Which climate zone has hot summers, cold winters, and average amounts of precipitation throughout the year?
A. Equator
B. Polar
C. Temperate
D. Tropical

Based on the information provided, there is a change of 12 Jules in the kinetic energy during segment 2.

Kinetic energy can be defined as the energy produced by the motion of a body. Due to this, the level of energy can change depending on movement. The change in the kinetic energy can be calculated by considering the initial kinetic energy and the final kinetic energy. Moreover, the energy is measured using Joules.

Let's consider first the information given:

Based on the velocity, let's caclulate the change in the kinetic energy:

Final Kinetic energy - Initial kinetic energy

1/2 x 0.5 (8^2-4^2) = 12 Joules

Learn more about kinetic energy in: https://brainly.com/question/26472013

#SPJ1

The angular velocity of a  geostationary satellite is 7 × 10⁻⁵rad/s.

A geostationary satellite is an earth-orbiting satellite that travels in the same direction as the earth's rotation and is positioned at a height of around 36000 kilometers.

One orbit takes place at this altitude in 24 hours, which is how long it takes the earth to complete one rotation of its axis.

Time period of revolution = 24 hour = 24 × 60 × 60 second.

Hence, angular velocity of it = total circular angle/Time period

= 2π /( 24 × 60 × 60 ) rad/s

= 7 × 10⁻⁵rad/s.

Learn more about  geostationary satellite here:

https://brainly.com/question/28766254

#SPJ1

The  Kinetic energy of the system T = 6m * b² * ω² / 2

The energy an object has as a result of motion is known as kinetic energy. A force must be applied to an object in order to accelerate it. We must put in effort in order to apply a force.

To find the kinetic energy of the system;

The kinetic energy of the bar OC is given by:

T_OC = 1/2 * m * b² * ω²

Note that:

m= Metre

b= Bar

ω = omega

The kinetic energy of the bar AB is given by:

T_AB = 1/2 * (2m) * (2b)² * ω²

The kinetic energy of the sliders A and B is given by:

T_A+B = 1/2 * m * v_A² + 1/2 * m * v_B²

where v_A and v_B are the velocities of sliders A and B, respectively.

To find the velocities of the sliders, we can use the relationship between the angular velocity of the bar OC and the linear velocities of the sliders:

v_A = b * ω * cos(φ)

v_B = b * ω * sin(φ)

Substituting these expressions into the equation for T_A+B, we get:

T_A+B = 1/2 * m * (b * ω * cos(φ))² + 1/2 * m * (b * ω * sin(φ))²

= 1/2 * m * b² * ω² * (cos^2(φ) + sin²(φ))

= 1/2 * m * b² * ω²

Since cos²(φ) + sin²(φ) = 1, the kinetic energy of the sliders is equal to the kinetic energy of the bar OC.

Finally, the total kinetic energy of the system is the sum of the kinetic energies of the three parts:

T = T_OC + T_AB + T_A+B

= 1/2 * m * b² * ω² + 1/2 * (2m) * (2b)^2 * ω² + 1/2 * m * b² * ω²

= (m+4m+m) * b² * ω²/ 2

= 6m * b² * ω² / 2

Therefore, the total kinetic energy of the system is given by:

T = 6m * b² * ω² / 2

Therefore, one should note  that this result does not depend on the value of φ, so it is not necessary to know the value of φ in order to find the kinetic energy of the system.

Learn more about Kinetic energy from

https://brainly.com/question/25959744

#SPJ1

The initial speed of the van of mass 2713 kg is 9.04 m/s.

Speed is the ratio of distance to time.

To calculate the initial speed of the van, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the initial speed of the van is 9.04 m/s.

Learn more about speed here: https://brainly.com/question/4931057

#SPJ1

A passive electrical component called a resistor prevents the flow of electric current by introducing resistance.

They are present in practically all electrical networks and electronic circuits. Ohms () are used to measure resistance.

An ohm is the resistance that develops when a resistor has a one volt (V) drop across its terminals and a current of one ampere (A). The voltage across the terminal ends determines how much current flows.

There are numerous applications for resistors. Among some examples are voltage division, heat production, matching and loading circuits, gain control, and time constant setup. They have resistance ratings that span more than nine orders of magnitude and are marketed for use in various applications.

Therefore, A passive electrical component called a resistor prevents the flow of electric current by introducing resistance.

To learn more about Resistors, refer to the link:

https://brainly.com/question/29100743

#SPJ1

To hit a fish that he sees beneath the water, he should aim directly at the fish.

We'll view the fish a little bit above that it is because of refraction.Therefore, aim your arrow and bow under it (which is its true depth).On the other side, the laser beam will experience refractive error as it reaches the water.Therefore, we should direct the laser beam directly onto the fish.

The foundation of human civilisation is water.Societies have advanced throughout history by increasing access to clean drinking water as drinking, sanitation, and agriculture, as well as by purifying water to benefit public health and the environment.

To know more about environment visit:

https://brainly.com/question/13107711

#SPJ4

The number of years required for the asteroid to make one revolution about the sun will be 4.55 years

What is the meaning of Kepler's third law?

According to Kepler's Third Law, the planets' squared orbital periods and cubes of their semi-major axes are directly inversely related. According to Kepler's Third Law, a planet's period of orbiting the Sun grows exponentially with its orbital radius.

The sun is at the focus of elliptical planetary orbits, according to the first law. The radius vector from the sun to a planet sweeps equal regions in equal amounts of time, according to the second law.

According to Kepler's Third Law,

T^2 is directly proportional to r^3

(T1/T2)^2 = (r1/r2)^3

Time taken by earth to complete 1 revolution, T1 = 1 year

Time taken by asteroid to complete 1 revolution T2

distance of earth r1 = r

distance of asteroid r2 = 4.55r

So,

1/T2 = r/4.55r

T2 = 4.55 years

To learn more about Kepler's laws use link below:

https://brainly.com/question/28728095

#SPJ4

Answer: 1968 cm3

Explanation: You first need to convert all of your dimensions to the same units.

240 mm = 24 cm

20.5 cm = 20.5 cm

0.04 m = 4 cm

Then volume is Length x width x height = 24 cm x 20.5 cm x 4 cm =

Answer:

try this

Explanation:

the cosmos just like humanity of earth its living like a mirror

Answer:

294

Explanation:

5x9.8x6=294

potential energy=5(9.8)(6)

Equation

PE=MGH

Answer:

17.96 s

Explanation:

To find the total time the ball was in the air, we need to first find the time it took to reach the top of its path and then double that time to find the total time in the air.

The time it took to reach the top of its path is given by: t = v/g

Substituting in the known values and solving for t, we get: t = 35 m/s / 9.8 m/s^2 = 8.98 s

To find the total time the ball was in the air, we need to double the time it took to reach the top of its path, so the total time in the air is: 2 * 8.98 s = 17.96 s

Rounding to the nearest hundredth, the total time the ball was in the air is 17.96 s. Therefore, the answer is 17.96.

The magnitude of the net force on the block while it is sliding is most nearly is 14m/s when A 2 kg block, starting from rest, slides 20 m down a frictionless inclined plane from X to Y, dropping a vertical distance of 10 m.

The Plane by which no opposite force is applied on the sliding or moving object is termed as  Frictionless plane.

To know more about magnitude visit

https://brainly.com/question/29766788

#SPJ1

The magnitude of R for a hollow circular cross section will be less than the magnitude of q for a solid circular cross section with the same outside diameter in the given diagram.

Circular Hollow Section member in the given circuit is loaded by a radial external lateral pressure that always acts normally to the cylindrical shell mid-surface, its direction depends on the shell deformation – the external pressure has a follower nature, remaining normal to the shell during and after deformation.

The area A of a circuit hollow cross-section, having radius R, and wall thickness t, can be found with the next formula where  the inner, hollow area radius. In terms of tube diameters, the above formula is equivalent.

Therefore, The magnitude of R for a hollow circular cross section will be less than the magnitude of q for a solid circular cross section with the same outside diameter in the given diagram.

Learn more about circuit on:

https://brainly.com/question/27206933

#SPJ1

1) Before the boiling point, the temperature of the water increases and it begins to boil. Boiling is the physical process by which a liquid changes to a gaseous state. It runs when the temperature of the entire liquid is equal to the boiling point of the liquid at that pressure. As the liquid continues to heat up, it absorbs heat, but without raising the temperature, it uses the heat to transform the substance from the liquid to the gaseous state, shifting the entire mass into the gaseous state. The heat that is generated in heating most of the liquid is called sensible heat, and the heat that appears during a change of state is called latent heat of boiling or vaporization.

2) Because iron is "closer" to its molecules, it can absorb more energy and, as a result, heat up faster. Instead, bricks have tiny air holes. That is, its molecules are "far away" and are not easily heated. As they conduct heat (conduction or convection), they lose energy.

3) When a piece of heated iron is placed in room temperature water, the iron gives off heat to the water (cooling) and the water receives heat (heating). Because the iron gives heat.

4) When you put a brick on top of an iron and heat it up, the iron heats up faster and starts heating the brick by conduction (because the material sticks together). In addition, the heat absorption capacity of the brick itself makes it warmer.

What is heat energy?

The term "thermal energy" is used loosely in various contexts of physics and engineering. We can refer to some well-defined physical concepts. These include the internal energy or enthalpy of matter and radiation. Heat (and thermodynamic work) defined as the mode of energy transfer. and the characteristic energies of the degrees of freedom of the system described by its microscopic particle content (where T denotes the temperature and Boltzmann constant).

To know more about heat energy visit:

https://brainly.com/question/19666326

#SPJ4

(a) The first block  moves at 4.0 m/s in the same direction right after colliding.

(b) the system's total kinetic energy changes by  28.75 J

(c) the system's total kinetic energy changes by -1.25 J

Given;

First block's mass, m1, is 5 kg.

u1 = 3.0 m/s is the first block's starting speed.

m2 weight of the second block is 10.0 kg.

u2 = 2.0 m/s is the second block's initial speed.

v2 = 2.5 m/s is the second block's final speed.

Immediately following the impact, the first block block's Part (A) velocity is as follows:

Apply the law of conservation of linear momentum: m1u1 + m2u2 = m1v1 + m2v2, where v1 is the speed of the first block after it collides.

(5 x 3.0) + (10 x 2.0) = 5.0v₁ + (10 x 2.5) (10 x 2.5)

35= 2.5v₁ + 25

2.5v₁ = 35-25

2.5v₁ = 10

v₁ = 10/2.5

v₁ = 4

2.5 m/s in the same direction for v1.

Change in the system's overall kinetic energy, part (B):

Final kinetic energy minus beginning kinetic energy equals the change in kinetic energy.

ΔK = (1/2m1v1^2 + 1/2m2v2^2) - (1/2m1u1^2 + 1/2m2u2^2)

ΔK is equal to (1/2 x 5 x 4^2 + 1/2 x 10 x 2.5^2) – (1/2 x 5 x 3^2 + 1/2 x 10 x 2^2).

ΔK = 71.25 J - 42.5 J

ΔK = 28.75 J

Change in part (C) of the system's total kinetic energy if the second block accelerates to 5.2 m/s

Determine the final speed of the first block using the conservation of linear momentum: m1u1 + m2u2 = m1v1 + m2v2 (5 x 3.0) + (10 x 2.0) = 5v1 + (10 x 4)

35 = 2.5v₁ + 40

2.5v₁ = -5

2.5v₁ = - 5 v₁ = - 5 / 2.5 \s v₁ = -2 m/s

Final kinetic energy minus beginning kinetic energy equals the change in kinetic energy.

K = (1/2m1v12 + 1/2m2v22) - (1/2m1u12 + 1/2m2u22)

K is equal to (1/2 x 5 x 22 + 1/2 x 10 x 2.52) - (1/2 x 5 x 3 + 1/2 x 10 x 2).

ΔK = 41.25 - 42.5 J

ΔK = -1.25 J

For more information on law of conservation of energy kindly visit to

https://brainly.com/question/29775341

#SPJ4

At height h, on the left side of a loop, a stone is let free from its resting position. h = v^2/(2 x g) + r must the stone be at in order to stay on the track at the top of the loop.

For a stone to not fall off the track at the top of a loop, it must be traveling fast enough to follow the track's curvature. This means that the stone must have a certain minimum speed at the top of the loop in order to complete it from resting position. The minimum speed required for the stone to complete the loop can be calculated using the equation v = sqrt(gr), where v is the minimum speed, g is the acceleration due to gravity, and r is the radius of the loop. Therefore, the minimum height h for which the stone will not fall off the track at the top of the loop can be calculated using the equation h = v^2/(2*g) + r, where h is the minimum height, v is the minimum speed, g is the acceleration due to gravity, and r is the radius of the loop.

To know more about position please refer: https://brainly.com/question/9573597

#SPJ4

Because mammals are warm blooded.

1.  bombardment of comets and meteorites 2. arrival of icy debris; 3. boiling of water due to Earth's enormous heat; 4. rising of water in the form of water vapor; 5. condensation of water vapor; 6. precipitation in the form of rainfall.

The millions of meteorites and comets that held the frozen particles that made up our planet's water brought it to us in the form of icy particles.

This frozen material was melting and boiling right away since the Earth was still incredibly hot. Water vapor increased in the Earth's atmosphere as more and more frozen particles arrived on our planet as a result of their boiling.

The water vapor began to condense as it rose higher into the atmosphere once there was enough of it present, which resulted in the formation of clouds. The first precipitation in the form of rainfall emerged from these early clouds.

Therefore, 1.  bombardment of comets and meteorites 2. arrival of icy debris; 3. boiling of water due to Earth's enormous heat; 4. rising of water in the form of water vapor.

To learn more about hydrosphere, refer to the link:

https://brainly.com/question/3294524

#SPJ1

While distributing gifts near the equator, Sneezy will be hanging on a rope with a comparable tension of 413.56 N.

String tension is T = mg at the poles.

where T= tension  (N or kg-m/s2)

9.8 m/s2 is the acceleration caused by gravity (g).

m=Tension ÷ gravity

= 415 ÷9.8 kilogram

= 42.34 kilogram

The value of g has now changed at the equator. Earth's rotation causes g to become g'

g' = g - (w^2)×R

w = angular velocity of earth = 7.29×10^-5

R = radius of earth = 6371000metre

Now, the tension

mg' = mg - mw^2 R

   =  415 − 42.34×6371000×7.29×10^-5×7.29×10^-5

  = T'= 415-(42.34×6371000×7.29(10^(-5)) ×7.29×(10^(-5)))

T' =413.56 N

Gravity: In physics, gravity—also known as gravitation—is the constant force of attraction that pulls all things together.

To know more about radius, visit this:

https://brainly.com/question/24051825

#SPJ1

a) Electric potential difference between origin and that point is - 38.9 V b)  As the potential difference is negative , initial potential energy is greater than final potential energy. Hence, potential at origin will be higher.

External work needed to bring a charge from one location to another location in an electric field is known as electric potential difference.

Given;

Initial speed of electron is 3.7 * 10^6 m/s

Final speed of electron is 1.4 * 10^5 m/s

Final position of electron Xf is 2cm

a) We know that when non conservative force acts on a system then  mechanical energy is conserved;

ΔK + ΔU = 0

Kf- Ki + ΔU = 0

1/2 m Vf² + 1/2 m Vi² + q ΔV = 0  (As U= qV)

1/2m(Vf² - Vi²)= - q ΔV

ΔV = 1 *( 9.1*10^-31)/2*(-1.6*10^-19) [(1.4 * 10^5)²-  (3.7 * 10^6)²]

ΔV = - 38.9 V

b)  As the potential difference is negative , initial potential energy is greater than final potential energy. Hence, potential at origin will be higher.

To know more about electric potential difference, refer

https://brainly.com/question/14306881

#SPJ4

There will be no change in the EEG, and Joseph's sleep will not be interrupted.

Delta waves are the slowest of all brain wave frequencies, and are typically associated with deep and restorative sleep. Since Joseph is already in this state, it is unlikely that the loud noise from the sleep lab will cause a change in his EEG or interrupt his sleep. The loud noise is more likely to cause a disturbance in lighter sleep stages, where the frequency of the brain wave is faster.

EEG  recordings are also not typically affected by external noises, as the electrodes are measuring electrical activity within the brain and not sound waves. Therefore, the loud crash in the sleep lab is unlikely to cause a change in Joseph's EEG and his sleep will most likely remain uninterrupted.

Learn more about EEG:

https://brainly.com/question/1051169

#SPJ4

Some good experiment ideas for quantum physics is magic wavelength magnetometry of ultra-cold atoms.

This is referred to as a procedure which is carried out to support or refute a hypothesis. It is usually performed in the laboratory under controlled conditions and to achieve a purpose.

Quantum physics on the other hand is the study of matter and energy at the most fundamental level and also explains the properties and behaviors of very small objects, such as electrons, photons etc.

Magic wavelength magnetometry of ultra-cold atoms is characterized by the use of perturbations in the ambient magnetic field on particles such as electrons which are caused by contrasts in magnetic susceptibility and it helps in the study of quantum physics.

Read more about Quantum physics here https://brainly.com/question/26095165

#SPJ1

To find the acceleration of the sled, you can use the formula:

F = ma

where F is the applied force, m is the mass of the object, and a is the acceleration.

In this case, you know the applied force and the mass of the sled, so you can solve for the acceleration.

First, you need to find the horizontal component of the applied force. You can do this using the formula:

F_horizontal = F * cos(θ)

where F_horizontal is the horizontal component of the applied force, F is the applied force, and θ is the angle at which the force is applied.

Plugging in the given values, you get:

F_horizontal = 21 N * cos(30°) = 18.5 N

Then, you can use the formula for acceleration to solve for the acceleration of the sled:

a = F_horizontal / m = 18.5 N / 15 kg = 1.23 m/s^2

So the acceleration of the sled is approximately 1.23 m/s^2.

It's important to note that this calculation assumes that there is no friction acting on the sled. If there is friction present, the actual acceleration of the sled may be different.

Change in friction force and acceleration is the most likely changes to cause the car to skid off the track when the coefficient of static friction between the tires and track is 0.90.

Between the two surfaces which are sliding or attempting to slide over one another, there is a force named friction. For instance, friction makes it challenging to push a book down the floor. Friction always moves an object in the direction that is counter to the direction that it is traveling or attempting to move.

To know more about friction visit

brainly.com/question/3415964

#SPJ4

the sum of the energy stored in these two capacitors (cl and c2) is given by the formula ((q2)/2) *((1/c1)+(1/c2))

A capacitor is a device used to store electrical energy that is composed of two conductors that also are spaced apart but close enough to touch. An easy illustration of a storage device is a parallel-plate capacitor.

The primary purpose of capacitors is really to store electrostatic power in an electric field and release it when the circuit needs it. To prevent a potentially dangerous circuit failure, they let the AC through but stop the flow of DC.

To know more about capacitors visit:

https://brainly.com/question/17176550

#SPJ4

Answer:

I only Know to derive so

Explanation:

We have from first equation,

V = u+at

From second equation

S=u+v/2×t

Now by placing the value of v from equation 1 into 2

or s =u+u+at/2×t

or,s= 2u+at/2×t

or,s=2ut/2+at^2/2

Therefore s=ut+1/2at^2

The velocity of the acrobat immediately before grabbing the clown is three times as much mass is in the larger portion and than in the smaller piece, m2 due to air resistance  .

Air resistance is the name for the force that air produces. The force acts in the opposite direction when an object is flying through the air. A truck with a flat forward will experience significant air resistance in comparison to a sports car with a streamlined design.

Air resistance is a function of the object's speed, area, and shape as it moves through the atmosphere. Altitude, temperature, and humidity all have an impact on air resistance and density.

To know about air resistance visit :

brainly.com/question/19165683

#SPJ4

Answer: Both measurements are scalar quantities.

Explanation:

In physics, a scalar quantity is a quantity that is completely specified by its magnitude, without any reference to direction. Speed is an example of a scalar quantity, because it is a measure of how fast an object is moving, without specifying the direction in which it is moving. In this case, both the speedometer reading of 85 mph and the speed of the truck in the next lane at 75 mph are scalar quantities, because they are both measures of speed without specifying a direction.

Because one mole of H X 2 is typically lighter than N e, it stands to reason that it would have a higher entropy than N e. Ne, on the other hand, is thought to have a higher entropy due to its lower molar mass.

A chemical equation can be examined for changes in physical states and the number of moles of product and reactant particles to predict relative changes in entropy using the same factors on a macroscopic level.

The species with the greater molar mass between two monoatomic ones will have a greater standard entropy. The more mobile of two allotropic forms of an element will have a higher standard entropy value. The entropies of these substances are not zero, despite the fact that their conventional internal energies and enthalpies would be. The "energies of formation" of elements in their normal states are typically set to zero because there is no absolute scale of energy.

Entropy, on the other hand, gauges the distribution of energy among the numerous quantum states that can accept it; they exist even in pure substances.

Evidently, entropies often rise with molecule weight. This is, of course, a direct reflection of the fact that translational quantum states are more densely packed in heavier molecules, making them more occupiable, for the noble gases.

The additional impacts of rotational quantum levels are visible in the entropies of the diatomic and polyatomic molecules.

To know more about entropy

https://brainly.com/question/13146879

#SPJ4

The magnitude of the net horizontal force on the puck is 12 N.

The magnitude of the net horizontal force on the puck is the sum of all the forces acting on the puck along the horizontal direction.

The net horizontal force acting on the puck is obtained by applying Newton's second law of motion. Newton's second law of motion states that the force applied on an object is directly proportional to the product of mass and acceleration of the oobject.

Mathematically, Newton's second law of motion is given as;

F = ma

where;

The given horizontal force on the puck include;

eastward force = 12 N

force of friction = 0 N

The net horizontal force on the puck is calculated as;

∑Fx = 0 N + 12 N

∑Fx = 12 N

Learn more about net force here: https://brainly.com/question/14361879

#SPJ1