The equilibrium constant for the gas phase reaction N2(g) + 3H2(g) <---> 2NH3(g) is Keq = 4.34x10^-3 at 300 degrees Celsius. At equilibrium
a) products predominate
b) roughly equal amounts of products and reactants are present
c) only products are present
d) only reactants are present
e) reactants predominate

To make 586 mL of 7.85 × 10^−2 M potassium sulfate, you will need 8.01 grams of solute.

To determine how many grams of solute are needed to make 586 mL of 7.85 × 10^−2 M potassium sulfate, follow these steps:

1. Convert the volume from mL to L: 586 mL * (1 L / 1000 mL) = 0.586 L
2. Use the molarity formula (M = moles of solute / volume of solution in L): 7.85 × 10^−2 M = moles of solute / 0.586 L
3. Solve for moles of solute: moles of solute = 7.85 × 10^−2 M * 0.586 L = 0.04599 moles
4. Determine the molar mass of potassium sulfate (K2SO4): (2 * 39.10 g/mol K) + (1 * 32.07 g/mol S) + (4 * 16.00 g/mol O) = 174.26 g/mol
5. Calculate the mass of potassium sulfate needed: 0.04599 moles * 174.26 g/mol = 8.01 g

To know more about "Molarity" refer here:

https://brainly.com/question/22837979#

#SPJ11

The best description of the product of the given reaction with LIAIHA and H2O, dil, aq HCI is a mixture of diastereomers.

Based on the information provided, the best description of the product of the reaction with the given reagents (1) LIAIH4, and (2) H2O, dilute aq HCl, is a "mixture of diastereomers."

Here's a step-by-step explanation:

1. LIAIH4 (Lithium aluminum hydride) is a strong reducing agent that reduces various functional groups, including carbonyl groups, to their corresponding alcohols.

2. The reaction proceeds through nucleophilic addition, and the stereochemistry of the product depends on the starting compound.

3. H2O and dilute aq HCl are used to work up the reaction mixture, which neutralizes any remaining LIAIH4 and helps isolate the product.

4. Since the starting compound has more than one stereocenter, and reduction with LIAIH4 changes only one of these centers, the product will have a mixture of diastereomers due to the different possible stereochemical configurations at the unaffected stereocenters.

In summary, the product of this reaction will be a mixture of diastereomers, as it involves a stereochemistry change at only one stereocenter while the others remain unaffected.

Learn more about diastereomers at: brainly.com/question/21506956

#SPJ11

The concentration of the aqueous solution of NaOH with a pH of 11.09 is approximately 1.23 x 10^(-3) M.

To calculate the concentration of an aqueous solution of NaOH that has a pH of 11.09, follow these steps:

1. Understand the relationship between pH and pOH: pH + pOH = 14
2. Calculate the pOH: pOH = 14 - pH = 14 - 11.09 = 2.91
3. Use the pOH to find the concentration of OH- ions: [OH-] = 10^(-pOH) = 10^(-2.91) ≈ 1.23 x 10^(-3) M
4. Determine the concentration of NaOH: Since NaOH is a strong base and dissociates completely in water, the concentration of NaOH is equal to the concentration of OH- ions.

So, [NaOH] = [OH-] = 1.23 x 10^(-3) M

To know more about Concentration:

https://brainly.com/question/15928361

#SPJ11

The concentration of the aqueous solution of NaOH with a pH of 11.09 is approximately 1.23 x 10^(-3) M.

To calculate the concentration of an aqueous solution of NaOH that has a pH of 11.09, follow these steps:

1. Understand the relationship between pH and pOH: pH + pOH = 14
2. Calculate the pOH: pOH = 14 - pH = 14 - 11.09 = 2.91
3. Use the pOH to find the concentration of OH- ions: [OH-] = 10^(-pOH) = 10^(-2.91) ≈ 1.23 x 10^(-3) M
4. Determine the concentration of NaOH: Since NaOH is a strong base and dissociates completely in water, the concentration of NaOH is equal to the concentration of OH- ions.

So, [NaOH] = [OH-] = 1.23 x 10^(-3) M

To know more about Concentration:

https://brainly.com/question/15928361

#SPJ11

In a saturated solution of copper(I) chloride, the equilibrium concentration of Cu+ and Cl- ions is 1.025 x 10⁻³ M.

The saturated solution of ionic substances is denoted by the symbol Ksp. (A saturated solution is in a state of equilibrium between the dissolved, dissociated, undissolved solid, and the ionic compound).

The following balanced chemical equation describes how copper(I) chloride dissolves:

CuCl(s) ⇌ Cu+(aq) + Cl-(aq)

This equilibrium's Ksp expression is as follows:

Ksp = [Cu+][Cl-]

Cu+ and Cl- will have the same equilibrium concentration (x), respectively. The Ksp expression then becomes:

Ksp = [Cu+][Cl-] = x²

By changing the specified value of Ksp, we obtain:

1.05 × 10⁻⁶ = x²

When we square the two sides, we obtain:

x = √(1.05 × 10⁻⁶) = 1.025 × 10⁻³

To know more about equilibrium visit:-

https://brainly.com/question/19267717

#SPJ1

To calculate ΔG°rxn, we need to use the formula:

ΔG°rxn = ΣΔG°f(products) - ΣΔG°f(reactants)

First, we need to find the ΔG°f values for each compound involved in the reaction. We are given these values:

ΔG°f(HNO3) = -73.5 kJ/mol
ΔG°f(N2H4) = 149.3 kJ/mol
ΔG°f(N2) = -237.1 kJ/mol
ΔG°f(H2O) = 0 kJ/mol (since it's in its standard state)

Now, we can substitute these values into the formula:

ΔG°rxn = [7(-237.1) + 12(0)] - [4(-73.5) + 5(149.3)]
ΔG°rxn = -1659.7 - 1232.0
ΔG°rxn = -2891.7 kJ/mol

However, the question asks for the answer in kJ, not kJ/mol. So we need to divide by the number of moles of reaction (which is 1, since the coefficients are all in terms of 1 mole):

ΔG°rxn = -2891.7 kJ/mol ÷ 1 mol
ΔG°rxn = -2891.7 kJ

Therefore, the answer is B: -312.9 kJ (rounded to the nearest tenth).

brainly.com/question/31485060

#SPJ11

It is appropriate to use the t distribution with n-1 degrees of freedom as a substitute for the standard normal distribution when the sample size is small (less than 30) and the population standard deviation is unknown.

This is because the t distribution takes into account the uncertainty associated with estimating the population standard deviation from the sample standard deviation. By using the t distribution, we can obtain more accurate estimates of the population mean when working with small sample sizes. However, as the sample size increases, the t distribution approaches the standard normal distribution, and using the t distribution becomes less necessary.

To learn more about "t-distribution", visit: https://brainly.com/question/17469144

#SPJ11

The given reaction is: OH + H2O   H⁺ + OH. This reaction involves the transfer of a hydrogen ion (H+) between the hydroxide ion (OH) and water (H2O).

However, there is no carbon involved in this reaction, so it cannot be classified as a net reduction, oxidation, or redox reaction of carbon.

Thus, none of the provided options (a, b, or c) accurately describe the given reaction. Instead, it is an acid-base reaction, with OH⁻ acting as a base and H₂O acting as an acid. The reaction reaches an equilibrium as no net change occurs. This reaction is important in maintaining the pH balance of solutions and is an example of an acid-base reaction.

For more such questions on hydrogen , click on:

https://brainly.com/question/24433860

#SPJ11

The value of q when the solution contains 2.00×10⁻² M Sr₂ and 1.50×10⁻³ M CrO₄²⁻ is 0.135.

To answer this question, we need to use the solubility product constant (Ksp) expression for the reaction between strontium ions (Sr₂⁺) and chromate ions (CrO₄²⁻):

Ksp = [Sr₂⁺][CrO₄²⁻]

We are given the concentrations of Sr₂⁺ and CrO₄²⁻ in the solution, so we can plug them into the expression and solve for Ksp:

Ksp = (2.00 × 10⁻²)(1.50 × 10⁻³)

= 3.00 × 10⁻⁵

Now we need to use the Ksp expression to find the concentration of the common ion, which in this case is the strontium ion (Sr₂⁺). To do this, we assume that all of the Sr₂⁺ and CrO₄²⁻ ions in the solution react to form a solid precipitate, so the amount of Sr₂⁺ that precipitates out of solution is equal to the amount of CrO₄²⁻ that precipitates out. Let x be the molar solubility of SrCrO₄ (the solid precipitate) in the solution. Then:

Ksp = [Sr₂⁺][CrO₄²⁻] = x*x = x²

Solving for x, we get:

x = √(Ksp)

= √(3.00 × 10⁻⁵)

= 1.73 × 10⁻²

Therefore, the concentration of Sr₂⁺ in the solution is also 1.73 × 10⁻² M (since all of it precipitates out). Finally, we can use the concentration of Sr₂⁺ and the initial concentration of Sr²⁺ to find the fraction that has precipitated out:

q = (initial concentration of Sr₂⁺ - concentration of Sr₂⁺ in solution) / initial concentration of Sr₂⁺

q = (2.00×10⁻² - 1.73×10⁻²) / 2.00×10⁻²

= 0.135

Therefore, the value of q is 0.135.

Learn more about Sr₂⁺: https://brainly.com/question/19986929

#SPJ11

The solubility of M2Z in mol/L is approximately 1.3 x 10^-4 M. The correct answer is b. 1.2 x 10^-4 M, as it is the closest option to the calculated value.

To calculate the solubility in mol/L of an unknown salt M2Z, given its ksp value (6.6 x 10^-12).
The solubility product constant (ksp) is an equilibrium constant that describes the solubility of a slightly soluble ionic compound. For M2Z, the dissolution equation is:
M2Z (s) ⇌ 2M^+ (aq) + Z^2- (aq)
The Ksp expression is: Ksp = [M^+]²[Z^2-]
Let x be the solubility of M2Z in mol/L. Then, [M^+] = 2x and [Z^2-] = x. Substituting these values into the Ksp expression:
Ksp = (2x)² * x
Now plug in the given Ksp value (6.6 x 10^-12):
6.6 x 10^-12 = (4x^3)
To find x, the solubility of M2Z:
x = (6.6 x 10^-12 / 4)^(1/3)
x ≈ 1.3 x 10^-4 M

So, the solubility of M2Z in mol/L is approximately 1.3 x 10^-4 M. The correct answer is b. 1.2 x 10^-4 M, as it is the closest option to the calculated value.

Learn more about ksp : https://brainly.com/question/27964828

#SPJ11

Based on the hint in Q1.2, MgBr2·OEt2 is likely a Lewis acid. In organic chemistry, Lewis acids are electron pair acceptors, meaning that they can accept a pair of electrons from another molecule. MgBr2·OEt2 is often used as a Lewis acid to activate carbonyl compounds, allowing them to react with nucleophiles such as Grignard reagents

MgBr2·OEt2, also known as magnesium diethyl etherate, plays the role of a Lewis acid in many chemical reactions. In particular, it is commonly used as a co-catalyst or activator in reactions involving Grignard reagents, which are themselves powerful nucleophiles and bases.The Grignard reagent is typically prepared by reacting an organic halide with magnesium metal in the presence of an ether solvent such as diethyl ether. However, the reaction is often slow and inefficient without the addition of a Lewis acid such as MgBr2·OEt2. This is because the magnesium halide that is formed during the reaction tends to coat the surface of the magnesium metal, hindering further reaction.

In addition to its role as a catalyst for Grignard reactions, MgBr2·OEt2 can also act as a promoter or co-catalyst in a variety of other chemical reactions. For example, it is commonly used in the preparation of organometallic compounds, as well as in the synthesis of a range of pharmaceuticals and other organic compounds.

Click the below link, to learn more about Lewis Acids:

https://brainly.com/question/15570523

#SPJ11

We can simplify the equation to: [tex]Ka = [H+][CH3COO-] / [CH3COOH[/tex]

Why are calculated after 25.0 ml of the titrant is added?

The titration of acetic acid ([tex]CH3COOH[/tex]) with sodium hydroxide ([tex]NaOH[/tex]) is a common acid-base titration. At the equivalence point of the titration, all of the acetic acid has been neutralized by the sodium hydroxide, resulting in a solution of sodium acetate ([tex]CH3COO-Na+[/tex]) and water.

To calculate the pH after 25.0 mL of 0.1 M [tex]NaOH[/tex] has been added to 25.0 mL of 0.1 M [tex]CH3COOH[/tex], we need to determine how much acetic acid has been neutralized by the [tex]NaOH[/tex]. At the equivalence point, the moles of [tex]NaOH[/tex] added will be equal to the moles of [tex]CH3COOH[/tex] present in the initial solution. We can use the following equation to determine the moles of [tex]CH3COOH[/tex] present in the initial solution:

moles [tex]CH3COOH[/tex] = (volume of [tex]CH3COOH[/tex]) x (molarity of [tex]CH3COOH[/tex])

moles [tex]CH3COOH[/tex] = (25.0 mL) x (0.1 mol/L) / 1000 mL/L

moles [tex]CH3COOH[/tex] = 0.00250 mol

At the equivalence point, the moles of [tex]NaOH[/tex] added will also be 0.00250 mol. We can use this information to determine the volume of [tex]NaOH[/tex] required to reach the equivalence point:

moles [tex]NaOH[/tex] = (volume of [tex]NaOH[/tex]) x (molarity of [tex]NaOH[/tex])

0.00250 mol = (volume of [tex]NaOH[/tex]) x (0.1 mol/L)

volume of [tex]NaOH[/tex] = 0.0250 L = 25.0 mL

Therefore, 25.0 mL of 0.1 M [tex]NaOH[/tex] is required to reach the equivalence point.

To calculate the pH after 25.0 mL of NaOH has been added, we need to determine how much [tex]CH3COOH[/tex] remains in the solution. This can be done using the following equation:

moles [tex]CH3COOH[/tex] remaining = moles [tex]CH3COOH[/tex]initial - moles [tex]NaOH[/tex]added

moles [tex]CH3COOH[/tex] remaining = 0.00250 mol - 0.00250 mol

moles [tex]CH3COOH[/tex] remaining = 0 mol

This indicates that all of the [tex]CH3COOH[/tex] has been neutralized by the [tex]NaOH[/tex], and we are left with a solution of sodium acetate (CH3COO-Na+) and water.

To calculate the pH of the resulting solution, we need to determine the concentration of the acetate ion ([tex]CH3COO-[/tex]) in the solution. At the equivalence point, the moles of [tex]CH3COO-[/tex] will be equal to the moles of NaOH added:

moles [tex]CH3COO-[/tex] = moles NaOH  added

moles [tex]CH3COO-[/tex] = 0.00250 mol

We can use this information to calculate the concentration of [tex]CH3COO-[/tex] in the solution:

concentration of [tex]CH3COO-[/tex] = moles [tex]CH3COO-[/tex]/ volume of solution

concentration of [tex]CH3COO-[/tex] = 0.00250 mol / 50.0 mL

concentration of [tex]CH3COO-[/tex] = 0.0500 M

The pH of the solution can be calculated using the dissociation constant (Ka) of acetic acid:

[tex]Ka = [H+][CH3COO-] / [CH3COOH][/tex]

Since all of the [tex]CH3COOH[/tex] has been neutralized, the concentration of [tex]CH3COOH[/tex] in the solution is 0 M. Therefore, we can simplify the equation to:

[tex]Ka = [H+][CH3COO-] / [CH3COOH[/tex]

Learn more about equation

brainly.com/question/29538993

#SPJ11

In the dehydration reaction of 2-methylcyclohexanol, the primary role of the acid catalyst is b. to generate a better leaving group. The acid catalyst protonates the hydroxyl group, converting it into a better leaving group (water) and facilitating the elimination reaction that leads to alkene formation

The primary role of the acid catalyst in the dehydration reaction of 2-methylcyclohexanol is to generate a better leaving group. The acid catalyst protonates the hydroxyl group of the alcohol, making it a better leaving group as water. This results in the formation of a carbocation intermediate, which then leads to alkene formation. Therefore, option B is the correct answer. The acid catalyst does not neutralize base formed during the reaction, enhance solubility of polar intermediates, or deprotonate the carbocation intermediate.

Learn more about dehydration reaction here:

https://brainly.com/question/29262706

.#SPJ11

The molecular geometry of a molecule with 5 outer atoms and 1 lone pair on the central atom is trigonal bipyramidal.

To provide an explanation, the arrangement of the outer atoms and lone pair around the central atom follows the VSEPR (Valence Shell Electron Pair Repulsion) theory, which states that electron pairs in the valence shell of an atom will repel each other and try to get as far apart as possible.

In this case, the central atom has 6 electron pairs (5 from the outer atoms and 1 lone pair) and they will arrange themselves in a way that maximizes their distance from each other. The trigonal bipyramidal geometry allows for the electron pairs to be as far apart as possible while still maintaining a stable structure.

By visualizing the molecule in 3D space. The central atom will be located in the center of two three-atom planes (one above and one below) that are arranged in a triangular shape. The lone pair will occupy one of the two axial positions that are perpendicular to the triangular plane. This geometry allows for the maximum distance between electron pairs and results in a stable molecule.

However, since there is 1 lone pair, the molecular geometry will be different from the electron geometry. The lone pair will occupy one of the positions in the octahedral arrangement, while the 5 outer atoms will occupy the remaining positions, forming a square pyramid. In a square pyramidal geometry, the central atom is connected to four outer atoms in a square plane, with the fifth outer atom positioned above or below the plane. This arrangement minimizes electron repulsion, resulting in a stable molecular geometry.

To know more about VSEPR refer to

https://brainly.com/question/31162132

#SPJ11

1. Increasing the conductivity of the solution, 2. NH₃ (aq) + CH₃COOH (aq) ⇒CH₃COONH₄ (aq), 3. Conduct electricity decreases.

1. When ammonia (NH₃) and acetic acid (CH₃COOH) are mixed, they form a salt called ammonium acetate (CH₃COONH₄), which is a strong electrolyte. The mixture behaves as a strong electrolyte because the ammonium ion (NH₄⁺) and the acetate ion (CH₃COO⁻) formed are highly soluble in water and dissociate completely, increasing the conduction of the solution.
2. The reaction that occurs when ammonia and acetic acid are mixed is:
NH₃ (aq) + CH₃COOH (aq)  ⇒ CH₃COONH₄ (aq)
3. When you added a pinch of NaCl to a beaker and then added progressively more water, the light gets dimmer and dimmer because the concentration of the electrolyte (NaCl) in the solution decreases. As the concentration decreases, the number of ions available to conduct electricity also decreases, resulting in less light being produced by the bulb.

Learn more about conduction here

https://brainly.com/question/31201773

#SPJ11

The mass percent of acetic acid in the vinegar solution is approximately 3.99% in a vinegar solution with a total mass of 97.06 g that contains 3.87 g of acetic acid.

To calculate the mass percent of acetic acid in the vinegar solution, follow these steps:
1. Identify the mass of acetic acid (3.87 g) and the total mass of the solution (97.06 g).
2. Divide the mass of acetic acid by the total mass of the solution: 3.87 g / 97.06 g.
3. Multiply the result by 100 to convert the ratio to a percentage.
Using the provided data, the calculation is:
(3.87 g acetic acid / 97.06 g solution) × 100 = 3.99%

To learn more about mass percent click here https://brainly.com/question/5394922

#SPJ11

The oxidizing agent is a substance that gains electrons during a redox reaction, causing another substance to lose electrons and be oxidized.

In this case, the half-reaction with the highest E° value is[tex]Y_{2} +(aq) + 2e^{-}  =Y(s)[/tex]with an E° of 1.49, indicating that [tex]Y^{2+}[/tex]is the strongest oxidizing agent. This is because it has the highest tendency to gain electrons and be reduced. On the other hand, X(s) has the lowest E° value of 0.70, making it the strongest reducing agent, as it has the highest tendency to lose electrons and be oxidized. In summary, the oxidizing agent in this reaction is [tex]Y^{2+}[/tex] while the reducing agent is X. It's important to note that these values are used to predict the direction of a redox reaction and are based on standard conditions. In non-standard conditions, the actual potential difference may vary.

To know more about oxidizing agent :

https://brainly.com/question/10547418

#SPJ11

Olive oil and safflower oil showed red-orange (bromine) color disappears, indicating that they were also unsaturated compounds.

In Table LI.6, the analysis of unsaturation test was conducted using bromine to determine whether the tested samples were saturated or unsaturated. The test was conducted on several samples including stearic acid, oleic acid, olive oil, and safflower oil.

Stearic acid resulted in all red-orange (bromine) color persists, indicating that it was a saturated compound. Oleic acid, on the other hand, resulted in red-orange (bromine) color disappears, indicating that it was an unsaturated compound. Similarly, both olive oil and safflower oil showed red-orange (bromine) color disappears, indicating that they were also unsaturated compounds.

In conclusion, the analysis of unsaturation test using bromine was successful in distinguishing between saturated and unsaturated compounds. Oleic acid, olive oil, and safflower oil were all identified as unsaturated compounds based on their reactions with bromine.

Learn more about Olive and safflower oil

brainly.com/question/14944639

#SPJ11

The value of ∆H°vaporization of the diethyl ether is approximately 26.24 kJ/mol.

To calculate the ΔH°vaporization (enthalpy of vaporization) of diethyl ether, we can use the Clausius-Clapeyron equation:

ln(P₁/P₂) = (ΔH°vaporization/R) * (1/T₂ - 1/T₁)

In this case,
Normal boiling point (T₁) = 34.6 °C = 307.75 K (convert to Kelvin by adding 273.15)
Boiling point at 100 mm Hg (T₂) = -1.5 °C = 271.65 K
P₁ = 760 mm Hg (normal atmospheric pressure)
P₂ = 100 mm Hg
R = 8.314 J/(mol*K) (gas constant)

Plugging in the values:

ln(760/100) = (ΔH°vaporization/8.314) * (1/271.65 - 1/307.75)

Solve for ΔH°vaporization:

ΔH°vaporization ≈ 26.24 kJ/mol

Therefore, the value of ΔH°vaporization for diethyl ether is approximately 26.24 kJ/mol.

Learn more about Clausius-Clapeyron equation here: https://brainly.com/question/29414397

#SPJ11

The value of ∆H°vaporization of the diethyl ether is approximately 26.24 kJ/mol.

To calculate the ΔH°vaporization (enthalpy of vaporization) of diethyl ether, we can use the Clausius-Clapeyron equation:

ln(P₁/P₂) = (ΔH°vaporization/R) * (1/T₂ - 1/T₁)

In this case,
Normal boiling point (T₁) = 34.6 °C = 307.75 K (convert to Kelvin by adding 273.15)
Boiling point at 100 mm Hg (T₂) = -1.5 °C = 271.65 K
P₁ = 760 mm Hg (normal atmospheric pressure)
P₂ = 100 mm Hg
R = 8.314 J/(mol*K) (gas constant)

Plugging in the values:

ln(760/100) = (ΔH°vaporization/8.314) * (1/271.65 - 1/307.75)

Solve for ΔH°vaporization:

ΔH°vaporization ≈ 26.24 kJ/mol

Therefore, the value of ΔH°vaporization for diethyl ether is approximately 26.24 kJ/mol.

Learn more about Clausius-Clapeyron equation here: https://brainly.com/question/29414397

#SPJ11

The fusion of hydrogen would yield more energy than the fission of uranium. Option B.

While both processes release large amounts of energy, fusion reactions involve the combination of light atomic nuclei, such as hydrogen, to form heavier nuclei, such as helium. In contrast, fission reactions involve the splitting of heavy atomic nuclei, such as uranium or plutonium, into lighter fragments.

Fusion reactions can release more energy per unit mass than fission reactions because they involve the conversion of a small fraction of the mass into energy according to Einstein's famous equation.

Additionally, fusion reactions produce much less radioactive waste than fission reactions, making fusion a potentially cleaner and more sustainable source of energy. However, fusion is currently a more difficult process to achieve and sustain compared to fission, as it requires very high temperatures and pressures to overcome the natural repulsion between positively charged atomic nuclei.

To learn more about fusion, click here:

https://brainly.com/question/11395223

#SPJ11

Ranking ions from largest to smallest:

Na^+ (11 protons), Mg^2+ (12 protons), F^- (9 protons), O^2- (8 protons), Al^3+ (13 protons)

The given isoelectronic series in order of decreasing radius, from largest to smallest. The given ions have the same number of electrons, but different numbers of protons, which affect the radius of the ion. The more protons an ion has, the greater the attraction between the nucleus and the electrons, which leads to a smaller radius. Therefore, to arrange the ions in order of decreasing radius, we need to consider the number of protons in each ion.

In this case, the ion with the fewest protons is Al^3+ with 13 protons, which will have the smallest radius. The largest ion will be the one with the least attractive force on the electrons. That would be Na^+ with 11 protons. Between these two, we have Mg^2+ with 12 protons, which will have a larger radius than Al^3+ but a smaller radius than Na^+. The two anions, F^- and O^2-, have fewer protons than the cations and are thus larger. Therefore, the order of decreasing radius from largest to smallest is:
Na^+ (11 protons), Mg^2+ (12 protons), F^- (9 protons), O^2- (8 protons), Al^3+ (13 protons)

Know more about Ions here:

https://brainly.com/question/10942834

#SPJ11

Therefore, the depth at which the pressure is twice the atmospheric pressure in a fluid of density p with its surface exposed to the atmosphere is given by the expression 2Po/(pg), where Po is the atmospheric pressure.

The depth at which the pressure is twice the atmospheric pressure in a fluid of density p with its surface exposed to the atmosphere can be calculated using the following expression: P = pgh where P is the pressure at a depth h, p is the density of the fluid, g is the acceleration due to gravity, and h is the depth. Since we want the pressure to be twice the atmospheric pressure, we can set P = 2Po, where Po is the atmospheric pressure. 2Po = pgh Solving for h, we get:h = 2Po/(pg)

Therefore, the depth at which the pressure is twice the atmospheric pressure in a fluid of density p with its surface exposed to the atmosphere is given by the expression 2Po/(pg), where Po is the atmospheric pressure.

Learn more about atmosphere here:https://brainly.com/question/24925283

#SPJ11

The product for the intramolecular aldol reaction (with dehydration) of 2,5-hexanedione is 3,5-dimethyl-2-cyclopentenone.

To draw the product, follow these steps:

1. Identify the reactive sites: The alpha-carbon (next to carbonyl groups) of 2,5-hexanedione can act as a nucleophile, and the carbonyl group can act as an electrophile.

2. Formation of enolate: Deprotonate the alpha-carbon of the less hindered carbonyl group to form an enolate anion.

3. Intramolecular aldol reaction: The enolate anion attacks the carbonyl group of the other ketone, forming a 5-membered ring and an alcohol.

4. Dehydration: The alcohol formed in the aldol reaction loses a water molecule  to form a double bond, resulting in a conjugated enone.

The final product is 3,5-dimethyl-2-cyclopentenone, a 5-membered ring with a conjugated enone system.

To know more about aldol reaction click on below link:

https://brainly.com/question/29857280#

#SPJ11

The final temperature of the mixture is 36.4°C. This answer is reasonable.

To calculate the final temperature, we use the formula for heat exchange:
mass1 × specific heat capacity × (Tfinal - Tinitial1) = - (mass2 × specific heat capacity × (Tfinal - Tinitial2))

Since water has a specific heat capacity of 4.18 J/g°C, we can convert the given volumes to masses, assuming a density of 1 g/mL:
mass1 = 50.0 mL × 1 g/mL = 50.0 g
mass2 = 40.0 mL × 1 g/mL = 40.0 g

Plugging the values into the formula:
50.0 g × 4.18 J/g°C × (Tfinal - 10.0°C) = - (40.0 g × 4.18 J/g°C × (Tfinal - 65.0°C))

Solving for Tfinal, we get 36.4°C. This answer is reasonable because the final temperature falls between the initial temperatures of both water samples, and the temperature difference between the two samples is accounted for in the heat exchange calculation.

To know more about specific heat capacity click on below link:

https://brainly.com/question/29766819#

#SPJ11

The compound that, when added to a saturated solution of AgCl(s), will cause additional AgCl to precipitate is a. NaCl.

When NaCl is added to the saturated AgCl solution, it provides an excess of Cl⁻ ions. According to the common ion effect, this increase in Cl⁻ ion concentration will shift the solubility equilibrium of AgCl (AgCl(s) ⇌ Ag⁺(aq) + Cl⁻(aq)) to the left, resulting in the precipitation of more AgCl.

In contrast, HNO₃ and NaNO₃ do not supply Cl⁻ ions and will not cause additional AgCl precipitation.

To know more about common ion effect click on below link:

https://brainly.com/question/28202991#

#SPJ11

Answer:

(A) with an oxidation number of +2 and an anion

Explanation:

Answer:

A+2B-3 is the predicted formula when each metal cation has a charge of +2 and each non metal has a charge of -3

B2A3 is the final formula for the metal anion bonding to the non-metal cation in a 2:3 ratio.

A3B2 is the predicted formula with an overall charge of the compound being zero and each atom has 8 valence electrons in their outermost electron shell.

A3B2 is the predicted formula is made when each metal cation gains three electrons from the anion while each nonmetal loses 2 electrons to each of the cations.

Answer: The volume of the gas sample at 760 mmHg and 35°C is 496.8 mL

Explanation: To solve this problem, we can use the combined gas law, which states that the pressure, volume, and temperature of a gas are related.

Using the formula, P1V1/T1 = P2V2/T2, we can substitute the given values to find the volume of the gas at the new conditions.

First, we need to convert the temperatures to Kelvin by adding 273.15 to each. So, T1 = 289.15 K and T2 = 308.15 K.

Now, we can substitute the given values:

740 mmHg * 450.0 mL / 289.15 K = 760 mmHg * V2 / 308.15 K

Simplifying this equation, we get V2 = (740 mmHg * 450.0 mL * 308.15 K) / (760 mmHg * 289.15 K)

Solving for V2, we get V2 = 496.8 mL.

Therefore, the volume of the gas sample at 760 mmHg and 35°C is 496.8 mL.

To learn more about gas laws and related problems, check out this verified answer on Brainly:

https://brainly.com/question/31746813

The average rate of disappearance of CH₃NC between 0 and 600 seconds is 0.77 torr/s (Option D).

To calculate the average rate of disappearance of CH₃NC between 0 and 600 seconds, we need to use the following formula:

Average rate = (change in pressure of CH₃NC)/(time interval)

From the given data, we can see that the pressure of CH₃NC decreases as time increases, which indicates that the isomerization reaction is taking place. Therefore, we need to calculate the change in pressure of CH₃NC between 0 and 600 seconds:

Change in pressure = (pressure at 0 seconds) - (pressure at 600 seconds)

= 620 - 158

= 462 torr

Now, we can calculate the average rate of disappearance of CH₃NC:

Average rate = (change in pressure)/(time interval)

= 462/600

= 0.77 torr/s

Therefore, the average rate of disappearance of CH₃NC between 0 and 600 second is 0.77 torr/s.

Learn more about average rate of disappearance: https://brainly.com/question/14919490

#SPJ11

From the calculations below the quantity of heat absorbed is 74789 joules

We know that the expression for the quantity of heat is given as

Q = MCΔT --------------------1

Substituting our given data into the expression we have

Q = 325*4.184(70-15)

Q = 325*4.184(55)

Q = 74,789 Joules

Learn more about specific heat capacity here:

https://brainly.com/question/27991746

#SPJ1

The balanced chemical equation for the reaction is:

6 FeSO4 + K2Cr2O7 + 7 H2SO4 → 3 Fe2(SO4)3 + Cr2(SO4)3 + K2SO4 + 7 H2O

From the balanced equation, we see that the stoichiometric ratio of K2Cr2O7 to FeSO4 is 1:6. Therefore, we can use the following equation to calculate the amount of K2Cr2O7 needed:

moles of K2Cr2O7 = Molarity × Volume × n

where n is the stoichiometric coefficient of K2Cr2O7 in the balanced equation, which is 1.

Plugging in the values we get:

moles of FeSO4 = 0.250 M × 60.0 mL × (1/1000) L/mL = 0.015 mol FeSO4

moles of K2Cr2O7 needed = 0.015 mol FeSO4 × (1 mol K2Cr2O7/6 mol FeSO4) = 0.0025 mol K2Cr2O7

Now we can use the same equation with the molarity and moles to calculate the volume of K2Cr2O7 needed:

0.0025 mol K2Cr2O7 = 0.175 M × Volume × 1

Volume = 0.0025 mol / 0.175 M = 0.0143 L = 14.3 mL

Therefore, the volume of 0.175 M K2Cr2O7 needed to oxidize 60.0 mL of 0.250 M FeSO4 is 14.3 mL. The answer is (A) 14.3.

learn more abouT potential  here:

https://brainly.com/question/24142403

#SPJ4