In the periodic table, when the atomic number increases, the properties of the elements repeat regularly is the true statement.
The periodic table is a table that groups all chemical elements into groups based on their unique atomic numbers. Periods and groups, respectively, are the terms used to describe the periodic table's horizontal rows and vertical columns. The present periodic chart's inventor, Henry Moseley, claimed that "the properties of elements are periodic functions of their atomic numbers." The elements' properties are characterized by periodic patterns along groups and throughout eras, as seen by the present periodic table. The elements in the periodic table are separated into four groups, or blocks. They are components of the blocks s, p, d, and f. The categorization is based on the naming of the orbitals that take the last electron.
To know more about atomic number visit:
https://brainly.com/question/8834373
#SPJ1
What is the valence of C?
Which statement about the number of protons and neutrons in a nuclear change is correct?
Responses
The total charge before and after the change remains the same, but the total atomic mass is different.
The relative numbers of protons and neutrons are the same before and after the change.
The relative numbers of protons and neutrons can differ before and after the change, but the total number of those particles remains the same.
The total atomic mass before and after the change remains the same, but the total charge is different.
Answer:
The correct statement about the number of protons and neutrons in a nuclear change is: "The relative numbers of protons and neutrons can differ before and after the change, but the total number of those particles remains the same."
Explanation:
In a nuclear change, the total number of protons and neutrons (also known as nucleons) remains constant, but the specific arrangement of those nucleons can change. This can be achieved through processes such as nuclear decay, where an unstable nucleus emits particles and becomes more stable, or through nuclear reactions, where two or more nuclei collide and rearrange to form new nuclei. In either case, the total number of protons and neutrons is conserved, but the specific numbers of protons and neutrons in the resulting nuclei can be different from the original nuclei.
It's important to note that the total atomic mass (also known as the atomic weight) and total charge of a nucleus can change as a result of a nuclear change. The atomic mass is determined by the total number of protons and neutrons in a nucleus, so it will be different if the relative numbers of those particles change. The total charge of a nucleus is determined by the number of protons, so it will be different if the number of protons changes.
What is the freezing point of a solution of 60 g of glucose dissolved in 80 g of water?
The freezing point of a solution of 60 g of glucose dissolved in 80 g of water is −7.74 oC.
The number of moles of glucose =Mass of glucose / Molecular weight of glucose
= 60 g /180 g/mol
= 0.333 mol
The molality of glucose solution =
Number of moles of glucose / Mass of solvent (in kg)
= 0.333 mol/ ( 80 g/ 1 kg/ 1000g)
= 4.163 mol/kg
The depression in the freezing point of glucose solution :
ΔTf=K fm
=1.86K kg /mol×4.163 mol/kg
=7.74 K
The freezing point of pure water is 0 o C
The freezing point of glucose solution
= 0−7.74
= −7.74 oC
Therefore, the freezing point of a solution of 60 g of glucose dissolved in 80 g of water is −7.74 oC.
To learn more about freezing point from the given link.
https://brainly.com/question/24314907
#SPJ4
Choose the words that make each statement true. A 6. 0 m solution contains 6. 0 of solute dissolved in one of solution. The m in 6. 0 m refers to. The concentration of a 6. 0 m solution may also be expressed as.
The m in 6.0 m refers to the molality of the solution, which is a measure of the amount of solute (in moles) dissolved in a given amount of solvent (in kilograms).
The concentration of a 6.0 m solution can also be expressed as 6 moles of solute per kilogram of solvent (6 mol/kg).The molality of a solution is important to consider when determining the concentration of a solution because it takes into account the mass of the solvent and the amount of solute dissolved.
For example, a 6.0 m solution would have a higher concentration than a 3.0 m solution, even though they both contain the same amount of solute. This is because the 6.0 m solution has twice as much solute dissolved in the same amount of solvent.
In addition to giving the concentration of a solution, the molality can also be used to calculate the freezing point depression, boiling point elevation, and osmotic pressure of a solution. Knowing the molality of a solution can therefore be very useful in many different applications.
Learn more about molality at : https://brainly.com/question/26921570
#SPJ4
Draw three possible monohalogenation products for this reaction. A Brz (1 equiv) hv 1 1 1 . 1 . . Draw a 3° Product Select to Draw 10 Product + Work Screen Bry (1 equiv) hv 1 1 1 . Draw a 3° Product + Select to Draw zoaleri Product 1 1 1 1 1 1 . . Draw a 2° Product .
Three possible monohalogenation products for this reaction are (Z)-2-bromohex-2-ene, (R)-3-bromo-3-methylcyclohex-1-ene, and (1R,4R)-1,4-dibromocyclohexane.
A substance can be monohalogenation chemically by adding one or more halogens to it. This type of transformation is essential for the production of polymers and pharmaceuticals, among other things, due to the extensive occurrence of compounds containing halides. [1] In fact, this kind of conversion happens so frequently that it is challenging to give a whole explanation. This article's main focus is on how elemental halogens are used in halogenation (F2, Cl2, Br2, I2). Halogen acids and halide salts are commonly used to introduce halides. For the purpose of adding halogens to diverse substrates, including thionyl chloride, a wide range of specialized reagents are available. There are several ways to halogenate organic molecules, including the halogen addition process, electrophilic halogenation, free radical halogenation, and ketone halogenation. The substrate's characteristics determine the route. The halogen has an impact on the halogenation facility. Fluorine and chlorine are more vigorous halogenating agents and are more electrophilic. Iodine is the least reactive of all the halogenating agents, while bromine is weaker than both fluorine and chlorine.
To know more about monohalogenation please refer: https://brainly.com/question/29851027
#SPJ4
predict the major product for each of the following reactions
4-Chlorobut-1-ene with HBr (a)
In this reaction, an alkene is present. Thus, there will be an addition reaction in which the most substituted carbon will get the addition of the nucleophile "". Here, carbon 3 results in 3-bromo-1-chlorobutane.
1-Chlorobut-1-ene with HBr (b)
We additionally have an alkene in this reaction. Thus, there will be an addition reaction in which the most substituted carbon will get the addition of the nucleophile "". Here, carbon 2 creates 2-bromo-1-chlorobutane.
(c) H2O, H+, and 4,4-Dimethylcyclopentene
In this reaction, an alkene is present. Thus, there will be an addition reaction in which the most substituted carbon will get the addition of the nucleophile "". 3,3-dimethylcyclopentan-1-ol is produced in this instance from carbon 3.
Propyne with 2HCl (d)
In this reaction, an alkyne is present. We will therefore experience an additional reaction.
To learn more about reaction please click on below link
https://brainly.com/question/28984750
#SPJ4
I need help finding the answer to this question
Answer:
1.1 for 3d, 0.76 for 16d.
Explanation:
You divide the mass of one nail by the nail size.... I think
A material is said to be ductile if it
a. can be pulled out, or drawn, into a long wire
b. can be hammered or rolled into flat sheets and other shapes
c. can transfer heat or electricity to another material
d. is a mixture of a metal with at least one other element
A material is said to be ductile if it can be hammered or rolled into flat sheets and other shapes
What is ductility?
A material's susceptibility to drawing is how the mechanical feature of ductility is most frequently defined (e.g. into wire). The degree to which a material can withstand plastic deformation under tensile stress before failing is known as ductility in the field of materials research. In engineering and manufacturing, ductility is a crucial factor. It specifies a material's ability to withstand mechanical overload and its appropriateness for specific manufacturing processes, including cold working. Gold and copper are two examples of metals that are typically referred to as ductile. However, not all metals are brittle, since some, like cast iron, are capable of ductile failure. Polymers can commonly be thought of as ductile materials since they frequently permit plastic deformation.Therefore, A material is said to be ductile if it can be hammered or rolled into flat sheets and other shapes
To learn more about ductility click on the link
https://brainly.com/question/828860
#SPJ1
Convert the following Fischer projections to perspective formulas.
By using the Fischer Projections, we may depict 3D molecule structures in a 2D setting without affecting their characteristics or structural integrity.
The Fischer Projection is made up of both horizontal and vertical lines, where the horizontal lines stand in for atoms that are pointing in the viewer's direction and the vertical lines for the opposite. The central carbon is shown as the intersection of the horizontal and vertical lines.
The asymmetric carbon atom is located at the line's intersection in the Fischer projection, which resembles a cross. The horizontal lines are seen as wedges or bonds that extend outward in the direction of the viewer. The vertical lines are projected as dashed lines away from the spectator.
Figures a, b, and c hold the molecule such that the chiral center (C), two bonds, which are on a horizontal plane, are coming out of the plane of the paper, and the three remaining bonds, which are on a vertical plane, is going into the plane of the paper.
Hold the molecule as shown in figure (d) so that the two chiral centers (i.e., C) are on the paper's plane, four bonds are coming out of the paper's plane and are on a horizontal plane, and the final two bonds are entering the paper's plane and are on a vertical plane.
To learn more about Fischer projection, please refer:
https://brainly.com/question/29615238
#SPJ4
The number of electron energy levels in a magnesium atom is
12345
Three levels of electron energy are present in the magnesium atom (shells).
Magnesium and aluminum are a desired alloy because it combines strength and lightweight while having a lower density than aluminum. All cells and almost 300 enzymes depend on this element, which is the tenth most prevalent element by mass in the human body. An atom's mass is its atomic mass. Because it relates to the mass of a single particle, the atomic mass or relative isotopic mass is associated with a particular isotope of an element. Magnesium has an atomic mass of 24.305 u. Magnesium's typical isotopes have masses of 24, 25, and 26. 12 is the atomic number.
To know more about Magnesium please click on the link brainly.com/question/1533548
#SPJ4
If you needed to determine the density of a liquid sample, what type of equipment would be needed?.
Answer:
the equipment needed to determine the density of a liquid sample is HYDROMETER or AEROMETER .
Explanation:
HYDROMETER is a device which measures the specific gravity( relative density) of a liquid sample. it does not give us direct density .
it is the ratio of the density of liquid to the density of water .
a hydrometer is made up of glass. also,it consists a cylindrical stem and bulb which is weighed with mercury(Hg) or lead(Pb) shot so that it can float .
for more information regarding density:
https://brainly.com/question/30082442
Answer:
To determine the density of a liquid sample, you would need a hydrometer.
Explanation:
A hydrometer is an instrument used to measure the density or specific gravity of a liquid.
It works by using the principle of buoyancy, where an object will be buoyed up, or pushed to the surface, by a force that is equal to the weight of the fluid displaced by the object.
The hydrometer has a weighted bulb at one end and a graduated stem. The weighted bulb is placed in the sample liquid and the stem is read to determine the density of the sample.
To learn more about hydrometer
https://brainly.com/question/23713573
Biomolecules are essential organic molecules which are involved in the maintenance and metabolic processes of living organisms. Biomolecules include carbohydrates, lipids, proteins, and nucleic acids. These vary in composition, structure, and function. Select all of the choices that correctly pairs the biomolecule and one of its functions.
A. Carbohydrates - energy storage
B. Lipids - structural support
C. Proteins - transport molecules
D. Nucleic acids - genetic information
Which compound matches the IR spectrum? 1-hexen-3-ol 1-methylcyclopentene 3-hexanol 1.5-hoxadiene cylohexane trans-4-octene dipropyl ether Which compound matches the IR spectrum? cyclohexane dipropyl ether 1-hexen-3-ol 1.5-hoxadiene 3-hexanol trans-4-octene 1-methylcyclopentene Which compound matches the IR spectrum? dipropyl ether cyclohexane 1.5-hexadiene trans-4-octene 3-hexanol 1-hexen-3-ol 1-methylcyclopentene
IR Spectroscopy measures the vibrations of atoms, and based on this it is realizable to determine the functional groups.
What shows on an IR spectrum?
CO, absorb in the IR spectrum. More compound molecules have many bonds, and their fluctuation spectra are correspondingly more composite, i.e. big molecules have many peaks in their IR spectra., stronger bonds and light atoms will vibrate at a high extended frequency
Nature rules that only bonds that carry dipoles can absorb infrared light. C-C bonds are normally nonpolar and usually do not show up as summit in the IR spectrum.
So we can conclude that The chart above shows a spectrum in transmission mode.
Learn more about spectrum here: https://brainly.com/question/1968356
#SPJ1
a substance that resists changes in ph is referred to as a(n) _____.
A substance that resists changes in pH is referred to as a buffer.
What is a buffer?A buffer is a substance that resists changes in its pH when a small quantity of a strong acid or base is added to it.
Buffers are usually prepared from solutions of a weak acid and its conjugate base or a weak base and its conjugate acid.
Buffers are usually found in living organisms as they help living organisms maintain homeostasis.
Some of the buffers found in living organisms include:
the bloodthe bicarbonate bufferhemoglobin buffer,phosphate buffer, proteins,and ammonium buffer.The pH of a solution measures the acidity or basicity of the solution.
pH values less than 7 are acidic, while pH values greater than 7 are basic, A pH of 7 is neutral.
Learn more about buffers at: https://brainly.com/question/1385846
#SPJ1
A student conducted an investigation to determine the effect of water temperature on the amount of sugar that dissolves in a beaker of water. Identify components for trial 1 of this investigation.
The following data from an experiment to ascertain the effect of water temperature on the amount of sugar that dissolves in a beaker of water were present, and the following components were to be identified:
Water content (mL) - constant Amount of Sugar's temperature is constant. The water's temperature (°C) is variable. Sugar dissolved in water (g): variesThe experiment is divided into three main sections:
Independent variable: These are the factors that the researcher modifies or manipulates to observe the impact on the dependent variable. The temperature of the water acts as an independent variable in this experiment since it influences how much sugar dissolves.Dependent variables :the variables that vary along with and in response to changes in the independent variables. The dependent variable in this experiment is the amount of sugar that dissolves as a function of the change in water temperature.Constant or control: these are the elements that remain the same throughout the experiment, preventing any additional influences from having an impact on the dependent variableSo, the correct answer is -
Water content (mL) - constantAmount of Sugar's temperature is constant.The water's temperature (°C) is variableSugar dissolved in water (g): varies.To know more Independent variable click on below link:
https://brainly.com/question/1479694#
#SPJ4
Complete question:
A student conducted an investigation to determine the effect of water temperature on the amount of sugar that dissolves in a beaker of water. Identify components for trial 1 of this investigation.
Problem 7.60 What are the products of the following reactions? Part A + Cl excess CH2Cl2
The product of the chemical equation involving methane and chlorine will subsequently form CH₂Cl₂ which on further reaction with chlorine will form CCl₄.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
The chemical equations involved are CH₄ +Cl₂[tex]\rightarrow[/tex]CH₃Cl +HCl
CH₃Cl +Cl₂[tex]\rightarrow[/tex]CH₂Cl₂ +HCl
CH₂Cl₂+Cl₂[tex]\rightarrow[/tex]CHCl₃+HCl
CHCl₃+Cl₂[tex]\rightarrow[/tex]CCl₄+HCl
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ4
Which will show maximum depression in freezing point when concentration is 0.1 and?
When the concentration of a substance is 0.1, the freezing point depression will be the maximum.
What is freezing point?The temperature when a substance changes into a solid is known as the freezing point.. It is the point when the molecules in a liquid gain enough energy to form solid crystals and form a solid. Freezing point depends on the type of substance and the pressure. For example, water freezes at 0°C (32°F) at 1 atmosphere of pressure. However, some substances freeze at temperatures below 0°C and some substances do not freeze solid at all. The freezing point of a substance is an important physical property that can be used to identify it.
This is because the freezing point depression increases with the increase in concentration. The freezing point depression for a 0.1 molar solution is approximately 1.86°C. This means that the freezing point of a 0.1 molar solution is 1.86°C lower than the freezing point of pure solvent. This effect is due to solutes interfering with the hydrogen bonding between molecules of the solvent and therefore decreasing the freezing point.
To learn more about freezing point
https://brainly.com/question/24314907
#SPJ4
Select the intermolecular forces present in water. lon-dipole H-bonding Dipole-dipole London Dispersion Question 9 2 pts Select the intermolecular forces present in dichloromethane. H-bonding London Dispersion lon-dipole Dipole-dipole
intermolecular forces present in water
1- H bonding 2- Dipole Dipole interaction 3- London dispersion forces.
Polar O-H bonds exist in water. The negative O atoms in nearby molecules attract the positive H atoms, resulting in the unexpectedly powerful type of dipole-dipole force known as a hydrogen bond. Water has dipole-induced dipole and London dispersion forces because it has hydrogen bonds.As a result, the intermolecular forces in water are -1- Hydrogen bonding 2-Dipole interaction 3- Dispersion forces in London.Dipole-dipole conversations are sluggish interactions that take place when perpetual or induced dipoles arrive into close vicinity. These forces are referred to collectively as Dipole - Dipole interaction. Proteins contain large quantities of the these interactions, the resilience of which varies greatly. Polar molecules are diplexer molecules that are abundant in nature.
To learn more about intermolecular here:
https://brainly.com/question/9007693
#SPJ4
What is the shape of the oval symbol?
The shape of oval symbol is a ellipse.
The oval shape symbol depict a elliptical path. Except in the context of projective geometry, the term "oval" as used to describe curves in geometry is not well defined. Commonly referred to as ovals or described as having a "oval shape," several unique curves. Typically, a planar curve must resemble the shape of an egg or an ellipse in order to be referred to as an oval. These unique characteristics of ovals are typical:
They have a shape that is similar to that of an ellipse, are differentiable (smooth-looking), simple (not self-intersecting), convex, closed, planar curves, and an axis of symmetry would often exist in an oval, but it is not necessary.
To know more about oval, click here,
brainly.com/question/10684783
#SPJ4
HOW TO DRAW STRUCTURE OF BrF2+AND HOW MANY Valence Electron It Have?
structure BrF₂ attached below and it have 20 electron valency.
The BrF₂⁺ Lewis structure: how to draw it?The Lewis structure of BrF₂⁺ can be illustrated as follows:
Take the valence electron count as the first step.
With 7 valence electrons each, the halogens bromine and fluorine belong to the 17th group of the periodic table.
The bromine atom in BrF₂ has 7 outermost valence shell electrons.
BrF₂ has 7 electrons in the fluorine atom's outermost valence shell.
Due to the presence of two fluorine atoms in bromo difluoride, a total of 7+7(2) = 21 valence electrons are available. and BrF₂⁺ means it donate their proton so there gonna be 20 valence electron.
The second step is to place the least electronegative atom possible in the middle of the molecule.
From the top of the group in the periodic table to the bottom, the value of electronegativity drops. Therefore, the electronegative value of bromine is lower than that of fluorine.
The bromine atom is preserved in the middle of the molecule and is surrounded by two fluorine atoms since it has the least electronegativity.
Then Place two electrons to symbolize a link between the atoms.
Of order for the atoms in a BrF₂⁺ molecule to make bonds with one another, place two electrons between each bromine and fluorine atom.
The remaining unbonded electrons are divided among the atoms to complete the octet.
The BrF₂⁺ molecule contains a total of 20 valence electrons. Four of these are utilised to form bonds with the bromine and fluorine atoms, leaving the remaining 16 electrons unconnected.
To complete the octet, each fluorine atom needs six non-bonded electrons and two electrons from the single bond it created with bromine. The BrF₂⁺ molecule requires 12 non-bonded electrons because it contains two fluorine atoms.
The central bromine atom will continue to receive the remaining five unbonded electrons, and four additional electrons will be used to create the single bond with the fluorine atoms. As a result, bromine gains a total of nine electrons, expanding into an octet.
Learn more about lewis structure here at: https://brainly.com/question/20300458
#SPJ4
How many cells contain the same text as the red oval?
The cells contain the same text as red oval are 5.
A string is a sort of data in computer science that contains sequences of characters, some of which can take the form of series of integers.
With the exception of the last shape at the bottom right of the figure, all of the forms in the choice have a string of numbers that correspond to the red oval shape.
As a result, we can infer that there are 5 forms that share the same string as the red oval.
Thus, computer science can help solve problem related to complex mathematics with ease.
To know more about strings, click here:
brainly.com/question/25965491
#SPJ4
NH: H0+ NH4 SO,2- CHCl3 Crude Sketch Calculations (# of valence electrons, # of bonds, etc. Lewis Structure #electron groups, electron group geometry # of bonded atoms, molecular shape Resonance structures (if any) Polar or nonpolar
The compound NH₄⁺ is tetrahedral in geometry and is non-polar. SO₂ is polar in nature and has a bend shape. CHCl₃ is tetrahedral and it is polar.
What are polar compounds?Polar compounds are those having a permanent dipole moment. When the atoms bonded together have significant difference in electronegativity the electrons will attracts more to the highly electronegative atom and there occurs a net dipole moment results in polarity.
The ammonium ion NH₄⁺ is a tetrahedral molecule having no polarity. The dipole moments cancel each other due its tetrahedral nature. SO₂ is bend in geometry due to the presence of lone pair of electrons on oxygen atom. It is a polar compound.
The compound trichloromethane has a net dipole moment and it is polar with a tetrahedral structure.
To find more on polar compounds, refer here:
https://brainly.com/question/14752836
#SPJ4
What common food reacts with pewter and was once thought to be poisonous?
Many Europeans were afraid of the tomato in the late 1700s. The fruit was given the moniker "poison apple" because it was believed that aristocracy consumed them and became ill and died, but the truth was that wealthy Europeans used pewter plates, which contained a lot of lead.
What is Poisonous food?
People can become unwell from something they ate or drank and contract food poisoning, one type of foodborne illness. The germs or other toxic components in the meal or drinks are the causes.
Vomiting, diarrhoea, and upset stomach are common signs of food poisoning. Typically, after ingesting the dish, symptoms appear hours or even days later. Most people only suffer minor illnesses, which heal on their own.
Food poisoning can occasionally result in serious sickness or consequences.
All foodborne infections are generally referred to as "food poisoning." To be more particular, a healthcare professional might use the following terms:
All infections caused by tainted food or drink are referred to as "foodborne illnesses."
Toxin-related disease is referred to as "food poisoning" in this context. One sort of foodborne illness is food poisoning.
Learn more about Poisonous food from given link
https://brainly.com/question/15088726
#SPJ4
2.3581 x 10³
pls help
Answer:
2358.1
Explanation:
I just pressed the calculator :]
10³ = 1000
2.3581 × 1000
=2358.1
Sorry if this didn't help you :)
What is the next step in the process after a substrate enters the active site of an enzyme the chemical reaction occurs?
The chemical reaction takes place when a substrate is chemically altered by an enzyme after entering the active site of the enzyme.
At the enzyme's catalytic site, which is where the reaction takes place, this chemical modification of the substrate occurs. The substrate may engage in a number of chemical reactions at the catalytic site, such as the transfer of a chemical group or the breaking or forming of chemical bonds. The enzyme and the substrate in question determine the specific kind of chemical reaction that occurs.
One or more products are produced as a result of the chemical modification of the substrate and are then released by the enzyme. The chemical is then accessible to tie and catalyze the response with extra substrate atoms.
Learn more about Enzymes here:
https://brainly.com/question/14577353
#SPJ4
Review how scientific ideas change with time.
Answer:
experiments which gases that first became possible at the turn of the nineteenth century legend Dalton in 1803 to propose a modern theory of the atom based on the how did the following assumptions
When 0.6 g of urea is dissolved in 100g of water the solution will boil at immersive reader 1 point?
Boiling point of solution when 0.6 g of urea is dissolved in 100g of water, is 100.052°C.
What is solution?A solution in chemistry is a specific kind of homogenous mixture made up of two or more components. A solute is a material that has been dissolved in the solvent in such a combination. If there are more attractive interactions between the solvent and solute particles than between the solute particles themselves, the solvent particles will surround and separate the solute particles. The particles of the solute that are enclosed by the solid solute subsequently disperse into the solution.When a chemical is added, the boiling point of a liquid (a solvent) will rise, a phenomenon known as boiling-point elevation, which implies that a solution has a higher boiling point.The existence and quantity of dissolved particles have an impact on the boiling point elevation, but the identification of the dissolved particles has no bearing on this attribute.It results from the solvent being diluted when a solute is present. This phenomena is independent of any particular solute-solvent interactions and happens for all solutes in all solutions, even perfect solutions.When the solute is both an electrolyte (like different salts) and a non-electrolyte, the boiling point rises.Urea mass = 0.6 g
Water's mass is 100 g, or 0.1 kg, and its molarity is 0.6/60*0.1, or 0.1 M.
Boiling point increase = Tb
Boiling point of the solution is calculated as Kb*m = 0.52*0.1 = 0.052 K.
Pure water has a boiling point of T = 373 K.
Tb = Tb - T Tb
= Tb + T 373 + 0.052
= 373.052 K
= 100.05 °C
Consequently, the solution's boiling point is 100.052°C.
To know m ore about boiling point of solutions from given link
brainly.com/question/24675373
#SPJ4
Complete question: When 0.6g of urea dissolved in 100g of water, the water will boil at (Kb for water=0.52kJ.mol −1 and normal boiling point of water =100 ∘ C).
A sample of 0. 0255 mol potassium hydroxide, koh, was dissolved in water to yield 10. 0 ml of solution. Which amount would you need to change to solve for molarity?.
Explanation:
To solve for molarity, you would need to change the volume of the solution.
Molarity is a measure of concentration in a solution, and it is calculated by dividing the number of moles of solute (in this case, potassium hydroxide) by the volume of the solution (in liters). The molarity of a solution is usually represented by the symbol "M".
In the given sample, the number of moles of potassium hydroxide (KOH) is 0.0255 mol, and the volume of the solution is 10.0 ml. To solve for the molarity of the solution, you would need to convert the volume from milliliters to liters, and then divide the number of moles of KOH by the volume of the solution in liters to calculate the molarity.
For example, to solve for the molarity of the solution, you could use the following formula:
M = (0.0255 mol KOH) / (10.0 ml / 1000 ml/L)
= 0.00255 M
This would give you the molarity of the solution as 0.00255 M.
taffi is majoring in chemical engineering. she often finds herself placed in stereotyped and restricted roles by her professors and fellow students, but in ways that seem superficially positive. what is taffi experiencing?
Taffi frequently finds herself being cast by her teachers and fellow students in stereotyped and constrained roles, albeit ones that on the surface appear to be favourable. She is a victim of benevolent sexism.
Describe sexism.Sexism is bias or discrimination against someone based on their gender or sex. Although it can effect anybody, sexism particularly harms women and young girls. The idea that one sex or gender is inherently superior to another has been connected to stereotypes and gender roles.
What exactly is benevolent sexism?Aspects of benevolent sexism include the value placed on gender-stereotypically feminine traits in women (such as nurturing) and the conviction that traditional gender roles are required for cohesion. Paternalism, or the idea that men should protect women, is another example of benevolent sexism.
To learn more about stereotypes visit:
brainly.com/question/29319701
#SPJ1
The given question is incomplete. The complete question is:
Taffi is majoring in chemical engineering. She is treated differently because of stereotyped behavior and restrictiveness in her role as a student in this major, often in a way that seems superficially beneficial. What is Taffi experiencing?
A. stereotype threat
B. benevolent sexism
C. racism
D. hostile sexism
Taffi constantly observes that her instructors and classmates cast her in stereotypical and limited roles, despite the fact that these roles initially seem to be positive. She is a target of benevolent sexism.
Explain sexism.Bias or discrimination against someone because of their gender or sex is known as sexism. Although it affects everyone, sexism has a negative impact on women and young girls in particular. Stereotypes and gender roles have been linked to the notion that one sex or gender is intrinsically superior to another.
What does benevolent sexism actually mean?The value placed on gender-stereotypically feminine attributes in women (such nurturing) and the idea that traditional gender roles are necessary for cohesion are examples of benign sexism. Another is paternalism, which is the notion that men should defend women.
To learn more about stereotypes visit:
brainly.com/question/29319701
#SPJ1
The given question is incomplete. The complete question is:
Taffi is majoring in chemical engineering. She is treated differently because of stereotyped behavior and restrictiveness in her role as a student in this major, often in a way that seems superficially beneficial. What is Taffi experiencing?
A. stereotype threat
B. benevolent sexism
C. racism
D. hostile sexism
What is Scope 1 and 2 emissions?
Scope 1 emissions are greenhouse gas (GHG) emissions that are directly caused by an organization's activities. Scope 2 emissions are GHG emissions that result from the generation of electricity, heat, or steam that an organization consumes.
Scope 1 emissions are greenhouse gas (GHG) emissions that are directly caused by an organization's activities. These emissions are emitted from sources that are owned or controlled by the organization, and are a result of the organization's operations. Examples of scope 1 emissions include emissions from fuel combustion in company-owned vehicles and emissions from on-site fuel-fired boilers or heaters.
Scope 2 emissions are GHG emissions that result from the generation of electricity, heat, or steam that an organization consumes. These emissions are often referred to as "indirect emissions" because they are not directly emitted by the organization itself, but rather by the source of the energy that the organization consumes. For example, if an organization consumes electricity from a coal-fired power plant, the emissions from the power plant's fuel combustion would be considered scope 2 emissions for the organization.
Scope 1 and 2 emissions are often referred to as "direct emissions" because they are caused directly by the activities of the reporting organization. In contrast, scope 3 emissions, also known as "other indirect emissions," are those that result from activities that are not under the control or ownership of the reporting organization, but are a part of its value chain.
To know more about scope 3
https://brainly.com/question/29546969
#SPJ4