(The radioisotope 224Ra decays by alpha emission via two paths to the ground state of its daughter 94% probability of alpha decay directly to the daughter ground state;(20 pts, 5 pts each)5.5% probability of alpha decay to an excited state before emitting a 0.241 MeV photon in an isomeric transition to reach the ground state of the daughter.a.Write the reaction equation for the alpha decay of 224Ra. b.Calculate the Q-value (in MeV) of this reaction. c.What are the energies (in MeV) of the two associated alpha particles? d.Sketch the decay scheme for the decay of 224Ra with the associated probabilities, energies, and emissions for the a
Answers
Answer:
a) ²²⁴Ra₈₈ ---> α + ²²⁰Rn₈₆ + Q
b) the Q-value of this reaction is 5.789 MeV
c) the energies (in MeV) of the two associated alpha particles are; 5.69 MeV and 5.449 Mev
Explanation:
a)
The decay equation for the alpha decay is expressed as;
²²⁴Ra₈₈ ---> α + ²²⁰Rn₈₆ + Q
b)
Calculate the Q-value (in MeV) of this reaction.
Q = Mparent - Mdaughter -Mg
Q = MRa - MRn -Mg
= 224.020202 - 220.011384 - 4.00260305
= 0.00621495 amu
= 5.789 MeV
therefore the Q-value of this reaction is 5.789 MeV
c)
Energy of alpha particle is expressed as;
E∝ = MQ / ( m + M)
now this is the maximum energy available for the daughter, ²²⁰Rn going to the ground state;
The energy of the alpha particle gives;
E∝ = 220(5.789) / ( 4 + 220) = 5.69 MeV
as given in the question,The other less frequent alpha occurring 5.5% of the time leaves the daughter nucleus in an excited state of 0.241 MeV above the ground state.
Therefore the energy of this alpha is
E∝ = 5.69 - 0.241 = 5.449 Mev
Therefore the energies (in MeV) of the two associated alpha particles are; 5.69 MeV and 5.449 Mev
d)
Sketch of the nuclear decay scheme have been uploaded along side this answer.
(a)[tex]^{224}Ra_{_{88}}=^4\alpha_{_2}+^{220}Rn_{_{86}}+Q[/tex]
(b) the Q-value of the reaction is 5.789 MeV
(c) The alpha particles have energies of 5.69 MeV and 5.449 MeV
Alpha decay:(a) The alpha decay of the radioisotope 224Ra is given by:
[tex]^{224}Ra_{_{88}}=^4\alpha_{_2}+^{220}Rn_{_{86}}+Q[/tex]
(b) The Q-value of a reaction is given by:
Q = {mas of reactants - mass of products}c²
[tex]Q = [M_{224Ra} - M_{\alpha} - M_{220Rn}]c^2[/tex]
Q = (224.020202 - 220.011384 - 4.00260305) amu.c²
Q = 0.00621495 × 931.5 MeV ( since 1 amu.c² = 931.5 MeV)
Q = 5.789 MeV
(c) The energy of the alpha particle is expressed as;
E(α) = MQ / ( m + M)
it is the maximum energy available for the daughter nucleus, ²²⁰Rn going to the ground state.
If the daughter nucleus is at rest then all the energy is carried by the alpha particle.
The energy of the alpha particle is:
E(α) = 220(5.789) / ( 4 + 220) = 5.69 MeV
Now, for the alpha particle occurring 5.5% of the time and leaving the daughter nucleus in an excited state of 0.241 MeV :
The energy of this alpha particle is
E(α) = 5.69 - 0.241 = 5.449 Mev
Learn more about alpha decay:
https://brainly.com/question/2600896?referrer=searchResults
Related Questions
Fatty acids and glycerol are the subunits of the energy storage molecules called
Answers
Answer:
true fats; triglycerides
Explanation:
Which of the following options is correct?
All of the following are chemically modified carbohydrates except
a. galactosamine.
b. cellulose.
c. glucosamine.
d. chitin.
e. glucuronic acid.
Answers
Answer:
b. cellulose.
Explanation:
Cellulose is a polysaccharide consisting of a long chain of repeating glucose units (i.e., β-D-glucose units) that produce long unbranched chains. Cellulose can be considered as a natural polymer (i.e., a non-modified carbohydrate) because it is composed of repeated chains of β-D-glucose molecules stuck together. The cellulose polysaccharide is a principal component of plant cell walls.
How many atoms are in 6.30 moles of selenium (Se)?
x 10
atoms
Answers
Answer:
3.79 e+24
Explanation:
1 mol = 6.022*10^24 atoms
6.30 * ×[tex]\frac{6.022*10^2^3atoms}{1mol}[/tex] = 3.79386*10^24
The answer must have 3 sig figs
A piece of metal with a mass of 611 g is placed into a graduated cylinder that contains 25.1 mL of water rising the water level 256.7 mL what is the density of the metal?
Answers
Answer:
The answer is
2.64 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question
mass = 611 g
volume = final volume of water - initial volume of water
volume = 256.7 - 25.1 = 231.6 mL
The density of the metal is
[tex]density = \frac{611}{231.6} \\ = 2.638169257...[/tex]
We have the final answer as
2.64 g/mLHope this helps you
Which property of matter during a chemical change but does not change during a physical change
Answers
Answer:
The difference between physical change and chemical change is that chemical reaction is composition there is a change in the composition substances in question. In a physical change, there is a difference in the appearence, smell, or simple display of a sample matter
Explanation:
Convert 75 mL of water to gallons (show work)
Answers
Answer:
[tex]\huge\boxed{\sf 75\ mL = 0.02\ gallons}[/tex]
Explanation:
1 mL = 0.000264 gallons
Multiplying both sides by 75
75 mL = 0.000264 * 75 gallons
75 mL = 0.02 gallonswhich has the greatest percentage of oxygen? CO2, NO2,SO2 and MgO?
Answers
Answer:
CO₂
Explanation:
Please see attached picture for full solution.
* The masses of each atom can be found in the periodic table of elements
Select the appropriate shape for the given volume formula
Answers
2. Sphere
3. Rectangular prism
4. Cone
Hope this can help.
Answer: Cylinder , Sphere , Rectangular prism , Cone
i did an online work
What rules can you use to tell how many protons, neutrons and electrons make up an atom or ion?
Answers
Answer:
Explanation:
This question appears incomplete, however
The number of protons of an element/atom (atomic number) can be determined by checking for the position of the element on the periodic table. This is because elements are arranged according to there atomic number on the periodic table.
The number of electrons of any element (of a neutral atom) is equal to the number of protons of the same element.
The number of neutrons of an element/atom is determined by subtracting the atomic number of the element from it's mass number. Hence, mass number is the addition of the atomic number and the number of neutrons.
Ions are charged particles that have the same number of protons and neutrons as there parent atoms. Hence, they have different number of electrons when compared to there specific parent/neutral atom.
A negatively charged atom has more electrons than it's original atom. For example, fluoride ion (F⁻) has 10 electrons while fluorine atom has 9 electrons (meaning fluoride ion has one more electron than it's parent fluorine). The increase is dependent on the number "attached" to the charge. A positively charged atom has less electrons than it's original atom. For example, calcium ion (Ca²⁺) has 18 electrons while calcium atom has 20 electrons (meaning the calcium ion has 2 electrons less than it's parent calcium atom). As said earlier, the decrease here is also dependent on the number "attached" to the charge.
The rule used for the determination of the protons, electrons, and neutrons has been the equal number of protons and electrons, while the number of the neutrons has been the difference in the atomic mass and the protons.
The atom has been the smallest particle that has comprised of electrons, protons, and neutrons as the subatomic particle. The neutrons and protons in the atoms have consisted within the nucleus. The electrons in the atom are revolving around the nucleus.
The atoms have been consisted of an equal number of protons and electrons, while the number of neutrons has been the difference in the atomic mass and the protons.
The ions have been formed with the loss or gain of the electrons by the atom in the terms of valence electrons to complete its octet.
For more information about the electrons and protons, refer to the link:
https://brainly.com/question/803445
The atomic number can tell us how many neutrons are in an atom. Question 4 options: True False
Answers
Answer:
true i think
Explanation:
Let’s take a look at sodium (Na) and chlorine (Cl). Draw what I am describing, and you will see it better. A sodium atom has how many protons? __________ A sodium atom has how many electrons? __________ How many electrons will go in the first shell? __________ How many in the second shell? __________ How many in the third? __________ Now draw this out on the diagram in Figure 2.1, and take a look at it, in particular the third (valence) shell. We know that Na requires eight electrons in its valence shell to become stable. But how many does it have? __________ So, to fill this shell, will it be easier for sodium to steal seven more electrons from another atom, or will it be easier for sodium to give up that one electron and get rid of that third shell? Sodium is simply going to give away that last electron. This means that it will lose an electron (negative charge) but will keep the same number of protons (positive charges). What will the sodium ion’s overall charge be now? _
Answers
A sodium atom has 11 protons and 11 electrons. 2 electrons will go in the first shell, 8 will go in the second shell, and 1 will go in the third shell. Because sodium has 11 electrons, it has one extra in the third shell, making it unstable. It will get rid of that single electron and it’s third shell so it can become stable. After this, there will be more protons than electrons, giving it a positive charge. Hope this helps you and again, the photo holds a lot more detail with some notes and a drawing that can help you. Good luck and stay safe!
Which of these relationships is true of an uncharged atom?
A) The atomic mass is equal to the atomic number.
B) The number of electrons is equal to the number of neutrons.
C) The number of protons is equal to the number of electrons.
D) The atomic mass is equal to the number of electrons.
Answers
Answer:
The correct option is C) The number of protons is equal to the number of electrons.
Explanation:
Atoms are made up of particles called protons, neutrons, and electrons. Protons and neutrons are in the center of the atom and form the nucleus, while electrons surround the nucleus. Electrons have a negative charge. The charge of the protons is positive and finally, the neutrons have no charge.
If the atom has no charge, this means that the total charge of the atomic nucleus, which is positive due to the presence of the protons, is equal to the negative charge of the electrons, so that it cancels out.
So, the correct option is C) The number of protons is equal to the number of electrons.
Which of the following statements is a true statement concerning a reaction that has reached a state of equilibrium?
a. A system has reached equilibrium when there are equal amounts of products and reactants present in the system.
b. A system has reached equilibrium when the rate constant for the forward reaction equals the rate constant of the reverse reaction.
c. A system has reached equilibrium when the reaction has stopped and no more products are formed.
d. A system has reached equilibrium when the concentrations of reactants and products remain constant.
Answers
Answer: A system has reached equilibrium when the concentrations of reactants and products remain constant.
Explanation:
The reactions which do not go on completion and in which the reactant forms product and the products goes back to the reactants simultaneously are known as equilibrium reactions.
The equilibrium is dynamic in nature and the reactions are continuous in nature. Rate of forward reaction is equal to the rate of backward reaction.
Equilibrium state is the state when reactants and products are present but the concentrations does not change with time, that is the concentration remains constant.
An object has a density of 16.3 g/mL and a volume of 0.46 L. Calculate the
mass of the object in pounds.
Answers
Answer:
The answer is
16.50 IbsExplanation:
To find the mass of a substance given the density and volume we use the formula
mass = Density × volumeFrom the question
Density = 16.3 g/mL
volume = 0.46 L
We must first convert the volume from L to mL
If 1 L = 1000 mL
Then 0.46 L = 0.46 × 1000 = 460 mL
Substitute the values into the above formula and solve
That's
mass = 16.3 × 460 = 7498 g
To convert the mass from g to lbs we use the conversion
1g = 0.0022 Ibs
If 1 g = 0.0022 Ibs
Then 7498 g = 7498 × 0.0022
We have the final answer as
16.50 IbsHope this helps you
Scientists are studying different jackets made for extremely cold, snowy weather. They are trying to find jackets that
are warm but also thin enough to allow for natural bodily movement.
Which question could the scientists answer scientifically?
do
O Which jacket's color looks the best?
O Which jacket traps the most heat?
O Would warm and thin jackets cost less?
Which jacket seems the most professional?
Please anybody can ya help me I have this on my test and if I fail I don’t pass this class
Answers
What is the purpose of a salt bridge in an electrochemical cell?
Answers
Answer:
A salt bridge, in electrochemistry, is a laboratory device used to connect the oxidation and reduction half-cells of a galvanic cell (voltaic cell), a type of electrochemical cell. It maintains electrical neutrality within the internal circuit, preventing the cell from rapidly running its reaction to equilibrium.
plants are unable to move to a new location in response to changes in their environment. Which organelle plays a role in maintaining homeostasis in a plant?
Answers
Answer:
Plants are unable to move to a new location in response to changes in their environment. Which of the following organelles plays a role in maintaining homeostasis in a plant? a. Cell Wall b. Chloroplast c. Vacuole d. Nucleus ____ 6. In the diagram below, Cell I and II represent typical cells. In both cells,
Explanation:
:P
Answer:
Vacuole
Explanation:
did it!
There are billions of stars in the known universe. None of them seem to be as bright as the Sun. Which statement gives the best reason why the Sun appears to be the brightest star? A. All-stars have the same apparent brightness, but the Sun has more absolute brightness. B. The Sun is the biggest of all the stars and therefore has the greatest absolute brightness. C. The Sun is the hottest of all the stars and therefore has the greatest absolute brightness. D. The Sun is the closest star to Earth and so it seems brighter than distant stars that have much greater absolute brightness.
Answers
Answer:
The answer is D. The Sun is the closest star to Earth and so it seems brighter than distant stars that have much greater absolute brightness.
Explanation: Stars like red super giants like beetleguise are way brighter and bigger than the sun, but the sun is closest to the earth. It is only in its main sequence stage but seems bright because of its short distance from the sun( 93 million miles).
There are billions of stars in the known universe, none of them seem to be as bright as the Sun beacuse the Sun is the closest star to Earth.
What are stars?Stars are those astronomical bodies which are formed by the mixture of gases mainly of hydrogens and heliums, which are held by its own gravity.
In the universe or in the sky many stars are present which are luminous in appearance but among all of them only sun looks like more brighter, because the distance between the earth and the sun is not that much high as in between the other stars. That's why sun looks more brighter rather than other stars.
So, the Sun is the closest star to Earth and so it seems brighter than distant stars that have much greater absolute brightness.
To know more about sun, visit the below link:
https://brainly.com/question/15837114
A student mixed together 8 g of sugar, 5.20 g of salt
and 100.01 g of flour to make cookies. What is the TOTAL
mass (add them all together) of the mixture expressed with
the correct number of significant figures?
A) 100g
B) 113g
C) 113.21g
D) 113.2g
Answers
its C) 113.21g
u just add all the masses
PLS HELP!!
Nitric acid is made by a sequence of reactions, shown below.
4NH3(g) +5O2(g) = 4NO(g) + 6H2O(g)
2NO(g) + O2(g) = 2NO2(g)
3NO2(g) + H2O(g) = 2HNO3(g)+ NO(g)
If the first reaction occurs with 96.2% yield, the second reaction occurs with a 91.3% yield and the third reaction proceeds with a 91.4% yield,
calculate the following:
(a) The grams of nitric acid produced from 1216 grams of ammonia.
(b) The percent yield for the overall process
Answers
Answer:
from the 1st equation:
4NH3 4NO
4 *(68) 4*30
1216 X mass of NO = 536.5 g
from the 2nd Equation
2NO 2NO2
2*30 2* 46
536.5 x mass of NO2 = 822.6 grams
from the 3rd Equation
3NO2 2HNO3
3*(46) 2* (63)
822.6 X mass of nitric acid = 751.06 gram
b) % yields = ( 96.2%* 91.3% *91.4%)= 80.3%
An ibuprofen suspension for infants contains 100 mg/5.0 mL suspension. The recommended dose is 10 mg/kg body weight. How many mL of this suspension should be given to an infant weighing 18 lb?
Answers
Answer:
32,8mL
Explanation:
1lb=2.2kg
18lb= 8.2 kg
100mg/5mL=20mg/1mL
164mg=32.8mL
Can someone help me please I can’t get this hi
Answers
what was the physical property used by mendleev in creating his periodic table.
Answers
Answer:
melting point and boiling point
How is the le chatelier's principle used to ensure the reaction will go to completion?
Answers
Answer:
This done such that when a reaction is in equilibrium and disturb by and external force which would prevent its completion its adjust so as to offset that external force and still go on to completion
Chelsi has talked to her artist friends about how much money they earn each year from working in the arts. She
gathers these values from seven people: [$1,500; $6,700; $2,200; $8,100; $50,500; $12,000; $2,200).
What is the median of this data set?
$2,200
$6,700
$7,400
$11,900
Answers
Answer: 6,700
Explanation: took the test got it right :) (2020)
Answer:
B 6700
Explanation:
Which compound has the highest boiling point? HF, HI, HBr, HCl, or F2?
Answers
Answer:
HF
Explanation:
This concept can be understood from the knowledge of Intermolecular forces of attraction.
Intermolecular bonds are Van der Waals forces which are weak forces of attraction joining non-polar and polar molecules together. They exist in the form of London Dispersion Forces and Dipole-dipole attraction.
An example of Dipole-dipole attraction is the hydrogen bond which is a unique dipole-dipole attraction between polar molecules in which a hydrogen atom is directly joined to a highly electronegative atom such as fluorine, oxygen, or nitrogen).
Molecules that possess the characteristics of hydrogen bonding have a higher boiling point. In the given question, only HF undergo hydrogen bond due to the electronegative effect of the fluorine element.
F2 occurs as a weak London dispersion force and it occurs between non-polar molecules.
The first periodic table was organized according to atomic mass, but the current periodic table is arranged according to atomic number. why is the atomic number now the basis for the periodic table?
Answers
Answer:
It helps identify trends and group elements with similar properties.
Explanation:
Arranging the elements according to the atomic mass wouldn't help us have groups and periods with predictable properties that we can have when arranging it according to atomic number. Don't forget that isotopes have different masses.
Answer:
Not only on the basis of atomic number its acctually on the basis of their electronic configuration, chemicals properties and physical properties.
Draw the Lewis structure for COCl2, including lone pairs.What is the molecular shape of COCl2? The C - Cl bond in COCl2 is polar or nonpolar? What is the Cl - C - Cl bond angle? The molecule COCl2 is polar or nonpolar?
Answers
Answer:
See explanation
Explanation:
COCl2 Contains two polar C- Cl bonds due to the electro negativity difference between carbon and chlorine.
There are 24 valence electrons in COCl2, the ideal bond angle is 120° based on the valence shell electron pair repulsion theory since the molecule trigonal planar. However, the double bond present compresses the bond angle to about 111°.
The dipoles in COCl2 do not cancel out hence the molecule is polar
The Lewis structure for COCl₂, including lone pairs is attached to the image below.
Carbon (C) has 4 valence electrons, oxygen (O) has 6 valence electrons, and chlorine (Cl) has 7 valence electrons.
In this structure, the oxygen atom is double-bonded to the carbon atom, and there is a single bond between the carbon atom and each chlorine atom. The oxygen atom has 2 lone pairs of electrons.
The molecular shape of COCl₂ is linear. The carbon atom is bonded to two chlorine atoms, and there are no lone pairs on the carbon atom. Therefore, the electron domain geometry is linear.
To learn more about Lewis structure, follow the link:
https://brainly.com/question/4144781
#SPJ6
Write the chemical formula for this molecule
Answers
Answer:
C2H4O
Explanation:
The chemical molecular formula is C2H4O.
Also note*: Acetaldehyde is the chemical name for this structural formula.
A graduated cylinder is filled with 3 mL of water. A toy car that
weighs 29 g is gently placed in the cylinder and the water level
rises to 19 mL. What is the density of the toy car? Round to the
thousandths place.
Answers
Answer:
Density = 1.813 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]Density = \frac{mass}{volume} [/tex]
From the question
mass of toy car = 29 g
Volume = New volume - original volume of water in cylinder
That's
volume = 19 - 3 = 16 mL
Substitute the values into the above formula and solve for the density
That's
[tex]Density = \frac{29}{16} \\ = 1.8125[/tex]
We have the final answer as
Density = 1.813 g/mL to the nearest thousandth
Hope this helps you
Answer:
1.813 g/mL
Explanation:
The density can be found with the following formula.
[tex]d= \frac{m}{v}[/tex]
where [tex]m[/tex] is the mass and [tex]v[/tex] is the volume.
We know the mass is 29 grams. We must find the volume.
The volume is equal to the volume of water that is displaced. Subtract the initial volume of water from the final volume.
⇒ final volume - initial volume of water
The initial volume of water is 3 mL and the final volume is 19 mL.
⇒ 19 mL - 3 mL
⇒ 16 mL
The volume of the toy car is 16 mL.
Now we know the mass and the volume.
[tex]m= 29g\\v=16mL[/tex]
Substitute the values into the formula.
[tex]d=\frac{m}{v}[/tex]
[tex]d=\frac{29g}{16mL}[/tex]
[tex]d=1.8125 g/mL[/tex]
Round to the nearest thousandth. The 5 in the ten thousandth place tells us to round the 2 to a 3.
[tex]d\approx1.813 g/mL[/tex]
The density of the toy car is about 1.813 grams per milliliter.