Good cardiac biomarkers typically have a HIGH concentration in the peripheral blood, which is one of their distinguishing traits.
A biomarker that accurately predicts heart injury is one that is normal. The cardiac biomarker levels in your blood are determined by this test. Enzymes, hormones, and proteins are some examples of these markers. After your heart has been put under a lot of stress and has become harmed from not getting enough oxygen, cardiac biomarkers become visible in your blood. This could be the result of a heart attack.
Cardiac indicators are biomarkers that can be used to assess heart health. They may be helpful in the early diagnosis or prediction of disease. Even though they are frequently mentioned in relation to myocardial infarction, other diseases can cause an increase in cardiac.
To learn more about Good cardiac please click on below link
https://brainly.com/question/28121497
#SPJ4
What type of circuit has a broken path that does NOT let current flow through it?
A : Closed circuit
B: Open circut
C : Toggle
D : Switch
Answer:
B
Explanation:
When the volume and concentration of a base that completely neutralizes an acid is known, you can determine the concentration of the acid due to at the point of neutralization, the number of moles of acid equals the number of moles of base.
why does this happen? (btw this is describing titration) the criteria for the answer is
"Try to answer why the results occurred. If you are in chemistry, what is happening at the molecular level with bonding, electrons, etc. " WILL MARK BRAINLIEST!!!!
Answer:
30
Explanation:
What is the mass in grams of 9.02x10^28 atoms of Fe
Answer:
83.674 grams of Fe
Explanation:
9.02 x 10²⁸ atoms
To convert from atoms to grams, we first need to convert atoms to moles. To do this, divide the atoms by Avogadro's Number, 6.02 x 10²³
9.02 x 10²⁸ ÷ 6.02 x 10²³
= 1.498 moles of Fe
Now we need to convert moles to grams. To do this, multiply the moles by the molar mass of Fe. The molar mass can be found on the periodic table.
1.498 • 55.845
= 83.674 grams of Fe
Hope this helps!
How many atoms of hydrogen are there in one molecule of water. if the chemical formula is H202 ?
a. 0
b. 1
c. 2
d. 3
PLEASE Answer asap! What characteristics are shared by all alkali metals and alkaline earth metals?
A. They conduct electricity very well
B. They are strong and shiny
C. They form alkaline solutions when mixed with water
D. They do not react with water at all
Answer:
C
Explanation:
Mostly all of them but most likely C
How do you know if a material is an elernent or a compound?
Explanation:
Elements and compounds are both examples of pure substances. A substance that cannot be broken down into chemically simpler components is an element. ... A substance that can be broken down into chemically simpler components (because it has more than oneelement) is a compound.
What molecular shape is this lewis structure?
A. Trigonal pyramidal
B. Trigonal planar
C. Bent
D. Tetrahedral
E. Linear
Answer:C
Explanation: I learnet it too but more time ago hope its good
A majority of the world's electricity comes from water power.
True
False
Answer:
True.
Explanation:
The Universal Space Agency wants to know the results of your Sim investigation. Write your report to the lead chemist, explaining why there is liquid water on the outside of the can but no liquid nitrogen. Use evidence from your investigation in your explanation.
Answer:
Due to warm temperature.
Explanation:
There is water present in liquid form instead of liquid nitrogen on the outer side of the can because of the temperature present in the surrounding environment. The temperature around the can is little warm which is favourable for the water but not for the liquid nitrogen. The liquid nitrogen present in liquid state when the temperature of the surrounding is too cold. if it is warm, the liquid nitrogen starts boiling and converts into gaseous state so that's why the warmer temperature is responsible for the presence of water not the liquid nitrogen.
What happens to sediments that get deposited in basins?
Sedimentary basins are regions of the Earth where long-term subsidence creates accommodation space for accumulation of sediments. As the sediments are buried, they are subject to increasing pressure and begin the processes of compaction and lithification that transform them into sedimentary rock.
Answer: Sedimentary basins are regions of the Earth where long-term subsidence creates accommodation space for accumulation of sediments. As the sediments are buried,
Explanation:Hopeits right i fount it on a site
how does a drought (lack of water) affect an ecosystem?
When a drought occurs, their food supply can shrink and their habitat can be damaged. Lack of food and drinking water for wild animals. Increase in disease in wild animals, because of reduced food and water supplies. Migration of wildlife.
A gas has a volume of 5.00 L at 20 degrees Celsius. What is the volume of gas at 150 degrees Celsius.
Answer:
7.22 L
Explanation:
From the question,
Applying Charles law,
V₁/T₁ = V₂/T₂...................... Equation 1
Where V₁ = Initial volume of gas, V₂ = Final volume of gas, T₁ = Initial Temperature of gas in Kelvin, T₂ = Final Temperature of gas in Kelvin
Make V₂ the subject of the equation
V₂ = (V₁×T₂)/T₁................. Equation 2
Given: V₁ = 5.00 L, T₁ = 20 °C = (20+273) K = 293 K, T₂ = 150 °C = (150+273) K = 423 K
Substitute these value into equation 2
V₂ = (5.00×423)/293
V₂ = 7.22 L
Please help me on this
Answer:
the answer is 3(decay) and
the second isa 1(alfa particle) has a mass of equal to helium nucleus
it is used to lift water from a well
Answer:
When air is admitted into the well, the water recedes from the level of static head to the bottom of the discharge pipe. The displaced column of liquid rises up the discharge pipe. Air bubbles mix with water and this reduces the specific gravity of the column of water sufficiently to lift it to the surface.
Explanation:
Guiding Question: How might a long-term drought in a nearby forest impact the herbivores living in the forest?
Answer:
Drought can affect water sources, land, fish and wildlife and plant communities, and can also affect trees directly by slowing or arresting growth, and causing injury or death
Explanation:
Which of the elements shown will form ions, what will be the charges of those ions, and why will they have those charges?
Answer:
the sodium and chlorine are the form of ion
Explanation:
because sodium have tendency to loose electron it become positive ion and chlorine has tendency to gain electron it becomes negative ion
7.(05.02 MC)
The speed of light in four different materials is shown below:
Material Speed of light in thousand miles per second
A
140
B
78
С
186
D
12
Which material is the most dense? (4 points)
Material A
Material B
Material C
Material D
Answer:
C
Explanation:
thats the answer!! HEHEHHEHHHHSJSKSSSSJS
Answer: B or A
Explanation: Everyone is saying C and i just took the test and it is not C
An organism that can make its own food may be classified into one of several kingdoms, depending on other characteristics. Based on this information, in which of the following kingdoms would this organism NOT be classified?
Archaea
Fungi
Plant
Protista
Help me!!!!!
The would not be classified into archaea.
So, A.
the more the energy, the larger the (a,b,c,d)?
A:crest
B:trough
C:amplitude
D:wavelength
Answer: D:wavelenght
Explanation: Students will understand that shorter wavelengths have higher frequency and energy.
Answer:
C I believe... I might be wrong though
Explanation:
The "fuel" in most combustion reactions
is a hydrocarbon. Using the examples in
Model 2, write a description for the
classification of substances known as
hydrocarbons.
Answer:
hydracarbons are substances consisting of carbon and hydrogen only
Explanation:
Why do silver and copper have similar properties?
(7th Grade science)
Answer:
They are both listed under group 11 on the periodic table and both are highly conductive of electricity
Explanation:
HOPE THIS HELPS ^^
how many moles of ammonia could be obtained from a maximum of 5.0 moles of nitrogen
Answer:
10 moles of ammonia could be obtained from a maximum of 5.0 moles of nitrogen.
Explanation:
The balanced reaction is:
N₂ + 3 H₂ → 2 NH₃
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
N₂: 1 moleH₂: 3 molesNH₃: 2 molesThen you can apply the following rule of three: if by reaction stoichiometry 1 mole of nitrogen produces 2 moles of ammonia, 5 moles of nitrogen produces how many moles of ammonia?
[tex]moles of ammonia=\frac{5 moles of nitrogen*2 moles of ammonia}{1 mole of nitrogen}[/tex]
moles of ammonia= 10
10 moles of ammonia could be obtained from a maximum of 5.0 moles of nitrogen.
please help
whats the skeleton equation
for this equation
copper sulfate + sodium hydroxide --> copper hydroxide
Answer:
Copper(II) sulphate – sodium hydroxide reaction
The reaction between copper(Il) sulphate and sodium hydroxide solutions is a good place to start. If you slowly add one to the other while stirring, you will get a precipitate of copper(II) hydroxide, Cu(OH)2.
what do a bald eagle, a komodo dragon, and a lizard have in common
Answer:
All of them derive from a common ancestor. They each share something in their DNA that ties into their past selves, which were more closely related. As they evolved, they became more and more distant, but we can still trace them back to the olden days.
Also they all have scales.
Hope this was at least semi-useful.
Please help me it's urgent!!!!!
Round the following number to 3 significant figures:
15937
pls helpppp
Answer:
15900
Explanation:
I think hope this helps!! :D
Answer:
15900
Explanation:
how would you prepare 500 ml of a .50m solution of naoh from a 2 m stock solution
Explanation:
i.e M = m/V(L)
M= Molarity of substance
m = number of moles of substance (i.e solute)
V(L) = volume of solution in Litres
So talking about our question molarity should be 0.5 M,volume should be 0.1 L , and we should know that Molar Mass of NaOH is 40 because Atomic mass of Sodium i.e (Na known as Natrium) is 23,Atomic mass of Oxygen (O) is 16 and Atomic mass of Hydrogen is 1.
Adding them all up gives Molecular mass of NaOH as 40
So if we solve above equation we get no of moles of NaOH present in 0.1 litres of solution
Let’s do that math
Rearranging equation we get m=M×V(L) i.e m= 0.5×0.1 =0.05. So 0.05 moles of NaOH are present in 100 ml of 0.5 Molar solution
Now we also know that to find no of moles of a substance we have a formula and it is m=W/Mw where
m = no of moles of a substance
W = Mass of substance
Mw = Molecular weight of the substance
So substituting all values and rearranging equation we get mass of NaOH as
W=m×Mw = 0.05×40=2 grams
Hence we found the required mass of NaOH as 2 grams.
Now talking about shortcut
we know as explained above M=m/V(L) and m=W/M
Substituting value of m(no of moles) in M=m/V(L) we get M=WMw×V(L)
Try substituting the values yourself and get the answer
Note :: The value of Volume should always be substituted in terms of Litre only. That is the reason i used the letter (L) at all the places with V
So thats all get the answer and comment any other problems below
Hope you got your problem solved
Thanks!!!
Why does photosynthesis require 6 molecules of carbon dioxide and 6 molecules of water to make 1 molecule of glucose
For each molecule of glucose produced: 6 water water molecules are oxidized, and come to be the supply of electrons for carbon dioxide reduction. 6 molecules of carbon dioxide are required, one for every carbon atom in glucose. 6 molecules of oxygen are produced as a with the aid of made from water oxidation.
What is the density of an object that has a mass of 10 grams and a volume of 5 mL?
Answer:
2 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question we have
[tex]density = \frac{10}{5} = 2 \\ [/tex]
We have the final answer as
2 g/mLHope this helps you
A student performs an acid-base titration experiment to determine the amount of ascorbic acid in different brands of juice. Which solution should the student use as the base solution in this acid-base titration experiment?
A.) HCl
B.) NaOH
C.) LiBr
D.)CaCl2
Answer:
idn Mann nnnnnnnn . .....mmmmm mmmm aaaaaaa it's a
The answer is Option B, NaOH is the solution student should use as the base solution in this acid-base titration experiment to determine the amount of ascorbic acid in different brands of juice.
What is an Acid Base Titration ?
An acid–base titration is a method of quantitative analysis.
It is used for determining the concentration of an acid or base by neutralizing it with a standard solution of base or acid of known concentration.
An indicator is used to monitor the progress of the acid–base reaction.
Ascorbic acid, HC₆H₇O₆ is an acid. So can be titrated with a base , sodium hydroxide, NaOH using the indicator, phenolphthalein.
HC₆H₇O₆(aq) + NaOH(aq) → NaHC₆H₇O₆(aq) + H₂O(l)
Among the options , HCl is an acid , LiBr , CaCl₂ are salts , NaOH is the only base.
Phenolphthalein changes from colorless to pink (or red) when all of the acid gets neutralized.
Therefore NaOH is the solution student should use as the base solution in this acid-base titration experiment to determine the amount of ascorbic acid in different brands of juice.
To know more about Acid Base Titration
https://brainly.com/question/15220646
#SPJ2