Answer:
(n, l, m sub l, m sub s)
N: principle quantum number (1,2,3,4,etc)
l: angular momentum quantum number, the shape (l has to be at least 1 less than n, but can be 0 depending on n)
M sub l: magnetic quantum number (l determines this number)
M sub s: spin quantum number (can only ever be 1/2 or -1/2)
Explanation:
The principle, azimuthal, magnetic, and spin quantum numbers specify the principle shell, the shape of the orbital, the number of orbitals, and electron spin respectively.
What are the quantum numbers?The set of numbers that describes the position and energy of the electron are called quantum numbers. Four quantum numbers are principal, azimuthal, magnetic, and spin quantum numbers.
Principal quantum numbers (n) designate the principal electron shell of the atom and the most probable distance between the nucleus and the electrons. A larger value of the principal quantum number indicates a large distance between the electron and the nucleus.
The azimuthal quantum number (l) describes the shape of an orbital in which an electron is present. Its value is equal to the total number of angular nodes in that orbital.
The magnetic quantum number describes the total number of orbitals in a subshell and the orientation of these orbitals. The value of the spin quantum number (s) offers the direction in which the electron is spinning and it has only two possible values +½ and -½.
Learn more about quantum numbers, here:
https://brainly.com/question/16977590
#SPJ2
negative ions form when atoms _______ valence electrons.
Answer:
Negatively charged ions are called anions, and an anion is formed when an atom gains an electron. Thus, the atom has an extra charge of electrons,
Explanation:
so it becomes negatively charged.
Negative ions (or anions) are atoms that have gained electrons.
Electrons have a negative charge so if an atom is getting more of them, it's becoming more negative.
What is the element name for mg2SiO4
Answer:
forsterite
Explanation:
Why is carbon an element and not a compound?
A. Carbon bonds easily with oxygen, but not helium.
B. All carbon atoms have the same number of protons.
o C. All carbon atoms have the same number of neutrons.
.
D. Carbon is found in all living organisms.
Answer:
Carbon is found in all living organisms.
Answer: d
Explanation: i promise I've took the k-12 test
Why do we use the mole concept ??
Answer:
Here
Explanation:
Chemists need the mole concept to bridge the gap between the microscopic world of atoms to the macroscopic world of humans. As you know, the molecular level consists of particles that are invisible to us.
Answer:
it allows us to count atoms and molecules by weighing macroscopic amounts of material.
lol can some have helo me out its easy
1, 2 and 3
Answer:
1. A
2. C
3. C
Explanation:
1. there are single cell organisms
2. all others are abiotic factors
3. individual is just one, population is one species, community is all populations, ecosystem includes abiotic and biotic factors, biome is a large geographical area.
what are 5 different bases for birds
Answer:
adenine, guanine, cytosine, thymine, and uracil
answer pls ASAP will mark the brainliest
For me that is the first :
Both the identity and the properties of a substance change.
Which statement about exothermic reactions is TRUE?
A.In an exothermic reaction, energy is absorbed, bonds are broken, and the temperature decreases.
B. In an exothermic reaction, energy is released, bonds are formed, and the temperature increases.
Which statement about exothermic reactions is TRUE?
A.In an exothermic reaction, energy is absorbed, bonds are broken, and the temperature decreases.
B. In an exothermic reaction, energy is released, bonds are formed, and the temperature increases.Which traits does the western harvest mouse have that might be adaptive for the environment where it lives?
Its tail helps it climb down the tall grasses and lets it swing from the grass like a monkey in a tree
Explanation:
Answer:
Into the adaptive Trait!
Explanation:
Calculate the percent composition by mass of each element in NaClO2.
Answer: Divide the mass of the first dissolved component by the solution mass, and then multiply the result by 100 to calculate the mass percentage. In our example, the first dissolved compound is NaCl; the mass percent is (10 g / 136 g) x 100 percent = 7.35 percent.
Explanation: its up, look
How do we determine the volume of an irreguler shaped object?
Answer:
You can measure the displacement when the object is placed in a certain volume of water.
Using a lamp without a shade and a baseball, Juan turned on the lamp and placed it on one side of a darkened room. He sat on the other side of the room and held the baseball between his face and the lamp.
Based on the model, what would the final step of his model?
Answer:b
Explanation:
A car moves with a velocity of 15 m/s west for 3 seconds. Then, the
car moves with a velocity of 15 m/s east for 1 second. What is the
total displacement of the car?
Answer:
450 metre
Explanation:
VELOCITY = DISPLACEMENT /TIME TAKEN. THEREFORE THE DISPLACEMENT = 450 M.
Explanation:
Help meeeeeeeeeeeeeee
Hydrogen sulfide gas is combusted with oxygen gas to produce sulfur dioxide gas and water vapour. If there is 48.4 L of oxygen available. What volume of hydrogen sulfide gas may be combusted if the pressure and temperature are held constant?
Answer:
2H2S + 3O2 → 2SO2 + 2H2O
V(O2) = 48.4 L
p = 105 kPa = 1.036 atm
T = 190 + 273 = 463 K
Ideal gas law:
pV = nRT
n = \frac{pV}{RT}n=
RT
pV
R = 0.08206 L×atm/mol×K
n(O2) = \frac{1.036 \times 48.4}{0.08206 \times 463}=1.319 \; mol=
0.08206×463
1.036×48.4
=1.319mol
According to the reaction:
n(H2S) = \frac{2}{3}
3
2
n(O2) = \frac{2}{3} \times 1.319 = 0.8798 \;mol
3
2
×1.319=0.8798mol
V = \frac{nRT}{p} \\ V(H_2S) = \frac{0.8798 \times 0.08206 \times 463}{1.036}=32.26 \;LV=
p
nRT
V(H
2
S)=
1.036
0.8798×0.08206×463
=32.26L
Answer: 32.26 L
Explanation:
The formula of alkanes contain 3 5 7 and 9 carbon atoms
Explanation:
In organic chemistry, an alkane, or paraffin (a historical trivial name that also has other meanings), is an acyclic saturated hydrocarbon. In other words, an alkane consists of hydrogen and carbon atoms arranged in a tree structure in which all the carbon–carbon bonds are single.
Question 116 g of sunflower oil is
used in a recipe. The density of the
oil is 0.925 g/mL. What is the volume
of the sunflower oil in mL?
Explanation:
Volume = mass ÷ density
= 116 g ÷ 0.925 g/mL
= 125.41 mL
A 116 g of sunflower oil of 0.925 g/mL has a volume of 125.41 mL.Select the part that contains the information that a plant cell uses for growth and activities.
a. golgi b. vacuole c. chromosomes d. chloroplasts
The part that contains the information that a plant cell uses for growth and activities is known as Chromosome. Thus, the correct option for this question is C.
What are Chromosomes?Chromosomes may be defined as thread-like structures that appear during cell division. These structures are present in the nucleus of the cell and are made up of DNA, RNA, histones, and some non-histone proteins.
Chromosomes were first discovered by E. Strasburger in 1875. But the term chromosome was given by Waldeyer in 1888. Ultimately, the nucleus of the cell contains all sorts of genetic information which are essential for the growth and activities of organisms.
The Nucleus contains DNA which is known as the genetic material of most organisms including plants.
Therefore, a chromosome is a part that contains the information that a plant cell uses for growth and activities. Thus, the correct option for this question is C.
To learn more about Chromosomes, refer to the link:
https://brainly.com/question/13148765
#SPJ2
why are some substances such as magnesium and fluoride allowed in drinking water?
Answer:Pure water does not contain fluoride, but much drinking water does contain fluoride that is deliberately added to reduce tooth decay of children who drink the water. Some drinking water supplies also contain fluoride naturally.
Explanation:
in small doses not harmful
Fluoride is a chemical that is intentionally added to drinking water in order to prevent tooth decay in children. Pure water does not naturally contain fluoride. Some sources of drinking water naturally contain fluoride as well.
Why magnesium and fluoride allowed in drinking water?Fluoride is a chemical that is intentionally added to drinking water in order to prevent tooth decay in children. Pure water does not naturally contain fluoride. Some sources of drinking water naturally contain fluoride as well.
Compared to magnesium found in food, magnesium in water is present as hydrated ions, which are more easily absorbed. Thus, the role played by water magnesium in the prevention of magnesium insufficiency may be quite important for people who drink water with high magnesium levels.
To learn more about magnesium and fluoride refer to:
https://brainly.com/question/20217768
#SPJ2
Someone pls help me I will make you brain
c- i and iii
I hope this helps
Nguyên tử nguyên tố sắt có 26e
a. Viết cấu hình e của sắt
b. Sắt thuộc nguyên tố s,p,d,f
Answer:
1s2 2s2 2p6 3s2 3p6 3d6 4s2
Explanation:
How do the claims in drug ads impact the medical profession in 4 sentence
Answer:
But drug advertising is not all about deception. It can offer helpful information if you know what to look for. "Advertisements can offer information on drugs that may help many older men, especially those who have conditions that may be tough to treat or manage, such as diabetes and hypertension,"
Predict the ions that form when magnesium(group IIA) and nitrogen (group VA) react:.
Answer: Mg²⁺ & N³⁻
Explanation:
Since Magnesium is in group 2, then it favors losing two electrons forming a cation with a charge of +2 ( Mg²⁺).
Since Nitrogen is in group VA, it favors gaining three electrons forming the anion with charge -3 (N³⁻).
a reaction is said to be ________ if the bonds formed during the reaction are stronger than the bonds broken.
Answer:
Exothermic
Explanation:
Bond strength has everything to do with the energy associated with it. What I mean by that, is a stronger bond will require a lot higher of an energy input to break than a weaker bond.
In the same way, energy is released when a bond is made. So, the formation of a stronger bond releases more energy than the formation of a weaker bond.
So, putting the two ideas together, if the bonds formed as stronger than the bonds broken, then more energy is released than taken in, which means energy is released overall over the course of the reaction. This means that the reaction is exothermic.
If there was energy taken in overall, this would be an endothermic reaction.
Let me know if that makes sense, and hope I helped! :)
Exothermic reaction is a reaction in which the bonds formed during the reaction are stronger than the bonds broken.
When chemical reactions occur, there will always be an accompanying energy change.
In exothermic reaction the bonds formed in the products are stronger than the bonds broken in the reactants whereas in endothermic reaction the bonds broken in the reactants are stronger than the bonds formed in the products.
Find out more at: https://brainly.com/question/1689737
3. If you drive for 3 hours at a constant speed and make it 400 miles, how fast did you go?
Answer:
133.333333333 mph
or
214.5791999994464 kph
Explanation:
Answer:133.333333333 mph
or
214.5791999994464 kph
Explanation:
1. ___is the speed and direction of movement.
1 Acceleration
2Density
3Velocity
4Work
Answer:
VELOCITY
Explanation:
VELOCITY IS THE SPEED AND DIRECTION OF MOVEMENT
Explanation:
velocity
reason: The velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time. Velocity is equivalent to a specification of an object's speed and direction of motion (e.g. 60 km/h to the north).
6. Which of the following is a binary compound?
a. CaCO3
b. CuSO4
c. H2O
d. Pb(NO3)2
Answer:
The answer to your question is c. H2O
Explanation:
a. CaCO3 ----> Calcium Carbonate is obviously not a binary compound because it contains more than two elements.
b. CuSO4 ----> CuSO4 stands for copper(II) sulfate. Sulfate is the polyatomic ion SO4 -2.
c. H2O ----> Binary molecular compounds are composed of only two elements. Examples are H2O, NO, SF6 etc.
d. Pb(NO3)2 ----> Lead(II) nitrate is an inorganic compound with the chemical formula Pb(NO3)2.
I hope this helps and have a great day!
which group of elements would react with lithium
Explanation:
lithium has group 1 elements and it valance electron has 1
so it more react with group 7 to be more stable
Why do planets orbit faster as they get closer to the Sun?
The orbit becomes smaller closer to the Sun.
The orbit becomes smaller closer to the Sun.
The eccentricity changes as the planet gets closer to the Sun.
The eccentricity changes as the planet gets closer to the Sun.
The force of gravity increases closer to the Sun.
The force of gravity increases closer to the Sun.
The Sun's magnetism causes a "sling shot" effect.
Explanation:
The speed at which a planet orbits the Sun changes depending upon how far it is from the Sun. When a planet is closer to the Sun the Sun’s gravitational pull is stronger, so the planet moves faster. When a planet is further away from the sun the Sun’s gravitational pull is weaker, so the planet moves slower in its orbit.
2. Differentiate the types of tectonic plates.
There are three main types of plate boundaries:
Convergent boundaries: where two plates are colliding. Subduction zones occur when one or both of the tectonic plates are composed of oceanic crust. ...
Divergent boundaries – where two plates are moving apart. ...
Transform boundaries – where plates slide each other.
sorry pag mali ...Answer:
Convergent boundaries: where two plates are colliding. Subduction zones occur when one or both of the tectonic plates are composed of oceanic crust. ...
Divergent boundaries – where two plates are moving apart. ...
Transform boundaries – where plates slide passed each other.
Explanation: