Three people each rented a car with insurance and one more prson rented a car with a car wash. What is the expression for the total cost

Answer:

XY = 9

Step-by-step explanation:

Similar polygons have corresponding sides with proportional lengths.

WX/AB = XY/BC

12/8 = XY/6

8XY = 12 * 6

8XY = 72

XY = 9

The set in problem 8 was not a subspace because one of the subspace axioms requires that the zero vector, which is the additive identity element, is included in the set. In the given problem, the zero vector was not part of the set, so it failed to satisfy this axiom

a. The set F is a subset of the vector space of continuous functions on some interval, which we have studied this semester.

b. To prove whether F is a subspace of the vector space of continuous functions, we need to check if F satisfies the three subspace axioms: closure under addition, closure under scalar multiplication, and the zero vector property.

Let f and g be two functions in F, and let c be a scalar. To show closure under addition, we need to prove that f + g is also in F. Since both f and g have the property that f'(2) = 0 and g'(2) = 0, their sum (f + g) will also have the property that (f + g)'(2) = f'(2) + g'(2) = 0 + 0 = 0. Therefore, f + g is in F.

To show closure under scalar multiplication, we need to prove that cf is also in F. Again, since f has the property that f'(2) = 0, multiplying f by any scalar c will not change the derivative at 2. Therefore, (cf)'(2) = c × f'(2) = c × 0 = 0, and cf is in F.

Finally, the zero vector property states that the zero function, denoted as 0, must be in F. The zero function has the property that its derivative is always zero, including at 2. Therefore, 0'(2) = 0, and the zero function is in F.

Since F satisfies all three subspace axioms, we can conclude that F is a subspace of the vector space of continuous functions.

c. We can get away with not checking the other eight axioms (associativity, commutativity, distributivity, etc.) because F is a subset of a known vector space. By being a subset of a vector space, F inherits those axioms from the larger vector space. The other eight axioms are properties of vector spaces that hold true for all vectors in the larger vector space, including the vectors in F. Therefore, if F satisfies the subspace axioms, it automatically satisfies the other eight axioms by virtue of being a subset of a vector space.

d. It was not okay to only check the two subspace axioms on problem 8 from exam 2 because the set in that problem did not satisfy the zero vector property. One of the subspace axioms requires that the zero vector, which is the additive identity element, is included in the set. In the given problem, the zero vector was not part of the set, so it failed to satisfy this axiom. As a result, the set in problem 8 was not a subspace.

To know more about subspace axioms click here :

https://brainly.com/question/26727539

#SPJ4

Answer:

[tex]15c - 1[/tex]

Step-by-step explanation:

[tex]3(5c + 3) - 10[/tex]

Apply the distributive property.

[tex]3(5c) + 3 \times 3 - 10[/tex]

Multiply 5 by 3.

[tex]15c + 3 \times 3 - 10[/tex]

Multiply 3 by 3.

[tex]15c + 9 - 10[/tex]

Subtract 10 from 9.

[tex]15c - 1[/tex]

To test the hypothesis of mean differences in artificially sweetened drink consumption among BMI groups, assuming a normal distribution, the researcher might use a one-way ANOVA.

The one-way ANOVA compares the means of three or more independent groups and determines if there are statistically significant differences among them. In this case, the BMI groups (normal weight, overweight, and obese) represent the independent groups, and the number of artificially sweetened drinks consumed is the dependent variable. By conducting a one-way ANOVA, the researcher can assess if there are significant differences in mean consumption among the BMI groups and draw conclusions regarding their hypothesis.

For more information mean weights on visit: brainly.com/question/32618074

#SPJ11

Value of y[1] = 0.5 and y[2] = 0.5.

The given discrete-time system is:

y[k-1] + 2y[k] = [k]with y(0) = 0.

Substituting k = 0 in the above equation:

y[-1] + 2y[0] = [0] y[-1] = 0

Substituting k = 1 in the given equation:

y[0] + 2y[1] = [1]

Substituting the value of y[0] from the above equation in this equation, we get:

2y[1] = [1] - y[0]

Substituting the value of y[0] = 0 in the above equation:

2y[1] = [1]y[1] = [1]/2 = 0.5

Substituting k = 2 in the given equation:

y[1] + 2y[2] = [2]

Substituting the value of y[1] from the above equation in this equation, we get:

2y[2] = [2] - y[1]

Substituting the value of y[1] = 0.5 in the above equation:

2y[2] = [2] - 0.5y[2] = [2]/2 - 0.5 = 0.5

Therefore, y[1] = 0.5 and y[2] = 0.5.

To learn more about discrete-time

https://brainly.com/question/14863625

#SPJ11

Answer:

Domain is all real numbers. Range is [36- negative infinity]

Answer:

A

Step-by-step explanation:

Think about the square root of 64, which is 8. It will only be slightly higher than 8, which will not even be .5, so 8 is the closest number.

Answer:

utility cost, direct labor costs, cost of raw materials used in production

Answer:

x = 1

Step-by-step explanation:

Answer:

1/3, 1/2, 3/4

Step-by-step explanation:

The magnitude of the average induced electric field, e, in a loop can be expressed in terms of δφ, r, and δt.

When a magnetic field changes within a loop, it induces an electric field according to Faraday's law of electromagnetic induction. The magnitude of the average induced electric field, e, can be determined by the change in magnetic flux δφ, the radius of the loop r, and the change in time δt. The magnetic flux is a measure of the total magnetic field passing through the loop and is given by the product of the magnetic field strength and the area of the loop. As the magnetic field changes, the magnetic flux through the loop changes, leading to an induced electric field. The magnitude of this induced electric field is directly proportional to the rate of change of the magnetic flux, which is δφ/δt. Additionally, the magnitude of the induced electric field is inversely proportional to the radius of the loop, meaning a smaller radius will result in a stronger induced electric field. Therefore, the magnitude of the average induced electric field, e, can be expressed as e = (δφ/δt) / r.

Learn more about magnitude here:

https://brainly.com/question/14452091

#SPJ11

Answer:

Given that average mass of an ant grams.

Given that average mass of a giraffe  Kilograms.

Now we have to find about how many times more mass does a giraffe have than an ant. Before carring out any comparision, we must make both units equal.

Like convert kilogram into gram or gram into kilogram.

I'm going to convert kilogram into gram using formula

1 Kg = 1000 g

So the average mass of a giraffe  grams.

Now we just need to divide mass of giraffe by mass of ant to find the answer.

=666666666.667

Hence final answer is  which is approx 666666666.667.

Hope this Helps!

Answer:

9 [tex]\frac{5}{6}[/tex]

Step-by-step explanation:

Answer:

9

Step-by-step explanation:

There are 9 x's above 1 letter mailed.

The relation C is defined on the set of real numbers (R) as xCy if [tex]x^2[/tex] + [tex]y^2[/tex] = 1 is not reflexive, not symmetric, and not transitive.

To determine if the relation C is reflexive, we need to check if every element x in R is related to itself. However, for any real number x, [tex]x^2[/tex] + [tex]x^2[/tex] = 2[tex]x^2[/tex] ≠ 1. Therefore, C is not reflexive.

For symmetry, we need to check if whenever xCy, then yCx. However, if we take x = 0 and y = 1, we have [tex]x^2[/tex] + [tex]y^2[/tex] = [tex]0^2[/tex]+ [tex]1^2[/tex] = 1, which satisfies the condition for C. But for yCx, we have [tex]y^2[/tex] + [tex]x^2[/tex] = [tex]1^2[/tex] + [tex]0^2[/tex] = 1, which also satisfies the condition. Therefore, C is symmetric.

To test for transitivity, we need to check if whenever xCy and yCz, then xCz. However, if we consider x = 0, y = 1, and z = -1, we have [tex]x^2[/tex] +[tex]y^2[/tex] = [tex]0^2[/tex]+ [tex]1^2[/tex] = 1 and [tex]y^2[/tex] + [tex]z^2[/tex] =[tex]1^2[/tex] + [tex](-1)^2[/tex] = 2. Since 1 + 2 ≠ 1, the condition for transitivity is not satisfied. Thus, C is not transitive.

In conclusion, the relation C is not reflexive, symmetric, or transitive.

Learn more about real numbers here:

https://brainly.com/question/31715634

#SPJ11

Answer:

radius of the base of cylinder = 4 in

Step-by-step explanation:

Volume of cylinder = pi x r² × h

502.4 = 3.14 x r² x 10

502.4 = 31.4 x r²

r² = 502.4/31.4

r² = 16

r = 4 in

Answer:

24x-36y+48

hope this helps :)

24x - 36y + 48 is equivalent to 12(2x-3y+4)

Answer:

I dot know good luck

Step-by-step explanation:

Answer:

x = 6

hope this is the answer you are looking for

Step-by-step explanation:

Answer:

X=6

Step-by-step explanation:

Firstly subtract 2x from both sides = x+2=8

Then subtract 2 from both sides and you'll get x=6.

Answer:

First answer choice

Step-by-step explanation:

Answer:

The answer would be A

Step-by-step explanation:

Using the Ratio Test the series ∑(n³ / [tex]4^n[/tex]) converges. Option A is the correct answer.

To determine the convergence or divergence of the series ∑(n³ / [tex]4^n[/tex]), we can apply the Ratio Test.

The Ratio Test states that if the limit of the absolute value of the ratio of consecutive terms in a series is less than 1, then the series converges. If the limit is greater than 1 or it does not exist, the series diverges.

Let's apply the Ratio Test to the given series:

lim n → ∞ |([tex]a_n[/tex] + 1) / [tex]a_n[/tex]| = lim n → ∞ |((n + 1)³ / [tex]4^{(n + 1)[/tex]) / (n³ / [tex]4^n[/tex])|

We simplify the expression by multiplying by the reciprocal:

lim n → ∞ |((n + 1)³ / [tex]4^{(n + 1)[/tex]) × ([tex]4^n[/tex] / n³)|

Next, we simplify the expression inside the absolute value:

lim n → ∞ |((n + 1)³ × [tex]4^n[/tex]) / ([tex]4^{(n + 1)[/tex] × n³)|

Now, we can cancel out the common factors:

lim n → ∞ |(n + 1)³ / (4 × n³)|

Simplifying further:

lim n → ∞ |(n + 1) / (4n)|³

Taking the limit as n approaches infinity:

lim n → ∞ |(1 + 1/n) / 4|³

Since the limit of the absolute value of the ratio is less than 1 (as n approaches infinity), the series converges.

Therefore, the answer is:

A. Converges

Learn more about Ratio Tests at

https://brainly.com/question/20876952

#SPJ4

The question is -

Use the Ratio Test to determine the convergence or divergence of the series. If the Ratio Test is inconclusive, determine the convergence or divergence of the series using other methods.

∑ n = 1 to ∞ (n³ / 4^n)

lim n → ∞ |(a_n + 1) / a_n| = _______

A. Converges

B. Diverges

To find the division of z1 by z2 in polar form, where the angles are given in degrees, we have z1 = 15 cis (83°) and z2 = 6 cis (114°). The polar form of the division of z1 by z2 is 2.5 cis (329°).

To divide complex numbers in polar form, we can divide their magnitudes and subtract their angles. Let's start by dividing the magnitudes:

|z1/z2| = |z1|/|z2| = 15/6 = 2.5

Next, we subtract the angles:

θ = θ1 - θ2 = 83° - 114° = -31°

Since the angle is negative, we add 360° to it to get a positive angle in the standard range:

θ = -31° + 360° = 329°

Therefore, the division of z1 by z2 in polar form is given by:

z1/z2 = 2.5 cis (329°)

So, the polar form of the division of z1 by z2 is 2.5 cis (329°).

Learn more about angle here: https://brainly.com/question/14954407

#SPJ11

Answer:

I believe the simplified form of this ratio is 1:3

*The common factor to both numbers is 27.

27÷27=1 and 81÷27=3

So, that's where the 1:3 came from

A linear equation is an equation in which the highest power of an unknown quantity is 1. Among the given options, the equation y = 6x + 8 is linear.

Hence, the correct option is a. y = 6x + 8.

An equation is linear if and only if it can be written in the form y = mx + c, where m and c are real numbers. In the given options, the equation y = 6x + 8 can be written in the form y = mx + c where m = 6 and c = 8, so it is linear. On the other hand, the equation y – x = 8x2 can be rearranged to give y = 8x2 + x, so the highest power of x is 2. Hence, this equation is not linear.Similarly, the equation 4y = 8 can be rearranged to give y = 2, which is a constant, and so it is also not linear.Finally, the equation y7 = 3x is not linear because the exponent 7 on y is greater than 1 and makes the equation non-linear. Therefore, the correct answer is option a. y = 6x + 8.

To know more about linear equation click here.

https://brainly.com/question/27664510

(a) The exact value of sinh(log(6) - log(5)) is 11/60.

To calculate sinh(log(6) - log(5)), we can use the identity: sinh(x) = ([tex]a^n[/tex] - [tex]e^-x[/tex])/2

So, substituting x = log(6) - log(5), we get:

sinh(log(6) - log(5)) = ([tex]e^(log(6)[/tex] - log(5)) - [tex]e^-(log(6)[/tex] - log(5)))/2

= (([tex]e^log(6)[/tex])/([tex]e^log(5)[/tex]) - ([tex]e^-log(6)[/tex])/([tex]e^-log(5)[/tex]))/2

= ((6/5) - (5/6))/2

= (36/30 - 25/30)/2

= 11/60

Therefore, sinh(log(6) - log(5)) = 11/60.

(b) The exact value of sin(arccos(76)) is undefined.

To calculate sin(arccos(76)) exactly, we can use the Pythagorean identity [tex]sin^2[/tex](x) + [tex]cos^2[/tex](x) = 1.

Let's assume arccos(76) = x. Applying the cosine function to both sides, we have cos(arccos(76)) = cos(x).

Since arccos and cosine are inverse functions, cos(arccos(76)) simplifies to 76.

Now, using the Pythagorean identity, we can calculate sin(x):

sin(x) = sqrt(1 - [tex]cos^2[/tex](x)) = sqrt(1 - 76^2) = sqrt(1 - 5776) = sqrt(-5775).

The square root of -5775 is an imaginary number, which cannot be expressed exactly without using complex numbers or numerical methods.

Therefore, the exact value of sin(arccos(76)) cannot be determined without using a calculator or numerical methods.

To know more about exact value refer here:

https://brainly.com/question/28209768#

#SPJ11

Answer:

1. 6 feet

2. 6.25 feet

3. 1 feet

4. 6 feet

Step-by-step explanation:

The equation is : [tex]$h(x)=x^2-7x+6$[/tex]

1. The diving board is where Kendra dives off. Here, the horizontal distance, x from the diving board is 0.

So, substituting x = 0 in the equation, we get

[tex]$h(0)=0^2-7(0)+6$[/tex]

       [tex]$=0-0+6$[/tex]

       [tex]$=6$[/tex]

So, the diving board is 6 feet above the surface of the water.

2. From the equation, we known that it is a parabola and the vertex is minimum.

   It is the minimum height which represents the depth Kendra dives into the water.

So the [tex]$x$[/tex] coordinate of the vertex is = [tex]$\frac{-b}{2a}$[/tex]

Here, a and b are the coefficients of linear term and the quadratic terms in the equation. Therefore,

a = 1 and b = -7

∴  x coordinate = [tex]$\frac{-(-7)}{2 \times 1} $[/tex]

                         [tex]$\frac{7}{2}=3.5$[/tex]

Now substituting to find f(x),

[tex]$h(3.5)=(3.5)^2-7(3.5)+6$[/tex]

         = -6.25

Therefore, the diver dives 6.25 feet below the water surface.

3. The horizontal distance from the board the diver enters into the water.

This is the y-intercept and it is the value of x when h(x)=0.

∴ [tex]$0=x^2-7x+6$[/tex]

Factorizing, we get   [tex]$(x-1)(x-6)=0$[/tex]

∴ [tex]$x=1 \text{ or}\ x=6$[/tex]

So there are two solutions that are the two x intercepts of the function. Here at x = 1 shows the horizontal distance from the board from where Kendra dives into the water.

4. We know that the equation given has [tex]$\text{two}$[/tex] x intercepts. These two x intercepts  are the points where the parabola crosses the x-axis, which is the height [tex]$h(x)=0$[/tex]. The height is the water surface level.

The first x intercept represents the points where Kendra dives into the water.

And the second x intercept is the point where Kendra comes out of the water surface. This this is [tex]$x=6$[/tex] for [tex]$h(x)=0$[/tex].

Thus Kendra dives out of the water surface at 6 feet from the board.

Answer:

Step-by-step explanation:

(5,3) should be your slope. Start from the bottom of the line and go up. Use the X axis slope 1st because of the x1 y1 coordinates.

Answer:

(5,-1)

(-4,0)

Step-by-step explanation:

5 is in the X axis

-1 is in the Y axis

-4 is in the Y axis

0 is in the X axis