what is the origin of cellular phones

According to the above-mentioned survey data, we can assume that text messaging is used by between 73.1% and 76.9% of all cell phone users, with a 95% confidence interval.

What is confidence interval in data interpretation?

It is the mean of your estimate plus and minus the range of that estimate makes a confidence interval.

So, The confidence interval is  range of values that, if you repeated your experiment or resampled the population in the same way, you would think your estimate to fall in a specific proportion of  time.

In statistics, confidence is another word for probability. If you create a confidence interval, for instance, with a 95% level of confidence, you can be sure that 95 out of 100 times, the estimate shall lie between the upper values and lower values indicated by the confidence interval.

Typically, the acceptable level of confidence is one less than the alpha, a value you choose for your statistical test:

Level of confidence = 1 - a(alpha).

Therefore, your confidence level would be 1 0.05 = 0.95, or 95%, if you used an alpha value of p < 0.05 for statistical significance.

To know more about probability, visit: https://brainly.com/question/29717968

#SPJ4

Ping command can use to determine whether your computer can still contact the server.

What is server?

A computer programme or apparatus that offers a service to another computer programme and its user, also known as the client, is referred to as a server. The actual machine that a server application runs on in a data centre is also commonly referred to as a server.

Ping command can use to determine whether your computer can still contact the server. The ping command is a utility that allows you to send an Internet Control Message Protocol (ICMP) Echo Request message to a server and receive an ICMP Echo Reply message in return. If the server is reachable and functioning properly, it will respond to the ping request with an Echo Reply message.

To use the ping command, open a command prompt and type "ping FileSrv2", where "FileSrv2" is the name of the server you want to contact. If the server is reachable, you will see a series of messages indicating that the ping request was sent and the Echo Reply message was received. If the server is not reachable, you will see a message indicating that the ping request timed out.

The other commands you listed (ifconfig, ipconfig, and netstat) are not suitable for determining whether your computer can contact a server. Ifconfig is a command used to configure network interfaces on Linux systems, and ipconfig is a command used to configure IP addresses on Windows systems. Netstat is a command used to display information about network connections on both Linux and Windows systems. None of these commands allow you to ping a server to determine its reachability.

To know more about server checkout https://brainly.com/question/14617109

#SPJ4

Choice 3 is accurate, and the following SQL... SELECT title FROM actor, casting, and movie WHERE movie name = "Marilyn Monroe" AND year = 1959; id = movie.id AND actor.id = actorid;.

IMDb, short for Internet Movie Database, is a website that contains data about movies, TV shows, home videos, video games, and streaming content online. It contains information about the cast, the production crew, and individual members as well as plot summaries, trivia, ratings, and reviews from fans and critics.

SQL is a query-based programming language used to control RDBMS. MySQL, on the other hand, is an RDBMS (Relational Database Management System) that makes use of SQL. Since SQL is a database language, and MySQL is software, this is the main distinction between the two.

To know more about SQL visit :-

https://brainly.com/question/20264930

#SPJ4

Update network settings should be considered next to resolve this problem.

Network settings on computers, mobile phones, video game consoles, tablets, and other smart devices describe preferred wired and wireless connectivity. All types of network connections, including those to the internet, local networks, and cellular networks, involve the use of network settings.

A wide range of device functions related to networking and connectivity can be managed using network settings. A network setting could refer to a variety of settings. Nevertheless, the name might vary depending on the app or operating system.

The following are some of the more typical network settings you might see:

Learn more about network settings

https://brainly.com/question/4422754

#SPJ4

Answer:

Explanation:

1. BGP is the most commonly used routing protocol for MPLS VPN Layer 3 configurations.

2. Each customer will be assigned a unique autonomous system (AS) number so that customer routes are not propagated to other customers in the same layer 3 VPN.

3. MPLS VPN Layer 3 configurations can provide traffic segregation between different customers’ networks using VRFs and route distinguishers (RD).

4. All routers in an MPLS VPN Layer 3 configuration must have full routing tables of all customers’ networks within the same layer 3 VPN.

All statements are true

All factors must be checked to ensure that each system component operates at its optimum level & has sufficient resources to minimize the occurrence of bottlenecks. (True)

A bottleneck is a process in a chain of processes that, due to its limited capacity, lowers the capacity of the entire chain. This concept is used in both production and project management. Production halts, supply overstock, customer pressure, and low employee morale are the effects of having a bottleneck.

Long-term bottlenecks as well as short-term ones exist. Temporary bottlenecks typically don't cause much of a problem because they are so brief. A skilled worker taking a few days off is an illustration of a momentary bottleneck. Continuous long-term bottlenecks can cause a production slowdown that is noticeable. When a machine is inefficient and consequently has a long queue, this can be an example of a long-term bottleneck.

Learn more about bottleneck

https://brainly.com/question/1266568

#SPJ4

The following can be used to replace/* line 1

for (Dog d : dogs) {/* line 1 */}

what is arraylist ?

A Java data structure called ArrayList is used to hold items inside a dynamic array. It is comparable to an array yet it has the flexibility to change in size as necessary.  ArrayList allows you to add, remove, and edit elements as needed, unlike arrays which have a set size. Many applications, such a database or queue, employ an arraylist to store data. Additionally, it is employed for collection storage. ArrayList is a more effective method of data storage than an array since it is dynamic and also can expand as new members are added. Additionally, ArrayList offers tools for data manipulation including sorting, searching, and filtering. It is a crucial component of every Java program and is employed in several different types of progrmming.

To learn more about arraylist

https://brainly.com/question/26666949

#SPJ4

Answer:

The +1 after n in the line n2 = friends.index("Emily", n + 1) tells the index method to start the search for "Emily" after the index of the previous match. This is useful if you want to find all occurrences of an element in a list and you only want to find matches that occur after the previous one.

For example, if the list is ["Harry", "Emily", "Bob", "Cari", "Emily"] and you want to find the index of both occurrences of "Emily", you can use the index method in a loop and specify a starting position for the search each time. The first time you call the index method, you start the search at the beginning of the list (at index 0). The second time you call the index method, you start the search after the index of the previous match, which is 1 (the index of the first occurrence of "Emily"). This means that the search will start at index 2 and will find the second occurrence of "Emily" at index 4.

Here is some example code that demonstrates how this works:

friends = ["Harry", "Emily", "Bob", "Cari", "Emily"]

# Find the first occurrence of "Emily"

n = friends.index("Emily")

print(n)  # Output: 1

# Find the second occurrence of "Emily"

n2 = friends.index("Emily", n + 1)

print(n2)  # Output: 4

Java recognizes the important data stored inside an object needs to be protected from code outside the object by using the access specifier private on fields.

Access specifier in Java programming language is to control the access for each member class. Since we want to protected the data that stored in object, we can use private on field access so the data is not available for the outside object code.

Thus, the correct answer is by using the access specifier private on fields to protected the important data that stored inside an object from code outside the object.

Learn more about access specifier here:

brainly.com/question/28289695

#SPJ4

Answer: A) 94B2  B) 692E

Explanation:

A) Hex = 6B4E

Decimal = 27470

Binary = 0110 1011 0100 1110

Step 1:

Take One's complement of binary number:

Write the binary Number :

0110 1011 0100 1110

Reverse all the values (Interchange each 0 with 1 and 1 with 0):

1001 0100 101 1 0001

Step 2:

Take Two’s complement by adding 1 in  previously written binary number:

1001 0100 101 1 0001

                               +1

= 1001 0100 1011 0010 (Two's Complement)

= 94B2

B) Hex = 96D2

Decimal = 38610

Binary = 1001 0110 1101 0010

Step 1:

Take One's complement of binary number:

Write the binary Number :

1001 0110 1101 0010

Reverse all the values (Interchange each 0 with 1 and 1 with 0):

0110 1001 0010 1101

Step 2:

Take Two’s complement by adding 1 in  previously written binary number:

0110 1001 0010 1101

                           +1

= 0110 1001 0010 1110 (Two's Complement)

= 692E

Answer:

#include <iostream>

using namespace std;

int main()

{

   // Declare variables to store the number input by the user and the count of odd and even numbers

   int number, oddCount = 0, evenCount = 0;

   // Use a do-while loop to input numbers until the user enters a negative number

   do

   {

       cout << "Enter a number: ";

       cin >> number;

       // Increment the count of odd numbers if the input number is odd

       if (number % 2 == 1)

       {

           oddCount++;

       }

       // Increment the count of even numbers if the input number is even

       else if (number % 2 == 0)

       {

           evenCount++;

       }

   }

   while (number >= 0);

   // Print the count of odd and even numbers

   cout << "Odd numbers found: " << oddCount << endl;

   cout << "Even numbers found: " << evenCount << endl;

   return 0;

}

Explanation:

This program will prompt the user to enter a number, and it will continue to input numbers until the user enters a negative number. For each number that is input, the program will increment the count of odd numbers if the number is odd, or the count of even numbers if the number is even. Finally, the program will print the count of odd and even numbers.

Here is an example of the output you would see if you ran this program:

Enter a number: 30

Enter a number: 17

Enter a number: 22

Enter a number: 9

Enter a number: 14

Enter a number: -5

Odd numbers found: 2

Even numbers found: 3

Number of cache misses for the variable a: 95

Total number of memory access for the variable a: 759

Number of cache misses for the variable c: 95

Total number of memory access for the variable c: 95

Cache miss rate for this code sequence (combined for a and c): 95/854 = 0.1114

what is cache miss?

A cache miss occurs whenever a processor as well as computer tries to access information from its memory space but is unsuccessful in doing so. As a result, there is a delay as the processor as well as computer must seek main memory or another external device to obtain the data or instruction.

Cache misses can happen for a number of reasons, including when data is removed from the cache as make way for fresh data, when the requested data is not available in the cache, or when a processor is unable to obtain the information because of a dispute involving more than one processor.

The processor as well as computer should access main memory whenever a cache miss occurs.

To learn more about cache miss

https://brainly.com/question/22099150

#SPJ4

The HTML page file, the received PHP values. The codes are written below.

Coding is making a program by using codes.

"<!DOCTYPE html> <html>"

• "<head>"

."<title>Exam</title>"

."</head>"

:black_circle: <body>

. <h1>Exam</h1>

• "a form with the action "exam.php" and the method "post"

:black_circle: <label>ProductID</label>

• "input name="productID" text="text" type="text">br> • <input type="submit" value="Submit">"

"</form>"

• "</body>"

."</html>"

• "<?php"

. "$productID = $_POST['productID'];"

:black_circle: $host is defined as "localhost";

. $user = "root";

:black_circle: $password = "";

$database is set to "northwindmysql" by default;

:black_circle: $connection = mysqli connect($host, $user, $password, $database);

• $sql = "select productID, count(") as Records, sum(unitprice quantity) as Total, avg(unitprice) as avgPrice

:black_circle: where productID = $productID extracted from order details, then grouped by productID";

• $result = mysqli query($connection, $sql);

:black_circle: $row is going to be equal to mysqli fetch assoc($result);

:black_circle: $avgSale is calculated by dividing $row['Total'] by $row['Records'];

:black_circle: echo "ProductID: ". $row['productID']. "br>"; $row['productID'] = "

:black_circle: echo "Records: ". $row['Records']. "br>"; echo "Records: ". $row['Records'].";

:black_circle: echo "Total: ". $row["Total"]. "br>"; echo "Total: ". $row["Total"].";

:black_circle: echo "avgPrice: ". $row['avgPrice']. "br>"; echo "avgPrice: ". $row['avgPrice'].";

:black_circle: echo "avgSale: ".$avgSale;

Thus, the codes are written above.

To learn more about coding, refer to the link:

https://brainly.com/question/497311

#SPJ4

The option that, by definition, the floating point format does not represent is (D) 6¼.

The single-precision floating-point format, often known as FP32 or float32, is a computer number format that typically takes up 32 bits in computer memory and uses a floating radix point to express a broad dynamic range of numeric values.

Real numbers are represented in hardware using floating-point formats, which are described in the IEEE-754 standard.

The MSVC compiler can represent floating-point integers in at least five internal formats on the hardware it targets.

Only two of these are used by the compiler.

Most engineering and technical calculations use floating point numbers to represent noninteger fractional quantities, such as 3.256, 2.1, and 0.0036.

So, the option which is not represented by the floating point format according to its definition is 6¼.

Therefore, the option that, by definition, the floating point format does not represent is (D) 6¼.

Know more about a floating-point format here:

https://brainly.com/question/13440970

#SPJ4

Users aged 25 to 34 who had their browser set to Spanish, viewers of videos after viewing webpages, and users who participated in social media or email campaigns.

The four pillars of market segmentation are demographic, psychographic, geographic, and behavioral, but think about including these four additional categories to strengthen your marketing initiatives.

Access audience reports by logging into your analytics account. At the top of your reports, click "Add segment." Choose "New users" and "Returning users" from the pre-built segments before clicking "Apply."

To know more about webpages visit:-

https://brainly.com/question/21587818

#SPJ4

Answer: F5

Explanation:

Here is how you can complete the code:

account_number = input("Enter a four-digit account number: ")

if len(account_number) != 4:

 print("Account number invalid - it must have 4 digits.")

 exit()

if int(account_number[3]) == int(account_number[0:3]) % 7:

 print("The account number is valid.")

else:

 print("Invalid.")

This code first prompts the user to enter a four-digit account number. It then checks the length of the input. If it is not equal to 4, it prints the message "Account number invalid - it must have 4 digits." and exits the program. If the length of the input is 4, it then checks if the fourth digit of the account number is equal to the remainder of the first three digits divided by 7. If it is, it prints "The account number is valid." Otherwise, it prints "Invalid."

Learn more about code, here https://brainly.com/question/497311

#SPJ4

Raven was asked to configure a web server with a specific class B public IP address. She was given 168.192.10.172 as a possible address.

A public IP address is an IP address that is directly accessible from the internet and is assigned by your internet service provider (ISP) to your network her router. Personal devices also have private IPs. This remains hidden when connecting to the internet using the router's public IP.

Class B IP address contains: a 16-bit network address and a 16-bit local (host) address. The first 2 bits of the network address are used to indicate the network class and the remaining 14 bits are used for the actual network address. There are: possible network addresses (16,384) and host addresses (65,536).

Class B IP addresses are used for medium and large networks of companies and organizations. Supports up to 65,000 hosts on 16,000 individual networks. Class C addresses are the most common and are used in small businesses and home networks.

To learn more about IP address visit:

https://brainly.com/question/27961221

#SPJ4

The incorrect statement is that they help normalize the output of each neuron to a range between 1 and 0 only. The correct option is A.

In artificial neural networks, an activation function is a function that outputs a smaller value for tiny inputs and a higher value if its inputs are greater than a threshold. The activation function "fires" if the inputs are big enough; otherwise, nothing happens.

A neuron's activation status is determined by an activation function. By employing simpler mathematical procedures, it will determine whether or not the neuron's input to the network is significant during the prediction process.

Any real value may be used as an input for the Sigmoid Function, which produces values between 0 and 1.

Thus, the correct option is A.

For more details regarding networking, visit:

https://brainly.com/question/15002514

#SPJ4

Your question seems incomplete, the missing options are:

Activation functions help normalize the output of each neuron to a range between 1 and 0 only.

Activation functions are mathematical equations that determine the output of a neural network.

The activation function is attached to each neuron in the neural network, and determines whether it should be activated (“fired”) or not.

All of the above.

The concept of availability describes the percentage of time that a system responds well to requests, expressed as a percentage over time.

It is a system concept that can be scaled up and down to meet your needs. Percentage of time that the system successfully responded to requests. Expressed as a percentage over time. A system must have 100% uptime to be considered available.

Usability is a measure of whether a given user can use a product/design in a given context to effectively, efficiently and satisfactorily achieve a defined goal.

Resilience refers to the ability of a system's "computers, networks, cloud clusters, etc." Operations can continue without interruption in the event of failure of one or more components.

To learn more about computer system visit:

https://brainly.com/question/2612067

#SPJ4

N-1 indicates how many passes there will be. Here, N=6. Similar to selection sort, insertion sort divides the list into two sections: one with sorted entries and the other with unsorted elements.

The insert action adds one or more data elements to an array. At the start, end, or any specified index of the array, a new element may be inserted depending on the necessity. In this case, the insertion action is implemented practically by adding data to the end of the array.

The way tailors hang shirts in a closet is a another real-world illustration of insertion sort. They keep them organised by size at all times so they can.

To know more about unsorted elements visit:-

https://brainly.com/question/14672814

#SPJ4

The DataFrame's Numpy representation can be obtained using the values property. The axis labels will be eliminated and only the values in the DataFrame will be returned.

In Python, we can reshape an array using the numpy.reshape() function. Basically, reshaping involves altering the geometry of an array.

To convert a DataFrame from a wide to a long format, use the melt() function. A DataFrame with one or more identifier columns and the remaining columns unpivoted to the row axis, leaving only two non-identifier columns by default named variable and value, is useful.

To know more about dataframe visit :-

https://brainly.com/question/28190273

#SPJ4

The correct way to write the function is O =AVERAGE (E2:E39).

This is because the range is from E2 to E39, so we need to use the colon (:) to indicate the range. The other operators (+, -, ; ) are not used when indicating a range.

When writing functions, it is important to pay attention to the notation used. Notation is the symbols and characters used to represent mathematical expressions, equations, and operations. It is the way to make sure that the function is written correctly, and that it will give the desired result. Using the wrong notation can lead to errors and incorrect results.

For example, when writing a function to determine the average total daily sales over the past 12 months at all stores, a range of E2 to E39 must be specified. If the wrong notation is used, such as +, -, or ;, then the function will not work correctly. The correct notation to use is the colon (:). Using this symbol tells the function to include all the values within the given range.

It is important to pay attention to the notation being used when writing functions. Not only does it help to ensure that the function is written correctly, it also helps to avoid errors that can lead to incorrect results. By using the correct notation, the function will return the desired result.

Learn more about functions:

https://brainly.com/question/17043948

#SPJ4

The transformed value of 35 using min-max normalization would be 0.57.

The transformed value of 35 using z-score normalization would be 0.

Using normalization by decimal scaling, the modified value of 35 would be 0.45.

When the objective is to bring the values of the variable to a certain scale, such as 0 to 1 or -1 to 1, normalization via decimal scaling might be helpful.

Generally, To answer this question, we first need to understand the three normalization methods being asked about: min-max normalization, z-score normalization, and normalization by decimal scaling.

(a) Min-max normalization is a method of scaling a variable to a specific range, such as [0.0, 1.0]. To perform min-max normalization on the value 35 for age, we would first need to determine the minimum and maximum values for age in the data set. Let's say the minimum value for age is 18 and the maximum value is 78. To transform 35 using min-max normalization, we would perform the following calculation:

(35 - 18) / (78 - 18) = 0.57

So the transformed value of 35 using min-max normalization would be 0.57.

(b) Z-score normalization, also known as standardization, scales a variable so that it has a mean of 0 and a standard deviation of 1. To perform z-score normalization on the value 35 for age, where the standard deviation of age is 12.94 years, we would use the following calculation:

(35 - mean) / standard deviation = (35 - 35) / 12.94 = 0

So the transformed value of 35 using z-score normalization would be 0.

(c) Normalization by decimal scaling scales a variable so that the maximum absolute value is scaled to a specific number, such as 1 or 10. To perform normalization by decimal scaling on the value 35 for age, we would need to determine the maximum absolute value for age in the data set. Let's say the maximum absolute value for age is 78. To transform 35 using normalization by decimal scaling, we would perform the following calculation:

35 / 78 = 0.45

So the transformed value of 35 using normalization by decimal scaling would be 0.45.

d) As for which method to prefer, it depends on the context and the specific goals of the data analysis. Min-max normalization can be useful when the specific range [0.0, 1.0] is desired, or when the data contains outliers that should be included in the transformation. Z-score normalization can be useful when the goal is to compare the values of the variable to a standard normal distribution, or when the mean and standard deviation of the variable are meaningful in the context of the analysis. Normalization by decimal scaling can be useful when the goal is to bring the values of the variable to a specific scale, such as 0 to 1 or -1 to 1.

In general, it is important to consider the characteristics of the data and the goals of the analysis when deciding which normalization method to use.

Read more about min-max normalization

https://brainly.com/question/19475063

#SPJ1

Malware, software designed to interfere with the normal functioning of a computer, consists of viruses, Trojan horses, and other destructive agents that attackers use to infect systems and networks and gain access to sensitive information. A general term for computer programs.

Is Malware a Virus or No?

All computer viruses are malware, but not all malware is a virus. Viruses are just one type of malware. You'll hear many people use the two terms interchangeably, but technically viruses and malware are not the same thing.

Can I remove malware?

Windows Security is a powerful scanning tool that finds and removes malware from your PC. How to scan your PC using Windows 10. important:

Save any open files and close apps and programs before using Windows Defender Offline.

To know more about Malware visit;

https://brainly.com/question/14276107

#SPJ4

The return statement is absent from the code above. The return keyword in Java causes a method to return its value. When the keyword is found, the method will immediately return the value.

Returning control to the caller function puts an end to a function's execution. At the instant following the call, execution picks back up in the caller function. A value may be returned to the caller function with a return statement.

A return statement with an expression should be present in a function that returns values. The compiler gives a warning if an expression is missing from the return statement of a function with a non-void return type.

To know more about return statement visit :-

https://brainly.com/question/24279785

#SPJ4

The following is the Euclidean algorithm for determining GCD(A,B): Since GCD(0,B)=B if A = 0, we can halt if GCD(A,B)=B. Since GCD(A,0)=A and we can halt if B = 0, GCD(A,B)=A. A is written as A = BQ+R, the quotient remainder form.

Finding the greatest common divisor of two positive integers, a and b, can be done using the Euclidean algorithm. Let me start by demonstrating the calculations for a=210 and b=45. 45 times 210 equals 4, leaving 30 as the remaining.

This is a certifying method since only the gcd can satisfy the equation and divide the inputs at the same time.

To know more about algorithm visit:-

https://brainly.com/question/22984934

#SPJ4

Frequently, offers on websites include a button which must be clicked by the user with his or her mouse to indicate acceptance; clicking the button denotes that offer has been accepted. (True)

There is a virtually limitless range of websites, such as e-commerce sites, news sites, forums, graphic sites, educational sites, and so on. A website's pages typically contain a combination of text and other types of media. However, the design of a website is not constrained by any rules.

A person could make a website that is solely composed of black and white images of roses, or they could link the word "cat" to the word "mouse" on another Web page. However, a lot of websites have a standard layout with a homepage that links to different sections and content within the website.

Learn more about website

https://brainly.com/question/28431103

#SPJ4

The given statement which is true about the given code is (E) stud.GetDetails();.

What is a GetDetails() function?

In C, the built-in method gets() is used to read a string or a line of text. and save the input into a string variable with clear parameters.

Once it detects a newline character, the function ends its reading session.

Compare the results to the output from the scanf() function.

So, we can see that three objects of the Student class are generated in the code: newStud, stud, and oldStud, each with their own memory addresses.

In other words, for newStud and stud, the value of the data element in the Student class may differ.

Despite the fact that all objects have access to the GetDetails() function, only the stud object actually called the function. GetDetails();

Three objects of the Student class have been generated, and each of them has a unique memory location.

The only object of the type Student for which the GetDetails() function is used is a stud.

Therefore, the given statement which is true about the given code is (E) stud.GetDetails();.

Know more about the GetDetails() function here:

https://brainly.com/question/15688380

#SPJ4

Correct question:
Consider a class Student. The following code is used to create objects and access their member functions. Which statement is true about the code?

a. int main() {

b. Student newStud;

c. Student stud;

d. Student oldStud;

e. stud.GetDetails();

f. return 0;}

Using the knowledge of computational language in python it is possible to write code that repeatedly prompts a user for integer.

largest = None

smallest = None

while True:

import math

print(math.pi)

print(math.cos(math.pi))

print(math.exp(10))

print(math.log10(1000))

print(math.sinh(1))

print(math.factorial(6))

elif n < smallest:

smallest = n

if largest is None:

largest = n

elif n > largest:

largest = n

print("Maximum is", largest)

print ("Minimum is", smallest)

See more about python at brainly.com/question/18502436

#SPJ1