What's the relationship between the volume of the pyramid inscribed in a cube and the volume of the cube?

The error in the statement will be When reporting correlation, one does not report units because correlation has no units that is option D is correct.

The correct statement would be "The correlation between shoe size and height is 0.87." The correlation coefficient is a measure of the strength and direction of a linear relationship between two variables. It ranges from -1 to 1, with -1 indicating a strong negative relationship, 0 indicating no relationship, and 1 indicating a strong positive relationship. The correlation coefficient does not have units because it is a standardized measure of the relationship between the variables. If there is a unit given in any correlation statement then it means that the statement is a wrong statement or it has an error.

Learn more about Correlation at:

brainly.com/question/4219149

#SPJ4

Answer:

0.3 or 3/10

Step-by-step explanation:

First guess:

chance it is right: 2/5

chance it is wrong: 3/5

Second guess, if first is right:

chance it is right: 1/4

chance it is wrong: 3/4

therefore we multipy 2/5 and 3/4 and get a simplified answer of 3/10

By using the formula for the distance between two points we will see that the distance between the two points is √80 is 8.9

The length of the line connecting two places represents the distance between them. Subtracting the different coordinates will reveal the distance if the two points are on the same horizontal or vertical line.

Learn how to apply the Pythagorean theorem to find the distance between two points using the distance formula. The Pythagorean theorem can be rewritten as d=(((x 2-x 1)2+(y 2-y 1)2) to calculate the separation between any two locations.

The general formula for the distance between two points (a, b) and (c, d) is:

Distance = √[(a-d)²+(b - c)²]

In this case, we have the points (-4,1) and (4,5), replacing that in the above formula we get:

Distance = √[(-4-4)²+(1-5)²]

= √80

=8.9

Therefore the distance between the two points (-4,1) and (4,5) is 8.9

To learn more about distance refer to :

https://brainly.com/question/17273444

#SPJ1

The value of [tex]-4^{-2}[/tex] without Exponent is  [tex]\frac{1}{16}[/tex]

The exponent of a number indicates how many times a number has been multiplied by itself. For instance, 3^4 indicates that we have multiplied 3 four times. Its full form is 3×3×3×3. Exponent is another name for a number's power. A whole number, fraction, negative number, or decimal are all acceptable.

How many times we must multiply the reciprocal of the base is indicated by a negative exponent. For instance, if a^-n is provided, it can be stretched to 1/a^n. It implies that we must multiply 1/a 'n' times, which is the reciprocal of a. When writing exponentiated fractions, negative exponents are employed.

Given;

(-4)⁻² , That implies we have to multiply reciprocal of -4 "2" times .

⇒[tex]\frac{1}{-4}[/tex]×[tex]\frac{1}{-4}[/tex]=[tex]\frac{1}{16}[/tex]

The value of [tex]-4^{-2}[/tex] without Exponent is  [tex]\frac{1}{16}[/tex]

To refer more about Exponents, visit:

https://brainly.com/question/13669161

#SPJ1

Answer:

1/2

Step-by-step explanation:

(Solving cos first)

= cos15 cos 45

= (√6 + √2)/4 * (√2) / 2

= (1 + √3) / 4

(solving sin)

= sin15 sin45

=  (√6 - √2)/4 * (√2) / 2

= (-1 + √3) / 4

(Subtracting both)

= (1 + √3) / 4 -  (-1 + √3) / 4

= 1/2

I hope my answer helps you.

Answer:

(solving sin)

= sin15 sin45

=  (√6 - √2)/4 * (√2) / 2

= (-1 + √3) / 4

(Subtracting both)

= (1 + √3) / 4 -  (-1 + √3) / 4

= 1/2

Step-by-step explanation:

The mean of number of students who read fictional books is 4.32.

In statistics, the mean refers to the average of a set of values. The mean can be computed in a number of ways, including the simple arithmetic mean (add up the numbers and divide the total by the number of observations).

Given that, the summary of fictional books read by 37 students.

Total number of students =37

Sum =4(2)+10(3)+13(4)+10(7)

= 8+30+52+70

= 160

Now, mean =160/37

= 4.32

Therefore, the mean of number of books read by students is 4.32.

To learn more about an arithmetic mean visit:

https://brainly.com/question/15196910.

#SPJ1

The stone face is approximately 57.8512 feet in height.

Height is a mathematical term that refers to the vertical distance between an object's top and base.

Sometimes, it has the designation "altitude."

The measurement of an item along the y-axis in coordinate geometry is referred to as height in geometry.

So, let h be the stone's face's height.

One sight is 750 feet away from the mountain's base, and there is a 33° elevation difference between it and the bottom of the face.

The distance between the mountain's base and the base of the stone face

= 750 * tan33°

= 750 * 0.64940759319

= 487.055694898

A different location, which is 36° in elevation and 750 feet from the mountain's base, can be seen from the summit of the face.

The separation between the mountain's base and the top of the stone face = (h + 487.055694898) ft

Now, using trigonometry:

h + 487.055694898/750 = tan36°

h + 487.055694898 = 0.726542525 * 750

h = 544.906896004 - 487.055694898 = 57.8512011059 = 57.8512

Therefore, the stone face is approximately 57.8512 feet in height.

Know more about height here:
https://brainly.com/question/28122539

#SPJ4

Correct question:
To measure a stone face carved on the side of a​ mountain, two sightings 750 feet from the base of the mountain are taken. if the angle of elevation to the bottom of the face is 33° and the angle of elevation to the top is 3636°​, what is the height of the stone​ face?

As per the concept of ANOVA, the larger the differences among the sample means, the larger the numerator of the F-ratio will be True.

Here we have given that if it is true whether the larger the differences among the sample means the larger the numerator of the F-ratio will be.

In order to find that, we must know the definition of F - ratio.

The term f - ratio is defined as the ratio of the between group variance to the within group variance.

While we consider the given situation, here for both repeated-measures design and independent-measures design then the F-ratio compares the actual mean differences between treatments with the amount of difference that would be expected if there were no treatment effect.

Based on these theory we have identified that the statement is true.

To know more about Ratio here.

https://brainly.com/question/13419413

#SPJ4

The mass and center of mass of the lamina that occupies the region D and has the given density function p is 57/14 and (14/27, 7/18) respectively.

The center of mass (x―,y―) of a lamina with density function ρ(x,y) is given by

x = M(y)/m, y = M(x)/m

Where, m=∫∫[tex]_{D}[/tex]ρ(x,y)dA

Mx=∫∫[tex]_{D}[/tex] yρ(x,y)dA

My=∫∫[tex]_{D}[/tex] xρ(x,y)dA

Given that, D is bounded by y=x^2 and x=y^2

And ρ(x,y)=19√x

Now, for the point of intersection of y=x^2,x=y^2

we have,

x = (x^2)^2

x = x^4

Subtract x^4 on both side

x - x^4 = 0

x(x^3−1) = 0

x = 0, 1

Now, x=0⇒y=0 and x=1⇒y=1

The points of intersection are (0,0),(1,1)

So, the region D can be written as

D={(x,y): 0≤x≤1, x^2≤y≤x}

So,

m = [tex]\int_{0}^{1}\int_{x^2}^{\sqrt x}19 \sqrt xdydx[/tex]

m = [tex]19\int_{0}^{1}\sqrt{x}[y]^{x^2}_{x}dx[/tex]

m = [tex]19\int_{0}^{1} \sqrt x(\sqrt{x}-x^2)dx[/tex]

m = [tex]19\int^{1}_{0}(x-x^{5/2})dx[/tex]

m = [tex]19[\frac{x^2}{2}-\frac{x^{7/2}}{7/2}]^1_{0}[/tex]

m = [tex]19[\frac{1}{2}(1^2-0)-\frac{2}{7}(1^{7/2}-0)][/tex]

m = 19(1/2−2/7)

m = 57/14

m = 5714

Now,

Mx = [tex]\int_{0}^{1}\int_{x^2}^{\sqrt x}(19xy)dydx[/tex]

Mx = 19[tex]\int^{1}_{0}x[\frac{y^2}{2}]_{x^2}^{\sqrt x}dx[/tex]

Mx = [tex]\frac{19}{2}\int^{1}_{0}x[(\sqrt{x})^2-(x^2)^2}dx[/tex]

Mx = [tex]\frac{19}{2}\int^{1}_{0}(x^2-x^5)dx[/tex]

Mx = [tex]\frac{19}{2}[\frac{x^3}{3}-\frac{x^6}{6}]_{0}^{1}[/tex]

Mx = [tex]\frac{19}{2}[\frac{1}{3}(1^3-0)-\frac{1}{6}(1^6-0)][/tex]

Mx = 19/2 (1/3−1/6)

Mx = 19/12

And

My = [tex]\int^{1}_{0}\int_{x^2}^{\sqrt x}x(19\sqrt{x})dydx[/tex]

My = [tex]19\int_{0}^{1}x^{3/2}[y]^{\sqrt{x}}_{x^2}dx[/tex]

My = [tex]19\int_{0}^{1}x^{3/2}(\sqrt{x}−x^2)dx[/tex]

My = [tex]19\int_{0}^{1}(x^2-x^{7/2})dx[/tex]

My = [tex]19[\frac{x^3}{3}-\frac{x^{9/2}}{9/2}]_{0}^{1}[/tex]

My = 19[1/3(1^3−0)−2/9(1^{9/2}−0)]

My = 19(1/3−2/9)

My = 19/9

So, x = My/m

x = (19/9)/(57/14)

x = (19/9)×(14/57)

x = 14/27

y = Mx/m

y = (19/12)/(57/14)

y = (19/12)×(14/57)

y = 7/18

Therefore, the solutions are (14/27, 7/18).

To learn more about mass and center of mass of the density function link is here

brainly.com/question/15089285

#SPJ4

The complete question is given below:

In total, Menaha traveled 97km 1000m (97.1km).

Distance is a numerical measurement of how far apart two objects, points, or places are in space. Distance can be measured in linear units such as meters, kilometers, feet, miles, etc. It can also be measured in angular units such as degrees or radians.

Distance can also refer to the space between two points in time, such as the time between two events. Distance can be used to measure physical distance, time, or even emotional distance.
To calculate this, the two distances must be added together.
The train distance is =86km 520m (86.52km)

and the car distance is =11km 480m (11.48km).
When added together, =86km 520m+11km 480m = 97.52km.
However, since the distances are measured in km and m,
it is necessary to convert the measurements into a single unit of measurement.
To do this, the measurements must be converted into metres.
The train distance is 86,520 metres

And the car distance is 11,480 metres.
When added together,

the total distance is 97,000 metres (97km).

To know more about distance click-
https://brainly.com/question/23848540
#SPJ4

Answer:

Hi! The answer is 120 Db.

Hope it helps!

Galileo's discovery was that the period of swing of a pendulum is independent of its amplitude--the arc of the swing--the isochronism of the pendulum.

Christiaan Huygens, a Dutch mathematician, astronomer, physicist, and horologist, created the pendulum clock in 1656 and received a patent for it in 1657. With the help of this technology, clocks now lose less than 15 seconds every day instead of nearly 15 minutes.

Huygens was motivated by Galileo Galilei's pendulum research, which he began in about 1602. Isochronism, or the fact that a pendulum's period of swing is about the same for swings of all sizes, is the main characteristic that makes pendulums ideal timekeepers, was discovered by Galileo.

Galileo came up with the concept for a pendulum clock in 1637, and his son started building one in 1649, but neither of them survived to see it completed. The precision of clocks was greatly improved by the advent of the pendulum, the first harmonic oscillator used for timekeeping, going from around 15 minutes per day to 15 seconds per day.

To know more about time visit: brainly.com/question/28050940

#SPJ4

Galileo made the discovery that a pendulum's period of swing is independent of its amplitude, or the swing's arc, or the isochronism of the pendulum.

The pendulum clock was developed in 1656 by Dutch mathematician, astronomer, physicist, and horologist Christiaan Huygens, who also got a patent for it in 1657. With the use of this technology, clocks no longer lose roughly 15 minutes of time each day, but rather lose less than 15 seconds.

Galileo Galilei's pendulum research, which he started about 1602, inspired Huygens. Galileo discovered isochronism, or the fact that a pendulum's period of swing is roughly the same for swings of all sizes, which is the main quality that makes pendulums great timekeepers.

The idea for a pendulum clock was developed by Galileo in 1637, and his son began construction on one in 1649, but neither of them lived to see it finished. With the invention of the pendulum, the first harmonic oscillator used for timekeeping, the accuracy of clocks was substantially increased, decreasing from roughly 15 minutes per day to 15 seconds per day.

The measure of the altitude of the triangle shown in the figure given below is  15 inches .

The Altitude of the triangle is defined as the perpendicular distance from the top vertex of the triangle to the base of the triangle.

Also , the altitude of a right triangle is same as height of triangle.

If in the right triangle , the length of altitude is "a units" ,

the length of base is "b units " , and the length of hypotnuse is "c units" .

So , the altitude can be calculated using the formula : a = √(c² - b²) .

from the figure given below , we can see that , c = 25  and b = 20

we get , a = √(25² - 20²)

a = √(625 - 400)

a = √225 = 15 inches .

Therefore , measure of the altitude in the figure is 15 inches .

The given question is incomplete , the complete question is

How do you find the altitude of the triangle shown in the figure given below ?

Learn more about Altitude here

https://brainly.com/question/1014034

#SPJ4

The fraction 3/4 is equivalent to 0.75, or 75%. This means that 3 out of every 4 parts is equal to 75%.

Fraction is a numerical expression that represents a part of a whole. It is represented by a numerator (top number) and a denominator (bottom number). The numerator shows how many parts of the whole are being considered, and the denominator represents the total number of parts that make up the whole. Fractions are used in everyday life, from dividing food and measuring distances to calculating discounts and percentages.

This fraction can also be expressed as a decimal, a percent, or as a mixed number.For example, 3/4 can be written as 0.75, 75%, or 3 1/4.
To know more about fraction click-
https://brainly.com/question/78672
#SPJ4

Answer:

The answer is 6k⁷ - 10k⁴ + 10k³

Step-by-step explanation:

-2k³ (-3k⁴ + 5k - 5)

6k⁷ - 10k⁴ + 10k³

Thus, The answer is 6k⁷ - 10k⁴ + 10k³

Answer:

x+2-x+3

x-x+2+3

2+3

5

2x+x-2-2x-1

2x-2x+x-2-1

x-2-1

x-3

Step-by-step explanation:

What is the formula for mean median and mode?

Mean: is the average of values

Median: center most value when values are arranged in numerical order

Mode: most frequent occurring value

_______________________________________

Example

Given values: 0 , 3 , 2 , 10 , 11 , 31 , 2

mean: (0 + 3 + 2 + 10 + 11 + 31 + 2)/7  = 8.429

median: 0 , 2 , 2 , 3 , 10 , 11 , 31

mode: 2 (because 2 shows up twice and the others numbers only once)

The x-intercept and coordinate of the vertex of the given parabola will be x = 1,7 and (4,-9) respectively.

A pair of numbers that employ the horizontal and vertical distinctions from the two reference axes to represent a point's placement on a coordinate plane. typically expressed by the x-value and y-value pairs (x,y).

As per the given parabola,

y = x² - 8x + 7

At x-intercept, y = 0

x² - 8x + 7 = 0

x² - 7x - x + 7 = 0

x(x - 7) - (x - 7) = 0

(x - 1)(x - 7) = 0

x = 1,7

For the vertex, the slope will be zero,

y' = 2x - 8 + 0 = 0

2x = 8

x = 4

Thus, y = 4² - 8 x 4 + 7

y = -9

Thus, the coordinate of the vertex is (4,-9)

Hence "The given parabola's x-intercept and vertex coordinates are x = 1,7 and (4,-9), respectively.".

For more about coordinates,

brainly.com/question/7869125

#SPJ1

Answer:

sqrt{9(x-4)} - 4

3sqrt{x-4} - 4

Step-by-step explanation:

the third option

Answer: C

Step-by-step explanation:

The equation of the circle in standard form from the given graph is

x² + y² + 2x + 2y - 45 = 0

A circle is a two-dimensional figure with a radius and circumference of 2πr

The standard equation of a circle is (x - h)² + (y - k)² = r²

Where (h, k) is the center of the circle

We have,

The standard equation of a circle is (x - h)² + (y - k)² = r²

The coordinates of the center of the circle from the figure.

= (-1, -2)

This means,

(-1, -2) = (h, k)

The radius of the circle is 5√2.

The distance between (-1, -2) and (-6, 3).

= √(-6 + 1)² + (3 + 2)²

= √(25 + 25)

= √50

= 5√2

Now,

The standard equation of a circle is (x - h)² + (y - k)² = r²

(x + 1)² + (y  + 2)² = 50

x² + 2x + 1 + y² + 2y + 4 = 50

x² + y² + 2x + 2y - 45 = 0

Thus,

The equation of the circle is x² + y² + 2x + 2y - 45 = 0

Learn more about circle here:

https://brainly.com/question/11833983

#SPJ1

SAS is a similarity postulate through which we can find if a given two triangles are similar or not

SAS postulate:( side angle side)

It states that if the two sides and one angle of two triangles are equal then the two triangles are said to be similar.

Let the angles ∠ABC, ∠BCA, and AB of triangle ΔABC is equal to angles∠ XYZ and ∠YZX and XY of triangle ΔXYZ then can say that triangle ABC is similar to triangle XYZ, and their remaining sides and angles will be also equal.

SAS is a similar theorem to prove that two triangles are equal.

Learn more about SAS postulate:

https://brainly.com/question/29792707

#SPJ4

Two congruent figures are similar can be proved by using theorem of similarity given by : SSS, SAS, ASA, AA, and RHS.

Congruent figures are also representing similar figure can be proved in the following ways:

Therefore, two congruent figures are similar proved by theorem of similarity given by : SSS, SAS, ASA, AA, and RHS.

learn more about congruent here

brainly.com/question/12413243

#SPJ4

If there is a y-intercept, we can find it by plugging a zero for x and evaluating the function. If this produces an undefined value, then there is no y-intercept. To find the x-intercept, set y to zero and solve for x.

Now, According to the question:

Logarithmic functions will always have an x-intercept, but they may not have a y-intercept. Let's look at a simple example:

                        y = [tex]log_1_0x[/tex]

A y-intercept would be located at the y value we get by plugging in a zero for x. The problem is that the function does not have zero as a part of its domain. It is not defined there, so there is no y-intercept. The x-intercept is the x value that causes y to be zero. For a basic logarithmic function like this, that is always x equals 1.

                            0 = [tex]log_1_0x[/tex]

                            [tex]10^0[/tex] = x

                            1 = x

Now we can shift, stretch, and reflect this model to change these results, but the basic idea is still the same. For example, let's consider this model:

                          y = [tex]log_1_0[/tex] (x + 100) + 2

As always, we look for a y-intercept by plugging in a zero for x. In this case, we do get an answer. This is because of the 100 that is added to the argument of the logarithm.

                          y = [tex]log_1_0[/tex] (0 + 100) + 2

                          y = 2 + 2 = 4

As always, to find the x-intercept, we set y to zero and solve for x

                              y = [tex]log_1_0[/tex] (x + 100) + 2

                             -2 =  [tex]log_1_0[/tex] (x + 100)

                             [tex]10^-^2[/tex]  = x + 100             [By taking antilog on both sides ]

                             0.01 = x + 100

                               x = -99.99

So, no matter what the logarithmic function is, we can find the intercepts in this way. If there is a y-intercept, we can find it by plugging a zero for x and evaluating the function. If this produces an undefined value, then there is no y-intercept. To find the x-intercept, set y to zero and solve for x.

Learn more about Logarithm at:

https://brainly.com/question/27389970

#SPJ4

We check the validity that i² is equal to -1

The first thing we will do is define numerical sets and complex numbers.

Numerical sets are groupings of numerical values that have a particularity in common, they can be integers, decimals, fractions, among others.

Among the numerical sets there is one that we call complex numbers, which include values that are not real, such as "i" a letter that denotes that it is an imaginary number.

The definition of a letter value that identifies a type of complex number is the "i" which is the result of the square root of -1, then we have:

√(-1) = i

√(-1) x √(-1) = i²

[√(-1)]² = i²

(-1) = i²

Learn more about complex numbers at:

brainly.com/question/12241782

#SPJ4

Answer:

(y2 - y1) / (x2 - x1)

Step-by-step explanation:

The equation that teacher taught to find the slope is

( y2 - y1) / (x2 - x1)

Answer:

x can be any number, which we need to find out in an equation

The nature of the roots of the quadratic equation 4[tex]x^{2}[/tex] - 8x + 9 =0 are imaginary.

given equation:

4[tex]x^{2}[/tex] - 8x + 9 =0

now we need to find the nature of the quadratic equation

nature of roots :

Case I: [tex]b^{2}[/tex] – 4ac > 0

When a, b, and c are real numbers, a ≠ 0 and the discriminant is positive, then the roots α and β of the quadratic equation ax2 +bx+ c = 0 are real and unequal.

Case II: [tex]b^{2}[/tex]– 4ac = 0

When a, b, and c are real numbers, a ≠ 0 and the discriminant is zero, then the roots α and β of the quadratic equation ax2+ bx + c = 0 are real and equal.

Case III: [tex]b^{2}[/tex]– 4ac < 0

When a, b, and c are real numbers, a ≠ 0 and the discriminant is negative, then the roots α and β of the quadratic equation ax2 + bx + c = 0 are unequal and not real. In this case, we say that the roots are imaginary.

Case IV: [tex]b^{2}[/tex] – 4ac > 0 and perfect square

When a, b, and c are real numbers, a ≠ 0 and the discriminant is positive and perfect square, then the roots α and β of the quadratic equation ax2 + bx + c = 0 are real, rational and unequal.

for the above given equation:

a = 4

b = -8

c = 9

=[tex]b^{2}[/tex] - 4ac

= [tex](-8)^{2}[/tex] - 4(4)(9)

= (56) -144

= -88< 0

the roots are imaginary

The nature of the roots of the quadratic equation 4[tex]x^{2}[/tex] - 8x + 9 =0 are imaginary

To learn more about quadratic equation:

https://brainly.com/question/29011747

#SPJ4

Answer:

Area of the figure =[tex]100.26[/tex]

Step-by-step explanation:

Firstly we need to find the area of the rectangle

[tex]Area \\ of \\rectangle= lb[/tex]

[tex]12X6\\= 72[/tex]

[tex]Area\\of \\the \\semicircles= \frac{\pi }{2} Xr^{2}[/tex][tex]X2[/tex]

= [tex]\frac{3.14}{2} X(3)^{2} X2[/tex]

=[tex]28.26[/tex]

Area of the figure = Area of rectangle + Area of the 2 semi circles

Area of the figure = [tex]72+28.26[/tex]

[tex]100.26[/tex]

Pls mark me brainliest

The mean of the data 2, 3, 4, 5,0, 1, 3, 3, 4, 3 is 2.8.

Mean is the average of the given numbers and is calculated by dividing the sum of given numbers by the total number of numbers.

The basic formula to calculate the mean is calculated based on the given data set. Each term in the data set is considered while evaluating the mean. The general formula for mean is given by the ratio of the sum of all the terms and the total number of terms. Hence, we can say;

Mean = Sum of the Given Data/Total number of Data

Mean= 2 +3 +4 +5 +0 +1 +3 +3 +4 +3 / 7 = 28/10 = 2.8

Hence, The mean of the data 2, 3, 4, 5,0, 1, 3, 3, 4, 3 is 2.8.

To know more about the mean visit: brainly.com/question/29895356

#SPJ4

The formula finds the difference between the lowest and highest value, which aids in locating the set's center.

The range of values between the highest and lowest values for a certain data collection is known as the statistical range. It is also possible to show the range by comparing the highest and lowest observational values. The sample interval is found by subtracting the highest value from the lowest. For continuously varying variables, the sample range is a key measure of variability.

here ,

Assign each number a value within the data collection, starting with the lowest and working your way up.

Take the highest value chosen from the data set and divide it by the lowest value using the range formula.

To know more about range visit :-

https://brainly.com/question/28135761

#SPJ4