Answer:Which of the following are characteristics of a RAW image file format? Choose all that apply.
- It is unprocessed until transferred to a computer.
- It results in larger file sizes.
- It is used in digital cameras to allow greater control over image processing/editing.
Explanation:
cuz
It is unprocessed until transferred to a computer, It results in larger file sizes, and It is used in digital cameras to allow greater control over image processing/editing are characteristics of a RAW image file format. Hence, option C, D and E are correct.
What is RAW image?A RAW file records the raw data from your camera's sensor because it is lossless. A RAW file, which is often referred to as a digital negative, can be thought of as the unprocessed "ingredients" of a photograph that must be further enhanced to realize its full potential.
Due to the format's ability to capture the most detail, many seasoned photographers choose to shoot in RAW. With a RAW file, it can frequently be simpler to alter exposure later.
The data from the image sensor of either a digital camera, a motion picture camera, or both is contained in a camera raw image file.
Thus, option C, D and E are correct.
For more information about RAW image, click here:
https://brainly.com/question/30024972
#SPJ2
On the other hand, when measuring a current in the circuit, the meter should have a very low resistance to avoid loading effect. What will happen if the resistance of the ammeter is high?
Hindi ko alam just k n I tjnr I hope to hear fro the of brim with the new baby is a good thing I tjnr I will be at the office
Answer:
Voltmeters measure voltage, and ammeters measure current. A voltmeter is placed in parallel with the voltage source to receive full voltage and must have a large resistance to limit its effect on the circuit. ... Standard voltmeters and ammeters alter the circuit being measured and are thus limited in accuracy.
18. WHICH MENU WOULD MOST LIKELY ALLOW YOU TO ADJUST YOUR LINE SPACING? *
EDIT
FILE
F0RMAT
INSERT
Explanation:
FORMAT
because it is used for the general appearance of the page
Which one do we use to send signals as IR light waves?
Answer:
ir sensor
Explanation:
The characteristics of the emitters and sensors we can find the answer for sending infrared signals is:
IR detector
The transmission of information through the air uses a variety of methods, from audible signals, infrared, microwave. Detectors in the required energy range. The emission and reception of signals requires electromagnetism that emits res in the range of energy required to have, in general the emitter and the detector must have the same spectral response range.
The emission of light signals requires sensors that emit visible light.
Infrared signal emission uses infrared detectors, for example TV remote controls.
The emission of microwave signals must use magnetrons that emit microwave, for example cell phones.
Motion detectors use multiple or pixelated sensors to detect the movement of objects.
Let's analyze the claims for the emission of IR signals.
Ambient light sensors
False. This visible range is more energy than infrared.
RemoteFalse. Remote controls use wavelengths between 800nm to 1200nm.
IR dettectorTrue. IR sensors are suitable for IR signals.
Moviment detectorFalse. Motion sensors are sensors with multiple detectors to measure the movement of objects.
In conclusion, using the characteristics of the emitters and sensors we can find the answer for the sending of infrared signals is:
Infrared sensors in the same energy range.
Learn more here: https://brainly.com/question/12723000
You have answered 12 of 23 questions.
ing
1
Question # 13
A group of computers that share resources are called what?
2
O A server
3
O A personal computer
O A router
1
O A network
Read Question
Answer:
the answer is a network because the others are for different things
ASAP! WILL MARK BRAINLIEST + 100 POINTS!!
Match each word to its description.
Answer:
Windows- operating system most commonly used by businesses
Spreadsheet, word processing- types of application software
data- type of file created when word processing document is saved
system calls- instructions for the OS provided by application software
documents- folder where documents you create go by default
Recycle Bin- where documents go when you delete them.
toggling- switching from one setting to another
Help menu- best place to get assistance in a word-processing program
I hope this helps, please let me know if any are incorrect.
write measure five safety measures can be taken to stay safe in social media
Answer:
*Use a strong password for your accounts
*Set your account to private if given the chance to do so
*Be very selective with friend requests
*Click links with caution
* Don't over share your life
Crazy Sentence Program. Create a program that prompts the user for the name of an animal, a color, the name of a vehicle, and the name of a city. Then print a sentence that contains the user input in the following order. Include the additional words in the sample output as part of your output. Example: Assume the user enters the words: tiger, green, motorcycle, and Wildwood. The output would be: The green tiger drove the motorcycle to Wildwood.
I agree with you ✔✔✔
To what extent do you agree with the assertion that ""Collection development begins with community analysis"". (Give reasons to buttress your answer).
The assertion that collection development starts with community analysis is true.
Collection development refers to the systematic assessment and selection of library resources. The collection development policy is vital for setting goals for the collection that mirror the missions of the library. It gives information to the stakeholders of the library about how the collection will be chosen, and who will make the decisions regarding the collection.
Collection development starts with community analysis. The collection plan should follow a logical process in order to be effective. The community should be taken into consideration before the plan is carried out. The more one knows about the community, the better it'll be to make the collection plan effective.
Read related link on:
https://brainly.com/question/25273125
What is a process of adding details to a model to make it less abstract
Answer:
refinement
Explanation:
https://brainly.com/question/19274876
All of the following can provide source data except a. a scanning device at the grocery store b. a utility bill received in the mail c. a bar code reader d. software to process the source data
Answer: A: a scanning device at the grocery store
Explanation:
italic, bold, bold italic, and underline are examples of _____.
Answer:
Examples of typographical emphasis.
PLS HELP WITH MY PYTHON HW ILL GIVE YOU BRAINLIEST
Answer:
class Cat:
isHungry = None
play = Cat().isHungry = True
eat = Cat().isHungry = False
if play:
print("I am hungry, I cannot play")
else:
play = Cat().isHungry = False
if eat:
print("I am full, I cannot eat")
else:
eat = Cat().isHungry = True
Explanation:
Just simple if and else statements.
Help please! i don’t know how to do this.
H2 should be:
-Blue
-Times New Roman or Arial
-Align to the right
2. Strong should be:
-Teal
-32pt
-Boldness of 700
3. P should be:
-All in uppercase
-Overlined
-Word space of 10em
Answer:
Make sure to create and link a css file with the following:
<link rel="stylesheet" href="./styles.css">
In your css file, enter these styles:
h2 {
color: blue;
font-family: 'Times New Roman', Times, serif;
text-align: right;
}
strong {
color: teal;
font-size: 32pt;
font-weight: 700;
}
p {
text-transform: uppercase;
text-decoration: overline;
word-spacing: 10em;
}
Explanation:
In order for the html file to know where your styles are located, you have to link it to the css file with the code given above. In this file, you will enter some css to change the styles of the elements you have created in your html file.
To alter the style of an element, you first have to enter the name of the element itself, its class or its id. In this case, we have used the element itself, meaning that all the same elements in the html file will have the same style. The styles you wish to use are entered in between the curly brackets.
In your specific problem, we are trying to change the h2, strong and p elements, so that is what we have done. For the h2, you wanted it blue, therefore we use the color property to change the color. For the font, we use the font-family and finally we use text-align to align it to the right. The same pretty much applies for the other two elements. Your strong element needs to be teal,32pt and 700 bold. Therefore we use the color, font-size and font-weight properties respectively. And finally for the p element, we will use the text-transform, text-decoration and word-spacing properties respectively.
When you dont know the name of the property you want to change, I suggest googling it. You will definitely find the property name you are looking for. W3schools.com is a good source to use.
this endpoint does not support blobstorageevents or softdelete. please disable these account features if you would like to use this endpoint.
Answer:
A
Explanation:
Endpoint mover is one of the graph tools that has gives the tendency for manipulation of lines or curves. When this manipulation is done, it add some few values to the ploted points so as to achieve a desired line or curve.
What is content filtering ?Content filtering has been the process of the screening and or restricting access to objectionable email, webpages, executables, and other suspicious items using software or hardware. Filtering software can detect objectionable or criminal content, such as hate sites, illegal content, and social media.
As the part of their internet firewalls, businesses frequently employ content-based filtering, also known as information filtering. Content filtering, a common security measure, assists businesses in enforcing corporate policies regarding the use of information systems, such as the filtering and blocking of employee access to social media platforms.
Therefore, Endpoint mover is one of the graph tools that has gives the tendency for manipulation of lines or curves. When this manipulation is done, it add some few values to the ploted points so as to achieve a desired line or curve.
To learn more about content filtering , visit
https://brainly.com/question/13129235
#SPJ2
"My pet named Steve."
Who said this?
Answer:it seems you have said it
Explanation:
....
which kind of system software tells the computer how to communicate with peripherals, such as a printer or scanner?
Answer:
device drivers
Explanation:
Ray owns a gaming cafe where users can play video games on computers. These games involve rich graphics and need high processing to function. What type of client does ray use for games in the gaming cafe.
Ray uses a(n) _____ client for the video games.
Answer:
thick
Explanation:
i took the test and got it right
Why is it important to create a web maintenance schedule? Check all of the boxes that apply.
A, B, D
I just did it mate :)
Susan is excited to learn various safe ways to browse the Internet. She is looking for suggestions that would help her. Which are the valid suggestions for Susan? The Internet is a medium used by numerous individuals. As a user of it, the responsibility of privacy and security rests with the user. Susan should be aware of the potential risks associated with improper use of the Internet. She should hence share her Social Security number whenever asked for it. She should be careful when using third-party applications and download applications from trusted and secure sites only. Susan should also be careful while using social networking websites. Susan should update her location information whenever possible. She should not click on any unknown links and use secure browsing and strong passwords. An example of a strong password is susanishere.
Answer:
a
Explanation:
how to prevent truncation of data when importing into sas studio
Answer:
Set the length BEFORE pulling the dataset. You cannot change the length of character variable after it has already been set. Then remove any format that might be attached to it. In fact why not just remove any formats attached to any of your character variables.
how do ""night modes"" on computer screens help people fall asleep?
Answer:
it doesn't really help people fall asleep but
Explanation:
When it gets dark, your pineal gland secretes the hormone melatonin, which tells your body to get tired and go to sleep.
Answer:
Answer it doesn't really help people fall asleep but some people it can
Explanation:
Most people dont fall asleep while on computers but the people who do it helps because the screen is not all bright and doesn't keep your eyes wide open
Which type of basic building blocks (constructs) is the following algorithm?
Answer:
Sequence
Explanation:
What device on a network enables work to be performed for a business?
server
router
endpoint
modem
Answer:
Option B or Router must be correct.
Kind request:
Please give me brainliest if my answer was useful :D
Using robots to replace workers in factories is an example of which of the following forms of information processing systems? a. Commercial b. Control c. Scientific d. Industrial
Answer:
Industrial Robots
Explanation:
They are considered industrial robots because the word industrial has to do with an industry or a factory.
Also, industrial robots will replace the human workers
Hope this Helps
To free up human power for more difficult jobs, they are easily used to finish boring, repetitive, and physically taxing chores. This means that many low-skilled positions, like those in warehouses and on assembly lines, will be replaced by robots, endangering the employment of many low-skilled humans. Thus, option D is correct.
What using robots to replace workers in factories?Labour automation is the process of using technology instead of people to carry out particular tasks or jobs. Mechanization is a component of automation, but it also entails expanding it by using technology to further dehumanize work.
An automated conveyor would transport the product being manufactured from one stationary worker to the next until it was fully assembled, replacing the previous approach in which employees transported their pieces to a stationary assembly site.
Therefore, using robots to replace workers in factories is an example of Industrial forms of information processing systems.
Learn more about robots here:
https://brainly.com/question/15561225
#SPJ2
what is the term used to describe image file that contains multiple small graphics?
Which term describes a protocol to manage a network, able to configure a network, monitor activity, and control devices?
A: Internet Message Access Protocol (IMAP)
B: Simple Network Management Protocol (SNMP)
C: Post Office Protocol version 3 (POP 3)
D: Simple Mail Transfer Protocol (SMTP)
Answer:
Simple Network Management Protocol (SNMP)
(Confirmed on EDGE)
I hope this helped!
Good luck <3
please answer it is important!!!! i will mark you branliest
Answer:
Machine - consists of the numeric codes for the operations that a particular computer can execute directly
Assembly - provides the information of any error in the code.
High level - Require translation.
Require translation.Portable.
Require translation.Portable.Easier to read, write and maintain as commands are similar to English.
Require translation.Portable.Easier to read, write and maintain as commands are similar to English.Allow access to module libraries.
Working with text in presentation programs is very ____
using text in other applications.
a) similar to
b)different from
Answer:
a) similar to
Explanation:
Answer: it is A
Explanation: Your inquiry states that "Working with text in presentation programs is very ____ using text in other applications." Working in presentation software such as Microsoft PowerPoint and Microsoft Word, is very different. Microsoft PowerPoint allows you to do so much more on the visuals, Microsoft PowerPoint and other presentation software also has capabilities to present information than displaying it in a text-editor.
pls make me branliest
Need help Plz i have only 20 min
Answer:
1. tripod
2.srry i don't know
3. true
4. sorry i don't know
5. prob true
Answer:
Tripod
2. The pixel
3. True
4. Goo_____gle Slides
5. True
Ulrich has to present his findings on the music of modern Japan at school the next day. What is the BEST way for him to do this? A. A direct speech to the class B. A multimedia presentation with sound C. A written essay with image handouts D. An interactive workshop involving the class
Answer:
b. a multimedia presentation
Explanation
it says its right on edmentum