Coastal cities like San Diego often have a smaller air temperature range than inland cities because of the moderating effect of water bodies. Water has a higher specific heat capacity than land, which means it can absorb and store a lot of heat energy before its temperature changes significantly. As a result, coastal areas experience milder temperatures than inland areas, where temperatures can fluctuate more dramatically.
During the day, when the sun is shining, land surfaces heat up quickly and become much hotter than nearby water bodies. This causes the air above the land to rise and cooler air from over the water to flow in and replace it. This flow of cooler air from the water is known as a sea breeze. The sea breeze helps to cool down the land and keep temperatures relatively stable, preventing the temperature from rising too high.
At night, the opposite happens, and land surfaces lose heat more quickly than water bodies. This causes the air over the land to cool rapidly and sink, while warmer air from over the water rises to replace it. This flow of warmer air from the water is known as a land breeze. The land breeze helps to warm up the land and prevent temperatures from dropping too low.
In summary, coastal cities like San Diego often have a smaller air temperature range than inland cities because of the moderating effect of water bodies. Water absorbs and stores heat energy, which helps to stabilize temperatures and prevent large temperature fluctuations.
To know more about Coastal cities click this link-
brainly.com/question/13850060
#SPJ11
is/are NOT an example of alternative hydrocarbon sources.
a. Methane hydrate
c. Oil shales
b. Peat bogs
d. Tar sands
Peat bogs is/are NOT an example of alternative hydrocarbon sources. The correct option is D.
Peat bogs are not an example of alternative hydrocarbon sources. While methane hydrates, oil shales, and tar sands are all sources of hydrocarbons that can be extracted and processed for energy production, peat bogs are not considered hydrocarbon sources in the same sense.
Peat bogs are a type of wetland where dead plant material accumulates and forms peat, which is a precursor to coal. Although peat can be used as a fuel source, it is not categorized as a hydrocarbon like the other options mentioned.
To recap, out of the options provided, peat bogs are NOT an example of alternative hydrocarbon sources, while methane hydrates, oil shales, and tar sands are considered alternative sources of hydrocarbons.
To know more about Peat, refer here:
https://brainly.com/question/19322338#
#SPJ11
Complete question:
________is/are NOT an example of alternative hydrocarbon sources.
a. Methane hydrate
c. Oil shales
b. Peat bogs
d. Tar sands
Lack of planning by local municipalities in the provision of basic services e.g. housing/education/electricity
For people to live better lives, basic amenities like power and energy, water and sanitation, garbage and waste management are essential.
What do the regional and national governments do?Both provincial governments and local governments manage substantial public road networks and contribute to or provide services linked to public transit. They also actively administer elements of planning and regulatory frameworks that govern land use, have an impact on the development of infrastructure, and foster economic activity.
What objectives do municipalities have for local governance?A municipality is supposed to: (a) arrange and manage its administrative, financial, and planning procedures to prioritize the community's basic needs and to promote the community's social and economic progress; and (b) participate in federal and provincial development programs.
Learn more about local governments: https://brainly.com/question/31333519
#SPJ1
Sediment grain size:
a) What is the relationship between (1) the size of sediment grains carried by ocean water and (2) the energy of the water? (NOTE: this question is not about well-sorted versus poorly sorted sediments. It's about grain size.)
b) Suggest what oceanographers can learn from mapping the grain sizes of sediment that has settled onto the seafloor.
a) The size of sediment grains carried by ocean water is directly related to the energy of the water. When the water is moving at a high velocity, it can carry larger sediment grains because it has more energy to overcome the frictional forces that keep the grains in place. Conversely, slower-moving water can only carry smaller sediment grains because it doesn't have enough energy to move larger ones.
b) Mapping the grain sizes of sediment that has settled onto the seafloor can provide valuable information about the history and dynamics of ocean currents. For example, if the sediment is composed mostly of fine-grained particles, it suggests that the water was moving slowly when it was deposited. On the other hand, if the sediment contains a mixture of fine and coarse-grained particles, it suggests that the water was moving at varying velocities.
By studying the distribution of sediment grain sizes, oceanographers can learn about the intensity and direction of ocean currents in the past and present, and use this information to make predictions about future oceanographic events.
To know more about sediment grains refer here:
https://brainly.com/question/29220733#
#SPJ11
Why is Globalization Controversial?
why would one conclude that high stream order in a valley network would be more characteristic of rainfall runoff than groundwater sapping?
High stream order in a valley network is more characteristic of rainfall runoff than groundwater sapping: because rainfall runoff generates larger volumes of water
First, rainfall runoff is the process by which excess water from rain, snowmelt, or other sources flows over the land surface. This results in a higher stream order, as larger volumes of water contribute to the formation and growth of river systems.
This increased water volume and flow velocity lead to the erosion of valley networks, causing the development of branching patterns.
On the other hand, groundwater sapping is a process in which groundwater slowly erodes the landscape, forming valleys and channels. Groundwater sapping typically results in lower stream orders, as the process is slower and does not generate as much flow as rainfall runoff.
Additionally, rainfall runoff usually occurs more rapidly, leading to a higher likelihood of flash floods and the creation of a more extensive network of interconnected streams. Groundwater sapping, being a slower process, tends to form less extensive networks with lower stream orders.
In summary, high stream order in a valley network is more characteristic of rainfall runoff than groundwater sapping because rainfall runoff generates larger volumes of water, occurs more rapidly, and leads to the development of more extensive and interconnected networks of streams.
To know more about groundwater, refer here:
https://brainly.com/question/28288306#
#SPJ11
discussion on different types of drought
Explanation:
Drought is a natural disaster that occurs when there is insufficient rainfall for an extended period of time, leading to a shortage of water resources. Different types of drought can occur depending on the region, climatic conditions, and severity of the drought. In this discussion, we will explore some of the different types of droughts.
1. Meteorological drought: This type of drought occurs due to a prolonged period of below-average precipitation, leading to a deficit in soil moisture and reduced water availability. Meteorological droughts are often caused by changes in weather patterns such as El Niño or La Niña.
2. Agricultural drought: This type of drought affects agricultural crops and livestock, and occurs when there is a deficiency of soil moisture or inadequate rainfall during the growing season. It can lead to crop failure, loss of livestock, and reduced yields. Agricultural droughts can have significant economic impacts on farming communities and food prices.
3. Hydrological drought: This type of drought is caused by a deficit of water in rivers, lakes, and groundwater sources. Hydrological droughts can result from a combination of reduced precipitation and increased water usage. They can have far-reaching impacts on ecosystems, habitats, and human societies that depend on these water sources.
4. Socioeconomic drought: This type of drought encompasses the social and economic impacts of drought, which can include increased unemployment, loss of income, and food insecurity. Socioeconomic droughts have a disproportionate impact on vulnerable populations, particularly those living in poverty, and can exacerbate existing inequalities.
5. Ecological drought: This type of drought affects ecosystems, biodiversity, and natural resources, leading to damage to plant and animal species and their habitats. Ecological droughts can be caused by a lack of water, changes in temperature, and other factors.
In conclusion, understanding the different types of drought is important for predicting and managing their impacts. Effective drought management strategies may include water conservation, drought-resistant crop varieties, and early warning systems.
During times when precipitation exceeds potential evapotranspiration, 300 DEF -DST +DST SURP 200 mm 100 0 J F M A M J J A S O N DJ MONTH Multiple Choice water may go into deep percolation as groundwater. All of these are correct. extra water goes into soil-water recharge if the soil is below field capacity. there cannot be a deficit
During times when precipitation exceeds potential evapotranspiration, there can be various pathways for the excess water like water may go into deep percolation as groundwater, extra water goes into soil-water recharge, and there cannot be a deficit.
One pathway is deep percolation into the groundwater system. This means that the water infiltrates through the soil and accumulates in the saturated zone below the surface. Groundwater can then be used for various purposes such as drinking water, irrigation, and industrial processes.
Another pathway for excess water is soil-water recharge. This occurs when the soil is not at field capacity and can still absorb more water. The water infiltrates through the soil and replenishes the soil moisture, which can benefit vegetation and crops. However, if the soil is already at field capacity, the excess water can result in surface runoff and erosion.
It is important to note that during times when precipitation exceeds potential evapotranspiration, there cannot be a deficit. This means that all the water that enters the system will be used in some way, whether it is through groundwater recharge or soil-water replenishment. Understanding these pathways can help in managing water resources and ensuring that they are used in a sustainable manner.
Know more about groundwater here:
https://brainly.com/question/14241380
#SPJ11
a) progression of grain sizes away from shore; shallow marine fossils, ripples; sandstone, mudstone, limestone; broad, shallow area commonly referred to as passive margin
Sandstone, mudstone, fossiliferous/oolitic limestone, sand ridges, and tempestites are all possible features of the continental shelf, which is a progression in grain size away from the coast. commonly known as the passive margin, a large, shallow region.
What precisely is the continental shelf?Geologists typically refer to the area of the continental margin that is located between the shoreline and the shelf break or, in the absence of a discernible slope, between the shoreline and the location where the depth of the water immediately adjacent to the shore is approximately between 100 and 200 meters.
What is the continental shelf, and why is it important?A continent's oceanic edge is referred to as its continental shelf. The seven primary geographic divisions on Earth are known as continents. A continental shelf extends from the shoreline of a continent to a point where it drops off, which is referred to as the shelf break.
Learn more about continental shelf: https://brainly.com/question/383674
#SPJ1
Sandstone, mudstone, fossiliferous/oolitic limestone, sand ridges, and tempestites are all possible features of the continental shelf, which is a progression in grain size away from the coast. commonly known as the passive margin, a large, shallow region.
What precisely is the continental shelf?Geologists typically refer to the area of the continental margin that is located between the shoreline and the shelf break or, in the absence of a discernible slope, between the shoreline and the location where the depth of the water immediately adjacent to the shore is approximately between 100 and 200 meters.
What is the continental shelf, and why is it important?A continent's oceanic edge is referred to as its continental shelf. The seven primary geographic divisions on Earth are known as continents. A continental shelf extends from the shoreline of a continent to a point where it drops off, which is referred to as the shelf break.
Learn more about continental shelf: https://brainly.com/question/383674
#SPJ1
which of these numbered features contains most of earth’s freshwater? lakes groundwater glaciers and ice sheets atmosphere ocean
The feature that contains most of Earth's freshwater is glaciers and ice sheets.
Glaciers and ice sheets hold about 68.7% of Earth's freshwater, while groundwater accounts for about 30.1%. Lakes, rivers, and swamps hold only about 0.3% of Earth's freshwater. The atmosphere holds only a small amount of freshwater, mostly in the form of water vapor. The ocean holds the largest volume of water on Earth, but it is saline, with only about 2.5% of it being freshwater.
The importance of glaciers and ice sheets as freshwater reservoirs cannot be overstated. They act as "frozen reservoirs" that store freshwater as snow and ice, releasing it slowly over time, which helps regulate the flow of freshwater to streams and rivers. The melting of glaciers and ice sheets due to climate change can have profound impacts on freshwater availability and can cause changes in water availability and quality, affecting human populations, ecosystems, and economies.
Learn more about atmosphere here:
https://brainly.com/question/26767532
#SPJ11
Which form of geologic dating is best used to identify when each rock type formed? Rock Types (3 items) (Drag and drop into the appropriate area below) A. Igneous B. metamorphic C. sedimentary Method of Dating Numerical Dating ____Relative Dating ____
Numerical Dating is best used to identify when each rock type formed. Numerical Dating is the process of assigning an age to a rock in terms of numbers, usually in millions of years before present.
What is Numerical Dating?Numerical dating is a technique used to assign specific dates to geological events. It involves the evaluation of numerical data, such as radiometric age determinations, stratigraphic correlations, and other numerical evidence. Radiometric age determinations provide numerical data that allow geologists to assign absolute ages to specific geologic events.
This method of dating is most commonly used to determine the age of igneous rocks.
Relative Dating is best used to determine the sequence of events in the formation of rocks. Relative Dating does not assign an age to a rock, but instead it looks at the sequence of events and the relationships between different rock types. It is most commonly used to date sedimentary and metamorphic rocks.
To learn more about Numerical Dating
https://brainly.com/question/1616122
#SPJ1
What have been some of the debates around the use of innovations
Answer:
What is the debate on innovation versus invention?People often use the words “invention” and “innovation” interchangeably. This is not only incorrect but misses a few key subtleties in meaning that can change a conversation. Invention is about creating something new, while innovation introduces the concept of the “use” of an idea or method.
the layers and blocks rotate, but the faults do not rotate
During tectonic activity, rock layers and blocks may rotate due to the deformation of the Earth's crust. This can occur through various mechanisms such as folding, faulting, or shearing. In some cases, entire blocks of rock can rotate along a horizontal or vertical axis, causing changes in the orientation of the rock layers.
However, faults are a specific type of geological structure where there is movement along a fracture in the rock, either horizontally or vertically. Faults themselves do not rotate, but the blocks of rock on either side of the fault may move relative to each other, resulting in changes in the of the rock layers on either side of the fault.
It's important to note that there are some cases where faults may appear to rotate due to changes in the orientatorientation ion of the surrounding rock layers. This can occur when the fault is located at an angle to the direction of the deformation, causing the rock layers on either side of the fault to rotate slightly as they are squeezed or stretched. However, the fault itself remains fixed in place.
Learn more about geological here
https://brainly.com/question/5634603
#SPJ11
advection is the process by which heat is transferred through wind and ocean currents from the equator to the higher latitudes and polar regions, true or false?
True. Advection is the transfer of heat or other properties through the movement of a fluid, such as air or water. In the case of heat transfer from the equator to higher latitudes and polar regions, this is often accomplished through the advection of warm air and ocean currents towards these regions.
Advection is the transfer of heat, mass, or other properties through the motion of a fluid, such as air or water. It is different from conduction and radiation, which involve heat transfer through stationary materials or empty space, respectively.
Advection can occur in the atmosphere, oceans, or other fluids, and is often driven by differences in temperature or pressure between different regions. For example, warm air can advect towards colder regions, leading to an increase in temperature in those areas. Similarly, ocean currents can advect warm or cold water from one region to another, affecting the climate and weather patterns of those regions.
To know more about Advection here
https://brainly.com/question/18803983
#SPJ4
Help!!!!
What factors make the climates different at these two locations, Missoula and Cape Elizabeth
The factors that make the climates different at Missoula and Cape Elizabeth are: D. latitude and proximity to large bodies of water.
What are the Factors Responsible for the Different Climates in the Locations?Missoula is located inland at a higher altitude, which results in a continental climate with cold winters and warm summers.
Cape Elizabeth, on the other hand, is located on the coast and is influenced by the nearby ocean, resulting in a maritime climate with milder temperatures throughout the year. While altitude can also impact climate, it is not the primary factor that distinguishes the climates of these two locations.
Therefore, we can state that the factors that make the climates different at Missoula and Cape Elizabeth are: D. latitude and proximity to large bodies of water.
Learn more about climate on:
https://brainly.com/question/29321529
#SPJ1
The factors that make the climates different at Missoula and Cape Elizabeth are: D. latitude and proximity to large bodies of water.
What are the Factors Responsible for the Different Climates in the Locations?Missoula is located inland at a higher altitude, which results in a continental climate with cold winters and warm summers.
Cape Elizabeth, on the other hand, is located on the coast and is influenced by the nearby ocean, resulting in a maritime climate with milder temperatures throughout the year. While altitude can also impact climate, it is not the primary factor that distinguishes the climates of these two locations.
Therefore, we can state that the factors that make the climates different at Missoula and Cape Elizabeth are: D. latitude and proximity to large bodies of water.
Learn more about climate on:
https://brainly.com/question/29321529
#SPJ1
the following question refers to the grand canyon geologic map. how much time elapsed (at a minimum) between the deposition of the paleozoic sedimentary rocks and the quaternary volcanics?
Based on the Grand Canyon geologic map, the minimum amount of time that elapsed between the deposition of the Paleozoic sedimentary rocks and the Quaternary volcanics is approximately 600 million years. The Paleozoic sedimentary rocks were deposited during the Paleozoic Era, which spanned from 541 million to 252 million years ago.
On the other hand, the Quaternary volcanics were formed during the Quaternary Period, which began 2.6 million years ago and continues until the present day. This means that there were several geological periods and eras, including the Mesozoic and Cenozoic eras, that occurred between the Paleozoic and Quaternary periods.
Throughout this long timespan, various geological processes such as erosion, uplift, and tectonic activity shaped the landscape of the Grand Canyon. The result of these processes is the stunning geological record that is visible in the layers of rock that make up the canyon walls. The different colors and textures of the rocks represent different periods in Earth's history, and provide valuable insights into the planet's evolution over time.
to know more about grand canyon geologic map click this link -
brainly.com/question/7513662
#SPJ11
The reasons for including cultural and linguistic competence in disaster preparedness and crisis response efforts include all the following, EXCEPT:
A. The growing diversity in the U.S.
B. Mitigating health disparities
C. Improving the quality of services and outcomes that are provided to individuals
D. Assimilating everyone to a single cultural framework
The right answer is option D. Assimilating everyone to a single cultural framework is NOT a reason for including cultural and linguistic competence in disaster preparedness and crisis response efforts.
The other options, A, B, and C, are all valid reasons for incorporating cultural and linguistic competence, as it helps to better serve diverse populations, reduce health disparities, and improve the overall quality of services and outcomes provided.
Linguistic competence, as used in linguistics, refers to the unconscious knowledge one possesses when speaking a language. It differs from linguistic proficiency, which refers to any other elements that enable one to use their language in practise. All facets of the organization's activities involve language. In order to facilitate communication across the organisational chart, interact with foreign partners, and ensure the use of proper language in business communication, linguistic proficiency is necessary.
To learn more about Linguistic Competence, click here:
https://brainly.com/question/28502594
#SPJ11
How did the Isrealites view their leaders?
Answer:
Explanation: of a super hi standerd
Human activities that have contributed to shoreline erosion include:
a. seasonal traffic at beaches during the summer months
b. depositional processes
c. placement of seawalls along the shoreline
d. excess fishing and boating activities
Answer:
I think the answer is c. placement of seawalls along the shoreline
Explanation:
Human activities that have contributed to shoreline erosion include: seasonal traffic at beaches during the summer months; depositional processes; the placement of seawalls along the shoreline; and excessive fishing and boating activities.
a. Seasonal traffic at beaches during the summer months can result in the removal of sand and vegetation, which can contribute to shoreline erosion. b. Depositional processes such as sand mining and dredging can lead to a lack of sediment supply to the beach, resulting in shoreline erosion. c. The placement of seawalls along the shoreline can contribute to shoreline erosion by disrupting natural sediment transport processes and altering wave energy. d. Excess fishing and boating activities can lead to the destruction of shoreline vegetation, which can result in increased erosion. Additionally, the disturbance of sediment by boats and anchors can contribute to shoreline erosion.
It's important to note that option b, depositional processes, is not a human activity and is actually a natural process that can help counteract erosion by adding sediment to the shoreline.
To know more about shoreline erosion visit:
https://brainly.com/question/31238235
#SPJ11
The density of the materials that make up the Earth:
Varies randomly for surface to core
Is essentially the same from surface to core
Increases with depth
Decreases with depth
the density of the materials that make up the Earth increases with depth, rather than varying randomly or being essentially the same from surface to core.
The density of the materials that make up the Earth increases with depth.
The Earth is composed of several layers, including the crust, mantle, outer core, and inner core, each with its own distinct physical and chemical properties. These layers have different densities due to differences in the composition and pressure.
The crust which makes up the outermost layer of the Earth, has a relatively low density compared to the layers below it. The mantle, which is located beneath the crust, has a higher density than the crust due to the presence of heavier minerals like iron and magnesium.
As we move deeper into the Earth, the pressure and temperature increase, causing the density to increase as well. The outer core, which is made up of liquid iron and nickel, has a higher density than the mantle. The inner core, which is a solid ball of iron and nickel, has the highest density of any layer in the Earth.
Learn more about density here:
https://brainly.com/question/29775886
#SPJ11
25) trilobites were found in a slab. what is the age of the slab? what other fossils might you find from this era? what was the paleoenvironmental setting?
The presence of trilobites in a slab can provide information about the age and paleoenvironmental setting of the rock, which could be anywhere between the Early Cambrian and the end of the Permian period.
How to determine the presence of trilobites in a slab tell us about its age and paleoenvironmental setting?
If trilobites were found in a slab, the age of the slab would depend on the specific species of trilobite present.
Trilobites lived from the Early Cambrian period, which began around 541 million years ago, until the end of the Permian period, which ended around 252 million years ago. So, the age of the slab could be anywhere within that time range.
Other fossils that might be found from this era include brachiopods, crinoids, and ammonites. These were all common marine organisms that lived during the same time as the trilobites.
The paleoenvironmental setting of the slab would likely be a marine environment, as trilobites were primarily marine organisms.
However, the specific conditions would depend on the age and location of the slab. For example, during the early Cambrian period, the paleoenvironmental setting would have been vastly different than during the Permian period.
Learn more about trilobites
brainly.com/question/27329190
#SPJ11
What are the economic impact on tropical cyclones
i need the answers quick cuz im busy all online
Religion: Hinduism
Founder: No single founder
Date Founded: No specific date of founding
Faith Book: Vedas, Upanishads, Bhagavad Gita, and other texts
What is the religion about?In continuation:
Place of Worship: Temples, shrines, and other sacred placesBasic Beliefs: Belief in the concept of karma, reincarnation, and multiple gods and goddesses. Emphasis on the pursuit of dharma (righteousness), artha (material wealth), kama (pleasure), and moksha (liberation from the cycle of birth and death).Holy Days: Diwali, Holi, Navaratri, and others depending on regional and local traditionsNumber of Followers: Approximately 1.2 billionFollowers Referred to As: HindusProselytizing (Yes/No): Not in the traditional sense, but some Hindu organizations do engage in outreach and conversion efforts.Religion: Buddhism
Founder: Siddhartha Gautama (Buddha)Date Founded: 5th century BCEFaith Book: Tripitaka (Pali Canon) and other textsPlace of Worship: Temples, monasteries, and other sacred placesBasic Beliefs: The Four Noble Truths and the Eightfold Path. Emphasis on the concepts of impermanence, non-self, and the cessation of suffering through the attainment of enlightenment (nirvana).Holy Days: Vesak, Asalha Puja, and other festivals depending on regional and local traditionsNumber of Followers: Approximately 500 millionFollowers Referred to As: BuddhistsProselytizing (Yes/No): Some Buddhist organizations engage in outreach and conversion efforts, but there is no centralized authority or commandment to do so.Religion: Taoism
Founder: Laozi (possibly legendary)Date Founded: 4th century BCE (Dao De Jing written)Faith Book: Dao De Jing and other textsPlace of Worship: Temples, shrines, and other sacred placesBasic Beliefs: The concept of the Tao (the way), Yin and Yang, and the pursuit of harmony with nature and the universe. Emphasis on simplicity, humility, and detachment from worldly desires.Holy Days: Qingming Festival, Taoist festivals vary depending on regional and local traditionsNumber of Followers: Estimates range from 20-30 millionFollowers Referred to As: TaoistsProselytizing (Yes/No): Generally, Taoism does not seek to convert others and emphasizes personal spiritual development rather than institutional growth.Read more about religion here:
https://brainly.com/question/11541955
#SPJ1
Religion
Hinduism
Buddhism
Taoism
Founder
Date Founded
Faith Book
Place of Worship
Basic Beliefs
Holy Days
# of Followers
Followers Referred to As
Proselytizing (Yes/No)
Religion: Hinduism
Founder: No single founder
Date Founded: No specific date of founding
Faith Book: Vedas, Upanishads, Bhagavad Gita, and other texts
What is the religion about?
In continuation:
Place of Worship: Temples, shrines, and other sacred places
Basic Beliefs: Belief in the concept of karma, reincarnation, and multiple gods and goddesses. Emphasis on the pursuit of dharma (righteousness), artha (material wealth), kama (pleasure), and moksha (liberation from the cycle of birth and death).
Holy Days: Diwali, Holi, Navaratri, and others depending on regional and local traditions
Number of Followers: Approximately 1.2 billion
Followers Referred to As: Hindus
Proselytizing (Yes/No): Not in the traditional sense, but some Hindu organizations do engage in outreach and conversion efforts.
Religion: Buddhism
Founder: Siddhartha Gautama (Buddha)
Date Founded: 5th century BCE
Faith Book: Tripitaka (Pali Canon) and other texts
Place of Worship: Temples, monasteries, and other sacred places
Basic Beliefs: The Four Noble Truths and the Eightfold Path. Emphasis on the concepts of impermanence, non-self, and the cessation of suffering through the attainment of enlightenment (nirvana).
Holy Days: Vesak, Asalha Puja, and other festivals depending on regional and local traditions
Number of Followers: Approximately 500 million
Followers Referred to As: Buddhists
Proselytizing (Yes/No): Some Buddhist organizations engage in outreach and conversion efforts, but there is no centralized authority or commandment to do so.
Religion: Taoism
Founder: Laozi (possibly legendary)
Date Founded: 4th century BCE (Dao De Jing written)
Faith Book: Dao De Jing and other texts
Place of Worship: Temples, shrines, and other sacred places
Basic Beliefs: The concept of the Tao (the way), Yin and Yang, and the pursuit of harmony with nature and the universe. Emphasis on simplicity, humility, and detachment from worldly desires.
Holy Days: Qingming Festival, Taoist festivals vary depending on regional and local traditions
Number of Followers: Estimates range from 20-30 million
Followers Referred to As: Taoists
Proselytizing (Yes/No): Generally, Taoism does not seek to convert others and emphasizes personal spiritual development rather than institutional growth.
a simultaneous tropical cyclone landfall with high tide can be more devastating in the east coast (us north atlantic) relative to the gulf of mexico because
A simultaneous tropical cyclone landfall with high tide can be more devastating in the east coast (US North Atlantic) relative to the Gulf of Mexico because the east coast has a higher population density, more developed infrastructure, and a higher likelihood of encountering storm surge due to its geography and bathymetry.
When a tropical cyclone makes landfall, the storm surge is often one of the most destructive and deadly aspects of the storm. Storm surge occurs when the winds of the tropical cyclone push water onshore, causing flooding and damage to coastal communities. The height of the storm surge can vary depending on the tide level at the time of landfall.
In the case of a simultaneous tropical cyclone landfall with high tide, the storm surge can be particularly devastating. The high tide means that the water level is already elevated, and the storm surge adds even more water on top of that. This can lead to widespread flooding and damage to infrastructure, homes, and businesses in coastal communities.
The east coast (US North Atlantic) is more vulnerable to the effects of a simultaneous tropical cyclone landfall with high tide for several reasons. First, the east coast has a higher population density than the Gulf of Mexico, which means that more people are at risk of being affected by the storm. Second, the east coast has more developed infrastructure, such as roads, bridges, and buildings, which are more vulnerable to damage from storm surge.
Finally, the geography and bathymetry of the east coast make it more likely to encounter storm surges. The coastline is generally more steeply sloping, which means that the storm surge can penetrate further inland. In addition, the continental shelf is narrower on the east coast, which means that the water depth increases more rapidly as you move offshore. This can lead to higher storm surge heights along the coast.
Overall, a simultaneous tropical cyclone landfall with high tide can be more devastating in the east coast (US North Atlantic) relative to the Gulf of Mexico due to the higher population density, more developed infrastructure, and increased likelihood of encountering storm surge.
Learn more about population density: https://brainly.com/question/16894337
#SPJ11
When energy is released during an earthquake, stress in the rocks along the fault is decreased.
a) True
b) False
Answer:
Trueeeeee
Explanation:
Are you looking for a personal tutor??
Question 14 4 If it is 95°F today, how much water vapor would be needed to saturate the air in g/kg O 10 g/kg O 14 g/kg O 20 g/kg 26.5 g/kg O 35 g/kg
Answer:
Explanation:For the atmosphere, the drop in temperature of rising, unsaturated air is about 10 degrees C/1000 meters (5.5 deg F per 1000 feet) altitude. If a parcel of air is at 24 degrees C at sea level, and it rises to 1000 meters, its temperature will go down to 14 degrees C. If it goes up to 2000 meters, its temperature will go down to 4 degrees C.
4. What will its temperature be at 3000 meters?
The temperature would be minus 6 degrees C.
This rate of temperature change of unsaturated air with changing altitude is called the dry adiabatic lapse rate: the rate of change of the temperature of rising or subsiding air when no condensation is taking place (we’ll talk about the condensation part shortly).
If the air subsides, it also changes temperature. It warms up, and it is warming up at the dry adiabatic lapse rate. So, if the air at 4000 meters altitude has a temperature of -10 degrees C, and it subsides to 3000 meters, its temperature will warm up to 0 degrees C. If it continues to subside, then at 2000 meters, its temperature will be 10 degrees C.
5. What will the temperature of this air be at 1000 meters?
Its temperature would be 20 degrees C.
Make sure you notice that we are talking about moving air (rising or subsiding), not still air. The change in temperature of still air (that is, air that is not rising or subsiding) follows the environmental lapse rate, which varies considerably, but averages about 6.5 deg C/1000 meters (3.6 deg/1000 feet). In still air, if you went up in a hot air balloon, carrying a thermometer and taking the air temperature every 1000 meters, on average the temperature would drop 6.5 degrees C every 1000 meters. The rate of temperature change as you rise in still air is not as great as the rate of change of rising air; that is, the air parcel does not cool off as fast.
For instance, the air temperature at sea level is 28 degrees C. Climb into your balloon, release the tethers, and go up 1000 meters in the still air.
6. On average, what will the air temperature be at 1000 meters?
The temperature will be 21.5 degrees C.
Well, what happens is that the air will still cool off, but not as fast. If water vapor in the air is condensing, the adiabatic rate is lower. The air is only cooling off at a rate of about 5 degrees C/1000 meters (2.7 deg per 1000 feet). This is called the saturated adiabatic lapse rate (or the wet adiabatic lapse rate, or the moist adiabatic lapse rate, depending on the textbook you are using). The saturated lapse rate varies with the original temperature of the air parcel, but 5 degrees C/1000 meters is a commonly used value.
So, let’s assume a rising parcel of air reaches the lifting condensation level at 2000 meters, at a dew point temperature of 12 degrees C. At this point, clouds will form. As the air continues to rise, it will continue to decrease in temperature, but more slowly than it cooled off before condensation began.
11. What will the temperature of this parcel of air be at 3000 meters?
The temperature at 3000 meters will be approximately 7 degrees C. The saturated adiabatic lapse rate is given as 5 deg C/1000 meters, so if you go up 1000 meters, the air will cool off 5 degrees. 12-5=7.
16. What relationship best allows you to determine the age relationships between folding and faulting in this region? a. law of superposition d. cross-cutting relationship b. law of original continuity e. principle of inclusion c. law of original horizontality
The cross-cutting relationship best allows you to determine the age relationships between folding and faulting in a given region.
The cross-cutting relationship is a principle of relative dating that states that any feature that cuts across another feature must be younger than the feature it cuts across. In the context of structural geology, this means that any fault or fold that cuts across a rock layer must be younger than the rock layer itself. By examining the relationships between folds, faults, and rock layers in a given region, geologists can determine the relative timing of events and construct a timeline of geological activity.
The other options listed, such as the law of superposition, the law of original continuity, the principle of inclusion, and the law of original horizontality, are also principles of relative dating used by geologists to determine the relative ages of rock layers and geological events. However, these principles are less applicable to determining the age relationships between folding and faulting specifically.
Learn more about geologists here:
https://brainly.com/question/13428729
#SPJ11
Does the rock cycle always follow a certain path? In other words,is it a one way process? Please explain why or why not.
No, the rock cycle is not a one way life cycle as of a butterfly. It demonstrates the relationships between the three main types of rocks and the long-term processes that transform them from one type to another.
2. Please explain why or why not.- The rock cycle does not necessarily proceed in a straight line (for instance, magma igneous sedimentary metamorphic magma).
The full rock cycle takes into consideration a variety of physical processes that influence the development of distinct types of rock.
1. Weathering and Erosion-
In addition to affecting igneous rock, weathering and erosion may also decompose metamorphic rocks into sediments. New sedimentary rock may then be created from these deposits. Sedimentary rock itself can decompose into sediments that can be utilised to create new and distinct sedimentary rock.2. Heat and Pressure-
The same heat and pressure that metamorphize igneous rock into sedimentary rock also turn sedimentary rock into metamorphic rock.
3. Melting-
All three varieties of rock have the ability to melt back into magma at any point, restarting the cycle.
Therefore, The rock cycle is an ongoing, participatory process. It has neither a beginning nor an end. The rock cycle involves the ongoing formation, modification, and reformation of rocks.
Hence, it is not a one-way process.
To know more about Rock Cycle visit:
https://brainly.com/question/29767269
#SPJ1
Which of the following environmental problems is most directly linked to ocean warming?
A
Coral bleaching
B
Beaching of whales and dolphins
C
Decreased global sea level
D
Decreased ocean sedimentation
the region of a continent that has been structurally stable for a long period of time is called the .
The region of a continent that has been structurally stable for a long period of time is called a craton. A craton is a large, stable block of the Earth's crust that has been relatively unaffected by tectonic activity for billions of years.
These regions are typically found in the interiors of continents and are characterized by thick, ancient rocks that have been folded and uplifted, but not significantly deformed or destroyed by tectonic forces. Cratons are important for understanding the evolution of the Earth's crust and the formation of continents.
They provide valuable information about the geological history of the planet and have been studied extensively by geologists and geophysicists. Some of the most well-known cratons include the Canadian Shield, the Siberian Platform, and the African Shield.
To know more about craton visit:
https://brainly.com/question/31380649
#SPJ11
The energy that drives the longshore currents is derived from:
a. hurricanes and cyclones.
b. major surface currents, such as the Gulf Stream.
c. monthly high tides.
d. wind waves approaching the beach front at an angle.
The energy that drives longshore currents is derived from wind waves approaching the beach front at an angle. As waves approach the shore, they create a zig-zag pattern that pushes water along the coast. This results in the development of a longshore current, which can be powerful enough to move sediment and create sandbars. Hurricanes and cyclones can contribute to the energy of longshore currents, but they are not the primary source. Major surface currents, such as the Gulf Stream, and monthly high tides do not directly drive longshore currents.
Longshore currents are generated when a "train" of waves reach the coastline and release bursts of energy. The speed at which waves approach the shore depends on sea floor and shoreline features and the depth of the water.A longshore current is a current that flows parallel to the shore within the zone of breaking waves. Longshore currents develop when waves approach a beach at an angle (Figure 12.37). Longshore currents cause sediment transport called longshore drift.
TO KNOW MORE ABOUT longshore currents CLICK THIS LINK -
brainly.com/question/29800365
#SPJ11