Answer:
220.9g of water are required
Explanation:
The molar enthalpy of vaporization is defined as the heat released when 1 mole of water changes from liquid to gas.
For water, 1 mole releases 40.79kJ. To release 500kJ are necessaries:
500kJ * (1mol / 40.79kJ) = 12.26 moles are necessaries
To convert moles to grams we must use the molar mass (H2O = 18.02g/mol):
12.26 moles * (18.02g / 1 mol) =
220.9g of water are required9)
How many grams are in 4.5 moles of sodium hydroxide (NaOH)?
Answer:
179.986995
Explanation:
1 mole is equal to 39.99711 grams.
so muitiply 39.99711 by 4.5 and get 179.986995
Calculate the mass (in grams) of 3.01x1021 atoms of cobalt (Co).
What name describes the top-level aquifer?
A. easy aquifer
B. well of water
C. perched water table
D. top-level water table
Answer:
A
Explanation:
because the rain go down in the earth
Create the Equation: How many grams of Aluminum Chloride would be made in a reaction between 50.0 g of Aluminum and 125g of Magnesium Chloride?
Answer:
0g
Explanation:
Magnesium is more reactive than aluminium so no reaction occurs
How much energy is released when 6.0 g of water is condensed from water to vapor?
Answer:6.0g x 1 mol/18.02g x 40,65 kJ/mol
Explanation: just did the quiz
13.6 kilojoules (kJ) of energy is released when 6.0 g of water is condensed from water to vapor.
To calculate the energy released when 6.0 grams of water is condensed from water to vapor, we need to use the concept of heat of vaporization (also known as enthalpy of vaporization). The heat of vaporization is the amount of energy required to change one gram of a liquid into vapor at its boiling point, without any change in temperature.
The heat of vaporization of water is approximately 40.7 kJ/mol at its boiling point (100°C or 373.15 K). We can use this information to calculate the energy released when 6.0 grams of water is condensed.
Step 1: Calculate the number of moles of water (H₂O) in 6.0 grams.
Molar mass of water (H₂O) = 2 g/mol (for hydrogen) + 16 g/mol (for oxygen) = 18 g/mol
Number of moles of water = Mass of water / Molar mass of water
Number of moles of water = 6.0 g / 18 g/mol = 0.333 moles
Step 2: Calculate the energy released during condensation.
Energy released = Number of moles of water × Heat of vaporization
Energy released = 0.333 moles × 40.7 kJ/mol = 13.6 kJ
Therefore, approximately 13.6 kilojoules (kJ) of energy are released when 6.0 grams of water is condensed from water to vapor.
To know more about condensed here
https://brainly.com/question/1447093
#SPJ2
explain what thermal energy is and use real life examples to support your explanation (science)
Answer:
boiling water on a stove is an example of thermal energy thermal energy produced when the atoms and molecules is in a substance vibrate faster due rise in temperature .
PLEASE mark brainlest ......... please
need help i will give you thanks:)
Answer:
Precipitation
Explanation:
Precipitation is when water falls from the clouds back to earth as rain, snow, or hail. The water returns to the rivers to continue the water cycle. So, the answer is D, precipitation.
I hope this helps :)
Answer:
Vapor Information
Explanation:
Atmospheric rivers are relatively long, narrow regions in the atmosphere like rivers in the sky that transport most of the water vapor outside of the tropics. Not all atmospheric rivers cause damage, and most are weak systems that often provide beneficial rain or snow that is crucial to the water supply.
(You're welcome and have a nice day/night Ma'am/Sir.)
Periodic table 50 elements with thier valancies
Answer:
The first 50 elements along with their valences are given below :
1. Hydrogen = 1
2. Helium = 0
3. Lithium = 1
4. Beryllium = 2
5. Boron = 3
6. Carbon = 4
7. Nitrogen = 3
8. Oxygen = 2
9. Fluorine = 1
10. Neon = 0
11. Sodium = 1
12. Magnesium = 2
13. Aluminium = 3
14. Silicon = 4
15. Phosphorus = 3
16. Sulphur = 2
17. Chlorine = 1
18. Argon = 0
19. Potassium = 1
20. Calcium = 2
21. Scandiun = 3
22. Titanium = 3
23. Vanadium = 4
24. Chromium = 3
25. Manganese = 4
26. Iron = 2
27. Cobalt = 2
28. Nickel = 2
29. Copper = 2
30. Zinc = 2
31. Gallium = 3
32. Germanium = 4
33. Arsenic = 3
34. Selenium = 2
35. Bromine = 1
36. Krypton = 0
37. Rubidium = 1
38. Strontium = 2
39. Yttrium = 3
40. Zirconium = 4
41. Niobium = 3
42. Molybdenum = 3
43. Technetium = 7
44. Ruthenium = 4
45. Rhodium = 3
46. Palladium = 4
47. Sliver = 1
48. Cadmium = 2
49. Indium = 3
50. Tin = 4
Note :
An element like Iron, copper can have more than one valencies.
Answer:
50 elements chemical eq, atomic number, atomic mass, no.of electrons, no.of protons, no.of neutrons, electronic configuration and valancies are given in the above attachment
Explanation:
Hope it helps you
which would have higher entropy? solid ice, liquid water at 30C, liquid water at 60C, Water vapor
Answer:
liquid water
Explanation:
becouse liquid water is 30C
Answer:
one: b
two: b
three: a
four: b
Explanation:
Balance the following skeletal equation:
Li(s) + H2O(1) -------> -------> LiOH(aq) + H2(g).
Answer:
I think above answer is fully correct. Mark it brainliest
One orbit of the earth around the sun equals _____________ miles.
595 million
360 million
5,280
Answer:
it's about 580millon, but the closest you have is 595 million, so pick that one
Answer:
should be 595 !
Explanation:
How many molecules are in 6.20 moles of CaCO3?
1 mole is equal to 1 moles CaCO3, or 100.0869 grams.
What is mole?A mole is just a measuring scale. In reality, it's one of the International System of Units' seven foundation units (SI). When already-existing units are insufficient, new ones are created.
The mole is a SI unit that is used to quantify any quantity of a substance. The word "mole" is shortened to "mol".
A mole consists of precisely 6.022140761023 particles. The "particles" could be anything, from tiny things like electrons or atoms to enormous things like stars or elephants.
Therefore, 1 mole is equal to 1 moles CaCO3, or 100.0869 grams.
To learn more about moles, refer to the link:
https://brainly.com/question/26416088
#SPJ2
A student lives in a place that receives lots of snow and ice during the winter. The student has observed that the highway department spreads salt on the road after a snowfall. Which of the following correctly explains why the highway department uses salt on the roads?
Salt lowers the freezing point of water, which makes the melted snow on the road less likely to form ice.
Salt raises the freezing point of water, which makes the melted snow on the road less likely to form ice.
Salt raises the vapor pressure of water, which makes the melted snow more likely to evaporate before it freezes.
Salt lowers the osmotic pressure of water, which makes the melted snow more likely to be absorbed into the ground before it freezes.
Answer:
Salt lowers the freezing point of water, which makes the melted snow on the road less likely to form ice.
Answer:
A
Explanation:
Edge.
If you react 59.54 g of S and 78 g of HNO3, how many grams of NO2 can you
theoretically produce?
S + 6 HNO3 + H2SO4 + 6 NO2 + 2 H2O
Answer:
56.94759 grams of NO2
Explanation:
Stoichiometric Equation:
1 S + 6 HNO3 → 1 H2SO4 + 6 NO2 + 2 H2O.
This is so you can create ratios between each compound in the reaction, and identify the limiting and excess reactants to determine exactly how much can be produced?
The coefficients or molecular quantity of each compound in the balanced equation represents the amount of moles.
To figure out how much can be produced, you have to convert 59.54 g of S into moles of S and 78 g of HNO3 into moles of HNO3.
A reference such as a periodic table can be very helpful as it has the atomic mass of each element which is the mass with respect to 1 mol of that element.
Organelle X is a -
A.
mitochondrion, which makes energy for the cell.
B.
ribosome, with carries proteins within the cell.
C.
centriole, which helps divide the cell in two.
D
lysosome, which helps digest substances inside the cell.
Answer:
A.
Explanation:
Please help me with this homework
Which of the following movements of ocean water has the greatest direct effect on the growth of producers.
A. Upwelling
B. Deep Current
C. Surface Current
D. Convection Current
Answer:
A- Upwelling
Explanation:
what happens when you burn magnesium in air
It forms a white powder
Explanation:
Oxygen and magnesium combine in a chemical reaction to form this compound. After it burns, it forms a white powder of the magnesium oxide. Magnesium gives up two electrons to oxygen atoms to form this powdery product. This is an exothermic reaction.
molecular formula of CH2O, 120 g/mol
The following are properties of metals except:
1
Conducts electricity
2
Gas at room temperature
3
High lustre
4
Ductile
2 because metals are solid at room temperature
Answer:
Except 2- gas at room temperature
Explanation:
The reaction of perchloric acid (HClO4) with lithium hydroxide (LiOH) is described by the equation: HClO4 + LiOH → LiClO4 + H2O Suppose 100 mL of perchloric acid is neutralized by exactly 46.9 mL of 0.75 M lithium hydroxide. What is the concentration of the perchloric acid?
Answer:
[HClO₄] = 0.35 M
Explanation:
Neutralization reaction is:
HClO₄ + LiOH → LiClO₄ + H₂O
In this case, we have a titration between a weak acid and a strong base.
In chemistry it is also called an acid base equilibrium.
HClO₄ + H₂O ⇄ ClO₄⁻ + H₃O⁺ Ka
The weak acid is firstly neutralized by the strong base, in order to have a buffer solution before the equivalence point.
When we reach the equivalence point, mmoles of acid = mmoles of base and there is a formula to determine it so:
M acid . Volume of acid = M base . Volume of base
M acid . 100 mL = 0.75 M . 46.9 mL
M acid = (0.75 M . 46.9 mL) / 100 mL → 0.35 M
4.6 moles of a gas are at a temperature of 325 K and a volume of 96.8 L, what is the pressure of the gas
Answer:
1.27atm is the pressure of the gas
Explanation:
Using combined gas law, we can find the pressure of a gas with the moles, temperature and volume of the gas. The formula is:
PV = nRT
P = nRT / V
Where P is pressure in atm
n are the moles of the gas: 4.6 moles
R is gas constant: 0.082tamL/molK
T is absolute temperature: 325K
V is volume: 96.8L
Replacing:
P = 4.6mol*0.082atmL/molK*325K / 96.8L
P = 1.27atm is the pressure of the gas
What processes and involved in the creation of sedimentary rock? Please help
Answer:
yuhhhhhhhhhhh
Explanation:
Find the concentration of a sample of chlorous acid if 35.5 mL
of 0.120 M NaOH is needed to titrate 10.0 mL of the acid.
M
Answer: 71
Explanation:the is not correcy
Answer: 0.426
I don’t know how to explain
What is the difference between the reaction of CH3COOH with H20 and with OH?
Answer:
Explanation: CH3COOH(aq) + H2O(l) ↔ CH3COO-(aq) + H3O+(aq) acid base ... sulfuric acid can react with either OH- or. H.
Food chains always begin with what type of organism? Why?
What is the oxidation number for S in the compound SO3? (Recall that O has an oxidation number of –2.) A. 0
Answer:
[tex]\boxed {\boxed {\sf +6}}[/tex]
Explanation:
A compound must have a net charge of 0. The charges have to balance each other out and equal 0.
We have the compound sulfur trioxide with a chemical formula of SO₃.
Oxygen (O) has an oxidation state of -2, which means it will have a charge of -2 in the compound. However, note there is a subscript after the O in the chemical formula. Therefore, there are 3 oxygen atoms in the compound and each one has a charge of -2. The oxygen has an overall charge of -6 because 3*-2 = -6.
There is only one atom of sulfur (there is no subscript, so a 1 is implied). It has to balance out the -6 charge of the oxygen atoms, so it must be +6.
The oxidation number for sulfur is +6 in the compound sulfur trioxide.
Answer:
+6
Explanation:
edge 2021!
N sub 2 +3H sub 2 rightwards arrow 2NH sub If 6 liters of hydrogen gas are used, how many liters of nitrogen gas will be needed for the above reaction at STP
Answer:
2L of nitrogen gas will be needed
Explanation:
Based on the following reaction:
N₂ + 3H₂ → 2NH₃
1 mole of nitrogen reacts with 3 moles of hydrogen to produce 2 moles of ammonia.
If 6L of hydrogen (In a gas, the volume is directly proportional to the moles, Avogadro's law) react, the volume of nitrogen gas required will be:
6L H₂ * (1mol N₂ / 3 moles H₂) =
2L of nitrogen gas will be neededDefine what coal is, explain how it forms, and what it is
used for today
Answer:
the main use of coal in the United States is to generate electricity.
Coal is a combustible black or brownish-black sedimentary rock with a high amount of carbon and hydrocarbons
Coal is formed when dead plant matter decays into peat and is converted into coal by the heat and pressure of deep burial over millions of years.
What is the process of old crust sinking back into the mantle? *
a. earthquake
b. transform boundary
c. seafloor spreading
d. subduction
Answer:
dddddddddddddd
ddddddddddddddddd