a. For Victory Vehicles the economic order quantity is 400.
b. The total annual cost of ordering inventory is $1400.
c. Assuming that the company operates 250 days each year and the lead time for orders is 12 days, the reorder point is 243.
d. The number of orders Victory Vehicles will need to place each year is 13.
e. Using the economic order quantity, days which will pass between each order is 20.
a. The economic order quantity (EOQ) can be calculated using the formula:
EOQ = √((2DS)/H)
Where, D = Annual demand, S = Ordering cost, H = Annual storage cost per unit
Using the above formula,
EOQ = √((2 * 5000 * 80)/2)
EOQ = 400
Therefore, the economic order quantity is 400.
b. The total annual cost of ordering inventory can be calculated using the formula:
Total cost = (D/Q)S + (Q/2)H
Where, Q = EOQ, S = Ordering cost per order, H = Annual holding cost per unit, D = Annual demand
The annual demand is 5000 units, the ordering cost is $80, the annual storage cost per unit is $2 and the EOQ is 400.
Using the above formula,
Total cost = (5000/400)*80 + (400/2)*2
Total cost = 1000 + 400
Total cost = $1400
Therefore, the total annual cost of ordering inventory is $1400.
c. The reorder point can be calculated using the formula:
Reorder point = Lead time demand + Safety stock
Where, Lead time demand = Lead time * Daily demand
Safety stock = Z * √(Lead time * Variance of daily demand) / Unit
In this case, the lead time is 12 days, the daily demand is 20 units and the safety stock is 1.96. The variance of daily demand is 0.2 (Assuming that the standard deviation of demand is 2 units).
Using the above formula,
Reorder point = (12 * 20) + (1.96 * √(12 * 0.2))/1
Reorder point = 240 + 1.96 * 1.549
Reorder point = 240 + 3.034
Reorder point = 243
Therefore, the reorder point is 243.
d. The number of orders Victory needs to place each year can be calculated using the formula:
Number of orders = (Annual demand) / Q
Where, Annual demand is 5000 units and the EOQ is 400. Using the above formula,
Number of orders = 5000 / 400
Number of orders = 12.5
Therefore, the number of orders Victory needs to place each year is 12.5 (Approximately 13 orders).
e. The number of days between each order can be calculated using the formula:
Number of days = EOQ / Daily demand
Where, EOQ is 400 and the daily demand is 20 units.
Using the above formula,
Number of days = 400 / 20
Number of days = 20
Therefore, the number of days between each order is 20.
Learn more about Economic order quantity:
https://brainly.com/question/26814787
#SPJ11
Suppose that we include government spending in the model. Total govern- ment spending is given by G₁ = N₁T where 7 is a lump sum tax collected from all young agents. This means that per capita government spending, gt = is constant and given by T. The utility maximization problem is max U₁ = ln Cy.t + Bln Co,t+1 Cy.t.Co,t+1-St s.t. Cy,t + St = W₁ - T Co,t+1 = St Rt+1. Solve for the optimal st as a function of factor prices, 7, and other parameters.
The optimal set as a function of factor prices, 7, and other parameters is given as follows; Taking the first-order condition of the Lagrangian:Ln Cy, [tex]t - Lt + λt = 0Ln Co[/tex], [tex]t+1 + βλt+1 = 0[/tex], [tex]Lt - Ct - gt = 0[/tex].
Since the lump-sum tax is given by T = g₁/N₁, where N₁ is the number of young people, the per capita government spending is given by g_t = T. Thus, gt is a constant. Therefore, [tex]Lt = Ct + gt[/tex].
Substituting the Lagrange multiplier from the goods market clearing condition into the agent’s budget constraint yields; Ct + St = W₁ - T. Since the intertemporal budget constraint holds with equality, Co,[tex]t+1 = St (Rt+1)[/tex]. From the first-order condition of the Lagrangian, Lt - Ct - gt = 0, we know that Ct + St = W₁ - T.Thus, Lt = W₁ - T - Co,t+1Rt+1.
Substituting for Lt and Co,t+1 in the first budget constraint above, we get;[tex]Ct = (W₁ - T - Co,t+1Rt+1 - gt)/(1+β)[/tex]. Therefore;[tex]St = (1/ R_t+1)(W₁ - T - Co,t+1R_t+1 - g_t)/(1+β)[/tex].
Substituting Co,t+1 = StRt+1 and simplifying, we obtain;[tex]St = (1/(1+β+R_t+1))(W₁ - T)/(1+R_t+1) - (1/(1+β+R_t+1))(g_t/(1+R_t+1))[/tex]The optimal value of it is obtained by substituting in the values of Rt+1 and other parameters and solving for St.
To learn more about budget constraint, visit here
https://brainly.com/question/31456640
#SPJ11
Amy Lloyd is interested in leasing a new car and has contacted three automobile dealers for pricing information. Each dealer offered Amy a closed-end 36 month lease with no down payment due at the time of signing. Each lease includes a monthly charge and a mileage allowance. Additional miles receive a surcharge on a per-mile basis. The monthly lease cost, the mileage allowance, and the cost for additional miles follow: Dealer Monthly Cost Mileage Cost per Allowance Additional Mile $289 35,000 $0.15 Dealer Dealer B Dealer $300 45.000 $0.20 5315 54,000 $0.15 Amy decided to choose the lease option that will minimize her total 36- month cost. The difficulty is that Amy is not sure how many miles she will drive over the next three years. For purposes of this decision she believes it is reasonable to assume that she will drive 12,000 miles per year, 15,000 miles per year, or 18,000 miles per year. With this assumption Amy estimated her total costs for the three lease options. For example, she figures that the Dealer Alease will cost her 36($289) + $0.15(36,000 - 36,000) - $10,404 if she drives 12,000 miles per year 36(5289) - $0.15[45,000 - 36,000) - $11.754 if she drives 15,000 miles per year, or 36($289) + $0.15(54,000 - 36,000) - $13,104 if she drives 18,000 miles per year. (a) What is the decision, and what is the chance event? The decision is to choose the best lose option alternatives. The chance event is the number of mes driven There are possible outcomes (b) Construct a payoff table. Enter your answers in $). Annual Miles Driven Dealer 12,000 15,000 Dealer A $10,404 $11,754 18,000 $13,104 Dealer B 10800 10000 12600 Dealerc $ 11340 11340 11340 (c) IF Amy has no idea which of the three mileage assumptions is most appropriate, what is the recommended decision (leasing option) using the optimistic, conservative, and minimax regret approaches? The recommended decision using the optimistic approach is Dealer The recommended decision using the conservative approach is Dealer Aura |x The recommended decision using the minimax regret approach is Dear G (d) Suppose that the probabilities that Amy drives 12,000, 15,000, and 18,000 miles per year are 0.5, 0.4 and 0.1, respectively. What option should Amy choose using the expected value approach? EVIDealer A) - 11214 EV(Dealer B) - $ 10980 EVIDealer C) - $ 11340 The best decision is Dealer B (e) Develop a risk profile for the decision selected in part (d). What is the most likely cost, and what is its probability? Based on the risk profile, the most likely cost is s at a probability of (6) Suppose that after further consideration Army concludes that the probabilities that she will drive 12,000, 15,000, and 18,000 miles per year are 0.3, 0.4, and 0.3, respectively. What decision should Amy make using the expected value approach? EV Dealer A) - 5 EV(Dealer B) - 5 EVIDealer C) = $ The best decision is S
a) The decision is to choose the lease option that will minimize Amy's total 36-month cost. The chance event is the number of miles driven. c) Using the minimax regret approach, Amy would choose Dealer C, as it has the lowest regret for any given outcome. f) The best decision is to choose Dealer A as it has the highest expected value.
Answers to the questions(a) The decision is to choose the lease option that will minimize Amy's total 36-month cost. The chance event is the number of miles driven.
(b) Payoff table:
Annual Miles Driven Dealer A Dealer B Dealer C
12,000 $10,404 $10,800 $11,340
15,000 $11,754 $10,000 $11,340
18,000 $13,104 $12,600 $11,340
(c) Using the optimistic approach, Amy would choose Dealer A, as it has the highest payoff under the most favorable mileage assumption.
Using the conservative approach, Amy would choose Dealer B, as it has the highest payoff under the least favorable mileage assumption.
Using the minimax regret approach, Amy would choose Dealer C, as it has the lowest regret for any given outcome.
(d) Suppose the probabilities of driving 12,000, 15,000, and 18,000 miles per year are 0.5, 0.4, and 0.1, respectively.
Using the expected value approach:
Expected value of Dealer A = (0.5 * $10,404) + (0.4 * $11,754) + (0.1 * $13,104) = $11,214
Expected value of Dealer B = (0.5 * $10,800) + (0.4 * $10,000) + (0.1 * $12,600) = $10,980
Expected value of Dealer C = (0.5 * $11,340) + (0.4 * $11,340) + (0.1 * $11,340) = $11,340
The best decision is to choose Dealer A as it has the highest expected value.
(e) Based on the risk profile, the most likely cost is $11,214 with a probability of 0.5.
(f) Suppose the probabilities of driving 12,000, 15,000, and 18,000 miles per year are 0.3, 0.4, and 0.3, respectively.
Using the expected value approach:
Expected value of Dealer A = (0.3 * $10,404) + (0.4 * $11,754) + (0.3 * $13,104) = $11,394
Expected value of Dealer B = (0.3 * $10,800) + (0.4 * $10,000) + (0.3 * $12,600) = $10,740
Expected value of Dealer C = (0.3 * $11,340) + (0.4 * $11,340) + (0.3 * $11,340) = $11,340
The best decision is to choose Dealer A as it has the highest expected value.
Learn more about Expected value at https://brainly.com/question/14723169
#SPJ4
Complex instructions are a tradeoff between processor complexity and program simplicity.
a. True
b. False
The statement "Complex instructions are a tradeoff between processor complexity and program simplicity" is a true statement.
A complex instruction set computer (CISC) is a type of computer in which one instruction can execute numerous low-level operations (such as a load from memory, an arithmetic operation, and a memory store) or perform a high-level operation that is tailored to a specific application, requiring fewer instructions than simple processors would require to accomplish the same tasks.
When a large number of instructions are included, instructions can be made shorter, resulting in lower instruction memory demands, which is useful for small computer systems and handheld devices. As a result, a tradeoff between processor complexity and program simplicity exists. The CISC method allows for sophisticated instructions that may accomplish many low-level tasks, reducing the number of instructions required for the program to execute.
To know more about complex instruction set computer refer to:
https://brainly.com/question/28995189
#SPJ11
Suppose there is a profit-maximising monopolist in the market. The demand curve for the monopolist is given by P= 80 – 3Q, where P is the price for each unit of product and Q is quantity. The marginal cost curve is MC = 4Q. What is the equilibrium price?
a,64
b.56
c.72
d.80
The given demand curve is P = 80 – 3Q, and the marginal cost curve is MC = 4Q. To find the equilibrium price, we need to equate marginal cost and marginal revenue.
The total revenue (TR) is given by TR = P × QPut the given demand function into this equation TR = (80 – 3Q)QTR = 80Q – 3Q²The marginal revenue (MR) is the derivative of the total revenue with respect to Q MR = d(TR)/d(Q)MR = 80 – 6QThe profit maximization condition iS. MR = MC.
Substitute Q = 8 into the demand equation:P = 80 – 3QP = 80 – 3(8)P = 56Therefore, the equilibrium price is $56 (option b). The given demand curve is P = 80 – 3Q, and the marginal cost curve is MC = 4Q. To find the equilibrium price, we need to equate marginal cost and marginal revenue.
To know more about demand visit :
https://brainly.com/question/30402955
#SPJ11
At year end the perpetual records of Greta Co. showed a balance of $98,000 in the Merchandise Inventory account. The company did a year end inventory count and the actual inventory on hand was, $96,500. Please show the adjusting journal entry required. Account Name Debit Credit 2) Greta runs a perpetual system for inventory costs. At year end, it is estimated that 3% of total Sales, $535,000, will be the amount of Sales that will be returned during the next year. This will bring back an estimated $9,550 of Inventory. Please show the appropriate 2 Adjusting Entries needed. Account Name Debit Credit 2 a) b) c) Which of these Adjusting Entries would be done if Greta Co. was instead running a periodic intentory system? d) Where in the Financial Statements would the other Adjusting Entry amount be shown? Ex 6 When using a perpetual inventory system, how many closing entries does a merchandising company have, and describe these.
1. Adjusting Entry for Merchandise Inventory: Debit Merchandise Inventory by $1,500 and credit Cost of Goods Sold by $1,500.
2.Adjusting entries for estimated sales returns involve debiting Estimated Sales Returns and Allowances and crediting Allowance for Sales Returns and Allowances, and debiting Allowance for Sales Returns and Allowances and crediting Merchandise Inventory.
How to adjust entries for estimated sales returns?1) Adjusting Journal Entry for Merchandise Inventory:
Account Name Debit Credit
Merchandise Inventory $1,500
Cost of Goods Sold $1,500
2) Adjusting Entries for Estimated Sales Returns:
a) Estimated Sales Returns and Allowances $16,050
Allowance for Sales Returns and Allowances $16,050
b) Allowance for Sales Returns and Allowances $9,550
Merchandise Inventory $9,550
c) No adjusting entry is required for a periodic inventory system.
d) The amount of the adjusting entry for estimated sales returns and allowances would be shown as a contra account (reduction) to Accounts Receivable on the balance sheet.
Learn more about Merchandise Inventory
brainly.com/question/31850074
#SPJ11
Question 6 Consider the following neighbourhood composed of 4 families - Acharya, Belloc, Chen, and Davies as shown in Figure 2. Each family has income as indicated by the number in the corresponding circle (40, 15, 5, and 20) for the first letter of their last name (A, B, C, and D). D AAD yº = 20 A = 40 CD C BD LO A 4AC VA 4AB 5 B y 15 BC A Figure 3: Households A, B, C, and D and their incomes in a neighbourhood What is the Gini coefficient for this neighbourhood? Define the Gini coefficient, explain how to find it, and show your work in finding the Gini coefficient for this neighbourhood. Question 7 [10 marks] Consider the Acharya and Chen families from Question 6 above about the Gini coefficient. Assume that the numbers in the bubbles for each family correspond to an index of the family's wealth (a higher integer corresponding to greater wealth). Explain, with reference to risk preferences and the appropriate graphs, why it is the case that the Chen family would be more likely to depend on wage work and the Acharya family may choose to engage in production of goods and services with their own project (working as an owner-operator); that is, not choosing to work for wages. [10 marks]
The Gini coefficient is a measure of income inequality. It is calculated by measuring the area between the Lorenz curve and the 45-degree line.
How to explain the informationThe Gini coefficient is calculated by dividing the area between the Lorenz curve and the 45-degree line by the total area under the 45-degree line. In this case, the area between the Lorenz curve and the 45-degree line is 0.36. The total area under the 45-degree line is 0.5. Therefore, the Gini coefficient for this neighbourhood is 0.72.
A higher Gini coefficient indicates greater income inequality. A Gini coefficient of 0 indicates perfect equality, while a Gini coefficient of 1 indicates perfect inequality.
The Chen family is more likely to depend on wage work because they have lower wealth. Wage work is a relatively stable source of income, which is important for families with low wealth. The Acharya family, on the other hand, has higher wealth. They may choose to engage in production of goods and services with their own project because this gives them more control over their income and allows them to potentially earn more money.
Learn more about Gini coefficient on
https://brainly.com/question/13128534
#SPJ1
Construction rings are tested for their diameter desired to be within a certain range. Random samples of 5 rings are chosen from the despatch section and their diameter values measured. The sample mean X and standard deviation s are found. After 20 samples, EX bar = 1850 and Es -200. The specifications are 95 ± 5 mm.
a. Find the control limits for the X bar and s-charts. b. Assuming that the process in control, estimate the process mean and process standard deviation.
he process mean is 95 mm and the process standard deviation is 5 mm. Construction rings need to be within a certain diameter range, which is tested by taking random samples of 5 rings from the despatch section and measuring their diameter values.
a. Control limits for the X bar and s-charts:
Control limits for the X bar chart
Upper Control Limit (UCL) = X bar + A2SEx bar + A3s = 95 + 2.66 (5) = 107.3 mm
Lower Control Limit (LCL) = X bar - A2SEx bar - A3s = 95 - 2.66 (5) = 82.7 mm
The control limits for the X bar chart are 82.7 mm and 107.3 mm. Control limits for the s-chart
Upper Control Limit (UCL) = s + B4s = 5 + 0 (5) = 5 mm
Lower Control Limit (LCL) = s - B3s = 5 - 0 (5) = 5 mm
The control limits for the s-chart are 0 mm and 10 mm.
b. Assuming that the process is in control, estimate the process mean and process standard deviation. The mean and standard deviation can be found using the formulas below: µ = X bar = 95 mmσ = s = 5 mm
Therefore, the process mean is 95 mm and the process standard deviation is 5 mm. Construction rings need to be within a certain diameter range, which is tested by taking random samples of 5 rings from the despatch section and measuring their diameter values. This process is monitored using control charts to ensure that the diameter range remains consistent and within the desired specifications. The X bar chart is used to monitor the sample mean X, and the s-chart is used to monitor the sample standard deviation s. After 20 samples, the mean of the sample means, EX bar, is 1850, and the mean of the sample standard deviations, Es, is 200.
Using the given specifications of 95 ± 5 mm, the control limits for the X bar chart are found to be 82.7 mm and 107.3 mm. The control limits for the s-chart are found to be 0 mm and 10 mm. Assuming that the process is in control, the process mean and standard deviation can be estimated as 95 mm and 5 mm, respectively. This means that the process is within the desired specifications, and any deviations from the mean and standard deviation are due to common causes rather than special causes. Overall, monitoring the diameter range using control charts helps to ensure that the construction rings are consistent and meet the desired specifications.
To know more about standard deviation visit: https://brainly.com/question/29115611
#SPJ11
how do differing tastes play a role in creating, or
expanding markets?
Differing tastes play a role in creating or expanding markets by providing opportunities for businesses to cater to diverse consumer preferences and offer a wider range of products or services.
Consumer tastes and preferences vary among individuals due to factors such as cultural background, personal preferences, lifestyle choices, and demographics. These differences create market segments with specific needs and desires. By recognizing and understanding these varying tastes, businesses can develop and offer products or services that cater to specific segments, thereby expanding their market reach.
For example, the food industry caters to various dietary preferences such as vegan, gluten-free, or organic, which have grown in popularity due to differing tastes and health concerns. Similarly, the fashion industry offers a wide range of styles and designs to appeal to diverse fashion preferences. By embracing and accommodating differing tastes, businesses can tap into new customer segments, increase customer satisfaction, and ultimately expand their markets. This can lead to greater market share, increased sales, and business growth.
learn more about Consumer here:
https://brainly.com/question/28720878
#SPJ11
Star Health, Inc. is a fitness center in Oklahoma City. In October, the company earned $550,000 in revenues and incurred the following operating costs from 300 customers Manager's Salary Gym Rent Depreciation Expen Office Supplies Expense Utilities Expense Trainer's Salary $5,000 1,700 8,000 2,400 1,600 23,000 se-Equipment How much is the unit cost per customer? (Round your answer to the nearest cent.) OA. OB. OC. $93.33 $139.00 $19.00 $1,833.33 D.
To calculate the unit cost per customer, we need to divide the total operating costs by the number of customers.
Total operating costs = Manager's Salary + Gym Rent + Depreciation Expense + Office Supplies Expense + Utilities Expense + Trainer's Salary + Lease Equipment Expense = $5,000 + $1,700 + $8,000 + $2,400 + $1,600 + $23,000 +$13,000 = $54,700
Number of customers = 300
Unit cost per customer = Total operating costs / Number of customers
= $54,700 / 300
≈ $182.33
Rounding to the nearest cent, the unit cost per customer is $182.33.
Therefore, the correct answer is Option A: $182.33.
Visit here to learn more about operating costs:
brainly.com/question/30830429
#SPJ11
Wayfair Producers manufactures boats in two departments, Molding and Finishing. This problem focuses on the first of these departments, the Molding Department All materials in the Molding Department are added at the beginning of the production process. On April 1, the Molding Department had 30 units in process that were 20% complete with respect to conversion cost. On April 30, Molding had 20 units in process that were 40% complete with respect to conversion cost. During April, the Molding Department completed 76 units and transferred them to the Finishing Department. What are the Molding Department's equivalent units of production related to materials for April?
The Molding Department's equivalent units of production related to materials for April are 90 units.
To calculate the Molding Department's equivalent units of production related to materials for April, we need to consider the units that are in process and the units that have been completed and transferred to the Finishing Department.
Units in process as of April 1: 30 units (20% complete)
Units in process as of April 30: 20 units (40% complete)
Units completed and transferred: 76 units
To calculate the equivalent units of production, we need to determine the equivalent units for both the units in process and the completed units.
For the units in process as of April 1, the equivalent units of production related to materials would be:
30 units * 20% = 6 equivalent units
For the units in process as of April 30, the equivalent units of production related to materials would be:
20 units * 40% = 8 equivalent units
The completed units would contribute their full quantity as equivalent units, so the equivalent units for the completed and transferred units would be:
76 units * 100% = 76 equivalent units
To find the total equivalent units of production related to materials for April, we sum up the equivalent units from each category:
6 equivalent units (units in process as of April 1) + 8 equivalent units (units in process as of April 30) + 76 equivalent units (completed and transferred units) = 90 equivalent units.
Therefore, the equivalent units of production related to materials for the Molding Department in April amount to a total of 90 units.
You can learn more about production at
https://brainly.com/question/16755022
#SPJ11
Why has product differentiation become so important in sales
and marketing?
According to the buyer resolution theory, a purchase is made
only after the prospect has made five buying decisions. What ar
Product differentiation has become so important in sales and marketing because it helps businesses to distinguish their products from those of their competitors, thereby enabling them to gain a competitive advantage and increase their sales.
Product differentiation is the process of adding unique features or attributes to a product or service in order to make it stand out from others on the market and meet the specific needs of customers. By differentiating their products, businesses are able to create a perceived value in the minds of their customers, and this helps them to command a premium price. According to the buyer resolution theory, a purchase is made only after the prospect has made five buying decisions. The five buying decisions are:
Need Recognition: The buyer recognizes a problem or need that can be solved by a product or service.Information Search: The buyer gathers information about the available products or services that can satisfy their needs. Evaluation of Alternatives: The buyer compares the various options available and evaluates their suitability. Purchase Decision: The buyer makes a decision to purchase a product or service.Post-purchase Evaluation: The buyer evaluates the product or service after purchase to determine whether it meets their expectations.Therefore, businesses need to differentiate their products and services in order to influence these buying decisions and win customers over.
To know more about businesses visit :
https://brainly.com/question/31668853
#SPJ11
ten years ago, you put $150,000 into an interest-earning account. today it is worth $275,000. what is the effective annual interest earned on the account? group of answer choices
To calculate the effective annual interest earned on the account, we need to consider the initial investment and the final value after ten years. The initial investment was $150,000, and the current value is $275,000. The difference between the final value and the initial investment is $275,000 - $150,000 = $125,000.
To determine the effective annual interest, we need to divide the difference by the initial investment and then express it as a percentage. So, the effective annual interest earned can be calculated as ($125,000 / $150,000) * 100% = 83.33%. Therefore, the effective annual interest earned on the account over the ten-year period is 83.33%. This represents the average annual growth rate of the investment, taking into account compounding and the increase in value from the initial investment to the final value.
Learn more about effective annual interest here: brainly.com/question/28485951
#SPJ11
FILL IN THE BLANK both ________ and ________ increase as the safety inventory is increased
Both inventory holding costs and the level of service increase as the safety inventory is increased.
When safety inventory is increased, it leads to higher inventory holding costs. Holding costs include expenses such as storage, insurance, and obsolescence. As more inventory is held as a safety buffer, these costs accumulate. Additionally, the level of service also increases as safety inventory is augmented. Safety inventory acts as a buffer against demand variability and supply disruptions, allowing for a higher level of product availability and customer satisfaction. By having more safety inventory, companies can meet unexpected demand fluctuations and minimize stockouts, thus improving their service levels to customers.
Learn more about customers here:
https://brainly.com/question/31192428
#SPJ11
Dongguk Industry, adopting Perpetual Inventory recording system, recorded two inventory layers by the end of June 30- 1 100 units x unit cost $20 (purchased on June 25) 80 units x unit cost $22 Dongguk Industry physically counted to identify 175 units and Net Realiable Value is valued at $19 per unit. If the company uses FIFO cost flow assumption, what are the inventory shrinkage loss and inventory valuation loss? a. Inventory shrinkage loss: $100. b. Inventory shrinkage loss: $95. c. Inventory shrinkage loss: $105. d. Inventory shrinkage loss: $110. Inventory valuation loss: $335 Inventory valuation loss: $340 Inventory valuation loss: $330 Inventory valuation loss: $325 vetem?
The inventory shrinkage loss can be calculated by multiplying the cost of the missing units ($20) by the number of missing units (5):
$20 * 5 = $100. The correct answer is option (a)
To calculate the inventory shrinkage loss, we need to determine the value of the missing units using the FIFO (First-In-First-Out) cost flow assumption.
According to the information provided, Dongguk Industry recorded two inventory layers by the end of June 30th:
100 units purchased on June 25th at a unit cost of $20.
80 units purchased at an unknown date with a unit cost of $22.
The physical count revealed only 175 units, which means that 5 units are missing (100 + 80 - 175 = 5).
Using the FIFO method, the cost of the missing units would be based on the earliest purchased units, which were the 100 units purchased on June 25th at a unit cost of $20. Therefore, the cost of the missing units is $20 per unit.
The inventory shrinkage loss can be calculated:
$20 * 5 = $100
Therefore, the correct answer is option (a) Inventory shrinkage loss: $100.
To know more about inventory shrinkage loss, here
brainly.com/question/28810602
#SPJ4
--The complete question is, Dongguk Industry, adopting Perpetual Inventory recording system, recorded two inventory layers by the end of June 30- 1 100 units x unit cost $20 (purchased on June 25) 80 units x unit cost $22 Dongguk Industry physically counted to identify 175 units and Net Realiable Value is valued at $19 per unit. If the company uses FIFO cost flow assumption, what are the inventory shrinkage loss ?
a. Inventory shrinkage loss: $100.
b. Inventory shrinkage loss: $95.
c. Inventory shrinkage loss: $105.
d. Inventory shrinkage loss: $110.--
Moving to another question will save this response $26.800 $14,310 $16.200 $25,440 & Moving to another question will save this response. P Question & Dynondo incorporated planned to use materials of 59 per unit but actually used materials of $16 per unit, and planned to make 1590 units but actually made 1800 units. The flexible-budget amount for materials is
The flexible-budget amount for materials is $16,200 for 1800 units and each unit costs $9. Thus, option C is correct.
Actual units produced = 1800 units
Planned cost per unit of materials = $9 per unit
To estimate the flexible-budget amount for materials, we need to multiply the actual number of units produced by the planned cost per unit of materials from the flexible budget.
The flexible-budget amount for materials = Actual units produced x Planned cost per unit
Flexible-budget amount for materials = 1800 units x $9 per unit
Flexible-budget amount for materials = $16,200
Therefore, we can conclude that the flexible-budget amount for materials is $16,200.
To learn more about the flexible-budget
https://brainly.com/question/14202862
#SPJ4
The complete question is:
Dynondo incorporated planned to use materials of 59 per unit but actually used materials of $16 per unit, and planned to make 1590 units but actually made 1800 units. The flexible-budget amount for materials is________
a. $26.800
b. $14,310
c. $16.200
d. $25,440
5 Second-price sealed bid auction There are 2 bidders, labeled i = 1,2. Bidder i has a valuation for the good-this means that, if bidder i gets the good and pays the price p, then i's payoff is vi - p. The two bidder's valuations are independently and uniformly distributed on [0,1]. Bids are constrained to be nonnegative. The bidders simultaneously submit their bids. The higher bidder wins the good and pays the price submitted by the losing bidder (the second highest price); the other bidder gets and pays nothing In case of a tie, the winner is determined by a flip of a fair coin. The bidders want to maximize expected payoffs. (a) Determine all strategies that are weakly dominated. (b) Find a Bayesian Nash equilibrium in strategies that are not wenkly dominated.
(a) Bidding the true valuation (Strategy 1) is not weakly dominated, while bidding below the true valuation (Strategy 2) is weakly dominated.
(b) As the bidding process is simultaneous, there is no advantage in deviating from this strategy. Thus, the Bayesian Nash equilibrium is for both bidders to bid their true valuation in the second-price sealed bid auction.
(a) To determine the strategies that are weakly dominated, we need to identify strategies that are always worse than another strategy, regardless of the actions taken by other players.
In the second-price sealed bid auction, the bidders want to maximize their expected payoffs. In this case, there are two possible strategies for each bidder: bidding their true valuation or bidding below their true valuation.
Let's consider the strategies for bidder i:
Strategy 1: Bidder i bids their true valuation (vi).
Strategy 2: Bidder i bids below their true valuation (bi < vi).
Now, let's analyze the possible outcomes for each strategy:
Strategy 1: If bidder i bids their true valuation (vi), their payoff will be vi - p, where p is the price paid. This strategy ensures that if bidder i wins, they receive the good at a price equal to their valuation. If they lose, their payoff is zero. This strategy is not weakly dominated because it maximizes the expected payoff.Strategy 2: If bidder i bids below their true valuation (bi < vi), there are two possibilities: (i) bidder i wins with a bid lower than their valuation or (ii) bidder i loses. In both cases, their payoff will be vi - p, where p is the price paid. However, by bidding below their true valuation, bidder i reduces their chance of winning.Therefore, Strategy 2 is weakly dominated by Strategy 1.
(b) To find a Bayesian Nash equilibrium in strategies that are not weakly dominated, we consider the strategy where each bidder bids their true valuation (vi) as the equilibrium strategy.
In this case, both bidders know that bidding their true valuation will maximize their expected payoff. Bidding below their true valuation would only reduce their chance of winning without any advantage in terms of payoff. Therefore, bidding the true valuation is the optimal strategy for both bidders.
To know more about bidding, visit https://brainly.com/question/29218153
#SPJ11
Cullumber Company at December 31 has cash $20,600, noncash assets $108,000, liabilities $57,400, and the following capital balances: Floyd $43,400 and DeWitt $27,800. The firm is liquidated, and $119,000 in cash is received for the noncash assets. Floyd and DeWitt income ratios are 70% and 30%, respectively. Cullumber Company decides to liquidate the partnership. Prepare the entries to record: (Credit account titles are automatically indented when amount is entered. Do not indent manually.) a. The sale of noncash assets, b. The allocation of the gain or loss on realization to the partners. c. Payment of creditors. d. Distribution of cash to the partners.
The entries to record the sale of non-cash assets, the allocation of gain or loss on realization to the partners, payment of creditors, and distribution of cash to partners are presented bwlow.
a. Sale of non-cash assets: Assets Cash Non-cash Assets Total Debit Credit 119,000108,000227,000-227,000b.
Allocation of gain or loss on realization to the partners:
Partner’s Capital Account Floyd DeWitt Debit Credit Credit
Gain on realization 43,400 27,800 17,889.70 7,657.03
Loss on realization 43,400 27,800 22,110.30 9,473.97
c. Payment of Creditors:
Account Titles Debit Credit Non-cash assets 108,000
Liabilities 57,400
Gain on realization (Floyd 70%) 17,889.70
Gain on realization (DeWitt 30%) 7,657.03 83,946.73 83,946.73d.
Distribution of cash to the partners:
Account Titles Debit Credit Cash 119,000
Floyd Capital 61,289.40
DeWitt Capital 26,169.87
Gain on realization 17,889.70
Gain on realization 7,657.03 119,006.00
The entries to record the sale of non-cash assets, the allocation of gain or loss on realization to the partners, payment of creditors, and distribution of cash to partners are presented above.
To know more about assets visit:
https://brainly.com/question/14826727
#SPJ11
needham Pharmaceuticals has a profit margin of 4% an equity
multiplier of 2.4. its sales are 90 million and has total assets of
50 million. what is the return on equity? Do not round intermediate
calc
Needham Pharmaceuticals has a profit margin of 4% and an equity multiplier of 2.4. With sales amounting to $90 million and total assets of $50 million the net income will be $3.6 million and the equity is $20.83 million. Therefore, the ROE is approximately 0.1729 or 17.29%.
To calculate the return on equity (ROE) for Needham Pharmaceuticals, we need to use the given information: profit margin and equity multiplier.
Profit margin = Net Income / Sales
Given profit margin = 4% and sales = $90 million, we can calculate the net income:
Net Income = Profit margin × Sales
Net Income = 0.04 × $90 million
Net Income = $3.6 million
Next, we need to calculate the equity:
Equity = Total Assets / Equity Multiplier
Given total assets = $50 million and equity multiplier = 2.4, we can calculate the equity:
Equity = $50 million / 2.4
Equity = $20.83 million
Finally, we can calculate the return on equity (ROE) using the formula:
ROE = Net Income / Equity
ROE = $3.6 million / $20.83 million
ROE = 0.1729
The return on equity (ROE) for Needham Pharmaceuticals is approximately 0.1729, or 17.29% (rounded to two decimal places).
Learn more about return on equity https://brainly.com/question/30404824
#SPJ11
The actual variable costs are $25500 and the actual units produced total 275 and the actual direct labour hours total 550. If the budgeted hour per unit are 3 and the budgeted variable cost allocation rate is $25 and the budgeted units to be produced are 225 . What is the rate Variance, Efficiency Variance and Flexible Budget variance is the allocate variable costs based on direct labour hours. Be sure to indicate whether the variances are favourable or unfavourable.
As per the given values, the rate variance is -$28.64, the efficiency variance is -$6,875, and the flexible budget variance is $1,250
Actual variable costs = $25,500
Actual units produced = 275
Actual labor hours = 550
Budgeted hours per unit = 3
Budgeted variable cost allocation rate = $25
Budgeted units to be produced = 225
Calculating the Rate Variance -
Rate Variance = Actual Variable Cost/ Actual Labor - Budgeted VC/ Budgeted hours
($25,500 / 550) - ($25 x 3)
= $46.36 - $75
= -$28.64 ( Unfavorable variance)
Calculating the Efficiency Variance -
Efficiency Variance = Actual Labor hours - ( Units produced x Budgeted hours) x Budgeted variable cost
= (550 - (275 x 3)) x $25
= (550 - 825) x $25
= -275 x $25
= -$6,875 ( Unfavorable variance)
Calculating the Flexible Budget Variance -
Flexible Budget Variance = Actual Units - Budgeted Units x Variable Cost
= (275 - 225) x $25
= 50 x $25
= $1,250
Read more about variance on:
https://brainly.com/question/15858152
#SPJ4
If two firms in a duopoly play their dominant strategies, consumers may end up paying than they would have if the firms had
O the same prices; cooperated
O none of these answers is correct
O lower prices; competed with each other
O higher prices; cooperated
O lower prices; cooperated
If two firms in a duopoly play their dominant strategies, the outcome for consumers may result in higher prices compared to what they would have paid if the firms had competed with each other. So, the fourth option is correct.
When both firms independently choose their dominant strategies, which often involve setting higher prices or limiting output, it can lead to a lack of price competition in the market.
By playing their dominant strategies, the firms prioritize their own profits rather than engaging in price competition to attract customers.
This behavior reduces consumer welfare by limiting choices and keeping prices artificially high. It can lead to a scenario where consumers end up paying more than they would have if the firms had competed with each other.
The option "higher prices; cooperated" reflects this outcome accurately. When firms cooperate by playing their dominant strategies, it often results in higher prices and reduced consumer surplus.
This situation is known as collusion, where firms agree to limit competition and keep prices elevated to maximize their profits.
In contrast, if the firms had competed with each other, it would likely lead to lower prices as they engage in price wars to attract customers. However, when firms have dominant strategies and choose to cooperate instead of competing, it can result in higher prices, negatively impacting consumer welfare.
So, the fourth option is correct.
Learn more about consumers:
https://brainly.com/question/380037
#SPJ11
1. If an investment of BD10,450 will be given in an interest rate of 15% for the period from (January1 to September 30, 2024). What is the value of the exact simple interest and the total payable amount? solve the problem showing cash flow, and final answer using a suitable formula. (10 POINTS) 2. Mohamed has been borrowed BD 95,000 at 8% annually on compound interest. At the end of every year, he pays BD 1,100 as part payment of loan and interest. How much does still owe to the bank after 3 such annual payments? solve the problem showing cash flow, and final answer using a suitable formula. ( 10 POINTS)
1)The value of the exact simple interest and the total payable amount is BD 784.50 and BD 11,234.50 respectively.
2)Mohamed still owes BD125,966.56 to the bank after 3 annual payments.
1. Let us calculate the simple interest first.
I = P * r * tP = BD10,450
r = 15% = 0.15
t = 9 months = 9/12 years
I = 10,450 * 0.15 * (9/12)= BD 784.50
Now, let us calculate the total payable amount.
Total payable amount = P + I= BD10,450 + BD 784.50= BD 11,234.50
Therefore, the value of the exact simple interest and the total payable amount is BD 784.50 and BD 11,234.50 respectively.
2. Let us first calculate the interest for the first year. It will be the product of the interest rate and the principal amount.
I1 = P * r
P = BD95,000
r = 8% = 0.08
I1 = 95,000 * 0.08 = BD7,600
Now, let us calculate the outstanding loan amount after the first payment.
Outstanding loan amount = (P + I1) - Payment= (95,000 + 7,600) - 1,100= BD101,500 - BD1,100= BD100,400
Now, let us calculate the interest for the second year.I2 = 100,400 * 0.08 = BD8,032
Now, let us calculate the outstanding loan amount after the second payment.
Outstanding loan amount = (P + I1 + I2) - (Payment + Payment)= (95,000 + 7,600 + 8,032) - (1,100 + 1,100)= BD110,132 - BD2,200= BD107,932
Now, let us calculate the interest for the third year.I3 = 107,932 * 0.08 = BD8,634.56
After the third payment, the outstanding loan amount is:
Outstanding loan amount = (P + I1 + I2 + I3) - (Payment + Payment + Payment)= (95,000 + 7,600 + 8,032 + 8,634.56) - (1,100 + 1,100 + 1,100)= BD129,266.56 - BD3,300= BD125,966.56
Therefore, Mohamed still owes BD125,966.56 to the bank after 3 annual payments.
Learn more about simple interest at:
https://brainly.com/question/30824126
#SPJ11
John is looking to sell his car and Mary is looking to buy it. John values the car at $2000 and Mary values it at $3000. John places an add in the newspaper and Mary must either accept the offer or ignore it. Which of the following prices would be the best price for John to advertise the car for? a. $2000 b. $2500 c. $3500 d. $2999 e. John is indifferent between any of these prices.
The best price for John to advertise the car for would be $2999. Option D is answer.
In this scenario, John wants to maximize his selling price for the car, while Mary wants to minimize her buying price. John values the car at $2000, while Mary values it at $3000. The price John advertises will determine whether Mary decides to accept or ignore the offer.
If John advertises the car for $2000 (option a), Mary will definitely accept the offer since it matches her valuation. However, John would be selling the car below its actual value, resulting in a lower profit.
If John advertises the car for $3500 (option c), Mary would ignore the offer as it exceeds her valuation. John will not be able to sell the car in this case.
Between the remaining options (b, d, and e), the best price for John to advertise the car is $2999 (option d). At this price, John is offering the car slightly below Mary's valuation, creating an attractive deal for her. This increases the likelihood of Mary accepting the offer and allows John to maximize his selling price.
Option D is answer.
You can learn more about price at
https://brainly.com/question/1153322
#SPJ11
in response to the trump administration's tariffs on chinese imports, only one percent of the surveyed u.s. firms operating in southern china said they had any plans to establish manufacturing bases in north america. assuming that managers at these companies used all available information, including the tariffs on chinese imports, when making the decision of whether or not to move production out of china and back to the united states exemplifies which key economic idea?
In response to the Trump administration's tariffs on Chinese imports, only one percent of the surveyed U.S. firms operating in southern China said they had any plans to establish manufacturing bases in North America.
This exemplifies the principle of opportunity cost. An opportunity cost refers to the value of the next-best alternative foregone when making a decision.Explanation:When a firm is considering establishing a manufacturing base in the United States, the opportunity cost is the value of the alternative investment. Managers evaluate the costs and benefits of producing in the United States or any other country before making a decision.
Managers must consider the opportunity cost when deciding whether to establish a manufacturing base in the United States, even if they are aware of the tariffs on Chinese imports. The decision to produce in China or the United States is based on a comparison of the opportunity cost of each location. The managers of the firms in the surveyed U.S.
To know more about establish visit:
https://brainly.com/question/29503418
#SPJ11
When a tax dispute is resolved, interest is paid by or to the
government. How are IRS interest amounts determined? To which tax
amounts do they apply?
When a tax dispute is resolved, interest is paid by or to the government. The interest amount paid to or by the government is determined by the IRS based on the underpayment rate and the overpayment rate. It applies to the tax amounts that were underpaid or overpaid by the taxpayer.
The underpayment rate is the interest rate charged by the IRS when taxpayers underpay their taxes. It is calculated by adding the federal short-term rate, which is the market interest rate, plus 3%. The rate is computed quarterly and is adjusted in response to changes in market rates.
The overpayment rate is the interest rate paid by the IRS on any refunds issued to taxpayers. It is calculated by adding the federal short-term rate, which is the market interest rate, plus 2%. The rate is computed quarterly and is adjusted in response to changes in market rates.
The IRS interest amounts are determined based on the underpayment rate or the overpayment rate, depending on whether the taxpayer underpaid or overpaid their taxes. These rates apply to the tax amounts that were underpaid or overpaid by the taxpayer.
For more question on interest
https://brainly.com/question/30584212
#SPJ11
ilicon Inc. has provided the following information for the year ended December 31, Year 1.
Master Budget Actual Costs
5,000 units 4,500 units
Direct materials $ 35,000 $ 32,500 Direct labor 15,000 12,500 Variable manufacturing overhead 8,000 7,800 Fixed manufacturing overhead 16,000 17,500 Total manufacturing cost $ 74,000 $ 70,300 Knowledge Check 01
What is the direct materials spending variance?
a) $1,000 favorable
b) $1,000 unfavorable
c) $3,500 favorable
d) $3,500 unfavorable
The direct materials spending variance for Silicon Inc. is $1,000 unfavorable. The correct answer is b) $1,000 unfavorable.
To calculate the direct materials spending variance, we need to compare the actual costs of direct materials with the budgeted costs.
The budgeted direct materials cost is $35,000 for 5,000 units, which gives us a standard cost per unit of $7 ($35,000 / 5,000 units).
The actual direct materials cost is $32,500 for 4,500 units.
To find the direct materials spending variance, we calculate the difference between the actual cost and the budgeted cost:
Actual cost - Budgeted cost = $32,500 - ($7 * 4,500) = $32,500 - $31,500 = $1,000 unfavorable.
Therefore, the direct materials spending variance is $1,000 unfavorable.
To know more about Silicon Inc click here:
https://brainly.com/question/28213172
#SPJ11
A A Aa A E E AL Normal Number List LL No Spacing A A 、出 Paragraph Fy Styles the Office Mobile App Get started 1112131415161718-19-1 10 11 1 12 1 13 1 14 15 Question 5 [There are 100 workers in Pakistan, and each worker can produce either 10 shirts or 2 hats. There are 200 workers in the Bangladesh, and each can produce 4 shirts or 10 hats.] a. [Draw the Production Possibility Curves (PPC) for each country. What is the opportunity cost of shirts in Pakistan? What is the opportunity cost of shirts in Bangladesh? Which country has a comparative advantage in the production of shirts? (5 marks).] b. [In the absence of trade, if Pakistan consumes 600 shirts, how many hats can it consume? In the absence of trade, if Bangladesh consumes 500 hats, how many shirts can it consume? (2 marks)] c. [Someone now proposes that Bangladesh and Pakistan enter into a trade agreement. Under this agreement, the Bangladesh will give Pakistan 500 hats and Pakistan will give Bangladesh 200 shirts. If Pakistan continues to consume 600 shirts, how many hats will it be able to consume under this proposal? If Bangladesh continues to consume 500 hats, how many shirts will it be able to consume under this proposal? Should Pakistan accept this proposal? Should Bangladesh accept this proposal? (3 marks)] Answer 三 Heading 1 Headi
Production Possibility Curves (PPC) for each country:In Pakistan, a worker can produce 10 shirts or 2 hats. So, if all the workers are producing shirts, they can produce 1000 shirts (10 shirts per worker × 100 workers).
On the other hand, if all the workers are producing hats, they can produce 200 hats (2 hats per worker × 100 workers).The opportunity cost of shirts in Pakistan: It is the number of hats that have to be sacrificed in order to produce an extra shirt. In Pakistan, the opportunity cost of a shirt is 2. It means that for every additional shirt produced, 2 fewer hats will be produced. Opportunity cost of shirts in Bangladesh: In Bangladesh, a worker can produce 4 shirts or 10 hats.
So, if all the workers are producing shirts, they can produce 800 shirts (4 shirts per worker × 200 workers). And if all the workers are producing hats, they can produce 2000 hats (10 hats per worker × 200 workers).The opportunity cost of a shirt in Bangladesh is 2.5 (2000/800). It means that for every additional shirt produced, 2.5 fewer hats will be produced. So, Bangladesh has a comparative advantage in the production of shirts.b. In the absence of trade:Pakistan can produce either 10 shirts or 2 hats per worker.
To know more about Production visit:
https://brainly.com/question/30333196
#SPJ11
A company decides to create a new titanium range of their men's wedding rings. To do this they will need to buy titanium metal and a new laser sizing tool to ensure exact sizing (titanium can't be resized).
The current price for a silver men's ring is AED10,000 and it costs the company AED5,000 to make. Customers are willing to pay an extra AED5000 for a similar yet titanium-based ring. However, over the first year it is estimated to cost the company an extra AED2,000 per ring for the titanium metal and AED1,000 per ring for the laser sizing machine (across the first year). Based on a value-based pricing what is the maximum they could price their new titanium ring?
a. 13,000 AED
b. 15,000 AED
c. 18,000 AED
d. 20,000 AED
Based on value-based pricing, the maximum price the company could set for their new titanium ring would be d. 20,000 AED.
To determine the maximum price, we consider the additional costs and the willingness of customers to pay a premium for the titanium-based ring.
The current cost to make a silver ring is 5,000 AED, and customers are willing to pay an extra 5,000 AED for a titanium ring. This gives us a base price of 10,000 AED (cost to make) + 5,000 AED (customer willingness to pay) = 15,000 AED.
However, we need to account for the additional costs of using titanium and the laser sizing machine. These costs amount to 2,000 AED for titanium metal and 1,000 AED for the laser sizing machine per ring, totaling 3,000 AED in additional costs per ring.
By adding the additional costs to the base price, we get 15,000 AED + 3,000 AED = 18,000 AED.
Since the question asks for the maximum price, we round up to the nearest option, which is d. 20,000 AED. This pricing allows the company to cover the additional costs associated with the new titanium range while maximizing their potential profit.
learn more about "company ":- https://brainly.com/question/24553900
#SPJ11
Determine whether each of the following would fulfill the three functions of money. If the item does not fulfill all three, name at least one function of money that it violates.
Instructions: You may select more than one answer. Click the box with a check mark for correct answers, and click to empty the box for the wrong answers.
1. Salt
a. Salt could be a good store of value because salt keeps for a long time.
b. Salt fulfills the medium of exchange function if people are willing to accept it in exchange for goods and services.
c. Salt could be a good unit of account as long as people can agree on the prices in terms of salt.
d. Salt could be a medium of exchange because it is useful.
e. Salt could be a unit of account because it can be easily measured.
Based on the provided statements, let's evaluate whether salt fulfills the three functions of money:
Store of value:
a. Salt could be a good store of value because salt keeps for a long time. (Correct)
Medium of exchange:
b. Salt fulfills the medium of exchange function if people are willing to accept it in exchange for goods and services. (Correct)
d. Salt could be a medium of exchange because it is useful. (Correct)
Unit of account:
c. Salt could be a good unit of account as long as people can agree on the prices in terms of salt. (Correct)
e. Salt could be a unit of account because it can be easily measured. (Incorrect)
Although salt may be easily measured, it is not commonly used as a unit of account in modern economies. Therefore, salt violates the unit of account function of money.
In summary, salt fulfills the functions of money as a store of value and a medium of exchange, but it does not fulfill the unit of account function.
Learn more about the functions of money here https://brainly.com/question/14745106
#SPJ11
According to the New Trade Theory, after the Home country begins trading with another country: (3 Marks) (a) Home consumers have access to more products than before (b) Home firms have access to more consumers than before (c) The number of Home firms decreases in the long run (d) All answers are correct
The New Trade Theory suggests that after the Home country begins trading with another country, home firms have access to more consumers than before.
New Trade Theory is a branch of economics that deals with the rise of globalization. It claims that economies of scale, network effects, and first-mover benefits provide businesses with long-term competitive advantages.
These factors enable companies to manufacture goods at a lower cost than their competitors while providing consumers with more options and lower prices .In relation to the question, the correct option is:(b) Home firms have access to more consumers than before.
To know more about Trade Theory visit :
https://brainly.com/question/30175989
#SPJ11
the italian bread company purchased land as a factory site for $67,000. an old building on the property was demolished, and construction began on a new building. costs incurred during the first year are listed as follows: demolition of old building $ 8,700 sale of salvaged materials (1,100) architect fees (for new building) 18,500 legal fees (for title investigation of land) 2,700 property taxes on the land (for the first year) 3,700 building construction costs 570,000 interest costs related to the construction 21,500 required: determine the amounts that the company should record in the land and the building accounts
The costs associated with hiring an architect, hiring a lawyer, and other expenses are not immediately related to the original recording of the land and building accounts, but they could be viewed as part of the total cost of construction and included in the building account.
The amounts that the company should record in the land and building accounts are as follows:
Land Account:
Purchase price of land: $67,000
Property taxes on the land (for the first year): $3,700
Total recorded in the Land Account: $67,000 + $3,700 = $70,700
Building Account:
Building construction costs: $570,000
Interest costs related to the construction: $21,500
Total recorded in the Building Account: $570,000 + $21,500 = $591,500
It's crucial to remember that the old structure's demolition and the sale of its salvaged components should be handled as separate transactions and not directly recorded in the land or building accounts.
To know more about Property taxes, here
brainly.com/question/30757120
#SPJ4