The diagram shows the intersection of support beams in the attic of Artem's house and the roof. What is the measure of the smallest angle between the beams and the roof? Show your work.

(a) The sample mean is sufficient cannot conclude that the treatment has a significant effect.

(b) A one-tailed test with α = 0.05, is conclude that the treatment has a significant effect.

(c) A two-tailed test, We fail to reject the null hypothesis.

(d) one-tailed test with α we reject the null hypothesis

(e) A one-tailed test has a greater probability of rejecting the null hypothesis than a two-tailed test.

a. To determine if the sample mean is sufficient to conclude that the treatment has a significant effect, we need to perform a two-tailed hypothesis test:

Null hypothesis: μ = 100

Alternative hypothesis: μ ≠ 100

The level of significance is α = 0.05. Since the population standard deviation σ is known, we can use a z-test:

z = (M - μ) / (σ / √n) = (106 - 100) / (10 / √9) = 1.8

The critical values for a two-tailed test with α = 0.05 are ±1.96. Since the calculated z-value of 1.8 does not fall in the rejection region, we fail to reject the null hypothesis. Therefore, we cannot conclude that the treatment has a significant effect.

b. To perform a one-tailed test with α = 0.05, we need to change the alternative hypothesis:

Null hypothesis: μ = 100

Alternative hypothesis: μ > 100

The critical value for a one-tailed test with α = 0.05 is 1.645. Since the calculated z-value of 1.8 is greater than the critical value, we reject the null hypothesis. Therefore, we can conclude that the treatment has a significant effect.

c. If the population standard deviation is unknown, we need to use a t-test instead of a z-test. The null and alternative hypotheses are the same as in part a:

Null hypothesis: μ = 100

Alternative hypothesis: μ ≠ 100

The sample standard deviation can be used as an estimate of the population standard deviation:

t = (M - μ) / (s / √n) = (106 - 100) / (s / √9)

Since σ is unknown, we cannot use the critical values for a z-test. Instead, we need to use the t-distribution with n-1 degrees of freedom. For a two-tailed test with α = 0.05 and 8 degrees of freedom, the critical values are ±2.306. If the calculated t-value falls within the rejection region, we reject the null hypothesis. Otherwise, we fail to reject the null hypothesis.

d. To perform a one-tailed test with α = 0.05, we need to change the alternative hypothesis:

Null hypothesis: μ = 100

Alternative hypothesis: μ > 100

The critical value for a one-tailed test with α = 0.05 and 8 degrees of freedom is 1.859. If the calculated t-value is greater than the critical value, we reject the null hypothesis. Otherwise, we fail to reject the null hypothesis.

e. The magnitude of the standard deviation and the number of tails in the hypothesis test can both influence the outcome of a hypothesis test. A larger standard deviation will result in a larger standard error, which in turn will decrease the calculated t- or z-value and make it less likely to reject the null hypothesis.

The number of tails in the hypothesis also affects the outcome.  A one-tailed test has a greater probability of rejecting the null hypothesis than a two-tailed test, given the same level of significance and sample mean. However, a one-tailed test can be more susceptible to type I errors if the alternative hypothesis is not well-supported by the data.

Learn more about hypothesis test

brainly.com/question/30588452

#SPJ11

The expected value of the function u(x) = x^2 for the given random variable X with pmf f(x) = 1/8 for x = -1, 0, 1 is option (B) 1/4.

The expected value of u(x) can be calculated using the formula

E(u(x)) = Σ u(x) × f(x) for all values of x

Given that the probability mass function (pmf) of X is f(x) = 1/8 for x = -1, 0, 1, we can calculate the expected value of u(x) as follows

E(u(x)) = (-1)^2 × f(-1) + 0^2 × f(0) + 1^2 × f(1)

= 1 × (1/8) + 0 × (1/8) + 1 × (1/8)

Do the arithmetic operation

= 2/8

Simplify the term

= 1/4

Therefore, the answer is option (B) 1/4.

Learn more about probability mass function here

brainly.com/question/30765833

#SPJ4

The surface area of the right prism with dimensions 3m, 8m, 9.1m is 126.60 m².

A prism is a three-dimensional shape that has two parallel congruent bases that are both polygons, and lateral faces that connect these bases. The shape of the lateral faces can vary, but they are typically parallelograms. Examples of prisms include rectangular prisms (such as a box), triangular prisms, and hexagonal prisms.

To find the surface area of a right prism, we need to find the area of each face and add them up.

In this case, we have a rectangular base with dimensions of 3 m and 8 m, so the area of the base is:

Area of base = length x width = 3 m x 8 m = 24 m²

The height of the prism is 9.1 m, so the area of the two rectangular faces is:

2 x (length x height) = 2 x (3 m x 9.1 m) = 54.6 m²

The area of the top and bottom faces, which are also rectangles, are the same as the base, so we add that twice:

2 x 24 m² = 48 m²

Now we can add up all the areas to find the surface area:

Surface area = area of base + area of two rectangular faces + area of top and bottom faces

Surface area = 24 m² + 54.6 m² + 48 m²

Surface area = 126.6 m²

Rounding to the nearest hundredth, the surface area is about 126.60 square meters.

To know more about prism visit:

brainly.com/question/29722724

#SPJ1

The maximum production is 3.334 at the point (k, l) is (4.022, 5.029)

To maximize production, we need to maximize the production function:

[tex]p = k^{(2/5)} * l^{(3/5)}[/tex]

subject to the budget constraint:

b = 4k + 5l = 100

We can use the method of Lagrange multipliers to solve this problem. The Lagrangian function is:

[tex]L = k^{(2/5)} * l^{(3/5)} + \lambda(100 - 4k - 5l)[/tex]

where λ is the Lagrange multiplier.

To find the critical points, we need to take the partial derivatives of L with respect to k, l, and λ, and set them equal to zero:

∂L/∂k = [tex]2/5 * k^{(-3/5)} * l^{(3/5)} - 4\lambda[/tex] = 0

∂L/∂l =[tex]3/5 * k^{(2/5)} * l^{(-2/5)} - 5\lambda[/tex] = 0

∂L/∂λ = 100 - 4k - 5l = 0

Solving these equations, we get:

k = [tex](25/6)^{(5/7)}[/tex] ≈ 4.022

l = [tex](20/3)^{(5/7)}[/tex] ≈ 5.029

λ =[tex](2/5) * (25/6)^{(-2/7)} * (20/3)^{(-3/7)}[/tex]≈ 0.327

Therefore, the maximum production is:

p =[tex]k^{(2/5)} * l^{(3/5)}[/tex] ≈ 3.334

at the point (k, l) ≈ (4.022, 5.029), subject to the budget constraint 4k + 5l = 100.

Learn more about maximize production

brainly.com/question/28963112

#SPJ11

Answer:

All whole numbers are rational numbers.

Step-by-step explanation:

The value of x after the following statements execute will be 4.

In the given code, there are two statements. First, an integer variable x is declared without being initialized, which means it will have an unspecified value. Then, x is assigned a value based on the result of a conditional (ternary) operator.

The conditional operator has the following syntax: (condition) ? value_if_true : value_if_false. It evaluates the condition, and if the condition is true, it returns value_if_true, otherwise it returns value_if_false.

In this case, the condition being evaluated is (5 <= 3 & 'a' < 'f'). Let's break it down:

5 <= 3 is a comparison between 5 and 3 using the less than or equal to operator. This evaluates to false, because 5 is not less than or equal to 3.

'a' < 'f' is a comparison between the ASCII values of 'a' and 'f'. In ASCII, the value of 'a' is less than the value of 'f'. So this comparison evaluates to true.

& is the bitwise AND operator, which performs a bitwise AND operation on the individual bits of the operands. In this case, it performs a bitwise AND operation on the result of the two previous comparisons. However, since the result of the first comparison is false (0), the bitwise AND operation will also result in false (0).

So, the overall result of the condition (5 <= 3 & 'a' < 'f') is false (0), because the first comparison is false. As a result, the value_if_false branch of the conditional operator is executed, which is 4. Therefore, the value of x will be assigned as 4 after the statements execute.

To learn more about integer, refer below:

https://brainly.com/question/15276410

#SPJ11

The perameter to find a cartesian equation of the curve is y^2 = 1 + x.

We are given that;

x=tan^2(theta)

y=sec(theta)

Now,

We need to solve for t in one equation and substitute it into the other equation. In this case, we have:

x = tan^2(t) y = sec(t)

Solving for t in the first equation, we get:

t = arctan(sqrt(x))

Substituting this into the second equation, we get:

y = sec(arctan(sqrt(x)))

Using the identity sec^2(t) = 1 + tan^2(t),

we can simplify this equation as:

y^2 = 1 + x

Therefore, by the given equation the answer will be y^2 = 1 + x

Learn more about equations here;

https://brainly.com/question/25180086

#SPJ1

The coordinates of the matrix m=[337−6] with respect to the standard basis of the space of 2x2 matrices, b={[1000],[0100],[0010],[0001]}, are [337, -6, 0, 0].

To find the coordinates of a matrix m=[a b; c d] with respect to the standard basis b, we need to express m as a linear combination of the basis vectors.

So we have to solve the equation

m = x[1000] + y[0100] + z[0010] + w[0001]

where [1000], [0100], [0010], and [0001] are the standard basis vectors.

Expanding the equation gives

[a b; c d] = x[1 0; 0 0] + y[0 1; 0 0] + z[0 0; 1 0] + w[0 0; 0 1]

Equating the corresponding entries of the matrices gives

a = x

b = y

c = z

d = w

Therefore, the coordinates of the matrix m=[337 -6] with respect to the standard basis are

x = 337

y = -6

z = 0

w = 0

So the coordinates of m are (337, -6, 0, 0) with respect to the standard basis.

To know more about matrix:

https://brainly.com/question/28180105

#SPJ4

As sample variance increases, the likelihood of rejecting the null hypothesis and the effect on measures of effect size such as r2 and Cohen's d can be described by the likelihood increases and measures of effect size increase. So, the correct option is A.

As sample variance increases, the data points are more spread out, making it more likely to detect a significant difference between groups, thus increasing the likelihood of rejecting the null hypothesis. Additionally, the larger variance may also lead to larger effect sizes, as r2 and Cohen's d both consider the magnitude of differences in the data. Hence Option A is the correct answer.

You can learn more about variance at: brainly.com/question/14116780

#SPJ11

The rate at which water is draining is 72 liters per second.

The slope of a graph is a measure of how steep the graph is, or how much the dependent variable changes in relation to the independent variable.

The rate at which water is draining is equal to the slope of the graph;

Mathematically, the slope is defined as the ratio of the change in the vertical or y-axis value (the dependent variable) to the change in the horizontal or x-axis value (the independent variable) between two points on the graph. It represents the rate of change or the steepness of the graph.

The slope is usually denoted by the letter "m" and is calculated using the following formula:

Slope (m) = (change in y-axis value)/(change in x-axis value)

rate = slope = (0 L - 360 L )/( 5 s - 0 s )

rate = -360 L / 5 s

rate = -72 L/s

Learn more about slope here: https://brainly.com/question/3493733

#SPJ1

Based on the information provided, we can conclude that the average starting salary of recent graduates at the institution is likely not significantly different from the overall NACE average of $48,127.

This is because the 95% confidence interval obtained from the institution's SRS includes the NACE average.

However, it is important to note that this conclusion is limited to the specific sample size and methodology used by the institution for their survey.

The National Association of Colleges and Employers (NACE) Spring Salary Survey indicates an average starting-salary offer of $48,127 for recent college graduates.

In comparison, your institution conducted a survey using a Simple Random Sample (SRS) of 300 graduates and calculated a 95% confidence interval of ($46,382, $48,008) for their average starting salary.

In summary, the confidence interval suggests that the average starting salary of recent graduates at your institution is likely to fall between $46,382 and $48,008.

Since the NACE average of $48,127 is not within this interval, it can be concluded that there is a difference between the average starting salary at your institution and the overall NACE average, with your institution's average being slightly lower.

Visit here to learn more about Sample Size:

brainly.com/question/30509642

#SPJ11

B(71,w) = 0.013812w gives a 71-inch person's body mass index when w is their weight in pounds (w ≥ 0).

To find the cross-sectional model B(71,w), you need to substitute h = 71 inches in the given equation B(h,w) = 697.5wh^{-2}.

Step 1: Substitute h = 71 in the given equation:
B(71,w) = 697.5 * (71)^(-2) * w

Step 2: Calculate the coefficient by evaluating (71)^(-2) and multiplying by 697.5:
Coefficient = 697.5 * (1/(71^2)) ≈ 0.013812

Step 3: Write the cross-sectional model using the calculated coefficient (rounded to six decimal places):
B(71,w) = 0.013812 * w

B(71,w) = 0.013812w gives a 71-inch person's body mass index when w is their weight in pounds (w ≥ 0).

visit here to learn more about mass index:

brainly.com/question/10694067

#SPJ11

Based on the mentioned values and the provided informations, the quotient of 5 ÷ 1/4 is calculated to be  20 [tex]\frac{2}{3}[/tex] . So, option D is correct.

To solve this problem, we need to divide 5 by 1/4. We can do this by multiplying 5 by the reciprocal of 1/4.

The reciprocal of 1/4 is 4/1, so we can rewrite the expression as 5 x 4/1, which simplifies to 20.

Therefore, the quotient of 5 ÷ 1/4 is 20 [tex]\frac{2}{3}[/tex]

To elaborate further, 1/4 represents one part of the large rectangle, which has been divided into five equal parts. When we divide 5 by 1/4, we are essentially asking how many times 1/4 goes into 5.

Multiplying 5 by the reciprocal of 1/4, which is 4/1, is the same as dividing 5 by 1/4. This gives us a quotient of 20, which can also be expressed as a mixed number, 20 ²/₃.

Learn more about rectangle :

https://brainly.com/question/20432857

#SPJ4

The complete question is :

large rectangle is divided into five equal parts. What is the quotient of 5 ÷ 1/4? The possible answers are A) 1/20, B) 5/4, C) 4/5, and D) 20 2/3.

The limit expression sin(x sin(x)) when evaluated by continuity does not exist

The limit expression is given as

sin(x sin(x))

Where, x tends to infinity

By examining the function sin(x sin(x)), we can see that the function is a divergent series

This means that the limits diverges or the limit do not exist (DNE)

Hence, the limit expression sin(x sin(x)) where x tends to infinity does not exist

Read more about derivative at

https://brainly.com/question/5313449

#SPJ1

The limit lim x→ 8 sin(x sin(x)) can be evaluated using continuity. The answer is sin(8 sin(8)), which can be calculated approximately using a calculator.

To evaluate the limit lim x→ 8 sin(x sin(x)), we can use the fact that the composition of continuous functions is continuous. Since sin(x) is continuous for all real numbers, and x sin(x) is continuous at x = 8, we can conclude that sin(x sin(x)) is also continuous at x = 8. Therefore, the limit is equal to sin(8 sin(8)).

Using a calculator, we can calculate sin(8 sin(8)) approximately to three decimal places.

https://brainly.com/question/35736176

#SPJ12

The probability P(x < 80) for a normally distributed random variable x with a mean μ = 82 and a standard deviation σ = 5 is approximately 0.3446 when rounded to four decimal places.

Standard deviation is: It is a measure of how spread out numbers are. It is the square root of the Variance, and the Variance is the average of the squared differences from the Mean.

To find the probability P(x < 80) for a normally distributed random variable x with a mean μ = 82 and a standard deviation σ = 5,

To find this probability, follow these steps:

1. Calculate the z-score for x = 80. The z-score is given by the formula: z = (x - μ) / σ
2. Look up the z-score in a standard normal distribution table (also known as a z-table) to find the corresponding probability.

Step 1: Calculate the z-score
z = (80 - 82) / 5 = -2 / 5 = -0.4

Step 2: Look up the z-score in the z-table
Looking up a z-score of -0.4 in a z-table, we find a corresponding probability of approximately 0.3446.

Learn more about the standard deviation: https://brainly.com/question/475676

#SPJ11

The probability P(x < 80) for a normally distributed random variable x with a mean μ = 82 and a standard deviation σ = 5 is approximately 0.3446 when rounded to four decimal places.

Standard deviation is: It is a measure of how spread out numbers are. It is the square root of the Variance, and the Variance is the average of the squared differences from the Mean.

To find the probability P(x < 80) for a normally distributed random variable x with a mean μ = 82 and a standard deviation σ = 5,

To find this probability, follow these steps:

1. Calculate the z-score for x = 80. The z-score is given by the formula: z = (x - μ) / σ
2. Look up the z-score in a standard normal distribution table (also known as a z-table) to find the corresponding probability.

Step 1: Calculate the z-score
z = (80 - 82) / 5 = -2 / 5 = -0.4

Step 2: Look up the z-score in the z-table
Looking up a z-score of -0.4 in a z-table, we find a corresponding probability of approximately 0.3446.

Learn more about the standard deviation: https://brainly.com/question/475676

#SPJ11

Answer:

y < 3

Step-by-step explanation:

The line is y = 3

Since it is under the line,

y < 3

Since it is dotted, it will remain as y < 3

Hope this helps and be sure to mark this as brainliest! :)

Answer:

  B.  6/7

Step-by-step explanation:

You want the radius of each of two circles tangent to each other and the extended segments of ∆ABC.

Referring to the attached figure, we see that ∆EGF is similar to ∆ABC. This means EG/EF = AB/AC = 5/4.

∆AGH is also similar to ∆ABC, so we also have the proportion ...

  GH/AH = BC/AC = 3/4

In terms of radius r, GH = (3+5/4)r, and AH = r +4:

  (17/4)r / (r +4) = 3/4

  17r = 3(r +4) . . . . . . . . multiply by 4(r+4)

  14r = 12 . . . . . . . . subtract 3r

  r = 6/7 . . . . . . divide by 14, simplify

The radius of each circle is 6/7 units.

It is important to remember that the total probability rule refers to the sum of probabilities of intersections between A and two mutually exclusive and exhaustive events (B and BC), while the concept of independence relates to how the occurrence of one event affects the probability of another.

The total probability rule states that if we have two mutually exclusive and exhaustive events B and BC (B complement), then the probability of event A can be calculated as the sum of the probabilities of the intersections of A with both B and BC. Mathematically, this can be expressed as:

P(A) = P(A ∩ B) + P(A ∩ BC)

Now, let's discuss the term "independent". Two events are considered independent if the occurrence of one event does not affect the probability of the other event. In this case, if events A and B are independent, we can say:

P(A ∩ B) = P(A) * P(B)
P(A ∩ BC) = P(A) * P(BC)

However, the total probability rule is not dependent on whether events A and B are independent or not. It is important to remember that the total probability rule refers to the sum of probabilities of intersections between A and two mutually exclusive and exhaustive events (B and BC), while the concept of independence relates to how the occurrence of one event affects the probability of another.

to learn more about probability click here:

https://brainly.com/question/15124899

#SPJ11

The correct choice is:
A. Infinity sigma n = 0 e^(-4n) = 1 / (1 - e^(-4))

To evaluate the given geometric series or state that it diverges, we need to first identify the general form of a geometric series:

Σ (from n=0 to infinity) ar^n

where 'a' is the first term and 'r' is the common ratio between consecutive terms.

In the given series, Σ (from n=0 to infinity) e^(-4n), we can identify that:

a = e^(0) = 1
r = e^(-4)

For a geometric series to converge, the common ratio 'r' must be between -1 and 1 (excluding -1 and 1):

-1 < r < 1

In this case:

-1 < e^(-4) < 1

Since the common ratio 'r' is between -1 and 1, the series converges, and we can use the formula to find the sum of an infinite geometric series:

S = a / (1 - r)

Substitute the values of 'a' and 'r':

S = 1 / (1 - e^(-4))

So, the correct choice is:

A. Infinity sigma n = 0 e^(-4n) = 1 / (1 - e^(-4))

Visit here to learn more about geometric series:

brainly.com/question/4617980

#SPJ11

( A )-  We use the inclusion-exclusion principle to find the total number of integers in the set that are divisible by at least one of 2, 3, 5, or 7. The result is 104.

( B-) There are 48 primes in the set of integers that are divisible by at least one of 2, 3, 5, or 7.

(C-) n must be greater than 120, which means that all composite numbers in the set 1, 2,..., 120 that were not counted in part (a) must be divisible by at least one of 2, 3, 5, or 7.

(a) The number of integers in the set 1, 2,..., 120 that are divisible by at least one of 2, 3, 5, and 7 can be found using the principle of inclusion-exclusion. We first find the number of integers that are divisible by each individual prime factor:

Number of integers divisible by 2: 60

Number of integers divisible by 3: 40

Number of integers divisible by 5: 24

Number of integers divisible by 7: 17

Next, we find the number of integers that are divisible by each pair of prime factors:

Number of integers divisible by 2 and 3: 20

Number of integers divisible by 2 and 5: 12

Number of integers divisible by 2 and 7: 8

Number of integers divisible by 3 and 5: 8

Number of integers divisible by 3 and 7: 5

Number of integers divisible by 5 and 7: 3

We continue in this way to find the number of integers that are divisible by three prime factors, four prime factors, and so on. Finally, we use the inclusion-exclusion principle to find the total number of integers in the set that are divisible by at least one of 2, 3, 5, or 7. The result is 104.

(b) To find the number of primes in the set of integers that are divisible by at least one of 2, 3, 5, or 7, we need to exclude all composite numbers. We can do this by subtracting the number of integers that are divisible by two or more of 2, 3, 5, and 7 from the total number of integers found in part (a):

Number of integers divisible by 2 and 3: 20

Number of integers divisible by 2 and 5: 12

Number of integers divisible by 2 and 7: 8

Number of integers divisible by 3 and 5: 8

Number of integers divisible by 3 and 7: 5

Number of integers divisible by 5 and 7: 3

Number of integers divisible by 2, 3, and 5: 4

Number of integers divisible by 2, 3, and 7: 2

Number of integers divisible by 2, 5, and 7: 2

Number of integers divisible by 3, 5, and 7: 1

Therefore, there are 48 primes in the set of integers that are divisible by at least one of 2, 3, 5, or 7.

(c) Of the integers in 1, 2,..., 120 that were not counted in part (a), the only one that is not prime is 1. To see why all of the others are primes, consider any composite number n that is not divisible by 2, 3, 5, or 7. By the fundamental theorem of arithmetic, n can be written as a product of primes, none of which are 2, 3, 5, or 7. But since n is composite, it must have at least one prime factor other than 2, 3, 5, or 7. Therefore, n must be greater than 120, which means that all composite numbers in the set 1, 2,..., 120 that were not counted in part (a) must be divisible by at least one of 2, 3, 5, or 7.

(d) Using the results from parts (b) and (c), we can find the total number

Learn more about “ fundamental theorem of arithmetic “ visit here;

https://brainly.com/question/15317294

#SPJ4

At least 5 terms of the series are needed for the sum to be accurate to within 0.00001.

To find the smallest value of n for which the sum of the series σ^[infinity]_n=1 5/(2n-1)^4 is accurate to within 0.00001, follow these steps,

1. Recognize that the given series is a converging series since the terms are positive and decreasing.
2. Use the Remainder Estimation Theorem for alternating series, which states that the error in using the sum of the first n terms of a converging alternating series is less than the (n+1)th term.
3. In this case, the error should be less than 0.00001, so we have:
  5/(2(n+1)-1)^4 < 0.00001

4. Solve for n,
  (2(n+1)-1)^4 < 5/0.00001
  (2n+1)^4 < 500000
  n = 4.54 (approximately)

Since n must be an integer, the smallest value of n that satisfies the condition is n = 5. Therefore, at least 5 terms of the series are needed for the sum to be accurate to within 0.00001.

Learn more about "series": https://brainly.com/question/24643676

#SPJ11

By  exponential growth , In light of this, it will take roughly 12 years for the population to reach 6300.

A process called exponential growth sees a rise in quantity over time. It happens when a quantity's derivative, or instantaneous rate of change with respect to time, is proportionate to the amount itself1. A quantity that is increasing exponentially is referred to as a function, and the exponent, which stands in for time, is the variable that represents time. (in contrast to other types of growth, such as quadratic growth)¹. If the proportionality constant is negative, exponential decline happens instead

We may utilise the exponential growth formula to resolve this issue:

A = P(1 + r)ⁿ

where: A = total sum

P = starting sum

Annual Growth Rate is r.

N equals how many years.

We are aware that P is the initial population and A is the end population, both of which are 5000. The yearly growth rate, r, is 3.5%, as well. Solving for n using these values as inputs results in:

6300 = 5000(1 + 0.035)ⁿ

If we simplify this equation, we get:

1.26 = 1.035ⁿ

When you take the natural logarithm of both sides, you get:

ln(1.26) =  ln(1.035)

To find n, solve for:

12 yearsⁿ = ln(1.26) / ln(1.035).

In light of this, it will take roughly 12 years for the population to reach 6300.

To know more about exponential growth visit:

brainly.com/question/11487261

#SPJ1

the complete set of zeros of f(x) is:

x = 1, x = -11, and x = 10

To find the reasonable zeros of the polynomial capability[tex]f(x) = x^3 - 111x + 110[/tex], we can utilize the Normal Root Hypothesis.

Any rational zero of a polynomial function is, in accordance with this theorem, of the form p/q, where p is a factor of the constant term (in this case, 110) and q is a factor of the leading coefficient (which is 1).

So, the possible rational zeros of f(x) are:

p/q = ±1, ±2, ±5, ±10, ±11, ±22, ±55, ±110

We can now use synthetic division or long division to check which of these possible rational zeros actually are zeros of f(x). We start with p/q :

So, x - 1 is a factor of f(x), and we can write:

[tex]f(x) = (x - 1)(x^2 + x - 110)[/tex]

To find the other zeros of f(x), we need to solve the quadratic equation x^2 + x - 110 = 0. We can use the quadratic formula:

[tex]x = (-1 ± \sqrt{ (1^2 - 4(1)(-110)))} / 2(1)[/tex]

[tex]x = (-1 ± \sqrt{441}) / 2[/tex]

x = (-1 ± 21) / 2

So, the other two zeros of f(x) are:

x = -11 and x = 10

Therefore, the complete set of zeros of f(x) is:

x = 1, x = -11, and x = 10

know more about polynomial function visit :

https://brainly.com/question/12976257

#SPJ1

[tex][1 - {(1-2e-y_1 )(1 -2e-y_2 )}](e -y_1-y_2 )dy_1dy_2[/tex]Therefore, [tex]f(y_1, y_2)[/tex] is a valid probability density function for −1 ≤ α ≤ 1, since it satisfies the non-negativity and normalization properties.

To determine if the given probability density function [tex]f(y_1, y_2)[/tex]is valid, we need to check that it satisfies the following two properties:

[tex]f(y_1, y_2)[/tex] is non-negative for all [tex](y_1, y_2)[/tex]

The integral of [tex]f(y_1, y_2)[/tex]over the entire [tex](y_1-y_2)[/tex] plane is equal to 1.

Non-negativity:

[tex]f(y_1, y_2)[/tex] is non-negative if it is greater than or equal to zero for all [tex]y_{2}[/tex] and [tex]y_{2}[/tex].

For 0 ≤ y1, 0 ≤ y2, we have

[tex][1 - {(1-2e-y_1 )(1 -2e-y_2 )}]e -y_1-y_2 \geq 0[/tex]

since the term in the brackets is between 0 and 1 for −1 ≤ α ≤ 1.

For all other values of y1 and y2, f(y1, y2) is zero, which is non-negative.

Therefore, f(y1, y2) is non-negative for all (y1, y2).

Normalization:

The integral of f(y1, y2) over the entire y1-y2 plane is equal to 1, i.e.,

∫∫[tex]f(y_1, y_2)dy1dy^2[/tex] = 1

We split the integral into two parts:

∫∫[tex]f(y_1, y_2)dy_1dy_2[/tex] = ∫∫[tex][1 - {(1-2e-y_1 )(1 -2e-y_2 )}](e -y_1-y_2 )dy_1dy_2[/tex]

The integral on the right-hand side can be evaluated using the fact that the integral of e^(-y) over the entire positive real line is equal to 1.

∫∫[tex]f(y_1, y_2)dy_1dy_2[/tex] = ∫∫[tex][1 - {(1-2e-y_1 )(1 -2e-y_2 )}](e -y_1-y_2 )dy_1dy_2[/tex]

= ∫∫[tex][e -y_1 e -y_2 -e -y_1 e -y_2 (1 −-2e -y_1 )(1 - 2e y_2 )]dy_1dy_2[/tex]

= ∫0∞e −y2 dy2 ∫0∞e −y1dy1 − α∫0∞e −y2 dy2 ∫0∞e −y1dy1 ∫0∞(1 − 2e −y1 )(1 − 2e −y2) e −y1−y2dy1dy2

= 1 − α(1 − 1)(1 − 1)∫0∞e −y2 dy2 ∫0∞e −y1dy1

= 1

To know more about probability visit:

https://brainly.com/question/30034780

#SPJ1