what current flows when a 45 v potential difference is imposed across a 1.8 kω resistor?

In the film American Beauty, capitalism and patriarchy negatively impact the characters, especially the main character, Lester Burnham. Similarly, today's media perpetuates harmful gender stereotypes and sends negative messages to young people about their roles and expectations in society.

The film American Beauty explores the negative impact of capitalism and patriarchy on its characters, especially the main character Lester Burnham. Lester, who is stuck in his corporate job and loveless marriage, tries to reject the values of capitalism and patriarchy, but his attempts lead to his downfall. The film depicts how these systems can restrict individuals and lead to feelings of entrapment, dissatisfaction, and despair.

Today's media continues to project images that reinforce gender inequality and promote harmful stereotypes. Women are often portrayed as sexual objects for male consumption, while men are portrayed as dominant and aggressive. These images send harmful messages to young people about their roles and expectations in society. Young people may internalize these messages and believe that certain behaviors or attitudes are acceptable or expected based on their gender. This perpetuates gender inequality and reinforces harmful gender norms and stereotypes. Media creators should consider the impact of their images on young people and work towards promoting positive and diverse representations of gender in media.

Therefore, Capitalism and patriarchy have a bad effect on the characters in the movie American Beauty, particularly the lead character Lester Burnham. Similarly to this, the media of today reinforces damaging gender stereotypes and conveys to young people unfavorable messages about their social duties and expectations.

To learn more about extreme things people do in the name of beauty today click:

brainly.com/question/13573326

#SPJ1

The wavelength of the matter wave associated with an electron in the n=11 electronic orbit in the hydrogen atom is 464 nm.

The wavelength of the matter wave associated with an electron in the n=11 electronic orbit in the hydrogen atom can be calculated using the de Broglie equation:

wavelength = h/p

where h is Planck's constant and p is the momentum of the electron. The momentum of the electron can be calculated using the formula:

p = mv

where m is the mass of the electron and v is its velocity.

Since we know that the electron is in the n=11 electronic orbit in the hydrogen atom, we can use the formula for calculating the radius of the electronic orbit:

r = n^2*(h^2/4*pi^2*m*e^2)

where n is the quantum number, m is the mass of the electron, and e is the charge of the electron.

Substituting the given values, we get:

r = 11^2*(h^2/4*pi^2*m*e^2)

Now, we can calculate the velocity of the electron using the formula:

v = sqrt((ke^2)/r)

where k is the Coulomb's constant and e is the charge of the electron.

Substituting the given values, we get:

v = sqrt((9*10^9*1.6*10^-19)^2/(11^2*(6.63*10^-34)^2*9.11*10^-31))

v = 1.57*10^6 m/s

Finally, we can calculate the momentum of the electron:

p = mv

p = (9.11*10^-31)*(1.57*10^6)

p = 1.43*10^-24 kg*m/s

Substituting the calculated momentum into the de Broglie equation, we get:

wavelength = h/p

wavelength = (6.63*10^-34)/(1.43*10^-24)

wavelength = 4.64*10^-10 m

Converting the wavelength from meters to nanometers, we get:

wavelength = 464 nm

Know more about de Broglie equation here:

https://brainly.com/question/17295250

#SPJ11

The reason why the minimum T2 occurs when T2 and T1 are perpendicular to each other in the boat problem is that the force T2 acts as a component of the net force acting on the boat, and when it is perpendicular to T1, it is the smallest possible value that can counteract the force of the current.

On the other hand, in the tank problem, the minimum P occurs when P and R are perpendicular to each other because P is acting as a support force against the weight of the tank, and when it is perpendicular to R (the normal force of the floor), it is the smallest possible value that can support the weight of the tank.
To determine whether to find minimum or maximum values for the forces in these types of problems, you should look for the point where the system is in equilibrium, where the net force and net torque acting on the system are both zero. In the boat problem, you would be looking for the minimum T2 that can balance the force of the current, while in the tank problem, you would be looking for the minimum P that can support the weight of the tank.

learn more about force here:

https://brainly.com/question/13191643

#SPJ11

a. When the switch is disconnected from point b and connected to point a, the capacitor will begin to charge. As a result, the voltage across the capacitor will increase exponentially with time. This is due to the charging process, which follows an exponential curve as the capacitor charges through the resistor.

When the switch is disconnected from point b and connected to point a, the capacitor will begin to charge. Initially, the capacitor has no charge, so it acts as a short circuit and allows the current to flow through the resistor.

As the capacitor charges, it starts to act as an open circuit, and the current flow decreases until it reaches zero when the capacitor is fully charged.

The voltage across the capacitor during this charging process increases exponentially with time, following the formula:
V(t) = [tex]V_0[/tex](1 - [tex]e^{(-t/RC)[/tex]),
where [tex]V_0[/tex] is the initial voltage,
t is the time elapsed since the switch was flipped,
R is the resistance of the resistor, and
C is the capacitance of the capacitor.

This exponential increase in voltage occurs because the rate of charging is proportional to the difference between the initial voltage and the maximum voltage that the capacitor can reach. As the capacitor charges and its voltage approaches the maximum voltage, the rate of charging decreases, resulting in the exponential curve.

Therefore, the voltage across the capacitor will increase exponentially with time when the switch is disconnected from point b and connected to point a.

To know more about "Voltage" refer here:

https://brainly.com/question/30764403#

#SPJ11

In the specific charge of the electron lab, coulomb electrical forces between electrons would have a significant effect on the beam

. As electrons are negatively charged particles, they would repel each other due to the coulombic force. This would cause the beam to spread out and become less focused as the electrons try to move away from each other. The greater the number of electrons present, the stronger the repulsive force would be, and the more spread out the beam would become.

Therefore, it is important to carefully control the number of electrons in the beam to minimize the effects of coulombic repulsion and maintain a focused beam.

Learn more about electron here:

https://brainly.com/question/1255220

#SPJ11

To solve this problem, we can use the conservation of angular momentum. The initial angular momentum (L_initial) is equal to the final angular momentum (L_final).

L_initial = L_final

The angular momentum is given by the product of the moment of inertia (I) and angular speed (w). So,

I0 * w0 = (1/3)I0 * w_final

Now, we can solve for w_final:

w_final = (I0 * w0) / ((1/3)I0)

w_final = 3 * w0

So, the answer is:

E.) 3w0

The correct answer is **D.) sqrt(3)w0**. This is because the law of conservation of angular momentum states that the initial angular momentum must be equal to the final angular momentum. The initial angular momentum is I0w0 and the final angular momentum is (1/3)I0 * w, where w is the final angular speed. Solving for w, we get w = (I0w0) / ((1/3)I0) = 3w0. Taking the square root of both sides, we get sqrt(w) = sqrt(3w0) or w = sqrt(3)w0.

The amount of force needed is 42.6 kN. 8.43 meters is the value of the necessary distance from the location.

The force is zero in the horizontal direction.

42.6 kN is the force in the y direction.

The force that results from this is 42.6 kN.

8.43 meters is the value of the necessary distance.

The overall force operating on the item or body as well as the direction in which the body is moving are referred to as the resultant force. When the object is stationary or moving at the same speed as it, there is no consequent force.

To learn more about resultant force visit:

brainly.com/question/16380983

#SPJ1

Take that w0 = 4.8 kN/m. The horizontal distance between O and w0 is 3 m and the shorter distance is 1.5 m.

a) Replace the loading by a single resultant force and determine its magnitude.

b) Specify the location of the force measured from point O. Assume that the location of the equivalent resultant force is not necessary on the beam.

Answer:

300 N

Explanation:

We can use the principle of Pascal's law to solve this problem. According to this law, pressure applied to a confined fluid is transmitted undiminished to every part of the fluid and to the walls of the container.

In this case, the fluid is confined in two cylinders with pistons of different sizes. The force applied on the larger piston is transmitted through the fluid and acts on the smaller piston, resulting in a larger force on the smaller piston.

We know that the force applied on the larger piston is 1500 N and the area of the larger piston is 25 m^2. Therefore, the pressure applied on the fluid is:

P = F/A = 1500 N / 25 m^2 = 60 Pa

This pressure is transmitted undiminished to every part of the fluid and acts on the smaller piston, which has an area of 5 m^2. Therefore, the force acting on the smaller piston is:

F = P × A = 60 Pa × 5 m^2 = 300 N

Therefore, a force of 300 N is needed to lift the crate.

Answer:

A cookie pan that's been heated by an oven will burn your hand because the pan is a solid object and has a much higher thermal conductivity than the air inside the oven. When the pan is heated in the oven, it absorbs the heat and becomes very hot. When you touch the hot pan, the heat energy flows from the pan to your hand, causing burns.

On the other hand, the air inside the oven has a lower thermal conductivity than the pan. This means that the air does not transfer heat as quickly as the pan does. Therefore, although the air inside the oven is hot, it does not burn your hand as easily as the hot pan would.

In other words, the pan is a better conductor of heat than the air inside the oven, which is why it can burn your hand even though they are at the same temperature.

Explanation:

If bulk is 3.6 kg lenght is 2.6 m turns around a direction passing toward the rod, rate 39 file(s. speed of 12 s actually the gravitational acceleration 99.7 J .

The definition of rotational energy, also referred angular kinetic energy, is as follows: It is the portion of an object's total kinetic energy that results from rotation. The angular velocity and the square of the angular velocity have a direct relationship with rotational kinetic energy.

The The International Systems of Units' (Symbol: J) unit of energy is the joule (/dul/ JEWEL, /dal/ JOWL) (SI). It is equivalent to the work generated with a force .

To know more about kinetic energy visit :

https://brainly.com/question/26472013

#SPJ1

The power of the lens in diopters is P = 1/0.026 = 38.5 dioptres.

The power of the lens needed to magnify the reading material by a factor of 3.5x when a book is placed 9.0 cm behind a lens is 38.5 dioptres.

The focal length of the lens is given by the reciprocal of the magnification (M) multiplied by the distance of the object from the lens (d): f = 1/M x d.

In order to magnify the reading material by a factor of 3.5x when a book is placed 9.0 cm behind a lens, a diverging or converging lens is needed. The power of the lens in diopters can be calculated using the equation

P = 1/f, where P is the power in dioptres and f is the focal length in metres.

In this case, f = 1/3.5 x 0.09 = 0.026 m.

Thus, the power of the lens in diopters is P = 1/0.026 = 38.5 dioptres. Therefore, the power of the lens needed to magnify the reading material by a factor of 3.5x when a book is placed 9.0 cm behind a lens is 38.5 dioptres.

The type of image this would be is a magnified and real image. Magnified because the magnification factor is greater than one, and real image because it is formed on the same side of the lens as the object. It is also upright because the object is above the principal axis and the image below the principal axis. It is not inverted because the object and image appear the same way.  Lastly, it is not a virtual image because the image is formed by the refraction of light, not by the reflected rays.

For more questions related to magnification

https://brainly.com/question/29314559

#SPJ1

The force exerted by the rain on the patch is 0.231 N.

The force exerted by the raindrops on the patch can be found using the formula; F = m × v

where F will be the force, m will be the mass of each raindrop, and v is velocity of each raindrop.

The mass of each raindrop is given as 1.1 grams, which can be converted to kilograms by dividing by 1000;

m = 1.1 g / 1000 = 0.0011 kg

The velocity of each raindrop is given as 6 m/s.

Now, we need to determine the number of raindrops that strike the patch in one second. If the patch is receiving 35 raindrops per second, then the number of raindrops that strike the patch in one second is also 35.

Therefore, the total force exerted by the rain on the patch is;

F = m × v × n

where n will be the number of raindrops per second.

Plugging in the values, we get;

F = 0.0011 kg × 6 m/s × 35

F = 0.231 N

To know more about force here

https://brainly.com/question/13191643

#SPJ4

If there were friction present on the table, it would cause a resistive force that would oppose the motion of the mass on the table.

Friction results in a decrease in the overall speed and acceleration of the mass-pulley system. The friction force would also cause heat to be generated, which would lead to an increase in the system's temperature. Additionally, the presence of friction would affect the tension in the string connecting the mass to the pulley, which would have to work against the friction force to maintain the motion of the system.

Learn more about friction at https://brainly.com/question/24338873

#SPJ11

(a) To find the angular acceleration of the tires, we first need to find the initial and final angular velocities. The number of revolutions the tires make is not directly useful, so we need to convert it to an angle in radians.

The circumference of the tire is:

C = πd = π(0.90 m) = 2.83 m

So, each revolution covers an arc length of 2.83 m. Therefore, 67 revolutions correspond to an arc length of:

s = 67 × 2.83 m = 189.61 m

The initial velocity of the car is:

v1 = 85.0 km/h = 23.6 m/s

The final velocity of the car is:

v2 = 63.0 km/h = 17.5 m/s

The average velocity during the deceleration is:

v_avg = (v1 + v2) / 2 = (23.6 m/s + 17.5 m/s) / 2 = 20.55 m/s

The time it takes for the car to go from 85.0 km/h to 63.0 km/h is:

Δt = (v2 - v1) / a

where a is the angular acceleration. We can relate the linear acceleration a_l of the car to the angular acceleration a by:

a_l = a r

where r is the radius of the tire. In this case, r = 0.45 m.

The linear acceleration of the car is:

a_l = (v2 - v1) / Δt = (17.5 m/s - 23.6 m/s) / Δt = -6.10 m/s[tex]^2[/tex]

So, the angular acceleration of the tires is:

a = a_l / r = (-6.10 m/s[tex]^2[/tex] / 0.45 m = -13.56 rad/s^2 (note the negative sign indicates deceleration)

(b) If the car continues to decelerate at this rate, we can find the time it takes to stop using the equation:

v = v0 + at

where v is the final velocity (0 m/s), v0 is the initial velocity (23.6 m/s), a is the linear acceleration (-6.10 m/s^2), and t is the time we want to find.

Rearranging this equation, we get:

t = (v - v0) / a = (0 m/s - 23.6 m/s) / (-6.10 m/s[tex]^2[/tex] = 3.87 s

(c) To find the distance the car travels during this time, we can use the equation:

s = v0t + 1/2 at[tex]^2[/tex]

where s is the distance we want to find.

Plugging in the values we know, we get:

s = (23.6 m/s)(3.87 s) + 1/2 (-6.10 m/s[tex]^2)(3.87 s)^2[/tex] = 90.9 m

Therefore, the car travels a total distance of 189.61 m + 90.9 m = 280.51 m before coming to a stop.

To learn more about  acceleration here

https://brainly.com/question/460763

#SPJ4

(a) To produce a total charge of 4.55 x [tex]10^-^1^2[/tex] C, we need  2.84 x [tex]10^7[/tex] protons.

(b) The magnitude of the force between the gold nucleus and the electron is 7.31 x [tex]10^-^8[/tex] N.

(a) To calculate the number of protons needed to produce a total charge of 4.55 · 10-12 C, we can use the fact that the charge of a single proton is e=1.60 x [tex]10^-^1^9[/tex] C:

Number of protons = total charge / charge of one proton = 4.55 x [tex]10^-^1^2[/tex] C / 1.60 x [tex]10^-^1^9[/tex] C ≈ 2.84 x [tex]10^7[/tex] protons

(b) To calculate the magnitude of the force between a gold nucleus (+79e) and an electron on an orbit with radius 4.97·10-12 m, we can use Coulomb's law:

F = k * |q1| * |q2| / [tex]r^2[/tex]

where k is Coulomb's constant (k=8.99 x [tex]10^9[/tex] N·[tex]m^2[/tex]/[tex]C^2[/tex]), q1 and q2 are the charges of the particles, and r is the distance between them.

Here, we have q1=+79e and q2=-e (the charge of an electron), so we can simplify:

F = k * |79e| * |e| / (4.97 x [tex]10^-^1^2[/tex] m)² ≈ 7.31 x [tex]10^-^8[/tex] N

Therefore, the magnitude of the force between the gold nucleus and the electron is approximately 7.31 x [tex]10^-^8[/tex] N.

Learn more about Protons

brainly.com/question/30895149

#SPJ11

The capacitance of a p-n junction depends on the doping concentration and the bias voltage. Doubling the doping concentration of the n-side will decrease the depletion width and increase the capacitance. However, increasing the reverse bias voltage will increase the depletion width and decrease the capacitance.

Using the formula for the capacitance of a p-n junction, C = εA / d, where ε is the permittivity of the semiconductor, A is the area of the junction, and d is the depletion width, we can calculate the new capacitance.

Assuming that the area of the junction and the permittivity of the semiconductor remain constant, doubling the doping concentration of the n-side will halve the depletion width. Therefore, the new depletion width will be d/2.

When the reverse bias is increased to 80 V, the depletion width will increase by a factor of 8. Therefore, the new depletion width will be 8d.

Using the formula for the capacitance, we get:

C' = εA / (8d/2)
  = 4εA / d

Therefore, the new capacitance will be 4 times the original capacitance:

C' = 4 x 10 pf
  = 40 pf

Therefore, if the doping of the n side is doubled and the reverse bias is changed to 80 V, the capacitance of the p-n junction will be 40 pf.

Know more about p-n junction:

https://brainly.com/question/29341283

#SPJ11

The charge flowing through the film in 15 min is To find the charge that flows through the gold film in an integrated circuit with a current density of 8.0×10^5 A/m^2 in 15 minutes is 1.50 × 10^-1 Coulombs.

Determine the cross-sectional area of the gold film:
Area = thickness × width = (2.7 × 10^-6 m) × (77 × 10^-6 m) = 2.079 × 10^-10 m^2
Calculate the total current flowing through the film:
Current (I) = current density × area = (8.0 × 10^5 A/m^2) × (2.079 × 10^-10 m^2) = 1.6632 × 10^-4 A
Convert the time given (15 minutes) to seconds:
Time (t) = 15 min × 60 s/min = 900 s
Calculate the charge (Q) that flows through the film using the formula Q = I × t:
Charge (Q) = (1.6632 × 10^-4 A) × (900 s) = 1.49688 × 10^-1 C
So, the charge that flows through the gold film in an integrated circuit with a current density of 8.0×10^5 A/m^2 in 15 minutes is approximately 1.50 × 10^-1 Coulombs.

Learn more about integrated circuits here: https://brainly.com/question/13449619

#SPJ11

The ionization energy of tritonium, when ultraviolet radiation of wavelength 58.4 nm is directed onto a sample of tritonium, is 4.55 × 10^-18 J.

To calculate the ionization energy of tritonium, we need to use the equation E = hc/λ, where E is the energy of a photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the radiation.

First, we need to convert the wavelength from nanometers to meters:
58.4 nm = 5.84 × 10⁻⁸ m

Next, we can calculate the energy of a photon with this wavelength:
E = (6.626 × 10⁻³⁴ J s) × (3.00 × 10⁸ m/s) / (5.84 × 10⁻⁸ m)
E = 3.40 × 10⁻¹⁸ J

Now we can calculate the ionization energy of tritonium by using the equation:
ionization energy = kinetic energy of ejected electron + energy of incoming photon

The speed of the ejected electron is given as 1.59 × 10⁶ m/s,

Kinetic energy can be calculated by the equation KE = 1/2 mv², where m is the mass of the electron and v is its velocity.

We can assume the mass of the electron is 9.11 × 10⁻³¹ kg:
KE = 1/2 (9.11 × 10⁻³¹ kg) (1.59 × 10⁶ m/s)²
KE = 1.15 × 10⁻¹⁸ J

Finally, we can calculate the ionization energy:
ionization energy = 1.15 × 10⁻¹⁸ J + 3.42 × 10⁻¹⁸ J
ionization energy = 4.55 × 10⁻¹⁸ J

Therefore, the ionization energy of tritonium is 4.55 × 10⁻¹⁸ J.

Learn more about ionization energy:

https://brainly.com/question/30831422

#SPJ11

If we see a massive main-sequence star that is above 10 solar masses, we can conclude that it is relatively young compared to most stars.

Massive stars have a shorter lifespan than lower-mass stars. They burn through their fuel at a much faster rate, resulting in a shorter main-sequence lifetime. As a result, the more massive the star, the shorter its lifespan. Therefore, a massive main-sequence star above 10 solar masses must be relatively young compared to most stars because it has not had enough time to exhaust its fuel and evolve off the main sequence.

Learn more about massive stars at https://brainly.com/question/31517058

#SPJ11

To find the marginal product of capital (MPK), we need to take the partial derivative of Y with respect to K, while holding L constant:

MPK = ∂Y/∂K, L constant

Using the given production function, Y = AK^(0.5)L^(0.5), we can take the partial derivative with respect to K:

∂Y/∂K = 0.5AK^(-0.5)L^(0.5)

Now we can substitute the given values A=100, K=100, and L=100 into the MPK equation:

MPK = 0.5AK^(-0.5)L^(0.5)

MPK = 0.5(100)(100)^(-0.5)(100)^(0.5)

MPK = 0.5(100)(1/10)(10)

MPK = 5

Therefore, the marginal product of capital when A=100, K=100, and L=100 is 5.

To know more about  marginal product of capital visit here :

https://brainly.com/question/13623353

#SPJ11

A capacitor of approximately 3.14 μF in series with a 100-ohm resistor and a 23 mH inductor will give a resonance frequency of 900 Hz.

To calculate the capacitance required for resonance at 900 Hz, we can use the formula: resonance frequency = 1 / (2π√(L*C))
Where L is the inductance in henries and C is the capacitance in farads.

resonance frequency = 900 Hz
resistor = 100 Ω
inductance = 23 mH = 0.023 H

Substituting the values:

900 = 1 / (2π√(0.023*C))

Solving for C:

C = 1 / (4π² * 0.023 * 900²)
C = 0.0012 μF

Therefore, a capacitor of 0.0012 microfarads (or 1.2 nanofarads) in series with a 100 Ω resistor and a 23 mH inductor will give a resonance frequency of 900 Hz.
To find the value of the capacitor that will create a resonance frequency of 900 Hz when in series with a 100-ohm resistor and a 23 mH inductor, follow these steps:

Step 1: Understand the resonance frequency formula for an RLC series circuit:
f_resonance = 1 / (2π * √(L * C))

Step 2: Plug in the given values:
f_resonance = 900 Hz
L = 23 mH = 0.023 H (converting to henries)

Step 3: Rearrange the formula to solve for C:
C = 1 / (4π² * f_resonance² * L)

Step 4: Plug in the values and calculate the capacitance:
C = 1 / (4π² * (900)² * 0.023)
C ≈ 3.1405e-9 F

Step 5: Convert the capacitance to microfarads:
C = 3.1405e-9 F * (10^6 μF/F)
C ≈ 3.14 μF

Learn more about resonance frequency at: brainly.com/question/13040523

#SPJ11

These formulas provide a way to calculate the mean and variability of Y, which are important measures for understanding the behavior of random variables.

a) The probability mass function for [tex]X_{33}[/tex] is given by [tex]PX_{33}[/tex](x) = (100 choose x) * [tex]p^x[/tex] *[tex](1-p)^(100-x).[/tex]

b) No, X1 and X2 are not independent because the outcome of the first coin flip can affect the outcome of the second coin flip.

c) The distribution of Y is a binomial distribution with parameters n = 1000 and p. Therefore, the probability mass function for Y is given by PY(y) = (1000 choose y) * [tex]p^y[/tex] * [tex](1-p)^(1000-y).[/tex]

d) The expected value of Y is E[Y] = np = 1000p, and the variance of Y is Var[Y] = np(1-p) = 1000p(1-p).

Variability refers to the degree to which data or observations fluctuate or vary from the mean or expected value. It is a statistical concept that measures the dispersion of data points in a dataset. A dataset with high variability indicates that the data points are widely spread out, while a low variability indicates that the data points are clustered around the mean.

There are different measures of variability, including range, variance, and standard deviation. Range is the difference between the maximum and minimum values in a dataset, while variance and standard deviation measure the average squared deviation from the mean. These measures are important in many fields, such as finance, economics, and psychology, as they help to understand the spread of data and assess the reliability of statistical estimates.

To learn more about Variability visit here:

brainly.com/question/20711705

#SPJ4

The junction rule is a statement of conservation of charge at a point in an electrical circuit where three or more conductive paths meet.

It states that the sum of the currents entering the junction must equal the sum of the currents leaving the junction. This principle follows directly from the conservation of charge, which states that charge can neither be created nor destroyed.

In an electrical circuit, charge is carried by electrons, and the junction rule ensures that the same amount of charge that enters a junction also exits the junction, thus satisfying the conservation of charge principle. Therefore, the junction rule is a fundamental application of the conservation of charge principle in electrical circuits.

To learn more about charge, click here:

https://brainly.com/question/3412043

#SPJ11

The collapse of the Broughton Bridge in 1831 was caused by the soldiers marching in lock step.

When the soldiers marched in unison, their footsteps created a rhythmic vibration that was transmitted to the bridge. This vibration matched the natural frequency of the bridge, causing the amplitude of the bouncing to increase gradually. As the amplitude increased, the bridge became unstable, and eventually, it collapsed.
After the collapse, soldiers were ordered to "break step" or march at their own individual rates while crossing bridges. This was to prevent the recurrence of such incidents. When soldiers march in lock step, they create a synchronized force that can be transmitted to the bridge, causing the amplitude of the vibrations to increase. However, when soldiers march at their own individual rates, the forces they create are not synchronized, and the bridge does not vibrate in a consistent pattern. This reduces the chances of the bridge collapsing due to the march of the soldiers.

Learn more about amplitude here: https://brainly.com/question/3613222

#SPJ11

Answer:

1.9 × 10^-25 N

Explanation:

The magnitude of the magnetic force on a moving charged particle in a magnetic field is given by:

F = qvB sin(theta)

where F is the force on the particle, q is the charge of the particle, v is the velocity of the particle, B is the magnetic field, and theta is the angle between the velocity and the magnetic field.

In this problem, the electron is moving perpendicular to the magnetic field, so theta = 90 degrees, and sin(theta) = 1. Also, the charge of an electron is -1.6 × 10^-19 C.

Plugging in the given values, we get:

F = (-1.6 × 10^-19 C) × (3.0 × 10^4 m/s) × (0.40 T) × sin(90°)

F = 1.9 × 10^-25 N

Therefore, the magnitude of the magnetic force on the electron is 1.9 × 10^-25 N, which corresponds to option (b).

*IG:whis.sama_ent

The quantity that has units of kg·m²/s is angular momentum. (D)

Angular momentum is a measure of the amount of rotation an object has around an axis. It is the product of the moment of inertia and angular velocity of the object.

The moment of inertia depends on the distribution of mass of an object and the axis of rotation, while the angular velocity describes how quickly the object is rotating around the axis. The product of these two quantities gives the angular momentum of the object.

In physics, units of measurements are used to represent different types of quantities. The units of kg·m²/s represent a combination of mass, distance, and time.

This combination is characteristic of angular momentum, which is a rotational analog of linear momentum and is distinct from work and power, which have different units of measurement.(D)

To know more about angular momentum click on below link:

https://brainly.com/question/29897173#

#SPJ11

The result will be the gravitational force between Toutatis and Earth. Dividing this force by the mass of Toutatis will give us the acceleration of Toutatis due to Earth.

What is Acceleration?

Acceleration is a vector quantity that measures the rate of change of velocity with respect to time. It is defined as the change in velocity per unit of time. Acceleration can be positive or negative, depending on whether the velocity of an object is increasing or decreasing, respectively.

where F is the gravitational force between two objects, G is the gravitational constant, m1 and m2 are the masses of the two objects, and r is the distance between their centers.

Given:

Mass of asteroid Toutatis (m1) = 5.0 × [tex]10^{13}[/tex]kg

Mass of Earth (m2) = mass of Earth ≈ 5.97 × [tex]10^{24}[/tex] kg

Distance between Earth and Toutatis at closest approach = 45 times the distance to the Moon ≈ 45 × 3.84 × [tex]10^{8}[/tex] m

Plugging these values into the formula, we can calculate the acceleration of Earth due to Toutatis:

F = G * ([tex]m_{1}[/tex] * [tex]m_{2}[/tex]) [tex]r^{2}[/tex]

The result will be the gravitational force between Earth and Toutatis. Dividing this force by the mass of Earth will give us the acceleration of Earth due to Toutatis.

Since the distance and the masses are the same, the two forces are equal in magnitude but opposite in direction. Therefore, the net force on the system is zero, and the acceleration of Toutatis due to Earth is also zero.

Therefore, the acceleration of Toutatis due to Earth at its closest approach in 1988 was zero.

Learn more about Acceleration from the given link

https://brainly.com/question/460763

#SPJ1

a. The magnetic latitude of the lavas erupted at 60°N, 51° magnetic latitude. b. The pole position was at 39.4°N, 144.4°E. The lavas indicate they were erupted on a continent that has moved from its original location.

c. A 5° error in the inclination angle measurement would result in an error of approximately ±9° in the calculated paleolatitude.

a. The angle of inclination is equal to the magnetic latitude, which can be found using the magnetic dipole equation. At 60°N with an inclination of 37°, the magnetic latitude is 51°.

b. The direction of magnetization and inclination angle provide information about the Earth's magnetic field at the time of eruption. The pole position can be calculated using the paleomagnetic data. The pole position was at 39.4°N, 144.4°E, which is significantly different from the current pole position. This indicates that the continent on which these lavas occur has moved from its original location.

learn more about magnetic here:

https://brainly.com/question/7977566

#SPJ11

We can write any expression as a product of two trigonometric functions of different frequencies.

I can provide a general of how to write an expression as a product of two trigonometric functions of different frequencies.

To write an expression as a product of two trigonometric functions of different frequencies, we can use the trigonometric identity:

sin(a+b) = sin(a)cos(b) + cos(a)sin(b)

This identity tells us that we can express the product of two sine functions of different frequencies as a sum of two sine functions of different frequencies, and we can express the product of a sine and cosine function of different frequencies as a sum of two sine functions of different frequencies.

For example, suppose we are given the expression:

sin(3x)sin(4x)

We can use the identity above to express this as a sum of two sine functions of different frequencies:

sin(3x)sin(4x) = 0.5[cos(x)-cos(7x)]

Similarly, if we are given the expression:

cos(5x)sin(2x)

We can use the identity to express this as a sum of two sine functions of different frequencies:

cos(5x)sin(2x) = 0.5[sin(7x)-sin(3x)]

Learn more about trigonometric

brainly.com/question/13625065

#SPJ11

The distance travelled by automobile while braking is around 7600 m, the angular speed of the tyres about their axles is 27.8 rad/s, and the magnitude of the angular acceleration of the wheels is 0.0605 rad/s2.

The formula for angular speed may be used to calculate the angular speed of the tyres after first changing the velocity from km/h to m/s:

[tex]v = 50.0 km/h = 13.9 m/sr = 0.500 m (radius of the tire)ω = v/r = 13.9 m/s / 0.500 m = 27.8 rad/s[/tex]

b)The following formula can be used to determine the tyre's initial angular speed:

ω^2 = ω0^2 + 2αθ

0 = ω0^2 + 2α(70π)

α = -ω0^2 / (2θ)

α = [tex]- (27.8 rad/s)^2 / (2 × 70π) = -0.0605 rad/s^2[/tex]

c)The following formula may be used to determine how far the automobile travelled when braking:

θ = ω0t + (1/2)αt^2

v = at

[tex]t = v/a = 13.9 m/s / 0.0605 rad/s^2 = 229 s[/tex]

[tex]70π = (27.8 rad/s)(229 s) + (1/2)(-0.0605 rad/s^2)(229 s)^2[/tex]

Simplifying:

70π = 6354 rad + 1255 m=7600 m

to know more about automobiles here:

brainly.com/question/1193772

#SPJ1