Answer:
B. 7 people
Step-by-step explanation:
If you multiply 8x16 you get: 128. Then you subtract 135 from 128 and get: 7. Therefore, 7 people will not be able to go if they only rent 16 minivans.
Test for equality of population means against the alternative that the means are different assuming normality, choosing ? 5% and using two samples of sizes 12 and 18, with mean 10 and 14, respectively, and equal standard deviation 3.
The p-value (0.0208) is less than the significance level (0.05), we reject the null hypothesis. This indicates that there is sufficient evidence to suggest the case.
Null hypothesis (H0): The population means are equal, μ1 = μ2.
Alternative hypothesis (Ha): The population means are different, μ1 ≠ μ2.
Select the significance level (α): In this case, α = 0.05.
Now, The test statistic for a two-sample t-test is given by:
t = (sample mean 1 - sample mean 2) / √((s1² / n1) + (s2² / n2))
where s1 and s2 are the sample standard deviations, and n1 and n2 are the sample sizes.
Here X₁ = 10, X₂ = 14, s= 3, n₁ =12, n₂ = 18
So, t= (10-14) / √(3²/12) + (3²/18) et:
t= (-4)/ √(3/4 + 1/2)
t= -4 / (5/4)
t= -2.7931
Now, degrees of freedom (df):
= (9/12 + 9/18)² / (((9/12)² / 11) + ((9/18)² / 17))
= 25.164
So, the p value will be 0.0208.
As, p-value is less than α (0.0208 < 0.05), we reject the null hypothesis.
Since the p-value (0.0208) is less than the significance level (0.05), we reject the null hypothesis. This indicates that there is sufficient evidence to suggest the case.
Learn more about Hypothesis test here:
https://brainly.com/question/17099835
#SPJ4
algebra if x/y = 5/8 which of the following must be true?
can someone please help me pls
Answer:
The answer is 21 units²
Step-by-step explanation:
To find the area of a right triangle you use the formula A=ab/2
So
A=6×7/2 = 21
Please help me with the
Answer: i think its 10
Step-by-step explanation:
In 20 seconds, a roller coaster goes up a 100-meter hill, then down 72 meters and then back up a 48-meter rise. what integer represents the vertical change from the start of the ride for the coaster after the 20 seconds
This is the answer
I hope if you get it correct or right
Good luck everyone
The total vertical change from the start of the ride for the roller coaster after the 20 seconds 76 m.
What is vertical change?The rise is the vertical difference between two points called vertical change.
Calculation for the vertical change:Step 1: Calculation for the the total rise when roller coaster goes up a 100 meter hill and the down 72 meter.Thus, the total vertical rise will be,
100 (upward) - 72 (downward) = 28(upward)
Step 2: Calculation for the total rise after the roller coaster again goes vertical to 48 meter.So, the total rise will become,
28(upward) + 48(upward) = 76(upward)
Therefore, the total vertical rise of the roller is 76 meter during the time of 20 seconds.
To know more about the vertical line test, here
https://brainly.com/question/2257047
#SPJ2
Discrete math
Euclidean Algorithm (a) Find the Greatest Common Divisor of 27,720 and 58,212 (b) Find integers r and s so that 27720-5 + 58212.5 = GCD(27720, 58212) =
a) The GCD of 27,720 and 58,212 is 1.
b) Integers r = 3 and s = -1 satisfy the equation 27720r + 58212s = GCD(27720, 58212).
How to find the greatest common divisor (GCD) of 27,720 and 58,212?(a) To find the greatest common divisor (GCD) of 27,720 and 58,212, we can use the Euclidean Algorithm.
Divide 58,212 by 27,720.
58,212 ÷ 27,720 = 2 remainder 2
Divide the previous divisor (27,720) by the remainder (2).
27,720 ÷ 2 = 13,860
Divide the previous remainder (2) by the new remainder (2).
2 ÷ 2 = 1
Since the remainder is now 1, the GCD is found.
Therefore, the greatest common divisor (GCD) of 27,720 and 58,212 is 1.
How to find integers r and s such that 27720r + 58212s = GCD(27720, 58212)?(b) To find integers r and s such that 27720r + 58212s = GCD(27720, 58212), we can use the Extended Euclidean Algorithm.
Using the Euclidean Algorithm from part (a), we can backtrack to find the coefficients r and s:
2 = 27,720 - 13,860
Substituting the values:
2 = 27,720 - (58,212 - 2 * 27,720)
Simplifying:
2 = 3 * 27,720 - 58,212
Comparing with the form 27720r + 58212s = GCD(27720, 58212):
r = 3
s = -1
Therefore, we substitute r = 3 and s = -1 into the equation 27720r + 58212s, it will result in the greatest common divisor (GCD) of 27720 and 58212.
Learn more about Euclidean Algorithm
brainly.com/question/32265260
#SPJ11
A researcher checks different times that students take to complete an IQ test. The Samples are from different states. Please check if their means are significantly different or the difference is just by chance. Significance level is 5%. The premise is that the ANOVA assumption of normality and homogeneity of variance has been satisfied.
If we fail to reject the null hypothesis, we cannot conclude that the means are significantly different.
To check whether the means of the samples from different states are significantly different or if the difference is just by chance, we can use the one-way analysis of variance (ANOVA).
The premise is that the ANOVA assumption of normality and homogeneity of variance has been satisfied.
Here, the null hypothesis is that the means of all the samples are equal while the alternative hypothesis is that at least one mean is different.
The significance level is 5%.
To perform the ANOVA test, we can follow these steps:
Step 1: State the null and alternative hypotheses
H0: μ1 = μ2 = μ3 = ... = μk (where k is the number of groups)
Ha: At least one mean is different
Step 2: Set the significance level (α)α = 0.05
Step 3: Calculate the test statistic
The test statistic used in ANOVA is the F-statistic, which is the ratio of the between-group variance to the within-group variance.
If the F-statistic is large and the p-value is less than the significance level, we can reject the null hypothesis and conclude that at least one mean is different. If the F-statistic is small and the p-value is greater than the significance level, we fail to reject the null hypothesis and conclude that the means are not significantly different.
Step 4: Calculate the p-value
Using the F-statistic and the degrees of freedom for the between-group and within-group variance, we can calculate the p-value. If the p-value is less than the significance level, we can reject the null hypothesis. If the p-value is greater than the significance level, we fail to reject the null hypothesis.
Step 5: State the conclusion
Based on the p-value, we can either reject or fail to reject the null hypothesis. If we reject the null hypothesis, we can conclude that at least one mean is different. If we fail to reject the null hypothesis, we cannot conclude that the means are significantly different.
To learn more about ANOVA
https://brainly.com/question/15084465
#SPJ11
OMG PLS HELP WITH THIS IM PANICKING OMG I GOT A F IN MATH MY MOM JUST YELLED AT ME IM CRYING PLS HELP WITH THS- PLSS TELL ME WHAT TO DRAW
Answer:
The answer to this question is $14,916
Step-by-step explanation:
18,469 - 3,553 = 14916
As he already has money for the car.
A bar model is shown in the linked picture.
PLEASE PLEASE PLEASE HELP
WITH 2D AND 3A ONLY, PLEASE SHOW YOUR WORKING
Answer:
2d) d = 60°
3a) x = 50°
Step-by-step explanation:
2d) both of the diagonals pass through the centre of the circle and divide the rectangle into 4 triangles,then it means that;
30 + d = 90°
d = 90 - 30
d = 60°
3a) since O is the centre of the circle, and we can see that the 2 chords directly above and below the centre are parallel to each other, it means that angle x = 50° since the two sides projecting from the centre to form x° and 50° are equal and in essence used to form isosceles triangle.
(a) For the same data and null hypothesis, is the P-value of a one-tailed test (right or left) larger or smaller than that of a two-tailed test? Explain.
The P-value for a one-tailed test is larger because the two-tailed test includes the area in both tails. The P-value for a one-tailed test is smaller because the two-tailed test includes the area in only one tail. The P-value for a one-tailed test is smaller because the two-tailed test includes the area in both tails. The P-value for a one-tailed test is larger because the two-tailed test includes the area in only one tail.
The P-value of a one-tailed test is generally smaller than that of a two-tailed test when testing the same null hypothesis and using the same level of significance.
The P-value of a one-tailed test is generally smaller than that of a two-tailed test when testing the same null hypothesis and using the same level of significance. This is because a one-tailed test focuses on a specific direction of the hypothesis, while a two-tailed test considers both directions.
In a one-tailed test, the null hypothesis is rejected only if the test statistic falls in the critical region in one direction. For example, if the null hypothesis is that a mean is less than or equal to a certain value, the critical region will be in the lower tail of the distribution. Therefore, the probability of obtaining a test statistic in the critical region is smaller compared to a two-tailed test, where the critical region is split between both tails of the distribution.
As a result, the P-value of a one-tailed test is smaller than that of a two-tailed test, given the same null hypothesis and level of significance. However, it's important to note that the choice between a one-tailed or two-tailed test should be based on the specific research question, rather than the desire for a smaller P-value.
Visit to know more about P-value:-
brainly.com/question/4621112
#SPJ11
Solve the inequality
*
2x^2+ 5x – 3 < 0.
Answer:
heres the answer I think
Step-by-step explanation:
-3 < x < 1/2
what percent of 15 is 0.6?
Answer:
4 is a percent of 15 is 0.6
Step-by-step explanation:
if you out 15/0.6 as a fraction you will get 4
Answer:
4%
Step-by-step explanation:
STEP 1: Put the numbers into a fraction
0.6/15
STEP 2: Divide
0.6/15 = 0.04
STEP 3: Move decimal point two places to the right
0.04 -> 4
Answer: 4%
an icecube has a mass of 18g and a volume of 20cm3 what is the density
Answer:
.9 g/cm^3
Step-by-step explanation:
density formula is mass divided by volume.
d=m/v
d=18g/20cm^3
d=0.9
What is the sum of 10/12and 11/12? Make sure to show all work to receive full credit!
Answer:
[tex]1\frac{3}{4}[/tex]
Step-by-step explanation:
[tex]\frac{10}{12} +\frac{11}{12} \\\\\frac{21}{12} \\\\1\frac{9}{12} \\\\1\frac{3}{4}[/tex]
please help me do it
Dwayne buys ingredients to make a cake. He buys 1 1/2 pounds of flour, 12 ounces of coconut, and 1 1/4 pounds of sugar. What is the total weight of the ingredients Dwayne bought?
Answer:
56 oz or 3 1/2 lbs
Step-by-step explanation:
1 1/4 + 1 1/2 = 2 3/4lbs = 44 oz
44 oz + 12 oz = 56 oz
Answer:
81/4
Step-by-step explanation:
the answer is not sure
Estimate the area under the graph of f(x) =10 sqrt x from x = 0 to x = 4 using four approximating rectangles and right endpoints. (Round your answers to four decimal places.)
(a) Use four approximating rectangles and right endpoints.
R4=______________________
(b) Use four approximating rectangles and left endpoints.
L4=_______________________
(a) R4= 61.4626 and (b) L4= 61.4626.
In order to estimate the area under the graph of f(x) = 10 sqrt x from x = 0 to x = 4 using four approximating rectangles and right endpoints, we need to use the formula:
Rn = Δx [f(x1) + f(x2) + f(x3) + ... + f(xn)], where Δx is the width of each rectangle and f(xi) is the height of the rectangle at the right endpoint of the ith interval.
Step 1: Calculation of ∆x.∆x = (4 - 0)/4 = 1
Step 2: Calculation of xi for i = 1, 2, 3 and 4.x1 = 1, x2 = 2, x3 = 3, x4 = 4
Step 3: Calculation of f(xi) for i = 1, 2, 3 and 4.f(x1) = 10√(1) = 10f(x2) = 10√(2) ≈ 14.1421f(x3) = 10√(3) ≈ 17.3205f(x4) = 10√(4) = 20
Step 4: Calculation of R4.R4= ∆x [f(x1) + f(x2) + f(x3) + f(x4)]R4= 1[10 + 14.1421 + 17.3205 + 20]= 61.4626Area ≈ 61.4626 square units.
Step 5: Calculation of L4.Ln = ∆x [f(x0) + f(x1) + f(x2) + ... + f(xn-1)]
Where x0 is the initial value.
Here, we can find the value of L4 by using the left endpoints.
So, x0 = 0L4 = ∆x [f(x0) + f(x1) + f(x2) + f(x3)]L4 = 1 [f(0) + f(1) + f(2) + f(3)]L4 = 1 [10 + 14.1421 + 17.3205 + 20]L4 = 61.4626
Therefore, (a) R4= 61.4626 and (b) L4= 61.4626.
Know more about rectangles here,
https://brainly.com/question/29123947
#SPJ11
Help me please!!!!!!
Method begins with a matrix or table describing the characteristics of a target population? a. probability b. snowball c. quota d. simple random sampling
The method that begins with a matrix or table describing the characteristics of a target population is quota sampling.
Quota sampling is a non-probability sampling method in which the researcher first creates a matrix or table describing the characteristics of the target population. Once the matrix is created, the researcher then selects a certain number of people from each category in the matrix until the desired sample size is reached.
For example, if the researcher is interested in studying the political views of college students, they might create a matrix with the following categories:
Gender: Male, Female
Age: 18-21, 22-25, 26-30
Political affiliation: Democrat, Republican, Independent
Once the matrix is created, the researcher might then select 100 students from each category, for a total sample size of 300.
Quota sampling is a quick and easy way to obtain a sample of a population. However, it is not a probability sampling method, which means that the sample may not be representative of the population. This is because the researcher is not randomly selecting participants from the population. Instead, they are selecting participants based on their characteristics.
As a result, quota sampling can lead to bias in the results of a study. For example, if the researcher selects more students from one political affiliation than another, the results of the study may be biased in favor of that political affiliation.
Overall, quota sampling is a useful tool for researchers who need to obtain a sample of a population quickly and easily. However, it is important to be aware of the limitations of this method and to take steps to minimize bias in the results of the study.
Learn more about matrix here:
https://brainly.com/question/29132693
#SPJ11
Can somebody help me with that ?
Answer:
a complementary angle adds up to 90 degrees.So 90 minus 64 and the measure of the other angle is 26
Step-by-step explanation:
Hope it helped ;)
A large box of cereal has 26.8 ounces costs $5.79. A small box of the same cereal has 19 ounces and costs 4.19. Which box of cereal is the better buy
Answer:
A small box of the same cereal has 19 ounces and costs 4.19.
Step-by-step explanation:
In the first case, you have $3.37 per 15.3 ounces
Thus take 3.37 / 15.3 and you get $0.2203 per ounce or 22 cents per ounce
In the second case, you have $4.59 per 20 ounces
Thus take 4.59 / 20 and you get $0.2295 per ounce or almost 23 cents per ounce
So the smaller box actually has a slightly cheaper cost per ounce associated with it.
Determine the surface area of a cereal box with these dimensions width: 3 inches length: 8 inches height: 12 inches
can someone help plz ... mark brainliest ❤️
Answer:
Top:(4r⁹+3r³-5)
Bottom: r⁵
Step-by-step explanation:
on the 3-days of their vacation the Davis family traveled 417 mi 45.3 mi and 366.9 mi how far did they travel all together
Answer:
829.2 miles
Step-by-step explanation:
To find how far they traveled in total, add together all of the distances:
417 + 45.3 + 366.9
= 829.2
So, all together, they traveled 829.2 miles
can someone help me I’m stuck on this and can’t figure it out
Answer:
20%
Step-by-step explanation:
Answer:
20%
Step-by-step explanation:
19.99 - 3.998(20%) = 15.992 which when rounded is 15.99
i need help please explain to me the answer !
Answer:
If the triangle is similar then their ratio is also same
x = 8
6 4.8
X =8×6
4.8
x = 10 cm
hope this helps
good day mate
Can someone help me pls I’m stuck on both problems
Answer:
171
Step-by-step explanation:
6x6x4.75 is 171
Find a primitive root, for all positive integral m, modulo each integer below. (a) 7 (Hint: Using Corollary 5.15, find a common primitive root r modulo 7 and 72. The proof of Proposition 5.17 then guarantees that r is a primitive root modulo 7" for all positive integral m.) (b) 11m (c) 13m (d) 17m
To find a primitive root modulo a given integer, we can use Corollary 5.15 and Proposition 5.17. For (a) 7, a common primitive root r can be found by using these results. Similarly, for (b) 11m, (c) 13m, and (d) 17m, the same approach can be applied to find primitive roots modulo each integer.
(a) To find a primitive root modulo 7 and 72, we can use Corollary 5.15, which states that if r is a primitive root modulo n, then r is also a primitive root modulo any power of n. Since 7 is a prime number, we can easily find a primitive root modulo 7. Let's say r is a primitive root modulo 7. Using Proposition 5.17, which guarantees that a primitive root modulo a prime number remains a primitive root modulo any positive integral power of the prime, we can conclude that r is a primitive root modulo 7 for all positive integral m.
(b) Similarly, for 11m, we can find a primitive root modulo 11 and use Proposition 5.17 to prove that it is a primitive root modulo 11m for all positive integral m.
(c) The same approach can be applied to find a primitive root modulo 13m.
(d) Finally, for 17m, we can find a primitive root modulo 17 and use Proposition 5.17 to prove its primitiveness modulo 17m for all positive integral m.
By using Corollary 5.15 and Proposition 5.17, we can find a common primitive root for all the given integers modulo their corresponding powers.
Learn more about integral here: https://brainly.com/question/31059545
#SPJ11
Find the surface area.
24 in.
40 in.
10 in.
26 in.
Answer:
24 IN.
Sorry for all caps
Step-by-step explanation:
If the longest side of a triangle is 12 inches, what must be true about the lengths of the remaining sides?