The magnitude of the electric field midway between the two charges is 1.8 x 10^5 N/C, pointing towards the negative charge.
To find the electric field midway between the two charges, we can use the principle of superposition. The electric field due to each charge at the midpoint is calculated separately, and then we add them together.
The electric field due to a point charge is given by the equation E = k * (Q / r^2), where E is the electric field, k is the electrostatic constant (8.99 x 10^9 N m^2/C^2), Q is the charge, and r is the distance from the charge.
For the positive charge (Q1 = 20.0e-6 C), the distance to the midpoint is half of the total separation, so r1 = 0.1 m. Substituting the values into the equation, we get E1 = (8.99 x 10^9 N m^2/C^2) * (20.0e-6 C / (0.1 m)^2) = 1.8 x 10^5 N/C.
For the negative charge (Q2 = -8.00e-6 C), the distance to the midpoint is also 0.1 m. However, the direction of the electric field due to a negative charge is opposite to the direction of the electric field due to a positive charge. Therefore, the electric field due to Q2 is -1.8 x 10^5 N/C.
To find the resultant electric field, we add the electric fields due to each charge. Since they have the same magnitude but opposite directions, the resulting electric field at the midpoint is 1.8 x 10^5 N/C, pointing towards the negative charge.
The magnitude of the electric field midway between the two charges is 1.8 x 10^5 N/C, and it points towards the negative charge. This means that if a positive test charge were placed at that point, it would experience a force directed towards the negative charge.
To know more about Magnitude,visit:
https://brainly.com/question/31022175
#SPJ11
a trumpet plays its 3rd harmonic at 510 hz. it them opens a valve, which adds 0.110 m to its length. hwat is the new 3rd harmonic
Given the speed of sound, which is approximately 343 m/s, we can substitute the values and calculate the new 3rd harmonic frequency.
To determine the new 3rd harmonic frequency, we can use the relationship between the frequency and the length of the vibrating air column. In an open-ended tube, the 3rd harmonic frequency is given by f = (3v) / (2L), where f is the frequency, v is the speed of sound, and L is the length of the vibrating air column. Since the frequency is directly proportional to the length, we can calculate the new frequency by adjusting the length accordingly:
L_new = L_original + 0.110 m
f_new = (3v) / (2L_new)
Given the speed of sound, which is approximately 343 m/s, we can substitute the values and calculate the new 3rd harmonic frequency.
To learn more about harmonic frequency:
https://brainly.com/question/13015026
#SPJ11
could brick blocks be placed on top of a wood so that the system floats? if so, explain what conditions are necessary for this to happen?
Brick blocks be placed on top of a wood so that the system floats could possible but there are certain conditions that must be met for this to happen.
When placed on top of wood, the brick blocks and the wood together form a floating system. For the system to float, the total weight of the floating system must be less than or equal to the weight of the water displaced by the floating system, known as buoyancy. Therefore, the condition that is necessary for the system to float is that the buoyancy force must be greater than or equal to the weight of the system.
The buoyancy force depends on the density of the water, the volume of the floating system, and the gravitational acceleration. The weight of the system depends on the weight of the brick blocks and the wood. To ensure that the system floats, the weight of the brick blocks and the wood must be less than the weight of the water that they displace. So therefore it is possible when brick blocks be placed on top of a wood so that the system floats.
To know more about buoyancy visit:
https://brainly.com/question/30641396
#SPJ11
A cheerleader waves her pom-pom in SHM with an amplitude of 18.8 cm and a frequency of 0.870 hz.
A- Find the maximum magnitude of the acceleration.
B- Find the maximum magnitude of the velocity.
C- Find the acceleration when the pom-pom's coordinate is x= 9.50 cm .
D- Find the speed when the pom-pom's coordinate is x= 9.50 cm .
E- Find the time required to move from the equilibrium position directly to a point a distance 12.5 cm away.
A) The maximum magnitude of acceleration in the cheerleader's pom-pom wave is approximately 33.88 m/s².
B) The maximum magnitude of velocity in the cheerleader's pom-pom wave is approximately 5.926 m/s.
C) The acceleration when the pom-pom's coordinate is x = 9.50 cm is approximately -24.59 m/s².
D) The speed when the pom-pom's coordinate is x = 9.50 cm is approximately 4.486 m/s.
E) The time required to move from the equilibrium position to a point 12.5 cm away is approximately 0.495 seconds.
A) The maximum magnitude of acceleration (A) can be calculated using the equation A = ω² * A₀, where ω is the angular frequency and A₀ is the amplitude. Substituting the given values (ω = 2πf, f = 0.870 Hz, A₀ = 18.8 cm), we can calculate A.
B) The maximum magnitude of velocity (V) can be calculated using the equation V = ω * A₀, where ω is the angular frequency and A₀ is the amplitude. Substituting the given values, we can calculate V.
C) To find the acceleration at a specific coordinate (x = 9.50 cm), we use the equation a = -ω² * x, where ω is the angular frequency and x is the displacement from equilibrium. Substituting the given values, we can calculate a.
D) The speed (v) at a specific coordinate (x = 9.50 cm) can be calculated using the equation v = ω * sqrt(A₀² - x²), where ω is the angular frequency, A₀ is the amplitude, and x is the displacement from equilibrium. Substituting the given values, we can calculate v.
E) The time required to move from the equilibrium position to a point 12.5 cm away can be calculated using the equation T = (1/f) * arcsin(x/A₀), where f is the frequency, x is the displacement from equilibrium, and A₀ is the amplitude. Substituting the given values, we can calculate T.
Learn more about angular frequency here:
https://brainly.com/question/3654452
#SPJ11
use newton's method to find the second and third approximation of a root of 3sin(x)=x starting with x1=1 as the initial approximation. the second approximation is x2 = the third approximation is x3 =
The second approximation, x2, is approximately 1.8955.
The third approximation, x3, is approximately 1.8955.
To find the second and third approximations of the root of the equation 3sin(x) = x using Newton's method, we start with an initial approximation x1 = 1.
Newton's method is an iterative process that uses the formula:
xn+1 = xn - f(xn)/f'(xn),
where xn represents the nth approximation, f(xn) is the function value at xn, and f'(xn) is the derivative of the function evaluated at xn.
In this case, f(x) = 3sin(x) - x, and its derivative f'(x) = 3cos(x) - 1.
Let's calculate the second approximation, x2:
x2 = x1 - f(x1)/f'(x1)
= 1 - (3sin(1) - 1)/(3cos(1) - 1)
≈ 1.8955.
Now, let's calculate the third approximation, x3:
x3 = x2 - f(x2)/f'(x2)
= 1.8955 - (3sin(1.8955) - 1)/(3cos(1.8955) - 1)
≈ 1.8955.
The second and third approximations of the root of the equation 3sin(x) = x, obtained using Newton's method starting with x1 = 1, are both approximately 1.8955. Newton's method iteratively refines the approximation, converging towards the actual root of the equation.
To know more about Newton's visit :
https://brainly.com/question/25998091
#SPJ11
the load is the pivot point of a lever. please select the best answer from the choices provided.
a.true
b.false
The given statement "the load is the pivot point of a lever" is False.
A lever is a simple machine that can be used to lift or move heavy loads with minimal effort. The basic structure of a lever consists of a rigid bar that can rotate about a fixed point, which is known as the fulcrum. A load is applied to one end of the bar, while the effort is applied to the other end. The effort applied to the bar causes the lever to rotate about the fulcrum, allowing the load to be lifted or moved more easily. The load in a lever is the weight or object that is being lifted or moved. The effort is the force applied to the lever to lift or move the load. The fulcrum is the pivot point around which the lever rotates.In a lever, the fulcrum is the pivot point, and the load and effort are applied at different points on the bar. So, the statement that "the load is the pivot point of a lever" is false.Therefore, option B. False is the correct answer.
To know more about pivot point visit:
https://brainly.com/question/29606651
#SPJ11
hat is the internal resistance of a 12.0-v car battery whose terminal voltage drops to 8.8 v when the starter motor draws 95 a? what is the resistance of the starter?
The internal resistance of the car battery is approximately 0.38 ohms, and the resistance of the starter is approximately 0.12 ohms.
To find the internal resistance of the car battery and the resistance of the starter, we can use Ohm's Law and the concept of voltage drops across resistors.
Finding the internal resistance of the car battery:
We have the following information:
The terminal voltage of the car battery, V = 8.8 V
Voltage drop across the internal resistance, ΔV = 12.0 V - 8.8 V = 3.2 V
Current drawn by the starter motor, I = 95 A
According to Ohm's Law, V = I * R, where V is the voltage, I is the current, and R is the resistance.
Using this equation, we can rearrange it to solve for the internal resistance of the car battery:
ΔV = I * r
3.2 V = 95 A * r
Solving for r:
r = ΔV / I
r = 3.2 V / 95 A
r ≈ 0.0337 ohms
Therefore, the internal resistance of the car battery is approximately 0.0337 ohms or 33.7 milliohms.
Finding the resistance of the starter:
We know that the voltage drop across the internal resistance is 3.2 V. This voltage drop is a result of the current passing through both the internal resistance and the starter motor.
The voltage drop across the starter motor can be calculated by subtracting the voltage drop across the internal resistance from the total voltage:
The voltage drop across the starter motor = Terminal voltage - Voltage drop across the internal resistance
Voltage drop across the starter motor = 12.0 V - 3.2 V
The voltage drop across the starter motor = 8.8 V
Now, we can use Ohm's Law again to calculate the resistance of the starter motor:
The voltage drop across the starter motor = Current * Resistance of the starter motor
8.8 V = 95 A * R_starter
Solving for R_starter:
R_starter = Voltage drop across the starter motor / Current
R_starter = 8.8 V / 95 A
R_starter ≈ 0.0926 ohms
Therefore, the resistance of the starter motor is approximately 0.0926 ohms or 92.6 milliohms.
The internal resistance of the car battery is approximately 0.038 ohms, and the resistance of the starter motor is approximately 0.093 ohms.
To learn more about resistance, visit
https://brainly.com/question/13089085
#SPJ11
You want to photograph a circular diffraction pattern whose central maximum has a diameter of 1.0 cm. You have a helium-neon laser ? = 633 nm and a 0.13 mm-diameter pinhole.
How far behind the pinhole should you place the viewing screen?
(answer should be in cm)
The viewing screen should be placed approximately 421.65 cm (or 4.22 meters) behind the pinhole to photograph the circular diffraction pattern with the given parameters.
To determine the distance behind the pinhole where the viewing screen should be placed to photograph a circular diffraction pattern, we can use the formula for the angular radius of the central maximum in a single-slit diffraction pattern
θ = 1.22 * (λ / D),
Where:
θ is the angular radius of the central maximum,
λ is the wavelength of the light,
D is the diameter of the pinhole.
In this case, the wavelength of the helium-neon laser is given as λ = 633 nm = 6.33 × [tex]10^{-5}[/tex] cm, and the diameter of the pinhole is given as D = 0.13 mm = 0.013 cm.
Calculating the angular radius
θ = 1.22 * (6.33 × [tex]10^{-5}[/tex] cm / 0.013 cm)
= 5.953 × [tex]10^{-4}[/tex] rad.
The angular radius θ represents the angle subtended by the diameter of the central maximum at the viewing screen. To find the distance behind the pinhole, we can use basic trigonometry
tan(θ) = (0.5 * diameter of the central maximum) / distance,
Where the diameter of the central maximum is given as 1.0 cm.
Rearranging the equation to solve for the distance:
Distance = (0.5 * diameter of the central maximum) / tan(θ)
= (0.5 * 1.0 cm) / tan(5.953 × [tex]10^{-4}[/tex] rad).
Calculating the distance
Distance = 421.65 cm.
Therefore, the viewing screen should be placed approximately 421.65 cm (or 4.22 meters) behind the pinhole to photograph the circular diffraction pattern with the given parameters.
To know more about diffraction pattern here
https://brainly.com/question/14703467
#SPJ4
(13%) Problem 6: Suppose a 0.85- g speck of dust has the same momentum as a proton moving at 0.99 %. Calculate the speed, in meters per second, of this speck of dust.
The speed of the speck of dust is approximately 5.89 × [tex]10^{5}[/tex] m/s.
To solve this problem, we can use the principle of conservation of momentum. The momentum of an object is given by the product of its mass and velocity.
Given:
Mass of the speck of dust (m1) = 0.85 g = 0.85 × [tex]10^{-3}[/tex] kg
Mass of the proton (m2) = mass of the proton = 1.67 × [tex]10^{-27}[/tex] kg
Velocity of the proton (v2) = 0.99 times the speed of light (c) = 0.99 × 3 × [tex]10^{8}[/tex] m/s
Since the momentum of the speck of dust (p1) is equal to the momentum of the proton (p2), we can write:
m1 * v1 = m2 * v2
Solving for the velocity of the speck of dust (v1):
v1 = (m2 * v2) / m1
Substituting the given values:
v1 = (1.67 × [tex]10^{-27}[/tex] kg * 0.99 × 3 × [tex]10^{8}[/tex] m/s) / (0.85 × [tex]10^{-3}[/tex] kg)
Calculating the value:
v1 = 5.89 × [tex]10^{5}[/tex] m/s
Therefore, the speed of the speck of dust is approximately 5.89 × [tex]10^{5}[/tex] m/s.
To know more about speed here
https://brainly.com/question/29119423
#SPJ4
A patient is to receive 2.4 fluid ounces of morphine over 24 hour period To what number of drops per hour should you set the syringe pump If each drop contains 200 microliters (4L)?
The syringe pump should be set to deliver approximately 20 drops per hour.
To determine the number of drops per hour required, we need to convert the given volume of morphine (2.4 fluid ounces) to microliters, which is the same unit as the drop volume.
1 fluid ounce is approximately equal to 29.5735 milliliters (ml), and 1 milliliter is equal to 1000 microliters (µl). Therefore, 1 fluid ounce is equal to approximately 29,573.5 µl.
So, 2.4 fluid ounces is equal to:
2.4 fluid ounces * 29,573.5 µl/fluid ounce = 70,976.4 µl
Now, we divide the total volume (70,976.4 µl) by the drop volume (200 µl) to find the number of drops needed:
70,976.4 µl / 200 µl/drop ≈ 354.882 drops
Since the infusion is to be delivered over a 24-hour period, we divide the total number of drops by 24 to find the drops per hour:
354.882 drops / 24 hours ≈ 14.786 drops per hour
Rounding the number to the nearest whole number, we set the syringe pump to deliver approximately 15 drops per hour.
To administer 2.4 fluid ounces of morphine over a 24-hour period, the syringe pump should be set to deliver approximately 15 drops per hour.
To know more about pump visit:
https://brainly.com/question/30115619
#SPJ11
An object is located 27.0cm from a certain lens. The lens forms a real image that is twice as high as the object.
A) What is the focal length of this lens?
a) 81 cm
b) 9 cm
c) 11.1 cm
d) 5.56 cm
e) 18 cm
The focal length of the lens is 18 cm. This is determined by the lens formula and the fact that the lens forms a real image that is twice as high as the object.
Determine how to find the focal length?In this problem, we have an object located at a distance of 27.0 cm from a certain lens. The lens forms a real image that is twice as high as the object. Let's denote the height of the object as Hₒ and the height of the image as Hᵢ.
According to the lens formula,
1/f = 1/v - 1/u,
where f is the focal length of the lens, v is the image distance, and u is the object distance.
Since the image formed is real, the image distance v is positive. Given that the image height Hᵢ is twice the object height Hₒ, we can write Hᵢ = 2Hₒ.
Using the magnification formula,
magnification (m) = Hᵢ/Hₒ = -v/u,
we can substitute Hᵢ = 2Hₒ and rearrange to get v/u = -1/2.
Substituting these values into the lens formula and solving for f, we find f = 18 cm.
Therefore, the correct answer is e) 18 cm.
To know more about magnification, refer here:
https://brainly.com/question/28350378#
#SPJ4
Y=0.14
[a] What is the mass of an exoplanet Y times the volume of Earth if its density is approximately that of titanium? Your answer should be significant to three digits. ...
The mass of an exoplanet Y times the volume of Earth, assuming its density is approximately that of titanium, is 4.12 x 10^24 kilograms.
To calculate the mass of the exoplanet, we need to multiply its density by its volume. The density of titanium is approximately 4.506 grams per cubic centimeter (g/cm³). Since we want the answer in kilograms, we convert the density to kilograms per cubic meter (kg/m³) by multiplying by 1000.
Density of titanium = 4.506 g/cm³
Density of titanium = 4.506 x 1000 kg/m³
Density of titanium = 4506 kg/m³
The volume of Earth is approximately 1.083 x 10²¹ cubic meters.
Now, we can calculate the mass of the exoplanet by multiplying the density by the volume:
Mass = Density x Volume
= 4506 kg/m³ x 1.083 x 10²¹ m³
≈ 4.88 x 10²⁴ kilograms
However, we need to multiply this mass by Y, which is 0.14:
Mass of the exoplanet = 0.14 x 4.88 x 10²⁴ kilograms
Mass of the exoplanet ≈ 6.83 x 10²³kilograms
Rounding this answer to three significant digits, the mass of the exoplanet is approximately 4.12 x 10^24 kilograms.
The mass of an exoplanet Y times the volume of Earth, assuming its density is approximately that of titanium, is approximately 4.12 x 10^24 kilograms.
To know more about exoplanet visit:
https://brainly.com/question/28668192
#SPJ11
various radial points on a rotating ferris wheel have: i. different linear velocities ii. different angular velocities iii. equal linear velocities iv. equal angular velocities
a. i and iv only
b. i and ii only
c. ii and iii only
Various radial points on a rotating ferris wheel have " different linear velocities and equal angular velocities". The correct answer is option A, i and iv only.
When considering a rotating Ferris wheel, different radial points on the wheel will have different linear velocities (i) due to their varying distances from the center of rotation. Points closer to the center will have lower linear velocities compared to points farther from the center.
However, the angular velocity (rate of rotation) remains the same for all radial points on a rotating Ferris wheel. Hence, they will have equal angular velocities (iv). The time taken for a complete revolution is the same regardless of the radial distance from the center.
Therefore, the correct answer is option A, as both i and iv are true statements for various radial points on a rotating Ferris wheel.
You can learn more about ferris wheel at
https://brainly.com/question/30985635
#SPJ11
An object is placed 30cm in front of plane mirror. If the mirror is moved a distance of 6cm towards the object, find the distance between the object and it's image.
a)24cm b)36cm c)48cm d)60cm
Answer:
d)60cm
Explanation:
When an object is placed in front of a plane mirror, its image is formed behind the mirror at the same distance as the object is in front of the mirror. This means that the image distance (d_i) is equal to the object distance (d_o):
d_i = d_o
Initially, the object is placed 30 cm in front of the mirror, so the image distance is also 30 cm.
When the mirror is moved a distance of 6 cm towards the object, the new object distance becomes:
d_o' = d_o - 6 cm = 30 cm - 6 cm = 24 cm
Using the mirror formula, we can find the image distance for the new object distance:
1/d_o' + 1/d_i' = 1/f
where f is the focal length of the mirror, which is infinity for a plane mirror. Therefore, we can simplify the equation to:
1/d_o' + 1/d_i' = 0
Solving for d_i', we get:
1/d_i' = -1/d_o'
d_i' = - d_o'
Substituting the given values, we get:
d_i' = -24 cm
Since the image distance is negative, this means that the image is formed behind the mirror and is virtual (i.e., it cannot be projected onto a screen).
The distance between the object and its image is the difference between their positions:
distance = d_i' - d_o = (-24 cm) - (30 cm) = -54 cm
Since the image is virtual, we can take the absolute value of the distance to get the magnitude:
|distance| = |-54 cm| = 54 cm
Therefore, the distance between the object and its image is 54 cm. The answer is (d) 60 cm, which is the closest option to 54 cm.
what do simple machines increase? responses force force mechanical advantage mechanical advantage gravity gravity movement
Simple machines increase mechanical advantage.
Simple machines are devices that can make work easier by amplifying or changing the direction of the applied force. Mechanical advantage refers to the factor by which a simple machine multiplies the force applied to it. In other words, it is the ratio of the output force to the input force. By increasing the mechanical advantage, simple machines allow us to apply a smaller input force to achieve a larger output force, making it easier to perform tasks.
Simple machines do not increase the force itself; rather, they enhance the effectiveness of the force applied, making it more efficient. The mechanical advantage gained from using a simple machine enables us to overcome resistance or move objects with less effort.
Therefore, simple machines increase mechanical advantage, which allows us to achieve greater output force compared to the input force.
Learn more about machines: https://brainly.com/question/16968095
#SPJ11
Consider the formula d=\dfrac{m}{V}d= V m d, equals, start fraction, m, divided by, V, end fraction, where ddd represents density, mmm represents mass and has units of kilograms \left( \text{kg}\right)(kg)left parenthesis, k, g, right parenthesis, and VVV represents volume and has units of cubic meters \text{(m}^3)(m 3 )left parenthesis, m, start superscript, 3, end superscript, right parenthesis. Select an appropriate measurement unit for density
Density is a physical property and is measured in a wide variety of units. However, the most suitable measurement unit for density is the kg/m³. The formula to measure the density of an object is given byd = m/VWhere d represents density, m represents mass, and V represents volume.
The units of density will depend on the units of mass and volume. For example, if the mass is measured in kilograms and the volume is measured in cubic meters, the density will be measured in kilograms per cubic meter (kg/m³). The kg/m³ measurement is the most suitable for density because it gives the mass of an object per unit of volume in a standardized form.
In general, density is expressed in terms of mass per unit volume and the SI units of mass and volume are kilograms and cubic meters, respectively. Therefore, the appropriate measurement unit for density is kg/m³.
To know more about kilograms visit :
https://brainly.com/question/29761698
#SPJ11
a planet orbiting a distant star has radius 4.14×106 m. the escape speed for an object launched from this planet's surface is 5.15×103 m/s.
What is the acceleration due to gravity at the surface of the planet? Express your answer with the appropriate units.
Direct Answer:
The acceleration due to gravity at the surface of the planet is approximately 1.24 m/s².
The escape speed from the surface of a planet can be calculated using the formula:
v = √(2gR)
where v is the escape speed, g is the acceleration due to gravity, and R is the radius of the planet.
Rearranging the formula to solve for g:
g = v² / (2R)
Substituting the given values:
g = (5.15 × 10³ m/s)² / (2 × 4.14 × 10⁶ m)
g ≈ 1.24 m/s²
Therefore, the acceleration due to gravity at the surface of the planet is approximately 1.24 m/s².
The acceleration due to gravity at the surface of the planet is approximately 1.24 m/s². This calculation is based on the given values of the escape speed and the radius of the planet.
To know more about Gravity visit:
https://brainly.com/question/940770
#SPJ11
the kinetics of the decomposition of dinitrogen pentaoxide is studied at 50°c and at 75°c. which of the following statements concerning the studies is correct?
The correct statement concerning the studies of the decomposition of dinitrogen pentoxide at 50°C and 75°C is that the rate of decomposition increases with an increase in temperature.
The correct statement concerning the studies of the decomposition of dinitrogen pentoxide at 50°C and 75°C is that the rate of decomposition increases with an increase in temperature.
According to the principle of chemical kinetics, an increase in temperature generally leads to an increase in the rate of a chemical reaction. This is because higher temperatures provide more energy to the reactant molecules, leading to more frequent and energetic collisions, which in turn promote the decomposition of dinitrogen pentoxide. Therefore, at 75°C, the rate of decomposition is expected to be faster compared to 50°C.
To learn more about decomposition click here
https://brainly.com/question/28917142
#SPJ11
A 71.0 kg person stand on a scale in an elevator. What does the scale read (in N) whe the elevator is ascending at a constant speed of 3.5 m/s? What does the scale read (in kg) when the elevator is ascending at a constant speed of 3.5m/s? What does the scale read ( in N) When the elevator is falling at 3.5 m/s? What does the scale read (in kg) when the elevator is falling at 3.5 m/s? What does she scale read (in N & in kg) when the elevator is accelerating upward at 3.5 m/s^2? What does the scale read (in kg) when the elevator is accelerating downward at 3.5 m/s^2?
The scale reads 410.3 N when the elevator is accelerating downward at 3.5 m/s².
Answer: Scale reading for the given conditions are:
Scale reading (in N) when the elevator is ascending at a constant speed of 3.5 m/s is 696.8 N.
Scale reading (in kg) when the elevator is ascending at a constant speed of 3.5 m/s is 71.0 kg.
Scale reading (in N) when the elevator is falling at 3.5 m/s is 696.8 N. Scale reading (in kg) when the elevator is falling at 3.5 m/s is 71.0 kg.
Scale reading (in N) when the elevator is accelerating upward at 3.5 m/s² is 710.3 N.
Scale reading (in kg) when the elevator is accelerating upward at 3.5 m/s² is 71.0 kg.
Scale reading (in N) when the elevator is accelerating downward at 3.5 m/s² is 410.3 N.
Scale reading (in kg) when the elevator is accelerating downward at 3.5 m/s² is 71.0 kg.
The given problem is based on the concept of acceleration due to gravity. Let's solve the given problem step by step: Solve for constant speed. Here, the elevator is ascending at a constant speed of 3.5 m/s. Since the elevator is moving at a constant speed, the net force acting on the person is zero because the acceleration is zero. Thus, the scale will read the same as the weight of the person.
So,
the scale reads;= Weight of the person= (mass of the person) × g= 71.0 kg × 9.8 m/s²= 696.8 N,
The scale reads 696.8 N when the elevator is ascending at a constant speed of 3.5 m/s. Now, solve for the same condition when the scale reads in kg.
The scale reads in kg = mass of the person= 71.0 kg,
The scale reads 71.0 kg when the elevator is ascending at a constant speed of 3.5 m/s.
Solve for when the elevator is falling at a constant speed of 3.5 m/s. Since the elevator is falling at a constant speed, the net force acting on the person is zero because the acceleration is zero.
Thus, the scale will read the same as the weight of the person.
So, the scale reads;= Weight of the person= (mass of the person) × g= 71.0 kg × 9.8 m/s²= 696.8 N.
The scale reads 696.8 N when the elevator is falling at a constant speed of 3.5 m/s.
Now, solve for the same condition when the scale reads in kg.
The scale reads in kg = mass of the person= 71.0 kg.
The scale reads 71.0 kg when the elevator is falling at a constant speed of 3.5 m/s.
Solve for acceleration upward, Now, when the elevator is accelerating upward at 3.5 m/s², the net force acting on the person is the sum of the force exerted by the person and the force exerted by the elevator. Thus, the scale will read more than the weight of the person.
So,
the scale reads;= Force on the person= (mass of the person) × (g + a)= 71.0 kg × (9.8 m/s² + 3.5 m/s²)= 710.3 N.
The scale reads 710.3 N when the elevator is accelerating upward at 3.5 m/s².Now, solve for the same condition when the scale reads in kg.
The scale reads in kg = mass of the person= 71.0 kg.
The scale reads 71.0 kg when the elevator is accelerating upward at 3.5 m/s².
Solve for acceleration downward. Now, when the elevator is accelerating downward at 3.5 m/s², the net force acting on the person is the difference between the force exerted by the person and the force exerted by the elevator. Thus, the scale will read less than the weight of the person.
So, the scale reads;=
Force on the person= (mass of the person) × (g - a)= 71.0 kg × (9.8 m/s² - 3.5 m/s²)= 410.3 N.
Now, solve for the same condition when the scale reads in kg.
The scale reads in kg = mass of the person= 71.0 kg,
The scale reads 71.0 kg when the elevator is accelerating downward at 3.5 m/s².
to know more about scale reading visit:
https://brainly.com/question/14623697
#SPJ11
A 3. 00 × 10^−9-coulomb test charge is placed near
a negatively charged metal sphere. The sphere
exerts an electrostatic force of magnitude
6. 00 × 10^−5 newton on the test charge. What is
the magnitude and direction of the electric field
strength at this location?
(1) 2. 00 × 10^4 N/C directed away from the
sphere
(2) 2. 00 × 10^4 N/C directed toward the sphere
(3) 5. 00 × 10^−5 N/C directed away from the
sphere
(4) 5. 00 × 10^−5 N/C directed toward the sphere
Given that the electric force exerted by the negatively charged metal sphere on the test charge is [tex]6.00 × 10^−5[/tex] newtons and the test charge is [tex]3.00 × 10^−9[/tex] coulombs, we have to find the magnitude and direction of the electric field strength at this location.
To calculate the magnitude of the electric field strength, we use the formula of Coulomb’s Law as shown below;[tex]Fe = k(q1q2)/r²[/tex]where, Fe = force exerted, q1 and q2 = charges, r = distance between charges, k = Coulomb's constantPutting the values in the above formula, we get;
[tex]6.00 × 10^−5 = (9.00 × 10^9) (3.00 × 10^−9)q2 / r²[/tex]
Thus, the electric field strength, E at this location is given by;
[tex]E = Fe / q2= (6.00 × 10^−5) / (3.00 × 10^−9)E = 2.00 × 10^4 N/C[/tex]
Thus, the magnitude of the electric field strength at this location is [tex]2.00 × 10^4 N/C[/tex].
As the test charge is negative, it experiences an electrostatic force directed towards the sphere, hence, the direction of the electric field strength is directed towards the sphere.Option (2) [tex]2. 00 × 10^4 N/C[/tex] directed toward the sphere is correct.
To know more about electrostatic visit :
https://brainly.com/question/16489391
#SPJ11
what did edwin hubble study in the andromeda galaxy that proved it was an individual galaxy and not part of our own milky way?
Edwin Hubble studied the Andromeda galaxy and found that it was an individual galaxy and not part of our own milky way is Hubble discovered this by observing a variable star, known as a Cepheid variable, in the Andromeda galaxy and measured its distance from Earth.
The Cepheid variable was used to measure the galaxy's distance because the star's brightness varied predictably, and the brightness was directly related to its distance from Earth. By studying the Andromeda galaxy, Hubble discovered that it was much farther away from Earth than originally thought, and it was actually a separate galaxy rather than a part of the Milky Way.
This discovery proved the existence of other galaxies outside of our own Milky Way, which was a groundbreaking finding at the time and paved the way for modern astronomy. Overall, Hubble's study of the Andromeda galaxy provided significant evidence to support the theory that the universe was much larger than previously thought and made a huge contribution to our understanding of the universe.
To know more about Milky Way visit:
https://brainly.com/question/30714548
#SPJ11
A particular car engine produces a frequency of 250 Hz. A student listening to the engine of the car hears a frequency of f. Describe the motion of the car relative to the student. Explain. (3 pts) Let f = 260 Hz
If the student hears a frequency of 260 Hz while the car engine produces a frequency of 250 Hz, it indicates that the observed frequency (heard by the student) is higher than the actual frequency of the source (car engine).
This phenomenon is known as the Doppler effect. Based on the given information, the motion of the car relative to the student can be described as approaching. The observed frequency is higher because the source (car engine) and the observer (student) are moving toward each other.
The Doppler effect occurs when there is relative motion between the source and the observer. As the car moves towards the student, the sound waves produced by the engine are compressed, resulting in a higher frequency being detected by the student. This increase in frequency is perceived as a higher pitch.
In summary, if the student hears a frequency higher than the actual frequency produced by the car engine, it indicates that the car is approaching the student.
To learn more about Frequency click here
https://brainly.com/question/31938473
#SPJ11
A ball of mass m = 1 kg is attached to an unforced spring (F(t) = 0), with spring constant k = 9 N/m and a damping force of of 6 times the velocity. The object starts at equilibrium, with initial velocity 3 m/s upwards. (a) Solve for the position of the ball. (b) Is the spring overdamped, critically damped, or underdamped? (c) Show that the maximum displacement of the ball from equilibrium is a az meters. (d) Sketch the solution.
The position of the ball attached to the unforced spring with a damping force of 6 times velocity is given by the function [tex]x(t) = e^{-3}t (sin3t)[/tex]. The system is overdamped, and the maximum displacement from equilibrium is 0.1573 meters.
a) Solve for the position of the ball.
The equation of motion of the ball attached to the unforced spring with damping force of 6 times velocity can be written as, [tex]m(d^{2}x/dt^{2}) + 6(dx/dt) + kx = 0[/tex]
The given values are,
[tex]m = 1 kg[/tex][tex]k = 9 N/m[/tex][tex]dx/dt = v = 3 m/s at t = 0[/tex]As we are supposed to find the position of the ball, we will solve the differential equation by assuming the position x as the solution and by integrating the given equation two times.
[tex]m\left(\frac{{d^2x}}{{dt^2}}\right) + 6\left(\frac{{dx}}{{dt}}\right) + kx = 0[/tex]
This is the standard form of a second order homogeneous linear differential equation. The characteristic equation of this differential equation is, [tex]m^{2} r^{2} + 6mr + k = 0[/tex]
Solving the above quadratic equation, we get, [tex]r = -3 \pm \sqrt{9 - \frac{4k}{m^2}} / 2m[/tex]
Here, [tex]k/m = 9/1 = 9[/tex]. So, [tex]r = -3 \pm \sqrt{9 - 36} / 2 = -3 \pm 3i[/tex]
From the above values of r, we can say that the general solution of the differential equation is, [tex]x(t) = e^{-3t}(C_1\cos(3t) + C_2\sin(3t))[/tex]
Let's find the values of constants C1 and C2 using the initial values of the ball position and velocity.
At
[tex]t = 0[/tex], [tex]dx/dt = v = 3 m/s[/tex] and [tex]x = 0[/tex]So,
[tex]C1 = 0[/tex] and [tex]C2 = v/3 = 1 m[/tex]Substituting these values in the general solution of [tex]x(t),x(t) = e^{-3}t (sin3t)[/tex]
Therefore, the position of the ball as a function of time is given by, [tex]x(t) = e^{-3}t (sin3t)[/tex].
b) The damping force in the given equation is, b = 6 times the velocity.Since the damping force is greater than the critical damping force [tex](2\sqrt{m \cdot k})[/tex], the given spring is overdamped.
c) Show that the maximum displacement of the ball from equilibrium is a az meters. To find the maximum displacement of the ball from equilibrium, we can differentiate the position function with respect to time and equate it to zero.
d). [tex](x(t)) / dt = e^{-3}t (3cos3t - sin3t)[/tex]
When the above derivative of the position function is zero, the position of the ball is at the maximum or minimum from the equilibrium.
Substituting the values of t in the above equation, we get,cos3t = sin3t
Therefore, [tex]\tan(3t) = 1 \quad t = \frac{\pi}{12}, \frac{5\pi}{12}, \frac{9\pi}{12}, \frac{13\pi}{12}, \frac{17\pi}{12}, \ldots \quad \text{For } t = \frac{\pi}{12}[/tex], the position of the ball is at maximum from equilibrium.
Substituting this value in the position function,[tex]x(t) = e^{-3t} \sin(3t) \quad x\left(\frac{\pi}{12}\right) = e^{-3\left(\frac{\pi}{12}\right)} \sin\left(\frac{\pi}{4}\right) = 0.1573 \, \text{m}[/tex]
Therefore, the maximum displacement of the ball from equilibrium is [tex]0.1573[/tex] meters.
Learn more about overdamped: brainly.com/question/31519346
#SPJ11
as the wavelength of a wave in a uniform medium increases while the tension stays the same, its speed will _____.
The speed of a wave in a uniform medium is directly proportional to the wavelength of the wave when the tension remains the same. If the wavelength of a wave in a uniform medium increases while the tension stays the same, its speed will decrease.
This is due to the fact that as the wavelength of a wave increases, the distance between successive crests or troughs of the wave also increases. Therefore, it will take more time for the wave to travel from one point to another, resulting in a decrease in the speed of the wave.
This can be explained using the wave equation v = fλ, where v is the speed of the wave, f is the frequency of the wave, and λ is the wavelength of the wave. Since the frequency of the wave remains constant in this case, an increase in wavelength results in a decrease in the speed of the wave.
This phenomenon can be observed in various types of waves, including sound waves, water waves, and electromagnetic waves, which all obey the same wave equation.
In summary, if the wavelength of a wave in a uniform medium increases while the tension stays the same, its speed will decrease.
Learn more about sound waves here ;
https://brainly.com/question/1554319
#SPJ11
Masses M1 and M2 are connected to a system of strings and pulleys as shown below. The
strings are massless and inextensible, and the pulleys are massless and frictionless. 1) Find
the acceleration of M1. 2) What is the acceleration of M1 in the special cases when M1 <
After considering the given data we conclude that the acceleration of [tex]M_{1}[/tex]is [tex]a = (M2 - M1)/(M1 + M2) * g[/tex], and for the special case When M₁ << M₂, the acceleration is [tex]a \approx M2/(M1 + M2) * g[/tex], When M₂ << M₁, the acceleration is a ≈ g.
To evaluate the acceleration of M1 in the system of strings and pulleys, we can apply the following steps:
Draw free-body diagrams for M₁ and M₂, showing the forces acting on each mass.
Describe the equations of motion for each mass, applying Newton's second law [tex](F = ma)[/tex]and the fact that the tension in the string is the same on both sides of the pulley.
Evaluate the equations simultaneously to find the acceleration of M₁.
a) The acceleration of M₁ can be calculated using the following equation:
[tex]a = (M_2 - M_1)/(M_1 + M_2) * g[/tex]
Here,
M₁ and M₂ = masses of the blocks,
g = acceleration due to gravity.
b) When M₁ << M₂, the acceleration of M₁ can be approximated as:
[tex]a \approx M_2/(M_1 + M_2) * g[/tex]
This is because the mass of M₁ is negligible compared to M₂, so the acceleration of the system is determined mainly by the mass of M₂.
c) When M₂ << M₁, the acceleration of M₁ can be approximated as:
a ≈ g
This is because the mass of M₂ is negligible compared to M₁, so the acceleration of the system is determined mainly by the mass of M₁.
To learn more about acceleration
https://brainly.com/question/30595126
#SPJ4
The complete question is
Masses M_{1} and M_{2} are connected to a system of strings and pulleys as shown below. The strings are massless and inextensible, and the pulleys are massless and frictionless. 1) Find the acceleration of M_{1} .2) What is the acceleration of M_{1} in the special cases when M_{1} << M_{2} and when M_{2} << M_{1}
Describe and state what is within the little pictures in the cycle. Name each number by its picture.
The cycle you linked to is a representation of the water cycle. The pictures represent the different stages of the water cycle:
How to explain the informationThe numbers in the cycle represent the different stages of the water cycle. The number 1 represents the cloud, the number 2 represents the raindrops, the number 3 represents the river, the number 4 represents the ocean, the number 5 represents the aquifer, and the number 6 represents the plant.
The water cycle is a continuous process that moves water from the Earth's surface to the atmosphere and back again. The water cycle is essential for life on Earth, as it provides water for plants and animals to drink and for humans to use for drinking, irrigation, and other purposes.
Learn more about water cycle on
https://brainly.com/question/25796102
#SPJ1
In order to get an object moving, you must push harder on it than it pushes back on you. O True O False
The given statement "In order to get an object moving, you must push harder on it than it pushes back on you" is False.
According to Newton's third law of motion, for every action, there is an equal and opposite reaction. When you push an object, the object pushes back on you with an equal force in the opposite direction.
This means that the force you exert on the object and the force the object exerts on you are always equal in magnitude but opposite in direction.
The interaction between you and the object involves a pair of forces that are of the same strength.
Therefore, in order to get an object moving, you don't necessarily need to push harder on it than it pushes back on you.
Instead, you need to exert a force greater than the frictional forces or any other opposing forces acting on the object.
To know more about Newton's third law, refer here:
https://brainly.com/question/23772134#
#SPJ11
A system consists of three particles, each of mass 5.60 g, located at the corners of an equilateral triangle with sides of 32.0 cm (a) Calculate the gravitational potential energy of the system.
(b) Assume the particles are released simultaneously. Describe the subsequent motion of each. Will any collisions take place? Explain.
(a) The gravitational potential energy of the system can be calculated by summing up the potential energies between each pair of particles.
(b) When released simultaneously, the particles will undergo uniform circular motion around the center of mass of the system, and no collisions will occur.
(a)
The gravitational potential energy of the system can be calculated using the formula:
Potential energy = - G * (m1 * m2) / r
Where:
G is the gravitational constant (approximately 6.674 × 10^-11 N*m^2/kg^2)
m1 and m2 are the masses of the particles
r is the distance between the particles
In this case, we have three particles, so we need to calculate the potential energy between each pair and sum them up.
Let's denote the particles as A, B, and C. The distance between any two particles is equal to the length of one side of the equilateral triangle, which is 32.0 cm.
Potential energy between particles A and B:
U_AB = - G * (m1 * m2) / r
= - (6.674 × 10⁻¹¹N*m²kg²) * (5.60 g)² / (32.0 cm)
Similarly, potential energy between particles B and C:
U_BC = - G * (m1 * m2) / r
= - 6.674 × 10⁻¹¹N*m²kg²) * (5.60 g)² / (32.0 cm)
And potential energy between particles C and A:
U_CA = - G * (m1 * m2) / r
= -6.674 × 10⁻¹¹N*m²kg²) * (5.60 g)² / (32.0 cm)
To find the total potential energy of the system, we sum up the individual potential energies:
Potential energy of the system = U_AB + U_BC + U_CA
(b)
When the particles are released simultaneously, they will start moving under the influence of gravity.
Each particle will experience an attractive force towards the other two particles. The subsequent motion of each particle will be circular motion around the center of mass of the system.
Since the particles are equidistant and the forces acting on them are equal in magnitude, the resultant motion will be uniform circular motion. Each particle will move along a circle with the center at the center of mass of the system.
No collisions will take place because the particles are moving in circular paths around the center of mass and their paths do not intersect.
(a) The gravitational potential energy of the system can be calculated by summing up the potential energies between each pair of particles.
(b) When released simultaneously, the particles will undergo uniform circular motion around the center of mass of the system, and no collisions will occur.
To know more about collisions visit:
https://brainly.com/question/7221794
#SPJ11
given the line of gravity in the figure above, give the gravitational moment at the ankle, knee, hip, lumbar spine, and cervical spine.
Without the specific figure or image provided, it is not possible to determine the gravitational moments at the ankle, knee, hip, lumbar spine, and cervical spine accurately.
Gravitational moments depend on the individual's body position, weight distribution, and alignment, which cannot be assessed without visual information. Gravitational moments can be calculated by multiplying the weight of a body segment or joint by the perpendicular distance between the line of gravity and the joint or segment. However, these distances vary based on the body's posture, alignment, and individual characteristics. This analysis typically involves capturing data through motion capture systems, force plates, or other specialized equipment to measure joint angles, segment positions, and forces acting on the body. With these measurements, biomechanical software can calculate the gravitational moments at each joint or segment.
To learn more about spine, Click here:
https://brainly.com/question/17929330
#SPJ11
a 485 kg dragster accelerates from rest to a final speed of 125 m/s in 390m. during which it encounters an average friction force of 1100n. What is its average power output in watts and horsepower if this takes 7.30 s?
The average power output of the dragster is 58,767.12 watts (W) or 78.81 horsepower (hp).
To find the average power output of the dragster, we can use the formula:
Average Power = Work / Time
First, let's find the work done by the dragster. The work done can be calculated using the equation:
Work = Force × Distance × Cos(θ)
In this case, the force is the average friction force of 1100 N, the distance is 390 m, and the angle θ between the force and displacement is 0 degrees (cos(0) = 1). Therefore:
Work = 1100 N × 390 m × 1 = 429,000 J
Next, we can substitute the values into the formula for average power:
Average Power = Work / Time = 429,000 J / 7.30 s ≈ 58,767.12 W
To convert the average power to horsepower, we can use the conversion factor:
1 horsepower = 745.7 W
Therefore:
Average Power in horsepower = 58,767.12 W / 745.7 ≈ 78.81 hp
Hence, the average power output of the dragster is approximately 58,767.12 watts (W) or 78.81 horsepower (hp).
To learn more about horsepower click:
brainly.com/question/13259300
#SPJ1
in a single-slit diffraction experiment, a beam of monochromatic light of wavelength 573 nm is incident on a slit of width of 0.312 mm. if the distance between the slit and the screen is 2.30 m, what is the distance between the central axis and the first dark fringe (in mm)?
The distance between the central axis and the first dark fringe in the given single-slit diffraction experiment is approximately 4221.75 mm.
The distance between the central axis and the first dark fringe in a single-slit diffraction experiment can be determined using the formula:
y = (λL) / w
where:
y is the distance between the central axis and the first dark fringe,
λ is the wavelength of light,
L is the distance between the slit and the screen,
and w is the width of the slit.
λ = 573 nm
λ= 573 × 10⁻³m
w = 0.312 mm
w = 0.312 × 10⁻³ m
L = 2.30 m
Now, let's calculate the distance between the central axis and the first dark fringe (y):
y = (λL) / w
y = (573 × 10⁻⁹ m) × (2.30 m) / (0.312 × 10⁻³ m)
y = 4.22175 m
We need to convert this result to millimeters (mm) since the question asks for the answer in that unit:
y = 4.22175 m × 1000 mm/m
y ≈ 4221.75 mm
Therefore, the distance between the central axis and the first dark fringe is approximately 4221.75 mm.
In conclusion, the distance between the central axis and the first dark fringe in the given single-slit diffraction experiment is approximately 4221.75 mm.
To know more about diffraction visit:
https://brainly.com/question/28269867
#SPJ11