Suppose that a family wants to fence in an area of their yard for a vegetable garden to keep out deer. One side is already fenced from the neighbor's pro X x Part: 0/2 Part 1 of 2 (a) If the family has enough money to buy 140 ft of fencing, what dimensions would produce the maximum area for the garden? The dimensions that would produce the maximum area for the garden are 70 ft by 35 ft. $ Part: 1 / 2 Part 2 of 2 (b) What is the maximum area? The maximum area of the garden is ft? Х $

Answer:

Yes, by AA, since angle DEF is congruent to HEJ (vertical angles are congruent), and angle DFE is congruent to HJE.

So triangle DEF is similar to triangle HEJ.

The measurement of angle A to the nearest tenth is equal to 40.8 degrees.

In order to determine the magnitude of tan A, we would apply the law of tangent because the given side lengths represent the adjacent side and opposite side of a right-angled triangle.

tan(θ) = Opp/Adj

Where:

Based on the information provided in the image, we can logically deduce the following parameters:

By substituting the parameters into the law of tangent formula, we have the following;

TanA = 19/22

A = tan⁻¹(0.8636)

A = 40.8 degrees.

Read more on right-angled triangle here: brainly.com/question/2223099

#SPJ1

The given series Σ (n+1)/(n² + 5n) from n=1 to infinity is divergent and the correct option is option A.

We have to determine if the following series converges or diverges: Σ (n+1)/(n² + 5n) from n=1 to infinity.

To determine the convergence or divergence of the series, we can use the comparison test. We can compare the given series to another series with known convergence properties.

Let's compare it to the series Σ 1/n.

For all n > 1, we have (n+1)/(n² + 5n) < 1/n since n² + 5n > n.

Now, we know that the series Σ 1/n, also known as the harmonic series, is a divergent series.

Since (n+1)/(n² + 5n) < 1/n for all n > 1, and the series Σ 1/n diverges, the given series also diverges by the comparison test.

The correct answer is:
A. Since (n+1)/(n² + 5n) < 1/n for all n > 1 and the series Σ 1/n diverges, the given series diverges by the comparison test.

Learn more about series:

https://brainly.com/question/24643676

#SPJ11

Answer:

Step-by-step explanation: every 30 minutes we add 16 to the level

Answer:for 10:am youd put "started" or "0" for time and "24 gallons of water" at 10:30am put "30 minutes" for time because from 10 to 10:30 is 30 minutes. For amount of water put 40 gallons. For the last one put the tine as "1:00pm". Put the time spent as "2 hours and 30 min" and gallons of water put 120

Answer:

Step-by-step explanation:

80 is the greatest common factor .

What is a factor in math?

A number or algebraic expression that divides another evenly, i.e. without leaving a residue, is referred to in mathematics as a factor. For instance, the precise values of 12 3 = 4 and 12 6 = 2 show that 3 and 6 are factors of 12. 1, 2, 4, and 12 are additional factors of 12.

the prime factorization of 400

400 = 2 × 2 × 2 × 2 × 5 × 5

the prime factorization of 560

560 = 2 × 2 × 2 × 2 × 5 × 7

the GCF, multiply all the prime factors common to both numbers:

Therefore, GCF = 2 × 2 × 2 × 2 × 5

GCF = 80

Learn more about factor

brainly.com/question/29114178

#SPJ1

Answer: At x = -0.75

Step-by-step explanation:

Find the center of mass by plugging into the equation.

(3.0 * -7.0 + 5.0 * 3.0) / (3.0 + 5.0) = -0.75

6 choc bars and 2 iceblocks would cost a total of $28

Let's assign a variable to the cost of one chocolate bar, say "c", and a variable to the cost of one ice block, say "i". Then we can set up a system of equations based on the information given:

3c + 4i = 20

4c + 3i = 22

Using a graphing tool, we have

c = 4 and i = 2

So the cost of one chocolate bar is $4 and the cost of one ice block is $2

Finally, we can calculate the cost of 6 chocolate bars and 2 ice blocks:

6c + 2i = 6 * 4 + 2 * 2

6c + 2i = 28

Hence, the cost is $28

Read more about expression at

https://brainly.com/question/15775046

#SPJ1

A 90% confidence interval for the mean sale price in San Luis Obispo County is $635.6 to $802.4.

Using the given data, we can calculate the sample mean and sample standard deviation as follows:

Sample mean (x) = (662 + 609 + 834 + 702 + 741 + 766) / 6 = 719

Sample standard deviation (s) = √[(∑(xi - x)²) / (n - 1)] = √[((662 - 719)² + (609 - 719)² + (834 - 719)² + (702 - 719)² + (741 - 719)² + (766 - 719)²) / (6 - 1)] = 79.44

The degrees of freedom (df) for a 90% confidence interval with n = 6 is df = n - 1 = 5.

The t-value for a 90% confidence interval with df = 5 is found using a t-table or a calculator and is approximately 2.571.

Using the formula for a confidence interval for the population mean with a known standard deviation, we have:

Lower limit = x - (t-value) * (s / √n) = 719 - (2.571) * (79.44 /√6) ≈ 635.6

Upper limit = x + (t-value) * (s / √n) = 719 + (2.571) * (79.44/ √6) ≈ 802.4

Therefore, a 90% confidence interval for the mean sale price in San Luis Obispo County is $635.6 to $802.4.

Read more about confidence interval at

https://brainly.com/question/17019045

#SPJ1

The trigonometric ratios are given as follows:

The three trigonometric ratios are the sine, the cosine and the tangent, and they are defined as follows:

5 is the hypotenuse length, while for angle A, we have that the sides are given as follows:

Hence the ratios are given as follows:

For angle B, we have that 4 is now the adjacent side, while 3 is the opposite side, hence:

More can be learned about trigonometric ratios at brainly.com/question/24349828

#SPJ1

Answer: the answer is f(3)=29

Step-by-step explanation:

The number of possible passwords for a length of 5 to 7 characters, where each character can be any alphanumeric value, is 218,340,105,584. If each password must contain at least one digit, then the number of possible passwords is 577,311,447,520.

There are 62 possible alphanumeric characters (26 uppercase letters + 26 lowercase letters + 10 digits). Therefore, the total number of possible passwords for a length of 5 to 7 characters is:

Total number of passwords = 62^5 + 62^6 + 62^7 = 218,340,105,584,896

If each password must contain at least one digit, then there are 10 choices for the first character, and 62 choices for each of the remaining four to six characters. Therefore, the total number of possible passwords is:

Total number of passwords = 10 * 62^4 + 10 * 62^5 + 10 * 62^6 = 577,311,447,520.

To know more about password, here

brainly.com/question/15577168

#SPJ4

The type of quadrilaterals, based on the description of the diagonals are;

a) Isosceles trapezoid

b) Square or rhombus

c) Kite or parallelogram

A quadrilateral is a four sided polygon.

The properties of the quadrilateral are;

a) The diagonals are congruent but are not perpendicular

b) The diagonals are congruent and perpendicular bisectors

c) One diagonal bisects an angle and the other diagonal

The type of quadrilaterals are;

a) Whereby the diagonals are congruent and the diagonals are not perpendicular, indicates that a possible quadrilateral is an isosceles trapezoid

b) The quadrilaterals with congruent and perpendicular diagonals indicates that the possible quadrilaterals are a square or a rhombus

c) A quadrilateral that bisects an angle and one diagonal indicates that the quadrilateral is a parallelogram or kite

Learn more on the types of quadrilaterals here: https://brainly.com/question/30459573

#SPJ1

The third option {(–5, 1), (–2, 0), (–1, 1), (2, 4), (6, 3)} is the only function, as every input (x value) has a unique output (y value).

To determine if a relation is a function, we have to check if each input (represented by x) has exactly one output (y). If any x value has more than one corresponding y value, then it is not a function.

https://brainly.com/question/30721594

#SPJ2

The slope of this function is approximately 4518

A linear function would best fit the data because as x increases, the y values ​​change values by 4518.

y = mx + c

Linear equation with two variables, when graphed on the cartesian plane with axes of those variables, give a straight line.

the linear function would best fit the data because as x increases, the y values ​​change values by 4518.

The slope of this  function is approximately 4518

Slope = change in y values /  change in x values

        =( 27520.99-23002.99)/(2-1)

        = 4518/1

       = 4518

Read more about linear functions here:

https://brainly.com/question/15602982

#SPJ1

Answer:

Step-by-step explanation:

22

The height of the pyramid is 11 units.

What is a triangular pyramid?

A tetrahedron is a polyhedron in geometry that has four triangular faces, six straight edges, and four vertex corners. It is often referred to as a triangle pyramid. The simplest regular convex polyhedron is the tetrahedron.

Here, we have

Given: The volume of a triangular pyramid is 99 units³. If the base and height of the triangle that forms its base are 9 units and 6 units respectively.

We have to find the height of the pyramid.

The area of the triangular base = (9×6)/2

= 54/2 units

= 27units

The volume of the pyramid with a triangular base = 27units³ = area of base × height/3, or the height of the pyramid.

= 99×3/27

= 11 units

Hence,  the height of the pyramid is 11 units.

To learn more about the triangular pyramid from the given link

https://brainly.com/question/31193677

#SPJ1

The period of function is approximately 0.6465 days, which means that the pattern of daylight hours repeats approximately every 0.6465 days, or about every 15.55 hours.

A periodic function is a function that repeats its values in a regular pattern over a specified interval or set of input values.

More specifically, a function f(x) is said to be periodic with period P if, for all values of x in the domain of f(x), we have:

f(x + P) = f(x)

The period of a periodic function is the distance along the x-axis between two consecutive peaks or troughs of the graph of the function. For the given function f(x)=2.95sin(2π365x)+12.21, the coefficient of x in the argument of the sine function is 2π365, which represents the frequency of the oscillation.

The period P of a sine function with frequency f is given by:

P = 1/f

Therefore, for the given function, the period is:

P = 1/f = 1/(2π365) ≈ 0.00177 years

However, since the function is modeling the number of hours of daylight, it is more convenient to express the period in terms of days. One year has 365 days, so we can convert the period to days by multiplying it by 365:

P = 0.00177 × 365 ≈ 0.6465 days

To know more about period of function visit:

https://brainly.com/question/14325171

#SPJ1

The probability of rolling an odd number the first time and a number greater than 3 the second time is 1/4

The probability of rolling an odd number on a single die is 3/6 or 1/2, since there are three odd numbers (1, 3, and 5) out of six possible outcomes.

The probability of rolling a number greater than 3 on a single die is 3/6 or 1/2, since there are three numbers greater than 3 (4, 5, and 6) out of six possible outcomes.

To find the probability of both events happening together (rolling an odd number first and a number greater than 3 second), we need to multiply their individual probabilities:

P(odd number first and number > 3 second) = P(odd number first) * P(number > 3 second)

P(odd number first and number > 3 second) = (1/2) * (1/2) = 1/4

Therefore, the probability is 1/4.

Read more about probability at

https://brainly.com/question/251701

#SPJ1

Answer:

Cevap C, yani 70 kişi olarak verilmiştir. Ankete katılan 200 kişinin yüzde 35'i, 200 x 0.35 = 70 kişiye denk gelir.

Step-by-step explanation:

Answer:

Using this formula, we can calculate the diagonal measure of the TV as follows: (this is the Phytagoras theorem)

diagonal^2 = height^2 + width^2

diagonal^2 = 14^2 + 24^2

diagonal^2 = 196 + 576

diagonal^2 = 772

diagonal ≈ 27.8 inches

Therefore, this TV's best diagonal measure, in inches, is option B, 28 inches (rounded to the nearest inch).

The lift ratio indicates a strong association between the two websites.

Association rule mining is a data mining technique used to find patterns in datasets. It is particularly useful for finding relationships between variables in large datasets. In this case, the dataset consists of browser histories, and we are interested in finding association rules between the websites that were visited.

The two main measures used in association rule mining are support and confidence. Support is the proportion of transactions that contain both the antecedent and the consequent of a rule, while confidence is the proportion of transactions containing the antecedent that also contain the consequent. Lift ratio is another measure used to evaluate the strength of an association rule. It is the ratio of the observed support to the expected support, assuming the antecedent and the consequent are independent.

To generate a list of association rules, we can use an algorithm like Apriori. The Apriori algorithm starts by finding frequent itemsets, or sets of items that occur together in a sufficient number of transactions. We can then use these frequent itemsets to generate association rules by dividing them into antecedents and consequents and calculating the support and confidence of each rule.

Based on the top 14 rules, we can identify the three web sites that appear in the association rules with the largest lift ratio. Lift ratio is a measure of how much more often the antecedent and consequent appear together than would be expected if they were independent. Therefore, high lift ratios indicate strong associations between the antecedent and consequent. We can sort the rules by lift ratio and identify the three web sites that appear in the rules with the highest lift ratios.

To identify the association rule with the largest lift ratio that also has a specific antecedent, we can filter the rules by the antecedent and sort them by lift ratio. We can then examine the consequent of the rule with the highest lift ratio.

The confidence of a rule indicates how often the consequent is observed in transactions containing the antecedent. In this case, the rule suggests that there is a high probability that customers who visit Pinterest also visit the consequent website. While the antecedent and consequent are not necessarily chronological, the rule suggests that there may be a relationship between the two websites that prompts customers to visit them together.

The lift ratio of a rule indicates the strength of the association between the antecedent and consequent. In this case, the rule suggests that customers who visit TheEveryGirl are much more likely to also visit the consequent website than would be expected if the two websites were independent. Therefore, the lift ratio indicates a strong association between the two websites.

To learn more about consequents visit:

https://brainly.com/question/23037584

#SPJ11

The area of the resulting surface formed by rotating the curve y = 1/4 x^2 − 1/2 ln(x) about the y-axis is approximately 148.81 square units.

To find the area of the surface formed by rotating the curve y = 1/4 x^2 − 1/2 ln(x) about the y-axis, we can use the formula for the surface area of a solid of revolution

S = 2π ∫[a,b] y(x) √(1 + (y'(x))^2) dx,

where a and b are the limits of integration (in this case, 1 and 3), y(x) is the equation of the curve being rotated, and y'(x) is its derivative.

First, we need to find y'(x)

y'(x) = 1/2 x − 1/2x^(-1)

Next, we can substitute y(x) and y'(x) into the formula

S = 2π ∫[1,3] [(1/4 x^2 − 1/2 ln(x)) √(1 + (1/2 x − 1/2x^(-1))^2)] dx

Simplifying the integrand

S = 2π ∫[1,3] [(1/4 x^2 − 1/2 ln(x)) √(1/4 x^2 + 1/4x^(-2))] dx

S = π ∫[1,3] [x^2√(x^2+1) − 2x ln(x)√(x^2+1)] dx

This integral can be evaluated using integration by parts or a suitable substitution. After performing the integration, we get

S = π/6 (54√10 − 5 ln(27) − 6)

= 148.81 square units.

Learn more about area here

brainly.com/question/28167838

#SPJ4

The volume of the given region u in cylindrical coordinates is 72π cubic units.

To compute the volume of the region u using integration in cylindrical coordinates, we first need to express the equation of the region in terms of cylindrical coordinates.

In cylindrical coordinates, x = rcosθ and y = rsinθ. Therefore, we can rewrite the equation of the region as:

0 ≤ z ≤ 36 - [tex]r^2[/tex]

Next, we need to determine the bounds of integration for r and θ. Since the region is bounded by a cylinder of radius √36 = 6, we have 0 ≤ r ≤ 6. The angle θ ranges from 0 to 2π, as it covers the entire region.

The volume of the region u can then be computed as:

V = ∫∫∫ u dV
= ∫0^6 ∫[tex]0^2[/tex]π ∫0^(36-[tex]r^2[/tex]) r dz dθ dr
= ∫0^6 ∫[tex]0^2[/tex]π r(36-[tex]r^2[/tex]) dθ dr
= 2π ∫[tex]0^6[/tex] r(36-[tex]r^2[/tex]) dr
[tex]= 2π [18r^2 - (r^4)/4] evaluated from 0 to 6[/tex]
= 2π (648 - 54)
= 1188π

Therefore, the volume of the region u is 1188π cubic units.
To compute the volume of the region u = {(x, y, z) : 0 ≤ z ≤[tex]36 - x^2 - y^2[/tex]} using cylindrical coordinates, we first need to convert the given Cartesian coordinates into cylindrical coordinates. In cylindrical coordinates, we use variables (ρ, θ, z) with the following relationships:

x = ρ * cos(θ)
y = ρ * sin(θ)
z = z

Now, we can rewrite the inequality for the region u in cylindrical coordinates:

[tex]0 ≤ z ≤ 36 - (ρ * cos(θ))^2 - (ρ * sin(θ))^2[/tex]

Simplifying this inequality, we get:

[tex]0 ≤ z ≤ 36 - ρ^2[/tex]

Next, we need to determine the range for ρ and θ. Since the given region is symmetric about the z-axis, we have:

0 ≤ θ ≤ 2π

For ρ, it ranges from 0 to the maximum value at the outer edge of the region, which is the surface z = 36 - [tex]ρ^2[/tex], so:

0 ≤ ρ ≤ √36 = 6

Now we can set up the triple integral to compute the volume:

Volume = ∫∫∫ ρ * dρ * dθ * dz

The limits of integration for ρ, θ, and z are as follows:

ρ: 0 to 6
θ: 0 to 2π
z: 0 to 36 - [tex]ρ^2[/tex],

Now we can write the full integral:

Volume = ∫(θ=0 to 2π) ∫(ρ=0 to 6) ∫(z=0 to 36-[tex]ρ^2[/tex], , ) ρ * dz * dρ * dθ

Evaluating this triple integral, we get:

Volume = 72π cubic units

To learn more about equation visit;

brainly.com/question/29538993

#SPJ11

To convert a nominal value to a real value in dollar terms, the base year index must be set at 100.The answer: True

1. Nominal value represents the face value or stated value of a currency, security, or financial instrument without considering the effects of inflation or changes in the purchasing power of money.
2. Real value is the value adjusted for inflation, reflecting the purchasing power of a currency in a given base year.
3. To convert a nominal value to a real value in dollar terms, we need to adjust the nominal value for inflation using a price index.
4. The base year index is typically set at 100, which allows for easy comparison and calculation of the real value.
5. To convert the nominal value to a real value, divide the nominal value by the price index in the current year and then multiply by the base year index (100). This will give you the real value in dollar terms.

for more information on nominal value see:

https://brainly.com/question/30319890

#SPJ11

To convert a nominal value to a real value in dollar terms, the base year index must be set at 100.The answer: True

1. Nominal value represents the face value or stated value of a currency, security, or financial instrument without considering the effects of inflation or changes in the purchasing power of money.
2. Real value is the value adjusted for inflation, reflecting the purchasing power of a currency in a given base year.
3. To convert a nominal value to a real value in dollar terms, we need to adjust the nominal value for inflation using a price index.
4. The base year index is typically set at 100, which allows for easy comparison and calculation of the real value.
5. To convert the nominal value to a real value, divide the nominal value by the price index in the current year and then multiply by the base year index (100). This will give you the real value in dollar terms.

for more information on nominal value see:

https://brainly.com/question/30319890

#SPJ11

Answer:

See below

Step-by-step explanation:

Mr. Hedges added the denominators together when he shouldn't have.

-12/14 + -7/14 DOES NOT EQUAL -19/28, you can't add denominators in fractions. Instead, they stay the same, while the numerators are added together.

The correct answer should be -19/14, by leaving the denominator alone and adding the numerators.

Hope this helps!

The surface will be a hyperboloid of two sheets, since it has one positive and two negative squared terms. The xz- and yz-planes will contain hyperbolas, while the xy-plane will contain an ellipse.

To sketch the surface given by the equation −x² + 7y² − z² = 7, we can start by analyzing its traces in the x-, y-, and z-planes:

1. x-trace: Set x = 0 in the equation:
7y² - z² = 7
Divide by 7:
y² - (z²/7) = 1
This is a hyperbola in the yz-plane.

2. y-trace: Set y = 0 in the equation:
-x² - z² = 7
Divide by -1:
x² + z² = -7
Since x² and z² are always non-negative, there is no y-trace.

3. z-trace: Set z = 0 in the equation:
-x² + 7y² = 7
Divide by 7:
-(x²/7) + y² = 1
This is an ellipse in the xy-plane.

Now that we have the traces, we can sketch the surface by visualizing how these traces intersect and extend in 3D space. The surface will be a hyperboloid of two sheets, since it has one positive and two negative squared terms. The xz- and yz-planes will contain hyperbolas, while the xy-plane will contain an ellipse.

To learn more about hyperboloid here:

brainly.com/question/31416442#

#SPJ11