The post collision speed of the Mazda Miata and the pick up truck as they slide across the ice are respectively 6.36 m/s and 5.64 m/s.
What is elastic collision?An elastic collision is one in which the system does not experience a net loss of kinetic energy as a result of the collision.
Given that masses of the Mazda Miata and the pick-up truck are respectively 976.0 kg and 3178.0 kg.
Pre-collision speed of Ima = 12.0 m/s.
As the collision is elastic in nature,
The post collision speed of the Mazda Miata =
{(976.0 - 3178.0)/(976.0 - 3178.0)} × 12.0 m/s
= - 6.36 m/s.
The post collision speed of the pick up truck =
{(2×976.0)/(976.0 - 3178.0)} × 12.0 m/s
=5.64 m/s.
Hence, the post collision speed of the two entangled cars as they slide across the ice are respectively 6.36 m/s and 5.64 m/s.
Learn more about elastic collision here:
https://brainly.com/question/12941951
#SPJ1
A 12.0 volt battery is connected in a series to 4 identical 5.00 ohm resistors connected in parallel to each other. What is the current through the battery?
Answer:
9.6 Amperes
Explanation:
since the resistors are connected in parallel connection the equivalent resistance is1/R = 1 /5 + 1/5 + 1/5 + 1/5
solving for R we get 5/4 ohms
then from V=IR
I = V/R
I=12/(5/4)
hence I= 9.6 Amperes
A 12.0-volt battery is connected in a series, then the current through the battery is 9.6 A.
What are Resistors?Electrical resistance is implemented as a circuit element by resistors, which are passive two-terminal electrical components. Resistors are devices that are used in electronic circuits for a variety of purposes, including lowering current flow, adjusting signal levels, dividing voltages, biasing active components, and terminating transmission lines.
As part of motor controllers, power distribution systems, or as test loads for generators, high-power resistors that can dissipate many watts of electrical energy as heat may be used.
According to the question,
1/R = 1 /5 + 1/5 + 1/5 + 1/5
R = 5/4 ohms
By ohm's law,
V=IR
I = V/R
I=12/(5/4)
I= 9.6 Amperes
To get more information about Resistors :
https://brainly.com/question/24297401
#SPJ6
What is the equivalent of 0° C in Kelvin?
Help will give brainiest
Answer:
273.15 dat is the answer im pretty sure
Which of the following terms describes the area where the Himalaya Mountains formed?
A.Divergent Boundary
B.Convergent Boundary
C. Subductive Zone
D. Transform Boundary
Answer:
B
Explanation:
The Himalayan Mountains formed at a convergence plate boundary between the Eurasian plate and the Indian plate.
Can anybody help??????
Answer:
b
Explanation:
I think its b, a molecule
Define the term kinetic frictional force
Answer:Kinetic friction is defined as a force that acts between moving surfaces. A body moving on the surface experiences a force in the opposite direction of its movement. The magnitude of the force will depend on the coefficient of kinetic friction between the two material.
Explanation:
What type of energy is thermal energy? A. Sound energy B. Chemical energy C. Kinetic energy D. Nuclear energy
Answer:
kinetic energy
Explanation:
Please help Draw where the rays will go and label the type of mirror.
Answer:
Explanation:
Please check the picture and consider straight lines
Calculate the refractive index for a substance where the angle of incidence is 300 , the angle of refraction is 600 , and the refractive index of second substance is 1.5
Answer:
η₁ = 2.6
Explanation:
Here, we will use snell's law to calculate the refractive of the substance:
[tex]\frac{\eta_2}{\eta_1} = \frac{Sin\theta_1}{Sin\theta_2}[/tex]
where,
η₁ = refractive index of first substance = ?
η₂ = refractive index of second substance = 1.5
θ₁ = angle of incidence = 30°
θ₂ = angle of refraction = 60°
Therefore,
[tex]\frac{1.5}{\eta_1} = \frac{Sin\ 30^0}{Sin\ 60^0}[/tex]
η₁ = 2.6
Which describes the motion in a convection current? horizontal motion only vertical motion only linear motion circular motion
Answer:
circular motion
Explanation:
Circular motion can be regarded as
movement of particular object along the circumference in a circle. It is
rotation of particular object along a circular path. Circular motion could be
uniform, along with constant angular rate of rotation as well as constant speed. It could also be non-uniform along with changing rate of rotation. The acceleration that is been experienced when one is in uniform circular motion is called"Centripetal acceleration"
Convection currents is type of current that takes place after a reservoir of fluid has been heated at the bottom, then cool at the top.the fluid expand as a result of Heat , then density decreases, the plates on top of them is been carried as a result of circular motion of the convection
A convention current is a circular movement which is set up due to temperature difference between two layers of a fluid.
What is a convection current?A convention current is a movement which is set up due to temperature difference between two fluids.
Convection currents are set up in liquids and gases.
Hotter and less dense fluids move upwards while colder and denser fluids move downwards.
Therefore, convection currents involve circular motion.
Learn more about convection currents at: https://brainly.com/question/25957304
PLEASE ANSWER THIS ASAP I WILL MARK YOU THE BRAINLIEST The actual subject is Science but they dont have that as a option in pick a subject
Answer:
Answer 4, 11k/min
Explanation:
From 0 - 1 km, it took 12 minutes
From 1 - 2 km, it took 10 minutes.
10 + 12 = 22
Divide the time by 2 km. 22/2 = 11
WILL MAKE BRAINLIEST! How does Hooke’s law help us understand the force and energy in elastic materials?
Answer:
How does Hooke’s law help us understand the force and energy in elastic materials?:
When the elastic materials are stretched, the atoms and molecules deform until stress is been applied and when the stress is removed they return to their initial state
Explanation:
why is fluorine more chemically reactive than
nitrogen?
Answer:
Nitrogen has Electronic configuration 1s2 2s2 2p3. Fluorine has Electronic configuration 1s2 2s2 2p5 i.e. nitrogen has half filled p subshell that makes it more stable than fluorine and fluorine requires only 1 electron to complete it's octet to get stable..Therefore Fluorine is more reactive than Nitrogen.
Hope it helps you
If force 1 has a magnitude of 5 N (forward) and force 2 has a magnitude of 30 N (forward), what is the net force acting on the object?
A.) 25 N forward
B.) 35 N forward
C.) 25 N backwards
D.) 35 N backwards
A roller coaster has a mass of 250 kg,
and is 50 meters above the ground, what
is the potential energy?
A roller coaster has a mass of 250 kg, and it is 50 meters above the ground, then the potential energy will be equal to 122.5 KJ.
What is Potential energy?Potential energy is a type of energy stored that depends on the interaction between various substances. A spring's energy rises when it is crushed or expanded. A steel ball has more energy stored if it is lifted just above the floor as contrasted to dropping to the ground. As raised, it can do greater labor.
Instead of being a property of specific entities or atoms, potential energy is a property of systems. For instance, a system made up of Earth and the raised ball has far more stored energy as they move apart.
In system components, where the configurations, or spatial arrangements, dictate the magnitude of the forces that apply against one another, potential energy arises.
From the data given in the question,
Mass, m = 250 kg
Height, h = 50 meters and,
g = 9.8 m/s²
[tex]Potential energy(PE)=mgh[/tex]
PE = 250 × 50 × 9.8
PE = 122500 J or,
PE = 122.5 KJ.
To know more about Potential energy:
https://brainly.com/question/24284560
#SPJ2
What is the momentum of a 200 kg truck travelling at 20 m/s?
Answer:
p = 4000 kg-m/s
Explanation:
Given that,
The mass of a truck, m = 200 kg
Speed of the truck, v = 20 m/s
We need to find the momentum of the truck. The formula for momentum is given by :
p = mv
so,
[tex]p=200\times 20\\\\p=4000\ kg-m/s[/tex]
So, the momentum of the truck is equal to 4000 kg-m/s.
Which of the following scenarios would result in an increase of kinetic
energy?*
A) An object at rest at a height of 10 meters
B) A car accelerating from 10 m/s to 20 m/s
C) A car coming to a stop
Answer:
B) A car accelerating from 10 m/s to 20 m/s
Explanation:
I explained this yesterday.
How do you find the velocity of a moving car?
Answer:
Velocity (v) is a vector quantity that measures displacement (or change in position, Δs) over the change in time (Δt), represented by the equation v = Δs/Δt. Speed (or rate, r) is a scalar quantity that measures the distance traveled (d) over the change in time (Δt), represented by the equation r = d/Δt.
Explanation:
hope this helps a little bit sorry if i got it wrong
A girl kicks a blue ball with a velocity of 20.0 m/s at 65.0o. How long is it in the air?
1.85s
1.92s
13.6s
3.69s
Explanation:
t = usin©/g
Where t is the time to reach the maximum height
Time spent in air is T = 2t
Hence, T = 2usin©/g
T = 2 x 20 x sin 65°/ 9.8
T = 3.69s
PLEASE HELP!!!!!!!!!!!!!!!!Match the label with the reason it might be important to the consumers.
1. country of origin
Kelli only buys vegetables grown
without pesticides.
Angie only buys foods made with
2. Organic Certification
sea salt to cut sodium intake.
3. dietary guideline
Nikki prefers to buy local products
to lessen her carbon footprint.
Answer:
1 is Nikki
2 is Kelli
3 is Angie
Explanation:
Hope this helps!
A car hits a wall with a force of 80 N and
has a mass of 4.5 kg. What was the
acceleration of the car?
What is the magnet field of a magnet
I have an unknown volume of gas at a pressure of 0.500 atm and a temperature of 325 K. If I raise the pressure to 1.20 atm, decrease the temperature to 320. K, and measure the final volume to be 48.0 liters, what was the initial volume of the gas?
Answer:
117
Explanation:
the formula is P1V1 over T1 is equals to P2V2 over T2
The acceleration due to gravity on the Moon's surface is known to be about one-sixth of the acceleration due to gravity on the Earth.
A rock falls under a gravitational force of 16.3 N on the moon.
Please help me figure out the mass of the rock.
Answer:
The mass of the rock is approximately 9.97 kg
Explanation:
From the question, we have;
The acceleration due to gravity on the Moon = (1/6) × The acceleration due to gravity on the Earth
The gravitational force under which a rock falls on the Moon = 16.3 N
The acceleration due to gravity on Earth, g ≈ 9.81 m/s²
Therefore, the acceleration due to gravity on the Moon, a = (1/6) × 9.81 m/s² ≈ 1.635 m/s²
The relationship between the force with which the rock falls and the acceleration of the motion resulting in the force is given by the following relationship;
F = m × a
Where;
F = The force = 16.3 N
m = The mass of the object acted on by the force = The mass of the rock
a = The acceleration of the motion of the object = 1.635 m/s²
From F = m × a, we have;
m = F/a
∴ m = 16.3 N/(1.635 m/s²) = 9.96941896 kg
The mass of the rock, m ≈ 9.97 kg.
A proton travels through uniform magnetic and electric fields. The magnetic field is in the negative x direction and has a magnitude of 2.48 mT. At one instant the velocity of the proton is in the positive y direction and has a magnitude of 1840 m/s. At that instant, what is the magnitude of the net force acting on the proton if the electric field is (a) in the positive z direction and has a magnitude of 5.19 V/m, (b) in the negative z direction and has a magnitude of 5.19 V/m, and (c) in the positive x direction and has a magnitude of 5.19 V/m
Answer:
a) F = 15.6 10⁻¹⁹ k^ N, b) F = -1 10⁻¹⁹ k^ N,
c) F = (8.3 i^ + 73 k^) 10⁻¹⁹ N
Explanation:
In this exercise we calculate the magnetic and electric force separately.
Let's start by calculating the magnetic force
F_m = q v x B
where bold letters indicate vectors, the modulus of this expression is
F_m = q v B
the direction is given by the right hand rule, where the thumb points in the direction of velocity, the fingers are extended in the direction of the magnetic field and the palm is in the directional ne force if the charge is positive
let's calculate the magnitude
F_m = 1.6 10⁻¹⁹ 1840 2.48 10⁻³
F_m = 7.3 10⁻¹⁹ N
we calculate the direction, the thumb is in the direction of + y,
fingers extended in the direction of -ax
the palm remains + z
therefore the magnetic force is in the direction of the positive side of the z axis
The electric force is
F_e = q E
give several possibilities for the electric field
a) electric field E = 5.19 V / m in the direction of + z
we calculate
F_e = 1.6 10⁻¹⁹ 5.19
F_e = 8.3 10⁻¹⁹ N
the total force is
F = F_m + F_e
F = (8.3 k ^ + 7.3 k ^) 10⁻¹⁹
F = 15.6 10⁻¹⁹ k^ N
b) in the -z direction
F_e = -8.3 10⁻¹⁹ k^ N
F = Fm + Fe
F = (-8.3 k ^ + 7.3 k ^) 10⁻¹⁹
F = -1 10⁻¹⁹ k^ N
c) in the + x direction
F_e = 8.3 10⁻¹⁹ i^ N
the total force is
F = (8.3 i^ + 73 k^) 10⁻¹⁹ N
Bill drives west at 20\, \dfrac{\text m}{\text s}20 s m 20, start fraction, start text, m, end text, divided by, start text, s, end text, end fraction, then slows to a stop at the red light. A graph of his velocity over time is shown below, where eastward is the positive velocity direction.
Answer:
This
Explanation:
Khan academy answer
Two balls are rolling using the same force. Which law explains why the bowling ball will roll a shorter distance than a soccer ball ?
1. Newton's 1st law
2. Newton's 2nd law
3. Newton's 3rd law
Answer:
newton's 2nd law
Explanation:
In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.
PLEASE ANSWER THIS ASAP I WILL MARK YOU THE BRAINLIEST The actual subject is Science but they dont have that as a option in pick a subject
Answer:
I believe it is D. Based on the point and it being Position vs. time I believe D makes the most sense. Sorry if I am wrong!
Explanation:
Answer:
25/30 = 0.83
Explanation:
I took this class
HELP pleaseee which nucleus completes the following equation?
Answer:
its D
Explanation:
i just got it correct on a. p. e. x. :)
Name three (3) organelles that are found in plant cells that are not commonly found in animal cells?
Answer:
cell wall, chloroplasts, plastids
Which best summarizes a concept related to the work-energy theorem?
- When work is positive, the environment does work on an object.
- When work is negative, the environment does work on an object.
- When work is positive, the kinetic energy in a system remains constant.
- When work is negative, the kinetic energy in a system remains constant.
this is times pls help!
Answer:
When work is positive, the environment does work on an object.
Explanation:
According to the work-energy theorem, the net work done by the forces on a body or an object is equal to the change produced in the kinetic energy of the body or an object.
The concept that summarizes a concept related to the work-energy theorem is that ''When work is positive, the environment does work on an object.''
Answer:
Your answer is A!
Have a good day!