What type of energy is used to crush dried corn
bauons
with a mortar and pestle?

The pan made of copper will require more energy to heat the water to 100°C because of its lower specific heat capacity.

The particular intensity limit of a substance is how much intensity energy expected to raise the temperature of 1 kilogram of the substance by 1 degree Celsius. Copper has a particular intensity limit of 0.39 J/g°C, while iron has a particular intensity limit of 0.45 J/g°C.

This implies that iron requires more energy to warm up contrasted with copper, given a similar mass of every substance. Be that as it may, for this situation, the two container have a similar mass, so the dish made of copper will require more energy to warm the water to 100°C, as copper has a lower explicit intensity limit than iron.

In this way, it will take more energy to warm up a similar measure of water in the copper dish than in the iron skillet.

To learn more about energy to heat, refer:

https://brainly.com/question/28030503

#SPJ4

the Roche limit of the moon in terms of the radius of the Earth is approximately 2.36 times the radius of the Earth.

The Roche limit is the distance from a planet or moon within which tidal forces will overcome the gravitational force holding an object together, causing it to disintegrate. To solve for the Roche limit of the moon in terms of the radius of the Earth, we can use the equation:

r = 1.26 * (density of the moon/density of the Earth)^(1/3) * radius of the moon

where r is the Roche limit, and the density of the moon and the radius of the moon are known values. However, we need to express this equation in terms of the radius of the Earth, re.

We can use the fact that the radius of the moon (rm) is approximately 1/4 the radius of the Earth (re) to substitute for the radius of the moon in the equation above:

r = 1.26 * (density of the moon/density of the Earth)^(1/3) * (1/4) * re

We know that the density of the moon is about 3.34 g/cm^3, and the density of the Earth is about 5.52 g/cm^3. Substituting these values into the equation, we get:

r = 1.26 * (3.34/5.52)^(1/3) * (1/4) * re
r ≈ 9.44 * 10^4 km * (1/4) * re
r ≈ 2.36 * 10^4 km * re

Therefore, the Roche limit of the moon in terms of the radius of the Earth is approximately 2.36 times the radius of the Earth.

To learn more about gravitational force click here

brainly.com/question/12528243

#SPJ11

Complete Question

solve for r, the roche limit of the moon, in terms of the radius of the earth, re

where r stands for roche limit and e stands for the earth.

The standard deviation of the possible positions of the mathematician is approximately 2.45 meters.

A. After flipping the coin three times, the possible positions of the mathematician are X=3, X=1, X=-1, and X=-3. The microstates for each outcome are:

X=3: RRR (3 steps to the right)

X=1: RRL, RLR, LRR (2 steps to the right and 1 to the left)

X=-1: LRR, RLR, RRL (2 steps to the left and 1 to the right)

X=-3: LLL (3 steps to the left)

B. The probability Prob(X) of each macrostate can be calculated using the binomial distribution. The probability of getting k heads in n coin tosses with probability p of getting heads in a single toss is given by:

[tex]P(k) = (n\: choose\: k) * p^k * (1-p)^{(n-k)[/tex]

Using this formula, the probabilities for each macrostate are:

Prob(X=3) = P(3) = (3 choose 3) * [tex]0.5^3[/tex] = 0.125

Prob(X=1) = P(2) + P(1) = (3 choose 2) * 0.5^3 + (3 choose 1) * [tex]0.5^3[/tex]  = 0.375

Prob(X=-1) = P(1) + P(2) = (3 choose 2) * [tex]0.5^3[/tex]  + (3 choose 1) * [tex]0.5^3[/tex] = 0.375

Prob(X=-3) = P(0) = (3 choose 0) * [tex]0.5^3[/tex] = 0.125

C. To find the mean position (x), we can use the formula:

x = sum(X * Prob(X)) for all possible values of X

Using the probabilities from part B, we get:

x = 30.125 + 10.375 - 10.375 - 30.125 = 0

To find [tex](x)^2[/tex] and [tex](x^2)[/tex], we use the formulas:

(x)^2 = sum([tex]X^2[/tex] * Prob(X)) for all possible values of X

(x^2) = sum([tex]X^2[/tex] * Prob(X)) for all possible values of X

Using the probabilities from part B, we get:

[tex](x)^2 = 3^{20.125} + 1^{20.375} + (-1)^{20.375} + (-3)^{20.125} = 2\\\\(x^2) = 3^{20.125} + 1^{20.375} + (-1)^{20.375} + (-3)^{20.125} = 8[/tex]

D. To find the standard deviation (Oy), we use the formula:

[tex]Oy = \sqrt{[(x^2) - (x)^2][/tex]

Using the values of (x)^2 and (x), we get:

[tex]Oy = \sqrt{[8 - 2]} = \sqrt{(6)} = 2.45[/tex]

Standard deviation is a statistical measure that indicates the extent to which the values in a dataset deviate from the average or mean value. It measures the variability or dispersion of the data points from the mean. A higher standard deviation indicates that the data points are more spread out from the mean, while a lower standard deviation indicates that the data points are clustered more closely around the mean.

Standard deviation is used in a variety of fields, including finance, engineering, and science, to analyze and interpret data. It is particularly useful in describing the distribution of data and in making predictions based on probability theory. The standard deviation is often used in conjunction with other statistical measures, such as the mean and variance, to provide a more comprehensive understanding of the data.

To learn more about Standard deviation visit here:

brainly.com/question/23907081

#SPJ4

This program will output the following:

0

1

2

4

5

Which python program that prints all the numbers?

Here's an example Python program that prints all the numbers from 0 to 6 except for 3 and 6 using a for loop:

for i in range(7):

   if i == 3 or i == 6:

       continue

   print(i)

In this program, we use the range() function to create a sequence of numbers from 0 to 6. We then loop through each number using a for loop.

Inside the loop, we use an if statement to check if the current number is equal to 3 or 6. If it is, we use the continue statement to skip over the rest of the loop and move on to the next iteration. If the current number is not equal to 3 or 6, we use the print() function to print the number.

This program will output the following:

0

1

2

4

5

Learn more about output

brainly.com/question/4347228

#SPJ11

The resistor of the electric lamp is marked at 240 volts and 60 watts is 960 ohms. Thus, option D is correct.

The resistance is a property that gives obstruction the current flow.  It blocks the current flow in the circuit. The unit of resistance is the ohm.    

From the given,

The voltage of the electric lamp (E) = 240 volt

Power in the circuit (P) = 60 watt

Resistance =?

Power (P) = E² / R

R = E²/P

   = 240×240/60

  = 960 Ω

The resistance of the electric lamp with a given voltage and power is 960 Ω. Thus, the ideal solution is D.

To learn more about resistance and power:

https://brainly.com/question/14856965

#SPJ1

The charge of electrode is 12.4 pC. The potential difference between the electrodes is 9.0 V. The charge on each electrode is 12.4 pC. The potential difference between the electrodes is 0.017 V.

The capacitance between the electrodes can be calculated as C = εA/d, where ε is the permittivity of free space, A is the area of each electrode, and d is the distance between them. Plugging in the given values, we get C = (8.85 × 10^-12 F/m)(0.05 m × 0.05 m)/(0.0016 m) = 1.38 × 10^-9 F. The charge on each electrode is Q = CV, where V is the potential difference between the electrodes. Therefore,

Q = (1.38 × 10^-9 F)(9.0 V) = 1.24 × 10^-8 C = 12.4 pC.

The potential difference between the electrodes is simply the voltage of the battery, which is 9.0 V. When the plates are pulled apart to a new spacing of 2.4 mm, the capacitance between them changes to C' = εA/d' = (8.85 × 10^-12 F/m)(0.05 m × 0.05 m)/(0.0024 m) = 7.34 × 10^-10 F. The charge on each electrode remains the same, so Q = 12.4 pC.

The potential difference between the electrodes can be calculated as V' = Q/C' = (12.4 × 10^-12 C)/(7.34 × 10^-10 F) = 0.017 V.

To know more about capacitance, here

brainly.com/question/28445252

#SPJ4

The force on the -8.0 µC charge based on the information is -10 N.

It should be noted that to calculate the electric field at a distance of 6.0 mm away from a +3.0 μC charge, we can use the Coulomb's law equation:

Electric field (E) = k * (q / r^2)

So the electric field at a distance of 6.0 mm away from the +3.0 μC charge is:

E = 9 x 10^9 * (3.0 x 10^-6) / (0.0060)^2

E = 1.25 x 10^9 N/C

Now, to calculate the force on a -8.0 µC charge placed at this point, we can use the equation:

Force (F) = q * E

Where:

q = -8.0 μC (the charge of the test charge)

E = 1.25 x 10^9 N/C (the electric field at this point)

So the force on the -8.0 µC charge is:

F = (-8.0 x 10^-6) * (1.25 x 10^9)

F = -10 N

Learn more about electric on

https://brainly.com/question/24786034

#SPJ1

The spring is exerting a force of 350 N in the opposite direction of the compression.

The strength of the force that the spring is exerting can be calculated using Hooke's Law, which states that the force exerted by a spring is directly proportional to its displacement from its equilibrium position:

F = -kx

where F is the force exerted by the spring, k is the spring constant, and x is the displacement from the equilibrium position.

In this case, the spring constant is given as k = 2500 N/m, and the spring has been compressed by x = 14 cm = 0.14 m. Therefore, the force exerted by the spring is:

F = -kx = -(2500 N/m)(0.14 m) = -350 N

Note that the negative sign indicates that the force is directed in the opposite direction to the displacement of the spring, in accordance with Hooke's Law. So the spring is exerting a force of 350 N in the opposite direction of the compression.

Visit to know more about Spring:-

brainly.com/question/14670501

#SPJ11

Answer:

The force of buoyancy is the upward force exerted on an object immersed in a fluid (liquid or gas) due to the difference in pressure between the bottom and the top of the object. This force is equal to the weight of the fluid displaced by the object, and it acts in the opposite direction to the force of gravity.

Therefore, the correct answer is D) It pushes upward.

Explanation:

a) The magnitude of the current in the second wire is 0.053 A.

b) The direction of the current in the second wire is downward.

a)The magnitude of the current in the second wire can be found using the formula for the magnetic force between two parallel wires:

F = μ₀ * I₁ * I₂ * L / (2πd)

where F is the force per unit length, μ₀ is the permeability of free space, I₁ is the current in the first wire, I₂ is the current in the second wire, L is the length of the wires, and d is the distance between them.

Plugging in the given values, we get:

8.3×10−4 N/m = 4π×10⁻⁷ T·m/A * 27 A * I₂ * 1 m / (2π*0.065 m)

Simplifying, we get:

I₂ = (8.3×10⁻⁴ * 0.065) / (4π×10⁻⁷ * 27) = 0.053 A

b) The direction of the current in the second wire can be determined using the right-hand rule for the magnetic field. If we point the thumb of our right hand in the direction of the current in the first wire (upward), and curl our fingers towards the second wire, the direction of the magnetic field created by the first wire will be perpendicular to the plane of our hand, pointing towards us. To create an attractive force between the two wires, the direction of the magnetic field created by the second wire must be in the opposite direction, so the current in the second wire must be in the opposite direction to the first wire (i.e. downward).

Here you can learn more about magnitude

https://brainly.com/question/14526577#

#SPJ11  

The force exerted on one side of the paper by the atmosphere is 5,836 newtons.

To calculate the force exerted on one side of the paper by the atmosphere, we need to know the pressure of the atmosphere. At standard atmospheric pressure (1 atm), the force exerted is approximately 101,325 newtons per square meter.

To convert this to the force exerted on our sheet of paper, we need to convert the dimensions to meters:

8.05 in = 0.2045 m
11.1 in = 0.2819 m

The area of the paper is then:

A = (0.2045 m) x (0.2819 m) = 0.0576 m^2

Multiplying the area by the pressure gives us the force exerted:

F = (101,325 N/m^2) x (0.0576 m^2) = 5,836 N

Therefore, the force exerted on one side of the paper by the atmosphere is approximately 5,836 newtons.

Know more about Force here:

https://brainly.com/question/16556212

#SPJ11

The direction of the Lorentz force on a charged particle moving in a magnetic field is given by the cross product of the velocity of the particle and the magnetic field vector.

The Lorentz force is perpendicular to both the velocity and the magnetic field.

In this case, the shark is swimming at a steady speed of 1.5 m/s with its head perpendicular to the earth's magnetic field, which is pointing straight downward. Therefore, the velocity of the shark is perpendicular to the magnetic field.

Since the velocity of the shark is perpendicular to the magnetic field, the Lorentz force will be perpendicular to both and will act on any charged particles in the water around the shark. This force will cause the charged particles to move to one side of the shark's head, creating an electric dipole.

The direction of the electric dipole will be determined by the direction of the Lorentz force. Using the right-hand rule, we can determine that the Lorentz force will act to the right of the shark's head. This means that the left side of the shark's head will become positively charged, while the right side will become negatively charged.

Therefore, the left side of the shark's head is positively charged.

Learn more about  speed   here:

https://brainly.com/question/28224010

#SPJ11

To find the wavelength of a quantum of light with frequency of 6.63 x 10^32 sec, we can use the equation: wavelength = (velocity of light)/(frequency) Plugging in the values given, we get: wavelength = (6.63 x 10^36 m/sec)/(6.63 x 10^32 sec) wavelength = 10^4 meters Therefore, the wavelength of a quantum of light with frequency of 6.63 x 10^32 sec is 10^4 meters.

The correct values are: Planck's constant (h) = 6.63 x 10^-34 Js, and the velocity of light (c) = 3 x 10^8 m/s.
To find the wavelength of a quantum of light with a given frequency (v), we can use the following equation:
Energy (E) = h × v
Additionally, we know that the energy of a photon is also given by:
E = (h × c) / λ, where λ is the wavelength.
Combining these two equations, we get:
h × v = (h × c) / λ
To find the wavelength, we can rearrange the equation:
λ = (h × c) / (h × v)
Now, plug in the given values:
λ = (6.63 x 10^-34 Js × 3 x 10^8 m/s) / (6.63 x 10^-34 Js × 6.63 x 10^32 s^-1)
λ ≈ (3 x 10^8 m/s) / (6.63 x 10^32 s^-1)
λ ≈ 4.52 x 10^-25 m
So, the wavelength of a quantum of light with a frequency of 6.63 x 10^32 s^-1 is approximately 4.52 x 10^-25 meters.

Learn more about wavelength  here:

https://brainly.com/question/20711198

#SPJ11

The real power in this circuit is 5.657 watts.

The real power (P) is given by:

P = Veff Ieff cosθ

where Veff is the effective voltage, Ieff is the effective current, and θ is the phase angle between the voltage and current.

To find Veff and Ieff, we need to first determine the root-mean-square (rms) values of the voltage and current:

Vrms = Vmax / √2 = 8 / √2 = 5.657 V

Irms = Imax / √2 = 2 / √2 = 1.414 A

where Vmax and Imax are the maximum values of the voltage and current, respectively.

To find the phase angle, we need to compare the phase angles of the voltage and current. The voltage is given as v(t) = 8 cos(ωt) and has no phase shift, so its phase angle is 0°. The current is given as i(t) = 2 cos(ωt π/6), which has a phase shift of π/6 or 30°. Therefore, the phase angle between the voltage and current is θ = 0° - 30° = -30°.

Finally, we can calculate the real power as:

P = Veff Ieff cosθ

= (5.657 V) (1.414 A) cos(-30°)

= 5.657 W

To know more about real power click on below link:

https://brainly.com/question/14395949#

#SPJ11

The statements are true:

a. The penguin's image moves from infinity to the focal point.

d. The height of the image increases continuously.

Therefore, options a and d are true.

When an object moves along the central axis of a concave mirror from the focal point to an effectively infinite distance, its image moves from infinity to the focal point. The height of the image increases continuously as the object moves away from the mirror.

The movement of the image is not complicated, so options c and f are false.

The image does not move from the focal point to infinity, so option b is false. The height of the image does not decrease, so option e is false.

Learn more about concave mirror at

https://brainly.com/question/3555871

#SPJ11

The negative sign indicates that the induced emf is in the opposite direction to the change in magnetic flux.

The average current in the solenoid during this time interval is (0 + 4.3)/2 = 2.15 A. Therefore, the rate of change of the magnetic flux through the short coil is:

dΦ/dt = [tex]\pi * r^2 * mu_0 * n * (4.3 - 0) / 0.65[/tex]

where r is the radius of the solenoid, n is the number of turns per unit length of the solenoid, and 4.3 - 0 is the change in current during the time interval of 0.65 seconds.

dΦ/dt = [tex](\pi) * (1.3 cm)^2 * (4 * \pi * 10^{-7} T m/A) * (800 turns/m) * (4.3 A - 0 A) / 0.65 s[/tex]

dΦ/dt = [tex]1.29 \times 10^{-5} Wb/s[/tex]

emf = -dΦ/dt = [tex]-(1.29 \times 10^{-5} Wb/s)[/tex] = -12.9 mV

Magnetic flux refers to the measure of the total magnetic field that passes through a given area. In other words, it is the total amount of magnetic field lines passing through a surface area. It is measured in units called webers (Wb). The strength of the magnetic flux depends on the strength of the magnetic field and the size and orientation of the surface area it passes through.

Magnetic flux plays an essential role in electromagnetic induction and is used in many practical applications. For instance, in transformers, magnetic flux is used to transfer electrical energy from one circuit to another through electromagnetic induction. It is also used in motors, generators, and other electrical devices that rely on magnetic fields to function.

To learn more about Magnetic flux visit here:

brainly.com/question/30858765

#SPJ4

The electric flux at r=6 meters is 678,58 Nm^2/C.

To calculate the electric flux at r=6 meters, we need to use Gauss's law:

Φ = E * A

Where Φ is the electric flux, E is the electric field, and A is the area of the Gaussian surface. We know that the ball has a radius of 4 meters and a charge of 6 nC, which means we can calculate the charge density:

ρ = Q / V

Where ρ is the charge density, Q is the charge, and V is the volume of the sphere.

V = (4/3) * π * r^3

V = (4/3) * π * 4^3

V = 268.08 m^3

ρ = 6 nC / 268.08 m^3

ρ = 22.37 nC/m^3

We also know that the charge density is non-uniform and given by p = kr^3. This means that:

ρ = p / (4/3 * π * r^3)

22.37 nC/m^3 = k * r^3 / (4/3 * π * r^3)

k = 22.37 nC/m^3 * (4/3 * π * r^3) / r^3

k = 37.24 nC/m^6

Now we can use Gauss's law to find the electric flux at r=6 meters:

Φ = E * A

The electric field E can be found using Coulomb's law:

E = k * Q / r^2

Where k is the Coulomb constant (9 x 10^9 Nm^2/C^2), Q is the charge, and r is the distance from the center of the sphere.

E = 9 x 10^9 * 6 nC / 6^2

E = 9 x 10^9 * 6 / 36

E = 1.5 x 10^9 N/C

The area A of the Gaussian surface is:

A = 4 * π * r^2

A = 4 * π * 6^2

A = 452.39 m^2

Now we can calculate the electric flux:

Φ = E * A

Φ = 1.5 x 10^9 N/C * 452.39 m^2

Φ = 678,58 Nm^2/C

Therefore, the electric flux at r=6 meters is 678,58 Nm^2/C.

Know more about Electric Flux here:

https://brainly.com/question/30267804

#SPJ11

The expected measured grating separation, d, is approximately: 0.0016667 mm for a 600 groove/mm grating, and approximately: 0.0033333 mm for a 300 groove/mm grating.

To find the expected measured grating separation, d, for a 600 groove/mm grating and a 300 groove/mm grating, you need to convert grooves per millimeter to grating separation. The formula to do this is:
d = 1 / (grooves per mm)

For a 600 groove/mm grating:
1. Calculate the grating separation, d:
d = 1 / 600 grooves per mm
d ≈ 0.0016667 mm

For a 300 groove/mm grating:
1. Calculate the grating separation, d:
d = 1 / 300 grooves per mm
d ≈ 0.0033333 mm

To know more about "Grating separation" refer here:

https://brainly.com/question/13857764#

#SPJ11

The potential difference across a 2.00 mm length of copper wire with a resistivity of 1.72×10⁻⁸ Ω⋅m would be 3.44×10⁻¹¹ V (volts), assuming a current of 1.0 A flowing through the wire.

To determine the potential difference across a 2.00 mm length of copper wire (ρ = 1.72×10⁻⁸ ω⋅m), we would need to know the current flowing through the wire.

Without this information, it is not possible to calculate the potential difference using Ohm's law (V = IR).

However, if we assume that the wire is part of a circuit with a known current, we can calculate the potential difference using Ohm's law.

For example, if the circuit has a current of 1.0 A flowing through the wire, the potential difference across the 2.00 mm length of wire would be:

V = IR

V = (1.0 A)(2.00×10⁻³ m)(1.72×10⁻⁸ Ω⋅m)
V = 3.44×10⁻¹¹ V

This is the required potential difference.

Learn more about potential difference:

https://brainly.com/question/24142403

#SPJ11

The potential difference across a 2.00 mm length of copper wire with a resistivity of 1.72×10⁻⁸ Ω⋅m would be 3.44×10⁻¹¹ V (volts), assuming a current of 1.0 A flowing through the wire.

To determine the potential difference across a 2.00 mm length of copper wire (ρ = 1.72×10⁻⁸ ω⋅m), we would need to know the current flowing through the wire.

Without this information, it is not possible to calculate the potential difference using Ohm's law (V = IR).

However, if we assume that the wire is part of a circuit with a known current, we can calculate the potential difference using Ohm's law.

For example, if the circuit has a current of 1.0 A flowing through the wire, the potential difference across the 2.00 mm length of wire would be:

V = IR

V = (1.0 A)(2.00×10⁻³ m)(1.72×10⁻⁸ Ω⋅m)
V = 3.44×10⁻¹¹ V

This is the required potential difference.

Learn more about potential difference:

https://brainly.com/question/24142403

#SPJ11

a) The P-V diagram for the process is shown below:

      C

      |

      |   B (2V, 300 kPa)

      |   |

P     |   |

      |   |

      |   |

      |   |

      |   |

      |   |

      |   |

      |_ |________

          V (m³)

           A (V, 300 kPa)

b) The total work done is 600 KJ.

c) The change in internal energy of the gas during the entire process is 61.85 kJ.

a. The process can be divided into two steps:

Step 1: Expansion at constant pressure (process AB in the diagram)

Step 2: Heating at constant volume (process BC in the diagram)

b. The work done by the gas during the entire process can be calculated by the area under the P-V curve:

W = W_AB + W_BC

W_AB = P(V_B - V_A) = (300 kPa)(2V - V) = 600 kJ

W_BC = 0 (constant volume process)

W = 600 kJ

c. The change in internal energy of the gas during the entire process can be calculated using the first law of thermodynamics:

ΔU = Q - W

ΔU = Q_AB + Q_BC - W

Q_AB = mCpΔT = (2 kg)(2.5 kJ/kg.K)(50 K) = 250 kJ

Q_BC = mCvΔT = (2 kg)(0.75 kJ/kg.K)(273 K) = 410.85 kJ

ΔU = (250 kJ + 410.85 kJ) - 600 kJ = 61.85 kJ

To know more about internal energy click on below link:

https://brainly.com/question/14668303#

#SPJ11

The change in potential energy of the spring is approximately 207.8145 J.

To determine the change in potential energy of a spring with a stiffness of 1170 N/m, a relaxed length of 0.43 m, and a length change from 0.27 m to 0.88 m, you can follow these steps:

1. Calculate the initial compression/stretch from the relaxed length:
Initial stretch: 0.43 m - 0.27 m = 0.16 m (compressed)
Final stretch: 0.88 m - 0.43 m = 0.45 m (stretched)

2. Use the formula for the potential energy of a spring:

PE = (1/2) * k * x^2
where PE is the potential energy, k is the stiffness (1170 N/m), and x is the stretch or compression.

3. Calculate the initial potential energy (PE_initial) and final potential energy (PE_final):
PE_initial = (1/2) * 1170 * (0.16)^2 = 30.048 J
PE_final = (1/2) * 1170 * (0.45)^2 = 237.8625 J

4. Calculate the change in potential energy:
Change in potential energy = PE_final - PE_initial = 237.8625 J - 30.048 J = 207.8145 J

To learn more about "potential energy", visit: https://brainly.com/question/14427111

#SPJ11

The average speed of the particle is 0.331 m/s.

To find the average speed of the particle, we need to first calculate the distance traveled by the particle. Since the particle travels 19 times around the circle, the distance it travels is the circumference of the circle multiplied by 19.

The circumference of the circle is given by 2πr, where r is the radius of the circle.

Circumference = 2πr = 2 x 3.14 x 10 cm = 62.8 cm

Distance traveled = 19 x Circumference = 19 x 62.8 cm = 1193.2 cm

To convert this distance to meters, we divide by 100:

Distance traveled = 1193.2 cm / 100 = 11.932 m

Now that we have the distance traveled, we can use the formula for average speed:

Average speed = distance / time

In this case, the time is given as 36 seconds.

Average speed = 11.932 m / 36 s = 0.331 m/s

Therefore, the average speed of the particle is 0.331 m/s.

To know more about speed refer here:

https://brainly.com/question/28224010

#SPJ11

The average speed of the particle is 0.331 m/s.

To find the average speed of the particle, we need to first calculate the distance traveled by the particle. Since the particle travels 19 times around the circle, the distance it travels is the circumference of the circle multiplied by 19.

The circumference of the circle is given by 2πr, where r is the radius of the circle.

Circumference = 2πr = 2 x 3.14 x 10 cm = 62.8 cm

Distance traveled = 19 x Circumference = 19 x 62.8 cm = 1193.2 cm

To convert this distance to meters, we divide by 100:

Distance traveled = 1193.2 cm / 100 = 11.932 m

Now that we have the distance traveled, we can use the formula for average speed:

Average speed = distance / time

In this case, the time is given as 36 seconds.

Average speed = 11.932 m / 36 s = 0.331 m/s

Therefore, the average speed of the particle is 0.331 m/s.

To know more about speed refer here:

https://brainly.com/question/28224010

#SPJ11

If the sunlight from a star peaks at a wavelength of 0.55 µm, the surface temperature of that star is 5270 K.

If the sunlight from a star peaks at a wavelength of 0.55 µm, we can determine the surface temperature of that star using Wien's Law.

Wien's Law states that the peak wavelength (λ_max) of a black body is inversely proportional to its temperature (T). The formula is:
λ_max = b / T
where b is Wien's displacement constant (approximately 2.898 x 10⁻³ m·K).

Given the peak wavelength of 0.55 µm, we can solve for the temperature by following the below steps:

Step 1: Convert the peak wavelength to meters:

0.55 µm = 0.55 x 10⁻⁶ m

Step 2: Rearrange Wien's Law to solve for T:

T = b / λ_max

Step 3: Plug in the values and calculate the temperature:

T = (2.898 x 10⁻³ m·K) / (0.55 x 10⁻⁶ m) = 5270 K

So, the surface temperature of the star is approximately 5270 K.

Learn more about temperature:

https://brainly.com/question/25677592

#SPJ11

If the sunlight from a star peaks at a wavelength of 0.55 µm, the surface temperature of that star is 5270 K.

If the sunlight from a star peaks at a wavelength of 0.55 µm, we can determine the surface temperature of that star using Wien's Law.

Wien's Law states that the peak wavelength (λ_max) of a black body is inversely proportional to its temperature (T). The formula is:
λ_max = b / T
where b is Wien's displacement constant (approximately 2.898 x 10⁻³ m·K).

Given the peak wavelength of 0.55 µm, we can solve for the temperature by following the below steps:

Step 1: Convert the peak wavelength to meters:

0.55 µm = 0.55 x 10⁻⁶ m

Step 2: Rearrange Wien's Law to solve for T:

T = b / λ_max

Step 3: Plug in the values and calculate the temperature:

T = (2.898 x 10⁻³ m·K) / (0.55 x 10⁻⁶ m) = 5270 K

So, the surface temperature of the star is approximately 5270 K.

Learn more about temperature:

https://brainly.com/question/25677592

#SPJ11

Volume of aluminum is, 3.7 x 10^-4 m^3. The tension in the string after the metal is immersed in the container of water is 6.2 N.

The density of aluminum is 2700 kg/m³, so the mass of the aluminum is 1.0 kg.

The density of the water is 1000 kg/m³, so the buoyant force on the aluminum is (1.0 kg)(9.81 m/s²) - (1000 kg/m³)(9.81 m/s²)(volume of aluminum).

Since the aluminum is completely immersed in the water, the buoyant force is equal to the weight of the water displaced, which is (1000 kg/m³)(9.81 m/s²)(volume of aluminum).

Setting these two equations equal and solving for the volume of aluminum, we get volume of aluminum = 3.7 x 10^-4 m^3.

The buoyant force on the aluminum is (1000 kg/m³)(9.81 m/s²)(volume of aluminum) = (1000 kg/m³)(9.81 m/s²)(3.7 x 10^-4 m³) = 3.61 N.

Since the aluminum is suspended from a string, the tension in the string is equal to the weight of the aluminum plus the buoyant force: (1.0 kg)(9.81 m/s²) + 3.61 N = 6.2 N.

To know more about aluminum, here

brainly.com/question/25869623

#SPJ4

The force vector on the electron at this instant can be calculated using the Biot-Savart Law and Lorentz Force Law.

The magnitude of the force vector is F = |q|vBsinθ, where F is the force, q is the charge of the electron, v is its speed, B is the magnetic field, and θ is the angle between v and B.


1. Calculate the magnetic field B at the electron's position using the Biot-Savart Law: B = (μ₀I)/(2πr), where μ₀ is the permeability of free space (4π x 10⁻⁷ Tm/A), I is the current (9 A), and r is the distance from the wire (2 x 10⁻³ m).

2. Determine the angle θ between the electron's velocity vector and the magnetic field vector. In this case, θ = 90°, as the velocity vector is perpendicular to the magnetic field vector.

3. Calculate the force magnitude using F = |q|vBsinθ, where q is the elementary charge (-1.6 x 10⁻¹⁹ C), v is the electron's speed (3 x 10⁷ m/s), and sinθ = sin(90°) = 1.

4. Finally, express the force vector in terms of its components.

To know more about Biot-Savart Law click on below link:

https://brainly.com/question/1120482#

#SPJ11

If we throw a rock away from the asteroid at a speed of 33 m/s, then the final speed is 33 m/s.

The escape speed of the earth at the surface is approximately 11.186 km/s. That means “an object should have a minimum of 11.186 km/s initial velocity to escape from earth's gravity and fly to infinite space.”

Since the escape speed from the asteroid is only 28 m/s, any object thrown away from the asteroid at a speed greater than this will be able to escape the asteroid's gravitational pull.

Therefore, the final speed of the rock thrown away from the asteroid at a speed of 33 m/s will be 33 m/s, as it will escape the asteroid's gravity with this speed.

Learn more about speed:

https://brainly.com/question/13943409

#SPJ11

The average momentum of the 70.0-kg sprinter who runs the 100-m dash in 9.65 s is 725.2 kg*m/s.

To calculate the average momentum of the sprinter, we first need to calculate the speed at which the sprinter is running.
We can use the formula:
Speed = distance/time
The distance of the 100-m dash is 100 m and the time taken by the sprinter is 9.65 s.
Therefore, Speed = 100 m/9.65 s = 10.36 m/s
Now that we know the speed of the sprinter, we can calculate the momentum using the formula:
Momentum = mass x velocity
The mass of the sprinter is given as 70.0 kg and the velocity is 10.36 m/s.
Therefore, Momentum = 70.0 kg x 10.36 m/s = 725.2 kg*m/s
So, the average momentum of the 70.0-kg sprinter who runs the 100-m dash in 9.65 s is 725.2 kg*m/s.

Learn more about "momentum " at: https://brainly.com/question/904448

#SPJ11

The best diagram representing the motion of ball B after the collision would show ball B moving with a speed of 4 m/s in a direction opposite to the 53° deflection of ball A.

To help you determine which diagram best represents the motion of ball B after the collision, we need to consider the conservation of momentum. In this scenario, speed and collision are important factors in understanding the behavior of the balls.

Since we are dealing with an off-center collision between two identical balls (A and B) on a frictionless surface, we can use the principle of conservation of momentum. This states that the total momentum before the collision is equal to the total momentum after the collision.

Calculate the initial momentum of the balls.
Initial momentum of A (mA * vA,0) = 10 m/s
Initial momentum of B (mB * vB,0) = 0 m/s (since ball B is at rest)

Calculate the momentum of ball A after the collision.
Final momentum of A (mA * vA) = 6 m/s

Calculate the momentum of ball B after the collision.
Using the conservation of momentum, we know that the initial total momentum equals the final total momentum:
(mA * vA,0) + (mB * vB,0) = (mA * vA) + (mB * vB)
10 m/s + 0 = 6 m/s + (mB * vB)
So, (mB * vB) = 4 m/s

Analyze the angle of deflection (θA = 53°) of ball A after the collision.
Based on this information, ball B should move in a direction opposite to that of ball A's deflection. This is because the momentum is conserved and the masses of the balls are identical.

In light of the processes mentioned above, the ideal figure depicting ball B's motion following the impact would show ball B moving at a speed of 4 m/s in the opposite direction of the ball A's 53° deflection.

Learn more about "speed": https://brainly.com/question/13943409

#SPJ11

The distance between the first and second dark lines of the interference pattern is approximately 0.0127 μm when the two narrow slits are spaced 1.85 μm apart and illuminated with coherent light of wavelength 546 nm at a distance of 30.0 cm from the screen.

The distance between the first and second dark lines of the interference pattern can be calculated using the equation:

dsinθ=(m+1/2)λ

where d is the distance between the slits, θ is the angle between the line perpendicular to the screen and the line connecting the point on the screen and the center of the two slits, m is the order of the dark fringes, and λ is the wavelength of the light.

In this case, we have d=1.85 μm, λ=546 nm, and the distance between the slits and the screen L=30.0 cm. To find θ, we can use the small-angle approximation: θ=tan⁻¹(y/L), where y is the distance from the center of the interference pattern on the screen.

For the first dark line, m=0, so we have

sinθ=λ/d, which gives us

θ=sin⁻¹(λ/d)

=sin⁻¹(0.546/1.85×10⁻6)

=0.178 radians.

Using this value of θ, we can find the distance between the first and second dark lines:

Δy=dθ/(2π)

=(1.85×10⁻6)×0.178/(2π)

=1.27×10⁻8 m, or approximately 0.0127 μm.

To know more about coherent light click on below link:

https://brainly.com/question/31448293#

#SPJ11

Answer:

Equation:

Kinetic energy = 1/2 mv^2

velocity = [tex]\sqrt{\frac{2KE}{m} }[/tex]

work:

m = 34 kg

kinetic energy = 25 J

velocity = [tex]\sqrt{\frac{2(25)}{34} } = \sqrt{\frac{50}{34} } = 1.212678125[/tex]

Answer with units: 1.21 m/s