Answer: The average kinetic energy of the gas particles is greater in container B because it has a higher temperature.
2) A solution of copper(II) chloride is added to a solution of sodium sulfide
A. Balanced equation:
B. Explanation using activity series and solubility rules as necessary:
The equation is CuCl2 + Na2S ------> 2NaCl + CuS because Na is ahead of Cu in the electrochemical series.
What is a balanced reaction equation?A balanced reaction equation is one in which the number of atoms of each element on the reactant side is equal to the number of atoms of the same element on the product side.
In this case, the balanced reaction equation is;
CuCl2 + Na2S ------> 2NaCl + CuS. The reaction occur thus because Na is ahead of Cu in the electrochemical series and must always displace it from its aqueous solution.
Learn more about reaction equation:https://brainly.com/question/3588292
#SPJ1
100.0 degrees C a sample of 750mL gas is found. If the temperature of the gas is increased by 300 degrees, what will be the new volume gas
100.0 degrees Celsius = 100.0 + 273 = 373.0 K
[tex]\frac{750}{373.0}=\frac{V_{2}}{673.0} \\ \\ V_{2}=\frac{(673.0)(750)}{373.0} \approx \boxed{1350 \text{ mL}}[/tex]
A neutral atom of Sodium (Na) has an atomic number of 11 and an atomic mass of 23. Therefore, Na has _________________________ protons.
Answer:
11
Explanation:
Atomic number is the number of PROTONS an element has .
1. Write an unbalanced equation to represent each of the following equations. (Make sure to
show diatomic elements.)
(a) iron and sulfur react to form iron(II) sulfide
(b) hydrogen gas and oxygen gas react to form water
(c) aluminum oxide reacts to form aluminum and oxygen gas
(d) zinc and copper(II) sulfate react to form zinc(II) sulfate and copper
(e) potassium hydroxide and hydrogen bromide react to form potassium bromide and
water
The equation for each reaction is written according to the relevant as below.
Equations of chemical reactionsThe reaction between iron and sulfur to form iron (II) sulfide is written as:
[tex]Fe + S --- > FeS[/tex]
The reaction between hydrogen gas and oxygen gas to form water is written as:
[tex]H_2 (g) + O_2 (g) --- > H_2O (l)[/tex]
The reaction of aluminum oxide to form aluminum and oxygen gas is written as:
[tex]Al_2O_3 --- > Al + O_2[/tex]
Zinc and copper(II) sulfate react to form zinc(II) sulfate and copper as follows:
[tex]Zn+CuSO_4--- > ZnSO_4+Cu[/tex]
Potassium hydroxide and hydrogen bromide react to form potassium bromide and water as follows:
[tex]KOH + HBr --- > H_2O + KBr[/tex]
More on equations of chemical reactions can be found here: https://brainly.com/question/6976143
#SPJ1
In an experiment, the molar mass of the compound was determined to be 118.084 g/mol. What is the molecular formula of the compound?
Answer:
Succinic acid
Explanation:
The most common possibility is succinic acid
As it has decimals after whole no till hundredth it contains OH and C in most of the cases .
Let's check for succinic acid
C4H_6O_64(12)+4(16)+664+48+6118uYes approximately equal
Molecular formula is.
(CH_2)_2(CO_2H)_2
The kind of
reproduction that requires two
parents is called
What’s the answer for 3 and 8 please answer as soon as Possible due tomorrow morning.
Answer:
fgrthrdfghgfgfhfdhfdh
Explanation:
fdhhfgdghhdfghdfhgfhgfgh
All light rays parallel to the optical axis of a concave mirror are:
refracted.
reflected through the focal point.
diffused.
incandescent.
Answer:
A. Refracted
Explanation:
Incident rays parallel to the optical axis are reflected from the mirror.
Which of the following shows the wavelengths of light that an atom gives off when an electron falls to a lower energy level?
O A. Absorption spectrum
O B. Quantum spectrum
O C. Electromagnetic spectrum
O D. Emission spectrum
The wavelengths of light that an atom gives off when an electron falls to a lower energy level corresponds to Emission spectrum , Option D is the correct answer.
What is Emission Spectrum ?
Light is absorbed or emitted when an electron jumps or falls into an energy level.
The energy of light absorbed or emitted is equal to the difference between the energy of the orbits.
Therefore , the wavelengths of light that an atom gives off when an electron falls to a lower energy level corresponds to Emission spectrum.
To know more about Emission Spectrum
https://brainly.com/question/13537021
#SPJ1
chemistry can someone solve this?
eimetchuinsumuleavtubronAnswer:
Explanation:
PLEASE HELP!!!
Choose from the given list of aqueous solutions (A-D).
Solution A has [H3O+] = 3.5×10-5 M.
Solution B has [H3O+] = 3.5×10-4 M
Solution C has [OH-] = 1.3×10-10 M
Solution D has [OH-] = 6.2×10-11 M
Which solution is the least acidic?
Which solution has the highest pH?
Which solution is the most basic?
Which solution is the least basic?
Find pH of all
#A
pH=-log[H+]
pH=-log[3.5×10^{-5}]pH=-log3.5+5pH=4.4#B
pH=-log3.5+4pH=3.4#C
pOH=-log[OH]
pOH=-log[1.3×10^{-10}]pOH=-log1.3+109.8pH=
14-9.84.2#4
pOH=-log6.2+11pOH=10.2pH
14-10.23.8So our answers
solution A is least acidicsolution A has the highest pHsolution A is most basicsolution B is least basicBalance this reaction.
CO +
H2 →
CH3OH
Why do you think there are many wind systems between a pole and the equator instead of just one large single wind system
As a result, the Poles have high pressure (cold air) while the Equator has low pressure (warm air). Hot air from the Equator rises and goes toward the Poles, while colder air from the Poles lowers and moves toward the Equator, resulting in a continuous wind pattern.
Two contribution of chemistry in clothing
Textiles for clothes are also sometimes finished with chemicals, for example, to stiffen them and make them wrinkle-free. Chemicals in their nanoforms are helping make textiles more resistant to water, stains, wrinkles, bacteria and mould. Some of the chemicals can be harmful.
☆...hope this helps...☆
_♡_mashi_♡_
A crate holds 20 boxes of sewing supplies. Each box contains 8 spools of thread. Each spool has 250 meters of thread wrapped around it. What length of thread is contained in a crate?
Answer: 40000
Explanation:
250*8=2,000
2000*20=40000
Pulses A, B, C, and D all travel at 10 m/s on the same string but in opposite directions. The string is depicted at time t=0 in (Figure 1). The small pulses have an amplitude of 2.0 cm, and the large pulse has an amplitude of 4.0 cm.
A) Find the displacement of point P at time t=0.10s .
B) Find the displacement of point P at time t=0.20s .
(a) The displacement of point P at time t=0.10s is determined as +2cm.
(b) The displacement of point P at time t=0.20s is determined as -2cm.
What is displacement?Displacement is the change in position of an object. It is obtained from the product of velocity and time of motion.
x = vt
Displacement of the waves after 0.1 sx = 10 m/s x 0.1 s = 1 m
Each wave will travel 1 m to the right or to the left, depending on the initial direction.
wave B from left will stop at point 0 mwave A from left will stop at point -1 mwave C from right will stop at point 0 mwave D from right will stop at point + 1 mwave B and C superimposed and the displacement will be between A and D.
Amplitude of A = - 2cm
Amplitude of D = + 4cm
Displacement of point P = 4 cm - 2 cm = 2cm
Displacement of the waves after 0.2 sx = 10 m/s x 0.1 s = 2 m
Each wave will travel 2 m to the right or to the left, depending on the initial direction.
wave B from left will stop at point 1 mwave A from left will stop at point 0 mwave C from right will stop at point -1 mwave D from right will stop at point 0 mDisplacement of point P = (amplitude B + amplitude C) + (amplitude A + amplitude D)
Displacement of point P= (2cm - 2cm) + (2 cm - 4cm)= -2cm
Learn more about displacement here: https://brainly.com/question/2109763
#SPJ1
An acid is used to bring the pH of a solution from pH 9 to pH 6. How many times more acidic is the final solution than the initial solution?
Select one:
a.
3
b.
10
c.
100
d.
1000
answer number ! and fill in the unkown
The identity of the unknown compound is Urea from the Table# given. The reason for this identification will further be discussed below.
What is melting point?Melting point can be defined as the point at which a substance changes from a solid phase or state to a liquid state
When two substances of different melting points are added together, the total melting point obtained is usually depressed.
From the table,
When urea and benzoic acid is added the melting point range becomes = 117-120When urea and Cinnamic acid is added the melting point range becomes= 100-125, and both of which is lower than the individual melting points.Therefore, the identity of the unknown compound is Urea from the Table# given.
Learn more about melting point here:
https://brainly.com/question/15192741
#SPJ1
Which of the following is true about homogeneous mixtures?
a) They consist of two or more phases.
b) They are always liquids.
c) They have compositions that never vary.
d) They are known as solutions.
20.0 g of bromic acid, HBrO3, is reacted with excess HBr.
HBrO3 (aq) + 5 HBr (aq) → 3 H2O (l) + 3 Br2 (aq)
What is the theoretical yield of Br2 for this reaction? Round your answer to the nearest gram.
After Rounding off The percentage yield is 64%
What is Percentage Yield ?It is the ratio of actual yield to theoretical yield multiplied by 100% .
It is given in the question
20.0 g of bromic acid, HBrO3, is reacted with excess HBr.
The reaction is
HBrO₃ (aq) + 5 HBr (aq) → 3 H₂O (l) + 3 Br₂ (aq)
Actual yield = 47.3 grams
Molecular weight of Bromic Acid is 128.91 gram
Moles of Bromic Acid = 20/128.91 = 0.155 mole
Mole fraction ratio of Bromic Acid to Bromine is 1 :3
Therefore for 0.155 mole of Bromic Acid 3 * 0.155 = 0.465 mole of Bromine is produced.
1 mole of Bromine = 159.8 grams of Bromine
0.465 of Bromine = 74.31 grams of Bromine
Percentage Yield = (47.3/74.31)*100 = 63.65 %
After Rounding off The percentage yield is 64% .
To know more about Percentage Yield
brainly.com/question/22257659
#SPJ1
Answer:
74g
Explanation:
The other person had said that the Percentage Yield = (47.3/74.31)*100 = 63.65 %
So, since to find the percent yield you have to divide the actual yield by the theoretical yield, I would assume the theoretical yield is 74.31g (74g if you round to the nearest gram)
Calculate the mass of 162 L of chlorine gas, measured at STP.
Answer:
V=162 l
Vm=22.4 mol/l
n=V/Vm=7.23 moles
n=m/M M Cl=35.4
m=n×M
m=256.01 grams
Select the correct answer.
Which of the following is a physical model of the Sun?
O A.
an equation that describes the Sun's motion
OB.
a chart that lists the temperatures of different parts of the Sun
O C.
a computer program that shows how the Sun changes over time
O D. a paragraph that describes the Sun's structure
OE.
a small yellow ball that represents the Sun
What is the volume of a 12.96 g sample of pure hydrogen gas?
The volume of the 12.96 g sample of pure hydrogen gas is 145.24 L
How to determine the mole of hydrogen gas
We'll begin by calculating the number of mole in 12.96 g hydrogen gas. This can be obtained as follow:
Mass of Hydrogen gas = 12.96 gMolar mass of hydrogen gas = 2 g/mol Mole of Hydrogen gas =?Mole = mass / molar mass
Mole of Hydrogen gas = 12.96 / 2
Mole of Hydrogen gas = 6.48 mole
How to determine volume of hydrogen gasTo determine the volume of the pure hydrogen gas, we shall assume that the gas is at standard temperature and pressure (STP). Thus, we shall apply the ideal gas equation as illustrated below:
Temperature (T) = STP = 273 KPressure (P) = STP = 1 atm Gas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) = 6.48 moleVolume (V) =?V = nRT / P
V = (6.48 × 0.0821 × 273) / 1
V = 145.24 L
Learn more about ideal gas equation:
https://brainly.com/question/4147359
#SPJ1
how many moles are in 150 grams lf NaOH
Answer:
3.75 mole
Explanation:
molecular mass of NaOH = 39.97 gm
i.e,
==>39.97 gm NaOH contains 1 mole of NaOH
==>1 gm of NaOH contains 1/39.97 mole of NaOH
==>150 gm of NaOH contains (1/39.97) *150 mole of NaOH
==>150 gm of NaOH contains 3.75 mole of NaOH.
A helium balloon possesses a volume of 2500 L at a temperature of 114 °C. What volume will the balloon have if the temperature changes to 56 °C? The pressure remains constant
Given that the pressure remains constant, if the temperature of the helium balloon decreases to the given value, the volume increases to 2125.5L.
What is Charles's law?Charles's law states that "the volume occupied by a definite quantity of gas is directly proportional to its absolute temperature.
It is expressed as;
V₁/T₁ = V₂/T₂
Given the data in the question;
Initial temperature of gas T₁ = 114°C = (114+273.15)K = 387.15KInitial volume of gas V₁ = 2500LFinal temperature T₂ = 56°C = (56+273.15)K = 329.15KFinal volume V₂ = ?V₁/T₁ = V₂/T₂
V₂ = V₁T₂ / T₁
V₂ = ( 2500L × 329.15K ) / 387.15K
V₂ = 882875LK / 387.15K
V₂ = 2125.5L
Given that the pressure remains constant, if the temperature of the helium balloon decreases to the given value, the volume increases to 2125.5L.
Learn more about Charles's law here: brainly.com/question/12835309
#SPJ1
What is the molality of 35 g acetone dissolved in 0.95 kg water? The molar mass of acetone is 58.1 g/mol.
The molality of 35 g acetone dissolved in 0.95 kg water is 0. 63 mol/kg
How to determine the molalityUsing the formula:
Molality = number of moles of solute÷ mass of solvent
Note that number of moles = mass divided by the molar mass
mass of acetone = 35g
Molar mass of acetone = 58. 1g/mol
Number of moles of acetone = 35÷ 58.1 = 0.602 mole
Molality of acetone = 0. 602÷ 0. 95 = 0. 63 mol/kg
Hence, the molality of acetone is 0. 63 mol/kg
Learn more about molality here:
https://brainly.com/question/14485544
#SPJ1
What most likely happens when water vapor cools?
It changes into gas.
It changes into liquid.
Its temperature increases.
Its temperature remains constant.
Answer:
hello :)
Explanation:
Water vapor in the air reaches its dew point as it cools in the air around the can, forming liquid drops of water. Condensation is the process where water vapor becomes liquid.
Part E
Tsunami evacuation plans often consider the elevation of the community and its distance from the shoreline when
deciding which towns to evacuate. How could this data help in building new homes and communities along coastal areas
that are prone to tsunamis?
Answer:
make the house elevated
How do the valence electrons of an atom affect chemical reactions?
Answer:
Electrons of an atom can affect chemical reactions, because electrons have a negative charge, which can introduce a form of energy.
A certain atom has 22 protons and 19 electrons. This atom loses an electron. The net charge on the atom is now 4+. If this same atom with 22 protons and 19 electrons were to gain 3 electrons, the net charge on the atom would be
Answer: 0
Explanation:
If 3 electrons were to be gained, then the number of protons would equal the number of electrons.
considering the temperature vs. time graph below, how does the temperature at the beginning of a change of state
ompare with the temperature at the end of the change?
O The temperature is always lower.
O The temperature is always the same.
O The temperature is usually lower.
The temperature is usually higher.
Answer:
temp is same
Explanation:
The change of state portionsof the graph are at 2 and 4....and the temp is the same at the beginning and ends.
change of state is a constant temp process