Use the bubble sort to sort 6, 2, 3, 1, 5, 4, showing the lists obtained at each step as done in the lecture.

The probability that Devin, Erin, and Hana will be selected again is 1 / 10.

An adept approach to calculating the chance of Devin, Erin, and Hana being picked again is through the utilization of the combinations formula. This efficient formula calculates the total amount of possible ways 3 pupils can be selected from a group of 5:

C ( n, k ) = n ! / (k ! ( n - k ) ! )

C (5, 3) = 5 ! / (3 !( 5 - 3 ) ! )

= 120 / 12

= 10

The probability that Devin, Erin, and Hana will be selected again is:

=  Number of ways they can be selected / Total number of ways to select 3 students

= 1 / 10

Find out more on probability at https://brainly.com/question/30210045

#SPJ1

Answer:

The perimeter of a square field is the sum of the lengths of all four sides. Let s be the length of one side of the square. Then, the perimeter P is given by:

P = 4s

We know that the perimeter of the field is 1 1/2 miles, which is equal to 1.5 miles. So we can set up the equation:

4s = 1.5

Dividing both sides by 4, we get:

s = 0.375

Therefore, the length of one side of the square field is 0.375 miles or 1980 feet.

To prove that n! < n^n for all integers n ≥ 2 using generalized induction, we'll follow these steps: 1. Base case: Verify the inequality for the smallest value of n, which is n = 2.

2. Inductive step: Assume the inequality is true for some integer k ≥ 2, and then prove it for k + 1.
Base case (n = 2): 2! = 2 < 2^2 = 4, which is true.
Inductive step:
Assume that k! < k^k for some integer k ≥ 2.
Now, we need to prove that (k + 1)! < (k + 1)^(k + 1).

We can write (k + 1)! as (k + 1) * k! and use our assumption: (k + 1)! = (k + 1) * k! < (k + 1) * k^k, To show that (k + 1) * k^k < (k + 1)^(k + 1), we need to show that k^k < (k + 1)^, We know that k ≥ 2, so (k + 1) > k, and therefore (k + 1)^k > k^k.
Now, we have (k + 1)! < (k + 1) * k^k < (k + 1)^(k + 1).Thus, by generalized induction, n! < n^n for all integers n ≥ 2.

To know more about integers click here

brainly.com/question/10930045

#SPJ11

The required answer is a - bi, is also a root of the equation.

If a bi is a root of a polynomial equation with real coefficients, then its complex conjugate, a - bi, is also a root of the equation. This is because if a + bi is a root, then its complex conjugate a - bi must also be a root since the coefficients of the polynomial are real. a polynomial is an expression consisting of indeterminates (also called variables) and coefficients, that involves only the operations of addition, subtraction, multiplication, and positive-integer powers of variables. the coefficients of this polynomial, and are generally non-constant functions. A coefficient is a constant coefficient when it is a constant function. For avoiding confusion, the coefficient that is not attached to unknown functions and their derivative is generally called the constant term rather the constant coefficient. Polynomials are taught in algebra, which is a gateway course to all technical subjects. Mathematicians  use polynomials to solve problems.

A coefficient is a multiplicative factor in some term of a polynomial, a series, or an expression; it is usually a number, but may be any expression (including variables such as a, b and c).[1][better source needed] When the coefficients are themselves variables, they may also be called parameters. If a polynomial has only one term, it is called a "monomial". Monomial are also the building blocks of polynomials.

In a term, the multiplier out in front is called a "coefficient". The letter is called an "unknown" or a "variable", and the raised number after the letter is called an exponent. A polynomial is an algebraic expression in which the only arithmetic is addition, subtraction, multiplication and whole number exponentiation.

If a + bi is a root of a polynomial equation with real coefficients, then its complex conjugate, a - bi, is also a root of the equation.

To  know more about  polynomial equation. Click on the link.

https://brainly.com/question/30127172

#SPJ11

First, we can write the quadratic function in the form:

ax^2 + bx + c = a(x^2 + (b/a)x) + c

ax^2 + bx + c = a(x^2 + (b/a)x + (b/2a)^2 - (b/2a)^2) + c

ax^2 + bx + c = a[(x + (b/2a))^2 - (b/2a)^2] + c

minimum value of this expression occurs when (x + (b/2a))^2 = 0, which is only possible when x = -(b/2a)

ax^2 + bx + c = a(0 - (b/2a)^2) + c = -b^2/4a + c

the minimum value of the quadratic function is -(Δ/4a), which is equivalent to -b^2/4a when a > 0

the function is zero when x = 1, so we can write:

a(1)^2 + b(1) + c = 0

a + b + c = 0

ax^2 + bx + c = a(x - h)^2 + k, where h = -b/2a and k = -b^2/4a + c

the value of the function at x = 0 is 5, so we have:

a(0)^2 + b(0) + c = 5

c = 5

k = -b^2/4a + c

k = -(-a-5)^2/4a + 5

Simplifying this expression, we get:

k = (-a^2 - 10a - 25)/4a + 5

k = (-a^2 - 10a + 15)/4a

Since we know that k = -4, we can write:

-4 = (-a^2 - 10a + 15)/4a

Multiplying both sides by 4a, we get:

-16a = -a^2 - 10a + 15

Simplifying this equation, we get:

a^2 - 6a - 15 = 0

Factoring this quadratic equation, we get:

(a - 5)(a + 3) = 0

So, either a = 5 or a = -3. If a = 5, we can solve for b using the equation a + b

*IG:whis.sama_ent

We have shown that the null geodesics in a 3-space (x*)-(x, y, z) and line element with coordinates are given by: [tex]ds^2 = I(dx)^2 + 2ldxdy + 2mdxdz + 2m'dydz + ndy^2 + n'dz^2[/tex]= 0. where I, l', m, m', n, n' are arbitrary constants satisfying [tex]12m^2 < 2I[/tex]n.

Null geodesics in a 3-space (x*)-(x, y, z) and line element with coordinates are given by:

[tex]ds^2 = I(dx)^2 + 2ldxdy + 2mdxdz + 2m'dydz + ndy^2 + n'dz^2 = 0[/tex]

where I, l', m, m', n, n' are arbitrary constants satisfying[tex]12m^2 < 2In[/tex].

To prove this, we need to show that any solution to the above equation is a null geodesic, and any null geodesic can be expressed in this form.

Let's first assume that we have a solution to the above equation. We can write it in terms of a parameter u, such that:

x = x0 + Au
y = y0 + Bu
z = z0 + Cu

where A, B, and C are constants. Substituting these expressions into the line element equation, we get:

[tex]I(A^2)u^2 + 2lAuB + 2mAuC + 2m'BuC + n(B^2)u^2 + n'(C^2)u^2 = 0[/tex]

Since this equation holds for any value of u, each term must be zero. Therefore, we get six equations:

[tex]I(A^2) + 2lAB + 2mAC = 0[/tex]

[/tex]2m'BC + n(B^2) = 0[/tex]

[/tex]n'(C^2) = 0[/tex]

From the last equation, we get either C = 0 or n' = 0. If n' = 0, then the equation reduces to:

[/tex]I(A^2) + 2lAB + 2mAC + n(B^2) = 0[/tex]

which is the equation of a null geodesic in this 3-space. If C = 0, then we can write the line element equation as:

[/tex]I(dx)^2 + 2ldxdy + 2m'dydz + ndy^2 = 0[/tex]

which is also the equation of a null geodesic.

Now, let's assume we have a null geodesic in this 3-space. We can write it in the form:

x = x0 + Au
y = y0 + Bu
z = z0 + Cu

where A, B, and C are constants. Substituting these expressions into the line element equation, we get:

[/tex]I(A^2) + 2lAB + 2mAC + n(B^2) + 2m'BC + n'(C^2) = 0[/tex]

Since the geodesic is null, ds^2 = 0. Therefore, we get:

[/tex]ds^2 = I(dx)^2 + 2ldxdy + 2mdxdz + 2m'dydz + ndy^2 + n'dz^2 = 0[/tex]

which is the same as the line element equation we started with. Therefore, any null geodesic in this 3-space can be expressed in the form given by the equation above.

In conclusion, we have shown that the null geodesics in a 3-space (x*)-(x, y, z) and line element with coordinates are given by:

[/tex]ds^2 = I(dx)^2 + 2ldxdy + 2mdxdz + 2m'dydz + ndy^2 + n'dz^2 = 0[/tex]

where I, l', m, m', n, n' are arbitrary constants satisfying [/tex]12m^2 < 2In.[/tex]

To learn more about expression visit;

brainly.com/question/14083225

#SPJ11

We requires a positive volume, we can conclude that there is no minimum volume subject to the given constraint

Let r be the radius of the can, and let h be its height. We want to minimize the volume V = πr^2h subject to the constraint A = 2πrh + 2π[tex]r^2[/tex] = 54.

We can solve for h in terms of r using the constraint equation:

2πrh + 2π[tex]r^2[/tex] = 54

h = (54 - 2π[tex]r^2[/tex]) / (2πr)

Substituting this expression for h into the expression for V, we get:

V = π[tex]r^2[/tex] [(54 - 2π[tex]r^2[/tex]) / (2πr)]

V = (27/π) [tex]r^2[/tex] (54/π - [tex]r^2[/tex])

To find the minimum value of V, we can differentiate it with respect to r and set the result equal to zero:

dV/dr = (27/π) r (108/π - 3[tex]r^2[/tex]) = 0

This equation has solutions r = 0 (which corresponds to a minimum volume of 0) and r = sqrt(36/π) = 2.7247 (rounded to four decimal places). To check that this value gives a minimum, we can check the second derivative:

[tex]d^2V/dr^2[/tex] = (27/π) (108/π - 9r^2)

At r = 2.7247, we have [tex]d^2V/dr^2[/tex] = -22.37, which is negative, so this is a local maximum. Therefore, the only critical point that gives a minimum is r = 0, which corresponds to a zero volume.

Since the problem requires a positive volume, we can conclude that there is no minimum volume subject to the given constraint.

Learn more about radius

brainly.com/question/13449316

#SPJ11

The volume of the cylinder is 2797.74 cubic meters whose radius is 9m and height is 11m

Volume is defined as the space occupied within the boundaries of an object in three-dimensional space.

Given that radius is 9m and height is 11m

The formula for volume is πr²h

Plug in the values of radius and height

Volume = π(9)²(11)

=3.14×81×11

=2797.74 cubic meters

Hence, the volume of the cylinder is 2797.74 cubic meters whose radius is 9m and height is 11m

To learn more on Volume click:

https://brainly.com/question/13798973

#SPJ3

the size of the bacterial population after 4 hours would be approximately 515396.08 bacteria.

The doubling period of a bacterial population is the amount of time it takes for the population to double in size. In this case, the doubling period is 10 minutes. This means that every 10 minutes, the bacterial population will double in size.

At time t = 120 minutes, the bacterial population was 80000. We can use this information to find the initial population at time t = 0. We can do this by working backward from the known population at t = 120 minutes.

If the doubling period is 10 minutes, then in 120 minutes (12 doubling periods), the population would have doubled 12 times. Therefore, the initial population at t = 0 must have been 80000 divided by 2 raised to the power of 12:

Initial population[tex]= \frac{80000} { 2^{12}}[/tex]
Initial population = 1.953125

So, the initial population at t = 0 was approximately 1.95 bacteria.

To find the size of the bacterial population after 4 hours (240 minutes), we can use the doubling period of 10 minutes again.

In 240 minutes (24 doubling periods), the population would have doubled 24 times. Therefore, the size of the bacterial population after 4 hours would be:

Population after 4 hours = initial population x[tex]2^{24}[/tex]
Population after 4 hours =[tex]1.953125 *2^{24}[/tex]Population after 4 hours = 515396.075

So, the size of the bacterial population after 4 hours would be approximately 515396.08 bacteria.

learn more about the initial population

https://brainly.com/question/24073375

#SPJ11

a) To find the equilibrium points, we set x' = 0 and solve for x:

x' = x - x^2 = 0

x(1 - x) = 0

So x = 0 or x = 1.

To find the equilibrium points, we set the derivative x' equal to zero and solve for x. In this case, x' = x - x^2 = 0. By factoring out x, we obtain x(1 - x) = 0, which leads to two possible equilibrium points: x = 0 and x = 1.

To classify the stability of these points, we analyze the sign of x' near each point. For x = 0, x' = x = 0, indicating a neutrally stable equilibrium. For x = 1, x' = -x^2 < 0 when x is slightly greater than 1, implying a stable equilibrium. These classifications indicate how the system behaves around each equilibrium point.

To classify the equilibrium points, we find the sign of x' near each equilibrium point.

For x = 0, we have x' = x = 0, so the equilibrium point is neutrally stable. For x = 1, we have x' = -x^2 < 0 when x is slightly greater than 1, so the equilibrium point is stable.

To know more about equilibrium points refer here:

https://brainly.com/question/1527528

#SPJ11

The numerical value of the margin of error for a 95% confidence interval is approximately 1.88 μg/l.

The margin of error for a confidence interval is half of the width of the interval.

The width of the interval is the difference between the upper and lower bounds of the interval. The calculated value of width of the interval is

11.98 μg/l - 8.22 μg/l = 3.76 μg/l

Therefore, the margin of error is half of this width

3.76 μg/l / 2 = 1.88 μg/l

Rounding to two decimal places, the margin of error is approximately 1.88 μg/l.

To know more about confidence interval:

https://brainly.com/question/29680703

#SPJ4

The apothem of a regular pentagon with a side length of 6 is approximately 4.37614 units.

Given the side length of a regular hexagon, we may use one of these formulas to get its apothem. Consider a normal hexagon with 7 inches of side length as an example.

We can use the following formula to determine the apothem of a regular pentagon with six sides:

apothem=(side length)/(2*tan(pi/number of sides))

Five sides make up a normal pentagon, and pi is about 3.14159. When these values and the 6 side length are entered into the formula, we obtain:

apothem = (6) / (2 * tan(pi / 5))

apothem = (6) / (2 * tan(3.14159 / 5))

apothem = (6) / (2 * 0.68819)

apothem = 4.37614

To know more about pentagon visit:-

https://brainly.com/question/17054992

#SPJ1

Make sure to label your axis and include important points such as the corner frequency and gain crossover frequency.

To join line segments for a Bode plot, you first need to have the transfer function of the system you are analyzing. Then, you can break down the transfer function into smaller segments, each representing a different frequency range. You can then plot each segment on the Bode plot and connect them together to form a continuous curve. This will give you a visual representation of the system's frequency response. Make sure to label your axis and include important points such as the corner frequency and gain crossover frequency.

learn more about Bode plot

https://brainly.com/question/31322290

#SPJ11

Make sure to label your axis and include important points such as the corner frequency and gain crossover frequency.

To join line segments for a Bode plot, you first need to have the transfer function of the system you are analyzing. Then, you can break down the transfer function into smaller segments, each representing a different frequency range. You can then plot each segment on the Bode plot and connect them together to form a continuous curve. This will give you a visual representation of the system's frequency response. Make sure to label your axis and include important points such as the corner frequency and gain crossover frequency.

learn more about Bode plot

https://brainly.com/question/31322290

#SPJ11

The area of a rhombus with the given diagonals measure is 48 square units.

Given that, the length of two diagonals are 8 units and 12 units.

We know that, Area of rhombus = 1/2 × (product of the lengths of the diagonals)

Here, Area = 1/2 × 8 × 12

= 48 square units

Therefore, the area of a rhombus with the given diagonals measure is 48 square units.

Learn more about the area here:

https://brainly.com/question/27683633.

#SPJ1

The probability density function of the random variable Y defined by Y = log X is [tex]f_Y(y) = e^{(-e^y)} e^y[/tex] for y ∈ R, and 0 otherwise.

To compute the probability density function (PDF) of the random variable Y, defined by Y = log X, where X is an exponential random variable with parameter λ = 1, follow these steps:

1. First, identify the PDF of the exponential random variable X with λ = 1.

The PDF is given by:
[tex]f_X(x) = \lambda * e^{(-\lambda x)} = e^{(-x)}[/tex] for x ≥ 0, and 0 otherwise.

2. Next, consider the transformation Y = log X.

To find the inverse transformation, take the exponent of both sides:
[tex]X = e^Y[/tex].

3. Now, we'll find the Jacobian of the inverse transformation.

The Jacobian is the derivative of X with respect to Y:
[tex]dX/dY = d(e^Y)/dY = e^Y[/tex].

4. Finally, we'll compute the PDF of the random variable Y using the change of variables formula:
[tex]f_Y(y) = f_X(x) * |dX/dY|[/tex], evaluated at [tex]x = e^y[/tex].

Plugging in the PDF of X and the Jacobian, we get:
[tex]f_Y(y) = e^{(-e^y)} e^y[/tex] for y ∈ R, and 0 otherwise.

So, the probability density function of the random variable Y defined by Y = log X, where X is an exponential random variable with parameter λ = 1, is [tex]f_Y(y) = e^{(-e^y)} e^y[/tex] for y ∈ R, and 0 otherwise.

Learn more about the probability density function:

https://brainly.com/question/30403935

#SPJ11

Answer: 3055

Step-by-step explanation:

47 x 65

Separate the 40 and the 7, and the 60 and the 5. You get 40 from the 4 in 47 because 4 is in the tens place, you get 60 from 65 for the same reason. Then you want to multiply 40 x 60, which can also be 6 x 4, then add two 0's. So for this we have 2400. Then multiply the 40 by the 5, this can be 4 x 5 then add a 0. Now for this we have 200. Now you want to multiply the 7 by the 60. 7 x 6 = 42, so add a 0.

7 x 60 = 420

Now, multiply the 7 by the 5, this is 35. Lastly, you want to add all the products together.

35 + 420 + 200 + 2400

= 3055

A Type II error in this setting is the mean amount of [tex]CO_2[/tex] emitted by the new fuel is actually lower than 89 kg but they fail to conclude it is lower than 8.9 kg. Option B is right choice.

In hypothesis testing, a Type II error occurs when we fail to reject a false null hypothesis. In this case, the null hypothesis is that the mean amount of  [tex]CO_2[/tex] emitted by the new gasoline is 8.9 kg, while the alternative hypothesis is that the mean is less than 8.9 kg.

Therefore, a Type II error would occur if the mean amount of [tex]CO_2[/tex] emitted by the new fuel is actually lower than 8.9 kg, but the test fails to reject the null hypothesis that the mean is 8.9 kg.

This means that the test fails to detect the difference in CO2 emissions between the new fuel and the standard fuel, even though the new fuel has lower  [tex]CO_2[/tex] emissions.

Option B is the correct answer because it describes this scenario - the mean amount of  [tex]CO_2[/tex] emitted by the new fuel is actually lower than 8.9 kg but they fail to conclude it is lower than 8.9 kg. This is a Type II error because the test fails to detect a true difference between the mean    [tex]CO_2[/tex] emissions of the new fuel and the standard fuel.

For similar question on Type II error

https://brainly.com/question/30403884

#SPJ11

The missing option are

a.The mean amount of CO2 emitted by the new fuel is actually 8.9 kg but they conclude it is lower than 8 9 kg

b. The mean amount of CO2 emitted by the new fuel is actually lower than 89 kg but they fail to conclude it is lower than 8.9 kg

c. The mean amount of CO2 emitted by the new fuel is actually 8.9 kg and they fail to conclude it is lower than 8.9 kg

d. The mean amount of CO2 emitted by the new fuel is actually lower than 8 9 kg and they conclude it is lower than 8 9 kg

The Maclaurin series for the given function can be obtained using the formula for the Maclaurin series and the expression given in the table.

To obtain the Maclaurin series for the given function, we need to use the formula for the Maclaurin series, which is:

f(x) = ∑ (n=0 to infinity) [ f^(n)(0) / n! ] * x^n

where f^(n)(0) is the nth derivative of f(x) evaluated at x = 0.

Using the formula given in the table, we have:

f(x) = ∑ (n=0 to infinity) [ (1! * 2! * 3! * ... * (2n-1)) / ((2n)! * (2n+1)) ] * x^(2n+1)

Simplifying the expression, we have:

f(x) = ∑ (n=0 to infinity) [ (-1)^n * (2n)! / (2^(2n+1) * (n!)^2 * (2n+1)) ] * x^(2n+1)

Therefore, the Maclaurin series for the given function is:

f(x) = x - (1/3)x^3 + (1/5)x^5 - (1/7)x^7 + ...

Learn more about the Maclaurin series :

https://brainly.com/question/31383907

#SPJ11

The cost of wrapping all the 3 boxes is $240.

Given that a shoe box of dimension 14 in × 8 in × 4 in, has been covered by a paper wrap before shipping, we need to find the cost of covering 3 boxes if cost of wrapping is $0.2 per in².

To find the same we will find the total surface area of the box and then multiply it by 0.2 then by 3 to find the cost of wrapping all the 3 boxes.

The total surface area of a box = (2LW + 2WH + 2LH)

Where,

length of box = L

height of box = H

width of box = W

Therefore,

Surface area of 3 boxes = 3×(2LW + 2WH + 2LH) sq.in.

= 3 × 2 × (14×4 + 14×8 + 8×4)

= 6 × (56 + 112 + 32)

= 6 × 200

= 1200 in²

Since, the cost of packing one sq. in. = $0.02

Therefore,

The cost of packing 3 boxes = 1200 × 0.02 dollars = $240

Hence, the cost of wrapping all the 3 boxes is $240.

Learn more about total surface area, click;

https://brainly.com/question/8419462

#SPJ1

Using a t-distribution table, here with 46 degrees of freedom (n-1), the critical value for a two-tailed test with a level of significance of α = 0.10 is ±2.575. Therefore, we reject H0 if the standardized test statistic is greater than 2.575 or less than -2.575. The correct answer is D. Reject H0 if the standardized test statistic is greater than 2.575 or less than -2.575.

To determine whether to reject H0, we need to calculate the standardized test statistic using the formula (sample mean - hypothesized mean) / (standard deviation / square root of sample size). Since the null hypothesis is that μ = 3.5, the sample mean and standard deviation must be used to calculate the standardized test statistic.
Assuming a normal distribution, with a sample size of n=47 and a level of significance of α = 0.10, we can use a two-tailed test with a critical value of ±1.645. However, since we are testing for μ ≠ 3.5, this is a two-tailed test, and we need to use a critical value that accounts for both tails.

Learn more about t-distribution here, https://brainly.com/question/17469144

#SPJ11

The first five terms of the sequence are a₁ = 3, a₂ = 11, a₃ = 35, a₄ = 107 and a₅ = 323

A recursive formula, also known as a recurrence relation, is a formula that defines a sequence in terms of its previous terms. It is a way of defining a sequence recursively, by specifying the relationship between the current term and the previous terms of the sequence.

To find the first five terms of the sequence, we can apply the recursive formula

a₁ = 3

aₙ = 3aₙ₋₁ + 2 for n > 1

Using this formula, we can find each term in the sequence by substituting the previous term into the formula.

a₂ = 3a₁ + 2 = 3(3) + 2 = 11

a₃ = 3a₂ + 2 = 3(11) + 2 = 35

a₄ = 3a₃ + 2 = 3(35) + 2 = 107

a₅ = 3a₄ + 2 = 3(107) + 2 = 323

Learn more about recursive formula here

brainly.com/question/8972906

#SPJ4

The given question is incomplete, the complete question is:

Write the first five terms of the sequence where a₁ =3, aₙ =3aₙ₋₁ +2, For all n > 1

The solution to the IVP is:

[tex]y(x) = (43/20)e^{(6x)} - (27/20)e^{(-x)} - (63/20) + (47/20)e^{(x)][/tex]

The given differential equation is:

[tex]d^2y/dx^2 - 5dy/dx - 6y = 0[/tex]

The auxiliary equation is:

[tex]r^2 - 5r - 6 = 0[/tex]

This can be factored as:

(r - 6)(r + 1) = 0

So, the roots are r = 6 and r = -1.

The two fundamental solutions are:

[tex]y1(x) = e^{(6x)} and y2(x) = e^{(-x)}[/tex]

To solve the initial value problem (IVP), we need to find the constants c1 and c2 such that the general solution satisfies the initial conditions:

y(0) = -7 and y'(0) = 7

The general solution is:

[tex]y(x) = c1e^{(6x)} + c2e^{(-x)}[/tex]

Taking the derivative with respect to x, we get:

[tex]y'(x) = 6c1e^{(6x)}- c2e^{(-x)}[/tex]

Using the initial condition y(0) = -7, we get:

c1 + c2 = -7

Using the initial condition y'(0) = 7, we get:

6c1 - c2 = 7

Solving these equations simultaneously, we get:

[tex]c1 = (43/20)e^{(-6x)} - (27/20)e^{(x)}[/tex]

[tex]c2 = -(63/20)e^{(-6x)} + (47/20)e^{(x)}[/tex]

Therefore, the solution to the IVP is:

[tex]y(x) = (43/20)e^{(6x)} - (27/20)e^{(-x)} - (63/20) + (47/20)e^{(x)][/tex]

Simplifying, we get:

[tex]y(x) = (43/20)e^(6x) + (7/20)e^{(-x)} - (63/20)[/tex]

Learn more about auxiliary equation

brainly.com/question/18521479

#SPJ11

Answer:

76.93 cm²

Step-by-step explanation:

Area of semi-circle = (1/2) · π · r²

r = 7 cm

π = 3.14

Let's solve

(1/2) · 3.14 · 7² = 76.93 cm²

So, the area of the semi-circle is 76.93 cm²

The pH during the titration of 20.44 mL of 0.26 M HBr with 0.14 M KOH after 10.97 mL of the base have been added is approximately 0.4001.

To calculate the pH during the titration of 20.44 mL of 0.26 M HBr with 0.14 M KOH after 10.97 mL of the base have been added, we need to use the following equation:

n(HBr) x V(HBr) x M(HBr) = n(KOH) x V(KOH) x M(KOH)

where n is the number of moles, V is the volume, and M is the molarity.

First, we need to calculate the number of moles of HBr in the initial solution:

n(HBr) = M(HBr) x V(HBr)
n(HBr) = 0.26 mol/L x 0.02044 L
n(HBr) = 0.0053144 mol

Next, we need to calculate the number of moles of KOH added:

n(KOH) = M(KOH) x V(KOH)
n(KOH) = 0.14 mol/L x 0.01097 L
n(KOH) = 0.0015358 mol

Since KOH is a strong base and HBr is a strong acid, they will react in a 1:1 ratio, so the number of moles of HBr that remain after the addition of KOH will be:

n(HBr) remaining = n(HBr) - n(KOH)
n(HBr) remaining = 0.0053144 mol - 0.0015358 mol
n(HBr) remaining = 0.0037786 mol

Now we can calculate the volume of the remaining HBr solution:

V(HBr) remaining = V(HBr) - V(KOH)
V(HBr) remaining = 0.02044 L - 0.01097 L
V(HBr) remaining = 0.00947 L

Finally, we can calculate the new concentration of the HBr solution:

M(HBr) = n(HBr) remaining / V(HBr) remaining
M(HBr) = 0.0037786 mol / 0.00947 L
M(HBr) = 0.3988 M

To calculate the pH, we need to use the following equation:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions.

Since HBr is a strong acid, it dissociates completely in water to form H+ and Br- ions, so the concentration of H+ ions is equal to the concentration of the remaining HBr solution:

[H+] = M(HBr)
[H+] = 0.3988 M

pH = -log(0.3988)
pH = 0.4001

Learn more about chemistry here: brainly.com/question/13428382

#SPJ11

If Coy needs to buy more than 8 pairs of socks, shopping at Sports Superstore will be cheaper than shopping at Sport 'n Stuff.

An inequality is a comparison between two numbers or expressions that are not equal to one another. Indicating which value is less or greater than the other, or simply different, are symbols like, >,,, or.

Let's call the number of pairs of socks Coy needs to buy "x".

If he shops at Sport 'n Stuff, the cost will be:

Cost at Sport 'n Stuff = $22 (for cleats) + $4x (for socks)

If he shops at Sports Superstore, the cost will be:

Cost at Sports Superstore = $28 (for cleats) + $3.25x (for socks)

We want to find the value of "x" for which shopping at Sports Superstore is cheaper than shopping at Sport 'n Stuff. In other words, we want:

Cost at Sports Superstore < Cost at Sport 'n Stuff

Substituting the expressions we found earlier, we get:

$28 + $3.25x < $22 + $4x

Simplifying and solving for x, we get:

$28 - $22 < $4x - $3.25x

$6 < $0.75x

8 < x

Therefore, If Coy needs to buy more than 8 pairs of socks, shopping at Sports Superstore will be cheaper than shopping at Sport 'n Stuff.

Learn more about Sports on:

https://brainly.com/question/30032950

#SPJ1

According to the property of parallelogram, Angle ABC is right angle.

Given:In □ABCD is quadrilateral

AB=DC andAD=BC

To prove: Angle ABC is right angle

Proof: in △ABC and △ADC

AD=BC [Given]

AB=DC [Given]

AC=AC [Common side]

thus, By SSS property △ADC≅△ACB

∴∠DAC=∠DCA

∴AB∣∣DC

In△ABD and △DCB

DB=DB [Common side]

AD=BC [Given]

AB=DC [Given]

Thus, △ABD≅△DCB

AD∣∣BC

Since AB∣∣DC and AD∣∣BC, △ABCD is parallelogram

Therefore, Angle ABC is right angle.

Learn more about a right angle;

https://brainly.com/question/7116550

#SPJ1

The critical points of the function f(x) = -6 sin(x) over the interval [0, 2π] can be found by determining where the derivative f'(x) equals zero or is undefined.

Step 1: Find the derivative f'(x) using the chain rule. For -6 sin(x), the derivative is f'(x) = -6 cos(x).

Step 2: Set f'(x) = 0 and solve for x. In this case, we have -6 cos(x) = 0. Dividing by -6 gives cos(x) = 0.

Step 3: Determine the values of x in the interval [0, 2π] where cos(x) = 0. These values are x = π/2 and x = 3π/2.

Therefore, the critical points of the function f(x) = -6 sin(x) over the interval [0, 2π] are x = π/2 and x = 3π/2.

To know more about critical points click on below link:

https://brainly.com/question/31017064#

#SPJ11