The t(20) distribution is wider than the t(40) distribution, For the same value of t, the t(40) distribution has the smallest tail area and for the same middle area C, the t(20) distribution has the largest t* critical value.
a. Which distribution is wider?
The t(20) distribution is wider than the t(40) distribution. As the degrees of freedom increase, the t distribution approaches the standard normal distribution, and its width decreases.
b. For the same value of t, which distribution has the smallest tail area?
For the same value of t, the t(40) distribution has the smallest tail area. As the degrees of freedom increase, the distribution becomes more concentrated around the mean, and the tails become smaller.
c. For the same middle area C, which distribution has the largest t* critical value?
For the same middle area C, the t(20) distribution has the largest t* critical value. With fewer degrees of freedom, the distribution is wider and requires a larger t* value to cover the same middle area as compared to the t(40) distribution.
a. The t(40) distribution is wider than the t(20) distribution. This is because as the degrees of freedom increase, the t-distribution approaches a standard normal distribution, which has a smaller variance than the t-distribution with fewer degrees of freedom.
b. For the same value of t, the t(40) distribution has the smallest tail area. This is because as the degrees of freedom increase, the t-distribution approaches a standard normal distribution, which has smaller tail areas than the t-distribution with fewer degrees of freedom.
c. For the same middle area C, the t(20) distribution has the largest t* critical value. This is because as the degrees of freedom decrease, the t-distribution has heavier tails, which require larger t* values to maintain the same middle area C.
Learn more about Area here: brainly.com/question/27683633
#SPJ11
helppppp please finding the area please give explanation and answer thank youu!!!
Answer:
height = 10 m
lengths of bases = 5 m and 10 m
[tex] \frac{1}{2} (10)(5 + 10) = 5(15) = 75[/tex]
So the area of this trapezoid is 75 square meters.
Check the picture below.
[tex]\textit{area of a trapezoid}\\\\ A=\cfrac{h(a+b)}{2}~~ \begin{cases} h~~=height\\ a,b=\stackrel{parallel~sides}{bases~\hfill }\\[-0.5em] \hrulefill\\ a=5\\ b=10\\ h=10 \end{cases}\implies A=\cfrac{10(5+10)}{2}\implies A=75~m^2[/tex]
What is the distance from Point A to Point B? Round your answer to the nearest tenth if necessary.
(Hint: sketch a right triangle and use the Pythagorean theorem.)
Answer:
the ans is 6.4
Step-by-step explanation:
using the distance formula
d^2= (x2-x1)^2 + (y2-y1)^2
d^2= (8-4)^2 + (8-3)^2
d^2= (4)^2 + (5)^2
d^2= 16+ 25
d^2= 41
d= sqrt of 41*
d= 6.4units
a faulty watch gains 10 seconds an hour if it is set correctly at 8 p.m. one evening what time will it show when the correct time is 8 p.m. the following evening
When the correct time is 8 p.m. the following evening, the faulty watch, which gains 10 seconds an hour will show 8:04 p.m.
How the time is determined?The time is determined using the mathematical operations of division and multiplication.
The time that the faulty watch gains per hour = 10 seconds
The total number of hours from 8 p.m. one evening to the next = 24 hours
The total number of seconds that the faulty watch must have gained during the 24 hours = 240 seconds (24 x 10)
60 seconds = 1 minute
240 seconds = 4 minutes (240 ÷ 60)
Thus, while the correct time is showing 8 p.m., the faulty watch will be showing 8:04 p.m.
Learn more about mathematical operations at https://brainly.com/question/4721701.
#SPJ1
determine whether the set s = {1, x^2, 4 + x^2} spans P_2.O S spans P_2O S does not span P_2
Given Set S is S spans P_2.
What is indetail answer of the given question?The set S = {1, x², 4 + x²} spans P_2 if every polynomial in P_2 can be expressed as a linear combination of 1, x², and 4 + x².
Let's consider a general polynomial in P_2, which has the form ax^2 + bx + c, where a, b, and c are constants. We need to determine if there exist constants k1, k2, and k3 such that:
ax² + bx + c = k1(1) + k2(x²) + k3(4 + x²)
Simplifying the right-hand side gives:
ax² + bx + c = (k2 + k3)x² + 4k3
For this equation to hold for all values of x, we must have a = k2 + k3, b = 0, and c = 4k3. Therefore, every polynomial in P_2 can be expressed as a linear combination of the elements in S if and only if we can find constants k1, k2, and k3 that satisfy these equations.
Solving the equations, we get:
k1 = 4k3 - a
k2 = a - k3
k3 is free
Since k3 is a free variable, we can choose it to be any value we like. This means that we can always find constants k1, k2, and k3 that satisfy the equations, and so S spans P_2.
Therefore, the answer is S spans P_2.
Learn more about spans.
brainly.com/question/30358122
#SPJ11
The area of the base of a cylinder is 39 square inches and its height is 14 inches. A cone has the same area for its base and the same height. What is the volume of the cone?
The requried volume of the cone is 182 cubic inches.
The area of the base of the cylinder is given by:
[tex]A_{cylinder} = \pi r^2[/tex]
where r is the radius of the cylinder. We know that the area of the base is 39 square inches, so we can write:
[tex]\pi r^2 = 39[/tex]
Solving for r, we get:
r = √(39/π)
The height of the cylinder is given as 14 inches. Therefore, the volume of the cylinder is:
[tex]A_{cylinder} = \pi r^2\\ A_{cylinder}= \pi (39/ \pi )(14)\\ A_{cylinder}= 546 \ \ \ cubic inches.[/tex]
Similarly,
The volume of the cone ([tex]V=1/3 \pi r^2h[/tex]) is 182 cubic inches.
Learn more about the volume of the cone here:
https://brainly.com/question/1984638
#SPJ1
Find the solution of the given initial value problem.y'' − 2y' − 3y = h (t-4),, y(0) = 8, y'(0) = y'(0)=0Solve the given initial-value problem.d2xdt2+ ω2x = F0 sin ωt, x(0) = 0, x '(0) = 0
a)The solution to the given initial value problem is
[tex]y(t) = ((2h/27) + (4/3))e^(^3^t^) + ((2h/27) - (4/3))e^(^-^t^) - (h/3)(t-4) - (2h/9)[/tex]
b)The solution to the given initial value problem is
[tex]x(t) = (F0/(2ω^2))sin ωt - (F0/(2ω^2))cos ωt[/tex]
For the first problem, we can use the method of undetermined coefficients to find a particular solution to the non-homogeneous differential equation.
Let's assume that the solution has the form y_p = A(t-4) + B.
Taking the first and second derivatives, we have y'_p = A and y''_p = 0.
Substituting these expressions into the differential equation, we get:
[tex]0 - 2A - 3(A(t-4) + B) = h(t-4)[/tex]
To simplify, we have:
[tex]-3At + (6A - 3B) = h(t-4)[/tex]
To satisfy this equation for all t, we must have -3A = h and 6A - 3B = 0.
Solving for A and B, we get A = -h/3 and B = -2h/9.
Therefore, the particular solution is
[tex]y_p = (-h/3)(t-4) - (2h/9).[/tex]
To find the general solution to the homogeneous differential equation, we first solve the characteristic equation:
[tex]r^2 - 2r - 3 = 0[/tex]
Factoring, we get (r-3)(r+1) = 0, so r = 3 or r = -1.
Therefore, the general solution to the homogeneous equation is
[tex]y_h = c_1e^(^3^t^) + c_2e^(^-^t^).[/tex]
The general solution to the entire differential equation is the sum of the homogeneous and particular solutions:
[tex]y = y_h + y_p.[/tex]
Plugging in the initial conditions, we have:
[tex]y(0) = 8 = c_1 + c_2 - (2h/9)y'(0) = 0 = 3c_1 - c_2 - (h/3)[/tex]
Solving for c_1 and c_2 in terms of h, we get
c_1 = (2h/27) + (4/3) and c_2 = (2h/27) - (4/3).
Therefore, the solution to the initial value problem is:
[tex]y(t) = ((2h/27) + (4/3))e^(^3^t^) + ((2h/27) - (4/3))e^(^-^t^) - (h/3)(t-4) - (2h/9)[/tex]
For the second problem, we can use the method of undetermined coefficients again.
Let's assume that the solution has the form x_p = A sin ωt.
Taking the second derivative, we have [tex]d^2x_p/dt^2 = -Aω^2 sin ωt.[/tex]
Substituting these expressions into the differential equation, we get:
[tex]-Aω^2 sin ωt + ω^2A sin ωt = F0 sin ωt[/tex]
Simplifying, we get -2Aω^2 sin ωt = F0 sin ωt, so A = -F0/(2ω^2).
The general solution to the homogeneous differential equation is
[tex]x_h = c_1 cos ωt + c_2 sin ωt.[/tex]
Therefore, the general solution to the entire differential equation is
[tex]x = x_h + x_p.[/tex]
Plugging in the initial conditions, we have:
x(0) = 0 = c_1
x'(0) = 0 = c_2ω - (F0/(2ω))
Solving for c_2 in terms of F0 and ω, we get c_2 = F0/(2ω^2).
Therefore, the solution to the initial value problem is:
[tex]x(t) = (F0/(2ω^2))sin ωt - (F0/(2ω^2))cos ωt[/tex]
Learn more about Laplace Transform:https://brainly.com/question/28167584
#SPJ11
let a = {1, 2, 3, 4, , 18} and define a relation r on a as follows: for all x, y ∈ a, x r y ⇔ 4|(x − y).
The relation R defined on set A={1,2,3,...,22} as xRy ⇔ 4|(x-y) is an equivalence relation. The equivalence classes are {1,5,9,13,17,21}, {2,6,10,14,18,22}, {3,7,11,15,19}, and {4,8,12,16,20}.
Since R is an equivalence relation on A, it partitions A into disjoint equivalence classes.
The equivalence class of an element a ∈ A is the set of all elements in A that are related to a under R.
Using set-roster notation, we can write the equivalence classes of R as follows
[1] = {1, 5, 9, 13, 17, 21}
[2] = {2, 6, 10, 14, 18, 22}
[3] = {3, 7, 11, 15, 19}
[4] = {4, 8, 12, 16, 20}
Each equivalence class contains all elements that are congruent modulo 4.
To know more about equivalence relation:
https://brainly.com/question/14307463
#SPJ4
--The given question is incomplete, the complete question is given
" Let A = {1, 2, 3, 4, , 22} And define a relation R on A as follows
For all x, y ∈ A, x R y ⇔ 4|(x − y).
It is a fact that R is an equivalence relation on A. Use set-roster notation to write the equivalence classes of R."--
For a Poisson distribution, the expression e^- 3(1+3+ 3^2/2!+3^3/3!+3^4/4!) equals the cumulative probability of ___ arrivals during an interval for which the average number of arrivals equals__
The expression e^(-3)(1+3+3^2/2!+3^3/3!+3^4/4!) equals the cumulative probability of 4 arrivals during an interval for which the average number of arrivals equals 3.
Here's a step-by-step explanation:
1. Recognize that the given expression represents the cumulative probability for a Poisson distribution.
2. Identify the average number of arrivals (λ) as 3, which is the exponent in the e^(-3) term.
3. Recognize that the terms inside the parentheses correspond to the Poisson probability mass function (PMF) for k=0, 1, 2, 3, and 4 arrivals.
4. Since the expression sums up the probabilities for k=0 to k=4, it represents the cumulative probability of 4 arrivals.
5. In summary, the expression represents the cumulative probability of 4 arrivals during an interval where the average number of arrivals is 3.
the sum of two numbers, x and y is 62. find the number x given that the product xy is maximum.
The number x that maximizes the product xy when x and y have a sum of 62 is:
x = 31.
To find the number x when the sum of two numbers x and y is 62 and the product xy is maximum, we can use the concept of optimization.
Step 1: Write down the given information:
x + y = 62 (the sum of x and y)
Step 2: Express one variable in terms of the other:
y = 62 - x
Step 3: Write the function to be maximized:
P(x) = x * y = x * (62 - x)
Step 4: Find the derivative of the function:
P'(x) = (62 - x) - x
Step 5: Set the derivative to zero and solve for x:
0 = (62 - x) - x
2x = 62
x = 31
So, the number x that maximizes the product xy when x and y have a sum of 62 is x = 31.
To learn more about maximization visit : https://brainly.com/question/13464288
#SPJ11
find x if y=3
3x-4y=8(-2-4)
(WITH SOLUTION)
Answer:
y=4
Step-by-step explanation:
3×−4y=8(−2−4)
Multiply 3 and −4 to get −12.
−12y=8(−2−4)
Subtract 4 from −2 to get −6.
−12y=8(−6)
Multiply 8 and −6 to get −48.
−12y=−48
Divide both sides by −12.
y=
−12
−48
Divide −48 by −12 to get 4.
y=4
Answer:
X= - 12
Step-by-step explanation:
3x-4*3=-16-32
3x-12= - 48
3x= - 48+12
3x= - 36
X= - 36:3
X = - 12
Given the following information, what is the least squares estimate of the y-intercept?
x y 2 50 5 70 4 75 3 80 6 94
a)3.8 b)5 c) 7.8 d) 42.6
2) A least squares regression line
a) can only be determined if a good linear relationship exists between x and y.
b) ensures that the predictions of y outside the range of the values of x are valid.
c) implies a cause-and-effect relationship between x and y.
d) can be used to predict a value of y if the corresponding x value is given.
3) Regression analysis was applied between sales (in $1,000s) and advertising (in $100s) and the following regression function was obtained.
ŷ = 900 + 6x
Based on the above estimated regression line, if advertising is $10,000, find the point estimate for sales (in dollars).
a) $1,500 b) $60,900 c) $907,000 d) $1,500,000
Answer:
Step-by-step explanation:
Using the least squares regression method, we obtain the equation of the regression line: y = 22.4x + 26.2. The y-intercept is the value of y when x = 0, which is 26.2. Therefore, the answer is d) 26.2.
The correct answer is d) can be used to predict a value of y if the corresponding x value is given. A least squares regression line is a statistical method used to find the equation of a line that best fits the data points. It can be used to predict the value of the dependent variable (y) for a given value of the independent variable (x).
The regression function is ŷ = 900 + 6x, where x is the advertising in $100s and ŷ is the sales in $1,000s. To find the point estimate for sales when advertising is $10,000, we substitute x = 100 in the regression function: ŷ = 900 + 6(100) = 1,500. Therefore, the answer is a) $1,500.
The least squares estimate of the y-intercept is 42.6.
What is a y-intercept?An intercept is a point on the y-axis, through which the slope of the line passes. It is the y-coordinate of a point where a straight line or a curve intersects the y-axis. This is represented when we write the equation for a line, y = mx+c, where m is slope and c is the y-intercept.
Given that,
x y
2 50
5 70
4 75
3 80
6 94
Calculate the means of x and y values:
x_mean = (2 + 5 + 4 + 3 + 6) / 5 = 20 / 5 = 4
y_mean = (50 + 70 + 75 + 80 + 94) / 5 = 369 / 5 = 73.8
Calculate the differences from the means for x and y:
x_diff = [2-4, 5-4, 4-4, 3-4, 6-4] = [-2, 1, 0, -1, 2]
y_diff = [50-73.8, 70-73.8, 75-73.8, 80-73.8, 94-73.8] = [-23.8, -3.8, 1.2, 6.2, 20.2]
Calculate the product of the x and y differences and the square of x differences:
xy_diff = [-2×(-23.8), 1×(-3.8), 0×1.2, -1×6.2, 2×20.2] = [47.6, -3.8, 0, -6.2, 40.4]
x_squared_diff = [-2², 1², 0², -1², 2²] = [4, 1, 0, 1, 4]
4. Sum up the product of the x and y differences and the square of x differences:
sum_xy_diff = 47.6 - 3.8 + 0 - 6.2 + 40.4 = 78
sum_x_squared_diff = 4 + 1 + 0 + 1 + 4 = 10
Calculate the slope (m):
m = 78 / 10 = 7.8
Use the slope (m) to find the least squares estimate of y-intercept (b) using the equation
b = 73.8 - 7.8 × 4 = 73.8 - 31.2
= 42.6
Therefore, the least squares estimate of the y-intercept is 42.6.
To learn more about the y-intercept visit:
brainly.com/question/14180189.
#SPJ2
The process of dividing a data set into a training, a validation, and an optimal test data set is called Multiple Choice optional testing oversampling overfitting O data partitioning
The process of dividing a data set into a training, a validation, and an optimal test data set is called data partitioning.
Data partitioning is the process of dividing a dataset into separate subsets that are used for different purposes, such as training a model, validating its performance, and testing it on new data.
The most common way to partition a dataset is into three subsets: a training set, a validation set, and a test set. The training set is used to train a model, the validation set is used to tune the model's hyperparameters and assess its performance during training, and the test set is used to evaluate the final performance of the model on new, unseen data.
Data partitioning helps to prevent overfitting by providing a way to evaluate a model's performance on data that it has not seen during training.
Lear more about data partitioning,
https://brainly.com/question/30825005
#SPj11
a) Write 2x² + 16x + 6 in the form a (x + b)² + c, where a, b and c are numbers. What are the values of a, b and c?
b) Hence, write down the coordinates of the turning point of the curve y = 2x² + 16x + 6.
Find Sin B. Please help me on this, i am so stuck :(
Answer:
13/85
Step-by-step explanation:
The sin of an angle is the opposite side over the hypotenuse.
sin B = opp/ hyp
sin B = 13/85
Answer:
sin B = 0.1529
Step-by-step explanation:
To find the Sin B angle we have to use the below formula.
[tex]\sf Sin\:B = \frac{Opposite}{Hypotenuse}[/tex]
Let us solve this now.
[tex]\sf Sin\:B = \frac{Opposite}{Hypotenuse} \\\\\sf Sin\:B = \frac{13}{85} \\\\Sin \:B =0.1529[/tex]
Additionally, To Remove sin, look at the inverse of the sin value and find the exact value of B
[tex]\sf B = sin^-^10.1529\\B=8.79\\\\[/tex]
helpppp please find the area with explanation, answer and find the missing sides thank you!!
At an international conference of 100 people, 75 speak English, 60 speak Spanish and 45 speak Swahili (and everyone present speaks at least one of these languages). what is the maximum number of people who speak only english? in this case what can be said about the number who speak only spanish and the number who speak only swahili?
Regarding the number of people who speak only Spanish or only Swahili, we can't say anything for certain without additional information. It's possible that some people speak only one of those languages, while others speak both or all three.
According to the given information,
we can use the principle of inclusion-exclusion to find the maximum number of people who speak only English.
In order to do this,
Adding the number of people who speak only English to the number of people who speak English and at least one other language.
This gives us a total of 75 people who speak English.
Now subtract the number of people who speak English and either Spanish or Swahili (or both) to avoid counting them twice.
In order to do this,
we have to find the number of people who speak both English and Spanish, both English and Swahili, and all three languages.
From the information given,
we know that there are 60 people who speak Spanish, 45 people who speak Swahili, and 100 people total.
Therefore,
There must be 100 - 60 = 40 people who do not speak Spanish, and
100 - 45 = 55 people who do not speak Swahili.
We also know that 75 people speak English, and since everyone speaks at least one language, we can subtract the total number of people who speak Spanish or Swahili (or both) from 100 to find the number of people who speak only English. So we get,
⇒ 100 - (40 + 55 + 75) = 100 - 170
= -70
Since we can't have a negative number of people,
we know that there must be some overlap between the groups.
So, there must be some people who speak all three languages.
To find the maximum number of people who speak only English,
we assume that everyone who speaks two languages (English and either Spanish or Swahili) also speaks the third language.
So we get,
⇒ 75 - (60 - x) - (45 - x) - x = 75 - 60 + x - 45 + x - x
= -30 + x
where x is the number of people who speak all three languages.
To maximize the number of people who speak only English,
we want to minimize x.
Since everyone who speaks two languages also speaks the third language,
We know that the total number of people who speak two or three languages is,
⇒ 60 + 45 - x = 105 - x.
Since there are 100 people in total, this means that at least 5 people speak only one language.
Therefore,
The maximum number of people who speak only English is 70 - x,
where x is the number of people who speak all three languages, subject to the constraint that x is at least 5.
Hence,
We are unable to determine with certainty the number of persons who speak just Swahili or only Spanish without more details. Some people might only speak one of those languages, while others might speak two or all three.
Learn more about the subtraction visit:
https://brainly.com/question/17301989
#SPJ12
0, 3, 8, 15...
Generalize the pattern by finding the nth term.
The nth term of the pattern is (n²-1)
The nth term of a pattern:To find the nth term identify the patterns in a given sequence and use algebraic expressions to generalize the pattern and find the nth term.
By observing the given series we say that each number is one less than perfect Like 8 is one less than 9, 15 is one less than 16, etc. Use this condition to solve the problem.
Here we have
0, 3, 8, 15...
To find the nth terms identify the patterns in a given sequence
Here each term can be written as follows
1st term => 0 = (1)² - 1 = 0
2nd term => 3 = (2)² - 1 = 3
3rd term => 8 = (3)² - 1 = 8
4th term => 15 = (4)² - 1 = 15
Similarly
nth term = (n)² - 1 = (n²-1)
Therefore,
The nth term of the pattern is (n²-1)
Learn more about Patterns at
https://brainly.com/question/28814690
#SPJ1
graph the following system of inequalities
4x + 2y ≤ 16
x + y ≥ 4
The graph of the system of inequalities is on the image at the end.
How to graph the system of inequalities?Here we need to graph the two linear inequalities:
4x + 2y ≤ 16
x + y ≥ 4
On the same coordinate axis.
To do so, we can write both of these as lines:
y ≥ 4 - x
y ≤ (16 - 4x)/2
y ≤ 8 - 2x
Then the system is:
y ≥ 4 - x
y ≤ 8 - 2x
Now just graph the two lines with solid lines (because of the symbols used) and shadew the region above the first line and the region below the second line.
Learn more about systems of inequalities:
https://brainly.com/question/9774970
#SPJ1
State whether the sequence converges and, if it does, find the limit.
1. (n+4)/n
2. (n+8)/(n^2)
3. tan((n(pi))/(4n+3))
4. ln(3n/(n+1))
5. n^2/(sqrt(8n^4+1))
6. (1+(1/n))^(5n)
1. The sequence (n+4)/n converges to 1 as n approaches infinity.
2. The sequence (n+8)/(n^2) converges to 0 as n approaches infinity.
3. The sequence tan((n(pi))/(4n+3)) oscillates and does not converge.
4. The sequence ln(3n/(n+1)) converges to ln(3) as n approaches infinity.
5. The sequence n^2/(sqrt(8n^4+1)) converges to 1/(sqrt(8)) = 1/4 as n approaches infinity.
6. The sequence (1+(1/n))^(5n) converges to e^5 as n approaches infinity.
1. The sequence converges. As n approaches infinity, (n+4)/n approaches 1.
2. The sequence converges. As n approaches infinity, (n+8)/(n^2) approaches 0.
3. The sequence converges. As n approaches infinity, tan((n*pi)/(4n+3)) approaches 0 since tan(n*pi) is 0 for all integer values of n.
4. The sequence converges. As n approaches infinity, ln(3n/(n+1)) approaches ln(3) as the leading terms dominate.
5. The sequence converges. As n approaches infinity, n^2/(sqrt(8n^4+1)) approaches 0 since the denominator grows faster than the numerator.
6. The sequence converges. As n approaches infinity, (1+(1/n))^(5n) approaches e^5 using the limit definition of e.
To learn more about sequence converges, click here:
brainly.com/question/21961097
#SPJ11
Which statement is true?
Responses
A 493,235 > 482,634493,235 > 482,634
B 837,295 > 873,393837,295 > 873,393
C 139,048 > 139,084139,048 > 139,084
D 371,538 > 371,725371,538 > 371,725
Answer:
A
Step-by-step explanation:
find the transition matrix from b to b'. b = {(1, 0), (0, 1)}, b' = {(2, 4), (1, 3)}
The transition matrix from b to b' is P = [2 1, 4 3]
To find the transition matrix from b to b', we need to find the matrix P such that P[b] = b'.
First, we need to express the elements of b' in terms of the basis b. To do this, we solve the equation x[1](1,0) + x[2](0,1) = (2,4) for x[1] and x[2]. This gives us x[1] = 2 and x[2] = 4. Similarly, we solve the equation y[1](1,0) + y[2](0,1) = (1,3) for y[1] and y[2]. This gives us y[1] = 1 and y[2] = 3.
Now, we can construct the matrix P using the coefficients we just found. The columns of P are the coordinate vectors of the elements of b' expressed in terms of the basis b.
P = [x[1] y[1], x[2] y[2]]
= [2 1, 4 3]
Therefore, the transition matrix from b to b' is P = [2 1, 4 3]
To learn more about matrix here:
brainly.com/question/28180105#
#SPJ11
Find the area of a regular pentagon with side length 9 m. Give the answer to the nearest tenth.
A. 27.9 m²
B. 111.5 m²
C. 278.7 m²
D. 139.4 m²
The Area of a regular pentagon will be "139.4 cm²". To understand the calculation, check below.
Regular PentagonAccording to the question,
Side length (a) = 9 cm
We know the formula,
[tex]\bold{Area} \ \text{of Pentagon} =\dfrac{1}{4} \sqrt{5(5+25)\text{a}^2}[/tex]
By substituting the values, we get
[tex]=\dfrac{1}{4} \sqrt{5(5+25)(9)^2}[/tex]
[tex]=\dfrac{1}{4} \sqrt{5(30)81}[/tex]
[tex]=\dfrac{1}{4} \sqrt{150\times81}[/tex]
[tex]= 139.36 \ \text{or}[/tex],
[tex]= 139.4 \ \text{m}^2[/tex]
Thus the above answer is correct.
Find out more information about regular pentagon here:
brainly.com/question/858867
PLEASE HELP ASAP! 100 points offered!
The measures of the arc angles KL and MJ are 80° and 20° respectively derived using the Angles of Intersecting Chords Theorem
What is the Angles of Intersecting Chords Theorem
The Angles of Intersecting Chords Theorem states that the angle formed by the intersection of the chords is equal to half the sum of the intercepted arcs, and conversely, that the measure of an intercepted arc is half the sum of the two angles that intercept it.
50 = (KL + MJ)/2
100 = KL + MJ...(1)
30 = (MJ - KL)/2 {secant secant angle}
60 = MJ - KL...(2)
adding equations (1) and (2) we have;
160 = 2KL
divide through by 2
KL = 80°
Putting 80° for KL in equation (1), we have;
MJ = 100 - 80
MJ = 20°
Therefore, measures of the arc angles KL and MJ are 80° and 20° respectively by application of the Angles of Intersecting Chords Theorem
Read more about chords here:https://brainly.com/question/13950364
#SPJ1
find the exact value of the trignometric expression given sin u=-8/17 and cosv=-3/5. (both u and v are in quadrant 11)
tan(u+v)
The value of the trigonometric expression tan(u + v) for the given values sin u=-8/17 and cosv=-3/5 as both u and v are in quadrant II is equal to 84/77.
In the trigonometric expression ,
sin u=-8/17
Both u and v are in quadrant II.
Draw a right angle triangle ,
opposite side = -8
Hypotenuse = 17
using Pythagoras theorem ,
Adjacent side
= √(Hypotenuse)² - ( opposite side)²
=√17² - (-8)²
= -15
cos u = -15 / 17
Now,
cos v=-3/5
Both u and v are in quadrant II.
Draw a right angle triangle ,
Adjacent side = -3
Hypotenuse = 5
using Pythagoras theorem ,
Opposite side
= √(Hypotenuse)² - ( Adjacent side)²
=√5² - (-3)²
= -4
sin v = -4/5
sin(u + v ) = sinu cosv + cosu sinv
Substitute the value,
⇒sin(u + v ) = (-8/17) (-3/5) + (-15/17) (-4/5)
⇒sin(u + v ) = ( 24 + 60 )/ 85
⇒sin(u + v ) =84/85
cos ( u + v) = cosu cosv−sinu sinv
⇒cos ( u + v) = (-15/17)(-3/5) - (-8/17)(-4/5)
⇒cos ( u + v) = ( 45 + 32 ) / 85
⇒cos ( u + v) = 77/85
This implies,
tan (u + v )
= sin ( u + v) / cos( u + v)
= (84/85)/(77/85)
= 84/77
Therefore, the value of the trigonometric expression tan (u + v ) = 84/77.
Learn more about trigonometric expression here
brainly.com/question/20593351
#SPJ4
is the sequence {an} a solution of the recurrence relation an = 8an−1 − 16an−2 if a) an = 0? b) an = 1? c) an = 2n? d) an = 4n? e) an = n4n? f ) an = 2 ⋅ 4n 3n4n? g) an = (−4)n? h) an = n24n?
The solutions to the recurrence relation an = 8an−1 − 16an−2 are:
a) {an = 0}
b) {an = 1}
c) {an = 2ⁿ}
d) {an = 4ⁿ}
g) {an = (-4)ⁿ}
What is recurrence relation?A recurrence relation in mathematics is an equation that states that the last term in a series of integers equals some combination of the terms that came before it.
To determine if a sequence {an} is a solution of the recurrence relation an = 8an−1 − 16an−2, we need to substitute the sequence into the recurrence relation and see if it holds for all n.
a) If an = 0, then:
an = 8an−1 − 16an−2
0 = 8(0) − 16(0)
0 = 0
This holds, so {an = 0} is a solution.
b) If an = 1, then:
an = 8an−1 − 16an−2
1 = 8(1) − 16(0)
1 = 8
This does not hold, so {an = 1} is not a solution.
c) If an = 2n, then:
an = 8an−1 − 16an−2
2n = 8(2n−1) − 16(2n−2)
2n = 8(2n−1) − 16(2n−1)
2n = −8(2n−1)
2n = −2 × 2(2n−1)
This does not hold for all n, so {an = 2n} is not a solution.
d) If an = 4n, then:
an = 8an−1 − 16an−2
4n = 8(4n−1) − 16(4n−2)
4n = 8(4n−1) − 4 × 16(4n−1)
4n = −60 × 16(4n−1)
This does not hold for all n, so {an = 4n} is not a solution.
e) If an = n4n, then:
an = 8an−1 − 16an−2
n4n = 8(n−1)4(n−1) − 16(n−2)4(n−2)
n4n = 8(n−1)4(n−1) − 4 × 16(n−1)4(n−1)
n4n = −60 × 16(n−1)4(n−1)
This does not hold for all n, so {an = n4n} is not a solution.
f) If an = 2 ⋅ 4n/(3n4n), then:
an = 8an−1 − 16an−2
2 ⋅ 4n/(3n4n) = 8 ⋅ 2 ⋅ 4n−1/(3(n−1)4n−2) − 16 ⋅ 2 ⋅ 4n−2/(3(n−2)4n−4)
2 ⋅ 4n/(3n4n) = 16 ⋅ 4n−1/(3(n−1)4n−2) − 16 ⋅ 4n−2/(3(n−2)4n−4)
2 ⋅ 4n/(3n4n) = (16/3) ⋅ (n−1) ⋅ 4n−1/n4n−2 − (16/3) ⋅ (n−2) ⋅ 4n−2/(n−2)4n−4
2 ⋅ 4n/(3n4n) = (16/3) ⋅ (n−1) ⋅ 4n−1/n4n−2 − (16/3) ⋅ (n−2) ⋅ 4n−2/n4n−2
2 ⋅ 4n/(3n4n) = (16/3) ⋅ (n−1) ⋅ 4n−1/n4n−2 − (16/3) ⋅ (n−2) ⋅ 4n−2/n4n−2
2 ⋅ 4n/(3n4n) = (16/3) ⋅ (n−1) ⋅ 4n−1/n4n−2 − (16/3) ⋅ (n−2) ⋅ 4n−2/n4n−2
2 ⋅ 4n/(3n4n) = (16/3) ⋅ (n−1) ⋅ 4n−1/n4n−2 − (16/3) ⋅ (n−2) ⋅ 4n−2/n4n−2
2 ⋅ 4n/(3n4n) = (16/3) ⋅ (n−1)/n − (16/3) ⋅ (n−2)/n
2 ⋅ 4n/(3n4n) = (16/3) ⋅ (1 − 1/n) − (16/3) ⋅ (1 − 2/n)
2 ⋅ 4n/(3n4n) = (16/3n) ⋅ (2 − n)
This does not hold for all n, so {an = 2 ⋅ 4n/(3n4n)} is not a solution.
g) If an = (−4)n, then:
an = 8an−1 − 16an−2
(−4)n = 8(−4)n−1 − 16(−4)n−2
(−4)n = −8 ⋅ 4n−1 + 16 ⋅ 16n−2
(−4)n = −8 ⋅ (−4)n + 16 ⋅ (−4)n
This does not hold for all n, so {an = (−4)n} is not a solution.
h) If an = n2^(4n), then:
an = 8an−1 − 16an−2
n2^(4n) = 8(n-1)2^(4(n-1)) - 16(n-2)2^(4(n-2))
n2^(4n) = 8n2^(4n-4) - 16(n-2)2^(4n-8)
n2^(4n) = 8n2^(4n-4) - 16n2^(4n-8) + 512(n-2)
n2^(4n) - 8n2^(4n-4) + 16n2^(4n-8) - 512(n-2) = 0
n2^(4n-8)(2^16n - 8(2^12)n + 16(2^8)) - 512(n-2) = 0
This does not hold for all n, so {an = n2^(4n)} is not a solution.
Therefore, the solutions to the recurrence relation an = 8an−1 − 16an−2 are:
a) {an = 0}
b) {an = 1}
c) {an = 2ⁿ}
d) {an = 4ⁿ}
g) {an = (-4)ⁿ}
Learn more about recurrence relation on:
https://brainly.com/question/27753635
#SPJ1
Use Green's Theorem to evaluate the line integral along the given positively oriented curve. C 3 sin y dx + 3x cos y dy C is the ellipse x^(2) + xy + y^(2) = 36
The line integral is zero: ∫C F · dr = 0
To apply Green's Theorem, we need to find the curl of the vector field F [tex]= (3 sin y, 3x cos y)[/tex].
∂F2/∂x = 3 cos y
∂F1/∂y = 3 cos y
So, curl F = (∂F2/∂x - ∂F1/∂y) = 0
Since the curl of F is zero, we can apply Green's Theorem to evaluate the line integral along the given curve C, which is the ellipse [tex]x^2 + xy + y^2 = 36[/tex], oriented in the counterclockwise direction.
∫C F · dr = ∬R (∂F2/∂x - ∂F1/∂y) dA
where R is the region enclosed by C.
Since the curl of F is zero, the line integral is equal to the double integral of the curl of F over the region R, which is zero. Therefore, the line integral is zero:
∫C F · dr = 0
To learn more about line integral visit:
https://brainly.com/question/31013115
#SPJ11
A Ferris wheel is 28 meters in diameter and boarded in the six o'clock position from a platform that is 4 meters above the ground. The wheel completes one full revolution every 6 minutes. At the initial time t=0 you are in the twelve o'clock position.
The height of the rider at any time t after the initial time t=0, in meters above the ground is h = 18 - 14*sin((π/3)*t)
How to find the height of the ground?The radius of the Ferris wheel is half the diameter, so it is 14 meters.When the Ferris wheel is at the six o'clock position, the bottom of the wheel is at a height of 4 meters above the ground, so the highest point of the wheel is 4 + 14 = 18 meters above the ground.The circumference of the Ferris wheel is π times the diameter, so it is 28π meters.The Ferris wheel completes one full revolution every 6 minutes, which means its angular velocity is 2π/6 = π/3 radians per minute.Now, let's consider the position of the rider at some time t after the initial time t=0.
We can find the angle that the rider has traveled around the wheel by multiplying the angular velocity by the time elapsed:
θ = (π/3) * t
To find the vertical position of the rider at this angle, we can use the sine function, since the height of the rider on the Ferris wheel varies sinusoidally as the wheel rotates:
h = 18 - 14*sin(θ)
Plugging in the expression for θ, we get:
h = 18 - 14*sin((π/3)*t)
This formula gives the height of the rider at any time t after the initial time t=0, in meters above the ground.
Learn more about motion of a rider
brainly.com/question/29810266
#SPJ11
solve -2x - 6 > 3x + 14
Answer:
x < -4
Step-by-step explanation:
-2x - 6 > 3x + 14 Add 2x to both sides
-2x + 2x - 6 > 3x + 2x + 14
-6 > 5x + 14 Subtract 14 from both sides
-6 - 14 > 5x + 14 - 14
-20 > 5x Divide both sides by 5
[tex]\frac{-20}{5}[/tex] > [tex]\frac{5}{5}[/tex] x
-4 > x or x < -4
Helping in the name of Jesus.
which class has the lowest median grade ?
which class has the highest median grade ?
which class has the lowest interquartile range ?
Which class has the lowest median grade? Class 1
Which class has the highest median grade? Class 2
Which class has the lowest interquartile range? Class 1
For each of these sequences find a recurrence relation satisfied by this sequence. (The answers are not unique because there are infinitely many different recurrence relations satisfied by any sequence.)
a) an = 3
b) an = 2n
c) an=2n+3
d) an = 5n
e) an = n2
f) an=n2+n
g) an = n + (-1)n
h) an = n!
a) For an = 3, recurrence relation: a_n = a_(n-1); b) For an = 2n, recurrence relation: a_n = a_(n-1) + 2; c) For an = 2n + 3, recurrence relation: a_n = a_(n-1) + 2; d) For an = 5n, recurrence relation: a_n = a_(n-1) + 5; e) an = n^2, recurrence relation: a_n = a_(n-1) + 2n - 1; f) an = n^2 + n, recurrence relation: a_n = a_(n-1) + 2n; g) an = n + (-1)^n, recurrence relation: a_n = a_(n-1) + 2*(-1)^n; h) an = n!, recurrence relation: a_n = n * a_(n-1).
Explanation:
To find recurrence relations for these sequences, please note that the answers may not be unique, but I will provide one possible recurrence relation for each sequence:
a) a_n = 3
a_(n-1) = 3
Recurrence relation: a_n = a_(n-1)
b) a_n = 2n
a_(n-1) = 2(n-1)
Thus, a_n - a_(n-1) = 2
Recurrence relation: a_n = a_(n-1) + 2
c) a_n = 2n + 3
a_(n-1)= 2(n-1) + 3
Thus, a_n - a_(n-1) = 2
a_n = a_(n-1) + 2
Recurrence relation: a_n = a_(n-1) + 2
d) a_n = 5n
a_(n-1) = 5(n-1)
Thus, a_n - a_(n-1) = 5
Recurrence relation: a_n = a_(n-1) + 5
e) a_n = n^2
a_(n-1) = (n-1)^2
Thus, a_n - a_(n-1) = 2n - 1
Recurrence relation: a_n = a_(n-1) + 2n - 1
f) a_n = n^2 + n
a_(n-1) = (n-1)^2 +(n-1)
Thus, a_n - a_(n-1) = 2n
Recurrence relation: a_n = a_(n-1) + 2n
g) a_n = n + (-1)^n
a_(n-1) = (n-1) + (-1)^(n-1)
Thus, a_n - a_(n-1) = 2*(-1)^n
Recurrence relation: a_n = a_(n-1) + 2*(-1)^n
h) a_n = n!
a_(n-1) = (n-1)!
Thus, a_n/a_(n-1)= n
Recurrence relation: a_n = n * a_(n-1)
To know more about Recurrence relation click here:
https://brainly.com/question/31384990
#SPJ11