Answers
Related Questions
Calculate the pH of a 0.010 M NaNO2 solution.
Answers
Answer:
Calculate the pH of 0.010 M HNO2 solution. The K, for HNO2 is 4.6 x 104
Answer: pH = 2.72
A sheet of muscles called the diaphragm seals the bottom of this cavity true or false?
The blood transports the oxygen to every cell in the body true or false?
The cells need carbon dioxide to release energy true or false?
Carbon Dioxide is a waste product of respiration true or false?
Water is needed in the cells for respiration to occur true or false?
Glucose is made during the respiration true or false?
Respiration does not happen in the cells when we sleep true or false?
Air enters the body through the nose and mouth, and passes into the wind pipe of the trachea true or false?
Answers
Answer:
1. False. White blood cells do.
2. False. Every seven years your cells are in the process of dying and being replaced. Although some cells don't die but your cells don't last for more than a period of 7 years.
3. True.
4. True.
5. False. Explained in 2.
Explanation:
Ozone is three oxygen atoms bonded together. It can sometimes be smelled in the air after a thunderstorm. the smell is a result of
Answers
Ozone gas can be smelled in the air after a thunderstorm as a result of reactions between oxides of nitrogen and volatile organic compounds.
How ozone gas be smelled?Ozone gas can be produced due to chemical reactions between oxides of nitrogen and volatile organic compounds. This reaction occurs when pollututed gas is emitted from vehicles react and other activities with each other in the presence of sunlight.
So we can canclude that Ozone gas can be smelled in the air after a thunderstorm as a result of reactions between oxides of nitrogen and volatile organic co
Learn more about ozone here: https://brainly.com/question/520639
What happened during the fusion reaction shown? 2H Зн 4He neutron O A. Two H nuclei fused into one He nucleus. O B. One He nucleus split into two H nuclei. O C. The nuclei that fused lost all their neutrons. D. The nuclei that fused lost some of their protons.
Answers
Answer: C.
Explanation:
two H nuclei fused into one He nucleus
Answer: A!
Explanation: just did it
The reaction for the formation of ammonia is given a
N2(g) + 3H2(g) = 21H3(g)
write the vate reaction for :
a) the formation of NH₃.
6) the disappearance of N and H₂
Answers
Answer:
a.
[tex]rate_{NH_3}=\frac{2d[NH_3]}{dt}[/tex]
b.
[tex]rate_{N_2}=\frac{-1d[N_2]}{dt} \\\\rate_{H_2}=\frac{-3d[H_2]}{dt}[/tex]
Explanation:
Hello there!
In this case, according to the law of rate proportions, it is possible to write the the rates of reaction for the formation of NH3 and the disappearance of the N2 and H2, by considering that the coefficient in the reaction for NH3 is +2 and those of N2 and H2, -1 and -3 respectively. Moreover, we set up these equations as derivatives as shown below:
a.
[tex]rate_{NH_3}=\frac{2d[NH_3]}{dt}[/tex]
b.
[tex]rate_{N_2}=\frac{-1d[N_2]}{dt} \\\\rate_{H_2}=\frac{-3d[H_2]}{dt}[/tex]
Best regards!
Ive finished my class good luck!!? ❤️✌️
Answers
Answer:
yayyy! proud of u
Explanation:
Consider the reaction of ruthenium(III) iodide with carbon dioxide and silver. RuI3 (s) 5CO (g) 3Ag (s) Ru(CO)5 (s) 3AgI (s) Determine the limiting reactant in a mixture containing 169 g of RuI3, 58.0 g of CO, and 96.2 g of Ag. Calculate the maximum mass (in grams) of ruthenium pentacarbonyl, Ru(CO)5, that can be produced in the reaction. The limiting reactant is:
Answers
Answer:
71.6 g of Ru(CO)₅ is the maximum mass that can be formed.
The limiting reactant is Ag
Explanation:
The reaction is:
RuI₃ (s) + 5CO (g) + 3Ag (s) → Ru(CO)₅ (s) + 3AgI (s)
Firstly we determine the moles of each reactant:
169 g . 1mol /481.77g = 0.351 moles of RuI₃
58g . 1mol /28g = 2.07 moles of CO
96.2g . 1mol/ 107.87g = 0.892 moles
Certainly, the excess reactant is CO, therefore, the limiting would be Ag or RuI₃.
3 moles of Ag react to 1 mol of RuI₃
Then 0.892 moles of Ag may react to (0.892 . 1) /3 = 0.297 moles
We have 0.351 moles of iodide and we need 0.297 moles, so this is an excess. In conclussion, Silver (Ag) is the limiting.
1 mol of RuI₃ react to 3 moles of Ag
Then, 0.351 moles of RuI₃ may react to (0.351 . 3) /1 = 1.053 moles
It's ok, because we do not have enough Ag. We only have 0.892 moles and we need 1.053.
5 moles of CO react to 3 moles of Ag
Then, 2.07 moles of CO may react to (2.07 . 3) /5 = 1.242 moles of Ag.
This calculate confirms the theory.
Now, we determine the maximum mass of Ru(CO)₅
3 moles of of Ag can produce 1 mol of Ru(CO)₅
Then 0.892 moles may produce (0.892 . 1) /3 = 0.297 moles
We convert moles to mass → 0.297 mol . 241.07g /mol = 71.6 g
bond. Water is a polar solvent. The oxygen atom, being more electronegative, attracts the electron cloud toward itself. As the electron cloud is pulled by the oxygen atom, it carries a partial negative charge, and the hydrogen atoms carry a partial positive charge. This partial separation of charges in the water molecule makes it polar. Which intermolecular forces contribute to the dissolution of NaCl in water
Answers
Answer:
NaCl and water: Ion - Dipolo forces
NaCl and Hexane: Ion-ion force between Na+ and Cl− ions and London dispersion force between two hexane molecules
Explanation:
NaCl and water:
The ion-dipole force is established between an ion and a polar molecule. Polar molecules are dipoles, they have a positive end and a negative end.
H2O has an important charge separation in its atoms (the H has a positive partial charge and the O has a negative partial charge) and this causes permanent electrical dipoles in the water molecules.
Sodium chloride is an ionic compound formed of positive and negative charge ions, Na + and Cl-. Depending on their charge, these ions will be attracted to opposite charges in the water molecules (H attracts chloride ions and O attracts sodium ions), causing the salt to dissolve in water.
Explanation:
Lead (ll) iodide (PbI2) has a solubility of 1.52×10 to the -3 mol/L.
1. write the dissolution reaction to PbI2 including all states.
2. Write the expression for Ksp for Pbl2.
3. What is the concentration of Pb2+ in the equilibrium solution?
4. What is the concentration of I- in the equilibrium solution?
5. Calculate the solubility product of Pbl2.
Answers
Answer:
A. PbI2(s) ===> Pb2+(aq) + 2I-(aq)
B. Ksp = [Pb2+][I-]^2
C. 1.52 x 10^-3 M. It is equal to the moles/L of PbI2 that go into solution.
D. 2 x 1.52 x 10^-3 = 3.04 x 10^-3 M
E. Ksp = (1.52x10^-3)(2.31x10^-6) = 3.51 x 10^-9
Explanation:
In the given question, [tex]\rm PbI_2(s) \rightleftharpoons Pb^{2+}(aq) + 2I^-(aq)[/tex] is the dissolution reaction of [tex]\rm PbI_2[/tex] in water, [tex]\rm Ksp = [Pb^{2+}][I^-]^2[/tex] is expression for Ksp for [tex]\rm PbI_2[/tex], [tex]1.52\times 10^{-3 }[/tex] mol/L is the concentration of [tex]\rm Pb^{2+ }[/tex] in the equilibrium solution, [tex]3.04\times 10^{-3}[/tex] mol/L is the concentration of I- in the equilibrium solution and
[tex]1.40\times 10^{-8}[/tex] is the solubility product of [tex]\rm PbI_2[/tex], respectively.
A reaction is a process that involves the transformation of one or more substances into one or more different substances.
1. The dissolution reaction of [tex]\rm PbI_2[/tex] in water is:
[tex]\rm PbI_2(s) \rightleftharpoons Pb^{2+}(aq) + 2I^-(aq)[/tex]
2. The expression for Ksp for [tex]\rm PbI_2[/tex] is:
[tex]\rm Ksp = [Pb^{2+}][I^-]^2[/tex]
Where, [tex]\rm [Pb^{2+}][/tex] is the concentration of [tex]\rm Pb^{2+ }[/tex] ions in solution and [tex]\rm [I^-][/tex] is the concentration of [tex]\rm I^-[/tex] ions in solution.
3. The solubility of [tex]\rm PbI_2[/tex] is [tex]1.52\times 10^{-3 }[/tex] mol/L. Since [tex]\rm PbI_2[/tex] dissociates into one [tex]\rm Pb^{2+ }[/tex] ion and two [tex]\rm I^-[/tex] ions, the concentration of [tex]\rm Pb^{2+ }[/tex] in solution is equal to the solubility of [tex]\rm PbI_2[/tex], which is [tex]1.52\times 10^{-3 }[/tex] mol/L.
[tex]\rm [Pb^{2+}] = 1.52\times 10^{-3}\ mol/L[/tex]
4. Since [tex]\rm PbI_2[/tex] dissociates into one [tex]\rm Pb^{2+ }[/tex] ion and two [tex]\rm I^-[/tex] ions, the concentration of [tex]\rm I^-[/tex] ions in solution is twice the solubility of [tex]\rm PbI_2[/tex] .
[tex]\rm [I^-] = 2 \times 1.52\times 10^{-3 }\ mol/L[/tex]
= [tex]3.04\times 10^{-3}[/tex] mol/L
5. The solubility product of [tex]\rm PbI_2[/tex] can be calculated using the expression for Ksp and the concentrations of [tex]\rm Pb^{2+ }[/tex] and [tex]\rm I^-[/tex] ions in solution.
[tex]\rm Ksp = [Pb^{2+}][I^-]^2[/tex]
= [tex]1.52\times 10^{-3 }[/tex] [tex]\times[/tex] [tex]\rm (3.04\times 10^{-3} mol/L)^2[/tex]
= [tex]1.40\times 10^{-8}[/tex]
Therefore, the dissolution reaction of [tex]\rm PbI_2[/tex] in water, expression for Ksp for [tex]\rm PbI_2[/tex], the concentration of Pb2+ in the equilibrium solution, the concentration of I- in the equilibrium solution and solubility product of [tex]\rm PbI_2[/tex] is mentioned above.
Learn more about reaction here:
https://brainly.com/question/16737295
#SPJ4
A low pitch sound is associated with which of the following?
а. high frequency
b. low frequency
с. fundamental tone
d. low intensity
No links plz
Answers
The correct name for HIO2?
Answers
Answer:
iodous acid
Explanation:
iodous acid would also be known as HIO2
10 points pls help!!
Answers
Answer:
Question 16: I'm not sure but most likely #3
Question 17: #4
Explanation: Hope this Helps
Answer:
A for first one and second one is A
find the concentration in mol/dm^3 of a solution of sodium hydroxide if it contains 3.5g of NaOH in 100cm^3 of solution.
Answers
Answer:
0.875
...............
The oxidation state/number for X in XO3- is:
Answers
Answer:
We can Observe that the Compound does not have the Positive or the negative Charge thus it is Neutral. Hence, the Oxidation Number of the Compound Will be 0. Thus, the Highest Oxidation Number of the X is 6.
The oxidation state/number for X in XO3 is determined as +6.
Oxidation state of X in XO3
The oxidation state/number for X in XO3 is determined from the overal charge of the compound and the charge of oxygen atom.
Overall charge of the compound = 0Oxidation state of oxygen (O) is -2The oxidation state of "X" is calculated as;
X + (3 x -2) = 0
X - 6 = 0
X = +6
Thus, the oxidation state/number for X in XO3 is determined as +6.
Learn more about oxidation state here: https://brainly.com/question/14426389
#SPJ2
Using the balanced equation N2+O2=2NO, how many grams of NO can be produced when 25.0 grams of N react?
Answers
Answer:
[tex]53.55gNO[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction, it is possible for us to calculate the produced grams of nitrogen monoxide by starting with 25.0 g of nitrogen via their 1:2 mole ratio and the molar masses of 30.1 g/mol and 28.02 g/mol, respectively and by some stoichiometry:
[tex]=25.0gN_2*\frac{1molN_2}{28.02gN_2}*\frac{2molNO}{1molN_2}*\frac{30.01 gNO}{1molNO}\\\\=53.55gNO[/tex]
Best regards!
Which of the following compounds is least soluble in water?
A) iron (III) chloride
B) ammonium acetate
C) sodium hydroxide
D) magnesium carbonate
Answers
Answer:
B
Explanation:
Two students prepared aqueous solutions of LiCl and measured the properties, as shown in the table above. Both students observed that the solid LiCl readily dissolved in H2O. The students drew particle diagrams to explain the changes in the enthalpy and entropy of dissolution for LiCl based on their results and observations. Based on this information, the better particle diagram was drawn by which student, and why is that diagram more accurate?
A) The better particle diagram was drawn by Student 1 because when LiCl dissolves in water, it dissociates into Li+ and Cl− ions causing an increase in entropy.
B) The better particle diagram was drawn by Student 1 because when LiCl dissolves in water, it dissociates into Li+ and Cl− ions indicating that the dissolution of LiCl is exothermic.
C) The better particle diagram was drawn by Student 2 because it shows that LiCl does not dissociate, resulting in a decrease in entropy for the dissolution of LiCl.
D) The better particle diagram was drawn by Student 2 because it shows that LiCl does not dissociate, resulting in an endothermic process for the dissolution of LiCl.
Answers
Answer:
Solubility
Explanation:
Solid LiCl dissolves in water because:
A. The Li+ ions are attracted to the oxygen atom (partially -ve charge) of water.
D. The Cl– ions are attracted to the hydrogen atom (partially +ve charge) of water.
The better particle diagram was drawn by Student 1 because when LiCl dissolves in water, it dissociates into Li+ and Cl− ions causing an increase in entropy. The correct option is option A.
What is solubility?The maximum amount of a material that may dissolve in another is known as its solubility. A saturated solution is created when a solvent can dissolve its maximum quantity of solute before reaching equilibrium.
A supersaturated solution results when extra solutes are dissolved past the equilibrium solubility limit under specific circumstances. More solute cannot raise the concentration in the solution past saturation or supersaturation. Instead, the extra solute begins to separate from the solution as a precipitate. The better particle diagram was drawn by Student 1 because when LiCl dissolves in water, it dissociates into Li+ and Cl− ions causing an increase in entropy.
Therefore, the correct option is option A.
To learn more about solubility, here:
https://brainly.com/question/14366471
#SPJ6
A 10.0 mL sample of H2SO4 was exactly neutralized by 23.5 mL of 1.00 M KOH. Calculate the molarity of the acid. H2SO4(aq) + KOH(aq) —> K2SO4(aq) + H2O(l)
Answers
Answer:
1.175 M
Explanation:
The balanced reaction is:
H₂SO₄(aq) + 2KOH(aq) —> K₂SO₄(aq) + 2H₂O(l)First we calculate how many moles of KOH reacted, using the given concentration and volume:
1.00 M * 23.5 mL = 23.5 mmol KOHThen we convert moles of KOH to moles of H₂SO₄, using the stoichiometric coefficients of the balanced reaction:
23.5 mmol KOH * [tex]\frac{1molH_2SO_4}{2molKOH}[/tex] = 11.75 mmol H₂SO₄Finally we calculate the molarity of the acid:
11.75 mmol H₂SO₄ / 10.0 mL = 1.175 MD
Question 2
What is the purpose of looking at chemical reactions?
to classify the type of reaction it is
to identify the type of reaction it is
to see how elements rearrange and represent something else
all of the above
Answers
Answer:
all of the above
Explanation
1.Why do you think the agricultural revolution led to more population growth?
Answers
Answer:
The agricultural revolution increased agricultural production and technological advancements. I think this led to population growth because the increase in labor and the increase in technologies increased human deveolpment. The revolution also allowed farmers to grow and produce more food and transport it to where it was needed.
Explanation:
When you're just chilling in the pool and then you think about this:
Answers
Explanation:
Sonic is my bf forever, back off
Answer:
oof I always lose on video games so I just quit
Plz help me I am timed!!
Answers
Answer:
What do you need help with
Explanation:
Explanation:
okay I'll help but whats the question
Acidic solutions have pH value less than 7 . Select one : O True O False
Answers
Answer:
Explanation:
The answer is true.
Answer:
true
Explanation:
acids have ph which is less than 7 and base have ph greater than 7
Which expression represents the concentration of OH– in solution?
a. 10–14 / [H3O+]
b. [OH–] / 10–14
c. 10–14 – [H3O+]
d. 10–14 x [H3O+]
Answers
Answer:
c. 10–14[H3O+]
Explanation:
On a calculator, calculate 10-8.34, or "inverse" log ( - 8.34). Example: What is the pOH of a solution that has a hydroxide ion concentration of 4.82 x 10-5 M? The hydroxide ion concentration can be found from the pOH by the reverse mathematical operation employed to find the pOH.
Explanation:
Hydronium (H3O+) and hydroxide ions (OH-) are both present in pure water and in all aqueous solutions.
Their respective concentrations in water are 10^-7 M each and are inversely proportional to each other as given by the ion product of water, Kw.
Kw = [H3O+][OH−]
Where Kw = 1.0 * 10^-14,
[H3O+] = concentration of hydronium ions
[OH-] = concentration of hydroxide ions
Therefore, [OH-] = Kw / [H3O+]
[OH-] = 10^-14/[H3O+]
How many grams (g) are in 4.00 moles of Carbon Dioxide (CO2) ?
Answers
Answer:
m = 176.04 g .
Explanation:
Hello there!
In this case, according to the mole-mass relationships, which are based off the mass of one mole of any compound via the molar mass, it is possible to realize that the molar mass of carbon dioxide is 44.01 (12.01+16*2) g/mol, and therefore, the mass in grams of 4.00 moles of this compound are calculated as shown below:
[tex]m=4.00molCO_2*\frac{44.01gCO_2}{1molCO_2}\\\\m=176.04g[/tex]
Best regards!
This subject is science.
All the members of one community living in a particular area make up a population. True or False.
Please help please please please.
Answers
Answer:
false
Explanation:
All the members of one species in a particular area are referred to as a population. All the different populations that live together in an area make up a community. The community of organisms that live in a particular area, along with their nonliving surroundings, make up an ecosystem.
Which element does this Bohr model represent? (look at a periodic table if needed)
Answers
what is a heterogeneous mixture?
Answers
Answer:
A heterogeneous mixture is a mixture in which the composition is not uniform throughout the mixture
A student uses 200 grams of water at a temperature of 60 °C to prepare a saturated solution of potassium chloride , KCI. Identify the solute in this solution.
1. H2O(l)
2. KCl (aq)
3.K + (aq)
4.KCl(s)
Answers
Answer:
4. KCl(s)
Explanation:
KCl is an ionic salt that dissolves in water to form a KCl aqueous solution.
A solution is defined as the homogeneous mixture of one or more solutes dissolved in a solvent. Here in the saturated solution of potassium chloride, the solute is KCl. The correct option is 4.
What is a solute?A solute is defined as the substance which is dissolved in a solution. In a solution the amount of the solute present is always smaller than the amount of the solvent. For example in a salt solution, salt dissolves in water and therefore salt is the solute.
The particles of the solute present in a solution cannot be seen by our eye. The solute from a solution is not possible to separate by filtration. In an unsaturated solution, the concentration of the solute is much lower than that of the concentration of the solvent.
A solution is a combination of the solute and the solvent.
Thus the correct option is 4 - KCl.
To know more about solute, visit;
https://brainly.com/question/13812915
#SPJ2
A chemical change creates a new
A-atom
B-element
C-substance
Answers
Answer:
c substance
Explanation:
Matter is never destroyed or created in chemical reactions. The particles of one substance are rearranged to form a new substance. The same number of particles that exist before the reaction exist after the reaction.
If there is a change in something that is already a substance, it becomes a new substance