Answers
Answer:
1) 3 applications of pressure in daily life are :-
● The area of sharp edge of knife, scissor or handsaws are much less then blunt edge. So, for same total force pressure is more for sharp edges than the blunt one. Hence sharp knife, scissors etc, cuts easily than a blunt one.
●Broad handles in bags and suitcases are provided for the comfort. Broad handles have large area. So, the pressure exerted on hands and shoulders would be small while carrying the bags and the suitcases.
●Trucks carrying heavy loads have more than four tyres. More tyres in case of trucks increase the area of contact with the road. This results in reduced pressure on the tyres.
2) Area of the surface which is on ground = 1.5×1
= 1.5m^2
Mass of the block = 300kg
Force applied by the block = Mass × g = 300×10
= 3000N (where g = acceleration due to gravity )
Pressure = Force applied / Area of the surface
= 3000N / 1.5m^2
= 2000 Pa
3)
a) The above experiment signifies that more the area of the surface of an object , less the pressure an object applies.
b) B exerts the minimum pressure because the area of its surface to ground is greater than others & as it has more area of surface , it exerts less pressure. ( area is inversely proportional to pressure )
c) D exerts the maximum pressure because the area of its surface to ground is lesser than others & as it has less area of surface , it exerts more pressure. ( area is inversely proportional to pressure )
d) It depend upon the way an object is kept on ground. If an object is kept in such a way dat the area of the surface to the ground is more , then pressure will be least exerted .If an object is kept in such a way dat the area of the surface to the ground is less, then pressure will be exerted more .
e) Do it yourself . only i will suggest that make the tip of the cone ( which is to the ground ) more narrower.
Explanation:
Related Questions
Use the motion map to answer the question, describe the position and velocity of the object based moo the motion map?
Answers
answer:
When the Moon is a distance of 0.25 D from the Earth, the gravitational force on the Moon from Earth is 16.00 Fm. At what distance with the force on the Moon be 4.00 Fm?
Answers
Answer:
When the gravitational force on the Moon from the Earth = 4.00 Fm, the distance of the Moon from the Earth is 0.5·D
Explanation:
The given information includes;
The distance of the moon from the Earth = 0.25·D
The gravitational force, F, on the Moon from the Earth = 16.00 Fm
When the gravitational force on the Moon from the Earth = 4.00 Fm, the distance of the Moon from the Earth is found as follows;
From Newton's law of gravitation;
[tex]F_{1} = F_{2} =G\dfrac{m_{1}m_{2}}{r^{2}}[/tex]
At r = 0.25·D, F = 16.00 Fm
Therefore;
G×m₁×m₂ = (0.25·D)²×16.00 Fm = D²×Fm = Constant
When, the gravitational force of the Moon from the Earth = 4.00 Fm, we have;
[tex]F = 4.00 \ Fm =\dfrac{D^2 \times Fm}{r_2^{2}}[/tex]
Therefore;
[tex]r_2^{2} =\dfrac{D^2 \times Fm}{4.00 \ Fm} = \dfrac{D^2}{4}[/tex]
[tex]r_2 =\sqrt{\dfrac{D^2}{4}} = \dfrac{D}{2} = 0.5 \cdot D[/tex]
r₂ = 0.5·D
Where;
r₂ = The new distance of the Moon from the Earth
Therefore the distance of the Moon from the Earth when the gravitational force on the Moon from the Earth = 4.00 Fm is r₂ = 0.5·D.
What happens to the charged electroscope when a conductor is moved between its plastic sheets, and why?
Answers
Answer: Please find the answer in the explanation
Explanation:
The question goes thus :
What happens to the charged electroscope when a conductor is moved between its plastic sheets, and why?
When a conductor is moved between its plastic sheets of a charged electroscope, the divergence between the brass plate and the gold leaf will decrease.
And why ?
Because of the unlike charges or neutral uncharged charges between the conductor and the plastic Sheets.
if heat is transferred from gas which could happen
Answers
What is the best use of an atomic model to explain the charge of the particles in Thomason beans
Answers
Mad scientists looked at the growth of claw size in mutant lobsters due to drinking different amounts of seawater contaminated with Pepsi. Independent Variable: Dependent Variable: Controlled Variable:
Answers
Answer:
Dependent Variable: growth of claw size in mutant lobsters
Independent variable: different amounts of seawater contaminated with Pepsi
Controlled variable: Mutant Lobsters
Explanation:
A dependent variable is one that depends on another factor to get it's result.
An independent variable is one that doesn't rely on another factor/variable to derive it's result.
A controlled variable is one which is constant and remains unchanged throughout the course of the experiment/investigation. Which means it verifies the behavior between the dependent and independent variables.
Now, in the question, the growth of claw size in the mutant lobsters depends on the different amounts of seawater contaminated with Pepsi.
Thus growth of claw size in mutant lobsters is a dependent variable while different amounts of seawater contaminated with Pepsi is an independent variable.
The mutant lobsters would be used throughout the investigation to know the relationship between the dependent and independent variable and wouldn't be changed. Thus, they are controlled variable.
1. What is the velocity if the displacement is 50 m and the time interval is 10 s?
Answers
Answer:
Velocity=5m/s
Explanation:
V=?
S=50m
t=10s
V=S/t
V=50/10
V=5m/s
why sound heard better at night than at day?
Answers
Answer:
it is because it is quieter at night than in the daytime. Therefore it is easy to hear the sound far away. However, it is only one of the reasons. Actually, sound transmits farther at night may be related to refraction of sound waves! First, sound is the vibration of air, and it is a kind of wave motion.
Explanation:
A billiard ball moves with 3 kg⋅m/s of momentum and strikes three other billiard balls. What is the total momentum of the balls after the collision?
(1 point)
more than 3 kg⋅m/s
3 kg⋅m/s
It depends on the mass of each ball.
less than 3 kg⋅m/s
Answers
A billiard ball moves with 3 kg⋅m/s of momentum and strikes three other billiard balls that have been just sitting there at rest and not moving.
The total momentum of all four balls after the collision is 3 kg⋅m/s, because momentum is not created or destroyed. The total amount of it after an event is the same as the total amount of it before the event.
The momentum of the billiard balls after the collision is 3 Kgm/s.
Let the billiard ball be B.Given the following data:
Momentum B = 3 Kgm/sTo find the momentum of the balls after the collision:
Momentum is simply a multiplication (product) of the mass of an object with its velocity. Also, momentum is a vector quantity because it has both magnitude and direction.
Mathematically, momentum is given by the formula;
[tex]Momentum = Mass[/tex] × [tex]Velocity[/tex]
[tex]Total \; momentum = Momentum \; B + Momentum \;of \;the \;other\; balls.[/tex]
Since the other billiard balls were at rest (not experience any motion), there velocities would be zero (0) m/s.
Substituting the given values, we have:
[tex]Total \; Momentum = 3 + 0[/tex]
Total momentum = 3 Kgm/s.
Therefore, the momentum of the billiard balls after the collision is 3 Kgm/s.
Find more information: https://brainly.com/question/3556616
True or False: Translations are rigid transformations.
Answers
Answer:
Explanation:
Yes, translations are rigid transformations. You can verify that the distances between the points are preserved.
Answer:
True
Explanation:
In translation, all points of the figure move the same distance and in the same direction. The shape and size of the image remains the same as the preimage
Please Help Me with This
Answers
Answer:
Explanation:
a). Find the graph attached for the motion.
b). If a shopper walk 5.4 m westwards then 7.8 m eastwards,
Distance traveled by the shopper = Distance traveled in eastwards + Distance traveled westwards
= 5.4 + 7.8
= 13.2 m
c). Displacement of the shopper = Distance walked westwards - Distance traveled eastwards
= 5.4 - 7.8
= -2.4 m
Therefore, magnitude of the displacement of the shopper is = 2.4 m
And the direction of the displacement is eastwards.
Which option is part of designing a set of experimental procedures
Answers
determining how data will he gathered
Explanation: Apex
Answer:
determining the hypophysis
Explanation:
here you go
A stone falls freely from rest for 8.0 s.
a. Calculate the stone's velocity after 8.0 s.
b. What is the stone's displacement during
this time?
Answers
a) The acceleration that the stone has is the gravitational acceleration and it is always the same (Actually not but assumed to be so)
The gravitational acceleration is 9.81 m/s²
Since this acceleration is always constant, we can use the formula of V = g × t, where V is velocity, g is the gravitational acceleration and t is time.
Let's use this formula: V = g × t = 9.81 × 8.0 = 78.48 m/s
b) Displacement in free falls is calculated by the formula of d = 1/2 × g × t², which is actually derivated from average velocity.
If we use the formula, d = 1/2 × 9.81 × 8² = is found to be 313.92 m
If there is anything you do not understand or anything is wrong, please let me know and I am sorry for my bad English ^^
Why would you get a more accurate measure of the volume of an irregular solid by using
displacement instead of measuring with a ruler?
Answers
Answer:Displacement method
Explanation:Placing irregular object in a Tube and then measuring the amount of water that either gets displaced from the container or goes up with the creatube and then measuring the amount of water that either gets displaced from the container or goes showing how much volume irregular object is.
In displacement method can be used to accurately measure the volume of oddly shaped objects.
What is the displacement method?The water displacement method can be described as a system of measurements used to find the volume of an object that has an irregular shape. A graduated cylinder will be used to measure the amount of liquid volume an object filled, but it can be done with less scientific techniques.
In order to determine the volume of an irregularly shaped solid, a person can use the water displacement formula. A container of water would require to be measured accurately, and precisely, with a starting volume of water.
Next, the solid will need to be completely submerged underwater, without any part of the object above the water. The water level has risen, and the final volume of the water requires to be recorded. The starting volume of the container requires to be subtracted from the final volume to get the volume of only the object.
Learn more about the displacement method, here:
https://brainly.com/question/11182072
#SPJ2
Which are characteristics of refraction
Answers
Answer:
When light travels from one medium to another, the frequency of light does not change. However, the velocity and wavelength change.
Explanation:
Pls mark me as brainliest
Suppose s(t) is the position of an object moving along a line at time t0. What is the average velocity between the times ta and tb?
Answers
Answer:
[tex]V = \frac{s(t_b) - s(t_a)}{t_b -t_a}[/tex]
Explanation:
Given;
position of the object as s(t)
The average velocity is given by;
[tex]V = \frac{s(t_b) - s(t_a)}{t_b -t_a}[/tex]
where;
s(tb) is the object's final position at time tb
s(ta) is the initial position of the object at time ta
tb is the final time of the object's displacement
ta is the initial time of the object's displacement
what is meant by pressure?write its unit.
Answers
Answer:
Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed
Unit: Pascal (Pa)
1Pa = 1N/m^2
what acceleration of a 45 kg mass pushed with 15 N of force?
Answers
Explanation:
Fnet = ma.
Assume that there is no resistance acting on the mass. Therefore a = 15N / 45kg = 0.33N/kg or 0.33m/s^2.
In physics lab, you measure three quantities: , , and . Suppose that =1.5 kg , =0.4 m , and =3.9 kg/m . Which of the mathematical combinations might be meaningful?
Answers
Answer:
1.5 kg is mass, .4 m is volume, and 3.9 kg/m is volume
Explanation:
When looking at these types of problems, consider each part. First, whenever problems have measurements that have similar units of measurement, check if they are density related. In this case, we use the formula of D=M/V, where D stands for density, M stands for mass, and V stands for volume. Any measurements that relate to grams or pounds are mass. In solids, volume is written in cm or m, while in liquid, volume is considered in liters and gallons. Density is always mass divided by volume, so we know that 3.9 kg/m is the density due to the units provided.
6
Question 2 (1 poin)
A rocket traveling at 39.09 m/s is accelerated uniformly to 99.03 m/s over a 22.82 s
interval. What is its displacement during this time
Answers
Answer: a
Explanation:
What is an example of a concentric contraction
Answers
Answer:
an example is a bicep curl
Explanation:
A concentric contraction is a type of muscle activation that causes tension on your muscle as it shortens. As your muscle shortens, it generates enough force to move an object.
Write a explanation explaining why red is a beautiful color is not a hypothesis
Answers
Answer:
Please find the explanation below
Explanation:
A hypothesis in science is a testable explanation that is yet to be tested via experimentation. It is a predictive statement or suggested solution to an observation. A hypothesis aims at finding a possible explanation/answer to a question, which is subject to testing. One important aspect of formulating a hypothesis is that it tends to connect the independent variable with the dependent/measurable variable.
The statement "RED IS A BEAUTIFUL COLOR" cannot be considered a hypothesis because it does not aim to answer a question that can undergo experimental testing. This statement can not be measured via experimentation. The statement is not a possible answer to a question but rather a personal opinion about something.
Why do prokaryotic cells usually reproduce more quickly than eukaryotic cells?
Choose 1 answer:
(Choice A) A Eukaryotic cells are more structurally complex than prokaryotic cells.
(Choice B) B Eukaryotic cells have less DNA than prokaryotic cells.
(Choice C) C Eukaryotic cells have more cell walls than prokaryotic cells.
(Choice D) D Eukaryotic cells are smaller than prokaryotic cells.
Answers
Prokaryotic cells reproduce more quickly than eukaryotic cells because the latter are more structurally complex. The correct option is A.
Structural complexity of cellsEukaryotic cells have nuclei and membrane-bound organelles such as mitochondrion. This is unlike prokaryotic cells whose DNA lies freely in the cytoplasm and lacks membrane-bound organelles.
In order words, eukaryotic cells are structurally more complex than prokaryotic cells. Thus, reproductive times in prokaryotes are usually quicker than in eukaryotes.
More on the structural complexity of cells can be found here: https://brainly.com/question/3502696
#SPJ1
two teams are playing tug of war. Team A pulls to the right with a force of 450 N. Team B pulls to the left with a force of 415 N
Answers
Answer:
team A - team B = 450 N - 415 N
= 35 N
Explanation:
net force on the rope is 35 N and the direction is towards A.since the two teams are pulling away from each other with the given forces, the net force can be calculated by subtracting the forces.
The net force on the rope is 35N in right direction
What is Net Force? The net force is the vector sum of forces acting on an object,How to calculate the Net force?The force applied by Team A is 450N to the right (Given)The force applied by Team B is 415 N to the left (Given)We need to find the Net force applied on the rope and the directionAs We know that ,
[tex]F_{net} = F_1+F_2[/tex]
Now as The direction of the Team A is right so the Force applied will be positive, that is 450N
Simultaneously , The direction of Team B is left so the Force applied will be negative , that is -415N
Here,
F1 = 450N
F2 = -415N
[tex]F_{net} = F_1+F_2[/tex]
= 450+ (-415N)
= 450-415
=35N
Hence the net force applied is 35N and as the net force is positive the direction will be right
Learn more about Net force here
https://brainly.com/question/11556949
#SPJ2
What is the number at the end of an isotope’s name?
Answers
Explanation:
The liquid contains only one element. -The liquid is a pure substance. The number at the end of an isotope's name is the -mass number. While looking at xenon (Xe) on the periodic table, a student needs to find an element with a smaller atomic mass in the same group.
Which of the following hypotheses is written correctly?*
1.If I heat up a tennis ball it will bounce high.
2.Frozen tennis balls will not bounce as high because they are more dense.
3.If a tennis ball is frozen, it won't bounce as high as one that is not frozen.
4.If I freeze a tennis ball, then it will not bounce as high because the ball is more dense.
Answers
Answer:
4 Because Hypothesis sentence always have to be "If" and Then a "then"
Mia is driving at 15m/s. she accelerates for 6sec and reaches 25m/s what is her acceleration
Answers
Answer:
1.67m/s²Explanation:
acceleration is the change i velocity with respect to time.
Acceleration = change in velocity/time take
Acceleration = final velocity - initial velocity/time taken
Given initial velocity = 15m/s
final velocity = 25m/s
time = 6sec
Substituting the given value into the formula above to get acceleration
acceleration = 25-15/6
acceleration = 10/6
acceleration = 1.67m/s²
Hence Mia acceleration is 1.67m/s²
Round each of the following to 3 significant figures.
a) 77.0653 g
c) 0.00023350 m
b) 6,310,028.2 mm
d) 10.2030°C
Answers
Answer:
a. 77.1 g
b.0.000234 m
c. 6310000 mm
d. 10.2°C
Explanation:
any push or pull on an object is called (n)
Answers
Answer: Any push/pull on any object is made by a force of some sort.
Explanation:
katie measured the distance her friend morgan ran on a straight track every 2s. her measurements are recorded in the table below. what was morgan’s average speed? what was her acceleration for the entire trip?
Answers
Answer:
The average speed of her is 2 m/s.
The acceleration for the entire trip is 0.2 m/s²
Explanation:
Given that,
katie measured the distance her friend morgan ran on a straight track every 2s.
According to given chart,
We need to calculate the average speed
Using formula of average speed
[tex]v_{avg}=\dfrac{D}{T}[/tex]
Where, D = total distance
T = total time
Put the value into the formula
[tex]v_{avg}=\dfrac{20}{10}[/tex]
[tex]v_{avg}=2\ m/s[/tex]
We need to calculate the acceleration for the entire trip
Using equation of motion
[tex]v=u+at[/tex]
[tex]2=0+a\times10[/tex]
[tex]a=\dfrac{2}{10}[/tex]
[tex]a=0.2\ m/s^2[/tex]
Hence, The average speed of her is 2 m/s.
The acceleration for the entire trip is 0.2 m/s²