Someone pls help me I will make you brain

Answer:

absolutely correct....................

Answer: protons and electrons.

Explanation:

There are 1.16x10²² sulfide ions (S²⁻) in 15 dg of sodium sulfide (Na₂S).

The equation for sodium sulfide is the following:

Na₂S → 2Na⁺ + S²⁻  (1)

So from equation (1), we can see that in 1 mol of sodium sulfide we have 1 mol of sulfide ions and 2 moles of sodium ions.

First, let's find the number of moles of Na₂S

[tex] n_{Na_{2}S} = \frac{m_{Na_{2}S}}{M_{Na_{2}S}} [/tex] (2)

Where:

[tex]m_{Na_{2}S}[/tex]: is the mass of Na₂S = 15 dg = 1.5 g    

[tex]M_{Na_{2}S}[/tex]: is the molar mass of Na₂S = 78.0452 g/mol

The number of moles of Na₂S is (eq 2):

[tex] n_{Na_{2}S} = \frac{1.5 g}{78.0452 g/mol} = 0.0192 \:mol [/tex]

We can find the number of ions of S²⁻ with Avogadro's number, knowing that the number of moles of Na₂S is equal to the number of moles of S²⁻ (eq 1).  

[tex] ions_{S^{2-}} = \frac{6.022 \cdot 10^{23} \:ions}{1\:mol}*0.0192 \:mol = 1.16 \cdot 10^{22} \:ions [/tex]

Therefore, there are 1.16x10²² sulfide ions in 15 dg of sodium sulfide.

Find more about Avogadro's number here:

I hope it helps you!

Rigor mortis is the stiffening of the body after death. After death, the body begins to get cold. From about two to six hours after death, the muscles start to stiffen, probably because the actin and myosin filaments of the muscle slide into each other. The rigor mortis starts at the eyelids, jaw and neck and then slowly spreads to all parts of the body within six hours.

Contrary to popular belief, rigor mortis will occur more quickly in high ambient temperatures than in cold conditions. This is because the underlying chemical reaction occurs faster at higher temperatures.  

Learn more in https://brainly.com/question/14139041

Answer:

Mg + 2H2O → Mg(OH)2 + H2, is normally sluggish, but it becomes reasonably rapid when a milled composite of powdered magnesium metal and powdered iron (1−10 mol %) is used with sodium chloride solutions.

Answer:

Fluroine

Explanation:

Answer:

Fluorine

Explanation:

Nitrogen atomic radius: 155 pm

Oxygen atomic radius: 152 pm

Fluorine atomic radius: 147 pm

Carbon atomic radius: 170 pm

Therefore, fluorine has the smallest atomic radius.

MgS → Mg²⁺ + S²⁻

S²⁻ is known as the sulfide ion. That makes MgS Magnesium Sulfide.

For consideration:

magnesium sulfide MgS

magnesium sulfite MgSO₃

magnesium sulfate MgSO₄

magnesium sulfur  Mg & S

Magnesium sulfide is an inorganic compound with the formula MgS.

Magnesium sulfide (MgS) is an concerning ancient culture compound made by the consolidation of magnesium (Mg) cations and sulfide (S2-) anions. It is calm of individual magnesium ion (Mg2+) and individual sulfide ion (S2-).

In the formation of magnesium sulfide, magnesium drops two electrons to solve a constant eight of something configuration, making a absolutely loaded magnesium ion (Mg2+). Sulfur, in another way, gains two electrons to complete its outer energized matter structure, happening in a negatively loaded sulfide ion (S2-).

Read more about  Magnesium sulfide here:

https://brainly.com/question/2293543

#SPJ6

Answer:

Below

Explanation:

The reaction is a Substitution SN1 mechanism

The mass of  chlorine gas produced by 14.5 grams of sodium chloride is 10.42 g.

The mass of  chlorine gas produced by 14.5 grams of sodium chloride is 8.81 g.

The given parameters;

In the reaction above, we can deduce the following;

molecular mass of 2Nacl = 2(58.44) = 116.88 g

molecular mass of 2NaF = 2(42) = 84 g

molecular mass of  Cl2 = 71 g

The mass of sodium fluoride produced by 14.5 grams of sodium chloride is calculated as follows;

116.88 g of NaCl --------------- 84 g of NaF

14.5 g of NaCl -------------------  ?

[tex]= \frac{84 \times 14.5}{116.88} \\\\= 10.42 \ g[/tex]

The mass of  chlorine gas produced by 14.5 grams of sodium chloride is calculated as follows;

116.88 g of NaCl --------------- 71 g of Cl2

14.5 g of NaCl ------------------- ?

[tex]= \frac{14.5 \times 71}{116.88} \\\\= 8.81 \ g[/tex]

Learn more here:https://brainly.com/question/8470145

Answer:

true

Explanation:

because there is love in the universe and we converse in each others mind soul brain time stone

Answer:

The main component are electrons.

A chemical bond is any attractive interaction that keeps atoms short. This interaction can be directional as the bond between two atoms within a molecule, or non-directional as the electrostatic interaction that keeps the ions of an ion crystal in contact. It can be strong like the two previous examples, or weak as van der Waals interactions that are dipolar in nature.

Many models exist to describe these interactions. For example, the chemical bond between two atoms within a molecule can be described with the Lewis model or with a quantum model, like the theory of molecular orbitals. In both cases, the origin of the interaction is a sharing of electrons between the two partner atoms of the chemical bond.

There are three types of chemical bonds: single bonds, double bonds, and triple bonds. Indeed, the type of chemical bond depends on the number of electrons shared between the bound atoms:

* Simple bonds have 2 shared electrons.

* Double bonds have 4 shared electrons.

* Triple bonds have 6 shared electrons.

This number of electrons shared between the atoms depends on the electronic structure of these atoms and thus on the rules of the byte and the duet.

Answer:

People are getting richer and richer as technology advances, this may make it so that some people are getting treated unfairly. Signs of little money may support the reason that you are not getting the help you need; this means that health problems would arise more, resulting in an unfair lifestyle.

Answer:

Protons have a positive charge. Electrons have a negative charge. The charge on the proton and electron are exactly the same size but opposite. Since opposite charges attract, protons and electrons attract each other.

Explanation:

d- Helium in air me air is made up of various gases

Answer:

Explanation:

Name Number of Carbon Atoms Molecular Formula

methane  1 CH4

ethane 2 C2H6

propane 3 C3H8

butane 4 C4H10

Answer:

To organize a new nation and create order and for financial gain.

Answer:

C the person above is wrong its

Explanation:

to organize themselves, guarantee a long life for the colony, and achieve their goals in setting up the colony

Explanation:

Answer:

on the other hand

Explanation:

I think its correct

Answer:

Photosynthesis

Explanation:

Photosynthesis is the process in which plants collect radiant energy (from the Sun) and transform it into chemical energy.

Answer:

Photosynthesis is the process in which plants collect radiant energy (from the Sun) and transform it into chemical energy.

Explanation:

BECAUSE I SAID, btw its right i promise

The concentration of the hydroxide ions, OH¯ in 250 mL of the solution containing the maximum amount of dissolved calcium hydroxide is 0.01728 M

We'll begin by calculating the number of mole of in 0.16 g of Ca(OH)₂. This can be obtained as follow:

Mass of Ca(OH)₂ = 0.16 g

Molar mass of Ca(OH)₂ = 40 + 2[16 + 1] = 74 g/mol

Mole = mass / molar mass

Mole of Ca(OH)₂ = 0.16 / 74

Mole of Ca(OH)₂ = 0.00216 mole

Volume = 100 mL = 100 / 1000 = 0.1 L

Molarity = mole / Volume

Molarity of Ca(OH)₂ = 0.00216 / 0.1

Volume of stock solution (V₁) = 100 mL

Molarity of stock solution (M₁) = 0.0216 M

Volume of diluted solution (V₂) = 250 mL

0.0216 × 100 = M₂ × 250

2.16 = M₂ × 250

Divide both side by 250

M₂ = 2.16 / 250

Thus, the molarity of the diluted solution is 0.00864 M

Ca(OH)₂(aq) —> Ca²⁺(aq) + 2OH¯(aq)

From the balanced equation above,

1 mole of Ca(OH)₂ contains 2 moles of OH¯

Therefore,

0.00864 M Ca(OH)₂ will contain =  2 × 0.00864 = 0.01728 M OH¯

Thus, the concentration of the hydroxide ions, OH¯ in 250 mL of the solution containing the maximum amount of dissolved calcium hydroxide is 0.01728 M

Learn more: https://brainly.com/question/11471182

Answer:

Explanation:

Hi! can you add the choices.

Many nitrogen and carbon atoms can be found in the structure of a heterocyclic molecule called xanthine, which is present in many biological systems.

The development of a sigma bond between these atoms is an essential component of its binding. A special example is the sigma bond between the nitrogen atom and the neighboring carbon atom. In the context of this sigma bond, the hybridization state of nitrogen can be either [tex]\rm sp^2[/tex]or [tex]\rm sp^3[/tex], and the hybridization state of carbon can be [tex]\rm sp^3[/tex]. A sigma bond is formed when the hybrid orbitals of carbon and nitrogen, which are each [tex]\rm sp^2[/tex] hybridized and [tex]\rm sp^3[/tex] hybridized, overlap. A strong covalent bond can develop when the [tex]\rm sp^2[/tex] hybrid orbitals of nitrogen and carbon line up. This allows electron sharing.

Learn more about sigma bond, here:

https://brainly.com/question/31238729

#SPJ12

Answer: 1 and 2

i think

Explanation:

Explanation:

Atoms join together to form molecules. A water molecule has three atoms: two hydrogen (H) atoms and one oxygen (O) atom

Carbon dioxide is a colorless and non-flammable gas at normal temperature and pressure. Although much less abundant than nitrogen and oxygen in Earth's atmosphere, carbon dioxide is an important constituent of our planet's air. A molecule of carbon dioxide (CO2) is made up of one carbon atom and two oxygen atoms.

I hope you got it..... ♥️

Answer:

1) 1Atoms join together to form molecules. A water molecule has three atoms: two hydrogen (H) atoms and one oxygen (O) atom. **

2) Although much less abundant than nitrogen and oxygen in Earth's atmosphere, carbon dioxide is an important constituent of our planet's air. A molecule of carbon dioxide (CO2) is made up of one carbon atom and two oxygen atoms. Carbon dioxide is an important greenhouse gas that helps to trap heat in our atmosphere. ^^

Answer:

D

Explanation:

Heterogeneous mixture is a mixture of non-uniform composition & in which the components can be easily identified

Answer:

Soil

Explanation:

Soil is made up of many things (therefore it's not pure) and does not appear to be uniform; it does not look the same throughout. Therefore it is heterogeneous.

Answer:

flammability, toxicity, acidity, reactivity are some examples.

sorry you left out your options.

Answer:

Where are the options

Explanation:

Can you be a little more specific about your question?

There are many different ways that cells can connect to each other. The three main ways for cells to connect with each other are: gap junctions, tight junctions, and desmosomes. These types of junctions have different purposes, and are found in different places.