Answer:
methanol because it is liquid at room temperature which means that it melts at a lower temperature
Silicon dioxide is a solid at room temperature and methanol is a liquid. Silicon dioxide has a higher melting point than methanol because silicon dioxide is solid, and with increasing temperature, it will melt.
What is a melting point?Melting point is that point or temperature at which the solid items are converted into liquid, and it changes their atoms and the atoms lose their compactness.
Here, two compounds are given, Silicon dioxide and methanol, the first one is solid at room temperature, so it will need more temperature to melt down and methanol is still liquid at room temperature, so its melting point is low.
Thus, methanol is a liquid while silicon dioxide is a solid at ambient temperature. Because silicon dioxide is a solid and melts at greater temperatures, it has a higher melting point than methanol.
To learn more about melting point, refer to the link:
https://brainly.com/question/20551307
#SPJ2
adjoa's gross salary for last month was ghs 4687.24. if ghs 421.78 was deducted from adjoa's salary pay,how much take home pay did adjoa earned this past month?
Since Ghs. 421.78 was deducted from Adjoa's salary pay, her take home pay is Ghs. 4265.46.
Given the following data:
Adjoa's gross salary = Ghs. 4687.24.Deduction = Ghs. 421.78Gross profit can be defined as the profit earned by a business after subtracting its cost of manufacturing and distributing goods from its total revenue (sales).
On a related note, gross salary is the amount of money earned by an individual before any deduction such as tax.
To find how much take home pay Adjoa earned this past month:
[tex]Take\;home = Gross\;salary - deduction\\\\Take\;home = 4687.24 - 421.78[/tex]
Take home = Ghs. 4265.46.
Read more: https://brainly.com/question/25273589
What is the formula to calculate heat energy required to raise the temperature of any substance?
Answer:
[tex]\huge \dag \sf{Specific \: Heat}[/tex]
Specific Heat is the quantity of heat required to raise the temperature of one gram of a substance by one Celsius degree.Specific heat is a characteristic property that measures how much energy it takes to raise the temperature 1 gram of a material 1°C.
[tex]\huge\bold\red{Formula}[/tex]
mass x specific heat x change of temperature
Or,
c = Q / (mΔT)
[tex]\Large\textsf{Hope \: It \: Helped}[/tex]
[tex]{\blue{Formula}}[/tex]
The formula for specific heat is the amount of heat absorbed or released = mass x specific heat x change in temperature.
[tex]{\green{explanation}}[/tex]
Specific heat is the amount of heat required to raise one gram of any substance one degree Celsius or Kelvin.
How would you make the following compounds from N-benzylbenzamide?
a)dibenzylamine
b)benzoic acid
c)benzyl alcohol
Answer:
B.
Explanation:
a
A 49.8 mL sample of gas in a cylinder is warmed
from 18°C to 83 °C.
what is it’s volume at the final temperature? (Assume constant pressure)
Using Charles law
[tex]\\ \sf\longmapsto V_1T_2=V_2T_1[/tex]
[tex]\\ \sf\longmapsto V_2=V_1T_2\div T_1[/tex]
[tex]\\ \sf\longmapsto V_2=\dfrac{49.8(356)}{291}[/tex]
[tex]\\ \sf\longmapsto V_2=\dfrac{17728.8}{291}[/tex]
[tex]\\ \sf\longmapsto V_2=60.9mL[/tex]
What happens when the two atoms are fairly close?
what is the resonance structure of xef4
Answer:
The Lewis structure for XeF4 has a total of 36 valence electrons. When we are done adding valence electrons we check each atom to see if it has an octet (full outer shell). We also need to check to make sure we only used the number of available valence electrons we calculated earlier (no more, no less).
Explanation:
How many protons, neutrons, and electrons are there in a neutral atom of 60 Co (cobalt- 60 )?
Cobalt-60 is comprised of 27 protons, 33 neutrons, and 27 electrons. Nuclear reactors are used to artificially create it.
What is cobalt- 60?A radioactive isotope containing cobalt with something like a half-life of 5.2713 centuries is called cobalt-60 (60Co). Nuclear reactors are used to artificially create it. Neutron irradiation of bulk material of the monoisotopic as well as mononuclidic cobalt element 59 Co is necessary for deliberate industrial manufacture.
The accidentally generated 60 Co in the latter instance (inside the absence of additional cobalt) is mostly the product of many phases involving neutron activation on iron isotopes inside the reactor. Cobalt-60 is comprised of 27 protons, 33 neutrons, and 27 electrons.
Therefore, cobalt-60 is comprised of 27 protons, 33 neutrons, and 27 electrons.
To learn more about cobalt- 60, here:
https://brainly.com/question/30518617
#SPJ2
It’s a science question
Why can't more than one variable be changed during an experiment?
O You need to make sure your results match your hypothesis.
O Changing two or more variables makes it difficult to find a cause and effect relationship.
O Change two or more variables would take longer.
O Changing two or more variables would make the experiment more precise.
Answer:
Changing two or more variables makes it difficult to find a cause and effect relationship.
classify each of these reactions pb(no3)2+nicl2=pbcl2+ni(no3)2
The reaction Pb(NO3)2(aq) + NiCl2(aq)---------> PbCl2(s) + Ni(NO3)2(aq) is a precipitation reaction.
A chemical reaction is said to occur when two or more substances are combined to produce new substances. Chemical reactions are classified based on the kind of change taking place in the reaction.
In the reaction;
Pb(NO3)2(aq) + NiCl2(aq)---------> PbCl2(s) + Ni(NO3)2(aq)
We can see that a solid is formed when lead II nitrate reacts with nickel II chloride. This is a precipitation reaction.
Learn more: https://brainly.com/question/5624100
What scientific term is a well-tested explanation for a set of observations or experimental results?
law
theory
method
conclusion
Answer:
b) theory
Explanation:
Answer:
theory or, conclusion is the answer
If you take 35 mL of solution from (#2c) and add 0.225 L of water what is the concentration of the resulting solution in (% v/v)? (hint: you must determine the final volume first)
HELP
We want to find the concentration of the resulting solution of mixing 35mL of a given solution and 0.225 L of water.
We will find that the concentration is 13.5%.
First, we need to write both of these in the same units.
We know that:
1000 mL = 1L
Then:
35 mL = 0.035 L
So when we mix the solution and the water we end with a total volume of:
V = 0.035L + 0.225L = 0.260L
The concentration of solution will be equal to the quotient between the volume of solution we used (0.035 L) and the total volume of the mixture (0.260L)
We will get:
Concentration = (0.035L)/(0.260L) = 0.135
Now to write it as a percentage, we only need to multiply this by 100%.
0.135*100% = 13.5%
This means that the mixture has a concentration of the 13.5%.
If you want to learn more, you can read:
https://brainly.com/question/202460
eg
How many Mg atoms are there in 0.764 moles of Mg?
atoms
Answer:
1.135986935e+39
Answer:
[tex]\boxed {\boxed {\sf 4.60 \times 10^{23} \ atoms \ Mg}}[/tex]
Explanation:
We are asked to find how many atoms of magnesium are in 0.764 moles of magnesium.
We convert moles to atoms using Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this case, the particles are atoms of magnesium. So, there are 6.022 × 10²³ atoms of magnesium in 1 mole of magnesium.
Convert using dimensional analysis and set up a conversion factor using Avogadro's Number.
[tex]\frac{6.022 \times 10^{23} \ atoms \ Mg}{1 \ mol \ Mg}[/tex]
We are converting 0.764 moles of magnesium to atoms, so we multiply by this value.
[tex]0.764 \ mol \ Mg *\frac{6.022 \times 10^{23} \ atoms \ Mg}{1 \ mol \ Mg}[/tex]
The units of moles of magnesium cancel.
[tex]0.764 *\frac{6.022 \times 10^{23} \ atoms \ Mg}{1 }[/tex]
[tex]0.764 *6.022 \times 10^{23} \ atoms \ Mg[/tex]
[tex]4.600808 \times 10^{23} \ atoms \ Mg[/tex]
The original value of moles (0.764) has 3 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 0 in the thousandth place tells us to leave the 0 in the hundredth place.
[tex]4.60 \times 10^{23} \ atoms \ Mg[/tex]
0.764 moles of magnesium contains approximately 4.60 × 10²³ atoms of magnesium.
Hi. Please tell me When you test starch with Barfoed’s reagent, what would be the answer, positive or negative? Explain the answer by giving reasons and structures.
Write the full electron configuration for a Ca+ ion.
Answer:
[Ar] 4s²
Explanation:
The full electron configuration for the Ca+ ion is:
1s² 2s² 2p⁶ 3s² 3p⁶.
How to determine the electron configuration for the Ca+ ionTo determine the full electron configuration for a Ca+ ion, we need to remove one electron from the neutral calcium atom (Ca). The neutral calcium atom has the electron configuration: 1s² 2s² 2p⁶ 3s² 3p⁶ 4s².
When Ca loses one electron to form the Ca+ ion, the electron removed comes from the highest energy level, which is the 4s orbital.
Therefore, the full electron configuration for the Ca+ ion is:
1s² 2s² 2p⁶ 3s² 3p⁶.
Learn more about electron configuration at https://brainly.com/question/26084288
#SPJ6
Which one is location 3 in___
Arm
Center
I CANT DELETE THE ANSWER, SO HERE.
1. ¿Cuál de los factores se deben emplear para convertir: a. ¿Número de moles de cloro en número de moles de NaCl? b. Moles de sodio a moles de cloro C. Moles de cloro a moles de sodio. 2 Na + CI, - 2 Naci
Ayudaaa
Answer:
Número de moles de cloro en número de moles de NaCl
Explanation:
espero que si sea la correcta
Use the bond enthalpy data given to estimate the heat released when 6.50 g of
nitrogen gas reacts with excess hydrogen gas to form ammonia at 25C.
Answer:
24.9
Explanation:
-
how many number of atoms are present in 0.55moles of calcium
Explanation:
The warmer and less dense air near the ground rises during the day pulling more air through the valley floor. This gentle upslope wind known as a valley breeze. ... The cooler and denser air at higher elevations flows back down the slopes of the mountain and into the valley. This is called a mountain breeze.29-May-2017

https://www.weathernationtv.com › ...
Mountain and Valley Breezes - WeatherNation
Feedback
About featured snippets
Mountain breeze and valley breeze
Images










View all
Description
A mountain breeze and a valley breeze are two related, localized winds that occur one after the other on a daily cycle. They are not the same as anabatic and katabatic winds, which are larger and stronger. These winds are opposite from each other. Wikipedia
5._____is and example of an element and __is an example of compound
A. MIXTURES
B. CARBON
C. PURE
D. CARBON DIOXIDE
PLS ANSWER IT
ITS SCIENCE
Answer:
Carbon Dioxide is and example of an element and Carbon is an example of compound
helppp! ill give brainliest
highlight main approaches that could be used to investigate the waterer Quality.
Answer:
Seven methods were used to assess water quality in the river system. These methods included single-factor assessment, water quality grading, comprehensive pollution index, the Nemerow pollution index, principle component analysis, fuzzy comprehensive evaluation, and comprehensive water quality identification index.
What differences between snow and sand
Answer:
difference is the temperature at which they melt. Snow melts at 0°C, whereas sand melts at about 1600°C! The temperature at which something melts is its melting point.Acetone [(CH3)2C=O], a simple ketone is commonly used to make products like nail polish remover and paint remover. Draw a picture showing the orbitals involved in the and bonds including its lone pairs.
Carbon and oxygen atoms in (CH3)2C=O form sigma and pi bonds. The pi bonds are formed using unhybridized p orbitals.
Acetone (CH3)2C=O contains the carbonyl group (C=O). Carbon is bonded to oxygen via a double bond as shown in the orbital structure. The carbon atom is also bonded to two methyl groups.
The central carbon atom is sp2 hybridized as well as the oxygen atom in acetone. The pi bond is formed by the overlap of unhybridized p orbitals on both carbon and oxygen atoms. The sigma bonds are formed using the sp2 hybridized carbon atoms on carbon and oxygen.
Learn more: https://brainly.com/question/14569599
What part of the scientific method involves drawing inferences about experimental results and determining if the collected data support the original hypothesis?
Asking a question
Conducting research
Constructing a hypothesis
Drawing conclusions
Answer:
Drawing conclusions
Explanation:
List the steps in naming covalent compounds.
1. Name the non-metal furthest to the left on the periodic table by its elemental name.
2. Name the other non-metal by its elemental name and an -ide ending.
3. Use the prefixes mono-, di-, tri-.... to indicate the number of that element in the molecule.
4. If mono is the first prefix, it is understood and not written
Answer:
Rules for naming simple covalent compounds:
1. Name the non-metal furthest to the left on the periodic table by its elemental name.
2. Name the other non-metal by its elemental name and an -ide ending.
3. Use the prefixes mono-, di-, tri-.... to indicate the number of that element in the molecule.
4. If mono is the first prefix, it is understood and not written
Examples:
N2O4 is called dinitrogen monoxideCO2 is called carbon dioxideCO is called carbon monoxideN2O is called dinitrogen monoxide. (It is also called nitrous oxide but that is another naming scheme.)CCl4 is called carbon tetrachlorideHere is a chart of those prefixes:
1 - mono
2 - di
3 - tri
4 - tetra
5 - penta
6 - hexa
7 - hepta
8 - octa
9 - nona
10 - deca
Biểu thức định luật Raoul là?
Answer: Định luật Raoult là một định luật hóa học vật lý, với ý nghĩa trong nhiệt động lực học. Được thành lập bởi nhà hóa học người Pháp François-Marie Raoult vào năm 1887, nó nói rằng áp suất một phần của mỗi thành phần của một hỗn hợp chất lỏng lý tưởng bằng với áp suất hơi của thành phần tinh khiết nhân với phần nốt ruồi của nó trong hỗn hợp. Kết quả là, việc giảm áp suất hơi tương đối của dung dịch pha loãng của chất tan không lây bằng với phần nốt ruồi của chất tan trong dung dịch.
Explanation: hope this helps :)
Multiple Choice Question
What do molecules in a bowl of hot soup do?
A. Disperse
B. Evaporate
C. Vibrate
D. Sublimate
Submit
Answer:
Explanation:
i would say not d im not fully sure but id say c
When molecules present in a bowl of hot soup then they do vibration due to high kinetic energy.
What are molecules?Molecules are the example of chain substance, which can be prepared by the addition of two or more than 2 atoms of same or different nature.
In a hot soup bowl, kinetic energy of the molecules present in that soup increases due to which they move with higher velocity and also shows vibration in their mean position.
Hence, option (C) is correct i.e. vibrate.
To know more about kinetic energy, visit the below link:
https://brainly.com/question/19555619
How do ionic bonds differ from covalent bonds?
Determine whether the bonds in CCl4 and N2 are polar or non-polar. If the bond is polar, assign the partial positive and negative charges. Electronegativity values: C = 2.5, Cl= 3.0, N= 3.0
Refer to the attachment
According to the molecular geometry, bonds in carbon tetrachloride are polar and that in nitrogen are non polar.
What is molecular geometry?Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.
It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.
They provide information about geometry by taking into considerations the vibrational and rotational absorbance of a substance.Neutron and electron diffraction techniques provide information about the distance between nuclei and electron density.
Learn more about molecular geometry,here:
https://brainly.com/question/7558603
#SPJ2
what is the mass in grams of 0.250 mol of the common antacid colcium carbonate?
A. 25.0 g
B. 2.50 ×10-3
C. 4.00×102g
D. 4.00×1021g
E. 2.00×10-4 g
Answer:
b
Explanation:
i just had the same question