What does the reproductive system control?

Answer:

1.932 kg

Explanation:

First we convert 100.0 mL to L:

Then we calculate the mass of the substance, using the definition of density:

As the multiplication involves two numbers of 4 significant figures each, the answer needs to have 4 significants figures as well.

Answer:

0.871 mL

Explanation:

Step 1: Write the balanced neutralization reaction

KOH + HF ⇒ KF + H₂O

Step 2: Calculate the reacting moles of HF

9.55 mL of 0.114 M HF react.

9.55 × 10⁻³ L × 0.114 mol/L = 1.09 × 10⁻³ mol

Step 3: Calculate the moles of KOH needed to react with 1.09 × 10⁻³ moles of HF

The molar ratio of KOH to HF is 1:1. The moles of KOH needed are 1/1 × 1.09 × 10⁻³ mol = 1.09 × 10⁻³ mol.

Step 4: Calculate the volume of KOH solution that contains 1.09 × 10⁻³ moles of KOH

An unknown volume of 1.252 M KOH solution contains 1.09 × 10⁻³ moles of KOH.

1.09 × 10⁻³ mol × 1 L/1.252 mol = 8.71 × 10⁻⁴ L = 0.871 mL

Answer:

FADH2 is a reducing agent.

FAD is an oxidizing agent.

Explanation:

The full form of FAD is flavin adenine dinucleotide. It is mainly a redox-active coenzyme which is associated with the different proteins and is involved with the enzymatic reactions in the metabolism.

FAD is obtained by donating or accepting electrons.

In the citric acid cycle,

succinate + FAD → fumarate + [tex]$FADH_2$[/tex]

Thus we see that FAD is an oxidizing agent while [tex]$FADH_2$[/tex] is a reducing agent.      

Answer:

Water molecule has hydrogen bonding and surface tension

Explanation:

Intermolecular behavior of water is different from that of the intermolecular force of oil because water molecule is polar in nature while oil molecule is non polar. Dur to polar nature, water molecule has high surface tension which keep its atoms intact. Also the water molecule being polar also exhibit hydrogen bonding between hydrogen (+ive) and oxygen atom (-ive)

Answer:طيزي

Explanation:

Answer:

26 Hydrogen atoms

Explanation:

H2O

Each hydrogen atom: 2+16 = 18g

Hence,

1 atom -> 18g

x atoms -> 709g

709/18 = 39 atoms

Therefore, 39 atoms give 709g

Hence, 26 Hydrogen atoms are used

Feel free to mark it as brainliest :D

Solution :

The partition coefficient

[tex]$k_d= \frac{\text{(mass of caffeine in }CH_2Cl_2 / \text{volume of }CH_2Cl_2)}{\text{(mass of caffeine in water/ volume of water)}}$[/tex]

   = 9.0

A). 1 x 200 mL extraction

Let m be the mass of caffeine in water

Mass of caffeine in [tex]$CH_2Cl_2$[/tex] = 100 - m

∴ [tex]$\frac{(100-m)/200}{m/200}=9$[/tex]

  [tex]$\frac{100-m}{m}=9$[/tex]

  [tex]$10 \ m = 100$[/tex]

[tex]$m=\frac{100}{10}$[/tex]

     = 10

Therefore, the mass remaining in the coffee is m = 10 mg

B). 2 x 100 mL extraction

First extraction :

Let [tex]$m_1$[/tex] be the mass of the caffeine in water.

Mass of caffeine in [tex]$CH_2Cl_2$[/tex] = 100 - m

∴ [tex]$\frac{(100-m_1)/100}{m_1/200}=9$[/tex]

  [tex]$\frac{100-m_1}{m_1}=9$[/tex]

  [tex]$5.5 \ m_1 = 100$[/tex]

[tex]$m_1=\frac{100}{5.5}$[/tex]

     = 18.18

Mass remaining in the coffee after the 1st extraction [tex]$m_1$[/tex] = 18.18 mg

Second extraction:

Let [tex]$m_2$[/tex] be the mass of the caffeine in water.

Mass of caffeine in [tex]$CH_2Cl_2$[/tex] = 18.18 - [tex]$m_2$[/tex]

∴ [tex]$\frac{(18.18-m_2)/100}{m_2/200}=9$[/tex]

  [tex]$\frac{18.18-m_2}{m_2}=9$[/tex]

  [tex]$5.5 \ m_2 = 18.18$[/tex]

[tex]$m_1=\frac{18.18}{5.5}$[/tex]

     = 3.3

Mass remaining in the coffee after the 1st extraction [tex]$m_2$[/tex] = 3.3 mg

Answer:

6.59 g/cm³

Explanation:

Step 1: Given data

Step 2: Calculate the volume of the cube

We will use the following expression.

V = s³ = (2.54 cm)³ = 16.4 cm³

Step 3: Calculate the density of the solid

Density is an intrinsic property, equal to the quotient between the mass and the volume.

ρ = m/V

ρ = 108 g / 16.4 cm³ = 6.59 g/cm³

Answer: 30.978

Explanation:

From the equation 2 moles of Fe will result in 3 moles copper

so .325 moles Fe will result in .4875 moles Cu

Cu weights 63.546 gm per mole

.4875 moles * 63.546 gm / mole = 30.978 gm of Cu

Answer:

9.07 L

Explanation:

Calculate the volume occupied at s.t.p by 6.89 g of NH₃ gas [H = 1.0, N = 14.0​].

Step 1: Given and required data

Step 2: Calculate the moles (n) of NH₃

We will use the following epxression.

n = m / M

n = 6.89 g / (17.0 g/mol) = 0.405 mol

Step 3: Calculate the volume occupied by 0.405 moles of NH₃ at STP

At STP, 1 mole of NH₃ occupies 22.4 L (assuming ideal behavior).

0.405 mol × 22.4 L/1 mol = 9.07 L

Answer:

I)Acetylene

II)2-Methyl-1-butanol

Explanation:

I)appears as a colorless gas with a faint garlic-like odor. Easily ignited and burns with a sooty flame. Gas is lighter than air.

Answer:

organic acid

Explanation:

Answer:

Hey mate.....

Explanation:

This is ur answer.....

Alkyl carboxylic acid

Valeric acid (pentanoic acid) is a straight-chain alkyl carboxylic acid with a very unpleasant odor. It is found naturally in the perennial flowering plant valerian (Valeriana officinalis), from which it gets its name.

Hope it helps!

Brainliest pls!

Follow me! :)

Answer:

The answer is 10cm^3

Explanation:

5x1x2=10

Mind marking me brainliest? :)

n = 0.0395 mol Xe

Explanation:

Use the ideal gas law:

PV = nRT

n = PV/RT

= (1.15 atm)(0.786 L)/(0.08205 L-atm/mol-K)(279K)

= 0.0395 mol Xe

Answer:

I think its -8.75

Explanation:

Hope this helps!11

Answer:

I think it is 7.60 X 1

but if it's not srry

Answer:

Explanation:

It orbits

Answer:

Explanation:

element is aluminium

shells              K            L              M             N

electrons        2             8             3

Petroleum  is a nonrenewable energy source. Therefore, the correct option is option B.

The sources of non-renewable energy will deplete or not be renewed within our lifetimes, or perhaps within many, many lifetimes. Coal, oil, and natural gas are the main fossil fuels used as non-renewable energy sources. The primary component of fossil fuels is carbon.

The formation of fossil fuels, which took place between 360 and 300 million years ago, is referred to as the Carboniferous Era for this reason. The formation of all fossil fuels was identical. Prior to the dinosaurs, Earth used to have a different terrain thousands of thousands of years ago. It was entirely covered in swampy forests and broad, shallow oceans. Petroleum  is a nonrenewable energy source.

Therefore, the correct option is option B.

To know more about nonrenewable energy source, here:

https://brainly.com/question/30378300

#SPJ7

Answer:

D. Cyclic alkane

Explanation: there is no double or triple bond

The type of molecule that is shown below in the picture is a cyclic alkane. The correct option is D.

This is the compound that contain hydrogen and carbon bond. They are mono cyclic saturated hydrocarbons.

These are the atoms that replace the hydrogen atom in an organic compound.

Thus, the correct option is D. Cyclic alkane.

Learn more about cyclic alkane

https://brainly.com/question/23802223

#SPJ2

Answer:

Explanation:

Percolation is a natural process in which surface water is gradually filtered through the soil into aquifers. When groundwater is depleted, recycled water can be introduced into aquifers by letting it gradually filter through the soil When you hear the word “percolation,” making coffee probably comes to mind.

Answer:

a)   1.12 MeV / nucleon

b)   5.62 MeV / nucleon

c)  8.80 MeV / nucleon

d) 8.56 MeV / nucleon

we can conclude that the binding energy has a maximum value for nuclei with a mass around 60

Explanation:

Binding energy = ( Δm * 931.5 ) MeV

Binding energy per nucleon = Binding energy in / Number of nucleon

a) ²H = 1 neutron , 1 proton = 2 nucleons

Given that the theoretical mass = 2.0141 u

Actual mass = 1.0078 u + 1.0087 u = 2.0165 u

Δm  = 2.0165 u - 2.0141 u = 2.4 * 10^-3 u

∴ Binding energy per nucleon = ( 2.4 * 10^-3  * 931.5 ) MeV / 2 nucleons

                                                  = 1.12 MeV / nucleon

b) ⁷Li = 3 protons , 4 neutrons = 7 nucleons

theoretical mass = 7.0160 u

Actual mass = ( 3 * 1.0078 ) + ( 4 * 1.0087 )  = 7.0582 u  

Δm  = ( 7.0582 u  - 7.0160 u  ) = 0.0422 u

∴ Binding energy per nucleon = ( 0.0422 * 931.5 ) / 7

                                                  = 5.62 MeV / nucleon

C) ⁶²Ni = 28 protons , 34 neutrons = 62 nucleons

Theoretical mass = 61.9283 u

Actual mass = ( 28 * 1.0078 ) u + ( 34 * 1.0087 ) u

                    = 62.5142 u

Δm = 0.5859 u  

∴ Binding energy per nucleon = ( 0.5859 * 931.5 ) / 62

                                                  = 8.80 MeV / nucleon

D) ¹¹⁰Cd = 48 protons , 62 neutrons = 110 nucleons

Theoretical mass = 109.9030 u

Actual mass = ( 48 * 1.0078 ) + ( 62 * 1.0087 )

                    = 110.9138 u

Δm  = ( 110.9138 - 109.9030 ) = 1.0108 u

∴ Binding energy per nucleon = ( 1.0108 * 931.5 ) / 110

                                                  = 8.56 MeV / nucleon

hence we can conclude that the binding energy has a maximum value for nuclei with a mass around 60

Answer:

2Na and 2HCl

Explanation:

The equation for the above chemical reaction is as follows:

2Na + 2HCI → 2NaCl + H2

In a reaction, the reactants are said to be those that combine together to form products. In this case, sodium (Na) and hydrochloric acid (HCl) are the reactants of this reaction

Answer:

Production of liquid oxygen from air Oxygen is generated by liquefaction of atmospheric air in the air separation unit (ASU). Cryogenic technique is the most commonly used for producing liquid oxygen for industrial and medical applications .

Explanation:

An air separation unit (ASU) uses continuous cryogenic distillation to continuously liquefy ambient air and separate the oxygen gas.

Oxygen is the second largest abundant element in the atmosphere comprising 20.8% by volume. Despite being mostly used as a gas, oxygen is frequently stored as a liquid. Compared to high-pressure gaseous storage with a similar capacity, liquid storage is less expensive and bulkier.

A cryogenic storage tank, one or more vaporizers, and a pressure control system make up a typical storage system. The cryogenic tank is built similarly to a vacuum bottle.

The primary air compressor is where the ASU manufacturing process starts, and the product storage tanks' output is where it concludes. Moisture, carbon dioxide, and hydrocarbons are taken out of the air after it has been compressed and put through a purification system.

To find more on oxygen manufacturing, refer here:

https://brainly.com/question/1064242

#SPJ6

Answer:

1.21 g of Tris

Explanation:

Our solution if made of a solute named Tris

Molecular weight of Tris is 121 g/mol

[Tris] = 100 mM

This is the concentration of solution:

(100 mmoles of Tris in 1 mL of solution) . 1000

Notice that mM = M . 1000  We convert from mM to M

100 mM . 1 M / 1000 mM = 0.1 M

M = molarity (moles of solute in 1 L of solution, or mmoles of solute in 1 mL of solution). Let's determine the mmoles of Tris

0.1 M = mmoles of Tris / 100 mL

mmoles of Tris = 100 mL . 0.1 M → 10 mmoles

We convert mmoles to moles → 10 mmol . 1mol / 1000mmoles = 0.010 mol

And now we determine the mass of solute, by molecular weight

0.010 mol . 121 g /mol = 1.21 g

Answer:

See explanation

Explanation:

Given the reaction;

3N2(g) + H2(g) = 2N3H(g).

We know that when a constraint is imposed on a reaction system in equilibrium, the equilibrium position will shift in such a way as to annul the constraint.

In this case, when the pressure is increased eightfold, the equilibrium position will shift towards the direction where there is the least total volumes.

In this particular reaction, the forward reaction has the least total volumes and is favoured by an eightfold increase in pressure.

Hence, when the pressure is increased eightfold, more N3H(g) is obtained.