Answer:
24.9
Explanation:
-
what is the mass in grams of 0.250 mol of the common antacid colcium carbonate?
A. 25.0 g
B. 2.50 ×10-3
C. 4.00×102g
D. 4.00×1021g
E. 2.00×10-4 g
Answer:
b
Explanation:
i just had the same question
Silicon dioxide is a solid at room temperature and methanol is a liquid. What substance has the higher melting point?
Answer:
methanol because it is liquid at room temperature which means that it melts at a lower temperature
Silicon dioxide is a solid at room temperature and methanol is a liquid. Silicon dioxide has a higher melting point than methanol because silicon dioxide is solid, and with increasing temperature, it will melt.
What is a melting point?Melting point is that point or temperature at which the solid items are converted into liquid, and it changes their atoms and the atoms lose their compactness.
Here, two compounds are given, Silicon dioxide and methanol, the first one is solid at room temperature, so it will need more temperature to melt down and methanol is still liquid at room temperature, so its melting point is low.
Thus, methanol is a liquid while silicon dioxide is a solid at ambient temperature. Because silicon dioxide is a solid and melts at greater temperatures, it has a higher melting point than methanol.
To learn more about melting point, refer to the link:
https://brainly.com/question/20551307
#SPJ2
adjoa's gross salary for last month was ghs 4687.24. if ghs 421.78 was deducted from adjoa's salary pay,how much take home pay did adjoa earned this past month?
Since Ghs. 421.78 was deducted from Adjoa's salary pay, her take home pay is Ghs. 4265.46.
Given the following data:
Adjoa's gross salary = Ghs. 4687.24.Deduction = Ghs. 421.78Gross profit can be defined as the profit earned by a business after subtracting its cost of manufacturing and distributing goods from its total revenue (sales).
On a related note, gross salary is the amount of money earned by an individual before any deduction such as tax.
To find how much take home pay Adjoa earned this past month:
[tex]Take\;home = Gross\;salary - deduction\\\\Take\;home = 4687.24 - 421.78[/tex]
Take home = Ghs. 4265.46.
Read more: https://brainly.com/question/25273589
Biểu thức định luật Raoul là?
Answer: Định luật Raoult là một định luật hóa học vật lý, với ý nghĩa trong nhiệt động lực học. Được thành lập bởi nhà hóa học người Pháp François-Marie Raoult vào năm 1887, nó nói rằng áp suất một phần của mỗi thành phần của một hỗn hợp chất lỏng lý tưởng bằng với áp suất hơi của thành phần tinh khiết nhân với phần nốt ruồi của nó trong hỗn hợp. Kết quả là, việc giảm áp suất hơi tương đối của dung dịch pha loãng của chất tan không lây bằng với phần nốt ruồi của chất tan trong dung dịch.
Explanation: hope this helps :)
Acetone [(CH3)2C=O], a simple ketone is commonly used to make products like nail polish remover and paint remover. Draw a picture showing the orbitals involved in the and bonds including its lone pairs.
Carbon and oxygen atoms in (CH3)2C=O form sigma and pi bonds. The pi bonds are formed using unhybridized p orbitals.
Acetone (CH3)2C=O contains the carbonyl group (C=O). Carbon is bonded to oxygen via a double bond as shown in the orbital structure. The carbon atom is also bonded to two methyl groups.
The central carbon atom is sp2 hybridized as well as the oxygen atom in acetone. The pi bond is formed by the overlap of unhybridized p orbitals on both carbon and oxygen atoms. The sigma bonds are formed using the sp2 hybridized carbon atoms on carbon and oxygen.
Learn more: https://brainly.com/question/14569599
Determine the amount of grams present in 3.25x1024 atoms of Lithium.
What scientific term is a well-tested explanation for a set of observations or experimental results?
law
theory
method
conclusion
Answer:
b) theory
Explanation:
Answer:
theory or, conclusion is the answer
List the steps in naming covalent compounds.
1. Name the non-metal furthest to the left on the periodic table by its elemental name.
2. Name the other non-metal by its elemental name and an -ide ending.
3. Use the prefixes mono-, di-, tri-.... to indicate the number of that element in the molecule.
4. If mono is the first prefix, it is understood and not written
Answer:
Rules for naming simple covalent compounds:
1. Name the non-metal furthest to the left on the periodic table by its elemental name.
2. Name the other non-metal by its elemental name and an -ide ending.
3. Use the prefixes mono-, di-, tri-.... to indicate the number of that element in the molecule.
4. If mono is the first prefix, it is understood and not written
Examples:
N2O4 is called dinitrogen monoxideCO2 is called carbon dioxideCO is called carbon monoxideN2O is called dinitrogen monoxide. (It is also called nitrous oxide but that is another naming scheme.)CCl4 is called carbon tetrachlorideHere is a chart of those prefixes:
1 - mono
2 - di
3 - tri
4 - tetra
5 - penta
6 - hexa
7 - hepta
8 - octa
9 - nona
10 - deca
What differences between snow and sand
Answer:
difference is the temperature at which they melt. Snow melts at 0°C, whereas sand melts at about 1600°C! The temperature at which something melts is its melting point.how many number of atoms are present in 0.55moles of calcium
Explanation:
The warmer and less dense air near the ground rises during the day pulling more air through the valley floor. This gentle upslope wind known as a valley breeze. ... The cooler and denser air at higher elevations flows back down the slopes of the mountain and into the valley. This is called a mountain breeze.29-May-2017

https://www.weathernationtv.com › ...
Mountain and Valley Breezes - WeatherNation
Feedback
About featured snippets
Mountain breeze and valley breeze
Images










View all
Description
A mountain breeze and a valley breeze are two related, localized winds that occur one after the other on a daily cycle. They are not the same as anabatic and katabatic winds, which are larger and stronger. These winds are opposite from each other. Wikipedia
How many grams of potassium (K) contain 5.11 x 10^22 atoms of potassium?
The atomic mass of K is 39
from Avogadro's law
39g of K contains 6.02x10^23 atoms
therefore if
39=6.02x19^23
X=5.11×10^22
making X the subject of the formula
X= (5.11×10^22×39)÷6.02×10^23
X= 33g
The statement, that describes grams of potassium (K) contain 5.11 × [tex]10^{22}[/tex] atoms is "33.1 g."
What is an atom?An atom is a fundamental particle of matter that contains at least one proton.
1 mole will be of 6.022 × [tex]10^{23}[/tex] atoms
Then,
[tex]= 5.11*10^{22} \;atoms\;.\;\frac{1\;mol}{6.022*10^{23} \;atoms} \;.\;39.098\;g/mol\\\\= 33.171\;g[/tex]
≈ 33.1 g
As a result, 33.1 g of K contains 5.11 × [tex]10^{22}[/tex] atoms.
Hence, the correct option is 33.1 g.
Learn more about atoms here
https://brainly.com/question/19922822.
#SPJ2
How do ionic bonds differ from covalent bonds?
Determine whether the bonds in CCl4 and N2 are polar or non-polar. If the bond is polar, assign the partial positive and negative charges. Electronegativity values: C = 2.5, Cl= 3.0, N= 3.0
Refer to the attachment
According to the molecular geometry, bonds in carbon tetrachloride are polar and that in nitrogen are non polar.
What is molecular geometry?Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.
It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.
They provide information about geometry by taking into considerations the vibrational and rotational absorbance of a substance.Neutron and electron diffraction techniques provide information about the distance between nuclei and electron density.
Learn more about molecular geometry,here:
https://brainly.com/question/7558603
#SPJ2
eg
How many Mg atoms are there in 0.764 moles of Mg?
atoms
Answer:
1.135986935e+39
Answer:
[tex]\boxed {\boxed {\sf 4.60 \times 10^{23} \ atoms \ Mg}}[/tex]
Explanation:
We are asked to find how many atoms of magnesium are in 0.764 moles of magnesium.
We convert moles to atoms using Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this case, the particles are atoms of magnesium. So, there are 6.022 × 10²³ atoms of magnesium in 1 mole of magnesium.
Convert using dimensional analysis and set up a conversion factor using Avogadro's Number.
[tex]\frac{6.022 \times 10^{23} \ atoms \ Mg}{1 \ mol \ Mg}[/tex]
We are converting 0.764 moles of magnesium to atoms, so we multiply by this value.
[tex]0.764 \ mol \ Mg *\frac{6.022 \times 10^{23} \ atoms \ Mg}{1 \ mol \ Mg}[/tex]
The units of moles of magnesium cancel.
[tex]0.764 *\frac{6.022 \times 10^{23} \ atoms \ Mg}{1 }[/tex]
[tex]0.764 *6.022 \times 10^{23} \ atoms \ Mg[/tex]
[tex]4.600808 \times 10^{23} \ atoms \ Mg[/tex]
The original value of moles (0.764) has 3 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 0 in the thousandth place tells us to leave the 0 in the hundredth place.
[tex]4.60 \times 10^{23} \ atoms \ Mg[/tex]
0.764 moles of magnesium contains approximately 4.60 × 10²³ atoms of magnesium.
What happens when the two atoms are fairly close?
helppppppppppppppppppppppppppp
Answer:
It's also true
Explanation:
the answer is written in this question
I hope that helps
helppp! ill give brainliest
helpppppppppppppppppppppppppp
Answer:
B
Explanation:
Answer:
B
Explanation:
U can read the second part
What is the formula to calculate heat energy required to raise the temperature of any substance?
Answer:
[tex]\huge \dag \sf{Specific \: Heat}[/tex]
Specific Heat is the quantity of heat required to raise the temperature of one gram of a substance by one Celsius degree.Specific heat is a characteristic property that measures how much energy it takes to raise the temperature 1 gram of a material 1°C.
[tex]\huge\bold\red{Formula}[/tex]
mass x specific heat x change of temperature
Or,
c = Q / (mΔT)
[tex]\Large\textsf{Hope \: It \: Helped}[/tex]
[tex]{\blue{Formula}}[/tex]
The formula for specific heat is the amount of heat absorbed or released = mass x specific heat x change in temperature.
[tex]{\green{explanation}}[/tex]
Specific heat is the amount of heat required to raise one gram of any substance one degree Celsius or Kelvin.
Give one example of a question that science could test. Then, explain in your own words why it is an example of a scientific question. Please!
Answer:
Questions are an essential part of science. ... They state the final question in a way that can be answered by investigation or experiment. A good scientific question is: “What effect does the pH of water have on radish seed germination?” Good scientific questions are defined, measurable, and controllable.
What is the hydroxide concentration in a 0.20 M potassium acetate solution?
Answer:
Molar concentration of potassium hydroxide
= 0.27 Mol liter/approx
How would you make the following compounds from N-benzylbenzamide?
a)dibenzylamine
b)benzoic acid
c)benzyl alcohol
Answer:
B.
Explanation:
Oxalic acid is a diprotic acid with a first dissociation constant Ka1 = 0.0537 and a second dissociation constant Ka2 = 5.42×10-5. Consider all the species in equilibrium with each other in a 0.45 M solution. Note that the first acid dissociation constant is pretty large. This acid is almost a strong acid.
Part 1:
What is the concentration of undissociated oxalic acid in the 0.45 M oxalic acid solution?
Part 2:
What is the concentration of hydrogen oxalate?
Part 3:
What is the concentration of oxalate?
Part 4:
What is the concentration of hydronium?
Part 5:
What is the concentration of hydroxide?
Part 6:
What is the pH of the solution?
Answer:
50 points for this easy question
1. ¿Cuál de los factores se deben emplear para convertir: a. ¿Número de moles de cloro en número de moles de NaCl? b. Moles de sodio a moles de cloro C. Moles de cloro a moles de sodio. 2 Na + CI, - 2 Naci
Ayudaaa
Answer:
Número de moles de cloro en número de moles de NaCl
Explanation:
espero que si sea la correcta
Tin has the atomic number Sn (Z = 50).
(a). Give its electronic structure
(b). Is it one of the transition metals?
(c). Knowing that it loses its electrons in pairs and that the 4d subshell is not affected. What are the possible degrees of oxidation for this element?
Tin has electron configuration [Kr] 5s²4d¹⁰5p² and it is not a transition element because its outermost orbitals are 5s² 5p². It has oxidation states of +2 and +4.
The electron configuration of tin is [Kr] 5s²4d¹⁰5p². The electronic structure of an atom shows the arrangement of electrons in the atom of an element. The electrons are arranged in sub-shells.
Tin is not a transition metal because it has a completely filled d sub-shell and its outermost shell consists of ns, np orbitals.
Tin looses its electrons in pairs. Remember that the outermost orbitals are 5s² 5p². This means that tin can have two stable oxidation states, +2 and +4.
Learn more: https://brainly.com/question/10079361
does exercise increase, decrease or have no effect on the amount of carbon dioxide you exhale
Answer:
It increases the amount you exhale
Explanation:
The more you exercise and make your body work, the more oxygen you inhale which causes you to let out more carbon dioxide than if you were just resting.
It’s a science question
Why can't more than one variable be changed during an experiment?
O You need to make sure your results match your hypothesis.
O Changing two or more variables makes it difficult to find a cause and effect relationship.
O Change two or more variables would take longer.
O Changing two or more variables would make the experiment more precise.
Answer:
Changing two or more variables makes it difficult to find a cause and effect relationship.
HELPPPPPP
Calculate the frequency of light with a wavelength 559nm
Answer:
Refer to the attachment
What is a small description of a molecule
Answer:
molecule, a group of two or more atoms that form the smallest identifiable unit into which a pure substance can be divided and still retain the composition and chemical properties of that substance.
HELP SOON PLEASE THIS IS DUE TONIGHT! I WILL GIVE BRAINLIEST!
In an experiment where you use wires, a 9 volt battery, and a light bulb; what would be the best conductor to put on the ends of the wires? Please rate the following solution/liquids and their brightness from 1-5
-Tap water
-Baking soda
-Vinegar
-Coca Cola (or any soda, I guess)
Answer:
I would say baking powder maybe or you should try tap water
Answer:
1st one - tap water (ill go over them one by one to help you understand why)
Its honestly rather vinegar or tap water but if I would go with tap water however I could be wrong. I don't take your class lol
Step by step:
First, tap water includes a lot of ions and contaminants. As a result, tap water only contains ions capable of conducting electricity. As a result, tap water is an excellent electrical conductor.
2nd) Ammonia and baking soda are both weak bases. When weak electrolytes dissolve in water, the resulting solution has a low conductivity.
Third, because it releases H+ and CH3COO- ions, the mobility of these ions in the solution assists in electrical conduction. As a result, vinegar is a good electrical conductor.
4th) When dissolved in water, soda compounds (chemicals mostly containing sodium) include ions, and ions assist conduct electricity. As a result, it does not conduct because it lacks ions or charged particles.