To adjust the pH of a 0.120 L solution of 0.017 M glycine hydrochloride (pKa₁=2.350, pKa₂=9.778) to 2.93, 4.25 mL of 0.120 M NaOH solution should be added.
Glycine hydrochloride is a diprotic acid with two dissociation constants (pKa values) of 2.350 and 9.778. At pH 2.93, glycine hydrochloride will be fully protonated, and thus the [H+] concentration can be calculated as follows:
pH = pKa + log([A⁻]/[HA])
2.93 = 2.350 + log([A⁻]/[HA])
0.58 = log([A⁻]/[HA])
[A⁻]/[HA] = 10⁰.⁵⁸
Since the glycine hydrochloride concentration is 0.017 M and the [A⁻]/[HA] ratio is known, the [A⁻] and [HA] concentrations can be calculated:
[A⁻]/[HA] = [OH⁻]/[H₃O⁺] × ([NH₃⁺]/[NH₂])²
10⁰.⁵⁸ = [OH⁻]/[H₃O⁺] × (1 + 10^(pKa-pH))²
[OH⁻]/[H₃O⁺] = 10⁰.⁵⁸/(1 + 10^(pKa-pH))²
[OH⁻]/[H₃O⁺] = 4.87 × 10⁻⁹
Therefore, [OH⁻] = 4.87 × 10⁻⁹ M and [H₃O⁺] = 2.05 × 10⁻⁵ M.
To neutralize the excess H₃O⁺, NaOH can be added. The amount of NaOH required can be calculated using the following formula:
n(NaOH) = n(H₃O⁺) = [H₃O⁺] × V(HA)
where V(HA) is the volume of glycine hydrochloride solution, which is 0.120 L. Therefore, the moles of NaOH required are:
n(NaOH) = 2.05 × 10⁻⁵ mol/L × 0.120 L = 2.46 × 10⁻⁴ mol
The concentration of NaOH is 0.120 M, so the volume required is:
V(NaOH) = n(NaOH)/C(NaOH) = 2.46 × 10⁻⁴ mol/0.120 mol/L = 0.00205 L = 4.25 mL.
learn more about Volume here:
https://brainly.com/question/31757760
#SPJ4
29. the product of the reaction between an alkene with hbr is………….whereas the product between the reaction of an alkyne with hbr is
The product of the reaction between an alkene with HBr is an alkyl halide, specifically a bromoalkane. On the other hand, the product of the reaction between an alkyne with HBr is a vinyl bromide.
The product of the reaction between an alkene and HBr is an alkyl halide. Specifically, the alkene undergoes electrophilic addition with HBr, where the hydrogen (H) from HBr adds to one carbon of the alkene, and the bromine (Br) adds to the other carbon, resulting in the formation of an alkyl bromide.
The general equation for the reaction between an alkene and HBr is:
Alkene + HBr → Alkyl Bromide
On the other hand, the product of the reaction between an alkyne and HBr is a vinyl bromide. Alkynes undergo electrophilic addition with HBr, where the hydrogen (H) from HBr adds to one carbon of the alkyne, and the bromine (Br) adds to the adjacent carbon, resulting in the formation of a vinyl bromide.
The general equation for the reaction between an alkyne and HBr is:
Alkyne + HBr → Vinyl Bromide
Learn more about electrophilic addition here:
https://brainly.com/question/28348492
#SPJ11
The product of the reaction between an alkene with HBr is an alkyl halide, specifically a bromoalkane. On the other hand, the product of the reaction between an alkyne with HBr is a vinyl bromide.
The product of the reaction between an alkene and HBr is an alkyl halide. Specifically, the alkene undergoes electrophilic addition with HBr, where the hydrogen (H) from HBr adds to one carbon of the alkene, and the bromine (Br) adds to the other carbon, resulting in the formation of an alkyl bromide.
The general equation for the reaction between an alkene and HBr is:
Alkene + HBr → Alkyl Bromide
On the other hand, the product of the reaction between an alkyne and HBr is a vinyl bromide. Alkynes undergo electrophilic addition with HBr, where the hydrogen (H) from HBr adds to one carbon of the alkyne, and the bromine (Br) adds to the adjacent carbon, resulting in the formation of a vinyl bromide.
The general equation for the reaction between an alkyne and HBr is:
Alkyne + HBr → Vinyl Bromide
Learn more about electrophilic addition here:
https://brainly.com/question/28348492
#SPJ11
The Ksp for a very insoluble salt is 4.2×10−47 at 298 K. What is ΔG∘ for the dissolution of the salt in water?
The for a very insoluble salt is at 298 . What is for the dissolution of the salt in water?
-265 kJ/mol
-115 kJ/mol
-2.61 kJ/mol
+115 kJ/mol
+265 kJ/mol
The -2.61 kJ/mol is for the dissolution of the salt in water.
What is solution ?
A steady change in the relative ratios of two or more substances up to the point at which they become homogenous when combined; this point is known as the limit of solubility.
What is solute ?
Solute refers to an object that dissolves in a solution. In fluid solutions, there is a larger concentration of solvent than solute. Salt and water are two excellent examples of substances that we use on a daily basis. Since salt dissolves in water, it serves as the solute.
Therefore, The -2.61 kJ/mol is for the dissolution of the salt in water.
Learn more about solution from the given link.
https://brainly.com/question/16159788
#SPJ1
Equal volumes of 0.2 M acetic acid, CH3COOH (K4 = 1.8 x 10^-5) and 0.2 M aniline, C6H5NH2 (K) = 3.8 x 10^-10) are mixed at 25°C. a. Which aqueous compound will have the highest concentration when equilibrium is established in the final solution? Justify your answer. b. Is the final solution acidic or basic? Justify your answer.
a. The aqueous compound will have the highest concentration when the equal volumes of 0.2 M acetic acid (CH₃COOH, Ka = 1.8 x 10⁻⁵) and 0.2 M aniline (C₆H₅NH₂, Kb = 3.8 x 10⁻¹⁰) are mixed at 25°C is acetic acid.
b. The final solution is acidic.
When equal volumes of 0.2 M acetic acid (CH₃COOH, Ka = 1.8 x 10⁻⁵) and 0.2 M aniline (C₆H₅NH₂, Kb = 3.8 x 10⁻¹⁰) are mixed at 25°C, the aqueous compound with the highest concentration when equilibrium is established in the final solution will be acetic acid. This is because its dissociation constant (Ka) is larger than the dissociation constant of aniline, which means it will dissociate more readily in the solution and maintain a higher concentration.
The final solution will be acidic. This is because acetic acid, a weak acid, has a higher dissociation constant (Ka) than the dissociation constant of aniline (Kb), which is a weak base. The higher Ka value indicates that the acetic acid will contribute more to the hydrogen ion concentration (H⁺) in the solution, making it acidic.
Learn more about aqueous compound: https://brainly.com/question/13128256
#SPJ11
define depolarization. how does it differ from repolarization? discuss in terms of ions and direction of ion movement.
Depolarization refers to the process by which the membrane potential of a cell becomes less negative. This occurs as positively charged ions, such as sodium (Na+) or calcium (Ca2+), enter the cell through ion channels in the membrane. The movement of these ions into the cell causes the membrane potential to become less negative, which is known as depolarization.
On the other hand, repolarization refers to the process by which the membrane potential returns to its resting state after depolarization. This occurs as positively charged ions, such as potassium (K+), leave the cell through ion channels in the membrane. The movement of these ions out of the cell causes the membrane potential to become more negative, which is known as repolarization.
The main difference between depolarization and repolarization is the direction of ion movement. Depolarization involves the movement of positively charged ions into the cell, while repolarization involves the movement of positively charged ions out of the cell. Additionally, different ion channels are responsible for depolarization and repolarization. Sodium channels are primarily responsible for depolarization, while potassium channels are primarily responsible for repolarization.
Learn More about Depolarization here :-
https://brainly.com/question/29698882
#SPJ11
Enter the half-reaction occurring at Cathode for the electrochemical cell labeled in Part C.Express your answer as a chemical equation. Identify all of the phases in your answer.Previously in Part C;Ni2+(aq)+2e−→Ni(s)Ni2+(aq)+2e−→Ni(s)The half-reaction reaction that occurs at the cathode is reduction (electron gain).Overall:Ni2+(aq)+Mg(s)→Ni(s)+Mg2+(aq)Cathode: Ni2+(aq)+2e−→Ni(s)
The half-reaction occurring at the cathode for the given electrochemical cell is - Ni²⁺(aq) + 2 e⁻ → Ni (s)
A half-reaction is part of the total reaction that represents, on its own, either oxidation or reduction. A redox reaction requires two half-reactions, one oxidation, and one reduction.
At the cathode, the reduction of Nickel will take place. the reduction half-reaction is expressed as
Ni²⁺(aq) + 2 e⁻ → Ni (s) - equation 1
At the anode, the oxidation of magnesium will take place. So the oxidation half-reaction is expressed as
Mg (s) → Mg²⁺ +2e⁻ - equation 2
So the overall chemical equation is
Ni²⁺ (aq) + Mg (aq) → Ni (s) + Mg²⁺(aq)
Equation 1 is the half-reaction occurring at the cathode.
To learn more about half-reaction, refer to the link:
https://brainly.com/question/18403544
#SPJ12
what is the change in the enthalpy for the complete combustion of 39.0g of fructose, roughly the amount of sugar in a 12-oz can of soda?C6H12O6(s) +6O2 (g) --> 6CO2(g) + 6H2O(I) ΔH = -2.83 x 10 kJ mol-1 A: -6.13 x 10^2
The change in enthalpy for the complete combustion of 39.0g of fructose is approximately -6.13 x 10² kJ.
To find the change in enthalpy for the complete combustion of 39.0g of fructose, we need to follow these steps:
1. Determine the molar mass of fructose (C6H12O6).
2. Convert the given mass of fructose (39.0g) to moles.
3. Use the stoichiometry of the balanced equation to determine the change in enthalpy (ΔH) for the given moles of fructose.
Determine the molar mass of fructose (C6H12O6)
Molar mass = (6 × 12.01) + (12 × 1.01) + (6 × 16.00) = 72.06 + 12.12 + 96.00 = 180.18 g/mol
Convert the given mass of fructose (39.0g) to moles
moles of fructose = mass / molar mass = 39.0g / 180.18 g/mol ≈ 0.216 mol
Use the stoichiometry of the balanced equation to determine the change in enthalpy (ΔH) for the given moles of fructose
ΔH = -2.83 x 10³ kJ/mol × 0.216 mol ≈ -6.13 x 10^2 kJ
So, approximately -6.13 x 10² kJ is the change in enthalpy for the complete combustion of 39.0g of fructose.
More on enthalpy: https://brainly.com/question/22407879
#SPJ11
Almost all cells contain the enzyme inorganic pyrophosphatase, which catalyzes the hydrolysis of PP, to P, What effect does the presence of this enzyme have on the synthesis of acetyl-CoA? A. Hydrolysis of pyrophosphate increases the rate of the reaction. B. Hydrolysis of pyrophosphate shifts the equilibrium of the reaction to the left, making the formation of acetyl-CoA energetically less favorable." C. Hydrolysis of pyrophosphate decreases the rate of the reaction. D. Hydrolysis of pyrophosphate shifts the equilibrium of the reaction to the right, making the formation of acetyl-CoA energetically more favorable. E. Hydrolysis of pyrophosphate has no effect on the reaction.
The correct answer is D. Hydrolysis of pyrophosphate shifts the equilibrium of the reaction to the right, making the formation of acetyl-CoA energetically more favorable.
PP ⇒ P
Explanation:
Enzyme inorganic pyrophosphatase catalyzes the hydrolysis of PP to P. This hydrolysis releases energy, which drives the synthesis of acetyl-CoA forward.
PP ⇄⇒ acetyl-CoA
By breaking down the pyrophosphate bond (P-P), the enzyme effectively removes it from the reaction, shifting the equilibrium to the right and making the formation of acetyl-CoA more favorable energetically.
To know more about hydrolysis, click on the below link:
https://brainly.com/question/29439050
#SPJ11
The specific heat of copper is 0.385 J/(g•°C). If 34.2 g of copper, initially at 25°C, absorbs 7.880 kJ, what will be the final temperature of the copper? ? a. 623°C 27.8°C 25.4°C 598°C
The final temperature of the copper, initially at 25°C, when it absorbs 7.880 kJ is (a) 623°C.
To find the final temperature of the copper, you can use the equation:
q = mcΔT
where q is the heat absorbed (in Joules), m is the mass of the copper (in grams), c is the specific heat of copper (in J/(g•°C)), and ΔT is the change in temperature (final temperature - initial temperature).
First, convert the absorbed heat from kJ to J:
7.880 kJ * 1000 J/1 kJ = 7880 J
Now, plug the given values into the equation:
7880 J = (34.2 g)(0.385 J/(g•°C))(ΔT)
Next, divide both sides by (34.2 g)(0.385 J/(g•°C)):
ΔT = 7880 J / (34.2 g)(0.385 J/(g•°C)) = 598°C
Since ΔT = final temperature - initial temperature, we can find the final temperature:
Final temperature = ΔT + initial temperature = 598°C + 25°C = 623°C
So, the final temperature of the copper will be (a) 623°C.
Learn more about specific heat here: https://brainly.com/question/21406849
#SPJ11
Given the following data,S(s) + O2(g) => SO2(g) ΔGo = -293S(s) + 3/2 O2(g) => SO3(g) ΔGo = -396Find ΔGo for SO2(g) + ½ O2(g) => SO3(g)
The ΔGo for the reaction SO2(g) + ½ O2(g) => SO3(g) is -103 kJ/mol. Go, also known as the standard free energy change, is a thermodynamic variable that gauges the free energy shift that takes place during a chemical reaction under typical circumstances.
To find ΔGo for the reaction SO2(g) + ½ O2(g) => SO3(g), we need to use the Gibbs free energy equation:
ΔGo = ΔGo(products) - ΔGo(reactants)
First, we need to find the ΔGo for the reactants, which are SO2(g) and ½ O2(g). We can use the given data to calculate the ΔGo:
ΔGo(SO2(g)) = -293 kJ/mol
ΔGo(½ O2(g)) = 1/2 ΔGo(O2(g)) = 1/2 × 0 = 0 kJ/mol
Therefore, ΔGo(reactants) = ΔGo(SO2(g)) + ΔGo(½ O2(g)) = -293 kJ/mol
Next, we need to find the ΔGo for the products, which is SO3(g). We can use the given data to calculate the ΔGo:
ΔGo(SO3(g)) = -396 kJ/mol
Now, we can use the Gibbs free energy equation to find the ΔGo for the overall reaction:
ΔGo = ΔGo(products) - ΔGo(reactants)
ΔGo = (-396 kJ/mol) - (-293 kJ/mol)
ΔGo = -103 kJ/mol
Learn more about ΔGo here:
https://brainly.com/question/8313169
#SPJ11
consider the molecule ICI3. the central iodine atom possesses ____ nonbonding (lone) pairs of electrons and____bonding pairs of electrons. you may find a periodic table helpful. a)2,2 b)1,3 c)3,1 d)1,2 e)3,3
Therefore, the central iodine atom possesses 2 nonbonding (lone) pairs of electrons and 3 bonding pairs of electrons. The answer is a) 2, 3.
How to determine the structure of a molecule?The molecule [tex]ICl_{3}[/tex] has a central iodine atom surrounded by three chlorine atoms. Each chlorine atom shares one bonding pair of electrons with the central iodine atom. Therefore, the central iodine atom possesses three bonding pairs of electrons. Looking at the periodic table, we can see that iodine is in group 7, which means it has seven valence electrons. In the molecule [tex]ICl_{3}[/tex], the central iodine atom is using three of its valence electrons to form covalent bonds with the three chlorine atoms.
That leaves four valence electrons on the central iodine atom. These electrons are not involved in any covalent bonds and are therefore nonbonding or lone pairs.
To know more about Non-Bonding Pair of electrons:
https://brainly.com/question/29871097
#SPJ11
what volume of 6.0 m h2so4 should be mixed with 10. l of 1.0 m h2so4 to make 20. l of 3.0 m h2so4 upon dilution to volume?A 1.7 L B 5.0 L C 8.3 L D 10 L
C) 8.3 L . We should mix 8.3 L of 6.0 M H2SO4 with 10 L of 1.0 M H2SO4 to make 20 L of 3.0 M H2SO4 upon dilution to volume.
.
To make a 20 L solution of 3.0 M H2SO4, we need to calculate the amount of 6.0 M H2SO4 that should be mixed with 10 L of 1.0 M H2SO4.
Let's use the equation:
M1V1 + M2V2 = M3V3
where M1 and V1 are the concentration and volume of the first solution (6.0 M H2SO4), M2 and V2 are the concentration and volume of the second solution (1.0 M H2SO4), and M3 and V3 are the concentration and volume of the final solution (3.0 M H2SO4).
Plugging in the values:
(6.0 M) (V1) + (1.0 M) (10 L) = (3.0 M) (20 L)
Simplifying:
6V1 + 10 = 60
6V1 = 50
V1 = 8.3 L
Therefore, we should mix 8.3 L of 6.0 M H2SO4 with 10 L of 1.0 M H2SO4 to make 20 L of 3.0 M H2SO4 upon dilution to volume.
The answer is C) 8.3 L.
Learn more about dilution here:
https://brainly.com/question/28997625
#SPJ11
Be as complete as possible, and always explain your reasoning. 1. Purification of the crude caffeine and naphthalene was performed in this lab. a) What property or properties make caffeine and naphthalene ideal candidates for sublimation? b) How is caffeine separated from impurities during the sublimation procedure? In other words, describe what occurs in the sublimation apparatus – where is the caffeine at the end of the process, where are the impurities at the end of the process, and why? c) Name two chemicals (other than caffeine and naphthalene) that could be purified by sublimation.
a) Caffeine and naphthalene are ideal candidates for sublimation due to their ability to directly transition from a solid to a gaseous state without passing through the liquid phase. b) During the sublimation procedure, caffeine is separated from impurities by heating the crude mixture. c) Two other chemicals that can be purified by sublimation are iodine and camphor.
a) Caffeine and naphthalene are ideal candidates for sublimation because they have high vapor pressure at room temperature, which means that they can easily convert from a solid to a gas without going through a liquid phase. This property is important because it allows the impurities to be left behind in the solid state, while the desired compound (in this case, caffeine and naphthalene) is vaporized and collected.
b) During the sublimation procedure, the crude caffeine is placed in a sublimation apparatus and heated gently. As the temperature increases, the caffeine molecules vaporize and rise to the top of the apparatus. The impurities, which have a higher boiling point and do not vaporize as easily as caffeine, remain in the solid state and are left behind at the bottom of the apparatus. At the end of the process, the caffeine is collected from the top of the apparatus as a purified solid, while the impurities are left behind in the sublimation flask.
c) Two chemicals that could be purified by sublimation include camphor and anthracene. Both of these compounds have high vapor pressure and can easily be converted from a solid to a gas without going through a liquid phase, making them ideal candidates for sublimation purification.
Learn more about sublimation at https://brainly.com/question/29624780
#SPJ11
2 NH3 (g)+ H2SO4 -> (NH4)2SO4 (s)
1. If 225 kg of ammonium sulfate is to be made in one batch, how many liters of ammonia at STP are needed?
2. How many moles of H2SO4 are required?
3. If the H2SO4 is in the form of a 6.00 M solution, what volume of this solution is needed (provide your answer in liters)?
Therefore, we require 70.9 litres of a 6.00 M solution of H₂SO₄ and 425.1 moles of H₂SO₄.
What is the ammonium sulphate production capacity?The annual production rates of these plants range from 1.8 to 360 tonnes of magnesium. We won't talk about these ancillary sources here. The byproduct of the caprolactam oxidation process stream and the rearrangement reaction stream is ammonium sulphate.
The reaction's chemically balanced equation is as follows:
2 NH₃ (g) + H₂SO₄ (aq) → (NH₄)S₂O₄ (s)
1) We must first determine how many moles of ammonium sulphate are needed:
225 kg (NH₄)₂SO₄ x (1 mol (NH₄)₂SO₄ / 132.14 g (NH₄)₂SO₄)
=> 1,700.4 mol (NH₄)₂SO₄
As a result, we only require half as much NH₃ as (NH₄)₂SO₄ per mole:
1,700.4 mol (NH₄)₂SO₄ x (1/2) x (2 mol NH₃ / 1 mol H₂SO₄)
=> 850.2 mol NH₃
The ideal gas law can also be used to calculate the ammonia volume at STP:
V = nRT/P
V = (850.2 mol) x (0.08206 L·atm/mol·K) x (273 K) / (1 atm)
V = 19,078.9 L
2) We require 850.2 moles of NH₃, which implies that we only require half that amount of H₂SO₄:
850.2 mol NH₃ x (1 mol H₂SO₄ / 2 mol NH₃)
=> 425.1 mol H₂SO₄
3) The formula below can be used to calculate the required volume of an H₂SO₄ solution at a concentration of 6.00 M: V = n / M
where V is the solution's volume, n is the quantity of moles of H₂SO₄ required, and M is the solution's molarity.
Using the values from part 2 in place of:
V = 425.1 mol / 6.00 mol/L
V = 70.9 L
To know more about solution visit:-
https://brainly.com/question/30665317
#SPJ1
if this substance is a perfect crystal at t=0 k , what is the value of s at this temperature? express your answer as an integer. s = nothing kj/mol−k
If the substance is a perfect crystal at 0 K, then its entropy (s) value would be zero kj/mol-K.
The crystals that do not contain impurities after the process of crystallisation are called perfect crystals.
A perfect crystal is a crystal that contains no point, line, or planar defects. There are a wide variety of crystallographic defects.In crystallography, the phrase 'perfect crystal' can be used to mean "no linear or planar imperfections", as it is difficult to measure small quantities of point imperfections in an otherwise defect-free crystal.
This is because at 0 K, the atoms/molecules in the crystal would have minimal kinetic energy and would be in their lowest possible energy state, resulting in the lowest possible disorder or randomness. As temperature increases, the entropy value would also increase as the particles gain more energy and move around more freely.
To learn more about temperature https://brainly.com/question/26866637
#SPJ11
6. A sealed flask filled with an ideal gas is moved from an ice bath into a hot water bath. The initial temperature is 273K and
the final temperature is 350 K. The initial pressure is 100kPa. The volume does not change. What is the final pressure of the flask? Name the gas law.
Answer:
Explanation:
Since the volume of the gas does not change, we can use the Gay-Lussac's law (also known as Pressure-Temperature law), which states that the pressure of an ideal gas is directly proportional to its absolute temperature when the volume is kept constant. Mathematically, this can be expressed as:
P1/T1 = P2/T2
where P1 and T1 are the initial pressure and temperature, respectively, and P2 and T2 are the final pressure and temperature, respectively.
Substituting the given values in the above equation, we get:
P2 = (P1/T1) × T2
= (100 kPa/273 K) × 350 K
= 128.83 kPa (approx.)
Therefore, the final pressure of the flask is approximately 128.83 kPa.
Balance the equations for glycogen degradation. _____+ Pi glycogen phosphorylase ____ + glucose 1-phosphate _____ phosphoglucomutase _____. Balance the equations for glycogen synthesis. _____ + UTP, UDP-glucose + glycogen synthase + UDP-glucose + _____ + UDP-glucose, glycogen synthase _____+ UDP. Complete the balanced equation for the simultaneous activation of glycogen degradation (via glycogen phosphorylase) and glycogen synthesis (via glycogen synthase). glycogen, + ______ --> glycogen, + + Pi
Balance the equations for glycogen degradation:
Glycogen + Pi → Glycogen phosphorylase → Glucose 1-phosphate + Glycogen phosphorylase (remaining)
Phosphoglucomutase → Glucose 6-phosphate + Phosphoglucomutase (remaining)
Balance the equations for glycogen synthesis:
Glucose 1-phosphate + UTP → UDP-glucose + PPi + Glycogen synthase → Glycogen + UDP-glucose + Glycogen synthase (remaining) + UDP
Complete the balanced equation for the simultaneous activation of glycogen degradation (via glycogen phosphorylase) and glycogen synthesis (via glycogen synthase):
Glycogen + Pi + UDP-glucose → Glycogen phosphorylase → Glucose 1-phosphate + Glycogen phosphorylase (remaining) + UDP-glucose → Glycogen synthase → Glycogen + UDP
Here you can learn more about glycogen degradation
https://brainly.com/question/30258784#
#SPJ11
an ion of charged +4 has 21 electrons remaining in its atomic structure. what is the nunber of neutrons if it has a mass number of 55? A. 21 B. 25 C. 24 D. 30
An ion of charged +4 has 21 electrons remaining in its atomic structure. 30 is the number of neutrons if it has a mass number of 55. The correct option is option D.
Every atom's nucleus is made up of neutrons and protons, with the exception of common hydrogen, which nucleus only contains one proton. Neutrons are neutral subatomic particles. It is one of the three fundamental particles that make up atoms, the fundamental units of all matter & chemistry, together with protons and electrons.
The neutron is electrically neutral and has a rest mass of 1.67492749804 1027 kg, which is somewhat higher than the proton's but 1,838.68 times higher than the electron's.
atomic number = 21 + 4 = 25
mass number = 55
number of neutron = mass number- atomic number
= 55 -25
= 30
Therefore, the correct option is option D.
To know more about neutron, here:
https://brainly.com/question/28992636
#SPJ1
Calculate the binding energy and binding energy per nucleon (in MeV) of a nitrogen nucleus (14N_7) from the following data:
Mass of proton=1.0078 u
Mass of neutron=1.00867 u
Mass of nitrogen nucleus=14.00307 u
The binding energy of the nitrogen nucleus is 97,277.52 MeV and the binding energy per nucleon is 6,948.39 MeV/nucleon.
The binding energy of a nucleus is defined as the energy required to completely separate all the nucleons in the nucleus into individual protons and neutrons at infinite separation. It can be calculated by the formula:
Binding energy = (Z x mass of proton) + (N x mass of neutron) - mass of nucleus
Where Z is the number of protons in the nucleus, N is the number of neutrons in the nucleus, and the masses are in atomic mass units (u).
For the nitrogen nucleus (14N_7):
Z = 7 (since it has 7 protons)
N = 7 (since it has 14 - 7 = 7 neutrons)
Mass of proton = 1.0078 u
Mass of neutron = 1.00867 u
Mass of nitrogen nucleus = 14.00307 u
Substituting these values into the formula, we get:
Binding energy = (7 x 1.0078) + (7 x 1.00867) - 14.00307 = 104.69794 u
Converting the binding energy to MeV, we get:
Binding energy = 104.69794 u x 931.5 MeV/u = 97,277.52 MeV
The binding energy per nucleon can be calculated by dividing the binding energy by the number of nucleons in the nucleus:
Binding energy per nucleon = Binding energy / Number of nucleons
For the nitrogen nucleus, the number of nucleons is 14:
Binding energy per nucleon = 97,277.52 MeV / 14 = 6,948.39 MeV/nucleon
Know more about binding energy here:
https://brainly.com/question/30073915
#SPJ11
what is the osmotic pressure of a 100 mm sucrose solution at 25 oc?
The osmotic pressure of a 100 mM sucrose solution at 25°C is 2.448 atm.
How to calculate the osmotic pressure of a solution?Osmotic pressure refers to the pressure exerted by a solution across a semipermeable membrane due to the movement of solvent molecules from an area of lower solute concentration to an area of higher solute concentration. To calculate the osmotic pressure of a 100 mM sucrose solution at 25°C, we will use the following formula:
Osmotic Pressure (π) = nRT/V
where:
n = moles of solute
R = gas constant (0.0821 L atm/mol K)
T = temperature in Kelvin (K)
V = volume of solution in liters
First, we need to convert the temperature to Kelvin:
T = 25°C + 273.15 = 298.15 K
Next, we need to determine the moles of solute (sucrose) in the solution:
Since the solution is 100 mM (millimolar), this means there are 100 millimoles (mmol) of sucrose per liter of solution. Assuming we have a 1-liter solution:
n = 100 mmol/L * 1 L = 100 mmol
n = 100 * 10^(-3) mol = 0.1 mol (converted from millimoles to moles)
Now, we can plug the values into the formula:
π = (0.1 mol)(0.0821 L atm/mol K)(298.15 K) / 1 L
π = 2.448 atm
To know more about Osmotic Pressure:
https://brainly.com/question/14297982
#SPJ11
In fruit flies, red eyes are dominant (E). White eyes are recessive (e). If the female fly has white eyes and the male fly has homozygous dominant red eyes, what are the possible phenotypes and genotypes of their offspring?
The fruit fly female must be homozygous recessive for the gene encoding for eye color because she has white eyes. (ee).
How are genotypes determined?The male fly has homozygous red eyes that are dominant. (EE). As a result, each of their children will have one allele from each parent, giving each of them the genotype Ee.
All progeny will have the dominant of red eyes because the red eye allele (E) is dominant over the white eye allele (e). As a result, although having distinct genes, every child will inherit the identical phenotypic of red eyes. (Ee).
As a result, all of the offspring's potential phenotypes—red eyes and heterozygous genotypes—are possible. (Ee).
Learn more about phenotypes here:
brainly.com/question/20730322
#SPJ1
1. For the reaction C + 2H2 → CH4, how many grams of carbon are required to produce 19.5 moles of methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element Molar Mass
Hydrogen 1
Carbon 12
2. For the reaction C + 2H2 → CH4, how many moles of carbon are needed to make 119.4 grams of methane, CH4 ?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Carbon
12
3. 2 NH3 + 3 CuO --> 3 Cu + N2 + 3 H2O
In the above equation how many moles of N2 can be made when 127.4 grams of CuO are consumed?
Round your answer to the nearest tenth. If you answer is a whole number like 4, report the answer as 4.0
Use the following molar masses. If you do not use these masses, the computer will mark your answer incorrect.:
Element
Molar Mass
Hydrogen
1
Nitrogen
14
Copper
63.5
Oxygen
16
Answer:
1) 234,0 g 2) 7,5 3) 0,5
Explanation:
1) Since the stoichiometric coefficients of carbon and methane are equal, the moles of carbon needed are the same as the moles of methane produced. Therefore the mass of carbon needed can be calculated as follows
[tex]m = 19.5 \times 12 = 234.0[/tex]
2)This exercise is comparable to the former one. Since the stoichiometric coefficients are the same, the moles of methane procured and the moles of the carbon needed are the same.
The molar mass of methane is 12 + 1 × 4 = 16
[tex]n_{C} = \frac{119.4 g}{16} =7.5[/tex]
3) In this case, the stoichiometric coefficients are not equal. In order to produce 1 mole of nitrogen, 3 moles of CuO (copper (II) oxide) are needed. Therefore, the number of moles of CuO consumed must be divided by 3 in order to get the moles of nitrogen produced.
Molar mass of CuO = 63,5 + 16 = 79.5
[tex]n_CuO = \frac{127,4 g}{79,5} = 1,6 mol \\ n_{N2} = \frac{1,6}{3} = 0,5 mol[/tex]
atoms or molecules of this state of matter can change shape to any container but do not necessarily occupy the whole space of the container.
The state of matter you are referring to is the liquid state.
In this state, atoms or molecules can change shape to fit the container they are in, but they do not necessarily occupy the whole space of the container, as they are held together by intermolecular forces, giving liquids a definite volume.
The liquid state of matter is one of the four fundamental states of matter, along with solid, gas, and plasma.
In the liquid state, atoms or molecules are in constant motion, but they are still close enough to each other to be held together by intermolecular forces, such as hydrogen bonds, van der Waals forces, and other attractive forces.
One of the key characteristics of liquids is that they have a definite volume, which means that they maintain a fixed amount of space regardless of the shape of the container they are in.
This is because the intermolecular forces prevent the atoms or molecules from spreading out to fill the entire container. Instead, they tend to occupy the bottom of the container due to gravity, forming a level surface known as the liquid's free surface.
However, liquids do not have a definite shape and can change shape to fit the container they are in. This property is known as fluidity, and it allows liquids to flow and take the shape of their container.
To learn more about plasma, refer below:
https://brainly.com/question/13153516
#SPJ11
A compound is isolated from the rind of lemons that is found to be 88 14% carbon and 11 86% hydrogen by mass. How many grams of C and H are there in a 240.0 g sample of this substance? Express your answers using one decimal place separated by a comma.
In a 240.0 g sample of the compound, there are approximately 211.5 g of carbon and 28.5 g of hydrogen. 211.5, 28.5
To find the grams of C and H in a 240.0 g sample of the compound, we need to first calculate the mass percentages of C and H in the compound:
- Mass percent of C: 88.14%
- Mass percent of H: 11.86%
This means that in 100 g of the compound, there are:
- 88.14 g of C
- 11.86 g of H
To find the grams of C and H in a 240.0 g sample, we can use proportions:
- Grams of C = (240.0 g) x (88.14 g C/100 g compound) = 211.5 g C
- Grams of H = (240.0 g) x (11.86 g H/100 g compound) = 28.5 g H
Therefore, there are 211.5 grams of C and 28.5 grams of H in a 240.0 g sample of this compound.
Learn more about compound here:
https://brainly.com/question/6769323
#SPJ11
3. would a drying tube hurt or help in the synthesis of benzocaine? why or why not?
A drying tube would help in the synthesis of benzocaine.
Benzocaine synthesis usually involves an esterification reaction between p-aminobenzoic acid and ethanol or methanol in the presence of a strong acid catalyst.
In this reaction, the carboxylic acid group in p-aminobenzoic acid and the alcohol group in ethanol or methanol react to form an ester bond, with the elimination of a water molecule as a byproduct.
However, the presence of water in the reaction mixture can cause the reaction to be reversible, leading to a reduced overall yield of benzocaine. Therefore, it is essential to use a drying tube to remove water from the reaction environment.
A drying tube typically contains a drying agent, such as calcium chloride or magnesium sulfate, which has a high affinity for water. As the reaction mixture passes through the drying tube, any remaining water molecules are adsorbed by the drying agent, thereby removing them from the reaction environment.
This helps to ensure that the esterification reaction proceeds efficiently and yields a higher amount of benzocaine.
In summary, using a drying tube in the synthesis of benzocaine helps to remove water from the reaction environment, which is essential for ensuring that the esterification reaction proceeds efficiently and yields a higher amount of benzocaine.
To know more about "Acid" refer here:
https://brainly.com/question/3421848#
#SPJ11
Calculate the cell potential, E, for a silver-silver chloride electrode immersed in 0.800 M KCl at 25 'C. [Ag+ + e-→ Ag, E. = 0.799 V: Ksp = 1.8 x 10-10] (A) 1.37V (B) 0.80V (C) 0.57 (D) 0.23V
The cell potential, E, for a silver-silver chloride electrode immersed in 0.800 M KCl is E = 0.23 V.
The voltage of an electrochemical cell is referred to as cell potential, and its value may be influenced by pressure, concentration, and temperature. The electrical potential difference between two electrodes is used to compute the cell potential in order to ascertain the amount of energy that may be transmitted. Depending on its composition, each electrochemical cell may have a distinct value. Additionally, electrochemical cells are connected in series to raise the voltage of the cell.
For AgCl
AgCl → Ag⁺ + Cl⁻
KCl = 0.80 M
Cl⁻ = 0.80 M
As, [tex]K_S_P[/tex] = [Ag⁺][Cl⁻]
1.8 x 10⁻¹⁰ = [Ag⁺][0.80]
[Ag⁺] = 2.25 x 10⁻¹⁰ M
By using the Nernst equation:
[tex]E=E^o-\frac{0.0591}{n} logQ[/tex]
Q = 1/[Ag⁺]
So,
[tex]E=0.7999-\frac{0.0591}{1} log(\frac{1}{2.25*10^{-10}} )[/tex]
E = 0.799 + 0.0591 x [log(2.25) + log(10⁻¹⁰)]
E = 0.799 + 0.0591[0.35-10]
E = 0.799 - 0.570
E = 0.228
E = 0.23 V.
A redox reaction occurs when the net atomic charge changes in an electrochemical cell. Redox reaction, also known as oxidation-reduction reaction, is the transfer of electrons from one reactant to another. There are two half-reactions in a redox reaction: reduction and oxidation. The electrode becomes more negative as a result of gaining electrons during the reduction process. The cathode is where the reduction process takes place. In the oxidation phase, electrons are lost, and as a result, the electrode becomes more positively charged. At the anode, the oxidation process takes place. The reducer is the component of the chemical process that loses the electron, and the oxidizer is the component that causes the other component to lose electrons.
Learn more about Cell potential:
https://brainly.com/question/30088309
#SPJ4
00. determine if each compound is more soluble in acidic solution than it is in pure water. explain. a. hg2br2 b. mg(oh)2 c. caco3
a. Hg2Br2: This compound is more soluble in acidic solution than in pure water.
b. Mg(OH)2: This compound is also more soluble in acidic solution than in pure water.
c. CaCO3: The solubility of this compound is higher in acidic solution than in pure water.
a. Hg2Br2 - This compound is more soluble in acidic solution than in pure water. In acidic solution, the Hg2Br2 will react with the excess H+ ions to form the complex ion [HgBr4]2-. This complex ion is more soluble than the original compound, thus increasing its solubility in acidic solution.
b. Mg(OH)2 - This compound is less soluble in acidic solution than in pure water. In acidic solution, the excess H+ ions will react with the OH- ions of Mg(OH)2 to form water, which will decrease the concentration of OH- ions and lower the solubility of the compound.
c. CaCO3 - This compound is less soluble in acidic solution than in pure water. In acidic solution, the excess H+ ions will react with the CO3^2- ions of CaCO3 to form H2CO3 (carbonic acid), which will then decompose into CO2 and water. This reaction will lower the concentration of CO3^2- ions, reducing the solubility of the compound.
To learn more about compound visit;
https://brainly.com/question/13516179
#SPJ11
For the reaction K = 1.8 × 10−7 at a particular temperature. If the equilibrium system is analyzed and it is found that [O2] = 0.0012 M, what is the concentration of O3 in the system?
The concentration of O₃ in the system can be calculated using the equilibrium constant expression: K = [O₃]²/[O₂] = 1.8 × 10⁻⁷.
Rearranging the equation, [O₃]² = K[O₂] = 1.8 × 10⁻⁷ × 0.0012 = 2.16 × 10⁻¹⁰. Taking the square root of both sides, [O₃] = 1.47 × 10⁻⁵ M.
The given equilibrium constant K relates the concentrations of the products and reactants at equilibrium. For this reaction, the equilibrium constant expression is K = [O₃]²/[O₂]. Given that K = 1.8 × 10⁻⁷ and [O₂] = 0.0012 M, we can solve for [O₃].
Rearranging the equation, [O₃]² = K[O₂]. Substituting the values, we get [O₃]² = 1.8 × 10⁻⁷ × 0.0012 = 2.16 × 10⁻¹⁰. Taking the square root of both sides gives the concentration of O₃ in the system as 1.47 × 10⁻⁵ M.
To know more about equilibrium constant click on below link:
https://brainly.com/question/31321186#
#SPJ11
you find that the delta h of a solution is 105.2kj/mol and the delta s of the same solution is found to be 54.1kj/mol*k at 254k. what is the solnG of the solution? Is the reaction exothermic or endothermic? Are the reactants or products favorable?
The delta h of a solution is 105.2kj/mol and the delta s of the same solution is found to be 54.1kj/mol*k at 254k. what is the solnG of the solution:
To determine the sol n G (ΔG) of the solution, we will use the Gibbs free energy equation:
ΔG = ΔH - TΔS
Given the values:
ΔH = 105.2 kJ/mol
ΔS = 54.1 J/mol*K (note that it should be J/mol*K, not kJ/mol*K)
T = 254 K
Now, we can calculate ΔG:
ΔG = 105.2 kJ/mol - (254 K * 54.1 J/mol*K * (1 kJ/1000 J))
ΔG = 105.2 kJ/mol - (254 K * 0.0541 kJ/mol*K)
ΔG ≈ 105.2 kJ/mol - 13.7 kJ/mol
ΔG ≈ 91.5 kJ/mol
The solnG of the solution is approximately 91.5 kJ/mol. Since ΔH is positive, the reaction is endothermic. A positive ΔG indicates that the reaction is non-spontaneous, meaning the reactants are more favorable than the products under the given conditions.
To know more about Gibbs free energy:
https://brainly.com/question/13318988
#SPJ11
Discuss the regulation of citrate synthase and explain why the effectors NADH, ATP and succinyl CoA make sense.The rate of flow is limited by the availability of the citrate synthase substrates, oxaloacetate and acetyl- CoA, or of NAD+, which is depleted by its conversion to NADH.• The enzyme is inhibited by high ratios of [ATP]/[ADP] and [NADH]/[NAD], as high concentrations of ATP and NADH show that the energy supply is high for the cell. This is to make sure not more NADH is produced that is converted into ATP. Similarly, when enough ATP is around, the introduction of acetyl-CoA into the pathway is inhibited.
The regulation of citrate synthase is important for maintaining cellular energy balance. The enzyme is inhibited by effectors such as NADH, ATP, and succinyl CoA, which makes sense due to their roles in cellular energy metabolism.
Citrate synthase catalyzes the reaction between oxaloacetate and acetyl-CoA to form citrate, a key step in the citric acid cycle. The rate of this reaction is limited by the availability of substrates oxaloacetate, acetyl-CoA, and NAD+, which gets converted to NADH during the cycle.
High concentrations of NADH and ATP indicate that the cell has sufficient energy supply. In such cases, citrate synthase is inhibited to prevent excessive production of NADH, which would ultimately lead to more ATP generation. This ensures that the cell does not produce more energy than needed.
Similarly, when there is an abundance of ATP, the enzyme is inhibited to prevent the introduction of acetyl-CoA into the citric acid cycle. This allows the cell to maintain an optimal energy balance by preventing unnecessary energy production.
In conclusion, the regulation of citrate synthase by effectors such as NADH, ATP, and succinyl CoA is crucial for maintaining cellular energy homeostasis. By responding to the concentrations of these molecules, citrate synthase helps to ensure that the cell produces the appropriate amount of energy for its needs.
To know more about Citrate synthase:
https://brainly.com/question/14845050
#SPJ11
The CI-C-Cl bond angle in the CCl2O molecule (C is the central atom) is slightly ____. O greater than 109.5° Ogreater than 90° Oless than 109.5 Oless than 120° Ogreater than 120°
The CI-C-Cl bond angle in the [tex]CCl_{2}O[/tex] molecule (C is the central atom) is slightly less than 109.5°.
The CI-C-Cl bond angle in the [tex]CCl_{2}O[/tex] molecule is slightly less than 109.5°. This can be explained by the presence of a lone pair of electrons on the central atom (C) in addition to the surrounding atoms (Cl and O). The lone pair of electrons on the central atom exerts greater repulsion compared to the bonding electron pairs.
This electron-electron repulsion compresses the bond angles, causing them to be slightly less than the ideal tetrahedral angle of 109.5°. The lone pair-bond pair repulsion dominates over the bond pair-bond pair repulsion, leading to a smaller bond angle in the [tex]CCl_{2}O[/tex] molecule.
Learn more about bond angle, here:
https://brainly.com/question/31324226
#SPJ12