kilograms.
[tex]v[/tex] - Speed, in meters per second.
If we know that [tex]m = 0.5\,kg[/tex] and [tex]v = 35\,\frac{m}{s}[/tex], then the kinetic energy of the baseball thrown by the player is:
[tex]K = \frac{1}{2}\cdot m \cdot v^{2}[/tex]
[tex]K = 306.25\,J[/tex]
The kinetic energy of the baseball is 306.25 joules.
Red light has a wavelength of 650 nm. Green light has a wavelength of 550 nm. The speed of light is 3×108 m/s
Frequency of the red light = 4.615*10^14 s^-1
Frequency of the green light = 5.455*10^14 s^-1
You are driving to school and approach a red light. How fast would you need to be going to make the light appear to be green? Give your answer in m/s. It will also need scientific notation.
To make the red light appear green, you would need to be traveling at a speed of approximately 2.727×10⁸ m/s.
How to make the red light appear green?The color of light is determined by its wavelength. Red light has a longer wavelength than green light, with the given values of 650 nm and 550 nm, respectively.
The frequency of light is inversely proportional to its wavelength, so we can use the formula:
frequency = speed of light / wavelength
Given that the speed of light is 3×10⁸ m/s, we can calculate the frequencies of red and green light:
Frequency of red light = (3×10⁸ m/s) / (650×10⁻⁹ m) = 4.615×10¹⁴ s⁻¹
Frequency of green light = (3×10⁸ m/s) / (550×10⁻⁹ m) = 5.455×10¹⁴ s⁻¹
To perceive the red light as green, we need to match the frequencies. Since the speed of light remains constant, we can equate the two frequencies:
(3×10⁸ m/s) / (λ_red) = (3×10⁸ m/s) / (λ_green)
Simplifying the equation, we find:
λ_red = λ_green
From this, we can determine the speed required to make the red light appear green:
v = (λ_red - λ_green) / λ_green = (650×10⁻⁹ m - 550×10⁻⁹ m) / 550×10⁻⁹ m = 100×10⁻⁹ m / 550×10⁻⁹ m
v ≈ 2.727×10⁸ m/s
Therefore, in order for the red light to appear green, you would need to be moving at a velocity of approximately 2.727×10⁸ m/s.
To know more about wavelength, refer here:
https://brainly.com/question/7143261#
#SPJ4
A softball player is running at 4.88 m/sec when she slides into second base coming to a stop in .872 seconds. How far did she slide, and what was her acceleration?
Answer:
d=v1t - .5at^2
d=4.88 x .872 - 0.5 x (4.88/0.872) x 0.872^2
d=4.255 - 2.12
d= 2.135m
Explanation:
acceleration is negative because she is slowing down.
A shopper standing 3.00 m from a convex security mirror sees his image with a magnification of 0.250. How far is his image from the mirror's surface and is it real or virtual?
o 8.33 cm, virtual o 8.33 cm, real o 75.0 cm, virtual o 75.0 cm. real
The image of the shopper is 75.0 cm from the mirror's surface, and it is virtual.
The magnification (m) of an image formed by a convex mirror is given by the formula:
m = -d_i / d_o,
where d_i is the distance of the image from the mirror's surface and d_o is the distance of the object from the mirror's surface. In this case, the magnification is given as 0.250.
Given that the shopper is standing 3.00 m from the convex mirror (d_o = 3.00 m) and the magnification is 0.250, we can rearrange the formula to solve for d_i:
d_i = -m * d_o.
Substituting the values into the formula:
d_i = -0.250 * 3.00,
= -0.75 m.
The negative sign indicates that the image is virtual, meaning it cannot be projected onto a screen. Taking the absolute value, the image is 0.75 m from the mirror's surface.
Converting 0.75 m to centimeters, we get 75.0 cm.
The image of the shopper is located 75.0 cm from the convex mirror's surface, and it is a virtual image. This calculation utilizes the magnification formula for a convex mirror to determine the distance of the image based on the given magnification and object distance.
To know more about mirror, visit
https://brainly.com/question/1126858
#SPJ11
Does Direction matter when you are measuring momentum
Answer:
Yes
Momentum is a vector quantity
Explanation:
A vector quantity is a quantity that has both magnitude and direction
So definitely direction matters
Answer:
no on edge 2021
Explanation:
A. 180Ω resistor is in series with a 0.150H inductor and a 0.600μF capactor. Part A
Compute the impedance of the circuit at a frequency of f1=500 Hz and at a frequency of f2 =1000 Hz. Enter your answer in ohms separated by comma
Z1, Z2 = ____Ω. Part B In each case; compule the phase angle of the source voltage with respect to the current. Enter your answer in degrees separated by comma.
At a frequency of 500 Hz, the impedance of the circuit is approximately 180.026Ω, and the phase angle of the source voltage with respect to the current is approximately 0.637°.
A) To compute the impedance of the circuit, we use the formula:
Z = √(R² + (XL - XC)²)
Where Z is the impedance, R is the resistance, XL is the inductive reactance, and XC is the capacitive reactance.
Given:
Resistance (R) = 180Ω
Inductance (L) = 0.150H
Capacitance (C) = 0.600μF
= 0.600 × 10⁻⁶ F
At frequency f1 = 500 Hz:
XL = 2πf1L
XC = 1/(2πf1C)
Calculating XL and XC:
XL = 2π(500 Hz)(0.150 H)
= 471 Ω
XC = 1/(2π(500 Hz)(0.600 × 10⁻⁶ F))
≈ 5307 Ω
Using the formula for impedance:
Z1 = √(R² + (XL - XC)²)
= √(180² + (471 - 5307)²)
≈ 180.026 Ω
At frequency f2 = 1000 Hz:
XL = 2πf2L
XC = 1/(2πf2C)
Calculating XL and XC:
XL = 2π(1000 Hz)(0.150 H)
= 942 Ω
XC = 1/(2π(1000 Hz)(0.600 × 10⁻⁶ F))
≈ 2653 Ω
Using the formula for impedance:
Z2 = √(R² + (XL - XC)²)
= √(180² + (942 - 2653)²)
≈ 180.134 Ω
B) The phase angle (θ) of the source voltage with respect to the current can be calculated using the formula:
θ = atan((XL - XC)/R)
At frequency f1:
θ1 = atan((XL - XC)/R)
= atan((471 - 5307)/180)
≈ 0.637°
At frequency f2:
θ2 = atan((XL - XC)/R)
= atan((942 - 2653)/180)
≈ 0.318°
At a frequency of 500 Hz, the impedance of the circuit is approximately 180.026Ω, and the phase angle of the source voltage with respect to the current is approximately 0.637°. At a frequency of 1000 Hz, the impedance of the circuit is approximately 180.134Ω, and the phase angle is approximately 0.318°.
To know more about Impedance visit:
https://brainly.com/question/15110043
#SPJ11
a hydrogen atom in the n=4 state decays to the n=1 state. what is the wavelength of the photon that the hydrogen atom emits? use hc=1240 nm ev.
A hydrogen atom in the n=4 state decays to the n=1 state. The wavelength of the photon that the hydrogen atom emits is 97.2 nm.
To calculate the wavelength of the photon emitted when a hydrogen atom transitions from the n=4 state to the n=1 state, we can use the Rydberg formula:
1/λ = R * (1/n₁² - 1/n₂²)
Where:
λ is the wavelength of the photon
R is the Rydberg constant for hydrogen (approximately 1.097 x 10⁷ m⁻¹)
n₁ is the initial energy level (n=4)
n₂ is the final energy level (n=1)
1/λ = 1.097 x 10⁷ m⁻¹ * (1/16 - 1)
1/λ = 1.097 x 10⁷ m⁻¹ * (-15/16)
λ = -0.972×10⁷ m⁻¹
Since wavelength cannot be negative, we take the absolute value
λ ≈ 97.2 nm.
Therefore, the wavelength of the photon emitted by the hydrogen atom is approximately 97.2 nm.
To know more about hydrogen atom here
https://brainly.com/question/30886690
#SPJ4
A force of 355 N is applied to an object that accelerates at a rate of 7.8 m/sec2 . What is the mass of the object ?
Answer:
A force of 355 N is applied to an object that accelerates at a rate of 7.8 m/sec2 . What is the mass of the object ?
Explanation:
calculate the magnetic flux if the magnetic field vector is b=(-20 t)i (10 t)k and the area vector is a=(-50 m2)j (8 m2) k.
The magnetic flux if the magnetic field vector is b=(-20 t)i (10 t)k and the area vector is a=(-50 m2)j (8 m2) k is 1000 t j + 80 t k.
The magnetic flux is calculated as follows:
[tex]\phi = \vec{B} \cdot \vec{A}[/tex]
where
B is the magnetic field vector,
A is the area vector, and ϕ is the magnetic flux.
In this case, we have:
[tex]\vec{B} = (-20 t)i + (10 t)k[/tex]
and
[tex]\vec{A} = (-50 m^2)j + (8 m^2) k[/tex]
Substituting these values into the equation for magnetic flux, we get:
[tex]\begin{aligned}\phi &= (-20 t)i + (10 t)k \cdot (-50 m^2)j + (8 m^2) k \\&= -20 t \cdot (-50 m^2)j + 10 t \cdot 8 m^2 k \\&= 1000 t j + 80 t k\end{aligned}[/tex]
Therefore, the magnetic flux is a vector with a magnitude of 1000t and a direction of j+k. Note that the magnetic flux is a scalar quantity, so the vector notation is only used to indicate the direction of the flux.
The magnetic flux can also be calculated as follows:
[tex]\phi = \int_A \vec{B} \cdot d\vec{S}[/tex]
where A is the area of the surface, and d
S is a small element of surface area. In this case, the area of the surface is a rectangle with dimensions 50×8 meters. The magnetic field is uniform, so we can calculate the magnetic flux as follows:
[tex]\begin{aligned}\phi &= \int_A \vec{B} \cdot d\vec{S} \\&= \int_{-50}^{50} \int_{-8}^8 (-20 t)i + (10 t)k \cdot dx dy \\&= \int_{-50}^{50} (-20 t) \cdot dy + \int_{-8}^8 (10 t) \cdot dx \\&= 1000 t j + 80 t k\end{aligned}[/tex]
The answer is: 1000 t j + 80 t k
To know more about the magnetic flux refer here :
https://brainly.com/question/15011681#
#SPJ11
The greater the mass of an object being moved, the greater amount of force needed to move the object,
Answer:
It's often called the law of inertia. Acceleration is produced when a force acts on a mass. The greater the mass (of the object being accelerated) the greater the amount of force needed (to accelerate the object). ... A more massive object has a greater tendency to resist changes in its state of motion.
Explanation:
Answer: It's often called the law of inertia. Acceleration is produced when a force acts on a mass. The greater the mass (of the object being accelerated) the greater the amount of force needed (to accelerate the object). ... A more massive object has a greater tendency to resist changes in its state of motion.
HOPE THIS HELPS
How are wavelength, pitch, frequency, and energy all related?
Answer:
he word that musicians use for frequency is pitch. The shorter the wavelength, the higher the frequency, and the higher the pitch, of the sound. In other words, short waves sound high; long waves sound low. ... In other words, it sounds higher
Explanation: