The Ksp of CaF2 at 25 oC is 4 x 10-11. Consider a solution that is 1.0 x 10-4 M Ca(NO3)2 and 4.0 x 10-4 M NaF. 1. Q < Ksp and a precipitate will form. 2. The solution is saturated. 3. Q > Ksp and a precipitate will form. 4. Q > Ksp and a precipitate will not form. 5. Q < Ksp and a precipitate will not form.

To calculate the minimum amount of Na2CO3 needed to produce 2.00 kg of ethylene glycol, we first need to determine the balanced chemical equation for the reaction. From the given equation, we can see that 1 mole of C2H4Cl2 reacts with 1 mole of Na2CO3 to produce 1 mole of ethylene glycol (C2H6O2).

The molar mass of C2H6O2 is:

C: 12.01 x 2 = 24.02 g/mol
H: 1.01 x 6 = 6.06 g/mol
O: 16.00 x 2 = 32.00 g/mol
Total: 62.08 g/mol

Therefore, 2.00 kg of ethylene glycol is equivalent to:

2.00 kg = 2,000 g
2,000 g / 62.08 g/mol = 32.24 mol

Since the reaction requires 1 mole of Na2CO3 for every mole of C2H4Cl2, we need at least 32.24 moles of Na2CO3. The molar mass of Na2CO3 is:

Na: 22.99 x 2 = 45.98 g/mol
C: 12.01
O: 16.00 x 3 = 48.00 g/mol
Total: 105.99 g/mol

Therefore, the minimum amount of Na2CO3 needed is:

32.24 mol x 105.99 g/mol = 3,417 g or 3.42 kg

So, we need at least 3.42 kg of Na2CO3 to produce 2.00 kg of ethylene glycol.

Learn more about ethylene glycol here:

https://brainly.com/question/10405060

#SPJ11

To produce 2.00 kg of ethylene glycol from the given reaction, a minimum of 2.87 kg of  Na₂CO₃is needed.

The balanced chemical equation for the given reaction is:

C₂H4Cl₂(l) + Na₂CO₃(s) + H₂O(l) → C₂H₆O₂(l) + 2NaCl(aq) + CO₂(g)

From the equation, we can see that the mole ratio of  Na₂CO₃ to C₂H₆O₂is 1:1. Therefore, we need to calculate the amount of Na₂CO₃ required to produce 2.00 kg of C₂H₆O₂.

The molar mass of C₂H₆O₂ is:

2 x (12.01 g/mol for C) + 6 x (1.01 g/mol for H) + 2 x (16.00 g/mol for O) = 62.07 g/mol

The number of moles of C₂H₆O₂ required to produce 2.00 kg (or 2000 g) can be calculated as:

n(C₂H₆O₂) = mass/molar mass = 2000 g/62.07 g/mol = 32.22 mol

Since the mole ratio of Na₂CO₃ to C₂H₆O₂ is 1:1, we need 32.22 mol of Na₂CO₃ to produce 32.22 mol of C₂H₆O₂.

The molar mass of Na₂CO₃ is:

2 x (22.99 g/mol for Na) + 1 x (12.01 g/mol for C) + 3 x (16.00 g/mol for O) = 105.99 g/mol

The mass of Na₂CO₃ required to produce 32.22 mol can be calculated as:

mass = n x molar mass = 32.22 mol x 105.99 g/mol = 3,425.8 g = 3.43 kg

Therefore, a minimum of 3.43 kg (or 2.87 kg considering the significant figures) of Na₂CO₃ is needed to produce 2.00 kg of ethylene glycol.

Learn More about Ethylene glycol

https://brainly.com/question/24213993

#SPJ4

The formula for the lowest molecular weight chiral compound containing C, H, and possibly O, N, or S, with only one functional group as a nitrile is: C₂H₃N.

To form a chiral compound, we need at least one carbon atom with four different substituents. In this case, we have two carbon atoms: one as part of the nitrile functional group (-CN) and another as the chiral center.

The chiral carbon is bonded to the nitrile group, a hydrogen atom, and an implied third group, which in this case is another hydrogen atom.

The nitrile functional group consists of a carbon atom triple-bonded to a nitrogen atom. The chiral carbon atom is indicated with a wedged bond for the hydrogen atom to represent the stereochemistry of the molecule.

To know more about triple-bonded click on below link:

https://brainly.com/question/16888881#

#SPJ11

The correct answer is (d) 1.96.

For a 90% confidence interval, we need to find the z-score that corresponds to the middle 90% of the standard normal distribution. This can be done using a z-table or calculator.

Using a z-table, we can find the z-score that corresponds to a tail area of 0.05 (half of the 10% not in the middle). This is 1.645. To get the z-score for the middle 90%, we can double this value to get 1.645 x 2 = 3.29. However, we only need half of this value to get the z-score for the middle 90% (since the other half is in the other tail). Therefore, zα/2 = 1.645/2 = 0.825.

Alternatively, we can use a calculator to directly find the z-score that corresponds to a 90% confidence interval. This is zα/2 = 1.96.

Learn more about confidence here:
https://brainly.com/question/29048041

#SPJ11

A procedure and a flow diagram are illustrated according to the chemical reaction.

To separate the components in the mixture, the following procedure can be followed:

The flow diagram for the above procedure is as follows:

A mixture containing lead carbonate, sodium chloride, and 1,4-dichlorobenzene → Dissolve in water → Add dilute HCl → Filter → Lead carbonate solid obtained → Filtrate → Add NaOH → Filter → Sodium chloride solid obtained → Filtrate → Add ether → Extract 1,4-dichlorobenzene → Separate ether layer → Evaporate ether → Pure 1,4-dichlorobenzene obtained.

Learn More about  flow diagrams

https://brainly.com/question/30425877

#SPJ4

The density of nitrogen gas at 1.98 atm and 74.5°C is approximately 1.946 g/L.

To find the density of nitrogen gas at 1.98 atm and 74.5°C, we can use the Ideal Gas Law equation, which is PV = nRT. We will modify this equation to find the density (ρ) by using the formula: ρ = (PM)/(RT), where P is pressure, M is molar mass, R is the gas constant, and T is temperature.

1. Convert temperature to Kelvin:
T (K) = 74.5°C + 273.15 = 347.65 K

2. Use the values given in the problem and the constants:
P = 1.98 atm
M (molar mass of nitrogen, N₂) = 28.02 g/mol
R (gas constant) = 0.0821 L atm / (K mol)

3. Plug the values into the density formula:
ρ = (PM)/(RT) = (1.98 atm * 28.02 g/mol) / (0.0821 L atm / (K mol) * 347.65 K)

4. Calculate the density:
ρ = (55.476 g/mol) / (28.5093 L/mol) = 1.946 g/L

The density of nitrogen gas at 1.98 atm and 74.5°C is approximately 1.946 g/L.

Know more about Density here:

https://brainly.com/question/28929608

#SPJ11

Therefore, the pH of the resulting solution is approximately 11.32.

The pH of the resulting solution, we need to find the moles of HCl and Ca(OH)₂ in the solution.

Moles HCl = (0.250 mol/L) x (0.0560 L) = 0.0140 mol

Moles Ca(OH)₂ = (0.150 mol/L) x (0.0400 L) = 0.00600 mol

Since HCl is a strong acid and Ca(OH)₂ is a strong base, they will react completely in a 1:2 ratio to form CaCl₂ and water:

2HCl + Ca(OH)₂ → CaCl₂ + 2H₂O

So, all of the HCl will react with twice as much Ca(OH)₂ to form CaCl₂, leaving behind 0.00200 mol of Ca(OH)₂ in solution.

Next, we can find the concentration of hydroxide ions in the solution:

[OH⁻] = (0.00200 mol) / (0.0960 L) = 0.0208 M

Finally, we can use the Kw expression to find the concentration of hydrogen ions:

Kw = [H⁺][OH⁻] = 1.0 x 10⁻¹⁴

[H⁺] = Kw / [OH⁻] = (1.0 x 10⁻¹⁴) / (0.0208 M) = 4.81 x 10⁻¹²

Learn more about ph Visit: brainly.com/question/26424076

#SPJ4

Certain radioactive nuclides undergo one-step nuclear decay to become stable nuclei. For instance, 60Co, which is unstable, immediately decays to 60Ni, which would be stable.

The parent atom's mass number is decreased by 4, and its atomic number is decreased by 2. Organization considers, 22286Rn 42He+21884Po 866 222 R ng 2 4 H e + 84 218 P o is the nuclear equation explaining the alpha degradation of 22286Rn 1986 222 R n.

The nucleus loses h+ ions during alpha decay. The nucleus either acquires or loses a proton during beta decay. There is no proton change in gamma decay.

To know more about proton visit :

https://brainly.com/question/1252435

#SPJ1

The second step of the aldol reaction using ethanal and dilute aq NaOH involves the nucleophilic attack of the enolate ion on the carbonyl carbon of another ethanal molecule, forming a new C-C bond and an alkoxide ion.

In the aldol reaction, the first step is the formation of the enolate ion by the deprotonation of the alpha hydrogen of ethanal by NaOH. In the second step, the enolate ion acts as a nucleophile and attacks the electrophilic carbonyl carbon of another ethanal molecule.

The curved arrow originates from the negatively charged oxygen of the enolate ion and points towards the carbonyl carbon, indicating the movement of the electron pair.

As a result, the double bond between the carbonyl carbon and oxygen shifts to form a bond with the oxygen, creating an alkoxide ion. The new C-C bond and alkoxide ion ultimately lead to the formation of the aldol product.

To know more about nucleophilic attack click on below link:

https://brainly.com/question/31279781#

#SPJ11

The appropriate formal charges for each atom in the minimized Lewis structure of NCO⁻ are N = +3, C = +1, and O = +1.

To draw the Lewis structure of NCO⁻, we first need to determine the total number of valence electrons in the molecule. N has 5 valence electrons, C has 4, and O has 6, giving a total of 15 electrons. We then place the atoms in a linear arrangement with the N in the center and the C and O on either side. We then place the remaining electrons around each atom to satisfy the octet rule.
N: 5 valence electrons + 2 electrons from a triple bond with C + 1 lone pair = 8 electrons
C: 4 valence electrons + 2 electrons from the triple bond with N = 6 electrons
O: 6 valence electrons + 1 lone pair = 8 electrons
The Lewis structure of NCO⁻ is therefore:
:N≡C:O:
We can then calculate the formal charges of each atom by subtracting the number of lone pair electrons and half the number of bonding electrons from the number of valence electrons for each atom.
Formal charge on N = 5 - 2 - 1 = +2
Formal charge on C = 4 - 2 - 0 = +2
Formal charge on O = 6 - 4 - 1 = +1
To minimize the formal charges, we can move one of the lone pairs from the O to the C, giving:
:N≡C=O:
Formal charge on N = 5 - 2 - 0 = +3
Formal charge on C = 4 - 2 - 1 = +1
Formal charge on O = 6 - 4 - 1 = +1
Therefore, the appropriate formal charges for each atom in the minimized Lewis structure of NCO⁻ are N = +3, C = +1, and O = +1.

Learn more about Lewis structure :

https://brainly.com/question/20300458

#SPJ11

O

|

C

|

-C

|

=C

O  N  -O

|  

|    

O  N  -   O

|  |   |

-C -N-C

| |

C -C

The activity series for Copper, Lead, and Zinc in order of decreasing reactivity (most active to least active) is:

Zinc > Copper > Lead

This means that Zinc will displace Copper and Lead from their salts in solution, Copper will displace Lead but not Zinc, and Lead will not displace either Copper or Zinc.

The activity series is a list of metals and their ions in order of their relative reactivity with each other. The most reactive metal is at the top of the list and the least reactive metal is at the bottom of the list.

This series helps to predict the outcome of a chemical reaction between two metals or their ions. When a metal is placed in a solution containing ions of another metal, the metal with a higher position in the activity series will replace the metal with a lower position in the activity series.

Visit here to learn more about activity series brainly.com/question/14129976

#SPJ11

To estimate the temperature increase in a rubber band when extended to ? = 8 at 20°C, we need to use the formula Q = mC?T, where Q is the heat absorbed by the rubber band, m is the mass of the rubber band, C is the heat capacity, ?T is the change in temperature.

First, we need to calculate the mass of the rubber band. We know that the density of rubber is ? = 1 g/cm?, and the volume of the rubber band when extended to ? = 8 is:

V = ?r²h = ?(0.4 cm)²(8 cm) = 1.01 cm³

Therefore, the mass of the rubber band is:

m = ?V = 1 g

Now, we can calculate the heat absorbed by the rubber band. When a rubber band is extended, it absorbs energy in the form of work done on it. The work done is:

W = F?x = k(?)?x²/2

where F is the force applied to the rubber band, ?x is the extension, and k(?) is the spring constant of the rubber band. For simplicity, let's assume that the force required to extend the rubber band is constant and equal to 1 N. Then:

k(?) = F/?x = 1/(8/100) = 12.5 N/m

The work done on the rubber band is:

W = k(?)?x²/2 = (12.5 N/m)(0.08 m)²/2 = 0.04 J

This work is converted into heat, which is absorbed by the rubber band. Therefore, Q = W = 0.04 J.

Finally, we can calculate the change in temperature of the rubber band using the formula:

?T = Q/(mC) = 0.04 J/(1 g)(2 J/g-K) = 0.02 K

Therefore, the estimated temperature increase in the rubber band when extended to ? = 8 at 20°C is 0.02 K.
To estimate the temperature increase in a rubber band extended to a stretch ratio (?) of 8 at 20°C, you need to use the provided information: the heat capacity (C) is 2 J/g-K, and the mass per unit length (?) is 1 g/cm. However, we do not have enough information to provide an accurate estimate. We would need to know the work done on the rubber band or any other energy-related parameter to calculate the temperature increase.

Visit here to learn more about temperature brainly.com/question/15267055

#SPJ11

The halogenated acetanilide 5 must be transformed into the amine 6 before introducing iodine into the ring because of the differences in activating power between amide and amino groups, as well as the electrophilicity of the iodonium ion.

Step 1: Understand activating power.
Activating power refers to the ability of a substituent to increase the reactivity of an aromatic ring towards electrophilic aromatic substitution (EAS). Amide groups (as in acetanilide) are weakly activating, while amino groups are strongly activating.

Step 2: Consider electrophilicity.
Electrophilicity refers to the ability of a molecule or ion to accept electrons from another molecule or ion. The iodonium ion is a highly electrophilic species, which means it readily accepts electrons from nucleophiles.

Step 3: Explain the transformation.
Since the iodonium ion is highly electrophilic, it requires a strongly activating group on the aromatic ring to facilitate the reaction. The amide group in halogenated acetanilide 5 is only weakly activating, which makes it difficult for the iodonium ion to react with the aromatic ring. By transforming the halogenated acetanilide 5 into the amine 6, you introduce a strongly activating amino group, which greatly increases the reactivity of the aromatic ring towards the electrophilic iodonium ion, allowing for the successful iodination of the ring.

To learn more about electrophilicity https://brainly.com/question/31051319

#SPJ11

The type of reactive intermediate formed in the reaction of an alkene with Br2 and H2O to give a bromohydrin is a cyclic bromonium ion. This is because the Br2 adds across the double bond of the alkene to form a three-membered ring intermediate that has a positive charge on the bromine atom.

This cyclic bromonium ion then undergoes attack by water to give the final product, a bromohydrin. Neither a carbanion nor a carbocation is involved in this reaction, and a radical intermediate is also not formed.
In the reaction of an alkene with Br2 and H2O to form a bromohydrin, the reactive intermediate that is formed is a cyclic bromonium ion.

An alkene is a hydrocarbon compound that contains a carbon-carbon double bond in its molecular structure. Alkenes are unsaturated compounds, which means that they have fewer hydrogen atoms than their corresponding alkane (saturated hydrocarbon) counterparts. They have the general formula of CnH2n, where n is the number of carbon atoms in the molecule.

Alkenes are important in organic chemistry because they undergo a variety of reactions, such as addition reactions, oxidation reactions, and polymerization reactions. They are commonly used in the production of polymers, plastics, and solvents. Some examples of common alkenes include ethene (C2H4), propene (C3H6), and butene (C4H8).

Visit here to learn more about alkene brainly.com/question/31033378
#SPJ11

To calculate the number of molecules of O₂ required to make 1.44 g of KHCO₃, follow these steps:

1. Determine the molar mass of KHCO₃: K (39.10 g/mol) + H (1.01 g/mol) + C (12.01 g/mol) + 3 * O (3 * 16.00 g/mol) = 100.12 g/mol.

2. Calculate the moles of KHCO₃: (1.44 g KHCO₃) / (100.12 g/mol) = 0.0144 moles KHCO₃.

3. Write the balanced chemical equation for the reaction: 2 K + H₂O + CO₂ + 1/2 O₂ → KHCO₃ + KOH.

4. From the balanced equation, we can see that 1/2 mole of O₂ is required to produce 1 mole of KHCO₃. To find the moles of O₂ needed, multiply the moles of KHCO₃ by 1/2: (0.0144 moles KHCO₃) * (1/2) = 0.0072 moles O₂.

5. Convert the moles of O₂ to molecules using Avogadro's number (6.022 x 10²³ molecules/mol): (0.0072 moles O₂) * (6.022 x 10²³ molecules/mol) = 1.30 x 10²² molecules O₂.

So, 1.30 x 10²² molecules of O₂ are required to make 1.44 g of KHCO₃.

Learn more about Molecules at https://brainly.com/question/475709

#SPJ11

The change in pH after adding 0.15 mol of HCl to a 500 mL buffer containing 0.50 M NH₃ and 0.50 M NH₄Cl is -0.31.

To calculate the change in pH, follow these steps:

1. Calculate the initial pH using the Henderson-Hasselbalch equation: pH = pKa + log([A⁻]/[HA]). For NH₃, pKa = 14 - pKb = 9.26.

2. Find the initial moles of NH₃ and NH₄Cl: moles = Molarity × Volume. 0.50 M × 0.5 L = 0.25 mol each.

3. Determine the reaction between added HCl and NH₃: NH₃ + HCl → NH₄Cl. 0.15 mol HCl reacts with 0.15 mol NH₃, leaving 0.10 mol NH₃ and 0.40 mol NH₄Cl.

4. Recalculate the new concentrations: [NH₃] = 0.10 mol / 0.5 L = 0.20 M; [NH₄Cl] = 0.40 mol / 0.5 L = 0.80 M.

5. Calculate the new pH using the Henderson-Hasselbalch equation: pH = 9.26 + log(0.20/0.80) = 8.95.

6. Determine the change in pH: ΔpH = final pH - initial pH = 8.95 - 9.26 = -0.31.

To know more about Henderson-Hasselbalch equation click on below link:

https://brainly.com/question/13423434#

#SPJ11

The balanced equation with the smallest whole-number coefficients is Al2(SO4)3 + 3Ca(OH)2 → 2Al(OH)3 + 3CaSO4. Therefore, the coefficient in front of the CaSO4 when the equation is completely balanced with the smallest whole-number coefficients is 3 (option C).

To determine the coefficient in front of the CaSO4 when the given unbalanced equation Al2(SO4)3 + Ca(OH)2 → Al(OH)3 + CaSO4 is completely balanced with the smallest whole-number coefficients, follow these steps:

See more about equation in:

https://brainly.com/question/2972832

#SPJ11

The pH of the solution containing 200 mL of 0.1 M NaOH and 80 mL of 2.5 M Acetic Acid is 2.47.

When we discuss a solution's pH, also known as its "potential of hydrogen" or "power of hydrogen," we are really talking about its hydrogen ion concentration. In other words, the pH scale is used to define whether an aqueous solution is basic or acidic. Acidic solutions with greater H+ ion concentrations often have pH values that are lower than basic or alkaline solutions.

When the solution's pH is less than 7 and the temperature is 25 °C, the solution is acidic. The same holds true for solutions that have a pH higher than 7. They are neutral ions if a solution has a pH of 7 at this temperature.

In pure water, there are 10-7 moles of dissociated hydrogen ions per litre. Based on the proportion of hydrogen ions (H+) relative to pure water, solutions are classified as acidic or basic.

We have acid base solution so net pH will be the amount of H+ left after neutralizing the acid acetic acid  with base NaOH

so mole of H⁺ =   volume x molarity

= 80mL x 2.5 M  = 200 milli moles

similarly mole of base

= 200 mL x 0.1M

= 20 milli moles

so amount of H+ left = moles of acetic acid - moles of NaOH

= 200 millimoles - 20 millimoles

=  180 millimoles

The concentration of H⁺  = moles / volume of water

=  180 millimoles / 280 milliliter

= 0.64 M

pH = -log (H⁺) = -log(0.64 ) = 2.47

Learn more about pH of solution:

https://brainly.com/question/29323762

#SPJ4

The pH of the solution containing 200 mL of 0.1 M NaOH and 80 mL of 2.5 M Acetic Acid is 2.47.

When we discuss a solution's pH, also known as its "potential of hydrogen" or "power of hydrogen," we are really talking about its hydrogen ion concentration. In other words, the pH scale is used to define whether an aqueous solution is basic or acidic. Acidic solutions with greater H+ ion concentrations often have pH values that are lower than basic or alkaline solutions.

When the solution's pH is less than 7 and the temperature is 25 °C, the solution is acidic. The same holds true for solutions that have a pH higher than 7. They are neutral ions if a solution has a pH of 7 at this temperature.

In pure water, there are 10-7 moles of dissociated hydrogen ions per litre. Based on the proportion of hydrogen ions (H+) relative to pure water, solutions are classified as acidic or basic.

We have acid base solution so net pH will be the amount of H+ left after neutralizing the acid acetic acid  with base NaOH

so mole of H⁺ =   volume x molarity

= 80mL x 2.5 M  = 200 milli moles

similarly mole of base

= 200 mL x 0.1M

= 20 milli moles

so amount of H+ left = moles of acetic acid - moles of NaOH

= 200 millimoles - 20 millimoles

=  180 millimoles

The concentration of H⁺  = moles / volume of water

=  180 millimoles / 280 milliliter

= 0.64 M

pH = -log (H⁺) = -log(0.64 ) = 2.47

Learn more about pH of solution:

https://brainly.com/question/29323762

#SPJ4

The most stable compound is the second one (tropone). Aldehydes and ketones are organic compounds that contain a carbonyl functional group; a keton is any member of this family of organic compounds in which the carbon atom is covalently bound to an oxygen atom.

However, because the carbonyl pi link is thermodynamically considerably more stable than the alkene pi bond, the circumstances needed are quite different. Conditions must be forced for a carbonyl group to hydrogenate. Electronic causes ketones are less reactive than aldehydes because the two alkyl groups in ketones more effectively diminish the electrophilicity of the carbonyl carbon than they do in aldehydes.

To know more about ketones, click here:

https://brainly.com/question/4439718

#SPJ4

The ΔSsurr is: -147.46 J/K*mol.

The given problem requires the determination of the change in entropy of the surroundings (ΔSsurr) when one mole of the substance is vaporized at a pressure of 1.00 atm. The given information is ΔHvap (enthalpy of vaporization) = 52.6 kJ/mol and the boiling point is 83.4°C. To solve the problem, we need to use the formula:

ΔSsurr = -ΔHvap / T
where T is the temperature in Kelvin.

So, we need to convert the boiling point from Celsius to Kelvin by adding 273.15 to the value:

T = 83.4°C + 273.15 = 356.55 K

Next, we convert ΔHvap from kJ/mol to J/mol by multiplying it with 1000:

ΔHvap = 52.6 kJ/mol × 1000 J/kJ = 52600 J/mol

Now, we can substitute these values into the formula to find ΔSsurr:

ΔSsurr = -52600 J/mol / 356.55 K = -147.46 J/K*mol

Therefore, the change in entropy of the surroundings when one mole of the substance is vaporized at 1.00 atm is -147.46 J/K*mol.

To know more about "Entropy" refer here:

https://brainly.com/question/1859555#

#SPJ11

The resulting saturated solution has ph = 9.00. Then the Ksp of Mg(OH)2 is 1.0 * 10^{-20}.

To solve this problem, we need to use the equilibrium expression for the dissolution of Mg(OH)2 in water:
Mg(OH)2(s) ⇌ Mg2+(aq) + 2OH-(aq)
The Ksp expression for this reaction is:
Ksp = [Mg2+][OH-]^{2}
We are given that excess solid Mg(OH)2 is shaken with 1.00 L of 1.0 M NH4Cl solution. This means that NH4Cl is a spectator ion and does not affect the equilibrium. Therefore, we can assume that the concentration of Mg2+ and OH- ions in the saturated solution is equal to the solubility of Mg(OH)2.
To calculate the solubility, we need to use the pH of the solution. We know that pH = 9.00, which means [H+] = 1.0 x 10^-9 M. Since Mg(OH)2 is a strong base, it will react with water to produce OH- ions:
Mg(OH)2(s) + 2H2O(l) ⇌ Mg2+(aq) + 2OH-(aq) + 2H2O(l)
The concentration of OH- ions can be calculated using the pH:
pH = -log[H+]
9.00 = -log[H+]
[H+] = 1.0 * 10^{-9} M
[OH-] = \frac{Kw}{[H+]} =\frac{ 1.0 * 10^{-14} M}{ 1.0 * 10^{-9} M} = 1.0 * 10^{-5} M
Since Mg(OH)2 dissociates to produce two OH- ions, the concentration of Mg(OH)2 in the saturated solution is:
[Mg(OH)2] = [OH-]^{2 }= (1.0 * 10^{-5} M)^{2} = 1.0 * 10^{-10} M
Finally, we can calculate the Ksp of Mg(OH)2 using the solubility:
Ksp = [Mg2+][OH-]^2
Ksp = (1.0 * 10^{-10} M)(1.0 *10^{-5} M)^{2}
Ksp = 1.0 * 10^{-20}
Therefore, the Ksp of Mg(OH)2 is 1.0 * 10^{-20}.

learn more about equilibrium Refer: https://brainly.com/question/30694482

#SPJ11

90% of 100.2 g, or 90.18 g, of calcium nitride was produced.

A chemical reaction is a process that changes one group of chemical constituents into another. As reactants are transformed into products, chemical bonds between atoms are formed and broken. Typically, this is an exothermic process that releases energy as heat or light.

Calcium nitride, also known as [tex]Ca_3N_2[/tex], is created by the interaction of calcium and nitrogen gas. The mass of calcium nitride that is produced when 56.6 g of calcium and 30.5 g of nitrogen gas are combined can be calculated using stoichiometry.

The reaction's balanced equation is as follows: [tex]3C_a+N_2- > Ca_3N_2[/tex]

Therefore, 3 moles of nitrogen are needed for every 1 mole of calcium. The following equation can be used to determine the moles of calcium

and nitrogen:

Moles of [tex]C_a[/tex] = 56.6 g / 40 g/mol = 1.415 mol

Moles of [tex]N_2[/tex] = 30.5 g / 28 g/mol = 1.089 mol

Since nitrogen is the limiting reagent and calcium and nitrogen have a mole ratio of 1.089:1.415, the following formula can be used to get the potential calcium nitride yield:

Theoretical yield = 1.089 mol × 92 g/mol = 100.2 g

The actual yield of calcium nitride is 90% of the theoretical yield because the reaction has a 90% yield. Therefore, 90% of 100.2 g, or 90.18 g, of calcium nitride was produced.

To know more about chemical reaction, click-

brainly.com/question/25769000

#SPJ1

Part A: Glucose (polar) Appropriate solvent: Water (H2O),Part B: Salt (ionic) Appropriate solvent: Water (H2O),Part C: Vegetable oil (nonpolar) Appropriate solvent: Hexane (C6H12),Part D: Sodium nitrate (ionic) Appropriate solvent: Water (H2O)

Hi! I'd be happy to help you choose appropriate solvents for each substance.

Part A: Glucose (polar)
Appropriate solvent: Water (H2O)
Explanation: Polar solvents dissolve polar substances. Water is a polar solvent and can dissolve glucose, which is also polar.

Part B: Salt (ionic)
Appropriate solvent: Water (H2O)
Explanation: Polar solvents are also effective at dissolving ionic substances. Water, being a polar solvent, can dissolve salt.

Part C: Vegetable oil (nonpolar)
Appropriate solvent: Hexane (C6H12)
Explanation: Nonpolar solvents dissolve nonpolar substances. Hexane is a nonpolar solvent and can dissolve vegetable oil, which is nonpolar.

Part D: Sodium nitrate (ionic)
Appropriate solvent: Water (H2O)
Explanation: Polar solvents can dissolve ionic substances. Water, as a polar solvent, can dissolve sodium nitrate.

learn more about ionic here

https://brainly.com/question/14614762

SPJ11

The equilibrium concentrations of all species are; [Ag⁺] = 0.191 M, [NH₃] = 1.34 × 10⁻³ M, and [Ag(NH₃)₂]+ = 0.0800 M.

Write the balanced equation for the reaction between AgNO₃ and NH₃;

Ag⁺ + 2NH₃ ⇌ [Ag(NH₃)₂]⁺

Calculate the initial moles of Ag⁺ and NH₃;

moles of Ag⁺ = 0.100 M × 0.0150 L = 1.50 × 10⁻³ moles

moles of NH₃ = 0.200 M × 0.00500 L = 1.00 × 10⁻³ moles

Determine which reactant is limiting;

Ag⁺ is in excess because there are more moles of Ag⁺ (1.50 × 10⁻³ moles) than NH₃ (1.00 × 10⁻³ moles).

Calculate the moles of Ag⁺ that react with NH₃;

moles of Ag⁺ that react = 2 × 1.00 × 10⁻³ moles = 2.00 × 10⁻³ moles

Calculate the moles of Ag⁺ and [Ag(NH₃)₂]⁺ at equilibrium;

moles of Ag⁺ = 1.50 × 10⁻³ - 2.00 × 10⁻³ = -0.50 × 10⁻³ moles (excess)

moles of [Ag(NH₃)₂]⁺ = 2.00 × 10⁻³ moles

Calculate the concentration of [Ag(NH₃)₂]⁺ at equilibrium;

[Ag(NH₃)₂]⁺ = moles of [Ag(NH₃)₂]⁺ / total volume of solution

= 2.00 × 10⁻³ moles / (15.0 mL + 5.00 mL) = 0.0800 M

Calculate the concentration of NH₃ at equilibrium using the Kb expression for NH₃;

Kb = Kw / Ka(NH₄⁺) = 1.0 × 10⁻¹⁴ / 5.6 × 10⁻¹⁰ = 1.8 × 10⁻⁵

[NH₃] × [H⁺] / [NH₄⁺] = Kb

[0.2 - x] × x / [x] = 1.8 × 10⁻⁵

x² = 1.8 × 10⁻⁵ × 0.2

x = 1.34 × 10⁻³ M

Calculate the concentration of Ag⁺ at equilibrium;

Kf = [Ag(NH₃)₂]+ / [Ag⁺] × [NH₃]²

1.7 × 10⁷ = 0.0800 / [Ag⁺] × (0.00134 M)²

[Ag⁺] = 0.191 M

Check the assumptions; We assumed that Ag⁺ was in excess initially, and this was confirmed by our calculations. We also assumed that the reaction went to completion, and this is reasonable given the very large value of Kf.

Therefore, the equilibrium concentrations of all species are;

[Ag⁺] = 0.191 M

[NH₃] = 1.34 × 10⁻³ M

[Ag(NH₃)₂]+ = 0.0800 M

To know more about equilibrium concentrations here

https://brainly.com/question/16645766

#SPJ4

The equilibrium concentrations of all species are; [Ag⁺] = 0.191 M, [NH₃] = 1.34 × 10⁻³ M, and [Ag(NH₃)₂]+ = 0.0800 M.

Write the balanced equation for the reaction between AgNO₃ and NH₃;

Ag⁺ + 2NH₃ ⇌ [Ag(NH₃)₂]⁺

Calculate the initial moles of Ag⁺ and NH₃;

moles of Ag⁺ = 0.100 M × 0.0150 L = 1.50 × 10⁻³ moles

moles of NH₃ = 0.200 M × 0.00500 L = 1.00 × 10⁻³ moles

Determine which reactant is limiting;

Ag⁺ is in excess because there are more moles of Ag⁺ (1.50 × 10⁻³ moles) than NH₃ (1.00 × 10⁻³ moles).

Calculate the moles of Ag⁺ that react with NH₃;

moles of Ag⁺ that react = 2 × 1.00 × 10⁻³ moles = 2.00 × 10⁻³ moles

Calculate the moles of Ag⁺ and [Ag(NH₃)₂]⁺ at equilibrium;

moles of Ag⁺ = 1.50 × 10⁻³ - 2.00 × 10⁻³ = -0.50 × 10⁻³ moles (excess)

moles of [Ag(NH₃)₂]⁺ = 2.00 × 10⁻³ moles

Calculate the concentration of [Ag(NH₃)₂]⁺ at equilibrium;

[Ag(NH₃)₂]⁺ = moles of [Ag(NH₃)₂]⁺ / total volume of solution

= 2.00 × 10⁻³ moles / (15.0 mL + 5.00 mL) = 0.0800 M

Calculate the concentration of NH₃ at equilibrium using the Kb expression for NH₃;

Kb = Kw / Ka(NH₄⁺) = 1.0 × 10⁻¹⁴ / 5.6 × 10⁻¹⁰ = 1.8 × 10⁻⁵

[NH₃] × [H⁺] / [NH₄⁺] = Kb

[0.2 - x] × x / [x] = 1.8 × 10⁻⁵

x² = 1.8 × 10⁻⁵ × 0.2

x = 1.34 × 10⁻³ M

Calculate the concentration of Ag⁺ at equilibrium;

Kf = [Ag(NH₃)₂]+ / [Ag⁺] × [NH₃]²

1.7 × 10⁷ = 0.0800 / [Ag⁺] × (0.00134 M)²

[Ag⁺] = 0.191 M

Check the assumptions; We assumed that Ag⁺ was in excess initially, and this was confirmed by our calculations. We also assumed that the reaction went to completion, and this is reasonable given the very large value of Kf.

Therefore, the equilibrium concentrations of all species are;

[Ag⁺] = 0.191 M

[NH₃] = 1.34 × 10⁻³ M

[Ag(NH₃)₂]+ = 0.0800 M

To know more about equilibrium concentrations here

https://brainly.com/question/16645766

#SPJ4

Enzyme concentration, pH, Temperature would change the value of Vmax. Correct alternatives are b,c,d.

The maximum velocity (Vmax) of an enzyme-catalyzed reaction is the theoretical maximum rate at which the reaction can proceed, under conditions of saturating substrate concentration. Several factors can affect Vmax:

b. Enzyme concentration: Increasing the amount of enzyme will increase the Vmax of the reaction, as there will be more enzyme molecules available to catalyze the reaction.

c. pH: Changes in pH can affect the Vmax of enzymes by altering the ionization state of amino acid residues that participate in the catalytic reaction, and by changing the shape of the enzyme's active site.

d. Temperature: Changes in temperature can affect the Vmax of enzymes by altering the rate of the catalytic reaction, as well as by changing the shape and stability of the enzyme's active site.

a. Substrate concentration: Changes in substrate concentration affect the rate of the reaction, but they do not directly affect Vmax.

To know more about maximum velocity (Vmax) here:

https://brainly.com/question/30874421#

#SPJ11

After calculating  and investigating the evaluated specific heat capacity of the given metal for the required question is 0.385 J/g°C

The specific heat capacity of a metal could be evaluated using the formula

Q = m x c x ΔT

here

Q = heat lost by,

m = mass of the sample,

c = specific heat capacity of the given metal,

ΔT = change in temperature.

given,

mass of the metal object  21.2g which was  heated to 97°C then send to an insulated vessel having 86.0g of water at 20.5°C.

The  given water temperature rises reach the same final temperature of 23.5°C.

We have to calculate Q

Q metal = -Q water

m metal x c metal x ΔTmetal = -m water x c water x ΔTwater

here

ΔTmetal = 23.5 – 97

= -73.5°C

ΔTwater = 23.5 - 20.5

= 3°C.

Staging the values in the given formula

(21.2g) x c metal x (-73.5°C)

= -(86.0g) x (4.184) x (3°C)

Calculating concerning c metal

c metal = 0.385 J/g°C

After calculating  and investigating the evaluated specific heat capacity of the given metal for the required question is 0.385 J/g°C

To learn more about specific heat capacity,

https://brainly.com/question/27991746

#SPJ4

The concentration of KMnO₄ required to establish a concentration of 2.0 × 10⁻⁸ M for Ba²⁺ ion in solution is 4.0 × 10⁻⁸ M.

To determine the concentration of KMnO₄ required to establish a concentration of Ba²⁺ ion in solution, we need to use the balanced chemical equation between KMnO₄ and Ba²⁺.

2 KMnO₄ + BaCl₂ → 2 KCl + 2 MnO₂ + Ba(OH)₂

From this equation, we can see that 2 moles of KMnO₄ reacts with 1 mole of Ba²⁺. Therefore, we can set up the following equation to find the concentration of KMnO₄ required;

2 moles of KMnO₄ / 1 mole of Ba²⁺ = concentration of KMnO₄ / 2.0 × 10⁻⁸ M

Simplifying this equation, we get;

concentration of KMnO₄ = 2 × 2.0 × 10⁻⁸ M

= 4.0 × 10⁻⁸ M

Therefore, the concentration of kmno4 is 4.0 × 10⁻⁸ M

To know more about concentration here

https://brainly.com/question/10725862

#SPJ4

the limiting reactant is the octane, and the oxygen is in excess.

To determine the limiting reactant, we need to compare the amount of product that can be formed from each reactant. The balanced chemical equation for the combustion of octane with oxygen is:

2 C8H18 + 25 O2 → 16 CO2 + 18 H2O

According to the balanced equation, 2 moles of C8H18 react with 25 moles of O2 to produce 16 moles of CO2 and 18 moles of H2O. Therefore, the stoichiometric ratio of C8H18 to O2 is 2:25.

Using the given amounts of octane and oxygen, we can calculate how many moles of each reactant are available:

- Moles of octane = 0.110 mol
- Moles of oxygen = 0.750 mol

To determine the limiting reactant, we need to calculate how many moles of each reactant would be required to fully react with the other reactant. Based on the stoichiometric ratio, 2 moles of C8H18 react with 25 moles of O2. Therefore, to fully react with 0.750 mol of O2, we would need:

(2/25) x 0.750 mol = 0.060 mol of C8H18

Similarly, to fully react with 0.110 mol of C8H18, we would need:

(25/2) x 0.110 mol = 1.375 mol of O2

Comparing the moles of each reactant available to the moles required to fully react with the other reactant, we can see that:

- The amount of oxygen (0.750 mol) is greater than the amount required to fully react with the available octane (0.060 mol).
- The amount of octane (0.110 mol) is less than the amount required to fully react with the available oxygen (1.375 mol).

Therefore, the limiting reactant is the octane, and the oxygen is in excess.

Visit to know more about Limiting reactant:-

brainly.com/question/14222359

#SPJ11

The solubility of [tex]CuC_2O_4[/tex](s) in pure water is 0.0083 g [tex]L^{-1}[/tex]. The correct option is A.

To determine the solubility of [tex]CuC_2O_4[/tex](s) in pure water, we need to use the Ksp value provided. The balanced dissociation equation for [tex]CuC_2O_4[/tex](s) is:

[tex]CuC_2O_4[/tex](s) ⇌ [tex]Cu^{2}[/tex]+ (aq) + [tex]C_2O_4^{2-}[/tex] (aq)

Since there is a 1:1 ratio between the ions, we can represent the solubility of [tex]CuC_2O_4[/tex](s) as 's'. Therefore:

Ksp = [[tex]Cu^{2+}[/tex]][[tex]C_2O_4^{2-}[/tex]] = s * s = [tex]s^2[/tex]

Given that Ksp = 2.9 × [tex]10^{-8}[/tex], we can find the solubility 's':

[tex]s^2[/tex] = 2.9 × [tex]10^{-8}[/tex]
s = √(2.9 × [tex]10^{-8}[/tex]) = 5.39 × [tex]10^{-5}[/tex] mol [tex]L^{-1}[/tex]

To convert this into grams per liter (g [tex]L^{-1}[/tex]), we need to multiply the molar solubility by the molar mass of [tex]CuC_2O_4[/tex]:

Molar mass of [tex]CuC_2O_4[/tex] = 63.5 (Cu) + 24.01 x 2 (C) + 16 x 4 (O) = 159.62 g [tex]mol^{-1}[/tex]

Solubility (g [tex]L^{-1}[/tex]) = (5.39 × [tex]10^{-5}[/tex] [tex]mol L^{-1}[/tex]) × (159.62 g [tex]mol^{-1}[/tex]) = 0.0086 g [tex]L^{-1}[/tex]

The solubility of [tex]CuC_2O_4[/tex](s) in pure water is closest to option A (0.0083 g [tex]L^{-1}[/tex]).

For more such questions on Solubility.

https://brainly.com/question/23898752#

#SPJ11

The balanced equation for the Fischer esterification of methyl 3-nitrobenzoate is:

3-nitrobenzoic acid + methanol + sulfuric acid --> methyl 3-nitrobenzoate + water

The balanced chemical equation is as follows:

[tex]C7H5NO4 + CH3OH + H2SO4 --> C8H7NO4CH3 + H2O[/tex]

In this reaction, 3-nitrobenzoic acid reacts with methanol in the presence of sulfuric acid as a catalyst to form methyl 3-nitrobenzoate and water. It is a classic example of an esterification reaction, where an alcohol and carboxylic acid react to form an ester and water.

Learn more about nitrobenzoate here:

https://brainly.com/question/30889218

#SPJ11