Answer: Is three times the height of Mt. Everest
Explanation:
Using the process of elimination we can rule out “D” Because its a volcano, C because it says we have visited mars 44 times not the volcano, B because in the passage is literally says “3 times the size of Mt. Everest”.
You push the sofa across the floor. Which force is NOT present on the sofa?
a)gravity
b)normal
c)tension
d)applied
Answer:
c) tension ........ ........
Answer:
gravity
Explanation:
because it cannot be move across if there is present gravity force
P1= 100 kPa
V1= 5 L
T1= 300 degrees Kelvin
P2=100 kPa
V2= ? L
T2= 350 degrees Kelvin
Explanation:
using Charles law; since the pressure is constant
V1/T1 = V2/T2
5/300 = V2/350
cross multiply
V2 X 300 = 5 X 350
V2 = 1750/300
V2 = 5.833L
What did Dr Allan McInnes say was required in order to launch a satellite into space, at the necessary altitude and speed? What is required and why?
which type of forces would be experienced by a sled that is being pulled by a rope (choose 4)
Given w= 4+,- 0.02 A=2.0+,-0.2 and 3.0+,-0.6 what is the value of w\ A y square
Explanation:
w = (4.52 ± 0.02) cm, x = ( 2.0 ± 0.2) cm, y = (3.0 ± 0.6) cm. Find z = x + y - w and its uncertainty.
z = x + y - w = 2.0 + 3.0 - 4.5 = 0.5 cm
Dz = Dx + Dy + Dw = 0.2 + 0.6 + 0.02 = 0.82 rounding to 0.8 cm
So z = (0.5 ± 0.8) cm
Solution with standard deviations, Eq. 1b, Dz = 0.633 cm
z = (0.5 ± 0.6) cm
Notice that we round the uncertainty to one significant figure and round the answer to match.
A shopper walks westward 5.4 meters and then eastward 7.8 meters
Answer:
13.2 meters
Explanation:
(5.4) + (7.8)
What does it mean when an
electromagnetic wave has low energy?
A. it has a long wavelength
B. It has a short wavelength
C.it has a short amplitude
D. It has a high frequency
Answer:
A
Explanation:
Low energy photons (such as radio photons) behave more like waves, while higher energy photons (such as X-rays) behave more like particles.
Please give brainliestAnswer:
B. It has a short amplitude.
:)
I need help asap please
Will give BRAINLIST for correct answers only
Thank you
A force of 225 N at an angle of 30 degrees to the horizontal displacement. The component of the force that will cause work to be done is?
Answer:
225cos30
Explanation:
Force in the direction of the work done
How does a balanced chemical equation demonstrate the Law of Conservation of Mass?
Answer:
It shows the same number of atoms of each element on both sides of the equation
A balanced equation demonstrates the conservation of mass by having the same number of each type of atom on both sides of the arrow.
Explanation:
Matter cannot be created or destroyed in chemical reactions. This is the law of conservation of mass. In every chemical reaction, the same mass of matter must end up in the products as started in the reactants. Balanced chemical equations show that mass is conserved in chemical reactions.
A balanced chemical equation shows that total number of atoms before reaction is equal to total number of atoms after the reaction. As, the total mass of any object lies on its atom, a balanced chemical equation demonstrate the Law of Conservation of Mass.
What is Dalton's atomic theory?The Dalton's atomic theory is as follows:
Atoms are the incredibly minuscule building blocks of all stuff.A given element's atoms are all the same size, mass, and other characteristics. Distinct elements' atoms have different mass, size, and other characteristics.Atoms can never be divided, produced, or eliminated.Chemical compounds can be created by combining atoms of various elements in straightforward whole number ratios.Atoms can be joined together, split apart, or altered during chemical processes.The total number of atoms before and after a reaction are equal, according to a chemical equation that is in balance. A balanced chemical equation illustrates the Law of Conservation of Mass since every object's atom holds the entirety of its mass.
Learn more about Dalton's atomic theory here:
https://brainly.com/question/15507302
#SPJ5
A cannon is fired with an initial horizontal velocity of 20 m/s and initial vertical velocity of 25 m/s. After 3s in the air, the canon hits it’s target. How far away(in meters) was the canon from its target? Answer:_____m
Answer:
60 m
Explanation:
After 3 seconds of travel at 20 m/s, the projectile is 3·20 = 60 meters horizontally from the cannon.
__
The vertical height after 3 seconds is 0.9 m, so the straight-line distance from cannon to target is √(60^2 +0.9^2) ≈ 60.007 meters.
I NEED A 100% ACCURATE ANSWER FOR THIS QUESTION ASAP NO LINKS !!!
Answer:
The answer is static friction. This is the friction that involves objects that do not move.
Explanation:
Friction is a force which opposes the motion of one object moving relative to another. static friction and kinetic friction are the two type of friction.
Static friction is that type of friction which keeps an object at rest. Force must be applied greater than static friction to move an object. Therefore it is the static friction which helps the pile of rocks from falling apart.
(Brainiest and thanks appreciated)
Answer:
static friction
Explanation:
I did a test like this yesterday same question different object
Using Newton’s first law of physics, which explains why it is harder to swim in water with a current (like the ocean) than in contained water (like a pool)?
A.
Perpetual motion can only be interrupted by an unbalanced force.
B.
The current will interfere with perpetual motion more than still water.
C.
It takes much more strength to swim if there is a current than in a pool.
D.
Still water is an immovable object, but currents have their own momentum.
Answer:
It isn't A.
Explanation:
I got it wrong with the answer A.
it is harder to swim in water with a current (like the ocean) than in contained water (like a pool) because Still water is an immovable object, but currents have their own momentum. The correct option is D.
What is Newton's first law of motion?Newton's first law of motion, also known as the law of inertia, states that "an object at rest will remain at rest, and an object in motion will remain in motion with a constant velocity unless acted upon by an unbalanced force."
This means that an object will continue to move in a straight line at a constant speed unless an unbalanced force acts upon it. In addition, if an object is at rest, it will remain at rest unless acted upon by an unbalanced force.
The law of inertia can be applied to many situations. For example, if a book is sitting on a table, it will remain at rest until a force is applied to it. Similarly, if a ball is rolling on a flat surface, it will continue to roll at a constant speed in a straight line unless a force, such as friction, slows it down or changes its direction.
This law is fundamental to understanding the behavior of objects in motion, and it forms the basis for the other two laws of motion formulated by Sir Isaac Newton.
Here in the Question,
Swimming in a pool versus swimming in the ocean, the difference lies in the presence of a current in the ocean.
The current in the ocean has its own momentum, and when a swimmer enters the water, they are faced with an additional force that they must overcome to move forward. This means that the swimmer must apply more force and use more energy to overcome the force of the current and move forward in the water.
In still water, on the other hand, there is no external force acting on the swimmer, so they only have to overcome the resistance of the water itself to move forward.
Therefore, The correct answer is D i.e Still water is an immovable object, but currents have their own momentum.
To know more about Newton's third law click:
https://brainly.com/question/29768600
#SPJ3
A laser emits a light beam with a wavelength of 630 nm. The jet passes a liquid with a refractive index of 1.3.
What is the wavelength of the light beam in the liquid?
Pendulum mass is 4 kg. Use your equations for gravitational potential energy and kinetic energy to determine these values based on the data given below. Total energy is the sum of gravitational potential energy and kinetic energy. In this problem, round gravity to: g = 10 m/s2.
its should be 2.0 and 4.5 on it
A driver started from origin and drove 5 km towards east, he then drove 3 km due west. His displacement is:
a. 2 km
b. 8 km towards east
c. 2 km towards east
d. 8 km
Answer:
c. 2 km towards east
Explanation:
A golf ball is launched horizontally at a speed of 11 meters per second and a high of 6.4 m above the ground. How long will it take for the golf ball to reach the ground?
The answer is A.
t = ( 2h / g )^1/2 = ( 2 x 6.4 / 9.8 )^1/2 = 1.14s
a car in tally at rest pics up and velocity of 72 km/h ^−1over a distance of 25m the acceleration of car is
Answer:
16 m/s^2
You find out the time first which is 1.25s
When you describe a liquid as thick, are you saying that it has a high or a low viscosity?
The liquid with greater thickness will be more viscous since it flow speed is lower. Therefore, the more thick liquids is more viscous and flow slowly.
What is viscosity ?Viscosity of a liquid is the resistance to its flow. Viscosity depends on the density and thickness of the liquid. The more thicker the liquid the more viscous it will be.
Less thick liquids will flow fastly. For example water is a less viscous liquid as we see it flow so quickly. Whereas, honey, oil, etc are more viscous and the mobility of their liquid particles are resisted by viscosity.
The more viscous liquids generally has higher specific heat capacity as in the case of water and oil. The particle - particle attractive force is higher in highly viscous liquids.
Find more on viscosity:
https://brainly.com/question/13385698
#SPJ2
A 63 kg boy and sled are pulled along level ground with a force of 577 N. The boy and sled
are moving at a constant velocity of 2.4 m/s. What is the size of the frictional force?
Answer:
The size of the frictional force is 577 N.
Explanation:
What is frictional force?Frictional forces are exerted every time you have two surfaces sliding across one another. Friction depends on:
how rougher are the surfaces on contact;how harder you push one surface to the other.There are two types of friction:
static friction [tex]f_s[/tex];dynamic (sliding) friction [tex]f_d[/tex].Now let's attack the problem:
First, you have to write the data down:
[tex]\bullet \quad m= 63\,kg\\\\\bullet \quad F= 577\,N\\\\\bullet \quad v= 2.4\,m/s[/tex]
If the boy and the sled moves on constant velocity, Newton's First Law Of Motion states that the net force acting on them must be zero:
[tex]F_{net}=0[/tex]
Applying Newton's Second Law Of Motion, we get:
[tex]F-f_d=0[/tex]
which means that:
[tex]F=f_d[/tex]
In other words, the dynamic frictional force equals the force that moves the boy and sled. So we may write:
[tex]\boxed{f_d=577\,N}[/tex]
Conclusion: the size of the (dynamic) frictional force is 577 N.
Happy studying!
Brainly Team
In a closed system of a cannon and cannonball, which changes would both result in an increase in the kinetic energy of the cannonball when fired from the cannon?
Answer:
the length of the cannon
the power of the gunpowder
Answer:
i would say B decrease mass of cannon or decrease mass of cannon ball
Explanation:
because when you fire the cannon the cannon ball and powder exit the cannon then that leaves the cannon ball and i would say that the explosion would force it out the cannon but would not increase its mass.
please help!! i’ll mark you the brainliest answer
A box of mass 4kg is being pulled along a rough surface to the right, as shown below. When F=8N, the box accelerates to the right 1m/s^2. If F is doubled to 16N, the acceleration of the box across the same rough surface will be:
A) 1m/s^2
B) 2 m/s^2
C) 3 m/s^2
D) 4 m/s^2
E) 0.5 m/s^2
Hi there!
Recall that:
∑F = ma
In the given situation, there is acceleration occurring in the horizontal direction, so there is a net force.
∑F = Fa (Force applied) - Fκ (Force due to kinetic friction)
We can plug in given values to solve for the frictional force:
ma = Fa - Fκ
(4)(1) = 8 - Fκ
4 = 8 - Fk
Fκ= 4N (negative since working opposite to acceleration)
Now, solve given the new force:
4a = 16 - 4
4a = 12
a = 3 m/s², Answer C.
how would a rock respond to stresses applied at depth?
The rock will compress as the stress applied increases with depth and it will break when it cannot withstand the stress.
The pressure or stress on the rock is defined as force per unit area of the rock which equally increases with depth. This can be expressed as follows;
[tex]P= \frac{F}{A}\\\\P = \rho gh[/tex]
where;
P is the pressure applied to the blockA is the area of the rock h is the depth in which the rock is subjected to g is acceleration due to gravityThus, we can conclude that the stress on the rock will increase with increase in depth. The rock will compress as the stress applied increases with depth and it will break when it cannot withstand the stress.
Learn more here:https://brainly.com/question/772926
Guide Questions:
1. What is the speed of sound at the lowest temperature? __________________
2. What is the speed of sound at the highest temperature? _________________
3. At which temperature the speed of sound slowest? _____________________
4. At which temperature the speed of sound fastest? _____________________
5. Does temperature affect the speed of sound? Explain ___________________
Answer:
1- 330.4m/s
2-358.0m/s
3- -1c
4- 45c
5- when temperature increase speed of sound will increase
1. The speed of sound at the lowest temperature in the image is 330.4 m/s.
2. The speed of sound at the highest temperature in the image is 358.0 m/s.
3. The temperature at which the speed of sound is slowest is -1°C.
4. The temperature at which the speed of sound is fastest is 45°C.
5. Yes, temperature affects the speed of sound.
The image shows the relationship between temperature and speed of sound in air. The x-axis of the graph shows the temperature in degrees Celsius, and the y-axis shows the speed of sound in meters per second. The line on the graph shows that the speed of sound increases with temperature. For every 1 degree Celsius increase in temperature, the speed of sound increases by about 0.6 m/s.
The speed of sound in air is also affected by other factors, such as humidity and air pressure. However, temperature is the most important factor affecting the speed of sound.
The speed of sound at the lowest temperature in the image is 330.4 m/s, which is at -1°C.
The speed of sound at the highest temperature in the image is 358.0 m/s, which is at 45°C.
The temperature at which the speed of sound is slowest is -1°C.
The temperature at which the speed of sound is fastest is 45°C.
Yes, temperature affects the speed of sound. The speed of sound increases with temperature. This is because the molecules of a medium vibrate faster at higher temperatures, and this allows sound waves to travel more quickly.
To know more about speed here
https://brainly.com/question/6280317
#SPJ3
how does the interstellar medium affect our view of most of the galaxy?
Answer: It prevents us from seeing most of the galactic disk with visible and ultraviolet light.
(hope this helps) :)
what if water didnt have a negative charge?
Describe the relationship between the state of matter of water (gas, liquid, solid) and the motion of the water molecules.
Answer:
ok
Explanation:
solid- molecules are close together and vibrating
liquid - molecules are loser, faster moving and take the shape of its container
gas- fast moving molecules and take whatever shape they want (like a room or the air outside)
Explanation:
Solids: The inter-molecular attraction force is the highest and the inter-molecular distance is the least. Solids have definite shape and volume.
Liquids: The inter-molecular attraction force is less than that of solids and the inter-molecular distance is more than solids. Liquids have definite volume but no definite shape.
Gases: The inter-molecular attraction force is the least and the inter-molecular distance is the highest. Gases have no definite shape or volume.
Ok, so the runner then goes from 20m to 11m. Distance? Displacement?
Answer:
honestly a bit confused by the question, but this would be a 9 meter difference in the distance, moving from 20m to 11m
Explanation:
white light such as that from the sun is actually only ultraviolet light.?
Answer:
no
Explanation:
White light, which is the visible light, from the sun contains all the rainbow colors; however, ultraviolet is a radiation emitted from the sun and it is nonvisible to humans.
No white light and ultraviolet light are the two types of radiation coming from the sun.
What are solar radiations?The light coming from the sun contains different types of radiation that travel at different wavelengths this radiation is called solar radiation.
Types of solar radiation are visible light, ultraviolet light, infrared, radio waves, X-rays, and gamma rays.
Due to this visible light, we can see on earth because it has the frequency that our eyes can see.
visible light contains seven colors that are at different wavelengths. So when the diffraction of visible light takes place we can see these seven colors.
Thus white light and ultraviolet light are the two types of radiation coming from the sun.
To know more about Visible light follow
https://brainly.com/question/10728818
Angelica has sprained her ankle and needs to stay off it for a few weeks, which is really frustrating because she is on the track team. She is worried that a prolonged period of inactivity will hurt her training. After about 10 days, she thinks that she can start working out gradually if she takes painkillers right before her workout. What is the BEST response to Angelica?
OPTIONS:
A.
She could really injure herself with this plan since she will not feel pain.
B.
Trying it once or twice and seeing how she feels is probably the best way to go.
C.
It is a common technique and lots of athletes practice injured so she will be fine.
D.
The damage from working out is probably less than the issue exercise will create.
PLEASE NO LINKS
Answer:
I think the answer is c
Explanation:
Because It is a common technique and lots of athletes practice injured so she will be fine.
By working on the given plan, Angelica can injure herself since she will not feel pain. The correct option is A.
What is ankle sprain?A sprain takes place when your ankle is compelled to move out of its regular place, causing one or more of the ligaments in your ankle to stretch, partially tear, or completely tear.
A sprained ankle can be caused by a fall that causes your ankle to twist. Landing on your foot awkwardly after jumping or pivoting.
You should avoid strenuous exercises, such as running, until the pain and swelling have subsided, but you should keep moving so that the muscles and ankle do not stiffen. Once your ankle is less painful, begin some gentle exercises.
As she is having ankle sprain, and she is planning to take pain killers and start to work out, this can cause her even more problem as she will not feel any pain.
Thus, the correct option is A.
For more details regarding sprain, visit:
https://brainly.com/question/1079366
#SPJ5
what is heliocentric model?
Answer:
A model of the solar system with the sun in the middle
Explanation: