To prepare the desired solution, the mass of the solute (sucrose) must be calculated based on the desired percentage concentration and the total mass of the solution.
To prepare a 15% by mass solution with a total mass of 650g, the mass of sucrose needed to be dissolved into water is 97.5 grams. This can be calculated by multiplying the total mass of the solution by the percent by mass concentration as shown below:
Mass of sucrose = 15% x 650g = 97.5g.
Therefore, 97.5g of sucrose needs to be dissolved into water to prepare a 15% by mass solution with a total mass of 650g.
To prepare a 15% by mass solution with a total mass of 650g, 97.5 grams of sucrose needs to be dissolved into water. This is determined by multiplying the total mass of the solution (650g) by the percentage by mass concentration (15%). The resulting mass of sucrose (97.5g) is then dissolved into the water to make the solution.
In conclusion, to prepare the desired solution, the mass of the solute (sucrose) must be calculated based on the desired percentage concentration and the total mass of the solution.
To know more about solute visit:
brainly.com/question/7932885
#SPJ11
um...id.k how to do chemistry...help please?
Answer:
NaBr
Explanation:
Answer:
um...id.k how to do chemistry...help please?
Explanation:
NaBr
Which of the following statements is true about a galvanic cell that has an E value of 1.00V? 1. The reaction is spontaneous. II. At equilibrium K = 1. III. It has a negative AGO. a. I only b. II only C. III only d. I and II e. I and III 21. What species is produced by a beta emission by magnesium-27? a. 22Mg b. Mg c. 15A1 d. 23A e. None
The correct statement which are true about a galvanic cell that has an E value of 1.00V are The reaction is spontaneous and It has a negative ΔG°. Hence, the correct option is e. The species produced by a beta emission by magnesium-27 is no specific isotope or element. Hence, the correct option is e.
A galvanic cell with an E value of 1.00V indicates that the cell reaction is spontaneous. The E value represents the cell potential, and a positive E value indicates that the reaction will proceed spontaneously in the forward direction.
At equilibrium, the cell potential would be zero (E = 0), but the given cell has an E value of 1.00V. Therefore, statement II is incorrect. The equilibrium constant (K) is not necessarily equal to 1 in a galvanic cell.
The ΔG° (standard Gibbs free energy change) is related to the E value of the cell by the equation: ΔG° = -nFΔE°, where n is the number of moles of electrons transferred and F is the Faraday constant. Since the E value is positive (1.00V), the ΔG° will be negative, indicating that the cell reaction is thermodynamically favorable. Therefore, statement III is true.
Therefore, the correct answer is e. I and III.
The beta emission by magnesium-27 (27Mg) would result in the production of an electron (β- particle). Therefore, the correct answer is e. None. No specific isotope or element is produced by the beta emission of magnesium-27.
To know more about galvanic cell here
https://brainly.com/question/29784730
#SPJ4
why is there most absorbance when the solution and beam colors are different?
The reason behind the most absorbance when the solution and beam colors are different is due to the absorption spectrum.
The absorption spectrum is the range of electromagnetic radiation that a substance can absorb, and it's unique to every substance. When a beam of light passes through a substance, the substance's molecules absorb some of the light's energy.
This means that some of the light is lost, and the rest is transmitted. The amount of energy absorbed by the substance is dependent on the wavelength of the light and the substance's properties.The color of a substance is due to its ability to absorb some wavelengths of light and reflect others.
For example, a blue object reflects blue light and absorbs all other colors of light. When a blue solution is exposed to a beam of orange light, the blue solution will absorb the orange light, causing the solution to appear darker and resulting in high absorbance.
This phenomenon is known as complementary colors and is seen when a solution and a beam of light are different colors, leading to high absorbance of light.
To know more about absorption spectrum click on below link:
https://brainly.com/question/31230618#
#SPJ11
The kidneys help the body preserve water. When an animal has not had enough to drink, the kidneys signal the body to absorb water. The animal produces little urine, so it loses less water. During this process, the kidneys work in conjunction with which body system?
Answer:
This regulatory mechanism is in conjunction with the endocrine system, particularly in the posterior pituitary gland. This is related in the secretion of vasopressin or antidiuretic hormone (ADH). In the event of dehydration or extreme thirst, the body will conserve as much fluid as possible and the posterior pituitary will secrete more ADH that will signal the kidney to reabsorb more water in the collecting tubules.
A 295-g aluminum engine part at an initial temperature of 13.00 degrees Celsius absorbs 75.0 kJ of heat. What is the final temperature (in degrees Celsius) of the part? (c of Al = 0.900 J/g
K)
The final temperature of the aluminum engine part is approximately 284.19 degrees Celsius.
To determine the final temperature of the aluminum engine part, we can use the equation:
q = m × c × ΔT
Where:
q is the heat absorbed (in J)
m is the mass of the aluminum part (in g)
c is the specific heat capacity of aluminum (in J/g·K)
ΔT is the change in temperature (in K)
First, let's convert the mass of the aluminum part from grams to kilograms:
295 g = 0.295 kg
We are given the heat absorbed as 75.0 kJ, which is equal to 75,000 J.
Now, let's rearrange the equation to solve for ΔT:
ΔT = q / (m × c)
Substituting the values:
ΔT = 75,000 J / (0.295 kg × 0.900 J/g·K)
Calculating ΔT:
ΔT = 271.19 K
To find the final temperature, we need to add the change in temperature to the initial temperature:
Final temperature = Initial temperature + ΔT
Final temperature = 13.00°C + 271.19 K
Converting back to Celsius:
Final temperature = 284.19°C
Therefore, the aluminum engine part's ultimate temperature is approximately 284.19 degrees Celsius.
To know more about the Initial temperature, here
https://brainly.com/question/27326562
#SPJ4
hello BEANS would you like to play a game knok knok
Answer:
Maybe later, not right now. Tell you when.
hot cheetos hot cheetossss
Please help I'm so confused!! Turn the following Aufbau Diagrams into Ions
A coffee cup calorimeter with a heat capacity of 6. 70 J/∘ C was used to measure the change in enthalpy of a precipitation reaction. A 50. 0 mL solution of 0. 360 M AgNO3 was mixed with 50. 0 mL of 0. 540 M KSCN. After mixing, the temperature was observed to increase by 4. 06∘C. Calculate the enthalpy of reaction, ΔHrxn, per mole of precipitate formed (AgSCN). Assume the specific heat of the product solution is 4. 11 J / (g⋅∘C) and that the density of both the reactant solutions is 1. 00 g/mL. Calculate the theoretical moles of precipitate formed from AgNO3 and KSCN. Moles of precipitate formed from AgNO3: mol moles of precipitate formed from KSCN: mol Calculate the heat change experienced by the calorimeter contents, ????contents. ????contents= J Calculate the heat change expierenced by the calorimeter contents, ????cal. ????cal= J Calculate the heat change produced by the solution process, ????solution. ????solution= J Calulate ΔHsolution for one mole of precipitate formed. ΔHsolution= kJ/mole
A coffee cup temperature with a heat capacity of 6. 70 J/∘ C was used to measure the change in enthalpy of a precipitation reaction.The value of ΔHrxn was found to be 61.9 kJ/mol.
Calculate the enthalpy of reaction, ΔHrxn, per mole of precipitate formed (AgSCN). Assume the specific heat of the product solution is 4. 11 J / (g⋅∘C) and that the density of both the reactant solutions is 1. 00 g/mL.1. Calculation of Moles of precipitate formed from AgNO3:To find the value of ΔHrxn, we used the formula ΔHrxn = Qsolution/n, where Qsolution is the heat change produced by the solution process and n is the number of moles of AgSCN formed.
To find the value of n, we first calculated the number of moles of AgNO3 and KSCN used in the reaction using the formula n = M × V.To find the heat change produced by the solution process, we used the formula
Q = m × c × ∆T,
where Q is the heat change, m is the mass of the product solution, c is the specific heat capacity of the product solution, and ∆T is the change in temperature of the solution.The value of ΔHrxn was found to be 61.9 kJ/mol.
To know more about temperature Visit;
https://brainly.com/question/29072206
#SPJ11
There are many organ systems that make up the human body. Although most of these systems, such as the skeletal and muscular systems, are almost the same in males and females, one is very different. The male and female reproductive systems are made up of different organs, with different functions. The male reproductive system contains the _________, which _________. A. ovaries; produce eggs B. bladder; stores urine C. kidney; filters the blood D. testes; produce sperm
Answer: The male reproductive system contains the TESTES; which PRODUCE SPERM. The correct option is D
Explanation:
There are different organ systems in the human body which functions together to bring about the normal healthy status of an individual. To list but a few, these systems include:
--> skeletal and muscular system
--> Endocrine System,
--> Nervous System, and
--> REPRODUCTIVE SYSTEM
The reproductive system is made up of the male and the female reproductive system which are very different as it's consists of different organs with different functions.
The male reproductive system consists of:
--> scrotum
--> Testes
--> prostate gland
--> seminal vesicles
--> penis.
The SPERM (spermatozoa) are produced in the seminiferous tubules of the TESTES and mature as they pass through the long and convoluted epididymis, where they are stored. Therefore option D is the correct answer.
A chemical substance that is extremely stable and takes years to break down into a less toxic form would be considered to be?
A chemical substance that is extremely stable and takes years to break down into a less toxic form would be considered to be persistent. Persistence refers to the ability of a substance to resist degradation or breakdown over time.
Persistent chemicals have a long environmental or biological half-life, meaning it takes a significant amount of time for them to degrade or transform into less harmful substances.
Persistence can have negative implications because these substances can persist in the environment, accumulate in living organisms, and potentially cause adverse effects.
Examples of persistent substances include certain synthetic chemicals like some pesticides, certain industrial pollutants, and some persistent organic pollutants (POPs) such as polychlorinated biphenyls (PCBs) and certain chlorinated pesticides.
The persistence of a chemical is an important factor to consider when assessing its potential environmental and health impacts.
To know more about the Persistent chemicals refer here :
https://brainly.com/question/29222160#
#SPJ11
On a certain hot day the atmospheric pressure was 1 atm and the temperature was 37°C. On this day 1 L sample of atmospheric gases was collected and analyzed. It was found to contain among other gases 9.38 x 10-3 mol of O2 gas, 2.46 x 10-8 mol of H2 gas and 1.79 x 10-4 mol of water vapor. If you put these amounts of the three gases in a sealed 1L tank at 1 atm and 37°C, will the combustion of hydrogen gas be spontaneous at these conditions?
Answer:
Yes, the combustion of hydrogen is spontaneous from the given conditions.
Explanation:
Let look at the reaction:
[tex]2H_2_{(g)} + O_2_{(g)} \to 2H_2O_{(g)}[/tex]
[tex]K_p = \dfrac{[P(H_2O)]^2}{[P(H_2)^2\times P(O_2)]} ----- (1)[/tex]
The total pressure of the tank = 1 atm
[tex]\mathtt{Pressure \ of \ the \ gas = moles \ fraction \of \ gas \times total \ pressure}[/tex]
Thus, pressure of [tex]O_2[/tex] gas = [tex]\dfrac{9.38 \times 10^{-3} }{(9.38 \times 10^{-3} + 2.46 \times 10^{-8} + 1.79 \times 10^{-4}} \times 1 atm[/tex]
[tex]P(O_2) = 0.9813 atm[/tex]
Pressure of [tex]H_2O[/tex] gas =[tex]\dfrac{1.78 \times 10^{-4}}{9.38 \times 10^{-3} + 2.46 \times 1)^{-8} + 1.78 \times 10^{-4}} \times 1 \ atm[/tex]
Pressure of H_2 gas = [tex]2.573 \times 10^{-6} \ atm[/tex]
From equation (1);
[tex]K_p = \dfrac{(0.0187)^2}{(2.573 \times 10^{-6})^2 \times (0.913) } \\ \\ K_p = 5.383 \times 10^7[/tex]
So, applying the equation:
[tex]\Delta G^0 = -RT In K_p \\ \\ = -8.314 \times (300)K \times IN(5.383 \times 10^7) \\ \\ = -45880.109 J \\ \\ = -45.800 \ kJ\\ \\[/tex]
Thus;
[tex]\Delta G^0 < 0[/tex]
Thus, Yes the combustion of hydrogen is spontaneous from the above conditions. From thermodynamics, we realize that assuming ∆G is negative, the reaction is spontaneous. Again we understand that ∆G=∆H-T∆S. However, for combustion, water will definitely be formed.
Finally, we can conclude that;
∆H is negative;
∆S is positive; &
∆G is also negative.
Thus, from above, we conclude combustion of hydrogen is spontaneous.
The combustion of hydrogen gas with the oxygen gas for the formation of the water vapor is a spontaneous reaction.
How do we know reaction is spontaneous?To know about the condition that the given reaction is spontaneous or not we will use the below equation and must get the negative value:
ΔG° = -RTlnKp, where
R = universal gas constant
T = temperature
Kp = partial pressure constant
Firstly we have to calculate the value of Kp.
Given chemical reaction is:
2H₂(g) + O₂(g) → 2H₂O(g)
Value of Kp for the given reaction is:
Kp = [p(H₂O)]² / [p(H₂)]².[p(O₂)]
Partial pressure will be calculated as:
p = mole fraction × total pressure
Given that total pressure of gas = 1atm
p(H₂O) = (1.79×10⁻⁴ / 1.79×10⁻⁴+2.46×10⁻⁸+9.38×10⁻³) × 1 = 0.0187
p(H₂) = (2.46×10⁻⁸ / 1.79×10⁻⁴+2.46×10⁻⁸+9.38×10⁻³) × 1 = 2.573 × 10⁻⁶
p(O₂) = (9.38×10⁻³ / 1.79×10⁻⁴+2.46×10⁻⁸+9.38×10⁻³) × 1 = 0.913
Putting all these values on the equation of Kp, we get
Kp = (0.0187)² / (2.573 × 10⁻⁶)²(0.913) = 5.383 × 10⁷
Now putting values in the first equation we get,
ΔG° = -(8.314)(300)ln(5.383 × 10⁷)
ΔG° = -45,800 kJ
Hence, given reaction is spontaneous.
To know more about spontaneous reaction, visit the below link:
https://brainly.com/question/24376583
Calcular una solución que contiene 250 g de cloruro de calcio en 1500 mL de solución y tiene una decidad de 1,2gr/ml
Answer:
13.89% p/p
Explanation:
El porcentaje peso a peso de una solución (%p/p) es definido como cien veces la relación entre la masa del soluto (En este caso, cloruro de calcio) y la masa de la solución. La ecuación es:
%p/p = Masa cloruro de calcio (250g)/ Masa solución * 100
Para hallar la masa de la solución debemos usar el volumen y la densidad de este:
1500mL * (1,2g / mL) = 1800g
Así, el %p/p será:
250g / 1800g * 100
13.89% p/pin the lab there is an unmarked glass cylinder. half full with water weighs 11.6 kg. filled only a third with water weighs 10 kg. how much does the empty cylinder weight?
To determine the weight of an empty cylinder, we will consider the given information below:Half full of water cylinder weighs 11.6 kgFilled with a third of water, the cylinder weighs 10 kg.The glass cylinder is unmarked.Let's assume that the empty cylinder weighs x kg.
Since water was used to fill the cylinder, we know that the density of water is 1 g/cm³ or 1 kg/L.To find the volume of water needed to fill half of the cylinder, we will subtract the weight of the empty cylinder from the weight of the half-filled cylinder. Thus, volume of water filled in the cylinder is 11.6 kg - x kg. Since the cylinder is half-full, we will multiply the volume of water by 2, then divide by the total volume of the cylinder. Thus, we have:[tex]\frac{2\cdot(11.6kg-x kg)}{Volume}[/tex]Similarly, we can find the volume of water needed to fill a third of the cylinder using the formula above. Thus, we have:[tex]\frac{3\cdot(10kg-x kg)}{Volume}[/tex]Since the density of water is 1 kg/L, we know that the volume of water is equal to the weight of the water. Equating the two expressions, we have:2(11.6 - x) = 3(10 - x)Solving for x, we have x = 2.8 kg. Therefore, the empty cylinder weighs 2.8 kg.Answer: The empty cylinder weighs 2.8 kg.
To know more about cylinder. visit:
https://brainly.com/question/31681793
#SPJ11
Consider the reaction:
NH3 (g) + HCl (g) → NH4Cl (s)
Given the following table of thermodynamic data,
Substance NH3 (g) -46.19 192.5
HCl (g) -92.30 186.69
NH4Cl (s) -314.4 94.6
determine the temperature (in °C) above which the reaction is nonspontaneous.
a. 618.1
b. 345.0
c. This reaction is spontaneous at all temperatures.
d. 1235
e. 432.8
The correct option is a. 618.1
Given data: Substances : NH3 (g) -46.19 192.5 HCl (g) -92.30 186.69 NH4Cl (s) -314.4 94.6
We are to determine the temperature (in °C) above which the reaction is nonspontaneous.
We can determine this by calculating ΔG for the reaction.
The equation to calculate ΔG is as follows:ΔG° = ΣG°(Products) - ΣG°(Reactants) ,
From the given data, we can write:ΔG° = G°(NH4Cl) - [G°(NH3) + G°(HCl)]
Substituting the values:ΔG° = (-314.4) - [(-46.19) + (-92.30)]ΔG° = (-314.4) + 138.49ΔG° = -175.91 kJ/mol
Now we can use the equation:ΔG = ΔH - TΔS
At non-spontaneous reaction, ΔG = 0.
We can re-arrange the equation and solve for T to get the temperature at which the reaction is non-spontaneous.
T = ΔH / ΔS = (-175.91 kJ/mol) / (-192.5 J/mol-K) = 911.9 K = 638.7 °C
Therefore, the temperature above which the reaction is nonspontaneous is 638.7 °C (approx.)
Hence, the correct option is a. 618.1.
Know more about nonspontaneous reaction :
https://brainly.com/question/28855846
#SPJ11
What is the relationship between the valence electrons of an atom and the chemical bonds the atom can form?
Answer:
Valence electrons are outer shell electrons with an atom and can participate in the formation of chemical bonds. In single covalent bonds, typically both atoms in the bond contribute one valence electron in order to form a shared pair. The ground state of an atom is the lowest energy state of the atom.
convert 2.41 x 10^2 m to cm
answer choices
2.41cm
2.41 x 10^4cm
2.41 x 10^-2cm
2.41 x 10^-6cm
Answer:
2.41*10² m equals 2.41*10⁴ cm
Explanation:
The rule of three or is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them. That is, what is intended with it is to find the fourth term of a proportion knowing the other three. Remember that proportionality is a constant relationship or ratio between different magnitudes.
If the relationship between the magnitudes is direct, that is, when one magnitude increases, so does the other (or when one magnitude decreases, so does the other) , the direct rule of three must be applied. To solve a direct rule of three, the following formula must be followed:
a ⇒ b
c ⇒ x
So: [tex]x=\frac{c*b}{a}[/tex]
In this case the rule of three can be applied as follows: if 1 m equals 100 cm, 2.41*10² m equals how many cm?
[tex]cm=\frac{2.41*10^{2} m*100 cm}{1 m}[/tex]
cm= 24100 = 2.41*10⁴
2.41*10² m equals 2.41*10⁴ cm
Given a molecule of CF4. Follow the steps below to determine if the molecule i polar or nonpolar. Step 1: The C-F bonds are polar tetrahedral Step 2: The molecular geometry is Step 3: The molecule is nonpolar Determine the intermolecular forces between two molecules of CH3NH2. Select ALL that apply. dispersion forces (London dispersion forces) dipol-dipole hydrogen bonding ion-dipolc forces
Dispersion forces (London dispersion forces), dipole-dipole, and hydrogen bonding will occur between two molecules of CH3NH2.
Molecule of CF4, the molecular geometry is tetrahedral. The C-F bonds are polar and tetrahedral. The molecule is nonpolar.Intermolecular forces are forces that hold molecules together. There are three types of intermolecular forces: dispersion forces, dipole-dipole forces, and hydrogen bonding. The forces are affected by the type of molecule and the presence of polar groups. The intermolecular forces between two molecules of CH3NH2 are dispersion forces and hydrogen bonding. The correct options are:A) Dispersion forces (London dispersion forces)B) Dipole-dipoleC) Hydrogen bondingD) Ion-dipole forcesExplanation: CH3NH2 has a dipole moment, so it can participate in dipole-dipole interaction. Also, it has H atoms attached to nitrogen which makes it capable of forming hydrogen bonding. Thus, dispersion forces (London dispersion forces), dipole-dipole, and hydrogen bonding will occur between two molecules of CH3NH2.
Learn more about Dispersion forces here:
https://brainly.com/question/31326261
#SPJ11
A base is a compound that contains the ____ radical.
Answer:
hydroxyl (OH)
Explanation:
hydroxyl (OH)
Could someone please care to explain what the answer is
Calculate the percentage composition of Ca(MnO4)2.
Firstly, we see how many atoms are there for each element in the formula.
Ca= 1 atom
Mn= 2 atoms
O= 8 atoms
Next, we are going to consult our periodic table for the atomic mass of each element.
Ca= 40
Mn= 55
O= 16
Then, we have to find the molar mass for the compound..
Here is the formula for calculating molar mass of an element:
Molar Mass= ( no. of atoms of the element × atomic mass of the element)
Now, we have to calculate the atomic mass of the compound. So using the molar mass formula for an element, we calculate the molar mass for each element then we sum up their molar masses to get the compounds molar mass.
Molar mass (Ca)= 1× 40
(Ca)= 40
Molar mass (Mn)=2×55
(Mn)= 110
Molar mass (O)= 8×16
(O)= 128
Now: Molar mass( compound)= (Ca)+(Mn)+(O)
= 40+ 110 128
= 278
This is everything we need to calculate our percentage composition for each element..
* The example says to find the percentage composition for Ca. So we only find for Ca, Which is already done using the formula and the answer is 14.39%.
To prove that your answer is correct, find the percentage composition for Mn and O as well. Then you add up their percentage compositions.
If you do and you get 100 as your answer, then your percentage compositions are correct.
Why don't you try finding the percentage composition for Mn and O, then add up all the three percentage compositions. If you 100 as their sum, then your percentage composition for each of the elements are correct.
Helpppp meeeeee plssss
Answer:
A
Explanation:
the answer is A because when your working cooperative people are helping you and non cooperative is where people are working against you by them selves
AQRS is an isosceles triangle. What is the length of RT
? Round to the nearest hundredth. Enter your answer in the box.
11 cm
a
T 6cm s
Answer:
Length of RT = 9.22 cm to the nearest hundredth
Explanation:
Considering the image up in the attachment, ΔRST is a right-angled triangle.
The length of two sides of ΔRST is given as 11cm and 6 cm. The length of the third side which is RT can be obtained using Pythagoras ' rule which says that the sum of the squares of two sides of a right-angled triangle is equal to the square of the hypotenuse.
This rule is given as: c² = b² + a² where c is the hypotenuse and a and b are the other two sides of the right-angled triangle.
In ΔRST, the length of the hypotenuse = 11 cm, the length of one of the two sides = 6cm, length of RT = x
Solving for x: (11 cm)² = (x cm)² + (6 cm)²
(x cm)² = 121 cm² - 36 cm²
(x cm)² = 85 cm²
x cm = √85
x = 9.22 cm to the nearest hundredth
Therefore, length of RT = 9.22 cm to the nearest hundredth
Predict whether or not the following compounds would be more soluble in an acidic solution, a basic solution, or whether pH would have little to no effect on its solubility. A. AgBr Select] B. LiF [Select] C. Ca(OH)2 [Select ] D. Fel: [Select ]
Answer: A. AgBr: pH would have little to no effect on its solubility.
B. LiF: pH would have little to no effect on its solubility.
C. Ca(OH)2: more soluble in a basic solution.
D. FeI3: more soluble in an acidic solution.
Explanation:)
Solubility of AgBr, LiF, Ca(OH)2, FeI2 based on acidic, basic, or neutral pHThe pH of the solution has an effect on the solubility of several compounds. Salts of weak acids or bases dissolve more in a basic or acidic environment, respectively, than in neutral water.
On the other hand, salts of strong acids and bases are mostly soluble in water and are not affected by the pH of the solution. The solubility of the given compounds will be affected as follows:AgBr: AgBr will dissolve more in an acidic solution because it is an ionic compound of a weak acid HBr. The equation for the dissociation of HBr is HBr⇌H+ + Br-. When the pH is reduced, H+ concentration increases, leading to the reaction moving to the left, ultimately resulting in the formation of more HBr. LiF: LiF is a salt of a strong acid (hydrofluoric acid) and a strong base (lithium hydroxide). Its solubility will not be affected by pH since it is mostly soluble in water.Ca(OH)2: Calcium hydroxide is a salt of a strong base (calcium oxide) and a strong acid (water). Its solubility will not be influenced by pH since it is mostly soluble in water.FeI2: Iron (II) iodide is an ionic compound with a weak acid (HI) and a strong base (Fe(OH)2). Its solubility would increase in an acidic environment. Since I- is a weak conjugate base of HI, the equation for the dissociation of HI would shift to the left in the presence of H+ ions in the acidic solution. Hence FeI2 will dissolve more in an acidic environment.
To know more about compound visit:
https://brainly.com/question/31500396
#SPJ11
A direct current power supply of low voltage (less than 10 volts) has lost the markings that indicate which output terminal is positive and which is negative. A chemist suggests that the power supply terminals be connected to a pair of platinum electrodes that dip into 0.1-molar KI solution. Which of the following correctly identifies the polarities of the power supply terminals? (A) A gas will be evolved only at the positive electrode. Correct or incorrect? Explanation: (B) A gas will be evolved only at the negative electrode. Correct or incorrect? Explanation: (C) A brown color will appear in the solution near the negative electrode. Correct or incorrect? Explanation: (D) A metal will be deposited on the positive electrode. Correct or incorrect? Explanation: (E) None of the methods above will identify the polarities of the power supply terminals.
A direct current power supply of low voltage (less than 10 volts) has lost the markings that indicate which output terminal is positive and which is negative. A chemist suggests that the power supply terminals be connected to a pair of platinum electrodes that dip into 0.1-molar KI solution. Only (B) A gas will be evolved only at the negative electrode correctly identifies the polarities of the power supply terminals.
When the power supply terminals are connected to a pair of platinum electrodes dipping into a 0.1-molar KI solution, the electrolysis of the solution will occur. In the process of electrolysis, the positive electrode (anode) attracts negatively charged ions (anions) and the negative electrode (cathode) attracts positively charged ions (cations).
In this case, when a gas is evolved, it indicates that reduction is occurring at the electrode. The gas evolved will be hydrogen gas (H₂) from the reduction of H⁺ ions in the KI solution.
Since hydrogen gas is evolved only at the negative electrode (cathode), the correct identification of the polarities of the power supply terminals is that a gas will be evolved only at the negative electrode.
To know more about direct current here
https://brainly.com/question/30940926
#SPJ4
calculate the linear atomic density in atoms per millimeter for the following directions in bcc tantalum, which has a lattice constant of 0.33026nm: (a) [100], (b) [110], (c) [111]
The linear atomic density in atoms per millimeter can be calculated for different crystallographic directions in bcc tantalum, which has a lattice constant of 0.33026 nm. The linear atomic density for the [100], [110], and [111] directions can be determined by dividing the number of atoms along the direction by the length of the direction.
The linear atomic density in atoms per millimeter can be calculated by dividing the number of atoms along a specific crystallographic direction by the length of that direction. In bcc (body-centered cubic) crystals, there are specific arrangements of atoms along different crystallographic directions.
(a) For the [100] direction, there is one atom per unit cell. The length of the [100] direction can be determined using the lattice constant, which is 0.33026 nm. Therefore, the linear atomic density for the [100] direction is 1 atom / (0.33026 nm) = 3.027 atoms/nm or 30.27 atoms/mm.
(b) For the [110] direction, there are two atoms per unit cell. The length of the [110] direction can be calculated by multiplying the lattice constant by the square root of 2. Therefore, the linear atomic density for the [110] direction is 2 atoms / (0.33026 nm √2) = 6.054 atoms/nm or 60.54 atoms/mm.
(c) For the [111] direction, there are three atoms per unit cell. The length of the [111] direction can be calculated by multiplying the lattice constant by the square root of 3. Therefore, the linear atomic density for the [111] direction is 3 atoms / (0.33026 nm √3) = 9.090 atoms/nm or 90.90 atoms/mm.
Thus, the linear atomic density in atoms per millimeter for the [100], [110], and [111] directions in bcc tantalum are approximately 30.27 atoms/mm, 60.54 atoms/mm, and 90.90 atoms/mm, respectively.
Learn more about atoms here: https://brainly.com/question/29712088
#SPJ11
Calculate the number of grams of solute in 500.0 mL of 0.179 M KOH. A) 5.02 g B) 1.60 g C) 5.02 x103 g D) 157 g
The mass (in grams) of solute in 500 mL of 0.179 M potassium hydroxide, KOH solution is 5.02 grams (option A)
How do i determine the mass of KOH?First, we shall obtain the mole of KOH in the solution. Details below:
Volume = 500 mL = 500 / 1000 = 0.5 LMolarity = 0.179 MMole of KOH =?Mole of solute = molarity × volume
Mole of KOH = 0.179 × 0.5
Mole of KOH = 0.0895 mole
Finally, we shall determine the mass of solute, KOH in the solution. Details below:
Mole of KOH = 0.0895 moleMolar mass of KOH = 56.1 g/molMass of KOH = ?Mass = Mole × molar mass
Mass of KOH = 0.0895 × 56
Mass of KOH = 5.02 grams
Therefore, the mass of KOH present in the solution is 5.02 grams (option A)
Learn more about mass:
https://brainly.com/question/21940152
#SPJ4
If you have 35 moles of sodium hydroxide (NaOH) in a 5000 mL solution, what is the concentration of the NaOH in the solution?
Answer:
7 mol.dm^3
Explanation:
formula for calculating concentration: C = n/v
Start by changing 5000ml solution to dm^3 because volume is in dm^3
1 ml = 1cm^3
then from a cm^3 to dm^3 you divide by 1000
5000ml = 5000cm^3
5000÷1000= 5dm^3
c = n/v
= 35/5
= 7mol.dm^3
which of the following elements has the lowest first ionization eneygy A, potassium B, sodium C, calcium D, Argon
Answer:
Argon
Explanation:
Because, it is positioned down on the periodic table
Answer:
Argon
Explanation:
Why might changes to an environment cause an organism’s population to decrease?
please help me i need this good grade
Guys please help me ill give brainily points
When an apple is cut open and left out on a table in your kitchen it turns brown over
time when oxygen reacts with the apple. Describe what happens to oxygen atoms in
order to make O2 instead of 0 +2 i
Answer:
Alright, We all know fruits contains enzyme, so there is a reaction name enzymic browning! Actually what happens when we cut the apple and keep it open the organic enzyme molecules starts reacting with oxygen of surroundings and oxidises it!