On a given microscope, the numerical apertures of the condenser and low-power objective lenses are 1.25 and 0.25. You are supplied with a filter that selects a wavelength of 520nm.

Required:
a. What is the limit of resolution on this microscope?
b. Will you be able to distinguish 2 points that are 300nm apart as being separate, or will they blur into one?

The statement that describes the types of energy emitted by the Sun is that It emits all wavelengths in the electromagnetic spectrum, therefore the correct answer is option B.

Electromagnetic radiation is a type of energy radiation produced by the propagation of electromagnetic waves that are produced for natural as well as anthropogenic reasons.

As given in the problem we have to find out which  statements describe the types of energy emitted by the Sun from the given list of options,

Thus, Sun emits all wavelengths in the electromagnetic spectrum, which means that option B is the appropriate response.

To learn more about electromagnetic radiation, refer to the link ;

brainly.com/question/10759891

#SPJ1

Answer:

1.67m

5m/s

Explanation:

Given parameters:

Wavelength of the wave = 3m

Speed of the wave  = 5m/s

Unknown:

Frequency of the wave  = ?

Speed of the water waves  = ?

Solution:

The distance between crest and the adjacent trough of water waves is known as the wavelength of a wave.

  To find the frequency ;

         V = f∧

V is the speed of the wave

f is the frequency

∧ is the wavelength

   Insert the parameters and find the frequency;

         f  = V/ ∧   = 5 / 3  = 1.67Hz

The rate at which the wave passed a given point is the speed of the wave and it is 5m/s

Answer:

a. The initial velocity will decrease until it reaches its final velocity/maximum (which is 0).

b. The acceleration always remain constant.

Answer:

Explanation:

See the file attached .

b ) Range of projectile

= u²sin2θ / g

= 42² sin32 x 2 / g

= 42² sin64 / 9.8

= 161.8 m

c )

Max height = u² sin²32 / 2 g

= 42² sin²32 / 2x 9.8

= 25.27  m .

Answer:

I'm pretty sure that the answer is C. Hope this helps.

Explanation:

Answer:

Answer is A. Under any conditions

Explanation:

Just got it correct on A p e x

Answer:

225nm

Explanation:

The Maxima of diffraction girating

dsin( θ)= m(λ)

Where θ)= angle between central axis and corresponding point

The wavelength is to corresponding sin( θ)

Then the maximum number of (λ) can be seen by setting sin( θ)= 1 then

d= m(λ)

At fifth order maximum m=1 then

d= 5(λ)

Where d= distance between the slit and with girating of 1/890rullig/mm

d= 1/890rullig/mm= 8.90×10^-6m

At maximum wavelength

d= 5(λ)

(λ)=5/d

= 8.90×10^-6m/5

=2.75*10^-7

= 275nm

Therefore, longest wavelength that forms an intensity maximum in the fifth order is 275nm

Answer:

27.0 milliliters is the nearest mililiter so 27.0 is the answer

Explanation:

Answer:

Water - Formula: H2O = Hydrogen2 + Oxygen. ...

Hydrogen Peroxide - Formula: H2O2 = Hydrogen2 + Oxygen2 ...

Salt - Formula: NaCl = Sodium + Chlorine. ...

Baking Soda - Formula: NaHCO3 = Sodium + Hydrogen + Carbon + Oxygen3 ...

Octane - Formula: C8H18 = Carbon8 + Hydrogen18

Answer:

0.77 m/s^2

Explanation:

Notice that the weight of the 7 kg mass is calculated via:

weight = m * g = 7 * 9.8 N = 68.6 N

Since the tension in the string is larger (74 N), then the elevator is moving upward and the net force on the object is equal to:

74 N - 68.6 N =  5.4 N

Which tells us that the acceleration of the object is:

F = m * a

5.4 N = 7 kg * a

a = 5.4 /7  m/s^2

a = 0.77 m/s^2

and this must be the same as the acceleration of the elevator since object and elevator are moving together.

Answer:

12s

Explanation:

Given parameters:

Velocity  = 7.5m/s

Distance  = 90m

Unknown:

Time taken  = ?

Solution:

Speed is the rate of distance traveled with time. It is mathematically expressed as;

      Speed  = [tex]\frac{distance}{time}[/tex]

Since the unknown is time;

        Time  = [tex]\frac{distance}{speed}[/tex]  

      Insert the parameters and solve;

  Time  = [tex]\frac{90}{7.5}[/tex]   = 12s

Answer:

ω = 0.36 rev/s = 2.24 rad/s

Explanation:

First, we will find the time taken by the diver to reach the water. For this we use 2nd equation of motion:

h = Vi t + (1/2)gt²

where,

h = height = 9.6 m

Vi = initial vertical velocity = 0 m/s

t = time taken = ?

g = 9.8 m/s²

Therefore,

9.6 m = (0 m/s)(t) + (1/2)(9.8 m/s²)t²

t = √1.95 s²

t = 1.4 s

Now, the average angular speed of diver will be:

ω = No. of Revolutions/t

ω = 0.5 rev/1.4 s

ω = 0.36 rev/s = 2.24 rad/s

Answer:

If I double the current in the inductor, the new total energy will become 4E (option f).

Explanation:

The coil or inductor is a passive component made of an insulated wire that stores energy in the form of a magnetic field due to its form of coiled turns of wire, through a phenomenon called self-induction. In other words, inductors store energy in the form of a magnetic field. The energy stored in the space where there is a magnetic field in the inductor is:

[tex]E=\frac{1}{2} *L*I^{2}[/tex]

where E is Energy [J], L is Inductance [H] and I is Current [A].

If you double the current in the inductor, then the new value of the current is I'= 2*I. So replacing the new total energy is:

[tex]E'=\frac{1}{2} *L*I'^{2}=\frac{1}{2} *L*(2*I)^{2}=\frac{1}{2} *L*4*I^{2}=4*\frac{1}{2} *L*I^{2}[/tex]

Then:

[tex]E'=4*E[/tex]

If I double the current in the inductor, the new total energy will become 4E (option f).

Answer:

I think it’s the 1rst one chemical change

Explanation:

Answer: A) Chemical Change

Explanation: When a firework explodes it realeses all of its chemical energy, thats why, (A)

is the correct answer

Answer:

Sun heating a car sitting in a parking lot

Explanation:

The sun heating a car sitting in a parking lot is an example of electromagnetic waves transferring energy.

Answer:

d

Explanation:

Answer:

57°

Explanation:

Etienne Malus discovered the idea of polarization by reflection. If light is incident on a surface at an angle of 57°, the reflected ray is found to be plane polarized.

Hence, with respect to the normal to the interface, light incident at 57° is completely polarized.

ANSWER

Lift frame :

Initial speed of the coin u=0 m/s

Acceleration a=9.8 m/s

2

Initial height of coin from the floor of elevator h=2.45 m

Time taken by coin to hit the floor T=

g

2H

⟹ T=

9.8

2×2.45

=

2

1

s

velocity of the lift (u₁) = 10 m/s

initial velocity of the coin (u₂) = 10 m/s  

(the coin is also moving with the Elevator)

acceleration of the coin (a₂) = -9.8 m/s²

acceleration of the Elevator (a₁) = 0 m/s

Distance covered by the coin (s)  = -2.5 m

__________________________________________________________

Relative velocity:

We will find the velocity and acceleration of the coin with respect to the lift since we are monitoring the motion of the coin

velocity of the coin with respect to the elevator (u₂₁) = u₂ - u₁

u₂₁ = 10 - 10

u₂₁ = 0m/s

Relative Acceleration:

acceleration of the coin with respect to the elevator (a₂₁) = a₂ - a₁

a₂₁ = -9.8 - 0

a₂₁ = -9.8

__________________________________________________________

From the second equation of motion, we know that:

s=  ut + 1/2at₂

we can rewrite this equation in terms of relative motion:

s = u₂₁(t) + 1/2(a₁₂)t²  

Notice that the time and the displacement are not relative, that's because displacement and time will remain the same no matter the frame of reference

replacing the known values in the equation:

-2.5 = (0)(t) + 1/2 (-9.8)(t²)

-2.5 = -4.9(t²)

dividing both sides by -4.9

t² = -2.5 / -4.9

t² = 25/49

t² = (5)² / (7)²

taking the square root of both the sides

t = 5/7   OR   0.71 seconds (approx)

Therefore, the coin will reach the floor of the Elevator in 0.71 seconds

Explanation:

Q1) What is the speed of the tip of the minute hand of a clock where the hand is of length 7cm?

Ans1) speed, v=st=2πrT=2×227×7×10-260×60=119×10-4=1.22×10-4m/s

Answer:

a. 0.32 b. 1448 m/s

Explanation:

We know v ∝ √T where v = velocity of sound and T = absolute temperature.

Let v₁ = velocity of sound at 17°, v₁ = fλ where f = frequency of sound = 512 Hz and λ = 66.5 cm = 0.665 m

So, v₁ = fλ = 512 Hz × 0.665 m = 340.48 m/s

T₁ = 17 + 273 = 290 K

Let v₂ = velocity of sound in air at NTP = unknown and T₂ = temperature at NTP = 0°C + 273 = 273 K

Now v₁/v₂ = √T₁/√T₂

So, v₂ = (√T₂/√T₁)v₁

= [√(T₂/T₁)]v₁

substituting the values of the variables, we have

v₂ =  [√(273 K/290 K)]340.48 m/s

v₂ =  [√0.9413]340.48 m/s

v₂ = (0.9702)340.48 m/s

v₂ = 330.35 m/s

Also v = √(γP/ρ) where v = velocity of sound in air at NTP  = 330.35 m/s, γ = ratio of molar heat capacities, P = pressure at NTP = 1.013 × 10⁵ Pa and ρ = density of air = 1.293 kg/m³

Since,  v = √(γP/ρ)

making γ subject of the formula, we have

γ = v²ρ/P

substituting the values of the variables, we have

γ = (330.35 m/s)² × 1.293 kg/m³/1.013 × 10⁵ Pa

= 31975.36 kg/m²s² ÷ 1.013 × 10⁵ Pa

= 0.32

b. Speed of sound in mercury v₃ = √(B/ρ) where B = Bulk modulus of mercury = 28.5 × 10⁹ Pa and ρ = density of mercury = 13600 kg/m³

v₃ = √(B/ρ)

= √(28.5 × 10⁹ Pa/13600 kg/m³)

= √(28.5 × 10⁹ Pa/13.6 × 10³ kg/m³)

= √(2.096 × 10⁶) m/s

= 1.448 × 10³ m/s

= 1448 m/s

Answer:

short circuit

Explanation:

A disrupted circuit in which the current bypasses its proper path is a short circuit.

A short circuit is an electrical circuit which allows the electric current to travel along an unintended and uninterrupted path with no or very low electrical impedance in the circuit. This results in an excessive current flow through the electric circuit.

A short circuit is a situation in which there is  faulty connection or damaged wire that causes electric current to travel along the wrong route in the circuit with low or no resistance and damage an electrical device. This may cause serious damage, fire, or even small-scale explosions.

Learn more about Short circuit here:

https://brainly.com/question/30408362

#SPJ6

Answer:

Have a great day!

Explanation:

Barometers. A barometer is a scientific instrument used to measure atmospheric pressure, also called barometric pressure.

Answer:

atmospheric  pressure

Explanation:

Answer:

v = 7.69 x 10³ m/s = 7690 m/s

T = 5500 s = 91.67 min = 1.53 h

Explanation:

In order for the satellite to orbit the earth, the force of gravitation on satellite must be equal to the centripetal force acting on it:

[tex]F_{gravitation}= F_{centripetal}\\\\\frac{GM_{s} M_{E}}{r^2} = \frac{M_{s} v^2}{r}\\\\\frac{GM_{E}}{r} = v^2\\\\v = \sqrt{\frac{GM_{E}}{r} } \\\\[/tex]

where,

G = Universal Gravitational Constant = 6.67 x 10⁻¹¹ N.m²/kg²

Me = Mass of Earth = 5.97 x 10²⁴ kg

r = distance between the center of Earth and Satellite = Radius of Earth + Altitude = 6.371 x 10⁶ m + 0.361 x 10⁶ m = 6.732 x 10⁶ m

v = orbital speed = ?

Therefore,

[tex]v = \sqrt{\frac{(6.67 x 10^{-11}N.m^2/kg^2)(5.97 x 10^{24} kg)}{6.732 x 10^6 m} }\\\\[/tex]

v = 7.69 x 10³ m/s

For time period satellite completes one revolution around the earth. It means that the distance covered by satellite is equal to circumference of circle at the given altitude.

So, its orbital speed can be given as:

[tex]v = \frac{Circumference of Circle at Given Altitude}{T}\\\\v = \frac{2\pi r}{T}\\\\[/tex]

where,

T = Time Period of Satellite = ?

Therefore,

[tex]T = \frac{2\pi r}{v}\\\\T = \frac{(2\pi )(6.732 x 10^6 m}{7.69 x 10^3 m/s}\\\\[/tex]

T = 5500 s = 91.67 min = 1.53 h

Bandura's social learning theory, imitation, and observation are the two main ways that people pick up new skills. Bandura's theory encompasses more than just the notion that interaction with the environment leads directly to learning.

According to Bandura, hostility can also be learned indirectly through observational learning. According to the social learning theory, children learn through imitation.

An individual will internalize and replicate the aggressive behaviors of a role model in the future.

According to Bandura social learning theories, children pick up aggressive behaviors via watching others act aggressively and seeing how these actions are reinforced over time.

Therefore,  it is false  being punished were far more likely to be aggressive than children who did not.

Learn more about Bandura here:

https://brainly.com/question/4122958

#SPJ6

Answer:

3.38m

Explanation:

Given parameters:

Time  = 4s

Acceleration  = 1.3m/s²

Unknown:

Magnitude of the displacement = ?

Solution:

The body starts at rest and the initial velocity is 0m/s. To solve this problem, we have to use the expression below;

    S   = Ut  + [tex]\frac{1}{2}[/tex]at²

 S  = displacement

t is the time

  a is the acceleration

  U is the initial velocity

  V is the final velocity

Insert the parameters and solve;

   S = (0 x 4)  +  [tex]\frac{1}{2}[/tex] x 1.3² x 4  = 3.38m

Answer:

157m/s

Explanation:

We can convert 1.2 x10^5 rev/hr, to rad/secs for unit consistency

w=1.2×10^5rev/hr ×( 2π rad)/rev ×1 min/60sec

w=13083rad/sec

We can express the tangential speed inform of angular speed

Given speed at a point= 12mm12×10^-3m

V=wr

=13083rad/sec×12×10^-3

=157m/s

Hence the tangential speed at a point 12mm from its center is 157m/s

Answer:

-71 V

Explanation:

Given that,

An electron starts from rest at point A and has a speed of 5.0 × 10⁶ m/s at point B.

We need to find the electric potential difference [tex]V_A-V_B[/tex]. It can be calculated by using the conservation of charges as follows :

[tex]qV=\dfrac{1}{2}mv^2[/tex]

m and q are mass and charge on electrons

[tex]V=\dfrac{mv^2}{2(-q)}\\\\V=-\dfrac{9.1\times 10^{-31}\times (5\times 10^6)^2}{2\times 1.6\times 10^{-19}}\\\\V=-71.09\ V[/tex]

So, the electric potential difference is (-71 V). So, the correct option is (a).

Answer: it’s the diagram with a small tree on one side and a larger tree on the other side.

The ray diagram that shows the proper positioning of the image is: the first diagram, where the image is smaller than the object.

A concave mirror also known as converging mirror is a type of curved or spherical mirror in which the outside surface is silvered and the inner surface is made to reflect.

The size and the nature of the image of this kind of mirror is relatively dependent on the position of the object with regards the mirror.

Analysis:

When the object is behind the centre of curvature, the  image is seen to be real, inverted and smaller than the object.

So, the image of the concave mirror increases in size as the object gets closer to the centre of curvature and would be same size as the object at the centre of curvature.

In conclusion, the ray diagram that shows the proper positioning of the image is the first diagram.

Learn more about curved mirrors: brainly.com/question/26257987

#SPJ2

Answer:

c

Explanation:

The lamp lights up using electrical power, and so the light bulb heats up.

Answer:a

Explanation:

i took the test

Answer:

When thinking about the impact force of a falling object, you can calculate the energy of the object at its point of impact if you know the height from which it was dropped.

Explanation:

Answer:

Because it was too hot for volatile compounds (like water) to condense in the inner solar system, rocky planetesimals formed from compounds with high melting points, such as iron and rocky silicates